Hi,
I was talking today with Simon about the "License cleanup" changes. He would prefer when the *.license files don't exist (when possible). Luckily, I already wanted to convert these files (or at least the READMEs) to reStructuredText and I've already shown in these patchsets how the SPDX annotation should be done for the lrest files. So it was just logically to immediately post the conversion to rst and integration of this tag.
We've also discussed how the changelog should look like. It should be simple and we only wanted to show the date (not the time) anymore. And the actual changelog lists should be kept (mostly untouched - beside some minor format fixes to make it reStructuredText compatible).
This patchset is based on the "batctl: License cleanup" patchset.
Kind regards, Sven
Sven Eckelmann (2): batctl: Convert CHANGELOG to reStructuredText batctl: Convert README to reStructuredText
CHANGELOG | 56 ----- CHANGELOG.license | 2 - CHANGELOG.rst | 60 +++++ README | 614 ----------------------------------------------- README.license | 2 - README.rst | 694 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 754 insertions(+), 674 deletions(-) delete mode 100644 CHANGELOG delete mode 100644 CHANGELOG.license create mode 100644 CHANGELOG.rst delete mode 100644 README delete mode 100644 README.license create mode 100644 README.rst
The current format of the file is not well defined. The reStructuredText format (as used by other batman-adv related files) has the benefit that it is similar easy to read and write. And it allows other tools to parse the content of the file and convert it in a sensible way to a different file format.
Multiple git repository web-based management software also can directly render these files as properly formatted HTML output.
Signed-off-by: Sven Eckelmann sven@narfation.org --- CHANGELOG | 56 --------------------------------------------------- CHANGELOG.license | 2 -- CHANGELOG.rst | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 60 insertions(+), 58 deletions(-) delete mode 100644 CHANGELOG delete mode 100644 CHANGELOG.license create mode 100644 CHANGELOG.rst
diff --git a/CHANGELOG b/CHANGELOG deleted file mode 100644 index af9b676..0000000 --- a/CHANGELOG +++ /dev/null @@ -1,56 +0,0 @@ -batctl 2017.3 - - * bugs squashed: - - Fix error messages on traceroute send failures - - -- Thu, 28 Sep 2017 13:43:18 +0200 - -batctl 2017.2 - - * coding style cleanups and refactoring - - -- Fri, 28 Jul 2017 13:42:03 +0200 - -batctl 2017.1 - - * (no changes) - - -- Tue, 23 May 2017 11:40:21 +0200 - -batctl 2017.0 - - * remove root check for read-only sysfs and rtnl functionality - * coding style cleanups - * bugs squashed: - - fix check for root priviliges when started under modified effective uid - - -- Tue, 28 Feb 2017 17:22:49 +0100 - -batctl 2016.5 - - * reimplement traceroute/ping commands in userspace without debugfs - * switch interface manipulation from (legacy) sysfs to rtnetlink - * coding style cleanups - - -- Thu, 15 Dec 2016 18:11:55 +0100 - -batctl 2016.4: - - * integrate support for batman-adv netlink - * coding style cleanups - * documentation updates - * bugs squashed: - - fix endless loop in TP meter on some platforms - - fix build errors caused by name conflicts - - -- Thu, 27 Oct 2016 21:19:38 +0200 - -batctl 2016.3 - - * synchronize common headers with batman-adv - * support multicast logging and debug table - * split tcpdump OGM packet filter in OGM and OGMv2 filter - * add infrastructure to communicate with batadv netlink family - * integrate command to control new kernel throughput meter - - -- Thu, 01 Sep 2016 16:18:35 +0200 diff --git a/CHANGELOG.license b/CHANGELOG.license deleted file mode 100644 index a55d70e..0000000 --- a/CHANGELOG.license +++ /dev/null @@ -1,2 +0,0 @@ -SPDX-License-Identifier: GPL-2.0 -License-Filename: LICENSES/preferred/GPL-2.0 diff --git a/CHANGELOG.rst b/CHANGELOG.rst new file mode 100644 index 0000000..9083816 --- /dev/null +++ b/CHANGELOG.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0 + +2017.3 (2017-09-28) +=================== + +* bugs squashed: + + - Fix error messages on traceroute send failures + + +2017.2 (2017-06-28) +=================== + +* coding style cleanups and refactoring + + +2017.1 (2017-05-23) +==================== + +* (no changes) + + +2017.0 (2017-02-28) +=================== + +* remove root check for read-only sysfs and rtnl functionality +* coding style cleanups +* bugs squashed: + + - fix check for root priviliges when started under modified effective uid + + +2016.5 (2016-12-15) +=================== + +* reimplement traceroute/ping commands in userspace without debugfs +* switch interface manipulation from (legacy) sysfs to rtnetlink +* coding style cleanups + + +2016.4 (2016-10-27) +=================== + +* integrate support for batman-adv netlink +* coding style cleanups +* documentation updates +* bugs squashed: + + - fix endless loop in TP meter on some platforms + - fix build errors caused by name conflicts + + +2016.3 (2016-09-01) +=================== + +* synchronize common headers with batman-adv +* support multicast logging and debug table +* split tcpdump OGM packet filter in OGM and OGMv2 filter +* add infrastructure to communicate with batadv netlink family +* integrate command to control new kernel throughput meter
The current format of the file is not well defined. The reStructuredText format (as used by other batman-adv related files) has the benefit that it is similar easy to read and write. And it allows other tools to parse the content of the file and convert it in a sensible way to a different file format.
Multiple git repository web-based management software also can directly render these files as properly formatted HTML output.
