[B.A.T.M.A.N.] [PATCH] batman-adv: handle race condition for claims also in batadv_bla_rx
by Simon Wunderlich
From: Andreas Pape <apape(a)phoenixcontact.com>
Like in the case of the patch for batadv_bla_tx to handle a race
condition when claiming a mac address for bla, a similar situation
can occur when claiming is triggered via batadv_bla_rx. This patch
solves this with a similar approach as for batadv_bla_tx.
Signed-off-by: Andreas Pape <apape(a)phoenixcontact.com>
---
net/batman-adv/bridge_loop_avoidance.c | 31 ++++++++++++++++++++-----------
net/batman-adv/translation-table.c | 26 ++++++++++++++++++++++++++
net/batman-adv/translation-table.h | 3 +++
3 files changed, 49 insertions(+), 11 deletions(-)
diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index d07e89e..cab8980 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1847,19 +1847,28 @@ bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb,
if (!claim) {
/* possible optimization: race for a claim */
- /* No claim exists yet, claim it for us!
+ /* Make sure this packet is not looping back
+ * from our own backbone.
*/
- batadv_dbg(BATADV_DBG_BLA, bat_priv,
- "bla_rx(): Unclaimed MAC %pM found. Claim it. Local: %s\n",
- ethhdr->h_source,
- batadv_is_my_client(bat_priv,
- ethhdr->h_source, vid) ?
- "yes" : "no");
- batadv_handle_claim(bat_priv, primary_if,
- primary_if->net_dev->dev_addr,
- ethhdr->h_source, vid);
- goto allow;
+ if (batadv_tt_local_has_timed_out(bat_priv, ethhdr->h_source,
+ vid, 100)) {
+ /* No claim exists yet, claim it for us!
+ */
+ batadv_dbg(BATADV_DBG_BLA, bat_priv,
+ "bla_rx(): Unclaimed MAC %pM found. Claim it. Local: %s\n",
+ ethhdr->h_source,
+ batadv_is_my_client(bat_priv,
+ ethhdr->h_source, vid) ?
+ "yes" : "no");
+
+ batadv_handle_claim(bat_priv, primary_if,
+ primary_if->net_dev->dev_addr,
+ ethhdr->h_source, vid);
+ goto allow;
+ } else {
+ goto handled;
+ }
}
/* if it is our own claim ... */
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index e75b493..b908195 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -4380,3 +4380,29 @@ void batadv_tt_cache_destroy(void)
kmem_cache_destroy(batadv_tt_req_cache);
kmem_cache_destroy(batadv_tt_roam_cache);
}
+
+bool batadv_tt_local_has_timed_out(struct batadv_priv *bat_priv,
+ const u8 *addr, unsigned short vid,
+ unsigned int timeout)
+{
+ struct batadv_tt_local_entry *tt_local_entry;
+ bool ret = true;
+
+ tt_local_entry = batadv_tt_local_hash_find(bat_priv, addr, vid);
+ if (!tt_local_entry)
+ goto out;
+ /* Check if the client has been logically deleted (but is kept for
+ * consistency purpose)
+ */
+ if ((tt_local_entry->common.flags & BATADV_TT_CLIENT_PENDING) ||
+ (tt_local_entry->common.flags & BATADV_TT_CLIENT_ROAM))
+ goto out;
+ /* Check that the tt_local_entry has a certain age */
+ if (!batadv_has_timed_out(tt_local_entry->last_seen, timeout))
+ ret = false;
+
+out:
+ if (tt_local_entry)
+ batadv_tt_local_entry_put(tt_local_entry);
+ return ret;
+}
diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h
index 411d586..b05d0d8 100644
--- a/net/batman-adv/translation-table.h
+++ b/net/batman-adv/translation-table.h
@@ -65,5 +65,8 @@ bool batadv_tt_global_is_isolated(struct batadv_priv *bat_priv,
int batadv_tt_cache_init(void);
void batadv_tt_cache_destroy(void);
+bool batadv_tt_local_has_timed_out(struct batadv_priv *bat_priv,
+ const u8 *addr, unsigned short vid,
+ unsigned int timeout);
#endif /* _NET_BATMAN_ADV_TRANSLATION_TABLE_H_ */
--
1.7.0.4
2 years, 10 months
[B.A.T.M.A.N.] [PATCH 00/17] pull request for net-next: batman-adv 2016-10-27
by Simon Wunderlich
Hi David,
this is our first feature pull request for batman-adv (mostly containing
code cleanup stuff), there are at least two more to come.
