17 Feb
2008
17 Feb
'08
8:48 p.m.
Hi Axel,
when I use rv980 and call "kill -STOP $(pidof tincd)" then batman works
for a while (1-2 minutes) and exists with the following error:
[ 411413] Error - can't send udp packet: Resource temporarily unavailable.
Connection terminated by remote host
When I restart batmand when tincd is still stopped, the OGM are processed and
I see the neighbour nodes until I get the same error after about 1-2 minutes.
good news, it does not block.
Because of the error message I have inserted at posix/posix.c: 705 "return 0"
(send_udp_packet()).
I have tested two wrt54gl that had the problems before with the rev980 and
the "return 0" statement. Both routers has be running for 18 hours when
tincd was running without creating a connection.
After that I called "kill -STOP $(pidof tincd)" on both routers. Both routers
running now since 13 hours without problems.
Please check and insert the "return 0" at posix/posix:705 if it is the right
solution.
Have a nice week
/Stephan
Zitat von Axel Neumann <axel(a)open-mesh.net>et>:
Hi Stephan,
can you check if rv980 solves the problem ?
ciao,
axel
On Donnerstag 14 Februar 2008, Freifunk Dresden wrote:
Hi Axel,
I have done some checks. First I have added the tincd tap interface to
a bridge and used the bridge as parameter for batmand. This is currently
running since 10h.
The second what I have tried is to call "kill -STOP $(pidof tincd)".
On the WRT54GL batmand stopped quite fast, but it stopped also fast without
the "kill". On the WRT54SL where I never have seen batmand stopping, the
"kill" has stopped batmand after 5-10 minutes. I could reproduce this
serveral times with the GS.
When calling batmand -c -a 120.56.56.56/32 I get the following output on
batmand -cd3:
[ 275531] Unix socket: got connection
[ 275539] got request: 10
[ 275540] Unix socket: Requesting adding of HNA 120.56.56.34/32 -
put this on todo list...
[ 275544] got request: 10
[ 275545] Unix client closed connection ...
Three batmand processes are running and batmand -c returns:
WARNING: You are using BatMan-eXp 0.3-alpha (compatibility version 10) !
/sbin/batmand [not-all-options-displayed] -r 2 -a 10.12.10.16/28 eth1 tbb
After calling "killall batmand" only one of three batmand processes is
killed. I have to killall -9 to get rid of it.
Regards
/Stephan
_______________________________________________
B.A.T.M.A.N mailing list
B.A.T.M.A.N(a)open-mesh.net
https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
_______________________________________________
B.A.T.M.A.N mailing list
B.A.T.M.A.N(a)open-mesh.net
https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
25 Feb
25 Feb
11 a.m.
New subject: [B.A.T.M.A.N.] Rev 972: batmand -c -d n hangs sometimes
Hi Stephan,
thanks for that hint. I changed that lines with rv982 and also made
the --resist-blocked-send switch the default behavior now. I also believe
that terminating the daemon due to any temporary unavailable device or
blocked port is too paranoid.
This should also help with other previously reported problems like
"[B.A.T.M.A.N.] strange batman aborting" indicated by Jan
ciao,
axel
On Sonntag 17 Februar 2008, Freifunk Dresden wrote:
Hi Axel,
when I use rv980 and call "kill -STOP $(pidof tincd)" then batman works
for a while (1-2 minutes) and exists with the following error:
[ 411413] Error - can't send udp packet: Resource temporarily
unavailable. Connection terminated by remote host
When I restart batmand when tincd is still stopped, the OGM are processed
and I see the neighbour nodes until I get the same error after about 1-2
minutes. good news, it does not block.
Because of the error message I have inserted at posix/posix.c: 705 "return
0" (send_udp_packet()).
I have tested two wrt54gl that had the problems before with the rev980 and
the "return 0" statement. Both routers has be running for 18 hours when
tincd was running without creating a connection.
After that I called "kill -STOP $(pidof tincd)" on both routers. Both
routers running now since 13 hours without problems.
Please check and insert the "return 0" at posix/posix:705 if it is the
right solution.
Have a nice week
/Stephan
Zitat von Axel Neumann <axel(a)open-mesh.net>et>:
Hi Stephan,
can you check if rv980 solves the problem ?
ciao,
axel
On Donnerstag 14 Februar 2008, Freifunk Dresden wrote:
_______________________________________________
B.A.T.M.A.N mailing list
B.A.T.M.A.N(a)open-mesh.net
https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n Hi Axel,
I have done some checks. First I have added the tincd tap interface to
a bridge and used the bridge as parameter for batmand. This is currently
running since 10h.
The second what I have tried is to call "kill -STOP $(pidof tincd)".
On the WRT54GL batmand stopped quite fast, but it stopped also fast
without the "kill". On the WRT54SL where I never have seen batmand
stopping, the "kill" has stopped batmand after 5-10 minutes. I could
reproduce this serveral times with the GS.
When calling batmand -c -a 120.56.56.56/32 I get the following output on
batmand -cd3:
[ 275531] Unix socket: got connection
[ 275539] got request: 10
[ 275540] Unix socket: Requesting adding of HNA 120.56.56.34/32 -
put this on todo list...
[ 275544] got request: 10
[ 275545] Unix client closed connection ...
Three batmand processes are running and batmand -c returns:
WARNING: You are using BatMan-eXp 0.3-alpha (compatibility version 10) !
/sbin/batmand [not-all-options-displayed] -r 2 -a 10.12.10.16/28 eth1
tbb
After calling "killall batmand" only one of three batmand processes is
killed. I have to killall -9 to get rid of it.
Regards
/Stephan
_______________________________________________
B.A.T.M.A.N mailing list
B.A.T.M.A.N(a)open-mesh.net
https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
_______________________________________________
B.A.T.M.A.N mailing list
B.A.T.M.A.N(a)open-mesh.net
https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
5577
days inactive
5585
days old
b.a.t.m.a.n@lists.open-mesh.org
1 comments
2 participants
participants (2)
-
Axel Neumann -
Freifunk Dresden