From: Martin Weinelt martin@linuxlounge.net

batadv_dat_put_dhcp is creating a new ARP packet via batadv_dat_arp_create_reply and tries to forward it via batadv_dat_send_data to different peers in the DHT. The original skb is not consumed by batadv_dat_send_data and thus has to be consumed by the caller.

Fixes: b61ec31c8575 ("batman-adv: Snoop DHCPACKs for DAT") Signed-off-by: Martin Weinelt martin@linuxlounge.net [sven@narfation.org: add commit message] Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- net/batman-adv/distributed-arp-table.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 899ab051ffce..310a4f353008 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -1711,6 +1711,8 @@ static void batadv_dat_put_dhcp(struct batadv_priv *bat_priv, u8 *chaddr, batadv_dat_send_data(bat_priv, skb, yiaddr, vid, BATADV_P_DAT_DHT_PUT); batadv_dat_send_data(bat_priv, skb, ip_dst, vid, BATADV_P_DAT_DHT_PUT);

+ consume_skb(skb); + batadv_dbg(BATADV_DBG_DAT, bat_priv, "Snooped from outgoing DHCPACK (server address): %pI4, %pM (vid: %i)\n", &ip_dst, hw_dst, batadv_print_vid(vid));

From: Sven Eckelmann sven@narfation.org

The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks") intoduced a mechanism to run specific code for doit hooks before/after the hooks are run. Since all doit hooks are requiring the batadv softif, it should be retrieved/freed in these helpers to simplify the code.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- net/batman-adv/netlink.c | 143 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 100 insertions(+), 43 deletions(-)

diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 5fe833cc9507..e56c40d1bfe0 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -20,8 +20,10 @@ #include "main.h"

#include <linux/atomic.h> +#include <linux/bitops.h> #include <linux/byteorder/generic.h> #include <linux/cache.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/export.h> #include <linux/genetlink.h> @@ -54,6 +56,8 @@ #include "tp_meter.h" #include "translation-table.h"

+struct net; + struct genl_family batadv_netlink_family;

/* multicast groups */ @@ -61,6 +65,18 @@ enum batadv_netlink_multicast_groups { BATADV_NL_MCGRP_TPMETER, };

+/** + * enum batadv_genl_ops_flags - flags for genl_ops's internal_flags + */ +enum batadv_genl_ops_flags { + /** + * @BATADV_FLAG_NEED_MESH: request requires valid soft interface in + * attribute BATADV_ATTR_MESH_IFINDEX and expects a pointer to it to be + * saved in info->user_ptr[0] + */ + BATADV_FLAG_NEED_MESH = BIT(0), +}; + static const struct genl_multicast_group batadv_netlink_mcgrps[] = { [BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER }, }; @@ -329,40 +345,24 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst, static int batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct batadv_priv *bat_priv; + struct batadv_priv *bat_priv = info->user_ptr[0]; struct sk_buff *msg = NULL; u32 test_length; void *msg_head; - int ifindex; u32 cookie; u8 *dst; int ret;

- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS]) return -EINVAL;

if (!info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]) return -EINVAL;

- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; - dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);

test_length = nla_get_u32(info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]);

- soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; - } - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!msg) { ret = -ENOMEM; @@ -377,15 +377,11 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) goto out; }

- bat_priv = netdev_priv(soft_iface); batadv_tp_start(bat_priv, dst, test_length, &cookie);

ret = batadv_netlink_tp_meter_put(msg, cookie);

out: - if (soft_iface) - dev_put(soft_iface); - if (ret) { if (msg) nlmsg_free(msg); @@ -406,38 +402,17 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) static int batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct batadv_priv *bat_priv; - int ifindex; + struct batadv_priv *bat_priv = info->user_ptr[0]; u8 *dst; int ret = 0;

- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS]) return -EINVAL;

- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; - dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);

- soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; - } - - bat_priv = netdev_priv(soft_iface); batadv_tp_stop(bat_priv, dst, BATADV_TP_REASON_CANCEL);

-out: - if (soft_iface) - dev_put(soft_iface); - return ret; }

@@ -545,6 +520,84 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) return msg->len; }