Please pull or let me know of any problem!
Thank you,
Simon
The following changes since commit 29fbff8698fc0ac1a1d74584b258e0bf18b469f9:
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net (2016-10-13 21:40:23 -0700)
are available in the git repository at:
git://git.open-mesh.org/linux-merge.git tags/batadv-next-for-davem-20161027
for you to fetch changes up to 4c7da0f6dbcde2431d773ce03cde5e7abede54e0:
batman-adv: Avoid precedence issues in macros (2016-10-19 08:37:54 +0200)
----------------------------------------------------------------
This code cleanup patchset includes the following changes (chronological
order):
- bump version strings, by Simon Wunderlich
- README updates/clean up, by Sven Eckelmann (4 patches)
- Code clean up and restructuring by Sven Eckelmann (2 patches)
- Kerneldoc fix in forw_packet structure, by Linus Luessing
- Remove unused argument in dbg_arp, by Antonio Quartulli
- Add support to build batman-adv without wireless, by Linus Luessing
- Restructure error handling for is_ap_isolated, by Markus Elfring
- Remove unused initialization in various functions, by Sven Eckelmann
- Use better names for fragment and gateway list heads, by Sven
Eckelmann (2 patches)
- Convert to octal permissions for files, by Sven Eckelmann
- Avoid precedence issues for some macros, by Sven Eckelmann
----------------------------------------------------------------
Antonio Quartulli (1):
batman-adv: remove unsed argument from batadv_dbg_arp() function
Linus Lüssing (2):
batman-adv: fix batadv_forw_packet kerneldoc for list attribute
batman-adv: Allow selecting BATMAN V if CFG80211 is not built
Markus Elfring (1):
batman-adv: Less function calls in batadv_is_ap_isolated() after error detection
Simon Wunderlich (1):
batman-adv: Start new development cycle
Sven Eckelmann (12):
batman-adv: Add B.A.T.M.A.N. V sysfs files to README
batman-adv: Add network_coding and mcast sysfs files to README
batman-adv: Add dat, mcast, nc and neighbor debugfs files to README
batman-adv: Document new nc, mcast and tpmeter log levels
batman-adv: Remove unused function batadv_hash_delete
batman-adv: Move batadv_sum_counter to soft-interface.c
batman-adv: Remove unused batadv_icmp_user_cmd_type
batman-adv: Remove needless init of variables on stack
batman-adv: Use proper name for fragments list head
batman-adv: Use proper name for gateway list head
batman-adv: Use octal permissions instead of macros
batman-adv: Avoid precedence issues in macros
Documentation/networking/batman-adv.txt | 35 ++++++++++++----------
net/batman-adv/Kconfig | 2 +-
net/batman-adv/bat_iv_ogm.c | 6 ++--
net/batman-adv/bat_v.c | 8 ++---
net/batman-adv/bat_v_ogm.c | 4 +--
net/batman-adv/debugfs.c | 26 ++++++++--------
net/batman-adv/distributed-arp-table.c | 17 ++++-------
net/batman-adv/fragmentation.c | 18 +++++------
net/batman-adv/fragmentation.h | 2 +-
net/batman-adv/gateway_client.c | 9 +++---
net/batman-adv/hash.h | 30 -------------------
net/batman-adv/icmp_socket.c | 5 ++--
net/batman-adv/log.c | 4 +--
net/batman-adv/log.h | 12 ++++----
net/batman-adv/main.c | 2 +-
net/batman-adv/main.h | 27 ++---------------
net/batman-adv/network-coding.c | 8 ++---
net/batman-adv/originator.c | 10 +++----
net/batman-adv/packet.h | 12 +-------
net/batman-adv/send.c | 2 +-
net/batman-adv/soft-interface.c | 21 +++++++++++++
net/batman-adv/sysfs.c | 53 ++++++++++++++-------------------
net/batman-adv/translation-table.c | 25 +++++++---------
net/batman-adv/types.h | 16 +++++-----
24 files changed, 149 insertions(+), 205 deletions(-)
3 years, 9 months
Re: [B.A.T.M.A.N.] limit of if per batman
by Sven Eckelmann
On Mittwoch, 25. Januar 2017 03:18:10 CET jens wrote:
> On 24.01.2017 14:39, Sven Eckelmann wrote:
> > There is no artificial limit added by batman-adv. But transmitting a lot of
> > broadcasts over 255 virtual links sharing the same physical link
> > might get interesting (independent of batman-adv).
