B.A.T.M.A.N January 2018

b.a.t.m.a.n@lists.open-mesh.org

11 participants
14 discussions

[B.A.T.M.A.N.] [PATCH] batman-adv: handle race condition for claims also in batadv_bla_rx

by Simon Wunderlich

From: Andreas Pape <apape(a)phoenixcontact.com> Like in the case of the patch for batadv_bla_tx to handle a race condition when claiming a mac address for bla, a similar situation can occur when claiming is triggered via batadv_bla_rx. This patch solves this with a similar approach as for batadv_bla_tx. Signed-off-by: Andreas Pape <apape(a)phoenixcontact.com> --- net/batman-adv/bridge_loop_avoidance.c | 31 ++++++++++++++++++++----------- net/batman-adv/translation-table.c | 26 ++++++++++++++++++++++++++ net/batman-adv/translation-table.h | 3 +++ 3 files changed, 49 insertions(+), 11 deletions(-) diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index d07e89e..cab8980 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1847,19 +1847,28 @@ bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb, if (!claim) { /* possible optimization: race for a claim */ - /* No claim exists yet, claim it for us! + /* Make sure this packet is not looping back + * from our own backbone. */ - batadv_dbg(BATADV_DBG_BLA, bat_priv, - "bla_rx(): Unclaimed MAC %pM found. Claim it. Local: %s\n", - ethhdr->h_source, - batadv_is_my_client(bat_priv, - ethhdr->h_source, vid) ? - "yes" : "no"); - batadv_handle_claim(bat_priv, primary_if, - primary_if->net_dev->dev_addr, - ethhdr->h_source, vid); - goto allow; + if (batadv_tt_local_has_timed_out(bat_priv, ethhdr->h_source, + vid, 100)) { + /* No claim exists yet, claim it for us! + */ + batadv_dbg(BATADV_DBG_BLA, bat_priv, + "bla_rx(): Unclaimed MAC %pM found. Claim it. Local: %s\n", + ethhdr->h_source, + batadv_is_my_client(bat_priv, + ethhdr->h_source, vid) ? + "yes" : "no"); + + batadv_handle_claim(bat_priv, primary_if, + primary_if->net_dev->dev_addr, + ethhdr->h_source, vid); + goto allow; + } else { + goto handled; + } } /* if it is our own claim ... */ diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index e75b493..b908195 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -4380,3 +4380,29 @@ void batadv_tt_cache_destroy(void) kmem_cache_destroy(batadv_tt_req_cache); kmem_cache_destroy(batadv_tt_roam_cache); } + +bool batadv_tt_local_has_timed_out(struct batadv_priv *bat_priv, + const u8 *addr, unsigned short vid, + unsigned int timeout) +{ + struct batadv_tt_local_entry *tt_local_entry; + bool ret = true; + + tt_local_entry = batadv_tt_local_hash_find(bat_priv, addr, vid); + if (!tt_local_entry) + goto out; + /* Check if the client has been logically deleted (but is kept for + * consistency purpose) + */ + if ((tt_local_entry->common.flags & BATADV_TT_CLIENT_PENDING) || + (tt_local_entry->common.flags & BATADV_TT_CLIENT_ROAM)) + goto out; + /* Check that the tt_local_entry has a certain age */ + if (!batadv_has_timed_out(tt_local_entry->last_seen, timeout)) + ret = false; + +out: + if (tt_local_entry) + batadv_tt_local_entry_put(tt_local_entry); + return ret; +} diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h index 411d586..b05d0d8 100644 --- a/net/batman-adv/translation-table.h +++ b/net/batman-adv/translation-table.h @@ -65,5 +65,8 @@ bool batadv_tt_global_is_isolated(struct batadv_priv *bat_priv, int batadv_tt_cache_init(void); void batadv_tt_cache_destroy(void); +bool batadv_tt_local_has_timed_out(struct batadv_priv *bat_priv, + const u8 *addr, unsigned short vid, + unsigned int timeout); #endif /* _NET_BATMAN_ADV_TRANSLATION_TABLE_H_ */ -- 1.7.0.4

