Hi, I am testing out batman 0.3-beta rv963 with openwrt-trunk (r10219) . I could get the expected results when i am using tun instead of kmod-batgat .
but when i use kmod-batgat even tho the tunnel gate0 is established the routing rules and firewall is same as with kmod-tun i cant get traffic thru gate0
My Setup:
---- Wired - - - - WiFi
192.168.111.1-----(WAN)-192.168.111.74(Gateway)10.1.125.158 - - - - - - 10-1-125-158 (Node2)
*With kmod-batgat:*
from ping 192.168.111.1 -I gate0
##on gateway root@10-1-125-158:~# lsmod |grep batgat batgat 10976 1
##Ping from Node root@Node2:~# ping 192.168.111.1 -I gate0 PING 192.168.111.1 (192.168.111.1): 56 data bytes --- 192.168.111.1 ping statistics --- 46 packets transmitted, 0 packets received, 100% packet loss
##tcpdump on node root@10-1-125-158:~# tcpdump -i gate0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on gate0, link-type EN10MB (Ethernet), capture size 96 bytes
0 packets captured 0 packets received by filter 0 packets dropped by kernel
*With kmod-tun:* root@10-1-125-158:/# lsmod |grep tun tun 6592 1
*##on Node*
batman -cd2 Gateway (#/255) Nexthop [outgoingIF], gw_class ... [ B.A.T.M.A.N. 0.3-beta rv963, MainIF/IP: ath0/10.1.124.248, UT: 0d 0h52m] => 10.1.125.158 (255 + 0) 10.1.125.158 [ ath0], gw_class 49 - 4MBit/1024KBit, reliability: 0
*##Ping from Node* root@Node2:~# ping 192.168.111.1 PING 192.168.111.1 (192.168.111.1): 56 data bytes 64 bytes from 192.168.111.1: seq=0 ttl=63 time=8.473 ms 64 bytes from 192.168.111.1: seq=1 ttl=63 time=6.585 ms
*##tcpDump on gateway's gate0*
root@10-1-125-158:/# tcpdump -i gate0 proto \icmp tcpdump: WARNING: arptype 65534 not supported by libpcap - falling back to cooked socket tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on gate0, link-type LINUX_SLL (Linux cooked), capture size 96 bytes 00:50:45.798376 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id 1004, seq 0, length 64 00:50:46.614360 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id 1004, seq 0, length 64 00:50:46.805310 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id 1004, seq 1, length 64 00:50:46.806369 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id 1004, seq 1, length 64
*##tcpDump on gateway's eth0* root@10-1-125-158:/# tcpdump -i eth0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 00:48:29.108148 IP 192.168.111.74 > 192.168.111.1: ICMP echo request, id 1003, seq 6, length 64 00:48:29.145367 IP 192.168.111.1 > 192.168.111.74: ICMP echo reply, id 1003, seq 6, length 64
Also at times ip rules dont appear on node and i have to restart batmand to get the network working.
hi, i try to help....with batgat on the gateway please check the kernel log.....on the client side run batman with -d 3 and check if you get a virtual ip from the gateway, on a fresh restart it can be a delay until you get an ip.
Am Mittwoch, 30. Januar 2008 23:20:44 schrieb Vinay Menon:
Hi, I am testing out batman 0.3-beta rv963 with openwrt-trunk (r10219) . I could get the expected results when i am using tun instead of kmod-batgat .
but when i use kmod-batgat even tho the tunnel gate0 is established the routing rules and firewall is same as with kmod-tun i cant get traffic thru gate0
My Setup:
---- Wired
- WiFi
192.168.111.1-----(WAN)-192.168.111.74(Gateway)10.1.125.158 - - - - - - 10-1-125-158 (Node2)
your setup is :
wan with 192.168.111.1 gateway with 10.1.125.158, 192.168.111.74 node with 10.1.125.158
???
