This patch adds a switch for the new multicast_mode setting in batman-adv.
Signed-off-by: Linus Lüssing linus.luessing@web.de --- README | 7 +++++++ man/batctl.8 | 4 ++++ sys.c | 6 ++++++ sys.h | 1 + 4 files changed, 18 insertions(+)
diff --git a/README b/README index 5af95c8..69c7a07 100644 --- a/README +++ b/README @@ -392,6 +392,13 @@ Usage: batctl network_coding|nc [0|1]
Note that network coding requires a working promiscuous mode on all interfaces.
+batctl multicast_mode +===================== + +display or modify the multicast mode setting + +Usage: batctl multicast_mode|mm [0|1] + batctl aggregation ==================
diff --git a/man/batctl.8 b/man/batctl.8 index 2fe5941..a8e8868 100644 --- a/man/batctl.8 +++ b/man/batctl.8 @@ -88,6 +88,10 @@ disable fragmentation. If no parameter is given the current network coding mode setting is displayed. Otherwise the parameter is used to enable or disable network coding. .br +.IP "\fBmulticast_mode\fP|\fBmm\fP [\fB0\fP|\fB1\fP]" +If no parameter is given the current multicast mode setting is displayed. Otherwise the parameter is used to enable or +disable multicast optimizations (i.e. disabling means always sending own multicast frames via classic flooding). +.br .IP "\fBloglevel\fP|\fBll\fP [\fBlevel\fP[ \fBlevel\fP[ \fBlevel\fP]] \fB...\fP]" If no parameter is given the current log level settings are displayed otherwise the parameter(s) is/are used to set the log level. Level 'none' disables all verbose logging. Level 'batman' enables messages related to routing / flooding / broadcasting. diff --git a/sys.c b/sys.c index 5cebf52..45fb656 100644 --- a/sys.c +++ b/sys.c @@ -96,6 +96,12 @@ const struct settings_data batctl_settings[BATCTL_SETTINGS_NUM] = { .opt_short = "nc", .sysfs_name = "network_coding", .params = sysfs_param_enable, + }, + { + .opt_long = "multicast_mode", + .opt_short = "mm", + .sysfs_name = "multicast_mode", + .params = sysfs_param_enable, }
}; diff --git a/sys.h b/sys.h index 2cbbcfb..9016501 100644 --- a/sys.h +++ b/sys.h @@ -46,6 +46,7 @@ enum batctl_settings_list { BATCTL_SETTINGS_BONDING, BATCTL_SETTINGS_FRAGMENTATION, BATCTL_SETTINGS_NETWORK_CODING, + BATCTL_SETTINGS_MULTICAST_MODE, BATCTL_SETTINGS_NUM, };