From: Antonio Quartulli <antonio(a)open-mesh.com> This change allows nodes to handle the TT table on a per-VLAN basis. This is needed because nodes may have to store only some of the global entries advertised by another node. In this scenario such nodes would re-create only a partial global table and would not be able to compute a correct CRC anymore. This patch splits the logic and introduces one CRC per VLAN. In this way a node fetching only some entries belonging to some VLANs is still able to compute the needed CRCs and still check the table correctness. With this patch the shape of the TVLV-TT is changed too because now a node needs to advertise all the CRCs of all the VLANs that it is wired to. The debug output of the local Translation Table now shows the CRC along with each entry since there is not a common value for the entire table anymore. Signed-off-by: Antonio Quartulli <antonio(a)open-mesh.com> --- packet.h | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/packet.h b/packet.h index 08e175a..f4bbb05 100644 --- a/packet.h +++ b/packet.h @@ -391,14 +391,26 @@ struct batadv_tvlv_gateway_data { * struct batadv_tvlv_tt_data - tt data propagated through the tt tvlv container * @flags: translation table flags (see batadv_tt_data_flags) * @ttvn: translation table version number - * @reserved: field reserved for future use - * @crc: crc32 checksum of the local translation table + * @vlan_num: number of announced VLANs. In the TVLV this struct is followed by + * one batadv_tvlv_tt_vlan_data object per announced vlan */ struct batadv_tvlv_tt_data { uint8_t flags; uint8_t ttvn; + __be16 num_vlan; +}; + +/** + * struct batadv_tvlv_tt_vlan_data - vlan specific tt data propagated through + * the tt tvlv container + * @crc: crc32 checksum of the entries belonging to this vlan + * @vid: vlan identifier + * @reserved: unused, useful for alignment purposes + */ +struct batadv_tvlv_tt_vlan_data { + __be32 crc; + __be16 vid; uint16_t reserved; - __be32 crc; }; /** -- 1.8.1.5