*With kmod-batgat:*
from ping 192.168.111.1 -I gate0
##on gateway root@10-1-125-158:~# lsmod |grep batgat batgat 10976 1
##Ping from Node root@Node2:~# ping 192.168.111.1 -I gate0 PING 192.168.111.1 (192.168.111.1): 56 data bytes --- 192.168.111.1 ping statistics --- 46 packets transmitted, 0 packets received, 100% packet loss
##tcpdump on node root@10-1-125-158:~# tcpdump -i gate0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on gate0, link-type EN10MB (Ethernet), capture size 96 bytes
0 packets captured 0 packets received by filter 0 packets dropped by kernel
*With kmod-tun:* root@10-1-125-158:/# lsmod |grep tun tun 6592 1
*##on Node*
batman -cd2 Gateway (#/255) Nexthop [outgoingIF], gw_class ... [ B.A.T.M.A.N. 0.3-beta rv963, MainIF/IP: ath0/10.1.124.248, UT: 0d 0h52m] => 10.1.125.158 (255 + 0) 10.1.125.158 [ ath0], gw_class 49 - 4MBit/1024KBit, reliability: 0
*##Ping from Node* root@Node2:~# ping 192.168.111.1 PING 192.168.111.1 (192.168.111.1): 56 data bytes 64 bytes from 192.168.111.1: seq=0 ttl=63 time=8.473 ms 64 bytes from 192.168.111.1: seq=1 ttl=63 time=6.585 ms
*##tcpDump on gateway's gate0*
root@10-1-125-158:/# tcpdump -i gate0 proto \icmp tcpdump: WARNING: arptype 65534 not supported by libpcap - falling back to cooked socket tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on gate0, link-type LINUX_SLL (Linux cooked), capture size 96 bytes 00:50:45.798376 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id 1004, seq 0, length 64 00:50:46.614360 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id 1004, seq 0, length 64 00:50:46.805310 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id 1004, seq 1, length 64 00:50:46.806369 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id 1004, seq 1, length 64
*##tcpDump on gateway's eth0* root@10-1-125-158:/# tcpdump -i eth0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 00:48:29.108148 IP 192.168.111.74 > 192.168.111.1: ICMP echo request, id 1003, seq 6, length 64 00:48:29.145367 IP 192.168.111.1 > 192.168.111.74: ICMP echo reply, id 1003, seq 6, length 64
Also at times ip rules dont appear on node and i have to restart batmand to get the network working.
sorry,i was hasty in posting its working now. the problem was at my end. things working fine :) thanks
On Jan 31, 2008 10:08 AM, Andreas Langer an.langer@gmx.de wrote:
hi, i try to help....with batgat on the gateway please check the kernel log.....on the client side run batman with -d 3 and check if you get a virtual ip from the gateway, on a fresh restart it can be a delay until you get an ip.
Am Mittwoch, 30. Januar 2008 23:20:44 schrieb Vinay Menon:
Hi, I am testing out batman 0.3-beta rv963 with openwrt-trunk (r10219) . I could get the expected results when i am using tun instead of
kmod-batgat
.
but when i use kmod-batgat even tho the tunnel gate0 is established the routing rules and firewall is same as with kmod-tun i cant get traffic
thru
gate0
My Setup:
---- Wired
- WiFi
192.168.111.1-----(WAN)-192.168.111.74(Gateway)10.1.125.158 - - - - - - 10-1-125-158 (Node2)
your setup is :
wan with 192.168.111.1 gateway with 10.1.125.158, 192.168.111.74 node with 10.1.125.158
???
*With kmod-batgat:*
from ping 192.168.111.1 -I gate0
##on gateway root@10-1-125-158:~# lsmod |grep batgat batgat 10976 1
##Ping from Node root@Node2:~# ping 192.168.111.1 -I gate0 PING 192.168.111.1 (192.168.111.1): 56 data bytes --- 192.168.111.1 ping statistics --- 46 packets transmitted, 0 packets received, 100% packet loss
##tcpdump on node root@10-1-125-158:~# tcpdump -i gate0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on gate0, link-type EN10MB (Ethernet), capture size 96 bytes
0 packets captured 0 packets received by filter 0 packets dropped by kernel
*With kmod-tun:* root@10-1-125-158:/# lsmod |grep tun tun 6592 1
*##on Node*
batman -cd2 Gateway (#/255) Nexthop [outgoingIF], gw_class ... [ B.A.T.M.A.N. 0.3-beta rv963, MainIF/IP: ath0/10.1.124.248, UT: 0d 0h52m] => 10.1.125.158 (255 + 0) 10.1.125.158 [ ath0], gw_class 49
4MBit/1024KBit, reliability: 0
*##Ping from Node* root@Node2:~# ping 192.168.111.1 PING 192.168.111.1 (192.168.111.1): 56 data bytes 64 bytes from 192.168.111.1: seq=0 ttl=63 time=8.473 ms 64 bytes from 192.168.111.1: seq=1 ttl=63 time=6.585 ms
*##tcpDump on gateway's gate0*
root@10-1-125-158:/# tcpdump -i gate0 proto \icmp tcpdump: WARNING: arptype 65534 not supported by libpcap - falling back
to
cooked socket tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on gate0, link-type LINUX_SLL (Linux cooked), capture size 96 bytes 00:50:45.798376 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id
1004,
seq 0, length 64 00:50:46.614360 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id
1004,
seq 0, length 64 00:50:46.805310 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id
1004,
seq 1, length 64 00:50:46.806369 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id
1004,
seq 1, length 64
*##tcpDump on gateway's eth0* root@10-1-125-158:/# tcpdump -i eth0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 00:48:29.108148 IP 192.168.111.74 > 192.168.111.1: ICMP echo request, id 1003, seq 6, length 64 00:48:29.145367 IP 192.168.111.1 > 192.168.111.74: ICMP echo reply, id 1003, seq 6, length 64
Also at times ip rules dont appear on node and i have to restart
batmand
to get the network working.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
that sounds great, please contact me if there are more problems with the kernel module, i developed it and i want to know if there any bugs ;)
regards, andreas
Am Freitag, 1. Februar 2008 07:19:39 schrieb Vinay Menon:
sorry,i was hasty in posting its working now. the problem was at my end. things working fine :) thanks
On Jan 31, 2008 10:08 AM, Andreas Langer an.langer@gmx.de wrote:
hi, i try to help....with batgat on the gateway please check the kernel log.....on the client side run batman with -d 3 and check if you get a virtual ip from the gateway, on a fresh restart it can be a delay until you get an ip.