3 years, 8 months

[B.A.T.M.A.N.] [PATCH 00/17] pull request for net-next: batman-adv 2016-10-27

by Simon Wunderlich

Hi David, this is our first feature pull request for batman-adv (mostly containing code cleanup stuff), there are at least two more to come. Please pull or let me know of any problem! Thank you, Simon The following changes since commit 29fbff8698fc0ac1a1d74584b258e0bf18b469f9: Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net (2016-10-13 21:40:23 -0700) are available in the git repository at: git://git.open-mesh.org/linux-merge.git tags/batadv-next-for-davem-20161027 for you to fetch changes up to 4c7da0f6dbcde2431d773ce03cde5e7abede54e0: batman-adv: Avoid precedence issues in macros (2016-10-19 08:37:54 +0200) ---------------------------------------------------------------- This code cleanup patchset includes the following changes (chronological order): - bump version strings, by Simon Wunderlich - README updates/clean up, by Sven Eckelmann (4 patches) - Code clean up and restructuring by Sven Eckelmann (2 patches) - Kerneldoc fix in forw_packet structure, by Linus Luessing - Remove unused argument in dbg_arp, by Antonio Quartulli - Add support to build batman-adv without wireless, by Linus Luessing - Restructure error handling for is_ap_isolated, by Markus Elfring - Remove unused initialization in various functions, by Sven Eckelmann - Use better names for fragment and gateway list heads, by Sven Eckelmann (2 patches) - Convert to octal permissions for files, by Sven Eckelmann - Avoid precedence issues for some macros, by Sven Eckelmann ---------------------------------------------------------------- Antonio Quartulli (1): batman-adv: remove unsed argument from batadv_dbg_arp() function Linus Lüssing (2): batman-adv: fix batadv_forw_packet kerneldoc for list attribute batman-adv: Allow selecting BATMAN V if CFG80211 is not built Markus Elfring (1): batman-adv: Less function calls in batadv_is_ap_isolated() after error detection Simon Wunderlich (1): batman-adv: Start new development cycle Sven Eckelmann (12): batman-adv: Add B.A.T.M.A.N. V sysfs files to README batman-adv: Add network_coding and mcast sysfs files to README batman-adv: Add dat, mcast, nc and neighbor debugfs files to README batman-adv: Document new nc, mcast and tpmeter log levels batman-adv: Remove unused function batadv_hash_delete batman-adv: Move batadv_sum_counter to soft-interface.c batman-adv: Remove unused batadv_icmp_user_cmd_type batman-adv: Remove needless init of variables on stack batman-adv: Use proper name for fragments list head batman-adv: Use proper name for gateway list head batman-adv: Use octal permissions instead of macros batman-adv: Avoid precedence issues in macros Documentation/networking/batman-adv.txt | 35 ++++++++++++---------- net/batman-adv/Kconfig | 2 +- net/batman-adv/bat_iv_ogm.c | 6 ++-- net/batman-adv/bat_v.c | 8 ++--- net/batman-adv/bat_v_ogm.c | 4 +-- net/batman-adv/debugfs.c | 26 ++++++++-------- net/batman-adv/distributed-arp-table.c | 17 ++++------- net/batman-adv/fragmentation.c | 18 +++++------ net/batman-adv/fragmentation.h | 2 +- net/batman-adv/gateway_client.c | 9 +++--- net/batman-adv/hash.h | 30 ------------------- net/batman-adv/icmp_socket.c | 5 ++-- net/batman-adv/log.c | 4 +-- net/batman-adv/log.h | 12 ++++---- net/batman-adv/main.c | 2 +- net/batman-adv/main.h | 27 ++--------------- net/batman-adv/network-coding.c | 8 ++--- net/batman-adv/originator.c | 10 +++---- net/batman-adv/packet.h | 12 +------- net/batman-adv/send.c | 2 +- net/batman-adv/soft-interface.c | 21 +++++++++++++ net/batman-adv/sysfs.c | 53 ++++++++++++++------------------- net/batman-adv/translation-table.c | 25 +++++++--------- net/batman-adv/types.h | 16 +++++----- 24 files changed, 149 insertions(+), 205 deletions(-)