Signed-off-by: Sven Eckelmann sven@narfation.org --- README | 614 -------------------------------------------------- README.license | 2 - README.rst | 694 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 694 insertions(+), 616 deletions(-) delete mode 100644 README delete mode 100644 README.license create mode 100644 README.rst
diff --git a/README b/README deleted file mode 100644 index ce049d4..0000000 --- a/README +++ /dev/null @@ -1,614 +0,0 @@ -############################################################################## -# batctl - B.A.T.M.A.N. advanced control and management tool # -############################################################################## - - - -Introduction -============ - -Why do I need batctl ? B.A.T.M.A.N. advanced operates on layer 2 and thus all -hosts participating in the virtual switch are completely transparent for all -protocols above layer 2. Therefore the common diagnosis tools do not work as -expected. To overcome these problems batctl was created. At the moment batctl -contains ping, traceroute, tcpdump and interfaces to the kernel module -settings. - - -How does it work ? -================== - -batctl uses the debugfs/batman_adv/bat0/socket device provided by the B.A.T.M.A.N. -advanced kernel module to inject custom icmp packets into the data flow. That's why -ping and traceroute work almost like their IP based counterparts. Tcpdump was -designed because B.A.T.M.A.N. advanced encapsulates all traffic within batman -packets, so that the normal tcpdump would not recognize the packets. - - -The bat-hosts file -================== - -This file is simliar to the /etc/hosts file. You can write one MAC address and -one host name per line. batctl will analyze the file to find the matching MAC -address to your provided host name. Host names are much easier to remember than -MAC addresses. ;) - - -batctl statistics -================= - -The batman-adv kernel module maintains a number of traffic counters which are exported -to user space. With batctl these counters can be easily retrieved. The output may vary -depending on which features have been compiled into the kernel module. For example, if -the distributed arp table (short: dat) wasn't selected as an option at compile time -its counters won't be shown. -Each module subsystem has its own counters which are indicated by their prefixes: - * mgmt - mesh protocol counters - * tt - translation table counters - * dat - distributed arp table counters -All counters without a prefix concern payload (pure user data) traffic. - -Usage: batctl statistics - -Example: - -$ batctl statistics - tx: 14 - tx_bytes: 1316 - tx_errors: 0 - rx: 14 - rx_bytes: 1316 - forward: 0 - forward_bytes: 0 - mgmt_tx: 18 - mgmt_tx_bytes: 762 - mgmt_rx: 17 - mgmt_rx_bytes: 1020 - tt_request_tx: 0 - tt_request_rx: 0 - tt_response_tx: 0 - tt_response_rx: 0 - tt_roam_adv_tx: 0 - tt_roam_adv_rx: 0 - dat_request_tx: 0 - dat_request_rx: 0 - dat_reply_tx: 1 - dat_reply_rx: 0 - -batctl translate -================ - -Translates a destination (hostname, IPv4, IPv6, MAC, bat_host-name) to the -originator mac address responsible for it. - -Usage: batctl translate mac|bat-host|host-name|IP-address - -Example: - -$ batctl translate www.google.de -02:ca:fe:af:fe:01 -$ batctl translate 02:ca:fe:af:fe:01 -02:ca:fe:af:fe:01 -$ batctl translate 192.168.1.2 -02:ca:fe:af:fe:05 -$ batctl translate fe:fe:00:00:09:01 -02:ca:fe:af:fe:05 -$ batctl translate 2001::1 -02:ca:fe:af:fe:05 - -batctl ping -============ - -Sends a Layer 2 batman-adv ping to check round trip time and connectivity - -Usage: batctl ping [parameters] mac|bat-host|host-name|IP-address -parameters: - -c ping packet count - -h print this help - -i interval in seconds - -t timeout in seconds - -T don't try to translate mac to originator address - -R record route - -Example: - -$ batctl ping fe:fe:00:00:09:01 -PING fe:fe:00:00:09:01 (fe:fe:00:00:09:01) 19(47) bytes of data -19 bytes from fe:fe:00:00:09:01 icmp_seq=1 ttl=43 time=8.74 ms -19 bytes from fe:fe:00:00:09:01 icmp_seq=2 ttl=43 time=7.48 ms -19 bytes from fe:fe:00:00:09:01 icmp_seq=3 ttl=43 time=8.23 ms -^C--- fe:fe:00:00:09:01 ping statistics --- -3 packets transmitted, 3 received, 0% packet loss -rtt min/avg/max/mdev = 7.476/8.151/8.743/1.267 ms - -batctl traceroute -================== - -Traceroute sends 3 packets to each hop, awaits the answers and prints out the -response times. - -Usage: batctl traceroute [parameters] mac|bat-host|host-name|IP-address - -Example: - -$ batctl traceroute fe:fe:00:00:09:01 -traceroute to fe:fe:00:00:09:01 (fe:fe:00:00:09:01), 50 hops max, 19 byte packets - 1: fe:fe:00:00:02:01 4.932 ms 2.338 ms 1.333 ms - 2: fe:fe:00:00:03:01 6.860 ms 1.579 ms 1.260 ms - 3: fe:fe:00:00:04:01 2.342 ms 1.547 ms 1.655 ms - 4: fe:fe:00:00:05:01 2.906 ms 2.211 ms 2.253 ms - 5: fe:fe:00:00:06:01 3.577 ms 2.687 ms 3.088 ms - 6: fe:fe:00:00:07:01 4.217 ms 5.741 ms 3.551 ms - 7: fe:fe:00:00:08:01 5.017 ms 5.547 ms 4.294 ms - 8: fe:fe:00:00:09:01 5.730 ms 4.970 ms 6.437 ms - - - -batctl tcpdump -=============== - -tcpdump layer 2 and/or layer 3 traffic on the given interface - -Usage: batctl tcpdump [parameters] interface [interface] -parameters: - -c compat filter - only display packets matching own compat version (14) - -h print this help - -n don't convert addresses to bat-host names - -p dump specific packet type - -x dump all packet types except specified -packet types: - 1 - batman ogm packets - 2 - batman icmp packets - 4 - batman unicast packets - 8 - batman broadcast packets - 16 - batman unicast tvlv packets - 32 - batman fragmented packets - 64 - batman tt / roaming packets - 128 - non batman packets - 129 - batman ogm & non batman packets - -tcpdump supports standard interfaces as well as raw wifi interfaces running in monitor mode. - -Example output for tcpdump: - -$ batctl tcpdump mesh0 -01:51:42.401188 BAT kansas: OGM via neigh kansas, seqno 6718, tq 255, ttl 50, v 9, flags [..I], length 28 -01:51:42.489735 BAT kansas: OGM via neigh wyoming, seqno 6718, tq 245, ttl 49, v 9, flags [.D.], length 28 -01:51:42.510330 BAT wyoming: OGM via neigh wyoming, seqno 6721, tq 255, ttl 50, v 9, flags [..I], length 28 -01:51:42.601092 BAT wyoming: OGM via neigh kansas, seqno 6721, tq 245, ttl 49, v 9, flags [.D.], length 28 -01:51:43.361076 BAT kansas > wyoming: ICMP echo request, id 0, seq 1, ttl 1, v 9, length 19 -01:51:43.365347 BAT wyoming > kansas: ICMP echo reply, id 0, seq 1, ttl 50, v 9, length 19 -01:51:43.372224 BAT kansas > wyoming: ICMP echo request, id 0, seq 2, ttl 1, v 9, length 19 -01:51:43.376506 BAT wyoming > kansas: ICMP echo reply, id 0, seq 2, ttl 50, v 9, length 19 -01:51:43.381250 BAT kansas: OGM via neigh kansas, seqno 6719, tq 255, ttl 50, v 9, flags [..I], length 28 -01:51:43.386281 BAT kansas > wyoming: ICMP echo request, id 0, seq 3, ttl 1, v 9, length 19 -01:51:43.387910 BAT wyoming > kansas: ICMP echo reply, id 0, seq 3, ttl 50, v 9, length 19 -01:51:43.479503 BAT kansas: OGM via neigh wyoming, seqno 6719, tq 245, ttl 49, v 9, flags [.D.], length 28 -01:51:43.509899 BAT wyoming: OGM via neigh wyoming, seqno 6722, tq 255, ttl 50, v 9, flags [..I], length 28 -01:51:43.600999 BAT wyoming: OGM via neigh kansas, seqno 6722, tq 245, ttl 49, v 9, flags [.D.], length 28 -01:51:44.381064 BAT kansas: OGM via neigh kansas, seqno 6720, tq 255, ttl 50, v 9, flags [..I], length 28 - -batctl bisect_iv -================ - -Analyzes the B.A.T.M.A.N. IV logfiles to build a small internal database of all sent sequence -numbers and routing table changes. This database can be used to search for routing loops -(default action), to trace OGMs of a host (use "-t" to specify the mac address or -bat-host name) throughout the network or to display routing tables of the nodes (use "-r" to -specify the mac address or bat-host name). You can name a specific sequence number or a range -using the "-s" option to limit the output's range. Furthermore you can filter the output by -specifying an originator (use "-o" to specify the mac address or bat-host name) to only see -data connected to this originator. If "-n" was given batctl will not replace the mac -addresses with bat-host names in the output. - -Usage: batctl bisect_iv [parameters] <file1> <file2> .. <fileN> -parameters: - -h print this help - -l run a loop detection of given mac address or bat-host (default) - -n don't convert addresses to bat-host names - -r print routing tables of given mac address or bat-host - -s seqno range to limit the output - -t trace seqnos of given mac address or bat-host - -Examples: - -$ batctl bisect_iv log/* -l uml3 -Analyzing routing tables of originator: uml3 [all sequence numbers] - -Checking host: uml3 -Path towards uml7 (seqno 9 via neigh uml5): -> uml5 -> uml6 -Path towards uml7 (seqno 10 via neigh uml4): -> uml4 -> uml5 -> uml6 -Path towards uml6 (seqno 4 via neigh uml4): -> uml4 -Path towards uml8 (seqno 12 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 -Path towards uml8 (seqno 203 via neigh uml4): -> uml4 -> uml6 -> uml7 -Path towards uml8 (seqno 391 via neigh uml2): -> uml2 -> uml3 -> uml2 aborted due to loop! -Path towards uml8 (seqno 396 via neigh uml4): -> uml4 -> uml6 -> uml7 -Path towards uml9 (seqno 10 via neigh uml5): -> uml5 -> uml6 -> uml7 -> uml9. -Path towards uml9 (seqno 10 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 -> uml9. -Path towards uml9 (seqno 11 via neigh uml4): -> uml4 -> uml6 -> uml7 -> uml8 -> uml9. -Path towards uml9 (seqno 12 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 -> uml8 -> uml9. -Path towards uml9 (seqno 21 via neigh uml5): -> uml5 -> uml6 -> uml7 -> uml8 -> uml9. -Path towards uml9 (seqno 22 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 -> uml8 -> uml9. - -$ ./batctl bisect_iv -t uml3 log/* -Sequence number flow of originator: uml3 [all sequence numbers] -[...] -+=> uml3 (seqno 19) -|- uml2 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] -| |- uml3 [tq: 154, ttl: 49, neigh: uml2, prev_sender: uml3] -| - uml1 [tq: 154, ttl: 49, neigh: uml2, prev_sender: uml3] -| |- uml3 [tq: 51, ttl: 48, neigh: uml1, prev_sender: uml2] -| - uml2 [tq: 51, ttl: 48, neigh: uml1, prev_sender: uml2] -|- uml5 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] -| |- uml6 [tq: 33, ttl: 48, neigh: uml5, prev_sender: uml3] -| | |- uml5 [tq: 11, ttl: 47, neigh: uml6, prev_sender: uml5] -| | |- uml7 [tq: 11, ttl: 47, neigh: uml6, prev_sender: uml5] -| | | |- uml8 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] -| | | | |- uml6 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] -| | | | |- uml9 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] -| | | | - uml7 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] -| | | |- uml6 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] -| | | |- uml9 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] -| | | - uml5 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] -| | - uml4 [tq: 11, ttl: 47, neigh: uml6, prev_sender: uml5] -| |- uml7 [tq: 33, ttl: 48, neigh: uml5, prev_sender: uml3] -| - uml4 [tq: 33, ttl: 48, neigh: uml5, prev_sender: uml3] -- uml4 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] - |- uml3 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] - |- uml6 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] - |- uml2 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] - - uml5 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] -+=> uml3 (seqno 20) -|- uml2 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] -| |- uml3 [tq: 160, ttl: 49, neigh: uml2, prev_sender: uml3] -| |- uml1 [tq: 160, ttl: 49, neigh: uml2, prev_sender: uml3] -| - uml4 [tq: 160, ttl: 49, neigh: uml2, prev_sender: uml3] -|- uml5 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] -| |- uml3 [tq: 43, ttl: 48, neigh: uml5, prev_sender: uml3] -| |- uml6 [tq: 43, ttl: 48, neigh: uml5, prev_sender: uml3] -| | |- uml8 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] -| | |- uml5 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] -| | |- uml7 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] -| | | |- uml8 [tq: 5, ttl: 46, neigh: uml7, prev_sender: uml6] -| | | | |- uml6 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] -| | | | |- uml9 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] -| | | | - uml7 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] -| | | - uml6 [tq: 5, ttl: 46, neigh: uml7, prev_sender: uml6] -| | - uml4 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] -| - uml4 [tq: 43, ttl: 48, neigh: uml5, prev_sender: uml3] -|- uml1 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] -| - uml2 [tq: 49, ttl: 48, neigh: uml1, prev_sender: uml3] -- uml4 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] - |- uml3 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] - |- uml6 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] - |- uml2 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] - - uml5 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] -[...] - -batctl originators -================== - -Check the Originators table - -Usage: batctl originators|o - -Example: - -$ batctl originators -[B.A.T.M.A.N. adv 2011.4.0, MainIF/MAC: eth0/fe:fe:00:00:01:01 (bat0)] - Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... -fe:fe:00:00:08:01 0.820s (194) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 65) fe:fe:00:00:02:01 (194) -fe:fe:00:00:03:01 0.980s (245) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 81) fe:fe:00:00:02:01 (245) -fe:fe:00:00:05:01 0.140s (221) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 76) fe:fe:00:00:02:01 (221) -fe:fe:00:00:04:01 0.010s (235) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:02:01 (235) fe:fe:00:00:03:01 ( 81) -fe:fe:00:00:09:01 0.830s (187) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 63) fe:fe:00:00:02:01 (187) -fe:fe:00:00:06:01 0.830s (213) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 71) fe:fe:00:00:02:01 (213) -fe:fe:00:00:02:01 0.240s (255) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 81) fe:fe:00:00:02:01 (255) -fe:fe:00:00:07:01 0.670s (200) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 