Yes, this on open wrt.

----- Mail original ----- De: "Marek Lindner" mareklindner@neomailbox.ch À: "b a t m a n" b.a.t.m.a.n@lists.open-mesh.org Cc: "michael holcman1" michael.holcman1@free.fr, martin@hundeboll.net Envoyé: Dimanche 15 Juin 2014 16:41:57 Objet: Re: [B.A.T.M.A.N.] question about batman-adv auto run

On Sunday 15 June 2014 15:49:35 michael.holcman1@free.fr wrote:

Do you know how to auto run batman-adv, because, i have no answer where i write:/etc/init.d enable ?

Where i can located the configure fils as following ?

config 'mesh' 'bat0' option 'interface' 'wlan0' 'bride' option 'aggregated_ogms' option 'ap_isolation' option 'bonding' option 'fragmentation' option 'gw_bandwidth' option 'gw_mode' option 'gw_sel_class' option 'log_level' 'all' option 'orig_interval' '500' option 'vis_mode' option 'bridge_loop_avoidance' '1' option 'distributed_arp_table' option 'network_coding' option 'hop_penalty'

Are we talking about batman-adv on OpenWrt ? If so, you can read our documentation: http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config

Cheers, Marek

Hello, If i andersdood all the configuration in my following architecture, if i want to give IP address on each interfaces,i have to: - create a bridge on the PC,Wifi card and LTE card - creat a bat0 interface on each one, - i don't need to start /etc/conf/batman-adv enable since, when i installed kmod-batman-adv, i throw all the batman process.

I placed the config on the attached files

Tank's a lot for your help,

----- Mail original ----- De: "michael holcman1" michael.holcman1@free.fr À: cmsv@wirelesspt.net Cc: "The list for a Better Approach To Mobile Ad-hoc Networking" b.a.t.m.a.n@lists.open-mesh.org, "Marek Lindner" mareklindner@neomailbox.ch Envoyé: Dimanche 15 Juin 2014 18:54:33 Objet: Re: [B.A.T.M.A.N.] question about batman-adv auto run

Ok, -I have the open wrt OS.If i understand, the configuration file as to be in the /etc/config/ and it started alone ?

-Is my configuration correct ?

thank's,

----- Mail original ----- De: "cmsv" cmsv@wirelesspt.net À: "michael holcman1" michael.holcman1@free.fr Cc: "The list for a Better Approach To Mobile Ad-hoc Networking" b.a.t.m.a.n@lists.open-mesh.org Envoyé: Dimanche 15 Juin 2014 16:45:10 Objet: Re: [B.A.T.M.A.N.] question about batman-adv auto run

This is available only in openwrt based systems. It is in /etc/config/

There is no /etc/init.d for batman-adv. it is started along the network setup.

On 06/15/2014 09:49 AM, michael.holcman1@free.fr wrote:

Hello, Do you know how to auto run batman-adv, because, i have no answer where i write:/etc/init.d enable ?

Where i can located the configure fils as following ?

config 'mesh' 'bat0' option 'interface' 'wlan0' 'bride' option 'aggregated_ogms' option 'ap_isolation' option 'bonding' option 'fragmentation' option 'gw_bandwidth' option 'gw_mode' option 'gw_sel_class' option 'log_level' 'all' option 'orig_interval' '500' option 'vis_mode' option 'bridge_loop_avoidance' '1' option 'distributed_arp_table' option 'network_coding' option 'hop_penalty'

# yet another batX instance # config 'mesh' 'bat5' # option 'interfaces' 'second_mesh'