+/** + * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to soft interface (with increased refcnt) on success, error + * pointer on error + */ +static struct net_device * +batadv_get_softif_from_info(struct net *net, struct genl_info *info) +{ + struct net_device *soft_iface; + int ifindex; + + if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) + return ERR_PTR(-EINVAL); + + ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); + + soft_iface = dev_get_by_index(net, ifindex); + if (!soft_iface) + return ERR_PTR(-ENODEV); + + if (!batadv_softif_is_valid(soft_iface)) + goto err_put_softif; + + return soft_iface; + +err_put_softif: + dev_put(soft_iface); + + return ERR_PTR(-EINVAL); +} + +/** + * batadv_pre_doit() - Prepare batman-adv genl doit request + * @ops: requested netlink operation + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info) +{ + struct net *net = genl_info_net(info); + struct net_device *soft_iface; + struct batadv_priv *bat_priv; + + if (ops->internal_flags & BATADV_FLAG_NEED_MESH) { + soft_iface = batadv_get_softif_from_info(net, info); + if (IS_ERR(soft_iface)) + return PTR_ERR(soft_iface); + + bat_priv = netdev_priv(soft_iface); + info->user_ptr[0] = bat_priv; + } + + return 0; +} + +/** + * batadv_post_doit() - End batman-adv genl doit request + * @ops: requested netlink operation + * @skb: Netlink message with request data + * @info: receiver information + */ +static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_priv *bat_priv; + + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { + bat_priv = info->user_ptr[0]; + dev_put(bat_priv->soft_iface); + } +} + static const struct genl_ops batadv_netlink_ops[] = { { .cmd = BATADV_CMD_GET_MESH_INFO, @@ -557,12 +610,14 @@ static const struct genl_ops batadv_netlink_ops[] = { .flags = GENL_ADMIN_PERM, .policy = batadv_netlink_policy, .doit = batadv_netlink_tp_meter_start, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_TP_METER_CANCEL, .flags = GENL_ADMIN_PERM, .policy = batadv_netlink_policy, .doit = batadv_netlink_tp_meter_cancel, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_GET_ROUTING_ALGOS, @@ -639,6 +694,8 @@ struct genl_family batadv_netlink_family __ro_after_init = { .version = 1, .maxattr = BATADV_ATTR_MAX, .netnsok = true, + .pre_doit = batadv_pre_doit, + .post_doit = batadv_post_doit, .module = THIS_MODULE, .ops = batadv_netlink_ops, .n_ops = ARRAY_SIZE(batadv_netlink_ops),

From: Sven Eckelmann sven@narfation.org

The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested.

Beside the mesh/soft-interface specific configuration, the slave/hard-interface have B.A.T.M.A.N. V specific configuration settings. The genl interface reflects this by allowing to get/set it using the hard-interface specific commands.

The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is reused as get command because it already allow sto dump the content of other information from the slave/hard-interface which are not yet configuration specific.

The set command BATADV_CMD_SET_HARDIF will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF command message type that settings might have been changed and what the current values are.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 16 ++- net/batman-adv/netlink.c | 240 ++++++++++++++++++++++++++++++++++++---- 2 files changed, 233 insertions(+), 23 deletions(-)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index b3394aac9a88..62456a087ef6 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -398,9 +398,15 @@ enum batadv_nl_commands { BATADV_CMD_GET_ROUTING_ALGOS,

/** - * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces + * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the + * current softif */ - BATADV_CMD_GET_HARDIFS, + BATADV_CMD_GET_HARDIF, + + /** + * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF + */ + BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,

/** * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations @@ -453,6 +459,12 @@ enum batadv_nl_commands { */ BATADV_CMD_SET_MESH,

+ /** + * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the + * current softif + */ + BATADV_CMD_SET_HARDIF, + /* add new commands above here */

/** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 179cc7cfcb70..a184e4225fb5 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -21,6 +21,7 @@

#include <linux/atomic.h> #include <linux/bitops.h> +#include <linux/bug.h> #include <linux/byteorder/generic.h> #include <linux/cache.h> #include <linux/err.h> @@ -76,6 +77,13 @@ enum batadv_genl_ops_flags { * saved in info->user_ptr[0] */ BATADV_FLAG_NEED_MESH = BIT(0), + + /** + * @BATADV_FLAG_NEED_HARDIF: request requires valid hard interface in + * attribute BATADV_ATTR_HARD_IFINDEX and expects a pointer to it to be + * saved in info->user_ptr[1] + */ + BATADV_FLAG_NEED_HARDIF = BIT(1), };

static const struct genl_multicast_group batadv_netlink_mcgrps[] = { @@ -446,29 +454,38 @@ batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info) }

/** - * batadv_netlink_dump_hardif_entry() - Dump one hard interface into a message + * batadv_netlink_hardif_fill() - Fill message with hardif attributes * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @hard_iface: hard interface which was modified + * @cmd: type of message to generate * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message * @cb: Control block containing additional options - * @hard_iface: Hard interface to dump * - * Return: error code, or 0 on success + * Return: 0 on success or negative error number in case of failure */ -static int -batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid, - struct netlink_callback *cb, - struct batadv_hard_iface *hard_iface) +static int batadv_netlink_hardif_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags, + struct netlink_callback *cb) { struct net_device *net_dev = hard_iface->net_dev; void *hdr;

- hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq, - &batadv_netlink_family, NLM_F_MULTI, - BATADV_CMD_GET_HARDIFS); + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); if (!hdr) - return -EMSGSIZE; + return -ENOBUFS; + + if (cb) + genl_dump_check_consistent(cb, hdr);

- genl_dump_check_consistent(cb, hdr); + if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX, + bat_priv->soft_iface->ifindex)) + goto nla_put_failure;

if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, net_dev->ifindex) || @@ -486,24 +503,107 @@ batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid, genlmsg_end(msg, hdr); return 0;

- nla_put_failure: +nla_put_failure: genlmsg_cancel(msg, hdr); return -EMSGSIZE; }

/** - * batadv_netlink_dump_hardifs() - Dump all hard interface into a messages + * batadv_netlink_notify_hardif() - send hardif attributes to listener + * @bat_priv: the bat priv with all the soft interface information + * @hard_iface: hard interface which was modified + * + * Return: 0 on success, < 0 on error + */ +static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface) +{ + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_SET_HARDIF, 0, 0, 0, NULL); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); + + return 0; +} + +/** + * batadv_netlink_get_hardif() - Get hardif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_hardif(struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_GET_HARDIF, + info->snd_portid, info->snd_seq, 0, + NULL); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_hardif() - Set hardif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_hardif(struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_hardif(bat_priv, hard_iface); + + return 0; +} + +/** + * batadv_netlink_dump_hardif() - Dump all hard interface into a messages * @msg: Netlink message to dump into * @cb: Parameters from query * * Return: error code, or length of reply message on success */ static int -batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) +batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb) { struct net *net = sock_net(cb->skb->sk); struct net_device *soft_iface; struct batadv_hard_iface *hard_iface; + struct batadv_priv *bat_priv; int ifindex; int portid = NETLINK_CB(cb->skb).portid; int skip = cb->args[0]; @@ -523,6 +623,8 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) return -ENODEV; }

+ bat_priv = netdev_priv(soft_iface); + rtnl_lock(); cb->seq = batadv_hardif_generation << 1 | 1;

@@ -533,8 +635,10 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) if (i++ < skip) continue;

- if (batadv_netlink_dump_hardif_entry(msg, portid, cb, - hard_iface)) { + if (batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_GET_HARDIF, + portid, cb->nlh->nlmsg_seq, + NLM_F_MULTI, cb)) { i--; break; } @@ -584,6 +688,52 @@ batadv_get_softif_from_info(struct net *net, struct genl_info *info) }

/** + * batadv_get_hardif_from_info() - Retrieve hardif from genl attributes + * @bat_priv: the bat priv with all the soft interface information + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to hard interface (with increased refcnt) on success, error + * pointer on error + */ +static struct batadv_hard_iface * +batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface; + struct net_device *hard_dev; + unsigned int hardif_index; + + if (!info->attrs[BATADV_ATTR_HARD_IFINDEX]) + return ERR_PTR(-EINVAL); + + hardif_index = nla_get_u32(info->attrs[BATADV_ATTR_HARD_IFINDEX]); + + hard_dev = dev_get_by_index(net, hardif_index); + if (!hard_dev) + return ERR_PTR(-ENODEV); + + hard_iface = batadv_hardif_get_by_netdev(hard_dev); + if (!hard_iface) + goto err_put_harddev; + + if (hard_iface->soft_iface != bat_priv->soft_iface) + goto err_put_hardif; + + /* hard_dev is referenced by hard_iface and not needed here */ + dev_put(hard_dev); + + return hard_iface; + +err_put_hardif: + batadv_hardif_put(hard_iface); +err_put_harddev: + dev_put(hard_dev); + + return ERR_PTR(-EINVAL); +} + +/** * batadv_pre_doit() - Prepare batman-adv genl doit request * @ops: requested netlink operation * @skb: Netlink message with request data @@ -595,8 +745,21 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { struct net *net = genl_info_net(info); + struct batadv_hard_iface *hard_iface; + struct batadv_priv *bat_priv = NULL; struct net_device *soft_iface; - struct batadv_priv *bat_priv; + u8 user_ptr1_flags; + u8 mesh_dep_flags; + int ret; + + user_ptr1_flags = BATADV_FLAG_NEED_HARDIF; + if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1)) + return -EINVAL; + + mesh_dep_flags = BATADV_FLAG_NEED_HARDIF; + if (WARN_ON((ops->internal_flags & mesh_dep_flags) && + (~ops->internal_flags & BATADV_FLAG_NEED_MESH))) + return -EINVAL;

if (ops->internal_flags & BATADV_FLAG_NEED_MESH) { soft_iface = batadv_get_softif_from_info(net, info); @@ -607,7 +770,23 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, info->user_ptr[0] = bat_priv; }