68) fe:fe:00:00:02:01 (200) - -Since 2014.1.0, each batman interface has an individual originator table as well which is only used for routing. -These table explain to which neighbor a packet is forwarded when the packet is received on the specified interface. - -Example: - -$ batctl originators -i eth0 -[B.A.T.M.A.N. adv master-b82b9b2, IF/MAC: eth0/fe:f0:00:00:02:01 (bat0 BATMAN_IV)] - Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... -fe:f1:00:00:03:01 0.170s (255) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (255) -fe:f1:00:00:01:01 0.510s (253) fe:f1:00:00:01:01 [ eth1]: fe:f1:00:00:01:01 (253) -fe:f0:00:00:05:01 0.660s (222) fe:f1:00:00:03:01 [ eth1]: fe:f0:00:00:03:01 (198) fe:f1:00:00:03:01 (222) -fe:f0:00:00:03:01 0.560s (252) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (252) fe:f0:00:00:03:01 (240) -fe:f0:00:00:04:01 0.250s (240) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (240) fe:f0:00:00:03:01 (211) -fe:f0:00:00:01:01 0.850s (255) fe:f1:00:00:01:01 [ eth1]: fe:f1:00:00:01:01 (255) fe:f0:00:00:01:01 (238) -$ batctl originators -i eth1 -[B.A.T.M.A.N. adv master-b82b9b2, IF/MAC: eth1/fe:f1:00:00:02:01 (bat0 BATMAN_IV)] - Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... -fe:f1:00:00:03:01 0.880s (240) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (240) -fe:f1:00:00:01:01 0.250s (239) fe:f1:00:00:01:01 [ eth1]: fe:f1:00:00:01:01 (239) -fe:f0:00:00:05:01 0.340s (211) fe:f1:00:00:03:01 [ eth1]: fe:f0:00:00:03:01 (210) fe:f1:00:00:03:01 (211) -fe:f0:00:00:03:01 0.260s (253) fe:f0:00:00:03:01 [ eth0]: fe:f1:00:00:03:01 (240) fe:f0:00:00:03:01 (253) -fe:f0:00:00:04:01 0.010s (225) fe:f0:00:00:03:01 [ eth0]: fe:f1:00:00:03:01 (224) fe:f0:00:00:03:01 (225) -fe:f0:00:00:01:01 0.510s (255) fe:f0:00:00:01:01 [ eth0]: fe:f1:00:00:01:01 (240) fe:f0:00:00:01:01 (255) - - -batctl interface -================ - -display or modify the interface settings - -Usage: batctl interface|if [add|del iface(s)] - -Example: - -$ batctl interface -eth0: active - -batctl interval -=============== - -display or modify the originator interval in ms - -Usage: batctl orig_interval|it [interval] - -Example: - -$ batctl interval -1000 - -batctl log -========== - -read the log produced by the kernel module - -Usage: batctl log|l - -Example: - -$ batctl log -[ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:01:01 via prev OG: fe:fe:00:00:01:01 seqno 670, tq 245, TTL 49, V 8, IDF 1) -[ 400] Drop packet: originator packet from myself (via neighbour) -[ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:02:01 via prev OG: fe:fe:00:00:02:01 seqno 545, tq 255, TTL 50, V 8, IDF 0) -[ 400] updating last_seqno: old 544, new 545 -[ 400] bidirectional: orig = fe:fe:00:00:02:01 neigh = fe:fe:00:00:02:01 => own_bcast = 64, real recv = 64, local tq: 255, asym_penalty: 255, total tq: 255 -[ 400] update_originator(): Searching and updating originator entry of received packet -[ 400] Updating existing last-hop neighbour of originator -[...] - -batctl loglevel -=============== - -display or modify the log level - -Usage: batctl loglevel|ll [level] - -Example: -$ batctl loglevel -[x] all debug output disabled (none) -[ ] messages related to routing / flooding / broadcasting (batman) -[ ] messages related to route added / changed / deleted (routes) -[ ] messages related to translation table operations (tt) -[ ] messages related to bridge loop avoidance (bla) -[ ] messages related to arp snooping and distributed arp table (dat) -[ ] messages related to network coding (nc) -[ ] messages related to multicast (mcast) - -batctl nc_nodes -=============== - -display the neighbor nodes considered for network coded packets - -Usage: batctl nc_nodes|nn - -Example: - -Node: fe:fe:00:0a:01:01 - Ingoing: fe:fe:00:0a:01:01 fe:fe:00:0a:02:01 - Outgoing: fe:fe:00:0a:01:01 fe:fe:00:0a:02:01 - -Where: -- Node is the neighbor -- Ingoing is the neighbors this neighbor can hear packets from -- Outgoing is the neighbors that can hear packets from this neighbor - -batctl network_coding -===================== - -display or modify the network coding setting - -Usage: batctl network_coding|nc [0|1] - -Note that network coding requires a working promiscuous mode on all interfaces. - -batctl multicast_mode -===================== - -display or modify the multicast mode setting - -Usage: batctl multicast_mode|mm [0|1] - -batctl mcast_flags -================= - -display local and remote multicast flags - -Usage batctl mcast_flags|mf - -Example: - -Multicast flags (own flags: [U46]) -* Bridged [U] U -* No IGMP/MLD Querier [4/6]: ./. -* Shadowing IGMP/MLD Querier [4/6]: 4/6 -------------------------------------------- - Originator Flags -02:04:64:a4:39:c1 [U..] -02:04:64:a4:39:c2 [U..] -02:04:64:a4:39:c3 [...] - -where: -- Originator: the MAC address of the originating (primary interface) - batman-adv node -- Flags: multicast flags of the according node -- U: wants all unsnoopable multicast traffic, meaning other nodes need to always - forward any multicast traffic destined to ff02::1 or 224.0.0.0/24 to it -- 4: wants all IPv4 multicast traffic, meaning other nodes need to always - forward any IPv4 multicast traffic to it -- 6: wants all IPv6 multicast traffic, meaning other nodes need to always - forward any IPv6 multicast traffic to it - -If a node does not have multicast optimizations available (e.g. old batman-adv -version or optimizations not compiled in), therefore not announcing any -multicast tvlv/flags, a '-' will be displayed instead of '[...]'. - -batctl aggregation -================== - -display or modify the packet aggregation setting - -Usage: batctl aggregation|ag [0|1] - -batctl isolation_mark -===================== - -display or modify the isolation mark. -This value is used by Extended Isolation feature. - -Usage: batctl isolation_mark|mark $value[/0x$mask] - -Example 1: batctl mark 0x00000001/0xffffffff -Example 2: batctl mark 0x00040000/0xffff0000 -Example 3: batctl mark 16 -Example 4: batctl mark 0x0f - -batctl translocal -================= - -display the local translation table - -Usage: batctl translocal|tl - -Example: - -$ batctl translocal -Locally retrieved addresses (from bat0) announced via TT (TTVN: 1): - * fe:fe:00:00:01:01 [RPNXW] - -In particular, RPNXW are flags which have the following meanings: - -- R/Roaming: this client moved to another node but it is still kept for - consistency reasons until the next OGM is sent. -- P/noPurge: this client represents the local soft interface and will never - be deleted. -- N/New: this client has recently been added but is not advertised in the - mesh until the next OGM is sent (for consistency reasons). -- X/delete: this client has to be removed for some reason, but it is still - kept for consistency reasons until the next OGM is sent. -- W/Wireless: this client is connected to the node through a wireless - device. - -If any of the flags is not enabled, a '.' will substitute its symbol. - -batctl transglobal -================== - -display the global translation table - -Usage: batctl