The commit d60b8fc69ef2 ("batman-adv: disable ethtool link speed detection when auto negotiation off") disabled the usage of ethtool's link_ksetting when auto negotation was enabled due to invalid values when used with tun/tap virtual net_devices. According to the patch, automatic measurements should be used for these kind of interfaces.
But there are major flaws with this argumentation:
* automatic measurements are not implemented * auto negotiation has nothing to do with the validity of the retrieved values
The first point has to be fixed by a longer patch series. The "validity" part of the second point must be addressed in the same patch series by dropping the usage of ethtool's link_ksetting (thus always doing automatic measurements over ethernet).
Drop the patch again to have more default values for various net_device types/configurations. The user can still overwrite them using the batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.
Reported-by: Matthias Schiffer mschiffer@universe-factory.net Signed-off-by: Sven Eckelmann sven@narfation.org --- compat-include/linux/ethtool.h | 2 -- net/batman-adv/bat_v_elp.c | 15 +-------------- 2 files changed, 1 insertion(+), 16 deletions(-)
diff --git a/compat-include/linux/ethtool.h b/compat-include/linux/ethtool.h index e1f39c33..8dcbe02c 100644 --- a/compat-include/linux/ethtool.h +++ b/compat-include/linux/ethtool.h @@ -21,7 +21,6 @@ struct batadv_ethtool_link_ksettings { struct { __u32 speed; __u8 duplex; - __u8 autoneg; } base; };
@@ -42,7 +41,6 @@ batadv_ethtool_get_link_ksettings(struct net_device *dev, return ret;
link_ksettings->base.duplex = cmd.duplex; - link_ksettings->base.autoneg = cmd.autoneg; link_ksettings->base.speed = ethtool_cmd_speed(&cmd);
return 0; diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 2614a9ca..a39af0ee 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -120,20 +120,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) rtnl_lock(); ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings); rtnl_unlock(); - - /* Virtual interface drivers such as tun / tap interfaces, VLAN, etc - * tend to initialize the interface throughput with some value for the - * sake of having a throughput number to export via ethtool. This - * exported throughput leaves batman-adv to conclude the interface - * throughput is genuine (reflecting reality), thus no measurements - * are necessary. - * - * Based on the observation that those interface types also tend to set - * the link auto-negotiation to 'off', batman-adv shall check this - * setting to differentiate between genuine link throughput information - * and placeholders installed by virtual interfaces. - */ - if (ret == 0 && link_settings.base.autoneg == AUTONEG_ENABLE) { + if (ret == 0) { /* link characteristics might change over time */ if (link_settings.base.duplex == DUPLEX_FULL) hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;