4 years, 7 months

[B.A.T.M.A.N.] [PATCH RFC] batman-adv: always assume 2-byte packet alignment

by Matthias Schiffer

NIC drivers generally try to ensure that the "network header" is aligned to a 4-byte boundary. This is not always possible: When Ethernet frames are encapsulated in other packets with 4-byte aligned headers, the inner Ethernet header will have 4-byte alignment, and in consequence, the inner network header is aligned to 2, but not to 4 bytes. Most parts of batman-adv only care about 2-byte alignment; in particular, no unaligned accesses occur in performance-critical paths that handle actual payload data. This is not true for OGM handling: the seqno and crc fields are accessed as 32-bit values. To avoid these unaligned accesses, this patch reduces the expected packet alignment to 2 bytes for all of batadv's packet types. As no unaligned accesses existed on the performance-critical paths anyways, this chance does have any (positive or negative) effect on performance, but it still makes sense to avoid these accesses to prevent log noise when examining other unaligned accesses in the kernel while batman-adv is active. Signed-off-by: Matthias Schiffer <mschiffer(a)universe-factory.net> --- include/uapi/linux/batadv_packet.h | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index daefd728..894d8d2f 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -196,8 +196,6 @@ struct batadv_bla_claim_dst { __be16 group; /* group id */ }; -#pragma pack() - /** * struct batadv_ogm_packet - ogm (routing protocol) packet * @packet_type: batman-adv packet type, part of the general header @@ -222,9 +220,6 @@ struct batadv_ogm_packet { __u8 reserved; __u8 tq; __be16 tvlv_len; - /* __packed is not needed as the struct size is divisible by 4, - * and the largest data type in this struct has a size of 4. - */ }; #define BATADV_OGM_HLEN sizeof(struct batadv_ogm_packet) @@ -249,9 +244,6 @@ struct batadv_ogm2_packet { __u8 orig[ETH_ALEN]; __be16 tvlv_len; __be32 throughput; - /* __packed is not needed as the struct size is divisible by 4, - * and the largest data type in this struct has a size of 4. - */ }; #define BATADV_OGM2_HLEN sizeof(struct batadv_ogm2_packet) @@ -405,7 +397,6 @@ struct batadv_icmp_packet_rr { * misalignment of the payload after the ethernet header. It may also lead to * leakage of information when the padding it not initialized before sending. */ -#pragma pack(2) /** * struct batadv_unicast_packet - unicast packet for network payload @@ -533,8 +524,6 @@ struct batadv_coded_packet { __be16 coded_len; }; -#pragma pack() - /** * struct batadv_unicast_tvlv_packet - generic unicast packet with tvlv payload * @packet_type: batman-adv packet type, part of the general header @@ -641,4 +630,6 @@ struct batadv_tvlv_mcast_data { __u8 reserved[3]; }; +#pragma pack() + #endif /* _UAPI_LINUX_BATADV_PACKET_H_ */ -- 2.16.1