transglobal|tg - -Example: - -Globally announced TT entries received via the mesh bat0 - Client (TTVN) Originator (Curr TTVN) Flags - * fe:fe:00:00:01:01 ( 12) via fe:fe:00:00:01:02 ( 50) [RXW] - -where: -- TTVN: is the translation-table-version-number which introduced this - client -- Curr TTVN: is the translation-table-version-number currently advertised by - the originator serving this client (different clients - advertised by the same originator have the same Curr TTVN) -- Flags that mean: - - R/Roaming: this client moved to another node but it is still kept - for consistency reasons until the next OGM is sent. - - X/delete: this client has to be removed for some reason, but it is - still kept for consistency reasons until the next - OGM is sent. - - W/Wireless: this client is connected to the node through a - wireless device. - -If any of the flags is not enabled, a '.' will substitute its symbol. - -batctl dat_cache -================= - -display the local D.A.T. cache - -Usage batctl dat_cache|dc - -Example: - -Distributed ARP Table (bat0): - IPv4 MAC last-seen - * 172.100.0.1 b6:9b:d0:ea:b1:13 0:00 - -where: -- IPv4 is the IP address of a client in the mesh network -- MAC is the MAC address associated to that IP -- last-seen is the amount of time since last refresh of this entry - -batctl and network name spaces -============================== - -The batman-adv kernel module is netns aware. Mesh instances can be -created in name spaces, and interfaces in that name space added to the -mesh. The mesh interface cannot be moved between name spaces, as is -typical for virtual interfaces. - -The following example creates two network namespaces, and uses veth -pairs to connect them together into a mesh of three nodes. - -EMU1="ip netns exec emu1" -EMU2="ip netns exec emu2" - -ip netns add emu1 -ip netns add emu2 - -ip link add emu1-veth1 type veth peer name emu2-veth1 -ip link set emu1-veth1 netns emu1 -ip link set emu2-veth1 netns emu2 - -$EMU1 ip link set emu1-veth1 name veth1 -$EMU2 ip link set emu2-veth1 name veth1 - -$EMU1 ip link set veth1 up -$EMU2 ip link set veth1 up - -ip link add emu1-veth2 type veth peer name veth2 -ip link set emu1-veth2 netns emu1 -$EMU1 ip link set emu1-veth2 name veth2 - -$EMU1 ip link set veth2 up -ip link set veth2 up - -$EMU1 batctl if add veth1 -$EMU1 batctl if add veth2 -$EMU1 ip link set bat0 up - -$EMU2 batctl if add veth1 -$EMU2 ip link set bat0 up - -batctl if add veth2 -ip link set bat0 up - -alfred and batadv-vis can also be used with name spaces. In this -example, only netns has been used, so there are no filesystem name -spaces. Hence the unix domain socket used by alfred needs to be given -a unique name per instance. - -($EMU1 alfred -m -i bat0 -u /var/run/emu1-alfred.soc) & -($EMU2 alfred -m -i bat0 -u /var/run/emu2-alfred.soc) & -alfred -m -i bat0 & - -($EMU1 batadv-vis -s -u /var/run/emu1-alfred.soc) & -($EMU2 batadv-vis -s -u /var/run/emu2-alfred.soc) & -batadv-vis -s & diff --git a/README.license b/README.license deleted file mode 100644 index a55d70e..0000000 --- a/README.license +++ /dev/null @@ -1,2 +0,0 @@ -SPDX-License-Identifier: GPL-2.0 -License-Filename: LICENSES/preferred/GPL-2.0 diff --git a/README.rst b/README.rst new file mode 100644 index 0000000..0c301c6 --- /dev/null +++ b/README.rst @@ -0,0 +1,694 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================================== +batctl - B.A.T.M.A.N. advanced control and management tool +========================================================== + +Introduction +============ + +Why do I need batctl ? B.A.T.M.A.N. advanced operates on layer 2 and thus all +hosts participating in the virtual switch are completely transparent for all +protocols above layer 2. Therefore the common diagnosis tools do not work as +expected. To overcome these problems batctl was created. At the moment batctl +contains ping, traceroute, tcpdump and interfaces to the kernel module +settings. + + +How does it work ? +================== + +batctl uses the debugfs/batman_adv/bat0/socket device provided by the B.A.T.M.A.N. +advanced kernel module to inject custom icmp packets into the data flow. That's why +ping and traceroute work almost like their IP based counterparts. Tcpdump was +designed because B.A.T.M.A.N. advanced encapsulates all traffic within batman +packets, so that the normal tcpdump would not recognize the packets. + + +The bat-hosts file +================== + +This file is similar to the /etc/hosts file. You can write one MAC address and +one host name per line. batctl will analyze the file to find the matching MAC +address to your provided host name. Host names are much easier to remember than +MAC addresses. ;) + + +batctl statistics +================= + +The batman-adv kernel module maintains a number of traffic counters which are exported +to user space. With batctl these counters can be easily retrieved. The output may vary +depending on which features have been compiled into the kernel module. For example, if +the distributed arp table (short: dat) wasn't selected as an option at compile time +its counters won't be shown. + +Each module subsystem has its own counters which are indicated by their prefixes: + +mgmt: + mesh protocol counters +tt: + translation table counters +dat: + distributed arp table counters + +All counters without a prefix concern payload (pure user data) traffic. + +Usage:: + + batctl statistics + +Example:: + + $ batctl statistics + tx: 14 + tx_bytes: 1316 + tx_errors: 0 + rx: 14 + rx_bytes: 1316 + forward: 0 + forward_bytes: 0 + mgmt_tx: 18 + mgmt_tx_bytes: 762 + mgmt_rx: 17 + mgmt_rx_bytes: 1020 + tt_request_tx: 0 + tt_request_rx: 0 + tt_response_tx: 0 + tt_response_rx: 0 + tt_roam_adv_tx: 0 + tt_roam_adv_rx: 0 + dat_request_tx: 0 + dat_request_rx: 0 + dat_reply_tx: 1 + dat_reply_rx: 0 + + +batctl translate +================ + +Translates a destination (hostname, IPv4, IPv6, MAC, bat_host-name) to the +originator mac address responsible for it. + +Usage:: + + batctl translate mac|bat-host|host-name|IP-address + +Example:: + + $ batctl translate www.google.de + 02:ca:fe:af:fe:01 + $ batctl translate 02:ca:fe:af:fe:01 + 02:ca:fe:af:fe:01 + $ batctl translate 192.168.1.2 + 02:ca:fe:af:fe:05 + $ batctl translate fe:fe:00:00:09:01 + 02:ca:fe:af:fe:05 + $ batctl translate 2001::1 + 02:ca:fe:af:fe:05 + + +batctl ping +=========== + +Sends a Layer 2 batman-adv ping to check round trip time and connectivity + +Usage:: + + batctl ping [parameters] mac|bat-host|host-name|IP-address + parameters: + -c ping packet count + -h print this help + -i interval in seconds + -t timeout in seconds + -T don't try to translate mac to originator address + -R record route + +Example:: + + $ batctl ping fe:fe:00:00:09:01 + PING fe:fe:00:00:09:01 (fe:fe:00:00:09:01) 19(47) bytes of data + 19 bytes from fe:fe:00:00:09:01 icmp_seq=1 ttl=43 time=8.74 ms + 19 bytes from fe:fe:00:00:09:01 icmp_seq=2 ttl=43 time=7.48 ms + 19 bytes from fe:fe:00:00:09:01 icmp_seq=3 ttl=43 time=8.23 ms + ^C--- fe:fe:00:00:09:01 ping statistics --- + 3 packets transmitted, 