Hi,
The problem lay with me not setting the cellid, and incorrectly setting the channel (put the option line at the wrong place). Thanks for the help, esp marek for all the IRC help.
On Wed, Feb 24, 2010 at 10:30 AM, x@muc.ccc.de wrote:
hi!
I have Batman-adv r1575 on openwrt 8.09.2, but i can't find any
originators.
hm, would be nice to know on what architecture... :)
On a clean install of openwrt with batman: Enable wifi Set channel to 1 set mode to ahdemo restart
Is there something I missed?
you should set the mtu to batman-interface-mtu + 24 (so usually 1524) - but i doubt that originator messages are dumped because of this.
it reminds me of initial tries with mixed batman 0.1 and batman 0.2 nodes. the protocol obviously isn't compatible between those.
otherwise it would be interesting to know whether your wifi interface and the batman interface are UP, and what /proc/net/batman-adv/interfaces says (wifi interface should be listed as active).
a tcpdump on your wifi interface should show whether any/originator messages are sent or received via the radio interface.
regards,
Chris