6:40 a.m.
Hi all,
cleanups - and more... ;-)
!!!Important!!!
For those of you, who have installed any previous versions - 1st:
#>ipkg remove freifunk-batman-de
For others:
freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
It allows to easily configure and manage all aspects of the batman-daemon in a
side-by-side environment with olsr (even for unskilled users).
The main target have been users in the berlin-freifunk community (104/8 net). The main
goal is to raise the amount of batman-nodes in 'a mesh' of heterogeneous skilled
node owners over 'the critical-mass' in the phase of development and testing...
and of course, to make it easy for myself to manage testing with 10++ batman-nodes.
If the interface-config of your hardware differ from those of the Linksys wrt54g
v2++/wrt54gl/...(->[2])
you have to use freifunk-batman-*std*-de...
Find it at: http://freifunk.schmudde.com/ipkg
Regards
Lui
[1] - http://ff-firmware.sourceforge.net/
[2] -
http://wiki.openwrt.org/OpenWrtDocs/Configuration#head-b62c144b9886b221e0...
5:27 p.m.
hi lui,
the batstat looks quite nice!
the animation is also a little eye candy
but the output of "ip route" is still hardcoded to an 105.* address range
can you fix this in the next version? we use 103.* ... you should already
know ... but in general it is better to make the fiilter dynamic, referred
to the used network
good job, thx!
have a nice weekend
felix
_________________________________________________________________
Haben Spinnen Ohren? Finden Sie es heraus mit dem MSN Suche Superquiz via
http://www.msn-superquiz.de Jetzt mitmachen und gewinnen!
9:10 p.m.
Hi,
I also believe hard coded address ranges should not be, but despite that I
would like to ask whether it would be possible for you to move over to the
105 address range. This would also help to once link the clouds together.
Another point is, that there is also a batman-experimental project in
development which comes up with some new features to measure link quality and
apply strange routing metrics and I thought that in case it would ever be
employed it could use the 103 address range to avoid routing conflicts.
best regards,
axel
On Friday, 12. January 2007 18:27, Felix Bolte wrote:
but the output of "ip route" is still hardcoded to an 105.*
address range
can you fix this in the next version? we use 103.* ... you should already
know ... but in general it is better to make the fiilter dynamic, referred
to the used network
4:49 a.m.
New subject: [B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk
Hi,
freifunk-batman_0.83.ipk is out now.
hope it's usefull
Lui
CHANGES:
# ----------------------------------------------------------------------------
ToDo:
* Info: better representation of status and link-relations...
* Translations: it-fr-nl-<place your language here>
* Config: 'choosing' a prefered gateway
* ...
* keep close to the hight development-cycles of batmand ;-)
* watching out for B.A.T.M.A.N.-IV ;-)
Changes (0.82 -> 0.83)
+ "Raider is Twix" and S55batman is S66batman now - lowers a timestamp problem
with S60rdate
+ removed S54(/S65)robin
Changes (0.81 -> 0.82)
+ replaced option d|debug with log... (S55batman log <mode> <time>)
+ fixed cron entry + added tun-ex
+ added: S55... v like batmand -v
Changes (0.80 -> 0.81)
+ use /etc/ff_bat.config and remove extensive use of nvram (/-commit)
+ language *switch* via config...
+ layout issues
Changes (0.7x -> 0.80)
+ (merged) support for non-WRT like hardware (i.e SE505) and tagged-vlans...
+ community network support: choose olsr->batman network (/8 /16 /24) transition.
+ multi language support: de, en (please help with your addional translations)
+ status-page with links to known nodes
+ B.A.T.M.A.N.-III v0.2++ client-mode info on router-frontpage
+ S55batman initscript opens by default traceroute ports
+ re-designed bad handling of NVRAM-vars
# ----------------------------------------------------------------------------
...this last informations are still valid:
Sent: Freitag, 12. Januar 2007 07:40
To: B.A.T.M.A.N.-ML
Subject: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")
Hi all,
cleanups - and more... ;-)
!!!Important!!!
For those of you, who have installed any previous versions - 1st:
#>ipkg remove freifunk-batman-de
For others:
freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
It allows to easily configure and manage all aspects of the
batman-daemon in a side-by-side environment with olsr (even
for unskilled users).
[...]
The main goal is to raise the amount of
batman-nodes in 'a mesh' of heterogeneous skilled node owners
over 'the critical-mass' in the phase of development and
testing... and of course, to make it easy for myself to manage
testing with 10++ batman-nodes.
[...]
Find it at: http://freifunk.schmudde.com/ipkg
Regards
Lui
[1] - http://ff-firmware.sourceforge.net/
8:43 a.m.
New subject: [B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk
Does it work on the Fonera?
On 3/31/07, Lui <batman(a)schmudde.com> wrote:
Hi,
freifunk-batman_0.83.ipk is out now.
hope it's usefull
Lui
CHANGES:
#
----------------------------------------------------------------------------
ToDo:
* Info: better representation of status and link-relations...
