B.A.T.M.A.N April 2024

b.a.t.m.a.n@lists.open-mesh.org

8 participants
7 discussions

[PATCH v2] batman-adv: Add flex array to struct batadv_tvlv_tt_data
by Erick Archer 29 Apr '24

29 Apr '24

The "struct batadv_tvlv_tt_data" uses a dynamically sized set of trailing elements. Specifically, it uses an array of structures of type "batadv_tvlv_tt_vlan_data". So, use the preferred way in the kernel declaring a flexible array [1]. At the same time, prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). In this case, it is important to note that the attribute used is specifically __counted_by_be since variable "num_vlan" is of type __be16. The order in which the structure batadv_tvlv_tt_data and the structure batadv_tvlv_tt_vlan_data are defined must be swap to avoid an incomplete type error. Also, avoid the open-coded arithmetic in memory allocator functions [2] using the "struct_size" macro and use the "flex_array_size" helper to clarify some calculations, when possible. Moreover, the new structure member also allow us to avoid the open-coded arithmetic on pointers in some situations. Take advantage of this. This code was detected with the help of Coccinelle, and audited and modified manually. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-an… [1] Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-ari… [2] Signed-off-by: Erick Archer <erick.archer(a)outlook.com> --- Changes in v2: - Add the #include of <linux/overflow.h> for the "flex_array_size" helper (Sven Eckelmann). - Add the "ntohs" function to the "flex_array_size" helper removed by mistake during the conversion (Sven Eckelmann). - Add the "__counted_by_be" attribute. Previous versions: v1 -> https://lore.kernel.org/linux-hardening/AS8PR02MB7237987BF9DFCA030B330F658B… Hi, In this version I have worked on the "sparse" warnings. The difference in "sparse" warnings before and after this patch is as follows: net/batman-adv/translation-table.c:534:21: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:819:25: warning: expression using sizeof(void) net/batman-adv/translation-table.c:819:25: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:819:25: warning: expression using sizeof(void) net/batman-adv/translation-table.c:819:25: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:819:25: warning: expression using sizeof(void) net/batman-adv/translation-table.c:898:25: warning: expression using sizeof(void) net/batman-adv/translation-table.c:898:25: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:898:25: warning: expression using sizeof(void) net/batman-adv/translation-table.c:898:25: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:898:25: warning: expression using sizeof(void) net/batman-adv/translation-table.c:2892:16: warning: expression using sizeof(void) net/batman-adv/translation-table.c:2892:16: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:2892:16: warning: expression using sizeof(void) net/batman-adv/translation-table.c:2892:16: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:2892:16: warning: expression using sizeof(void) net/batman-adv/translation-table.c:3338:21: warning: expression using sizeof(void) net/batman-adv/translation-table.c:3338:21: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:3338:21: warning: expression using sizeof(void) net/batman-adv/translation-table.c:3338:21: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:3338:21: warning: expression using sizeof(void) net/batman-adv/translation-table.c:3942:30: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:3946:27: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:3950:21: warning: expression using sizeof(void) net/batman-adv/translation-table.c:3986:30: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:3990:27: warning: using sizeof on a flexible structure net/batman-adv/translation-table.c:3992:23: warning: expression using sizeof(void) As far as I know, these warnings cannot be removed. However