>
> this made me curious , and i modified your script a bit - turns out
> after the 127. IF you add to batman-adv you get an Error -
> all 510 gretap links was succesfully build ...
> # ifconfig |grep gre| wc -l
> 515
> # batctl if|sort|wc -l
> 127
> the error is mainly
> *Error - can't write to file
> '/sys/class/net/gre128/batman_adv/mesh_iface': Cannot allocate memory
[...]
> [113990.684947] [<ffffffff8107c16e>] ? __warn+0xbe/0xe0 [113990.684955]
> [<ffffffffc017a804>] ? batadv_orig_hash_add_if+0x94/0x140 [batman_adv]
> [113990.684961] [<ffffffff811a7b10>] ? kmalloc_slab+0x90/0xa0
> [113990.684966] [<ffffffff811e08c5>] ? __kmalloc+0x25/0x580
> [113990.684971] [<ffffffff815ef9d7>] ? _raw_spin_lock_irqsave+0x17/0x39
> [113990.684977] [<ffffffff81432c11>] ? _crng_backtrack_protect+0x31/0x70
> [113990.684981] [<ffffffff811e0ebc>] ? kmem_cache_alloc_trace+0x9c/0x540
> [113990.684986] [<ffffffff814340b7>] ? get_random_bytes+0xe7/0x1c0
> [113990.684991] [<ffffffffc017a804>] ?
[...]
I would guess that your system mostly fails becauseit cannot handle the
allocation of the "large" arrays which store:
* @bcast_own: set of bitfields (one per hard-interface) where each one counts
* the number of our OGMs this orig_node rebroadcasted "back" to us (relative
* to last_real_seqno). Every bitfield is BATADV_TQ_LOCAL_WINDOW_SIZE bits long.
* @bcast_own_sum: sum of bcast_own
Kind regards,
Sven
4 years, 3 months
Re: [B.A.T.M.A.N.] Manually Updating Translation table
by Linus Lüssing
Hi Kartik,
On Wed, Oct 25, 2017 at 02:46:32PM +0200, Kartikeswar Koppula wrote:
> I checked the routes manually and it looks okay.
Could you share those? Next to "ip route show" the following tables
would be interesting, too:
$ ip address show
$ brctl show
$ batctl tg
$ batctl o
$ batctl n
Regards, Linus
4 years, 6 months
[B.A.T.M.A.N.] [PATCH 0/3] pull request for net-next: batman-adv 2017-10-23
by Simon Wunderlich
Hi David,
here is another small documentation/cleanup pull request of batman-adv to go
into net-next.
Please pull or let me know of any problem!
