Hi. I saw strange batman logs while testing a batman-adv mesh. Batman-adv module was continuously generating the same logs including a " Creating new originator: b0:c6:9b:80:01:43". But b0:c6:9b:80:01:43 never appears in the output of 'batctl o': admin@HND-Mesh:~# batctl o [B.A.T.M.A.N. adv 2012.0.0, MainIF/MAC: wlan0/b0:c6:9b:80:01:5b (bat0)] Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... b0:c6:9b:80:01:5c 0.010s (255) b0:c6:9b:80:01:5c [ wlan0]: b0:c6:9b:80:01:5f (209) b0:c6:9b:80:01:6b (231) b0:c6:9b:80:01:6b (227) b0:c6:9b:80:01:5c (255) b0:c6:9b:80:01:5c ( 0) b0:c6:9b:80:01:45 3.830s (223) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:5c (209) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:5f (223) b0:c6:9b:80:01:6b 4.520s (255) b0:c6:9b:80:01:6b [ wlan0]: b0:c6:9b:80:01:5f (206) b0:c6:9b:80:01:5c (245) b0:c6:9b:80:01:6b (255) b0:c6:9b:80:01:6b (251) b0:c6:9b:80:01:3b 1.570s (237) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:5c (226) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:5f (237) b0:c6:9b:80:01:5f 3.520s (255) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:6b (231) b0:c6:9b:80:01:6b (227) b0:c6:9b:80:01:5c (244) b0:c6:9b:80:01:5f (255)
Now I can nerver reach b0:c6:9b:80:01:43. Anyone tell me why this happens? And, what does "Drop packet: packet within seqno protection time" mean? What is the "seqno protection time"? Any help will be appreciated and thanks in advance.
Here is part of the looply generated logs: [ 969] Creating new originator: b0:c6:9b:80:01:43 [ 969] old packet received, start protection [ 969] Drop packet: OGM via unknown neighbor! [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:57, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:43, via prev OG: b0:c6:9b:80:01:59, seqno 109828, ttvn 6, crc 5961, changes 0, td 229, TTL 48, V 14, IDF 0) [ 969] Drop packet: packet within seqno protection time (sender: b0:c6:9b:80:01:57) [ 969] Sending own packet (originator b0:c6:9b:80:01:56, seqno 1251, TTL 2) on interface wlan1 [b0:c6:9b:80:01:56] [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:56, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:56, via prev OG: b0:c6:9b:80:01:56, seqno 1251, ttvn 2, crc 51283, changes 0, td 255, TTL 2, V 14, IDF 0) [ 969] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:56) [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:56, via prev OG: b0:c6:9b:80:01:56, seqno 1251, ttvn 2, crc 51283, changes 0, td 233, TTL 1, V 14, IDF 1) [ 969] Drop packet: originator packet from myself (via neighbor) [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:56, via prev OG: b0:c6:9b:80:01:56, seqno 1251, ttvn 2, crc 51283, changes 0, td 233, TTL 1, V 14, IDF 1) [ 969] Drop packet: originator packet from myself (via neighbor) [ 969] Sending own packet (originator b0:c6:9b:80:01:5b, seqno 1251, TQ 255, TTL 50, IDF off, ttvn 2) on interface wlan0 [b0:c6:9b:80:01:5b] [ 969] Sending own packet (originator b0:c6:9b:80:01:5b, seqno 1251, TQ 255, TTL 50, IDF off, ttvn 2) on interface wlan1 [b0:c6:9b:80:01:56] [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:5b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 255, TTL 50, V 14, IDF 0) [ 969] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:5b) [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:56, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 255, TTL 50, V 14, IDF 0) [ 969] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:56) [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:5d, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5d, via prev OG: b0:c6:9b:80:01:5d, seqno 1246, ttvn 2, crc 38681, changes 0, td 255, TTL 2, V 14, IDF 0) [ 969] updating last_seqno: old 1245, new 1246 [ 969] bidirectional: orig = b0:c6:9b:80:01:5d neigh = b0:c6:9b:80:01:5d => own_bcast = 0, real recv = 62, local tq: 0, asym_penalty: 255, total tq: 0 [ 969] Forwarding packet: tq_orig: 0, tq_avg: 0, tq_forw: 0, ttl_orig: 1, ttl_forw: 1 [ 969] Forwarding packet: rebroadcast neighbor packet with