+ if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF) { + hard_iface = batadv_get_hardif_from_info(bat_priv, net, info); + if (IS_ERR(hard_iface)) { + ret = PTR_ERR(hard_iface); + goto err_put_softif; + } + + info->user_ptr[1] = hard_iface; + } + return 0; + +err_put_softif: + if (bat_priv) + dev_put(bat_priv->soft_iface); + + return ret; }

/** @@ -619,8 +798,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { + struct batadv_hard_iface *hard_iface; struct batadv_priv *bat_priv;

+ if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF && + info->user_ptr[1]) { + hard_iface = info->user_ptr[1]; + + batadv_hardif_put(hard_iface); + } + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { bat_priv = info->user_ptr[0]; dev_put(bat_priv->soft_iface); @@ -656,10 +843,13 @@ static const struct genl_ops batadv_netlink_ops[] = { .dumpit = batadv_algo_dump, }, { - .cmd = BATADV_CMD_GET_HARDIFS, - .flags = GENL_ADMIN_PERM, + .cmd = BATADV_CMD_GET_HARDIF, + /* can be retrieved by unprivileged users */ .policy = batadv_netlink_policy, - .dumpit = batadv_netlink_dump_hardifs, + .dumpit = batadv_netlink_dump_hardif, + .doit = batadv_netlink_get_hardif, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_HARDIF, }, { .cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL, @@ -722,6 +912,14 @@ static const struct genl_ops batadv_netlink_ops[] = { .doit = batadv_netlink_set_mesh, .internal_flags = BATADV_FLAG_NEED_MESH, }, + { + .cmd = BATADV_CMD_SET_HARDIF, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_hardif, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_HARDIF, + }, };

struct genl_family batadv_netlink_family __ro_after_init = {

From: Sven Eckelmann sven@narfation.org

The mesh interface can delay OGM messages to aggregate different ogms together in a single OGM packet.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 6 ++++++ net/batman-adv/netlink.c | 12 ++++++++++++ 2 files changed, 18 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 10f3cc34fe16..f8941e80d6b4 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -350,6 +350,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_VLANID,

+ /** + * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol + * messages of the mesh interface shall be aggregated or not. + */ + BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + /* add attributes above here, update the policy in netlink.c */

/** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index d40913bb9031..82665dc2eb2b 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -139,6 +139,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 }, [BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 }, [BATADV_ATTR_VLANID] = { .type = NLA_U16 }, + [BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 }, };

/** @@ -214,6 +215,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; }

+ if (nla_put_u8(msg, BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + !!atomic_read(&bat_priv->aggregated_ogms))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if);

@@ -296,6 +301,13 @@ static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info) static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) { struct batadv_priv *bat_priv = info->user_ptr[0]; + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]) { + attr = info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]; + + atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr)); + }

batadv_netlink_notify_mesh(bat_priv);

From: Sven Eckelmann sven@narfation.org

The mesh interface can use multiple slave/hard-interface ports at the same time to transport the traffic to other nodes.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BONDING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 6 ++++++ net/batman-adv/netlink.c | 11 +++++++++++ 2 files changed, 17 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index a4dadafe08dd..f74ff261ec8f 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -375,6 +375,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_ISOLATION_MASK,

+ /** + * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through + * the mesh will be sent using multiple interfaces at the same time. + */ + BATADV_ATTR_BONDING_ENABLED, + /* add attributes above here, update the policy in netlink.c */

/** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index fc80f003ed6e..310a2c339fd1 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -143,6 +143,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, + [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, };

/** @@ -279,6 +280,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, bat_priv->isolation_mark_mask)) goto nla_put_failure;

+ if (nla_put_u8(msg, BATADV_ATTR_BONDING_ENABLED, + !!atomic_read(&bat_priv->bonding))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if);

@@ -387,6 +392,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) bat_priv->isolation_mark_mask = nla_get_u32(attr); }

+ if (info->attrs[BATADV_ATTR_BONDING_ENABLED]) { + attr = info->attrs[BATADV_ATTR_BONDING_ENABLED]; + + atomic_set(&bat_priv->bonding, !!nla_get_u8(attr)); + } + batadv_netlink_notify_mesh(bat_priv);

return 0;

From: Sven Eckelmann sven@narfation.org

The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 8 ++++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 25 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 3cb35c661056..f303a1496476 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -388,6 +388,14 @@ enum batadv_nl_attrs { */ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,

+ /** + * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed + * arp table feature is enabled. This feature uses a distributed hash + * table to answer ARP requests without flooding the request through + * the whole mesh. + */ + BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + /* add attributes above here, update the policy in netlink.c */

/** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 40c940da9498..3028c2a5c782 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, };

/** @@ -291,6 +292,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_BLA */

+#ifdef CONFIG_BATMAN_ADV_DAT + if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + !!atomic_read(&bat_priv->distributed_arp_table))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_DAT */ + if (primary_if) batadv_hardif_put(primary_if);