Thank you,
Simon
The following changes since commit 4bc4e64c2cfdafa6b8ecdcc5edf10cc1a147587f:
Merge tag 'batadv-next-for-davem-20171006' of git://git.open-mesh.org/linux-merge (2017-10-06 10:12:52 -0700)
are available in the git repository at:
git://git.open-mesh.org/linux-merge.git tags/batadv-next-for-davem-20171023
for you to fetch changes up to 40b16b9be5773a314948656c96adf7bf7cfdbd0b:
batman-adv: use inline kernel-doc for uapi constants (2017-10-23 14:22:25 +0200)
----------------------------------------------------------------
This documentation/cleanup patchset includes the following patches:
- Fix parameter kerneldoc which caused kerneldoc warnings, by Sven Eckelmann
- Remove spurious warnings in B.A.T.M.A.N. V neighbor comparison,
by Sven Eckelmann
- Use inline kernel-doc style for UAPI constants, by Sven Eckelmann
----------------------------------------------------------------
Sven Eckelmann (3):
batman-adv: Add missing kerneldoc for extack
batman-adv: Avoid spurious warnings from bat_v neigh_cmp implementation
batman-adv: use inline kernel-doc for uapi constants
include/uapi/linux/batman_adv.h | 369 +++++++++++++++++++++++++++++++---------
net/batman-adv/bat_v.c | 9 +-
net/batman-adv/soft-interface.c | 1 +
3 files changed, 295 insertions(+), 84 deletions(-)
4 years, 6 months
[B.A.T.M.A.N.] [PATCH] batman-adv: Deinline batadv_orig_hash_find, save 9024 bytes
by Denys Vlasenko
This function compiles to 473 bytes of machine code.
21 callsites.
text data bss dec hex filename
95903266 20860288 35991552 152755106 91adba2 vmlinux_before
95894242 20860288 35991552 152746082 91ab862 vmlinux
Signed-off-by: Denys Vlasenko <dvlasenk(a)redhat.com>
CC: Marek Lindner <mareklindner(a)neomailbox.ch>
CC: Simon Wunderlich <sw(a)simonwunderlich.de>
CC: Antonio Quartulli <a(a)unstable.cc>
CC: Sven Eckelmann <sven(a)narfation.org>
CC: b.a.t.m.a.n(a)lists.open-mesh.org
CC: linux-kernel(a)vger.kernel.org
---
net/batman-adv/originator.c | 29 +++++++++++++++++++++++++++++
net/batman-adv/originator.h | 31 ++-----------------------------
2 files changed, 31 insertions(+), 29 deletions(-)
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index e4cbb07..bcf78f1 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -47,6 +47,36 @@
/* hash class keys */
static struct lock_class_key batadv_orig_hash_lock_class_key;
+struct batadv_orig_node *
+batadv_orig_hash_find(struct batadv_priv *bat_priv, const void *data)
+{
+ struct batadv_hashtable *hash = bat_priv->orig_hash;
+ struct hlist_head *head;
+ struct batadv_orig_node *orig_node, *orig_node_tmp = NULL;
+ int index;
+
+ if (!hash)
+ return NULL;
+
+ index = batadv_choose_orig(data, hash->size);
+ head = &hash->table[index];
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
+ if (!batadv_compare_eth(orig_node, data))
+ continue;
+
+ if (!kref_get_unless_zero(&orig_node->refcount))
+ continue;
+
+ orig_node_tmp = orig_node;
+ break;
+ }
+ rcu_read_unlock();
+
+ return orig_node_tmp;
+}
+
static void batadv_purge_orig(struct work_struct *work);
/**
diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h
index 4e8b67f..db7a87d 100644
--- a/net/batman-adv/originator.h
+++ b/net/batman-adv/originator.h
@@ -96,34 +96,7 @@ static inline u32 batadv_choose_orig(const void *data, u32 size)
return hash % size;
}
-static inline struct batadv_orig_node *
-batadv_orig_hash_find(struct batadv_priv *bat_priv, const void *data)
-{
- struct batadv_hashtable *hash = bat_priv->orig_hash;
- struct hlist_head *head;
- struct batadv_orig_node *orig_node, *orig_node_tmp = NULL;
- int index;
-
- if (!hash)
- return NULL;
-
- index = batadv_choose_orig(data, hash->size);
- head = &hash->table[index];
-
- rcu_read_lock();
- hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
- if (!batadv_compare_eth(orig_node, data))
- continue;
-
- if (!kref_get_unless_zero(&orig_node->refcount))
- continue;
-
- orig_node_tmp = orig_node;
- break;
- }
- rcu_read_unlock();
-
- return orig_node_tmp;
-}
+struct batadv_orig_node *
+batadv_orig_hash_find(struct batadv_priv *bat_priv, const void *data);
#endif /* _NET_BATMAN_ADV_ORIGINATOR_H_ */
--
1.8.1.4
4 years, 6 months
[B.A.T.M.A.N.] [PATCH 1/2] alfred: Only query debugfs when netlink failed
by Sven Eckelmann
It is enough to just request the data from netlink and skip debugfs when
netlink didn't return an error. The overwrite of the ret variable was only
for testing purposes and should no longer be used.
