Changes for v4: * removed one newline which slipped in with v3 * split the v3 patch in two ones
Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb ether header pointer set correctly since the following commit present in kernels >= 3.9:
"net: reset mac header in dev_start_xmit()" (6d1ccff627)
Therefore we can safely use eth_hdr() instead of skb->data now, which spares us some ugly type casts.
Signed-off-by: Linus Lüssing linus.luessing@web.de --- compat.h | 35 +++++++++++++++++++++++++++++++++++ soft-interface.c | 6 +++--- 2 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/compat.h b/compat.h index 57c9d96..8a0ccc5 100644 --- a/compat.h +++ b/compat.h @@ -332,6 +332,41 @@ static int __batadv_interface_set_mac_addr(x, y) pos && ({ n = pos->member.next; 1; }); \ pos = hlist_entry_safe(n, typeof(*pos), member))
+#define BATADV_SET_ETHTOOL_OPS(netdev, ops) \ + ((netdev)->ethtool_ops = (ops)) + +#define __batadv_interface_tx \ + ({ \ + int func(struct sk_buff *skb, struct net_device *soft_iface) \ + { \ + skb_reset_mac_header(skb); \ + return batadv_interface_tx(skb, soft_iface); \ + } \ + &func; \ + }) + +#undef SET_ETHTOOL_OPS +#define SET_ETHTOOL_OPS(dev, batadv_ethtool_ops) \ + ({ \ + const struct net_device_ops my_net_device_ops = { \ + .ndo_init = batadv_softif_init_late, \ + .ndo_open = batadv_interface_open, \ + .ndo_stop = batadv_interface_release, \ + .ndo_get_stats = batadv_interface_stats, \ + .ndo_vlan_rx_add_vid = batadv_interface_add_vid, \ + .ndo_vlan_rx_kill_vid = batadv_interface_kill_vid, \ + .ndo_set_mac_address = batadv_interface_set_mac_addr, \ + .ndo_change_mtu = batadv_interface_change_mtu, \ + .ndo_set_rx_mode = batadv_interface_set_rx_mode, \ + .ndo_start_xmit = __batadv_interface_tx, \ + .ndo_validate_addr = eth_validate_addr, \ + .ndo_add_slave = batadv_softif_slave_add, \ + .ndo_del_slave = batadv_softif_slave_del, \ + }; \ + dev->netdev_ops = &my_net_device_ops; \ + BATADV_SET_ETHTOOL_OPS(dev, batadv_ethtool_ops); \ + }) + #endif /* < KERNEL_VERSION(3, 9, 0) */
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 10, 0) diff --git a/soft-interface.c b/soft-interface.c index f82c267..66903a1 100644 --- a/soft-interface.c +++ b/soft-interface.c @@ -176,7 +176,7 @@ static int batadv_interface_tx(struct sk_buff *skb,
soft_iface->trans_start = jiffies; vid = batadv_get_vid(skb, 0); - ethhdr = (struct ethhdr *)skb->data; + ethhdr = eth_hdr(skb);
switch (ntohs(ethhdr->h_proto)) { case ETH_P_8021Q: @@ -194,7 +194,7 @@ static int batadv_interface_tx(struct sk_buff *skb, goto dropped;
/* skb->data might have been reallocated by batadv_bla_tx() */ - ethhdr = (struct ethhdr *)skb->data; + ethhdr = eth_hdr(skb);
/* Register the client MAC in the transtable */ if (!is_multicast_ether_addr(ethhdr->h_source)) { @@ -230,7 +230,7 @@ static int batadv_interface_tx(struct sk_buff *skb, /* skb->data may have been modified by * batadv_gw_dhcp_recipient_get() */ - ethhdr = (struct ethhdr *)skb->data; + ethhdr = eth_hdr(skb); /* if gw_mode is on, broadcast any non-DHCP message. * All the DHCP packets are going to be sent as unicast */
Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb ether header pointer set correctly since the following commit present in kernels >= 3.9:
"net: reset mac header in dev_start_xmit()" (6d1ccff627)
Therefore this commit removes the according, now redundant, skb_reset_mac_header() call in batadv_bla_tx().
Signed-off-by: Linus Lüssing linus.luessing@web.de --- bridge_loop_avoidance.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/bridge_loop_avoidance.c b/bridge_loop_avoidance.c index 5c0eda4..26ec489 100644 --- a/bridge_loop_avoidance.c +++ b/bridge_loop_avoidance.c @@ -1535,9 +1535,6 @@ int batadv_bla_tx(struct batadv_priv *bat_priv, struct sk_buff *skb, if (!atomic_read(&bat_priv->bridge_loop_avoidance)) goto allow;
- /* in VLAN case, the mac header might not be set. */ - skb_reset_mac_header(skb); - if (batadv_bla_process_claim(bat_priv, primary_if, skb)) goto handled;
b.a.t.m.a.n@lists.open-mesh.org