5 years

[B.A.T.M.A.N.] [PATCH maint] batman-adv: Fix internal interface indices types

by Sven Eckelmann

batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: d1fbb61d0534 ("raw socket operations added: create / destroy / bind / send broadcast of own OGMs implemented orig interval configurable via /proc/net/batman-adv/orig_interval") Fixes: ea6f8d42a595 ("batman-adv: move /proc interface handling to /sys") Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- net/batman-adv/bat_iv_ogm.c | 24 ++++++++++++++---------- net/batman-adv/hard-interface.c | 9 +++++++-- net/batman-adv/originator.c | 4 ++-- net/batman-adv/originator.h | 4 ++-- net/batman-adv/types.h | 11 ++++++----- 5 files changed, 31 insertions(+), 21 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 79e32638..ed4be9d3 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -157,7 +157,7 @@ static void batadv_iv_ogm_orig_free(struct batadv_orig_node *orig_node) * Return: 0 on success, a negative error code otherwise. */ static int batadv_iv_ogm_orig_add_if(struct batadv_orig_node *orig_node, - int max_if_num) + unsigned int max_if_num) { void *data_ptr; size_t old_size; @@ -201,7 +201,8 @@ static int batadv_iv_ogm_orig_add_if(struct batadv_orig_node *orig_node, */ static void batadv_iv_ogm_drop_bcast_own_entry(struct batadv_orig_node *orig_node, - int max_if_num, int del_if_num) + unsigned int max_if_num, + unsigned int del_if_num) { size_t chunk_size; size_t if_offset; @@ -239,7 +240,8 @@ batadv_iv_ogm_drop_bcast_own_entry(struct batadv_orig_node *orig_node, */ static void batadv_iv_ogm_drop_bcast_own_sum_entry(struct batadv_orig_node *orig_node, - int max_if_num, int del_if_num) + unsigned int max_if_num, + unsigned int del_if_num) { size_t if_offset; void *data_ptr; @@ -276,7 +278,8 @@ batadv_iv_ogm_drop_bcast_own_sum_entry(struct batadv_orig_node *orig_node, * Return: 0 on success, a negative error code otherwise. */ static int batadv_iv_ogm_orig_del_if(struct batadv_orig_node *orig_node, - int max_if_num, int del_if_num) + unsigned int max_if_num, + unsigned int del_if_num) { spin_lock_bh(&orig_node->bat_iv.ogm_cnt_lock); @@ -311,7 +314,8 @@ static struct batadv_orig_node * batadv_iv_ogm_orig_get(struct batadv_priv *bat_priv, const u8 *addr) { struct batadv_orig_node *orig_node; - int size, hash_added; + int hash_added; + size_t size; orig_node = batadv_orig_hash_find(bat_priv, addr); if (orig_node) @@ -893,7 +897,7 @@ batadv_iv_ogm_slide_own_bcast_window(struct batadv_hard_iface *hard_iface) u32 i; size_t word_index; u8 *w; - int if_num; + unsigned int if_num; for (i = 0; i < hash->size; i++) { head = &hash->table[i]; @@ -1023,7 +1027,7 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, struct batadv_neigh_node *tmp_neigh_node = NULL; struct batadv_neigh_node *router = NULL; struct batadv_orig_node *orig_node_tmp; - int if_num; + unsigned int if_num; u8 sum_orig, sum_neigh; u8 *neigh_addr; u8 tq_avg; @@ -1182,7 +1186,7 @@ static bool batadv_iv_ogm_calc_tq(struct batadv_orig_node *orig_node, u8 total_count; u8 orig_eq_count, neigh_rq_count, neigh_rq_inv, tq_own; unsigned int neigh_rq_inv_cube, neigh_rq_max_cube; - int if_num; + unsigned int if_num; unsigned int tq_asym_penalty, inv_asym_penalty; unsigned int combined_tq; unsigned int tq_iface_penalty; @@ -1702,9 +1706,9 @@ static void batadv_iv_ogm_process(const struct sk_buff *skb, int ogm_offset, if (is_my_orig) { unsigned long *word; - int offset; + size_t offset; s32 bit_pos; - s16 if_num; + unsigned int if_num; u8 *weight; orig_neigh_node = batadv_iv_ogm_orig_get(bat_priv, diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index 5f186bff..68b54a39 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -763,6 +763,11 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface, hard_iface->soft_iface = soft_iface; bat_priv = netdev_priv(hard_iface->soft_iface); + if (bat_priv->num_ifaces >= UINT_MAX) { + ret = -ENOSPC; + goto err_dev; + } + ret = netdev_master_upper_dev_link(hard_iface->net_dev, soft_iface, NULL, NULL, NULL); if (ret) @@ -876,7 +881,7 @@ void batadv_hardif_disable_interface(struct batadv_hard_iface *hard_iface, batadv_hardif_recalc_extra_skbroom(hard_iface->soft_iface); /* nobody uses this interface anymore */ - if (!bat_priv->num_ifaces) { + if (bat_priv->num_ifaces == 0) { batadv_gw_check_client_stop(bat_priv); if (autodel == BATADV_IF_CLEANUP_AUTO) @@ -912,7 +917,7 @@ batadv_hardif_add_interface(struct net_device *net_dev) if (ret) goto free_if; - hard_iface->if_num = -1; + hard_iface->if_num = 0; hard_iface->net_dev = net_dev; hard_iface->soft_iface = NULL; hard_iface->if_status = BATADV_IF_NOT_IN_USE; diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 58a7d927..74782426 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -1569,7 +1569,7 @@ int batadv_orig_dump(struct sk_buff *msg, struct netlink_callback *cb) * Return: 0 on success or negative error number in case of failure */ int batadv_orig_hash_add_if(struct batadv_hard_iface *hard_iface, - int max_if_num) + unsigned int max_if_num) { struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); struct batadv_algo_ops *bao = bat_priv->algo_ops; @@ -1611,7 +1611,7 @@ int batadv_orig_hash_add_if(struct batadv_hard_iface *hard_iface, * Return: 0 on success or negative error number in case of failure */ int batadv_orig_hash_del_if(struct batadv_hard_iface *hard_iface, - int max_if_num) + unsigned int max_if_num) { struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); struct batadv_hashtable *hash = bat_priv->orig_hash; diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h index 8e543a3c..15d896b2 100644 --- a/net/batman-adv/originator.h +++ b/net/batman-adv/originator.h @@ -73,9 +73,9 @@ int batadv_orig_seq_print_text(struct seq_file *seq, void *offset); int batadv_orig_dump(struct sk_buff *msg, struct netlink_callback *cb); int batadv_orig_hardif_seq_print_text(struct seq_file *seq, void *offset); int batadv_orig_hash_add_if(struct batadv_hard_iface *hard_iface, - int max_if_num); + unsigned int max_if_num); int batadv_orig_hash_del_if(struct batadv_hard_iface *hard_iface, - int max_if_num); + unsigned int max_if_num); struct batadv_orig_node_vlan * batadv_orig_node_vlan_new(struct batadv_orig_node *orig_node, unsigned short vid); diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index bb157841..a5aa6d61 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -167,7 +167,7 @@ struct batadv_hard_iface { struct list_head list; /** @if_num: identificator of the interface */ - s16 if_num; + unsigned int if_num; /** @if_status: status of the interface for batman-adv */ char if_status; @@ -1596,7 +1596,7 @@ struct batadv_priv { atomic_t batman_queue_left; /** @num_ifaces: number of interfaces assigned to this mesh interface */ - char num_ifaces; + unsigned int num_ifaces; /** @mesh_obj: kobject for sysfs mesh subdirectory */ struct kobject *mesh_obj; @@ -2186,15 +2186,16 @@ struct batadv_algo_orig_ops { * orig_node due to a new hard-interface being added into the mesh * (optional) */ - int (*add_if)(struct batadv_orig_node *orig_node, int max_if_num); + int (*add_if)(struct batadv_orig_node *orig_node, + unsigned int max_if_num); /** * @del_if: ask the routing algorithm to apply the needed changes to the * orig_node due to an hard-interface being removed from the mesh * (optional) */ - int (*del_if)(struct batadv_orig_node *orig_node, int max_if_num, - int del_if_num); + int (*del_if)(struct batadv_orig_node *orig_node, + unsigned int max_if_num, unsigned int del_if_num); #ifdef CONFIG_BATMAN_ADV_DEBUGFS /** @print: print the originator table (optional) */ -- 2.11.0

