Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS capable mesh software which targets Atheros AP51 devices such as Meraki Mini or Fonera.
As soon as flashed, mini-routers act as mesh-network appliances: all you need is power-on the devices and connect almost one of these to a xDSL DHCP capable router; users in the mesh cloud can associate with mesh nodes APs (open and WPA-PSK protected ones) and start browsing. ROBIN comes also with a precofigured NoDogSplash release offering firewalling and throttling.
If you want test the ROBIN download it (images and docs) from: http://sourceforge.net/projects/ponte2/ the tarball contains the kernel (vmlinux.gz .lzma) and the root filesystem (jffs2-64k) needed for flashing Meraki Mini and Fonera.
Many thanks to all for suggestions, reports and bug divering!
-- Antonio a.anselmi(at)oltrelinux(dot)com www.blogin.it
Hi, all. Hi, Antonio.
I've made up two ROBIN nodes on LaFoneras. They works quite well.
---node.A as gateway--- root@OpenWrt:~# /sbin/brn -h usage /sbin/brn -a : shows batmand -d 1 -b : shows neighbors -d : shows non-direct neighbors -g : shows: OGs using NBs with non-direct GWs -v : shows all -l : loop every 2 seconds -h : shows help
root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~# -------------------------
---node.B as node------ root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~# -------------------------
ROBIN is so 0-config that I can't understand how it woks. :-)
regards,
zukky
P.S. Antonio, your documents are so nice.
Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS capable mesh software which targets Atheros AP51 devices such as Meraki Mini or Fonera.
Ive allready got a 5Node fonera robin mesh and 8others are waiting to be installed; first a vis-server;and the most recent updates
2007/8/24, Lemonde zukky@bb.banban.jp:
Hi, all. Hi, Antonio.
I've made up two ROBIN nodes on LaFoneras. They works quite well.
---node.A as gateway--- root@OpenWrt:~# /sbin/brn -h usage /sbin/brn -a : shows batmand -d 1 -b : shows neighbors -d : shows non-direct neighbors -g : shows: OGs using NBs with non-direct GWs -v : shows all -l : loop every 2 seconds -h : shows help
root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
---node.B as node------ root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
ROBIN is so 0-config that I can't understand how it woks. :-)
regards,
zukky
P.S. Antonio, your documents are so nice.
Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS capable mesh software which targets Atheros AP51 devices such as Meraki Mini or Fonera.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
I tried ROBIN on the Meraki nodes i have,must say it really looks promising. Truly 0-config without the need of a central server this is plug-n play :)
I was wondering why dont you use the same essid as ROBIN instead of the ROBIN_mac/ip. This would make a mesh repeater network and would completely emulate meraki.
Thanks and Regards, Vinay
On 8/24/07, Steven Leeman steven@leeman.be wrote:
Ive allready got a 5Node fonera robin mesh and 8others are waiting to be installed; first a vis-server;and the most recent updates
2007/8/24, Lemonde zukky@bb.banban.jp:
Hi, all. Hi, Antonio.
I've made up two ROBIN nodes on LaFoneras. They works quite well.
---node.A as gateway--- root@OpenWrt:~# /sbin/brn -h usage /sbin/brn -a : shows batmand -d 1 -b : shows neighbors -d : shows non-direct neighbors -g : shows: OGs using NBs with non-direct GWs -v : shows all -l : loop every 2 seconds -h : shows help
root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
---node.B as node------ root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
ROBIN is so 0-config that I can't understand how it woks. :-)
regards,
zukky
P.S. Antonio, your documents are so nice.
Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS capable
mesh
software which targets Atheros AP51 devices such as Meraki Mini or
Fonera.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
The ESSID ROBIN_mac/ip is only for the public hotspotting, ROBIN works on pseudo-IBSS mode (adhemo) without beacons (invisible), so mesh ESSID is not necessary.
-- Antonio
I tried ROBIN on the Meraki nodes i have,must say it really looks promising. Truly 0-config without the need of a central server this is plug-n play :)
I was wondering why dont you use the same essid as ROBIN instead of the ROBIN_mac/ip. This would make a mesh repeater network and would completely emulate meraki.
Thanks and Regards, Vinay
On 8/24/07, Steven Leeman steven@leeman.be wrote:
Ive allready got a 5Node fonera robin mesh and 8others are waiting to be installed; first a vis-server;and the most recent updates
2007/8/24, Lemonde zukky@bb.banban.jp:
Hi, all. Hi, Antonio.
I've made up two ROBIN nodes on LaFoneras. They works quite well.
---node.A as gateway--- root@OpenWrt:~# /sbin/brn -h usage /sbin/brn -a : shows batmand -d 1 -b : shows neighbors -d : shows non-direct neighbors -g : shows: OGs using NBs with non-direct GWs -v : shows all -l : loop every 2 seconds -h : shows help
root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
---node.B as node------ root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
ROBIN is so 0-config that I can't understand how it woks. :-)
regards,
zukky
P.S. Antonio, your documents are so nice.
Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS
capable mesh
software which targets Atheros AP51 devices such as Meraki Mini or
Fonera.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
-- Vinay Menon _______________________________________________ B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
Antonio,
OK. Is it OK with you if I md5 the password for ath2 / ssh?
Will you be setting the passwd for ssh using it in this build?
Mike
-----Original Message----- From: b.a.t.m.a.n-bounces@open-mesh.net [mailto:b.a.t.m.a.n-bounces@open-mesh.net] On Behalf Of a.anselmi@oltrelinux.com Sent: Friday, August 24, 2007 1:22 PM To: The list for a Better Approach To Mobile Ad-hoc Networking Subject: Re: [B.A.T.M.A.N.] robin
The ESSID ROBIN_mac/ip is only for the public hotspotting, ROBIN works on pseudo-IBSS mode (adhemo) without beacons (invisible), so mesh ESSID is not necessary.
