Dear all,

I have solved my problem.

It is related to the TCP checksum offload function: I am using as embedded platform PCEngines Alix 3d2, that do not support this function (and also qemu virtual machines do not support it).

This patch disable the tx checksum offload and everything now works fine for me!

--- soft-interface.c.old 2009-10-07 17:10:25.000000000 +0200 +++ soft-interface.c 2009-10-07 17:00:29.000000000 +0200 @@ -114,7 +114,7 @@ #endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) */ dev->destructor = free_netdev;

- dev->features |= NETIF_F_NO_CSUM; + /* dev->features |= NETIF_F_NO_CSUM; */ dev->mtu = hardif_min_mtu(); dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the skbuff for our header */

I’m not a kernel expert, and then let me know what do you think about this solution/workaround

andrea

On Tue, Oct 6, 2009 at 6:31 PM, a a.mailevent@gmail.com wrote:

Dear all,

analyzing in deep the problem I have seen that the problem is the checksum: as you can see in my previous .cap file, the packets with data from 192.168.100.2 have a wrong checksum (and my nodes are not using the HW checksum offload function) Then, I’m starting to investigate how the checksum is calculated. If you have any suggestion or comment, you are welcome!

andrea

On Tue, Oct 6, 2009 at 3:14 PM, a a.mailevent@gmail.com wrote:

...

Dear Marek,

On Tue, Oct 6, 2009 at 2:55 PM, Marek Lindner lindner_marek@yahoo.dewrote:

...

Hi,

...

you can find as attachment the dump on eth2 of GW (tcpdump -ni eth2 -s

0 -w

...

gw.cap); the output of batctl td -p 4 eth1 is:

I could not find anything revealing in the logs you provided. Could you please follow Sven's suggestion to log both ends as well ?

I could log on every interface; I will do it and send .cap files.

...

Just to not forget the obvious:

• What batman-adv version are you running ?

revision 1439

...

• GW1 routes the packets - does this work via NAT or do you manually add

GW1 routes packets, without NAT

...

routing entries to both ends ?

...

A question: am I the first one with this problem?

AFAIK batman-adv has no problem transporting TCP traffic (unless you found an undiscovered bug nobody has seen before). The most common source of trouble is the configuration of the setup, in particular MTU settings or routing issues (which is why most people simply bridge).

I understand your point about batman-adv; also for me, among batman nodes everything works fine. I will also test the system with bridge on GW

andrea

...

Regards, Marek _______________________________________________ B.A.T.M.A.N mailing list B.A.T.M.A.N@lists.open-mesh.net https://lists.open-mesh.net/mm/listinfo/b.a.t.m.a.n