5 years

Re: [B.A.T.M.A.N.] limit of if per batman

by Sven Eckelmann

On Mittwoch, 25. Januar 2017 03:18:10 CET jens wrote: > On 24.01.2017 14:39, Sven Eckelmann wrote: > > There is no artificial limit added by batman-adv. But transmitting a lot of > > broadcasts over 255 virtual links sharing the same physical link > > might get interesting (independent of batman-adv). > > this made me curious , and i modified your script a bit - turns out > after the 127. IF you add to batman-adv you get an Error - > all 510 gretap links was succesfully build ... > # ifconfig |grep gre| wc -l > 515 > # batctl if|sort|wc -l > 127 > the error is mainly > *Error - can't write to file > '/sys/class/net/gre128/batman_adv/mesh_iface': Cannot allocate memory [...] > [113990.684947] [<ffffffff8107c16e>] ? __warn+0xbe/0xe0 [113990.684955] > [<ffffffffc017a804>] ? batadv_orig_hash_add_if+0x94/0x140 [batman_adv] > [113990.684961] [<ffffffff811a7b10>] ? kmalloc_slab+0x90/0xa0 > [113990.684966] [<ffffffff811e08c5>] ? __kmalloc+0x25/0x580 > [113990.684971] [<ffffffff815ef9d7>] ? _raw_spin_lock_irqsave+0x17/0x39 > [113990.684977] [<ffffffff81432c11>] ? _crng_backtrack_protect+0x31/0x70 > [113990.684981] [<ffffffff811e0ebc>] ? kmem_cache_alloc_trace+0x9c/0x540 > [113990.684986] [<ffffffff814340b7>] ? get_random_bytes+0xe7/0x1c0 > [113990.684991] [<ffffffffc017a804>] ? [...] I would guess that your system mostly fails becauseit cannot handle the allocation of the "large" arrays which store: * @bcast_own: set of bitfields (one per hard-interface) where each one counts * the number of our OGMs this orig_node rebroadcasted "back" to us (relative * to last_real_seqno). Every bitfield is BATADV_TQ_LOCAL_WINDOW_SIZE bits long. * @bcast_own_sum: sum of bcast_own Kind regards, Sven