Fixes: a7bc3d9a2b3f ("alfred: Cache the global translation table entries")
Signed-off-by: Sven Eckelmann <sven(a)narfation.org>
---
batadv_query.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/batadv_query.c b/batadv_query.c
index 8580f1b..78b92cd 100644
--- a/batadv_query.c
+++ b/batadv_query.c
@@ -308,7 +308,6 @@ struct hashtable_t *tg_hash_new(const char *mesh_iface)
ret = translate_mac_netlink(mesh_iface, tg_hash);
enable_net_admin_capability(0);
- ret = -EOPNOTSUPP;
if (ret == -EOPNOTSUPP)
translate_mac_debugfs(mesh_iface, tg_hash);
@@ -477,7 +476,6 @@ struct hashtable_t *orig_hash_new(const char *mesh_iface)
ret = get_tq_netlink(mesh_iface, orig_hash);
enable_net_admin_capability(0);
- ret = -EOPNOTSUPP;
if (ret == -EOPNOTSUPP)
get_tq_debugfs(mesh_iface, orig_hash);
--
2.11.0
4 years, 6 months
[B.A.T.M.A.N.] [PATCH] batman-adv: use inline kernel-doc for uapi constants
by Sven Eckelmann
The enums of constants for netlink tends to become rather large over time.
Documenting them is easier when the kernel-doc is actually next to constant
and not in a different block above the enum.
Also inline kernel-doc allows multi-paragraph description. This could be
required to better document the netlink command types and the expected
return values.
Signed-off-by: Sven Eckelmann <sven(a)narfation.org>
---
check for example include/uapi/linux/nl80211.h for some documentation which
starts to become really massive.
include/uapi/linux/batman_adv.h | 369 +++++++++++++++++++++++++++++++---------
1 file changed, 290 insertions(+), 79 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a83ddb7b..efd641c8 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -24,20 +24,6 @@
/**
* enum batadv_tt_client_flags - TT client specific flags
- * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
- * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new
- * update telling its new real location has not been received/sent yet
- * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface.
- * This information is used by the "AP Isolation" feature
- * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
- * information is used by the Extended Isolation feature
- * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table
- * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has
- * not been announced yet
- * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept
- * in the table for one more originator interval for consistency purposes
- * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of
- * the network but no nnode has already announced it
*
* Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
* Bits from 8 to 15 are called _local flags_ because they are used for local
@@ -48,160 +34,385 @@
* in the TT CRC computation.
*/
enum batadv_tt_client_flags {
+ /**
+ * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
+ */
BATADV_TT_CLIENT_DEL = (1 << 0),
+
+ /**
+ * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and
+ * the new update telling its new real location has not been
+ * received/sent yet
+ */
BATADV_TT_CLIENT_ROAM = (1 << 1),
+
+ /**
+ * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi
+ * interface. This information is used by the "AP Isolation" feature
+ */
BATADV_TT_CLIENT_WIFI = (1 << 4),
+
+ /**
+ * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
+ * information is used by the Extended Isolation feature
+ */
BATADV_TT_CLIENT_ISOLA = (1 << 5),
+
+ /**
+ * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from
+ * the table
+ */
BATADV_TT_CLIENT_NOPURGE = (1 << 8),
+
+ /**
+ * @BATADV_TT_CLIENT_NEW: this client has been added to the local table
+ * but has not been announced yet
+ */
BATADV_TT_CLIENT_NEW = (1 << 9),
+
+ /**
+ * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it
+ * is kept in the table for one more originator interval for consistency
+ * purposes
+ */
BATADV_TT_CLIENT_PENDING = (1 << 10),
+
+ /**
+ * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
+ * part of the network but no nnode has already announced it
+ */
BATADV_TT_CLIENT_TEMP = (1 << 11),
};
/**
* enum batadv_nl_attrs - batman-adv netlink attributes
- *
- * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
- * @BATADV_ATTR_VERSION: batman-adv version string
- * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
- * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
- * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
- * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
- * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
- * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
- * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface
- * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
- * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status)
- * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
- * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
- * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
- * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
- * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
- * @BATADV_ATTR_TT_ADDRESS: Client MAC address
- * @BATADV_ATTR_TT_TTVN: Translation table version
- * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
- * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
- * @BATADV_ATTR_TT_VID: VLAN ID
- * @BATADV_ATTR_TT_FLAGS: Translation table client flags
- * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
- * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
- * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
- * @BATADV_ATTR_TQ: TQ to neighbour
- * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
- * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
- * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
- * @BATADV_ATTR_ROUTER: Gateway router MAC address
- * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
- * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
- * @BATADV_ATTR_BLA_VID: BLA VLAN ID
- * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
- * @BATADV_ATTR_BLA_CRC: BLA CRC
- * @__BATADV_ATTR_AFTER_LAST: internal use
- * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
- * @BATADV_ATTR_MAX: highest attribute number currently defined
*/
enum batadv_nl_attrs {
+ /**
+ * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
+ */
BATADV_ATTR_UNSPEC,
+
+ /**
+ * @BATADV_ATTR_VERSION: batman-adv version string
+ */
BATADV_ATTR_VERSION,
+
+ /**
+ * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
+ */
BATADV_ATTR_ALGO_NAME,
+
+ /**
+ * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
+ */
BATADV_ATTR_MESH_IFINDEX,
+
+ /**
+ * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
+ */
BATADV_ATTR_MESH_IFNAME,
+
+ /**
+ * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
+ */
BATADV_ATTR_MESH_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
+ */
BATADV_ATTR_HARD_IFINDEX,
+
+ /**
+ * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
+ */
BATADV_ATTR_HARD_IFNAME,
+
+ /**
+ * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv
+ * interface
+ */
BATADV_ATTR_HARD_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
+ */
BATADV_ATTR_ORIG_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TPMETER_RESULT: result of run (see
+ * batadv_tp_meter_status)
+ */
BATADV_ATTR_TPMETER_RESULT,
+
+ /**
+ * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
+ */
BATADV_ATTR_TPMETER_TEST_TIME,
+
+ /**
+ * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
+ */
BATADV_ATTR_TPMETER_BYTES,
+
+ /**
+ * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
+ */
BATADV_ATTR_TPMETER_COOKIE,
+
+ /**
+ * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
+ */
BATADV_ATTR_PAD,
+
+ /**
+ * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
+ */
BATADV_ATTR_ACTIVE,
+
+ /**
+ * @BATADV_ATTR_TT_ADDRESS: Client MAC address
+ */
BATADV_ATTR_TT_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TT_TTVN: Translation table version
+ */
BATADV_ATTR_TT_TTVN,
+
+ /**
+ * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
+ */
BATADV_ATTR_TT_LAST_TTVN,
+
+ /**
+ * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
+ */
BATADV_ATTR_TT_CRC32,
+
+ /**
+ * @BATADV_ATTR_TT_VID: VLAN ID
+ */
BATADV_ATTR_TT_VID,
+
+ /**
+ * @BATADV_ATTR_TT_FLAGS: Translation table client flags
+ */
BATADV_ATTR_TT_FLAGS,
+
+ /**
+ * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
+ */
BATADV_ATTR_FLAG_BEST,
+
+ /**
+ * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
+ */
BATADV_ATTR_LAST_SEEN_MSECS,
+
+ /**
+ * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