it can be safely ignored since: Case 1: Warning "using sizeof on a flexible structure" The commit 1a88f2f24619 ("flex-array: warn when using sizeof() on a flexible array") in the sparse git repository says Using sizeof() on a structure containing a flexible array will ignore the 'flexible' part. This is maybe what is expected but maybe not, so add an option -Wflexible-array-sizeof to warn on such usage. In this patch we take care of using or ignoring the flexible part when necessary. Therefore, these warnings can be safely ignored. Case 2: Warning "expression using sizeof(void)" This warning is implied by the use of the "struct_size" helper and "flex_array_size" helper because they both use the "__is_constexpr" macro. And this macro is defined using "sizeof(void)". /* * This returns a constant expression while determining if an argument is * a constant expression, most importantly without evaluating the argument. * Glory to Martin Uecker <Martin.Uecker(a)med.uni-goettingen.de> * * Details: * - sizeof() return an integer constant expression, and does not evaluate * the value of its operand; it only examines the type of its operand. * - The results of comparing two integer constant expressions is also * an integer constant expression. * - The first literal "8" isn't important. It could be any literal value. * - The second literal "8" is to avoid warnings about unaligned pointers; * this could otherwise just be "1". * - (long)(x) is used to avoid warnings about 64-bit types on 32-bit * architectures. * - The C Standard defines "null pointer constant", "(void *)0", as * distinct from other void pointers. * - If (x) is an integer constant expression, then the "* 0l" resolves * it into an integer constant expression of value 0. Since it is cast to * "void *", this makes the second operand a null pointer constant. * - If (x) is not an integer constant expression, then the second operand * resolves to a void pointer (but not a null pointer constant: the value * is not an integer constant 0). * - The conditional operator's third operand, "(int *)8", is an object * pointer (to type "int"). * - The behavior (including the return type) of the conditional operator * ("operand1 ? operand2 : operand3") depends on the kind of expressions * given for the second and third operands. This is the central mechanism * of the macro: * - When one operand is a null pointer constant (i.e. when x is an integer * constant expression) and the other is an object pointer (i.e. our * third operand), the conditional operator returns the type of the * object pointer operand (i.e. "int *"). Here, within the sizeof(), we * would then get: * sizeof(*((int *)(...)) == sizeof(int) == 4 * - When one operand is a void pointer (i.e. when x is not an integer * constant expression) and the other is an object pointer (i.e. our * third operand), the conditional operator returns a "void *" type. * Here, within the sizeof(), we would then get: * sizeof(*((void *)(...)) == sizeof(void) == 1 * - The equality comparison to "sizeof(int)" therefore depends on (x): * sizeof(int) == sizeof(int) (x) was a constant expression * sizeof(int) != sizeof(void) (x) was not a constant expression */ #define __is_constexpr(x) \ (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8))) Therefore, these warnings can also be safely ignored. The Coccinelle script used to detect this code pattern is the following: virtual report @rule1@ type t1; type t2; identifier i0; identifier i1; identifier i2; identifier ALLOC =~ "kmalloc|kzalloc|kmalloc_node|kzalloc_node|vmalloc|vzalloc|kvmalloc|kvzalloc"; position p1; @@ i0 = sizeof(t1) + sizeof(t2) * i1; ... i2 = ALLOC@p1(..., i0, ...); @script:python depends on report@ p1 << rule1.p1; @@ msg = "WARNING: verify allocation on line %s" % (p1[0].line) coccilib.report.print_report(p1[0],msg) Regards, Erick --- include/uapi/linux/batadv_packet.h | 28 +++++++++-------- net/batman-adv/translation-table.c | 49 ++++++++++++------------------ 2 files changed, 35 insertions(+), 42 deletions(-) diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index 6e25753015df..dfbe30536995 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -592,19 +592,6 @@ struct batadv_tvlv_gateway_data { __be32 bandwidth_up; }; -/** - * struct batadv_tvlv_tt_data - tt data propagated through the tt tvlv container - * @flags: translation table flags (see batadv_tt_data_flags) - * @ttvn: translation table version number - * @num_vlan: number of announced VLANs. In the TVLV this struct is followed by - * one batadv_tvlv_tt_vlan_data object per announced vlan - */ -struct batadv_tvlv_tt_data { - __u8 flags; - __u8 ttvn; - __be16 num_vlan; -}; - /** * struct batadv_tvlv_tt_vlan_data - vlan specific tt data propagated through * the tt tvlv container @@ -618,6 +605,21 @@ struct batadv_tvlv_tt_vlan_data { __u16 reserved; }; +/** + * struct batadv_tvlv_tt_data - tt data propagated through the tt tvlv container + * @flags: translation table flags (see batadv_tt_data_flags) + * @ttvn: translation table version number + * @num_vlan: number of announced VLANs. In the TVLV this struct is followed by + * one batadv_tvlv_tt_vlan_data object per announced vlan + * @vlan_data: array of batadv_tvlv_tt_vlan_data objects + */ +struct batadv_tvlv_tt_data { + __u8 flags; + __u8 ttvn; + __be16 num_vlan; + struct batadv_tvlv_tt_vlan_data vlan_data[] __counted_by_be(num_vlan); +}; + /** * struct batadv_tvlv_tt_change - translation table diff data * @flags: status indicators concerning the non-mesh client (see diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index b21ff3c36b07..d66fd900181c 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -28,6 +28,7 @@ #include <linux/net.h> #include <linux/netdevice.h> #include <linux/netlink.h> +#include <linux/overflow.h> #include <linux/rculist.h> #include <linux/rcupdate.h> #include <linux/skbuff.h> @@ -815,8 +816,7 @@ batadv_tt_prepare_tvlv_global_data(struct batadv_orig_node *orig_node, num_entries += atomic_read(&vlan->tt.num_entries); } - change_offset = sizeof(**tt_data); - change_offset += num_vlan * sizeof(*tt_vlan); + change_offset = struct_size(*tt_data, vlan_data, num_vlan); /* if tt_len is negative, allocate the space needed by the full table */ if (*tt_len < 0) @@ -835,7 +835,7 @@ batadv_tt_prepare_tvlv_global_data(struct batadv_orig_node *orig_node, (*tt_data)->ttvn = atomic_read(&orig_node->last_ttvn); (*tt_data)->num_vlan = htons(num_vlan); - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(*tt_data + 1); + tt_vlan = (*tt_data)->vlan_data; hlist_for_each_entry(vlan, &orig_node->vlan_list, list) { tt_vlan->vid = htons(vlan->vid); tt_vlan->crc = htonl(vlan->tt.crc); @@ -895,8 +895,7 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, total_entries += vlan_entries; } - change_offset = sizeof(**tt_data); - change_offset += num_vlan * sizeof(*tt_vlan); + change_offset = struct_size(*tt_data, vlan_data, num_vlan); /* if tt_len is negative, allocate the space needed by the full table */ if (*tt_len < 0) @@ -915,7 +914,7 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, (*tt_data)->ttvn = atomic_read(&bat_priv->tt.vn); (*tt_data)->num_vlan = htons(num_vlan); - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(*tt_data + 1); + tt_vlan = (*tt_data)->vlan_data; hlist_for_each_entry(vlan, &bat_priv->softif_vlan_list, list) { vlan_entries = atomic_read(&vlan->tt.num_entries); if (vlan_entries < 1) @@ -2875,7 +2874,6 @@ static bool batadv_send_tt_request(struct batadv_priv *bat_priv, { struct batadv_tvlv_tt_data *tvlv_tt_data = NULL; struct batadv_tt_req_node *tt_req_node = NULL; - struct batadv_tvlv_tt_vlan_data *tt_vlan_req; struct batadv_hard_iface *primary_if; bool ret = false; int i, size; @@ -2891,7 +2889,7 @@ static bool batadv_send_tt_request(struct batadv_priv *bat_priv, if (!tt_req_node) goto out; - size = sizeof(*tvlv_tt_data) + sizeof(*tt_vlan_req) * num_vlan; + size = struct_size(tvlv_tt_data, vlan_data, num_vlan); tvlv_tt_data = kzalloc(size, GFP_ATOMIC); if (!tvlv_tt_data) goto out; @@ -2903,12 +2901,10 @@ static bool batadv_send_tt_request(struct batadv_priv *bat_priv, /* send all the CRCs within the request. This is needed by intermediate * nodes to ensure they have the correct table before replying */ - tt_vlan_req = (struct batadv_tvlv_tt_vlan_data *)(tvlv_tt_data + 1); for (i = 0; i < num_vlan; i++) { - tt_vlan_req->vid = tt_vlan->vid; - tt_vlan_req->crc = tt_vlan->crc; + tvlv_tt_data->vlan_data[i].vid = tt_vlan->vid; + tvlv_tt_data->vlan_data[i].crc = tt_vlan->crc; - tt_vlan_req++; tt_vlan++; } @@ -2960,7 +2956,6 @@ static bool batadv_send_other_tt_response(struct batadv_priv *bat_priv, struct batadv_orig_node *res_dst_orig_node = NULL; struct batadv_tvlv_tt_change *tt_change; struct batadv_tvlv_tt_data *tvlv_tt_data = NULL; - struct batadv_tvlv_tt_vlan_data *tt_vlan; bool ret = false, full_table; u8 orig_ttvn, req_ttvn; u16 tvlv_len; @@ -2983,10 +2978,9 @@ static bool batadv_send_other_tt_response(struct batadv_priv *bat_priv, orig_ttvn = (u8)atomic_read(&req_dst_orig_node->last_ttvn); req_ttvn = tt_data->ttvn; - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(tt_data + 1); /* this node doesn't have the requested data */ if (orig_ttvn != req_ttvn || - !batadv_tt_global_check_crc(req_dst_orig_node, tt_vlan, + !batadv_tt_global_check_crc(req_dst_orig_node, tt_data->vlan_data, ntohs(tt_data->num_vlan))) goto out; @@ -3329,7 +3323,6 @@ static void batadv_handle_tt_response(struct batadv_priv *bat_priv, struct batadv_orig_node *orig_node = NULL; struct batadv_tvlv_tt_change *tt_change; u8 *tvlv_ptr = (u8 *)tt_data; - u16 change_offset; batadv_dbg(BATADV_DBG_TT, bat_priv, "Received TT_RESPONSE from %pM for ttvn %d t_size: %d [%c]\n", @@ -3342,10 +3335,7 @@ static void batadv_handle_tt_response(struct batadv_priv *bat_priv, spin_lock_bh(&orig_node->tt_lock); - change_offset = sizeof(struct batadv_tvlv_tt_vlan_data); - change_offset *= ntohs(tt_data->num_vlan); - change_offset += sizeof(*tt_data); - tvlv_ptr += change_offset; + tvlv_ptr += struct_size(tt_data, vlan_data, ntohs(tt_data->num_vlan)); tt_change = (struct batadv_tvlv_tt_change *)tvlv_ptr; if (tt_data->flags & BATADV_TT_FULL_TABLE) { @@ -3944,10 +3934,10 @@ static void batadv_tt_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, u8 flags, void *tvlv_value, u16 tvlv_value_len) { - struct batadv_tvlv_tt_vlan_data *tt_vlan; struct batadv_tvlv_tt_change *tt_change; struct batadv_tvlv_tt_data *tt_data; u16 num_entries, num_vlan; + size_t flex_size; if (tvlv_value_len < sizeof(*tt_data)) return; @@ -3957,17 +3947,18 @@ static void batadv_tt_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, num_vlan = ntohs(tt_data->num_vlan); - if (tvlv_value_len < sizeof(*tt_vlan) * num_vlan) + flex_size = flex_array_size(tt_data, vlan_data, num_vlan); + if (tvlv_value_len < flex_size) return; - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(tt_data + 1); - tt_change = (struct batadv_tvlv_tt_change *)(tt_vlan + num_vlan); - tvlv_value_len -= sizeof(*tt_vlan) * num_vlan; + tt_change = (struct batadv_tvlv_tt_change *)(tt_data->vlan_data + + num_vlan); + tvlv_value_len -= flex_size; num_entries = batadv_tt_entries(tvlv_value_len); - batadv_tt_update_orig(bat_priv, orig, tt_vlan, num_vlan, tt_change, - num_entries, tt_data->ttvn); + batadv_tt_update_orig(bat_priv, orig, tt_data->vlan_data, num_vlan, + tt_change, num_entries, tt_data->ttvn); } /** @@ -3998,8 +3989,8 @@ static int batadv_tt_tvlv_unicast_handler_v1(struct batadv_priv *bat_priv, tt_data = tvlv_value; tvlv_value_len -= sizeof(*tt_data); - tt_vlan_len = sizeof(struct batadv_tvlv_tt_vlan_data); - tt_vlan_len *= ntohs(tt_data->num_vlan); + tt_vlan_len = flex_array_size(tt_data, vlan_data, + ntohs(tt_data->num_vlan)); if (tvlv_value_len < tt_vlan_len) return NET_RX_SUCCESS; -- 2.25.1

