On Fri, Feb 25, 2011 at 08:44:33AM -0500, Vinay Tharigopula wrote:
I got the binaries from the openwrt prebuilt packages. However, now
I rebuilt the image and built batman-adv 2011.myself. I will try
this now and let you know.
However, now I am running into a much bigger issue. If two routers
are plugged in to the same switch, bridge loop avoidance doesnt work
and both of them are stopping responding to pings.
Could you try "batctl
ping" too and check whether this is working
If that's working but the normal pinging is not, then it should be
a layer 3 problem - in that case we'd need the outputs of "ip
route show" and "ip address show".
If batctl ping is already not working then "batctl o" and "batctl
if" output will be interesting.
Here is my config.
wlan1: Mesh Network.
wlan0: Infrastructure network.
eth0 : 4 lan ports
eth1: 1 wan port
br-lan : wlan0 eth0 eth1 bat0
Hmm, that looks sane and correct, should work like
Is there anything weird in the output of "dmesg"? Any errors or