Am Mittwoch, 30. Januar 2008 23:20:44 schrieb Vinay Menon:
Hi, I am testing out batman 0.3-beta rv963 with openwrt-trunk (r10219) . I could get the expected results when i am using tun instead of
kmod-batgat
.
but when i use kmod-batgat even tho the tunnel gate0 is established the routing rules and firewall is same as with kmod-tun i cant get traffic
thru
gate0
My Setup:
---- Wired
- WiFi
192.168.111.1-----(WAN)-192.168.111.74(Gateway)10.1.125.158 - - - - -
- 10-1-125-158 (Node2)
your setup is :
wan with 192.168.111.1 gateway with 10.1.125.158, 192.168.111.74 node with 10.1.125.158
???
*With kmod-batgat:*
from ping 192.168.111.1 -I gate0
##on gateway root@10-1-125-158:~# lsmod |grep batgat batgat 10976 1
##Ping from Node root@Node2:~# ping 192.168.111.1 -I gate0 PING 192.168.111.1 (192.168.111.1): 56 data bytes --- 192.168.111.1 ping statistics --- 46 packets transmitted, 0 packets received, 100% packet loss
##tcpdump on node root@10-1-125-158:~# tcpdump -i gate0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on gate0, link-type EN10MB (Ethernet), capture size 96 bytes
0 packets captured 0 packets received by filter 0 packets dropped by kernel
*With kmod-tun:* root@10-1-125-158:/# lsmod |grep tun tun 6592 1
*##on Node*
batman -cd2 Gateway (#/255) Nexthop [outgoingIF], gw_class ... [ B.A.T.M.A.N. 0.3-beta rv963, MainIF/IP: ath0/10.1.124.248, UT: 0d 0h52m] => 10.1.125.158 (255 + 0) 10.1.125.158 [ ath0], gw_class 49
4MBit/1024KBit, reliability: 0
*##Ping from Node* root@Node2:~# ping 192.168.111.1 PING 192.168.111.1 (192.168.111.1): 56 data bytes 64 bytes from 192.168.111.1: seq=0 ttl=63 time=8.473 ms 64 bytes from 192.168.111.1: seq=1 ttl=63 time=6.585 ms
*##tcpDump on gateway's gate0*
root@10-1-125-158:/# tcpdump -i gate0 proto \icmp tcpdump: WARNING: arptype 65534 not supported by libpcap - falling back
to
cooked socket tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on gate0, link-type LINUX_SLL (Linux cooked), capture size 96 bytes 00:50:45.798376 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id
1004,
seq 0, length 64 00:50:46.614360 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id
1004,
seq 0, length 64 00:50:46.805310 IP 169.254.0.1 > 192.168.111.1: ICMP echo request, id
1004,
seq 1, length 64 00:50:46.806369 IP 192.168.111.1 > 169.254.0.1: ICMP echo reply, id
1004,
seq 1, length 64
*##tcpDump on gateway's eth0* root@10-1-125-158:/# tcpdump -i eth0 proto \icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 00:48:29.108148 IP 192.168.111.74 > 192.168.111.1: ICMP echo request, id 1003, seq 6, length 64 00:48:29.145367 IP 192.168.111.1 > 192.168.111.74: ICMP echo reply, id 1003, seq 6, length 64
Also at times ip rules dont appear on node and i have to restart
batmand
to get the network working.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
b.a.t.m.a.n@lists.open-mesh.org
-
Andreas Langer -
Vinay Menon