2 1

Using B.A.T.M.A.N.-Adv and scanning for neighbours
by Furmans Hannes 29 Apr '24

29 Apr '24

Hello everyone! We have a setup with four Raspberry Pi, all in IBSS mode and connected via B.A.T.M.A.N.. That all works fine. However we now have troubles scanning on the Pis for the neighbours. When we run sudo iw wlan0 scan ssid batman-test We have the output: BSS 7e:40:ea:05:57:e9(on wlan0) -- joined last seen: 2433.130s [boottime] TSF: 0 usec (0d, 00:00:00) freq: 2412 beacon interval: 100 TUs capability: IBSS (0x0002) signal: -17.00 dBm last seen: 0 ms ago SSID: batman-test Supported rates: 6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0 DS Parameter set: channel 1 IBSS ATIM window: 0 TUs ERP: Use_Protection HT capabilities: Capabilities: 0x21 RX LDPC HT20 Static SM Power Save RX HT20 SGI No RX STBC Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 4 usec (0x05) HT RX MCS rate indexes supported: 0-7 HT TX MCS rate indexes are undefined HT operation: * primary channel: 1 * secondary channel offset: no secondary * STA channel width: 20 MHz * RIFS: 0 * HT protection: non-HT mixed * non-GF present: 1 * OBSS non-GF present: 1 * dual beacon: 0 * dual CTS protection: 0 * STBC beacon: 0 * L-SIG TXOP Prot: 0 * PCO active: 0 * PCO phase: 0 Overlapping BSS scan params: * passive dwell: 20 TUs * active dwell: 10 TUs * channel width trigger scan interval: 300 s * scan passive total per channel: 200 TUs * scan active total per channel: 20 TUs * BSS width channel transition delay factor: 5 * OBSS Scan Activity Threshold: 0.25 % Extended capabilities: * HT Information Exchange Supported * BSS Transition * Operating Mode Notification WMM: information: 01 00 Which is not what we expected. We hope to see the RSSI of our neighbours and that should be possible, at least as I understand it. We have already tried iwspy (device doesn’t support it), leaving the ibss group (doesn’t help), iwlist (same problem) and the Mac address you see in the output doesn’t match any of the Pis we use. We are stuck here, please help us. Maybe it would be possible to extract that info from batman directly? The devices in questions are all Raspberry Pi 4 Model B, one with 1 GB RAM, two with 2 GB RAM and 1 with 4 GB RAM. We run: batctl debian-2023.0-1 [batman-adv: 2023.3] This is the version of our wifi chip driver (sudo lshw -C network): *-interface:0 description: Wireless interface product: 43430 vendor: Broadcom physical id: 1 bus info: mmc@1:0001:1 logical name: mmc1:0001:1 logical name: wlan0 serial: d8:3a:dd:30:1d:4a capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmfmac driverversion=7.45.234 firmware=01-996384e2 multicast=yes wireless=IEEE 802.11 Thank you for your time Hannes Furmans ETH Zürich

2 1

About Throughput in BATMAN_V
by berkay.demirci＠protonmail.com 15 Apr '24

15 Apr '24

Hello, I have a question about Batman V's behavior about throughput. Batman doesn't seem to calculate throughput properly so we set it manually with throughput override, but then even when actual throughput of the active interface decreases, it doesn't switch to the other interface because it only considers the overriden value. It only switches when the active interface stops receiving OGM's completely. I think if throughput was calculated properly this wouldn't be a problem so i want to ask why it's the way it is. Batman already has a tool called throughout meter, shouldn't it be used to continuously check the value?

3 8

How to cite the BATMAN routing protocol in a research paper?
by Liunian Bian 08 Apr '24

08 Apr '24

Subject: How to cite the BATMAN routing protocol in a research paper? Hi, I cannot find a proper citation for the BATMAN routing protocol. The citations I could find were: > A. Neumann, C. Aichele, M. Lindner, and S. Wunderlich, “Better approach to mobile ad-hoc networking (B.A.T.M.A.N.)," IETF Draft, 2008 [Online] > R. Sanchez-Iborra, M. -D. Cano and J. Garcia-Haro, "Performance Evaluation of BATMAN Routing Protocol for VoIP Services: A QoE Perspective," in IEEE Transactions on Wireless Communications, Sept. 2014 which are incomplete and outdated. Is there any references I can use for citing BATMAN IV or BATMAN V in a research paper? It would help me a lot. Best regards, Liunian Bian Email: bianliunian18s(a)ict.ac.cn

2 1

[PATCH] batman-adv: Add flex array to struct batadv_tvlv_tt_data
by Erick Archer 06 Apr '24