3 received, 0% packet loss + rtt min/avg/max/mdev = 7.476/8.151/8.743/1.267 ms + + +batctl traceroute +================= + +Traceroute sends 3 packets to each hop, awaits the answers and prints out the +response times. + +Usage:: + + batctl traceroute [parameters] mac|bat-host|host-name|IP-address + +Example:: + + $ batctl traceroute fe:fe:00:00:09:01 + traceroute to fe:fe:00:00:09:01 (fe:fe:00:00:09:01), 50 hops max, 19 byte packets + 1: fe:fe:00:00:02:01 4.932 ms 2.338 ms 1.333 ms + 2: fe:fe:00:00:03:01 6.860 ms 1.579 ms 1.260 ms + 3: fe:fe:00:00:04:01 2.342 ms 1.547 ms 1.655 ms + 4: fe:fe:00:00:05:01 2.906 ms 2.211 ms 2.253 ms + 5: fe:fe:00:00:06:01 3.577 ms 2.687 ms 3.088 ms + 6: fe:fe:00:00:07:01 4.217 ms 5.741 ms 3.551 ms + 7: fe:fe:00:00:08:01 5.017 ms 5.547 ms 4.294 ms + 8: fe:fe:00:00:09:01 5.730 ms 4.970 ms 6.437 ms + + +batctl tcpdump +============== + +tcpdump layer 2 and/or layer 3 traffic on the given interface + +Usage:: + + batctl tcpdump [parameters] interface [interface] + parameters: + -c compat filter - only display packets matching own compat version (14) + -h print this help + -n don't convert addresses to bat-host names + -p dump specific packet type + -x dump all packet types except specified + packet types: + 1 - batman ogm packets + 2 - batman icmp packets + 4 - batman unicast packets + 8 - batman broadcast packets + 16 - batman unicast tvlv packets + 32 - batman fragmented packets + 64 - batman tt / roaming packets + 128 - non batman packets + 129 - batman ogm & non batman packets + +tcpdump supports standard interfaces as well as raw wifi interfaces running in monitor mode. + +Example output for tcpdump:: + + $ batctl tcpdump mesh0 + 01:51:42.401188 BAT kansas: OGM via neigh kansas, seqno 6718, tq 255, ttl 50, v 9, flags [..I], length 28 + 01:51:42.489735 BAT kansas: OGM via neigh wyoming, seqno 6718, tq 245, ttl 49, v 9, flags [.D.], length 28 + 01:51:42.510330 BAT wyoming: OGM via neigh wyoming, seqno 6721, tq 255, ttl 50, v 9, flags [..I], length 28 + 01:51:42.601092 BAT wyoming: OGM via neigh kansas, seqno 6721, tq 245, ttl 49, v 9, flags [.D.], length 28 + 01:51:43.361076 BAT kansas > wyoming: ICMP echo request, id 0, seq 1, ttl 1, v 9, length 19 + 01:51:43.365347 BAT wyoming > kansas: ICMP echo reply, id 0, seq 1, ttl 50, v 9, length 19 + 01:51:43.372224 BAT kansas > wyoming: ICMP echo request, id 0, seq 2, ttl 1, v 9, length 19 + 01:51:43.376506 BAT wyoming > kansas: ICMP echo reply, id 0, seq 2, ttl 50, v 9, length 19 + 01:51:43.381250 BAT kansas: OGM via neigh kansas, seqno 6719, tq 255, ttl 50, v 9, flags [..I], length 28 + 01:51:43.386281 BAT kansas > wyoming: ICMP echo request, id 0, seq 3, ttl 1, v 9, length 19 + 01:51:43.387910 BAT wyoming > kansas: ICMP echo reply, id 0, seq 3, ttl 50, v 9, length 19 + 01:51:43.479503 BAT kansas: OGM via neigh wyoming, seqno 6719, tq 245, ttl 49, v 9, flags [.D.], length 28 + 01:51:43.509899 BAT wyoming: OGM via neigh wyoming, seqno 6722, tq 255, ttl 50, v 9, flags [..I], length 28 + 01:51:43.600999 BAT wyoming: OGM via neigh kansas, seqno 6722, tq 245, ttl 49, v 9, flags [.D.], length 28 + 01:51:44.381064 BAT kansas: OGM via neigh kansas, seqno 6720, tq 255, ttl 50, v 9, flags [..I], length 28 + + +batctl bisect_iv +================ + +Analyzes the B.A.T.M.A.N. IV logfiles to build a small internal database of all sent sequence +numbers and routing table changes. This database can be used to search for routing loops +(default action), to trace OGMs of a host (use "-t" to specify the mac address or +bat-host name) throughout the network or to display routing tables of the nodes (use "-r" to +specify the mac address or bat-host name). You can name a specific sequence number or a range +using the "-s" option to limit the output's range. Furthermore you can filter the output by +specifying an originator (use "-o" to specify the mac address or bat-host name) to only see +data connected to this originator. If "-n" was given batctl will not replace the mac +addresses with bat-host names in the output. + +Usage:: + + batctl bisect_iv [parameters] <file1> <file2> .. <fileN> + parameters: + + -h print this help + -l run a loop detection of given mac address or bat-host (default) + -n don't convert addresses to bat-host names + -r print routing tables of given mac address or bat-host + -s seqno range to limit the output + -t trace seqnos of given mac address or bat-host + +Examples:: + + $ batctl bisect_iv log/* -l uml3 + Analyzing routing tables of originator: uml3 [all sequence numbers] + + Checking host: uml3 + Path towards uml7 (seqno 9 via neigh uml5): -> uml5 -> uml6 + Path towards uml7 (seqno 10 via neigh uml4): -> uml4 -> uml5 -> uml6 + Path towards uml6 (seqno 4 via neigh uml4): -> uml4 + Path towards uml8 (seqno 12 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 + Path towards uml8 (seqno 203 via neigh uml4): -> uml4 -> uml6 -> uml7 + Path towards uml8 (seqno 391 via neigh uml2): -> uml2 -> uml3 -> uml2 aborted due to loop! + Path towards uml8 (seqno 396 via neigh uml4): -> uml4 -> uml6 -> uml7 + Path towards uml9 (seqno 10 via neigh uml5): -> uml5 -> uml6 -> uml7 -> uml9. + Path towards uml9 (seqno 10 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 -> uml9. + Path towards uml9 (seqno 11 via neigh uml4): -> uml4 -> uml6 -> uml7 -> uml8 -> uml9. + Path towards uml9 (seqno 12 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 -> uml8 -> uml9. + Path towards uml9 (seqno 21 via neigh uml5): -> uml5 -> uml6 -> uml7 -> uml8 -> uml9. + Path towards uml9 (seqno 22 via neigh uml4): -> uml4 -> uml5 -> uml6 -> uml7 -> uml8 -> uml9. + + $ ./batctl bisect_iv -t uml3 log/* + Sequence number flow of originator: uml3 [all sequence numbers] + [...] + +=> uml3 (seqno 19) + |- uml2 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] + | |- uml3 [tq: 154, ttl: 49, neigh: uml2, prev_sender: uml3] + | - uml1 [tq: 154, ttl: 49, neigh: uml2, prev_sender: uml3] + | |- uml3 [tq: 51, ttl: 48, neigh: uml1, prev_sender: uml2] + | - uml2 [tq: 51, ttl: 48, neigh: uml1, prev_sender: uml2] + |- uml5 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] + | |- uml6 [tq: 33, ttl: 48, neigh: uml5, prev_sender: uml3] + | | |- uml5 [tq: 11, ttl: 47, neigh: uml6, prev_sender: uml5] + | | |- uml7 [tq: 11, ttl: 47, neigh: uml6, prev_sender: uml5] + | | | |- uml8 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] + | | | | |- uml6 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] + | | | | |- uml9 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] + | | | | - uml7 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] + | | | |- uml6 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] + | | | |- uml9 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] + | | | - uml5 [tq: 3, ttl: 46, neigh: uml7, prev_sender: uml6] + | | - uml4 [tq: 11, ttl: 47, neigh: uml6, prev_sender: uml5] + | |- uml7 [tq: 33, ttl: 48, neigh: uml5, prev_sender: uml3] + | - uml4 [tq: 33, ttl: 48, neigh: uml5, prev_sender: uml3] + - uml4 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] + |- uml3 