5 years, 1 month

[B.A.T.M.A.N.] [PATCH maint] batman-adv: fix packet checksum in receive path

by Matthias Schiffer

skb_postpull_rcsum() is necessary after eth_type_trans() to adjust the skb checksum, otherwise log spam of the form "bat0: hw csum failure" will result when packets with CHECKSUM_COMPLETE are received (at least in some setups, e.g. when stacking batman-adv on top of VXLAN). Signed-off-by: Matthias Schiffer <mschiffer(a)universe-factory.net> --- I don't know what the exact circumstances are that trigger the log spam, but it seems this was broken forever (I could also reproduce the issue with our compat-14 legacy branch)... so please ask David to queue this up for stable :) net/batman-adv/soft-interface.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index c95e2b26..edeffcb9 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -459,13 +459,7 @@ void batadv_interface_rx(struct net_device *soft_iface, /* skb->dev & skb->pkt_type are set here */ skb->protocol = eth_type_trans(skb, soft_iface); - - /* should not be necessary anymore as we use skb_pull_rcsum() - * TODO: please verify this and remove this TODO - * -- Dec 21st 2009, Simon Wunderlich - */ - - /* skb->ip_summed = CHECKSUM_UNNECESSARY; */ + skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); batadv_inc_counter(bat_priv, BATADV_CNT_RX); batadv_add_counter(bat_priv, BATADV_CNT_RX_BYTES, -- 2.16.0

5 years, 2 months

[B.A.T.M.A.N.] [PATCH maint v2 1/2] batman-adv: fix packet checksum in receive path

by Matthias Schiffer

eth_type_trans() internally calls skb_pull(), which does not adjust the skb checksum; skb_postpull_rcsum() is necessary to avoid log spam of the form "bat0: hw csum failure" when packets with CHECKSUM_COMPLETE are received. Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do nor occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Signed-off-by: Matthias Schiffer <mschiffer(a)universe-factory.net> --- net/batman-adv/soft-interface.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 9f673cdf..6f7ce7a6 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -451,13 +451,7 @@ void batadv_interface_rx(struct net_device *soft_iface, /* skb->dev & skb->pkt_type are set here */ skb->protocol = eth_type_trans(skb, soft_iface); - - /* should not be necessary anymore as we use skb_pull_rcsum() - * TODO: please verify this and remove this TODO - * -- Dec 21st 2009, Simon Wunderlich - */ - - /* skb->ip_summed = CHECKSUM_UNNECESSARY; */ + skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); batadv_inc_counter(bat_priv, BATADV_CNT_RX); batadv_add_counter(bat_priv, BATADV_CNT_RX_BYTES, -- 2.16.1

5 years, 2 months

[B.A.T.M.A.N.] [PATCH maint] batman-adv: Fix DECLARE_EWMA compat with newer kernels