@@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_BLA */

+#ifdef CONFIG_BATMAN_ADV_DAT + if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) { + attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]; + + atomic_set(&bat_priv->distributed_arp_table, + !!nla_get_u8(attr)); + batadv_dat_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_DAT */ + batadv_netlink_notify_mesh(bat_priv);

return 0;

From: Sven Eckelmann sven@narfation.org

The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes:

* u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server) * u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_SEL_CLASS

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 40 ++++++++++++++++++ net/batman-adv/gateway_client.c | 1 - net/batman-adv/gateway_common.c | 1 + net/batman-adv/gateway_common.h | 6 --- net/batman-adv/netlink.c | 92 +++++++++++++++++++++++++++++++++++++++++ net/batman-adv/soft-interface.c | 2 +- net/batman-adv/sysfs.c | 1 + 7 files changed, 135 insertions(+), 8 deletions(-)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 847841b8de5d..165272be6878 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -140,6 +140,20 @@ enum batadv_mcast_flags_priv { };

/** + * enum batadv_gw_modes - gateway mode of node + */ +enum batadv_gw_modes { + /** @BATADV_GW_MODE_OFF: gw mode disabled */ + BATADV_GW_MODE_OFF, + + /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */ + BATADV_GW_MODE_CLIENT, + + /** @BATADV_GW_MODE_SERVER: announce itself as gatway server */ + BATADV_GW_MODE_SERVER, +}; + +/** * enum batadv_nl_attrs - batman-adv netlink attributes */ enum batadv_nl_attrs { @@ -403,6 +417,32 @@ enum batadv_nl_attrs { */ BATADV_ATTR_FRAGMENTATION_ENABLED,

+ /** + * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_GW_MODE: defines the state of the gateway features. + * Possible values are specified in enum batadv_gw_modes + */ + BATADV_ATTR_GW_MODE, + + /** + * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node + * will use to choose a gateway if gw_mode was set to 'client'. + */ + BATADV_ATTR_GW_SEL_CLASS, + /* add attributes above here, update the policy in netlink.c */

/** diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index 0a6b9b30eabd..f5811f61aa92 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -47,7 +47,6 @@ #include <uapi/linux/batadv_packet.h> #include <uapi/linux/batman_adv.h>

-#include "gateway_common.h" #include "hard-interface.h" #include "log.h" #include "netlink.h" diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c index 53d03adc9bfc..e064de45e22c 100644 --- a/net/batman-adv/gateway_common.c +++ b/net/batman-adv/gateway_common.c @@ -28,6 +28,7 @@ #include <linux/stddef.h> #include <linux/string.h> #include <uapi/linux/batadv_packet.h> +#include <uapi/linux/batman_adv.h>

#include "gateway_client.h" #include "log.h" diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h index 89bae100a0b0..128467a0fb89 100644 --- a/net/batman-adv/gateway_common.h +++ b/net/batman-adv/gateway_common.h @@ -25,12 +25,6 @@

struct net_device;

-enum batadv_gw_modes { - BATADV_GW_MODE_OFF, - BATADV_GW_MODE_CLIENT, - BATADV_GW_MODE_SERVER, -}; - /** * enum batadv_bandwidth_units - bandwidth unit types */ diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 5b2160d2f482..473467afea91 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -51,6 +51,7 @@ #include "bridge_loop_avoidance.h" #include "distributed-arp-table.h" #include "gateway_client.h" +#include "gateway_common.h" #include "hard-interface.h" #include "multicast.h" #include "originator.h" @@ -147,6 +148,10 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_GW_BANDWIDTH_DOWN] = { .type = NLA_U32 }, + [BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 }, + [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 }, + [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, };

/** @@ -303,6 +308,28 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->fragmentation))) goto nla_put_failure;

+ if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_DOWN, + atomic_read(&bat_priv->gw.bandwidth_down))) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_UP, + atomic_read(&bat_priv->gw.bandwidth_up))) + goto nla_put_failure; + + if (nla_put_u8(msg, BATADV_ATTR_GW_MODE, + atomic_read(&bat_priv->gw.mode))) + goto nla_put_failure; + + if (bat_priv->algo_ops->gw.get_best_gw_node && + bat_priv->algo_ops->gw.is_eligible) { + /* GW selection class is not available if the routing algorithm + * in use does not implement the GW API + */ + if (nla_put_u32(msg, BATADV_ATTR_GW_SEL_CLASS, + atomic_read(&bat_priv->gw.sel_class))) + goto nla_put_failure; + } + if (primary_if) batadv_hardif_put(primary_if);

@@ -444,6 +471,71 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) batadv_update_min_mtu(bat_priv->soft_iface); }