direct link flag [ 969] Received BATMAN packet via NB: b0:c6:9b:80:01:5d, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5d, via prev OG: b0:c6:9b:80:01:5d, seqno 1246, ttvn 2, crc 38681, changes 0, td 255, TTL 2, V 14, IDF 0) [ 969] bidirectional: orig = b0:c6:9b:80:01:5d neigh = b0:c6:9b:80:01:5d => own_bcast = 0, real recv = 64, local tq: 0, asym_penalty: 255, total tq: 0 [ 969] Forwarding packet: tq_orig: 0, tq_avg: 0, tq_forw: 0, ttl_orig: 1, ttl_forw: 1 [ 969] Forwarding packet: rebroadcast neighbor packet with direct link flag [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 245, TTL 49, V 14, IDF 1) [ 970] Drop packet: originator packet from myself (via neighbor) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5d, via prev OG: b0:c6:9b:80:01:5d, seqno 1246, ttvn 2, crc 38681, changes 0, td 0, TTL 1, V 14, IDF 1) [ 970] Drop packet: originator packet with tq equal 0 [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 245, TTL 49, V 14, IDF 1) [ 970] Drop packet: originator packet from myself (via neighbor) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5d, via prev OG: b0:c6:9b:80:01:5d, seqno 1246, ttvn 2, crc 38681, changes 0, td 0, TTL 1, V 14, IDF 1) [ 970] Drop packet: originator packet with tq equal 0 [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5f, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 237, TTL 49, V 14, IDF 1) [ 970] Drop packet: originator packet from myself (via neighbor) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5f, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5d, via prev OG: b0:c6:9b:80:01:5d, seqno 1246, ttvn 2, crc 38681, changes 0, td 0, TTL 1, V 14, IDF 1) [ 970] Drop packet: originator packet with tq equal 0 [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5c, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 245, TTL 49, V 14, IDF 1) [ 970] Drop packet: originator packet from myself (via neighbor) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5c, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 245, TTL 49, V 14, IDF 1) [ 970] Drop packet: originator packet from myself (via neighbor) [ 970] Forwarding packet (originator b0:c6:9b:80:01:5d, seqno 1246, TTL 1) on interface wlan1 [b0:c6:9b:80:01:56] [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5d, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 245, TTL 49, V 14, IDF 0) [ 970] Drop packet: originator packet from myself (via neighbor) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5d, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5b, via prev OG: b0:c6:9b:80:01:5b, seqno 1251, ttvn 2, crc 51283, changes 0, td 245, TTL 49, V 14, IDF 0) [ 970] Drop packet: originator packet from myself (via neighbor) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:56, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5d, via prev OG: b0:c6:9b:80:01:5d, seqno 1246, ttvn 2, crc 38681, changes 0, td 0, TTL 1, V 14, IDF 1) [ 970] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:56) [ 970] Forwarding packet (originator b0:c6:9b:80:01:5d, seqno 1246, TTL 1) on interface wlan0 [b0:c6:9b:80:01:5b] [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5d, via prev OG: b0:c6:9b:80:01:5d, seqno 1246, ttvn 2, crc 38681, changes 0, td 0, TTL 1, V 14, IDF 1) [ 970] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:5b) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5c, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 255, TTL 50, V 14, IDF 0) [ 970] updating last_seqno: old 1245, new 1246 [ 970] bidirectional: orig = b0:c6:9b:80:01:5c neigh = b0:c6:9b:80:01:5c => own_bcast = 0, real recv = 63, local tq: 0, asym_penalty: 255, total tq: 0 [ 970] Forwarding packet: tq_orig: 0, tq_avg: 251, tq_forw: 0, ttl_orig: 49, ttl_forw: 49 [ 970] Forwarding packet: rebroadcast neighbor packet with direct link flag [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5d, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 255, TTL 50, V 14, IDF 0) [ 970] Drop packet: OGM via unknown