by Sven Eckelmann

Newer kernels removed the ACCESS_ONCE macro and are now using the more specialized forms READ_ONCE and WRITE_ONCE. The DECLARE_EWMA compat code used ACCESS_ONCE and fails to build against kernels which include the commit b899a850431e ("compiler.h: Remove ACCESS_ONCE()"). Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- compat-include/linux/average.h | 8 +++++--- compat-include/linux/compiler.h | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 3 deletions(-) create mode 100644 compat-include/linux/compiler.h diff --git a/compat-include/linux/average.h b/compat-include/linux/average.h index a1e3c254..ce847d5d 100644 --- a/compat-include/linux/average.h +++ b/compat-include/linux/average.h @@ -25,6 +25,8 @@ #include_next <linux/average.h> #include <linux/bug.h> +#include <linux/compiler.h> +#include <linux/log2.h> #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0) #undef DECLARE_EWMA @@ -77,7 +79,7 @@ static inline void ewma_##name##_add(struct ewma_##name *e, \ unsigned long val) \ { \ - unsigned long internal = ACCESS_ONCE(e->internal); \ + unsigned long internal = READ_ONCE(e->internal); \ unsigned long weight_rcp = ilog2(_weight_rcp); \ unsigned long precision = _precision; \ \ @@ -86,10 +88,10 @@ BUILD_BUG_ON((_precision) > 30); \ BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp); \ \ - ACCESS_ONCE(e->internal) = internal ? \ + WRITE_ONCE(e->internal, internal ? \ (((internal << weight_rcp) - internal) + \ (val << precision)) >> weight_rcp : \ - (val << precision); \ + (val << precision)); \ } #endif /* _NET_BATMAN_ADV_COMPAT_LINUX_AVERAGE_H */ diff --git a/compat-include/linux/compiler.h b/compat-include/linux/compiler.h new file mode 100644 index 00000000..62b6a2f9 --- /dev/null +++ b/compat-include/linux/compiler.h @@ -0,0 +1,37 @@ +/* Copyright (C) 2007-2017 B.A.T.M.A.N. contributors: + * + * Marek Lindner, Simon Wunderlich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + * This file contains macros for maintaining compatibility with older versions + * of the Linux kernel. + */ + +#ifndef _NET_BATMAN_ADV_COMPAT_LINUX_COMPILER_H_ +#define _NET_BATMAN_ADV_COMPAT_LINUX_COMPILER_H_ + +#include <linux/version.h> +#include_next <linux/compiler.h> + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 19, 0) + +#define READ_ONCE(x) ACCESS_ONCE(x) + +#define WRITE_ONCE(x, val) ({ \ + ACCESS_ONCE(x) = (val); \ +}) + +#endif /* < KERNEL_VERSION(3, 19, 0) */ + +#endif /* _NET_BATMAN_ADV_COMPAT_LINUX_COMPILER_H_ */ -- 2.11.0

5 years, 2 months

[B.A.T.M.A.N.] Simple Multicast on Batman-Adv

by Linchieh, Alex

Hello, I am having some issues getting simple multicast to work under batman-adv (2017.4). I have isolated the system as much as I can to reduce any uncertainties associated with wlan. My test environment consists of 4 virtual machines (ubuntu server 17.10) that are connected to each other via an internal ethernet network. I have been able to get the bat0 interface working over the ethernet interface (enp0s3). I am able to get the devices to ping eachother over the batman mesh as well as send iperf test data via TCP and UDP unicast modes. However I have not been able to get multicast running properly over the bat0 interface. The commands I am using to initialize batman-adv on each of the virtual machines are as follows: Sudo modprobe batman-adv Sudo ifconfig enp0s3 up Sudo batctl if add enp0s3 Sudo ifconfig bat0 192.168.14.x/24 where "x" is replaced with a number depending on the VM Sudo route add -host 239.255.10.10 bat0 I am using iperf in order to generate multicast traffic from the iperf client (192.168.14.1), and the iperf servers (192.168.2, 3, 4). The client which generates multicast data is able to "connect" to the multicast address and send data. Iperf also shows that the servers are able to subscribe to the multicast address however this is as far as I can get because the multicast data does not appear to ever reach the subscribers. When I use tcp dump to monitor the bat0 interfaces on these devices, I can see outgoing multicast traffic from the multicast sender, however the bat0 interface on the multicast receivers does not show anything, so it looks like none of the multicast traffic seems to be reaching any of the subscribers (or perhaps the multicast subscribers aren't able to communicate that they are subscribed to the multicast address). I have tested this with "batctl mm" set to both enabled and disabled. In addition, when I try to run "batctl mf" it says that I am not connected to a mesh (even though I am). I have also duplicated this test using just the internal Ethernet network (static IP addresses, batman disabled) and muilticast seems to work fine. This leads me to believe that there is something with batman-adv that I am overlooking. If anyone could shed some light on enabling multicast on batman that would be greatly appreciated. Thanks, Alex

5 years, 2 months

[B.A.T.M.A.N.] Master's Thesis on B.A.T.M.A.N routing protocol

by Md. Islam

Dear Concern, I am a final year masters student of Tampere University of Technology, Finland and my major is computer networking. Now, i have to start my thesis and B.A.T.M.A.N protocol seems very interesting to me. My supervisior told to work on B.A.T.M.A.N routing protocol by network coding. I would like to ask, does it has enough scope to develop by network code ? and could you please tell me what other area (right topic) of B.A.T.M.A.N is avaible for research or thesis topic. Thank you very much for your time. Waiting for your kind reply. Best Regards, Md. Shaiful Islam

5 years, 2 months

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

B.A.T.M.A.N January 2018