06 Apr '24

The "struct batadv_tvlv_tt_data" uses a dynamically sized set of trailing elements. Specifically, it uses an array of structures of type "batadv_tvlv_tt_vlan_data". So, use the preferred way in the kernel declaring a flexible array [1]. The order in which the structure batadv_tvlv_tt_data and the structure batadv_tvlv_tt_vlan_data are defined must be swap to avoid an incomplete type error. Also, avoid the open-coded arithmetic in memory allocator functions [2] using the "struct_size" macro and use the "flex_array_size" helper to clarify some calculations, when possible. Moreover, the new structure member also allow us to avoid the open-coded arithmetic on pointers in some situations. Take advantage of this. This code was detected with the help of Coccinelle, and audited and modified manually. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-an… [1] Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-ari… [2] Signed-off-by: Erick Archer <erick.archer(a)outlook.com> --- Hi, I would like to add the "__counted_by(num_vlan)" tag to the new flex member but I don't know if this line can affect it. ntohs(tt_data->num_vlan) If there is no problem I can send a v2 with the "__counted_by" tag. The Coccinelle script used to detect this code pattern is the following: virtual report @rule1@ type t1; type t2; identifier i0; identifier i1; identifier i2; identifier ALLOC =~ "kmalloc|kzalloc|kmalloc_node|kzalloc_node|vmalloc|vzalloc|kvmalloc|kvzalloc"; position p1; @@ i0 = sizeof(t1) + sizeof(t2) * i1; ... i2 = ALLOC@p1(..., i0, ...); @script:python depends on report@ p1 << rule1.p1; @@ msg = "WARNING: verify allocation on line %s" % (p1[0].line) coccilib.report.print_report(p1[0],msg) Regards, Erick --- include/uapi/linux/batadv_packet.h | 28 +++++++++--------- net/batman-adv/translation-table.c | 47 ++++++++++++------------------ 2 files changed, 33 insertions(+), 42 deletions(-) diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index 6e25753015df..49cd345b84a7 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -592,19 +592,6 @@ struct batadv_tvlv_gateway_data { __be32 bandwidth_up; }; -/** - * struct batadv_tvlv_tt_data - tt data propagated through the tt tvlv container - * @flags: translation table flags (see batadv_tt_data_flags) - * @ttvn: translation table version number - * @num_vlan: number of announced VLANs. In the TVLV this struct is followed by - * one batadv_tvlv_tt_vlan_data object per announced vlan - */ -struct batadv_tvlv_tt_data { - __u8 flags; - __u8 ttvn; - __be16 num_vlan; -}; - /** * struct batadv_tvlv_tt_vlan_data - vlan specific tt data propagated through * the tt tvlv container @@ -618,6 +605,21 @@ struct batadv_tvlv_tt_vlan_data { __u16 reserved; }; +/** + * struct batadv_tvlv_tt_data - tt data propagated through the tt tvlv container + * @flags: translation table flags (see batadv_tt_data_flags) + * @ttvn: translation table version number + * @num_vlan: number of announced VLANs. In the TVLV this struct is followed by + * one batadv_tvlv_tt_vlan_data object per announced vlan + * @vlan_data: array of batadv_tvlv_tt_vlan_data objects + */ +struct batadv_tvlv_tt_data { + __u8 flags; + __u8 ttvn; + __be16 num_vlan; + struct batadv_tvlv_tt_vlan_data vlan_data[]; +}; + /** * struct batadv_tvlv_tt_change - translation table diff data * @flags: status indicators concerning the non-mesh client (see diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index b95c36765d04..96d22d8209f4 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -856,8 +856,7 @@ batadv_tt_prepare_tvlv_global_data(struct batadv_orig_node *orig_node, num_entries += atomic_read(&vlan->tt.num_entries); } - change_offset = sizeof(**tt_data); - change_offset += num_vlan * sizeof(*tt_vlan); + change_offset = struct_size(*tt_data, vlan_data, num_vlan); /* if tt_len is negative, allocate the space needed by the full table */ if (*tt_len < 0) @@ -876,7 +875,7 @@ batadv_tt_prepare_tvlv_global_data(struct batadv_orig_node *orig_node, (*tt_data)->ttvn = atomic_read(&orig_node->last_ttvn); (*tt_data)->num_vlan = htons(num_vlan); - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(*tt_data + 1); + tt_vlan = (*tt_data)->vlan_data; hlist_for_each_entry(vlan, &orig_node->vlan_list, list) { tt_vlan->vid = htons(vlan->vid); tt_vlan->crc = htonl(vlan->tt.crc); @@ -936,8 +935,7 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, total_entries += vlan_entries; } - change_offset = sizeof(**tt_data); - change_offset += num_vlan * sizeof(*tt_vlan); + change_offset = struct_size(*tt_data, vlan_data, num_vlan); /* if tt_len is negative, allocate the space needed by the full table */ if (*tt_len < 0) @@ -956,7 +954,7 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, (*tt_data)->ttvn = atomic_read(&bat_priv->tt.vn); (*tt_data)->num_vlan = htons(num_vlan); - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(*tt_data + 1); + tt_vlan = (*tt_data)->vlan_data; hlist_for_each_entry(vlan, &bat_priv->softif_vlan_list, list) { vlan_entries = atomic_read(&vlan->tt.num_entries); if (vlan_entries < 1) @@ -2916,7 +2914,6 @@ static bool batadv_send_tt_request(struct batadv_priv *bat_priv, { struct batadv_tvlv_tt_data *tvlv_tt_data = NULL; struct batadv_tt_req_node *tt_req_node = NULL; - struct batadv_tvlv_tt_vlan_data *tt_vlan_req; struct batadv_hard_iface *primary_if; bool ret = false; int i, size; @@ -2932,7 +2929,7 @@ static bool batadv_send_tt_request(struct batadv_priv *bat_priv, if (!tt_req_node) goto out; - size = sizeof(*tvlv_tt_data) + sizeof(*tt_vlan_req) * num_vlan; + size = struct_size(tvlv_tt_data, vlan_data, num_vlan); tvlv_tt_data = kzalloc(size, GFP_ATOMIC); if (!tvlv_tt_data) goto out; @@ -2944,12 +2941,10 @@ static bool batadv_send_tt_request(struct batadv_priv *bat_priv, /* send all the CRCs within the request. This is needed by intermediate * nodes to ensure they have the correct table before replying */ - tt_vlan_req = (struct batadv_tvlv_tt_vlan_data *)(tvlv_tt_data + 1); for (i = 0; i < num_vlan; i++) { - tt_vlan_req->vid = tt_vlan->vid; - tt_vlan_req->crc = tt_vlan->crc; + tvlv_tt_data->vlan_data[i].vid = tt_vlan->vid; + tvlv_tt_data->vlan_data[i].crc = tt_vlan->crc; - tt_vlan_req++; tt_vlan++; } @@ -3001,7 +2996,6 @@ static bool batadv_send_other_tt_response(struct batadv_priv *bat_priv, struct batadv_orig_node *res_dst_orig_node = NULL; struct batadv_tvlv_tt_change *tt_change; struct batadv_tvlv_tt_data *tvlv_tt_data = NULL; - struct batadv_tvlv_tt_vlan_data *tt_vlan; bool ret = false, full_table; u8 orig_ttvn, req_ttvn; u16 tvlv_len; @@ -3024,10 +3018,9 @@ static bool batadv_send_other_tt_response(struct batadv_priv *bat_priv, orig_ttvn = (u8)atomic_read(&req_dst_orig_node->last_ttvn); req_ttvn = tt_data->ttvn; - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(tt_data + 1); /* this node doesn't have the requested data */ if (orig_ttvn != req_ttvn || - !batadv_tt_global_check_crc(req_dst_orig_node, tt_vlan, + !batadv_tt_global_check_crc(req_dst_orig_node, tt_data->vlan_data, ntohs(tt_data->num_vlan))) goto out; @@ -3370,7 +3363,6 @@ static void batadv_handle_tt_response(struct batadv_priv *bat_priv, struct batadv_orig_node *orig_node = NULL; struct batadv_tvlv_tt_change *tt_change; u8 *tvlv_ptr = (u8 *)tt_data; - u16 change_offset; batadv_dbg(BATADV_DBG_TT, bat_priv, "Received TT_RESPONSE from %pM for ttvn %d t_size: %d [%c]\n", @@ -3383,10 +3375,7 @@ static void batadv_handle_tt_response(struct batadv_priv *bat_priv, spin_lock_bh(&orig_node->tt_lock); - change_offset = sizeof(struct batadv_tvlv_tt_vlan_data); - change_offset *= ntohs(tt_data->num_vlan); - change_offset += sizeof(*tt_data); - tvlv_ptr += change_offset; + tvlv_ptr += struct_size(tt_data, vlan_data, ntohs(tt_data->num_vlan)); tt_change = (struct batadv_tvlv_tt_change *)tvlv_ptr; if (tt_data->flags & BATADV_TT_FULL_TABLE) { @@ -3985,10 +3974,10 @@ static void batadv_tt_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, u8 flags, void *tvlv_value, u16 tvlv_value_len) { - struct batadv_tvlv_tt_vlan_data *tt_vlan; struct batadv_tvlv_tt_change *tt_change; struct batadv_tvlv_tt_data *tt_data; u16 num_entries, num_vlan; + size_t flex_size; if (tvlv_value_len < sizeof(*tt_data)) return; @@ -3998,17 +3987,18 @@ static void batadv_tt_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, num_vlan = ntohs(tt_data->num_vlan); - if (tvlv_value_len < sizeof(*tt_vlan) * num_vlan) + flex_size = flex_array_size(tt_data, vlan_data, num_vlan); + if (tvlv_value_len < flex_size) return; - tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(tt_data + 1); - tt_change = (struct batadv_tvlv_tt_change *)(tt_vlan + num_vlan); - tvlv_value_len -= sizeof(*tt_vlan) * num_vlan; + tt_change = (struct batadv_tvlv_tt_change *)(tt_data->vlan_data + + num_vlan); + tvlv_value_len -= flex_size; num_entries = batadv_tt_entries(tvlv_value_len); - batadv_tt_update_orig(bat_priv, orig, tt_vlan, num_vlan, tt_change, - num_entries, tt_data->ttvn); + batadv_tt_update_orig(bat_priv, orig, tt_data->vlan_data, num_vlan, + tt_change, num_entries, tt_data->ttvn); } /** @@ -4039,8 +4029,7 @@ static int batadv_tt_tvlv_unicast_handler_v1(struct batadv_priv *bat_priv, tt_data = tvlv_value; tvlv_value_len -= sizeof(*tt_data); - tt_vlan_len = sizeof(struct batadv_tvlv_tt_vlan_data); - tt_vlan_len *= ntohs(tt_data->num_vlan); + tt_vlan_len = flex_array_size(tt_data, vlan_data, tt_data->num_vlan); if (tvlv_value_len < tt_vlan_len) return NET_RX_SUCCESS; -- 2.25.1