neighbor! [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5c, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 255, TTL 50, V 14, IDF 0) [ 970] bidirectional: orig = b0:c6:9b:80:01:5c neigh = b0:c6:9b:80:01:5c => own_bcast = 63, real recv = 64, local tq: 251, asym_penalty: 255, total tq: 251 [ 970] update_originator(): Searching and updating originator entry of received packet [ 970] Updating existing last-hop neighbor of originator [ 970] Forwarding packet: tq_orig: 251, tq_avg: 251, tq_forw: 241, ttl_orig: 49, ttl_forw: 49 [ 970] Forwarding packet: rebroadcast neighbor packet with direct link flag [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5d, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 255, TTL 50, V 14, IDF 0) [ 970] Drop packet: OGM via unknown neighbor! [ 970] Originator timeout: originator b0:c6:9b:80:01:43, last_valid 0 [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 233, TTL 49, V 14, IDF 1) [ 970] bidirectional: orig = b0:c6:9b:80:01:5c neigh = b0:c6:9b:80:01:6b => own_bcast = 64, real recv = 64, local tq: 255, asym_penalty: 255, total tq: 233 [ 970] update_originator(): Searching and updating originator entry of received packet [ 970] Updating existing last-hop neighbor of originator [ 970] Drop packet: duplicate packet received [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:6b, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 233, TTL 49, V 14, IDF 1) [ 970] bidirectional: orig = b0:c6:9b:80:01:5c neigh = b0:c6:9b:80:01:6b => own_bcast = 63, real recv = 64, local tq: 251, asym_penalty: 255, total tq: 229 [ 970] update_originator(): Searching and updating originator entry of received packet [ 970] Updating existing last-hop neighbor of originator [ 970] Drop packet: duplicate packet received [ 970] Forwarding packet (originator b0:c6:9b:80:01:5c, seqno 1246, TQ 0, TTL 49, IDF off, ttvn 2) on interface wlan0 [b0:c6:9b:80:01:5b] [ 970] Forwarding packet (originator b0:c6:9b:80:01:5c, seqno 1246, TQ 0, TTL 49, IDF on, ttvn 2) on interface wlan1 [b0:c6:9b:80:01:56] [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 0, TTL 49, V 14, IDF 0) [ 970] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:5b) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:56, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 0, TTL 49, V 14, IDF 1) [ 970] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:56) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5f, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 228, TTL 49, V 14, IDF 1) [ 970] bidirectional: orig = b0:c6:9b:80:01:5c neigh = b0:c6:9b:80:01:5f => own_bcast = 64, real recv = 64, local tq: 255, asym_penalty: 255, total tq: 228 [ 970] update_originator(): Searching and updating originator entry of received packet [ 970] Updating existing last-hop neighbor of originator [ 970] Drop packet: duplicate packet received [ 970] Forwarding packet (originator b0:c6:9b:80:01:5c, seqno 1246, TQ 241, TTL 49, IDF on, ttvn 2) on interface wlan0 [b0:c6:9b:80:01:5b] [ 970] Forwarding packet (originator b0:c6:9b:80:01:5c, seqno 1246, TQ 241, TTL 49, IDF off, ttvn 2) on interface wlan1 [b0:c6:9b:80:01:56] [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:5b, IF: wlan1 [b0:c6:9b:80:01:56] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 241, TTL 49, V 14, IDF 1) [ 970] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:5b) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:56, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:5c, via prev OG: b0:c6:9b:80:01:5c, seqno 1246, ttvn 2, crc 38681, changes 0, td 241, TTL 49, V 14, IDF 0) [ 970] Drop packet: received my own broadcast (sender: b0:c6:9b:80:01:56) [ 970] Received BATMAN packet via NB: b0:c6:9b:80:01:6c, IF: wlan0 [b0:c6:9b:80:01:5b] (from OG: b0:c6:9b:80:01:43, via prev OG: b0:c6:9b:80:01:43, seqno 109829, ttvn 6, crc 5961, changes 0, td 245, TTL 49, V 14, IDF 1) [ 970] Creating new originator: b0:c6:9b:80:01:43 [ 970] old packet received, start protection [ 970] Drop packet: OGM via unknown neighbor!