+ if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]) { + attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]; + + atomic_set(&bat_priv->gw.bandwidth_down, nla_get_u32(attr)); + batadv_gw_tvlv_container_update(bat_priv); + } + + if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]) { + attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]; + + atomic_set(&bat_priv->gw.bandwidth_up, nla_get_u32(attr)); + batadv_gw_tvlv_container_update(bat_priv); + } + + if (info->attrs[BATADV_ATTR_GW_MODE]) { + u8 gw_mode; + + attr = info->attrs[BATADV_ATTR_GW_MODE]; + gw_mode = nla_get_u8(attr); + + if (gw_mode <= BATADV_GW_MODE_SERVER) { + /* Invoking batadv_gw_reselect() is not enough to really + * de-select the current GW. It will only instruct the + * gateway client code to perform a re-election the next + * time that this is needed. + * + * When gw client mode is being switched off the current + * GW must be de-selected explicitly otherwise no GW_ADD + * uevent is thrown on client mode re-activation. This + * is operation is performed in + * batadv_gw_check_client_stop(). + */ + batadv_gw_reselect(bat_priv); + + /* always call batadv_gw_check_client_stop() before + * changing the gateway state + */ + batadv_gw_check_client_stop(bat_priv); + atomic_set(&bat_priv->gw.mode, gw_mode); + batadv_gw_tvlv_container_update(bat_priv); + } + } + + if (info->attrs[BATADV_ATTR_GW_SEL_CLASS] && + bat_priv->algo_ops->gw.get_best_gw_node && + bat_priv->algo_ops->gw.is_eligible) { + /* setting the GW selection class is allowed only if the routing + * algorithm in use implements the GW API + */ + + u32 sel_class_max = 0xffffffffu; + u32 sel_class; + + attr = info->attrs[BATADV_ATTR_GW_SEL_CLASS]; + sel_class = nla_get_u32(attr); + + if (!bat_priv->algo_ops->gw.store_sel_class) + sel_class_max = BATADV_TQ_MAX_VALUE; + + if (sel_class >= 1 && sel_class <= sel_class_max) { + atomic_set(&bat_priv->gw.sel_class, sel_class); + batadv_gw_reselect(bat_priv); + } + } + batadv_netlink_notify_mesh(bat_priv);

return 0; diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index b14fb3462af7..12028c287de5 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -50,13 +50,13 @@ #include <linux/string.h> #include <linux/types.h> #include <uapi/linux/batadv_packet.h> +#include <uapi/linux/batman_adv.h>

#include "bat_algo.h" #include "bridge_loop_avoidance.h" #include "debugfs.h" #include "distributed-arp-table.h" #include "gateway_client.h" -#include "gateway_common.h" #include "hard-interface.h" #include "multicast.h" #include "network-coding.h" diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index e1b816262c53..64fd5932a555 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -40,6 +40,7 @@ #include <linux/stringify.h> #include <linux/workqueue.h> #include <uapi/linux/batadv_packet.h> +#include <uapi/linux/batman_adv.h>

#include "bridge_loop_avoidance.h" #include "distributed-arp-table.h"

From: Sven Eckelmann sven@narfation.org

In contrast to other modules, batman-adv allows to set the debug message verbosity per mesh/soft-interface and not per module (via modparam).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL attribute.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 6 ++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index b37cb923332e..6d36e4b47eb4 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -449,6 +449,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_HOP_PENALTY,

+ /** + * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages + * should be send to the debug log/trace ring buffer + */ + BATADV_ATTR_LOG_LEVEL, + /* add attributes above here, update the policy in netlink.c */

/** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index ce6e6f078765..8c019d46815c 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -53,6 +53,7 @@ #include "gateway_client.h" #include "gateway_common.h" #include "hard-interface.h" +#include "log.h" #include "multicast.h" #include "originator.h" #include "soft-interface.h" @@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 }, [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 }, + [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 }, };

/** @@ -335,6 +337,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, atomic_read(&bat_priv->hop_penalty))) goto nla_put_failure;

+#ifdef CONFIG_BATMAN_ADV_DEBUG + if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL, + atomic_read(&bat_priv->log_level))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_DEBUG */ + if (primary_if) batadv_hardif_put(primary_if);

@@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr)); }

+#ifdef CONFIG_BATMAN_ADV_DEBUG + if (info->attrs[BATADV_ATTR_LOG_LEVEL]) { + attr = info->attrs[BATADV_ATTR_LOG_LEVEL]; + + atomic_set(&bat_priv->log_level, + nla_get_u32(attr) & BATADV_DBG_ALL); + } +#endif /* CONFIG_BATMAN_ADV_DEBUG */ + batadv_netlink_notify_mesh(bat_priv);

return 0;