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] + |- uml6 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] + |- uml2 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] + - uml5 [tq: 106, ttl: 49, neigh: uml4, prev_sender: uml3] + +=> uml3 (seqno 20) + |- uml2 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] + | |- uml3 [tq: 160, ttl: 49, neigh: uml2, prev_sender: uml3] + | |- uml1 [tq: 160, ttl: 49, neigh: uml2, prev_sender: uml3] + | - uml4 [tq: 160, ttl: 49, neigh: uml2, prev_sender: uml3] + |- uml5 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] + | |- uml3 [tq: 43, ttl: 48, neigh: uml5, prev_sender: uml3] + | |- uml6 [tq: 43, ttl: 48, neigh: uml5, prev_sender: uml3] + | | |- uml8 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] + | | |- uml5 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] + | | |- uml7 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] + | | | |- uml8 [tq: 5, ttl: 46, neigh: uml7, prev_sender: uml6] + | | | | |- uml6 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] + | | | | |- uml9 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] + | | | | - uml7 [tq: 0, ttl: 45, neigh: uml8, prev_sender: uml7] + | | | - uml6 [tq: 5, ttl: 46, neigh: uml7, prev_sender: uml6] + | | - uml4 [tq: 16, ttl: 47, neigh: uml6, prev_sender: uml5] + | - uml4 [tq: 43, ttl: 48, neigh: uml5, prev_sender: uml3] + |- uml1 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] + | - uml2 [tq: 49, ttl: 48, neigh: uml1, prev_sender: uml3] + - uml4 [tq: 255, ttl: 50, neigh: uml3, prev_sender: uml3] + |- uml3 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] + |- uml6 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] + |- uml2 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] + - uml5 [tq: 114, ttl: 49, neigh: uml4, prev_sender: uml3] + [...] + + +batctl originators +================== + +Check the Originators table + +Usage:: + + batctl originators|o + +Example:: + + $ batctl originators + [B.A.T.M.A.N. adv 2011.4.0, MainIF/MAC: eth0/fe:fe:00:00:01:01 (bat0)] + Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... + fe:fe:00:00:08:01 0.820s (194) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 65) fe:fe:00:00:02:01 (194) + fe:fe:00:00:03:01 0.980s (245) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 81) fe:fe:00:00:02:01 (245) + fe:fe:00:00:05:01 0.140s (221) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 76) fe:fe:00:00:02:01 (221) + fe:fe:00:00:04:01 0.010s (235) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:02:01 (235) fe:fe:00:00:03:01 ( 81) + fe:fe:00:00:09:01 0.830s (187) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 63) fe:fe:00:00:02:01 (187) + fe:fe:00:00:06:01 0.830s (213) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 71) fe:fe:00:00:02:01 (213) + fe:fe:00:00:02:01 0.240s (255) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 81) fe:fe:00:00:02:01 (255) + fe:fe:00:00:07:01 0.670s (200) fe:fe:00:00:02:01 [ eth0]: fe:fe:00:00:03:01 ( 68) fe:fe:00:00:02:01 (200) + +Since 2014.1.0, each batman interface has an individual originator table as well which is only used for routing. +These table explain to which neighbor a packet is forwarded when the packet is received on the specified interface. + +Example:: + + $ batctl originators -i eth0 + [B.A.T.M.A.N. adv master-b82b9b2, IF/MAC: eth0/fe:f0:00:00:02:01 (bat0 BATMAN_IV)] + Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... + fe:f1:00:00:03:01 0.170s (255) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (255) + fe:f1:00:00:01:01 0.510s (253) fe:f1:00:00:01:01 [ eth1]: fe:f1:00:00:01:01 (253) + fe:f0:00:00:05:01 0.660s (222) fe:f1:00:00:03:01 [ eth1]: fe:f0:00:00:03:01 (198) fe:f1:00:00:03:01 (222) + fe:f0:00:00:03:01 0.560s (252) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (252) fe:f0:00:00:03:01 (240) + fe:f0:00:00:04:01 0.250s (240) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (240) fe:f0:00:00:03:01 (211) + fe:f0:00:00:01:01 0.850s (255) fe:f1:00:00:01:01 [ eth1]: fe:f1:00:00:01:01 (255) fe:f0:00:00:01:01 (238) + $ batctl originators -i eth1 + [B.A.T.M.A.N. adv master-b82b9b2, IF/MAC: eth1/fe:f1:00:00:02:01 (bat0 BATMAN_IV)] + Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... + fe:f1:00:00:03:01 0.880s (240) fe:f1:00:00:03:01 [ eth1]: fe:f1:00:00:03:01 (240) + fe:f1:00:00:01:01 0.250s (239) fe:f1:00:00:01:01 [ eth1]: fe:f1:00:00:01:01 (239) + fe:f0:00:00:05:01 0.340s (211) fe:f1:00:00:03:01 [ eth1]: fe:f0:00:00:03:01 (210) fe:f1:00:00:03:01 (211) + fe:f0:00:00:03:01 0.260s (253) fe:f0:00:00:03:01 [ eth0]: fe:f1:00:00:03:01 (240) fe:f0:00:00:03:01 (253) + fe:f0:00:00:04:01 0.010s (225) fe:f0:00:00:03:01 [ eth0]: fe:f1:00:00:03:01 (224) fe:f0:00:00:03:01 (225) + fe:f0:00:00:01:01 0.510s (255) fe:f0:00:00:01:01 [ eth0]: fe:f1:00:00:01:01 (240) fe:f0:00:00:01:01 (255) + + +batctl interface +================ + +display or modify the interface settings + +Usage:: + + batctl interface|if [add|del iface(s)] + +Example:: + + $ batctl interface + eth0: active + + +batctl interval +=============== + +display or modify the originator interval in ms + +Usage:: + + batctl orig_interval|it [interval] + +Example:: + + $ batctl interval + 1000 + + +batctl log +========== + +read the log produced by the kernel module + +Usage:: + + batctl log|l + +Example:: + + $ batctl log + [ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:01:01 via prev OG: fe:fe:00:00:01:01 seqno 670, tq 245, TTL 49, V 8, IDF 1) + [ 400] Drop packet: originator packet from myself (via neighbour) + [ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:02:01 via prev OG: fe:fe:00:00:02:01 seqno 545, tq 255, TTL 50, V 8, IDF 0) + [ 400] updating last_seqno: old 544, new 545 + [ 400] bidirectional: orig = fe:fe:00:00:02:01 neigh = fe:fe:00:00:02:01 => own_bcast = 64, real recv = 64, local tq: 255, asym_penalty: 255, total tq: 255 + [ 400] update_originator(): Searching and updating originator entry of received packet + [ 400] Updating existing last-hop neighbour of originator + [...] + + +batctl loglevel +=============== + +display or modify the log level + +Usage:: + + batctl loglevel|ll [level] + +Example:: + + $ batctl loglevel + [x] all debug output disabled (none) + [ ] messages related to routing / flooding / broadcasting (batman) + [ ] messages related to route added / changed / deleted (routes) + [ ] messages related to translation table operations (tt) + [ ] messages related to bridge loop avoidance (bla) + [ ] messages related to arp snooping and distributed arp table (dat) + [ ] messages related to network coding (nc) + [ ] messages related to multicast (mcast) + + +batctl nc_nodes +=============== + +display the neighbor nodes considered for network coded packets + +Usage:: + + batctl nc_nodes|nn + +Example:: + + Node: fe:fe:00:0a:01:01 + Ingoing: fe:fe:00:0a:01:01 fe:fe:00:0a:02:01 + Outgoing: fe:fe:00:0a:01:01 fe:fe:00:0a:02:01 + +Where + +Node: + is the neighbor +Ingoing: + is the neighbors this neighbor can hear packets from +Outgoing: + is the neighbors that can hear packets from this neighbor + + +batctl