2 2

[PATCH 0/3] pull request for net-next: batman-adv 2024-04-05
by Simon Wunderlich 05 Apr '24

05 Apr '24

Hi Jakub, hi David, here is a cleanup pull request of batman-adv to go into net-next. Please pull or let me know of any problem! Thank you, Simon The following changes since commit 4cece764965020c22cff7665b18a012006359095: Linux 6.9-rc1 (2024-03-24 14:10:05 -0700) are available in the Git repository at: git://git.open-mesh.org/linux-merge.git tags/batadv-next-pullrequest-20240405 for you to fetch changes up to 40dc8ab605894acae1473e434944924a22cfaaa0: batman-adv: bypass empty buckets in batadv_purge_orig_ref() (2024-03-31 10:13:36 +0200) ---------------------------------------------------------------- This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - prefer kfree_rcu() over call_rcu() with free-only callbacks, by Dmitry Antipov - bypass empty buckets in batadv_purge_orig_ref(), by Eric Dumazet ---------------------------------------------------------------- Dmitry Antipov (1): batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks Eric Dumazet (1): batman-adv: bypass empty buckets in batadv_purge_orig_ref() Simon Wunderlich (1): batman-adv: Start new development cycle net/batman-adv/main.h | 2 +- net/batman-adv/originator.c | 2 ++ net/batman-adv/translation-table.c | 47 +++----------------------------------- 3 files changed, 6 insertions(+), 45 deletions(-)

1 3

[PATCH 0/1] pull request for net: batman-adv 2024-04-05
by Simon Wunderlich 05 Apr '24

05 Apr '24

Hi David, hi Jakub, here is a bugfix for batman-adv which we would like to have integrated into net. Please pull or let me know of any problem! Thank you, Simon The following changes since commit 4cece764965020c22cff7665b18a012006359095: Linux 6.9-rc1 (2024-03-24 14:10:05 -0700) are available in the Git repository at: git://git.open-mesh.org/linux-merge.git tags/batadv-net-pullrequest-20240405 for you to fetch changes up to b1f532a3b1e6d2e5559c7ace49322922637a28aa: batman-adv: Avoid infinite loop trying to resize local TT (2024-03-29 20:18:43 +0100) ---------------------------------------------------------------- Here is a batman-adv bugfix: - void infinite loop trying to resize local TT, by Sven Eckelmann ---------------------------------------------------------------- Sven Eckelmann (1): batman-adv: Avoid infinite loop trying to resize local TT net/batman-adv/translation-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

1 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

B.A.T.M.A.N April 2024