* Translations: it-fr-nl-<place your language here>
* Config: 'choosing' a prefered gateway
* ...
* keep close to the hight development-cycles of batmand ;-)
* watching out for B.A.T.M.A.N.-IV ;-)
Changes (0.82 -> 0.83)
+ "Raider is Twix" and S55batman is S66batman now - lowers a timestamp
problem with S60rdate
+ removed S54(/S65)robin
Changes (0.81 -> 0.82)
+ replaced option d|debug with log... (S55batman log <mode> <time>)
+ fixed cron entry + added tun-ex
+ added: S55... v like batmand -v
Changes (0.80 -> 0.81)
+ use /etc/ff_bat.config and remove extensive use of nvram (/-commit)
+ language *switch* via config...
+ layout issues
Changes (0.7x -> 0.80)
+ (merged) support for non-WRT like hardware (i.e SE505) and tagged-vlans...
+ community network support: choose olsr->batman network (/8 /16 /24)
transition.
+ multi language support: de, en (please help with your addional
translations)
+ status-page with links to known nodes
+ B.A.T.M.A.N.-III v0.2++ client-mode info on router-frontpage
+ S55batman initscript opens by default traceroute ports
+ re-designed bad handling of NVRAM-vars
#
----------------------------------------------------------------------------
...this last informations are still valid:
>Sent: Freitag, 12. Januar 2007 07:40
>To: B.A.T.M.A.N.-ML
>Subject: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")
>
>Hi all,
>
>cleanups - and more... ;-)
>
>!!!Important!!!
>For those of you, who have installed any previous versions - 1st:
>#>ipkg remove freifunk-batman-de
>
>For others:
>freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
>It allows to easily configure and manage all aspects of the
>batman-daemon in a side-by-side environment with olsr (even
>for unskilled users).
>[...]
>The main goal is to raise the amount of
>batman-nodes in 'a mesh' of heterogeneous skilled node owners
>over 'the critical-mass' in the phase of development and
>testing... and of course, to make it easy for myself to manage
>testing with 10++ batman-nodes.
>
>[...]
>
>Find it at: http://freifunk.schmudde.com/ipkg
>
>Regards
>Lui
>
>[1] - http://ff-firmware.sourceforge.net/
_______________________________________________
B.A.T.M.A.N mailing list
B.A.T.M.A.N(a)open-mesh.net
https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
--
Benjamin Henrion <bhenrion at ffii.org>
FFII Brussels - +32-484-566109 - +32-2-4148403
3:18 p.m.
New subject: [B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk
Hi,
yes batman works greatly on the fonera,
I tested the 0.2.0a version with kamikaze
in a mesh of 2 laptop and 4 fonera configuring
them with the xwrt page that I made (webif-batman package).
In attach some outputs of the test.
Cheers,
happy easter,
Fabio
On Sat, 2007-03-31 at 10:43 +0200, bh(a)udev.org wrote:
Does it work on the Fonera?
On 3/31/07, Lui <batman(a)schmudde.com> wrote:
> Hi,
>
> freifunk-batman_0.83.ipk is out now.
>
> hope it's usefull
> Lui
>
> CHANGES:
> #
> ----------------------------------------------------------------------------
>
> ToDo:
> * Info: better representation of status and link-relations...
> * Translations: it-fr-nl-<place your language here>
> * Config: 'choosing' a prefered gateway
> * ...
> * keep close to the hight development-cycles of batmand ;-)
> * watching out for B.A.T.M.A.N.-IV ;-)
>
> Changes (0.82 -> 0.83)
> + "Raider is Twix" and S55batman is S66batman now - lowers a timestamp
> problem with S60rdate
> + removed S54(/S65)robin
>
> Changes (0.81 -> 0.82)
> + replaced option d|debug with log... (S55batman log <mode> <time>)
> + fixed cron entry + added tun-ex
> + added: S55... v like batmand -v
>
> Changes (0.80 -> 0.81)
> + use /etc/ff_bat.config and remove extensive use of nvram (/-commit)
> + language *switch* via config...
> + layout issues
>
> Changes (0.7x -> 0.80)
> + (merged) support for non-WRT like hardware (i.e SE505) and tagged-vlans...
> + community network support: choose olsr->batman network (/8 /16 /24)
> transition.
> + multi language support: de, en (please help with your addional
> translations)
> + status-page with links to known nodes
> + B.A.T.M.A.N.-III v0.2++ client-mode info on router-frontpage
> + S55batman initscript opens by default traceroute ports
> + re-designed bad handling of NVRAM-vars
> #
> ----------------------------------------------------------------------------
>
> ...this last informations are still valid:
>
> >Sent: Freitag, 12. Januar 2007 07:40
> >To: B.A.T.M.A.N.-ML
> >Subject: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")
> >
> >Hi all,
> >
> >cleanups - and more... ;-)
> >
> >!!!Important!!!