From: Sven Eckelmann sven@narfation.org

The mesh interface can use (in an homogeneous mesh) network coding, a mechanism that aims to increase the overall network throughput by fusing multiple packets in one transmission.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 7 +++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 24 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 38caaaae8a05..a4239c147bde 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -464,6 +464,13 @@ enum batadv_nl_attrs { */ BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,

+ /** + * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using + * some magic to send fewer wifi packets but still the same content) is + * enabled or not. + */ + BATADV_ATTR_NETWORK_CODING_ENABLED, + /* add attributes above here, update the policy in netlink.c */

/** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 475bd15f806c..6f01f92e6ab3 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -55,6 +55,7 @@ #include "hard-interface.h" #include "log.h" #include "multicast.h" +#include "network-coding.h" #include "originator.h" #include "soft-interface.h" #include "tp_meter.h" @@ -156,6 +157,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 }, [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 }, [BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 }, };

/** @@ -350,6 +352,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_MCAST */

+#ifdef CONFIG_BATMAN_ADV_NC + if (nla_put_u8(msg, BATADV_ATTR_NETWORK_CODING_ENABLED, + !!atomic_read(&bat_priv->network_coding))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_NC */ + if (primary_if) batadv_hardif_put(primary_if);

@@ -579,6 +587,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_MCAST */

+#ifdef CONFIG_BATMAN_ADV_NC + if (info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]) { + attr = info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]; + + atomic_set(&bat_priv->network_coding, !!nla_get_u8(attr)); + batadv_nc_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_NC */ + batadv_netlink_notify_mesh(bat_priv);

return 0;

From: Sven Eckelmann sven@narfation.org

The ELP packets are transmitted every elp_interval milliseconds on an slave/hard-interface. This value can be changed using the configuration interface.

The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL attribute.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- include/uapi/linux/batman_adv.h | 6 ++++++ net/batman-adv/netlink.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 6bedd4889c37..f966e497361b 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -477,6 +477,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_ORIG_INTERVAL,

+ /** + * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in + * which batman emits probing packets for neighbor sensing (ELP). + */ + BATADV_ATTR_ELP_INTERVAL, + /* add attributes above here, update the policy in netlink.c */

/** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index e25c139ba0e1..09187e6e92a3 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -159,6 +159,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 }, + [BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 }, };

/** @@ -825,6 +826,12 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg, goto nla_put_failure; }

+#ifdef CONFIG_BATMAN_ADV_BATMAN_V + if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL, + atomic_read(&hard_iface->bat_v.elp_interval))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_BATMAN_V */ + genlmsg_end(msg, hdr); return 0;

@@ -910,6 +917,16 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb, struct batadv_hard_iface *hard_iface = info->user_ptr[1]; struct batadv_priv *bat_priv = info->user_ptr[0];

+#ifdef CONFIG_BATMAN_ADV_BATMAN_V + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_ELP_INTERVAL]) { + attr = info->attrs[BATADV_ATTR_ELP_INTERVAL]; + + atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr)); + } +#endif /* CONFIG_BATMAN_ADV_BATMAN_V */ + batadv_netlink_notify_hardif(bat_priv, hard_iface);

return 0;

From: Sven Eckelmann sven@narfation.org

The generic netlink code is expected to trigger notification messages when configuration might have been changed. But the configuration of batman-adv is most of the time still done using sysfs. So the sysfs interface should also trigger the corresponding netlink messages via the "config" multicast group.

Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- net/batman-adv/netlink.c | 10 ++++---- net/batman-adv/netlink.h | 6 +++++ net/batman-adv/sysfs.c | 63 +++++++++++++++++++++++++++++++++++++++--------- 3 files changed, 63 insertions(+), 16 deletions(-)

diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 476b4c6017c9..67a58da2e6a0 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -385,7 +385,7 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, * * Return: 0 on success, < 0 on error */ -static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv) +int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv) { struct sk_buff *msg; int ret; @@ -852,8 +852,8 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg, * * Return: 0 on success, < 0 on error */ -static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, - struct batadv_hard_iface *hard_iface) +int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface) { struct sk_buff *msg; int ret; @@ -1057,8 +1057,8 @@ static int batadv_netlink_vlan_fill(struct sk_buff *msg, * * Return: 0 on success, < 0 on error */ -static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, - struct batadv_softif_vlan *vlan) +int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan) { struct sk_buff *msg; int ret; diff --git a/net/batman-adv/netlink.h b/net/batman-adv/netlink.h index 216484b8b82d..7273368544fc 100644 --- a/net/batman-adv/netlink.h +++ b/net/batman-adv/netlink.h @@ -34,6 +34,12 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst, u8 result, u32 test_time, u64 total_bytes, u32 cookie);

+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv); +int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface); +int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan); + extern struct genl_family batadv_netlink_family;