-- Antonio
I tried ROBIN on the Meraki nodes i have,must say it really looks promising. Truly 0-config without the need of a central server this is plug-n
play :)
I was wondering why dont you use the same essid as ROBIN instead of
the
ROBIN_mac/ip. This would make a mesh repeater network and would completely emulate meraki.
Thanks and Regards, Vinay
On 8/24/07, Steven Leeman steven@leeman.be wrote:
Ive allready got a 5Node fonera robin mesh and 8others are waiting
to
be installed; first a vis-server;and the most recent updates
2007/8/24, Lemonde zukky@bb.banban.jp:
Hi, all. Hi, Antonio.
I've made up two ROBIN nodes on LaFoneras. They works quite well.
---node.A as gateway--- root@OpenWrt:~# /sbin/brn -h usage /sbin/brn -a : shows batmand -d 1 -b : shows neighbors -d : shows non-direct neighbors -g : shows: OGs using NBs with non-direct GWs -v : shows all -l : loop every 2 seconds -h : shows help
root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
---node.B as node------ root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
ROBIN is so 0-config that I can't understand how it woks. :-)
regards,
zukky
P.S. Antonio, your documents are so nice.
Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS
capable mesh
software which targets Atheros AP51 devices such as Meraki Mini
or
Fonera.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
-- Vinay Menon _______________________________________________ B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
_______________________________________________ B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
so people are flashing the meraki because they don't want to work with the central server dashboard.Meraki.com ?
2007/8/24, Vinay Menon vinaymenon@gmail.com:
I tried ROBIN on the Meraki nodes i have,must say it really looks promising. Truly 0-config without the need of a central server this is plug-n play :)
I was wondering why dont you use the same essid as ROBIN instead of the ROBIN_mac/ip. This would make a mesh repeater network and would completely emulate meraki.
Thanks and Regards, Vinay
On 8/24/07, Steven Leeman steven@leeman.be wrote:
Ive allready got a 5Node fonera robin mesh and 8others are waiting to be installed; first a vis-server;and the most recent updates
2007/8/24, Lemonde <zukky@bb.banban.jp >:
Hi, all. Hi, Antonio.
I've made up two ROBIN nodes on LaFoneras. They works quite well.
---node.A as gateway--- root@OpenWrt:~# /sbin/brn -h usage /sbin/brn -a : shows batmand -d 1 -b : shows neighbors -d : shows non-direct neighbors -g : shows: OGs using NBs with non-direct GWs -v : shows all -l : loop every 2 seconds -h : shows help
root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
---node.B as node------ root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
ROBIN is so 0-config that I can't understand how it woks. :-)
regards,
zukky
P.S. Antonio, your documents are so nice.
Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS
capable mesh
software which targets Atheros AP51 devices such as Meraki Mini or
Fonera.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
-- Vinay Menon _______________________________________________ B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
so people are flashing the meraki because they don't want to work with the central server dashboard.Meraki.com ?
Not only. So that, we are writing a server side php interface that will replace a visualization server and will rely on Meraki dashborad adding some views taken from nodogsplash daemon... I think it will be ready for public tests within a couple of weeks.
The other reason was that I think is better starting from scratch with a totally open, clear and clean root filesystem like kamikaze: I colud build the needed image with only and only what I want and skilled users can upgrade adding any desired package.
...personally not any flames against Meraki dashboard !
-- Antonio
2007/8/24, Vinay Menon vinaymenon@gmail.com:
I tried ROBIN on the Meraki nodes i have,must say it really looks promising. Truly 0-config without the need of a central server this is plug-n play :)
I was wondering why dont you use the same essid as ROBIN instead of the ROBIN_mac/ip. This would make a mesh repeater network and would completely emulate meraki.
Thanks and Regards, Vinay
On 8/24/07, Steven Leeman steven@leeman.be wrote:
Ive allready got a 5Node fonera robin mesh and 8others are waiting to be installed; first a vis-server;and the most recent updates
2007/8/24, Lemonde <zukky@bb.banban.jp >:
Hi, all. Hi, Antonio.
I've made up two ROBIN nodes on LaFoneras. They works quite well.
---node.A as gateway--- root@OpenWrt:~# /sbin/brn -h usage /sbin/brn -a : shows batmand -d 1 -b : shows neighbors -d : shows non-direct neighbors -g : shows: OGs using NBs with non-direct GWs -v : shows all -l : loop every 2 seconds -h : shows help
root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs: 6.16.66.32 6.16.66.32 (128): 6.16.66.32 (128) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
---node.B as node------ root@OpenWrt:~# /sbin/brn -v All Originators: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs: 6.16.62.172 6.16.62.172 (126): 6.16.62.172 (126) NBs with non-direct GWs: OGs using NBs with non-direct GWs: root@OpenWrt:~#
ROBIN is so 0-config that I can't understand how it woks. :-)
regards,
zukky
P.S. Antonio, your documents are so nice.
Hi,
I'm using BATMAN routing algorithm on an kamikaze based firwmare, realizing ROBIN (Routing Batman Inside) MESH: a 0-config, QoS
capable mesh
software which targets Atheros AP51 devices such as Meraki Mini or
Fonera.
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
-- Vinay Menon _______________________________________________ B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
B.A.T.M.A.N mailing list B.A.T.M.A.N@open-mesh.net https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
b.a.t.m.a.n@lists.open-mesh.org
-
a.anselmi＠oltrelinux.com -
Lemonde -
Michael Burmeister-Brown -
Steven Leeman -
Vinay Menon