network_coding +===================== + +display or modify the network coding setting + +Usage:: + + batctl network_coding|nc [0|1] + +Note that network coding requires a working promiscuous mode on all interfaces. + + +batctl multicast_mode +===================== + +display or modify the multicast mode setting + +Usage:: + + batctl multicast_mode|mm [0|1] + + +batctl mcast_flags +================== + +display local and remote multicast flags + +Usage batctl mcast_flags|mf + +Example: + +Multicast flags (own flags: [U46]) +* Bridged [U] U +* No IGMP/MLD Querier [4/6]: ./. +* Shadowing IGMP/MLD Querier [4/6]: 4/6 +------------------------------------------- + Originator Flags +02:04:64:a4:39:c1 [U..] +02:04:64:a4:39:c2 [U..] +02:04:64:a4:39:c3 [...] + +where + +Originator: + the MAC address of the originating (primary interface) batman-adv node +Flags: + multicast flags of the according node +U: + wants all unsnoopable multicast traffic, meaning other nodes need to always + forward any multicast traffic destined to ff02::1 or 224.0.0.0/24 to it +4: + wants all IPv4 multicast traffic, meaning other nodes need to always forward + any IPv4 multicast traffic to it +6: + wants all IPv6 multicast traffic, meaning other nodes need to always forward + any IPv6 multicast traffic to it + +If a node does not have multicast optimizations available (e.g. old batman-adv +version or optimizations not compiled in), therefore not announcing any +multicast tvlv/flags, a '-' will be displayed instead of '[...]'. + + +batctl aggregation +================== + +display or modify the packet aggregation setting + +Usage:: + + batctl aggregation|ag [0|1] + + +batctl isolation_mark +===================== + +display or modify the isolation mark. +This value is used by Extended Isolation feature. + +Usage:: + + batctl isolation_mark|mark $value[/0x$mask] + +* Example 1: ``batctl mark 0x00000001/0xffffffff`` +* Example 2: ``batctl mark 0x00040000/0xffff0000`` +* Example 3: ``batctl mark 16`` +* Example 4: ``batctl mark 0x0f`` + + +batctl translocal +================= + +display the local translation table + +Usage:: + + batctl translocal|tl + +Example:: + + $ batctl translocal + Locally retrieved addresses (from bat0) announced via TT (TTVN: 1): + * fe:fe:00:00:01:01 [RPNXW] + +In particular, RPNXW are flags which have the following meanings: + +R/Roaming: + this client moved to another node but it is still kept for consistency reasons + until the next OGM is sent. +P/noPurge: + this client represents the local soft interface and will never be deleted. +N/New: + this client has recently been added but is not advertised in the mesh until + the next OGM is sent (for consistency reasons). +X/delete: + this client has to be removed for some reason, but it is still kept for + consistency reasons until the next OGM is sent. +W/Wireless: + this client is connected to the node through a wireless device. + +If any of the flags is not enabled, a '.' will substitute its symbol. + + +batctl transglobal +================== + +display the global translation table + +Usage:: + + batctl transglobal|tg + +Example:: + + Globally announced TT entries received via the mesh bat0 + Client (TTVN) Originator (Curr TTVN) Flags + * fe:fe:00:00:01:01 ( 12) via fe:fe:00:00:01:02 ( 50) [RXW] + +where + +TTVN: + is the translation-table-version-number which introduced this client +Curr TTVN: + is the translation-table-version-number currently advertised by the + originator serving this client (different clients advertised by the same + originator have the same Curr TTVN) +Flags that mean: + R/Roaming: + this client moved to another node but it is still kept for consistency + reasons until the next OGM is sent. + X/delete: + this client has to be removed for some reason, but it is still kept for + consistency reasons until the next OGM is sent. + W/Wireless: + this client is connected to the node through a wireless device. + +If any of the flags is not enabled, a '.' will substitute its symbol. + + +batctl dat_cache +================= + +display the local D.A.T. cache + +Usage batctl dat_cache|dc + +Example:: + + Distributed ARP Table (bat0): + IPv4 MAC last-seen + * 172.100.0.1 b6:9b:d0:ea:b1:13 0:00 + +where + +IPv4: + is the IP address of a client in the mesh network +MAC: + is the MAC address associated to that IP +last-seen: + is the amount of time since last refresh of this entry + + +batctl and network name spaces +============================== + +The batman-adv kernel module is netns aware. Mesh instances can be +created in name spaces, and interfaces in that name space added to the +mesh. The mesh interface cannot be moved between name spaces, as is +typical for virtual interfaces. + +The following example creates two network namespaces, and uses veth +pairs to connect them together into a mesh of three nodes:: + + EMU1="ip netns exec emu1" + EMU2="ip netns exec emu2" + + ip netns add emu1 + ip netns add emu2 + + ip link add emu1-veth1 type veth peer name emu2-veth1 + ip link set emu1-veth1 netns emu1 + ip link set emu2-veth1 netns emu2 + + $EMU1 ip link set emu1-veth1 name veth1 + $EMU2 ip link set emu2-veth1 name veth1 + + $EMU1 ip link set veth1 up + $EMU2 ip link set veth1 up + + ip link add emu1-veth2 type veth peer name veth2 + ip link set emu1-veth2 netns emu1 + $EMU1 ip link set emu1-veth2 name veth2 + + $EMU1 ip link set veth2 up + ip link set veth2 up + + $EMU1 batctl if add veth1 + $EMU1 batctl if add veth2 + $EMU1 ip link set bat0 up + + $EMU2 batctl if add veth1 + $EMU2 ip link set bat0 up + + batctl if add veth2 + ip link set bat0 up + +alfred and batadv-vis can also be used with name spaces. In this +example, only netns has been used, so there are no filesystem name +spaces. Hence the unix domain socket used by alfred needs to be given +a unique name per instance:: + + ($EMU1 alfred -m -i bat0 -u /var/run/emu1-alfred.soc) & + ($EMU2 alfred -m -i bat0 -u /var/run/emu2-alfred.soc) & + alfred -m -i bat0 & + + ($EMU1 batadv-vis -s -u /var/run/emu1-alfred.soc) & + ($EMU2 batadv-vis -s -u /var/run/emu2-alfred.soc) & + batadv-vis -s &
On Montag, 20. November 2017 22:02:27 CET Sven Eckelmann wrote:
Hi,
I was talking today with Simon about the "License cleanup" changes. He would prefer when the *.license files don't exist (when possible). Luckily, I already wanted to convert these files (or at least the READMEs) to reStructuredText and I've already shown in these patchsets how the SPDX annotation should be done for the lrest files. So it was just logically to immediately post the conversion to rst and integration of this tag.
We've also discussed how the changelog should look like. It should be simple and we only wanted to show the date (not the time) anymore. And the actual changelog lists should be kept (mostly untouched - beside some minor format fixes to make it reStructuredText compatible).
This patchset is based on the "batctl: License cleanup" patchset.
[...]
Applied in cfaec23..a5027a0 but without the *.license parts.
Kind regards, Sven
b.a.t.m.a.n@lists.open-mesh.org
-
Sven Eckelmann