#endif /* _NET_BATMAN_ADV_NETLINK_H_ */ diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index 64fd5932a555..0b4b3fb778a6 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -48,6 +48,7 @@ #include "gateway_common.h" #include "hard-interface.h" #include "log.h" +#include "netlink.h" #include "network-coding.h" #include "soft-interface.h"

@@ -154,9 +155,14 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_priv *bat_priv = netdev_priv(net_dev); \ + ssize_t length; \ + \ + length = __batadv_store_bool_attr(buff, count, _post_func, attr,\ + &bat_priv->_name, net_dev); \ \ - return __batadv_store_bool_attr(buff, count, _post_func, attr, \ - &bat_priv->_name, net_dev); \ + batadv_netlink_notify_mesh(bat_priv); \ + \ + return length; \ }

#define BATADV_ATTR_SIF_SHOW_BOOL(_name) \ @@ -186,11 +192,16 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_priv *bat_priv = netdev_priv(net_dev); \ + ssize_t length; \ \ - return __batadv_store_uint_attr(buff, count, _min, _max, \ - _post_func, attr, \ - &bat_priv->_var, net_dev, \ - NULL); \ + length = __batadv_store_uint_attr(buff, count, _min, _max, \ + _post_func, attr, \ + &bat_priv->_var, net_dev, \ + NULL); \ + \ + batadv_netlink_notify_mesh(bat_priv); \ + \ + return length; \ }

#define BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \ @@ -223,6 +234,11 @@ ssize_t batadv_store_vlan_##_name(struct kobject *kobj, \ attr, &vlan->_name, \ bat_priv->soft_iface); \ \ + if (vlan->vid) \ + batadv_netlink_notify_vlan(bat_priv, vlan); \ + else \ + batadv_netlink_notify_mesh(bat_priv); \ + \ batadv_softif_vlan_put(vlan); \ return res; \ } @@ -256,6 +272,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_hard_iface *hard_iface; \ + struct batadv_priv *bat_priv; \ ssize_t length; \ \ hard_iface = batadv_hardif_get_by_netdev(net_dev); \ @@ -268,6 +285,11 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ hard_iface->soft_iface, \ net_dev); \ \ + if (hard_iface->soft_iface) { \ + bat_priv = netdev_priv(hard_iface->soft_iface); \ + batadv_netlink_notify_hardif(bat_priv, hard_iface); \ + } \ + \ batadv_hardif_put(hard_iface); \ return length; \ } @@ -537,6 +559,9 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj, batadv_gw_check_client_stop(bat_priv); atomic_set(&bat_priv->gw.mode, (unsigned int)gw_mode_tmp); batadv_gw_tvlv_container_update(bat_priv); + + batadv_netlink_notify_mesh(bat_priv); + return count; }

@@ -563,6 +588,7 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj, size_t count) { struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); + ssize_t length;

/* setting the GW selection class is allowed only if the routing * algorithm in use implements the GW API @@ -578,10 +604,14 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj, return bat_priv->algo_ops->gw.store_sel_class(bat_priv, buff, count);

- return __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE, - batadv_post_gw_reselect, attr, - &bat_priv->gw.sel_class, - bat_priv->soft_iface, NULL); + length = __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE, + batadv_post_gw_reselect, attr, + &bat_priv->gw.sel_class, + bat_priv->soft_iface, NULL); + + batadv_netlink_notify_mesh(bat_priv); + + return length; }

static ssize_t batadv_show_gw_bwidth(struct kobject *kobj, @@ -601,12 +631,18 @@ static ssize_t batadv_store_gw_bwidth(struct kobject *kobj, struct attribute *attr, char *buff, size_t count) { + struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); struct net_device *net_dev = batadv_kobj_to_netdev(kobj); + ssize_t length;

if (buff[count - 1] == '\n') buff[count - 1] = '\0';

- return batadv_gw_bandwidth_set(net_dev, buff, count); + length = batadv_gw_bandwidth_set(net_dev, buff, count); + + batadv_netlink_notify_mesh(bat_priv); + + return length; }

/** @@ -674,6 +710,8 @@ static ssize_t batadv_store_isolation_mark(struct kobject *kobj, "New skb mark for extended isolation: %#.8x/%#.8x\n", bat_priv->isolation_mark, bat_priv->isolation_mark_mask);

+ batadv_netlink_notify_mesh(bat_priv); + return count; }

@@ -1078,6 +1116,7 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj, struct attribute *attr, char *buff, size_t count) { + struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); struct net_device *net_dev = batadv_kobj_to_netdev(kobj); struct batadv_hard_iface *hard_iface; u32 tp_override; @@ -1108,6 +1147,8 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,

atomic_set(&hard_iface->bat_v.throughput_override, tp_override);

+ batadv_netlink_notify_hardif(bat_priv, hard_iface); + out: batadv_hardif_put(hard_iface); return count;