> >For those of you, who have installed any previous versions - 1st:
> >#>ipkg remove freifunk-batman-de
> >
> >For others:
> >freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
> >It allows to easily configure and manage all aspects of the
> >batman-daemon in a side-by-side environment with olsr (even
> >for unskilled users).
> >[...]
> >The main goal is to raise the amount of
> >batman-nodes in 'a mesh' of heterogeneous skilled node owners
> >over 'the critical-mass' in the phase of development and
> >testing... and of course, to make it easy for myself to manage
> >testing with 10++ batman-nodes.
> >
> >[...]
> >
> >Find it at: http://freifunk.schmudde.com/ipkg
> >
> >Regards
> >Lui
> >
> >[1] - http://ff-firmware.sourceforge.net/
>
> _______________________________________________
> B.A.T.M.A.N mailing list
> B.A.T.M.A.N(a)open-mesh.net
> https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
>
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Fai crescere i tuoi sogni. Prestiti semplici e veloci
* Rate da 20 euro al mese
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=6334&d=6-4
3:15 p.m.
New subject: [B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk
Hello, Lui and everyone.
Thank you for your kind work. I've tried.
machine: buffalo whr-hp-g54 x 2
http://www.buffalo-technology.com/products/product-detail.php?productid=1...
one as gateway node (gw) and another as only node (nd)
It seems to work well.
gw:
<nvram>
ff_bat_cron=on
ff_bat_gw_uplink=11
ff_bat_netmig=192.168.1/192.168.2
ff_bat_ran_if=eth1:bat
ff_bat_ran_ip=192.168.2.1
ff_bat_ran_on=1
ff_bat_ran_pf=24
ff_bat_start=1
root@freifunk-batman1:~# ps |grep batman
1157 root 400 S batmand -g 11 eth1:bat
1162 root 400 S batmand -g 11 eth1:bat
1164 root 400 S batmand -g 11 eth1:bat
1168 root 400 S batmand -g 11 eth1:bat
2241 root 420 R grep batman
root@freifunk-batman1:~# ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2): 56 data bytes
64 bytes from 192.168.2.2: icmp_seq=0 ttl=64 time=1.9 ms
64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=1.4 ms
64 bytes from 192.168.2.2: icmp_seq=2 ttl=64 time=1.4 ms
64 bytes from 192.168.2.2: icmp_seq=3 ttl=64 time=1.4 ms
nd:
<nvram>
ff_bat_cron=on
ff_bat_gw_choose=2
ff_bat_gw_uplink=0
ff_bat_netmig=192.168.1/192.168.2
ff_bat_ran_if=eth1:bat
ff_bat_ran_ip=192.168.2.2
ff_bat_ran_on=1
ff_bat_ran_pf=24
ff_bat_start=1
root@freifunk-batman2:~# ps |grep batman
7236 root 472 S batmand -r 2 eth1:bat
7239 root 472 S batmand -r 2 eth1:bat
7240 root 472 S batmand -r 2 eth1:bat
20048 root 268 S grep batman
root@freifunk-batman2:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1): 56 data bytes
64 bytes from 192.168.2.1: icmp_seq=0 ttl=64 time=3.4 ms
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=1.4 ms
64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=1.4 ms
64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=1.4 ms
I have some question.
(1) gw shows tun interface,
root@freifunk-batman1:~# ifconfig |grep tun
tun0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
root@freifunk-batman1:~#
but nd shows no tun interface.
root@freifunk-batman2:~# ifconfig |grep tun
root@freifunk-batman2:~#
Is this right? Is any setting missed?
(2) From webIF of nd, batman info shows
------------------------------------------------------------------
| Please wait...
| S66batman: Connecting B.A.T.M.A.N. (routings)
Statistics: | S66batman: # batmand -c -b -d 1
| 192.168.2.1, GW: 192.168.2.1(59) via: 192.168.2.1(59)
-------------------------------------------------------------------
| S66batman: Connecting B.A.T.M.A.N. (gateways)
| S66batman: # batmand -c -b -d 2
Gateways: | 192.168.2.1 via: 192.168.2.1(59), gw_class 11 - >6 MBit,
reliability: 9
| No gateways in range ...
--------------------------------------------------------------------
Does the last line "No gateways in range ..." mean failure to find
gateway? If so, why does it happen?
regards,
zukky
Lui wrote:
Hi,
freifunk-batman_0.83.ipk is out now.
hope it's usefull
Lui
5078
days inactive
5162
days old
b.a.t.m.a.n@lists.open-mesh.org
6 comments
6 participants
participants (6)
-
axel -
bh＠udev.org -
BlaXwan -
Felix Bolte -
Lemonde -
Lui