+ */
BATADV_ATTR_NEIGH_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_TQ: TQ to neighbour
+ */
BATADV_ATTR_TQ,
+
+ /**
+ * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
+ */
BATADV_ATTR_THROUGHPUT,
+
+ /**
+ * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
+ */
BATADV_ATTR_BANDWIDTH_UP,
+
+ /**
+ * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
+ */
BATADV_ATTR_BANDWIDTH_DOWN,
+
+ /**
+ * @BATADV_ATTR_ROUTER: Gateway router MAC address
+ */
BATADV_ATTR_ROUTER,
+
+ /**
+ * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
+ */
BATADV_ATTR_BLA_OWN,
+
+ /**
+ * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
+ */
BATADV_ATTR_BLA_ADDRESS,
+
+ /**
+ * @BATADV_ATTR_BLA_VID: BLA VLAN ID
+ */
BATADV_ATTR_BLA_VID,
+
+ /**
+ * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
+ */
BATADV_ATTR_BLA_BACKBONE,
+
+ /**
+ * @BATADV_ATTR_BLA_CRC: BLA CRC
+ */
BATADV_ATTR_BLA_CRC,
+
/* add attributes above here, update the policy in netlink.c */
+
+ /**
+ * @__BATADV_ATTR_AFTER_LAST: internal use
+ */
__BATADV_ATTR_AFTER_LAST,
+
+ /**
+ * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
+ */
NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
+
+ /**
+ * @BATADV_ATTR_MAX: highest attribute number currently defined
+ */
BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
};
/**
* enum batadv_nl_commands - supported batman-adv netlink commands
- *
- * @BATADV_CMD_UNSPEC: unspecified command to catch errors
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device
- * @BATADV_CMD_TP_METER: Start a tp meter session
- * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
- * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
- * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
- * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations
- * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
- * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
- * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
- * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
- * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones
- * @__BATADV_CMD_AFTER_LAST: internal use
- * @BATADV_CMD_MAX: highest used command number
*/
enum batadv_nl_commands {
+ /**
+ * @BATADV_CMD_UNSPEC: unspecified command to catch errors
+ */
BATADV_CMD_UNSPEC,
+
+ /**
+ * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
+ * device
+ */
BATADV_CMD_GET_MESH_INFO,
+
+ /**
+ * @BATADV_CMD_TP_METER: Start a tp meter session
+ */
BATADV_CMD_TP_METER,
+
+ /**
+ * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
+ */
BATADV_CMD_TP_METER_CANCEL,
+
+ /**
+ * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
+ */
BATADV_CMD_GET_ROUTING_ALGOS,
+
+ /**
+ * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+ */
BATADV_CMD_GET_HARDIFS,
+
+ /**
+ * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
+ */
BATADV_CMD_GET_TRANSTABLE_LOCAL,
+
+ /**
+ * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations
+ */
BATADV_CMD_GET_TRANSTABLE_GLOBAL,
+
+ /**
+ * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
+ */
BATADV_CMD_GET_ORIGINATORS,
+
+ /**
+ * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
+ */
BATADV_CMD_GET_NEIGHBORS,
+
+ /**
+ * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
+ */
BATADV_CMD_GET_GATEWAYS,
+
+ /**
+ * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
+ */
BATADV_CMD_GET_BLA_CLAIM,
+
+ /**
+ * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance
+ * backbones
+ */
BATADV_CMD_GET_BLA_BACKBONE,
+
/* add new commands above here */
+
+ /**
+ * @__BATADV_CMD_AFTER_LAST: internal use
+ */
__BATADV_CMD_AFTER_LAST,
+
+ /**
+ * @BATADV_CMD_MAX: highest used command number
+ */
BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
};
/**
* enum batadv_tp_meter_reason - reason of a tp meter test run stop
- * @BATADV_TP_REASON_COMPLETE: sender finished tp run
- * @BATADV_TP_REASON_CANCEL: sender was stopped during run
- * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't
- * answer
- * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
- * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already
- * ongoing
- * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
- * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
- * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
*/
enum batadv_tp_meter_reason {
+ /**
+ * @BATADV_TP_REASON_COMPLETE: sender finished tp run
+ */
BATADV_TP_REASON_COMPLETE = 3,
+
+ /**
+ * @BATADV_TP_REASON_CANCEL: sender was stopped during run
+ */
BATADV_TP_REASON_CANCEL = 4,
+
/* error status >= 128 */
+
+ /**
+ * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or
+ * didn't answer
+ */
BATADV_TP_REASON_DST_UNREACHABLE = 128,
+
+ /**
+ * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
+ */
BATADV_TP_REASON_RESEND_LIMIT = 129,
+
+ /**
+ * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node
+ * already ongoing
+ */
BATADV_TP_REASON_ALREADY_ONGOING = 130,
+
+ /**
+ * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
+ */
BATADV_TP_REASON_MEMORY_ERROR = 131,
+
+ /**
+ * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
+ */
BATADV_TP_REASON_CANT_SEND = 132,
+
+ /**
+ * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
+ */
BATADV_TP_REASON_TOO_MANY = 133,
};
--
2.11.0
4 years, 6 months
[B.A.T.M.A.N.] [PATCH 1/3] batman-adv: Add extack to ndo_add_slave
by Sven Eckelmann
From: David Ahern <dsahern(a)gmail.com>
Pass extack to do_set_master and down to ndo_add_slave
Signed-off-by: David Ahern <dsahern(a)gmail.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
[sven(a)narfation.org: Add compat code]
Signed-off-by: Sven Eckelmann <sven(a)narfation.org>
---
compat.h | 7 +++++++
net/batman-adv/soft-interface.c | 3 ++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/compat.h b/compat.h
index e43c4136..c10ad589 100644
--- a/compat.h
+++ b/compat.h
@@ -152,4 +152,11 @@ static int __batadv_interface_kill_vid(struct net_device *dev, __be16 proto,\
#endif /* < KERNEL_VERSION(4, 6, 0) */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+
+#define batadv_softif_slave_add(__dev, __slave_dev, __extack) \
+ batadv_softif_slave_add(__dev, __slave_dev)
+
+#endif /* < KERNEL_VERSION(4, 15, 0) */
+
#endif /* _NET_BATMAN_ADV_COMPAT_H_ */
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 3af4b0b2..543d2c3e 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -867,7 +867,8 @@ static int batadv_softif_init_late(struct net_device *dev)
* Return: 0 if successful or error otherwise.
*/
static int batadv_softif_slave_add(struct net_device *dev,
- struct net_device *slave_dev)
+ struct net_device *slave_dev,
+ struct netlink_ext_ack *extack)
{
struct batadv_hard_iface *hard_iface;
struct net *net = dev_net(dev);
--
2.11.0
4 years, 7 months
[B.A.T.M.A.N.] [PATCH] batman-adv: Avoid spurious warnings from bat_v neigh_cmp implementation
by Sven Eckelmann
The neighbor compare API implementation for B.A.T.M.A.N. V checks whether
the neigh_ifinfo for this neighbor on a specific interface exists. A
warning is printed when it isn't found.
But it is not called inside a lock which would prevent that this
information is lost right before batadv_neigh_ifinfo_get. It must therefore
be expected that batadv_v_neigh_(cmp|is_sob) might not be able to get the
requested neigh_ifinfo.
A WARN_ON for such a situation seems not to be appropriate because this
will only flood the kernel logs. The warnings must therefore be removed.
Signed-off-by: Sven Eckelmann <sven.eckelmann(a)openmesh.com>
---
Cc: Antonio Quartulli <a(a)unstable.cc>
This patch is for https://www.open-mesh.org/issues/343
---
net/batman-adv/bat_v.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c
index 93ef1c0..69436d2 100644
--- a/net/batman-adv/bat_v.c
+++ b/net/batman-adv/bat_v.c
@@ -623,11 +623,11 @@ static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1,
int ret = 0;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
- if (WARN_ON(!ifinfo1))
+ if (!ifinfo1)
goto err_ifinfo1;
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
- if (WARN_ON(!ifinfo2))
+ if (!ifinfo2)
goto err_ifinfo2;
ret = ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput;
@@ -649,11 +649,11 @@ static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1,
bool ret = false;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
- if (WARN_ON(!ifinfo1))
+ if (!ifinfo1)
goto err_ifinfo1;
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
- if (WARN_ON(!ifinfo2))
+ if (!ifinfo2)
goto err_ifinfo2;
threshold = ifinfo1->bat_v.throughput / 4;
--
2.11.0
4 years, 7 months
