Hi,
I have two Asus wl500gp router, each with atheros(Atheros 5212) wlancards, running kamikaze 7.06; kernel ver.:2.6.19.2. and B.A.T.M.A.N. 0.2 rv451 (compability version 3) one of them has access to the internet. The one who has no internet connection, doesn't set a default route to the one who has. It only sets this routes:
it looks quite good so far. Blocked TCP is the most obvious reason that the tun device does not appear. the client tries to establish a TCP control channel (port 1967) to the gateway. If that connection attempt is ignored no default route will be set.
Regards, Marek
Hello,
thanks for replying so fast. Unfortunately the reason isn't the blocked tcp-port, I tested it after I shutdown the firewall on each node with the same result as you can see above. Is there something else I can do?
Best regards
Anton
Hi,
thanks for replying so fast. Unfortunately the reason isn't the blocked tcp-port, I tested it after I shutdown the firewall on each node with the same result as you can see above. Is there something else I can do?
Sure. You can debug this by using tcpdump. Use the following call to see the batman TCP and UDP gateway connections: tcpdump -ni <your_wifi_dev> port 1967 Best would be to send it to me, so that I can say a few words about your problem. :-)
Regards, Marek
b.a.t.m.a.n@lists.open-mesh.org
-
Anton Gillert -
Marek Lindner