Hi,
I saw strange batman logs while testing a batman-adv mesh. Batman-adv module was continuously generating the same logs including a " Creating new originator: b0:c6:9b:80:01:43". But b0:c6:9b:80:01:43 never appears in the output of 'batctl o': admin@HND-Mesh:~# batctl o [B.A.T.M.A.N. adv 2012.0.0, MainIF/MAC: wlan0/b0:c6:9b:80:01:5b (bat0)] Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... b0:c6:9b:80:01:5c 0.010s (255) b0:c6:9b:80:01:5c [ wlan0]: b0:c6:9b:80:01:5f (209) b0:c6:9b:80:01:6b (231) b0:c6:9b:80:01:6b (227) b0:c6:9b:80:01:5c (255) b0:c6:9b:80:01:5c ( 0) b0:c6:9b:80:01:45 3.830s (223) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:5c (209) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:5f (223) b0:c6:9b:80:01:6b 4.520s (255) b0:c6:9b:80:01:6b [ wlan0]: b0:c6:9b:80:01:5f (206) b0:c6:9b:80:01:5c (245) b0:c6:9b:80:01:6b (255) b0:c6:9b:80:01:6b (251) b0:c6:9b:80:01:3b 1.570s (237) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:5c (226) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:5f (237) b0:c6:9b:80:01:5f 3.520s (255) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:6b (231) b0:c6:9b:80:01:6b (227) b0:c6:9b:80:01:5c (244) b0:c6:9b:80:01:5f (255)
Now I can nerver reach b0:c6:9b:80:01:43. Anyone tell me why this happens?
according to your logs OGMs from b0:c6:9b:80:01:43 are received via nodes that are not in your routing table either: * b0:c6:9b:80:01:57 * b0:c6:9b:80:01:6c
Therefore you see the warning: Drop packet: OGM via unknown neighbor! Batman-adv can't create a route to a an originator without having a next hop.
Do all nodes in your network run the same batman-adv version (2012.0.0) ?
Regards, Marek
Hi, Marek. Every nodes run the same version of batman. I attatch the topology of my mesh network.When b0:c6:9b:80:01:53 is on (working),b0:c6:9b:80:01:5f can reach b0:c6:9b:80:01:43,and the hole network is ok.b0:c6:9b:80:01:5b's nexthop to b0:c6:9b:80:01:43 is b0:c6:9b:80:01:57 or b0:c6:9b:80:01:6c, and sometimes b0:c6:9b:80:01:53. But when I shut b0:c6:9b:80:01:53 down,it seems b0:c6:9b:80:01:5b can't reach b0:c6:9b:80:01:57 neither b0:c6:9b:80:01:6c,as I mentioned in my firt email. When I turn b0:c6:9b:80:01:53 on again,the hole mesh is ok again. Marek,can you tell me what the problem probably is.
-----Original Message----- From: Marek Lindner [mailto:lindner_marek@yahoo.de] Sent: Saturday, May 26, 2012 10:55 PM To: b.a.t.m.a.n@lists.open-mesh.org Cc: puyou.lu Subject: Re: [B.A.T.M.A.N.] Can't create new originator
Hi,
I saw strange batman logs while testing a batman-adv mesh. Batman-adv module was continuously generating the same logs including a " Creating new originator: b0:c6:9b:80:01:43". But b0:c6:9b:80:01:43 never appears in the output of 'batctl o': admin@HND-Mesh:~# batctl o [B.A.T.M.A.N. adv 2012.0.0, MainIF/MAC: wlan0/b0:c6:9b:80:01:5b (bat0)] Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... b0:c6:9b:80:01:5c 0.010s (255) b0:c6:9b:80:01:5c [ wlan0]: b0:c6:9b:80:01:5f (209) b0:c6:9b:80:01:6b (231) b0:c6:9b:80:01:6b (227) b0:c6:9b:80:01:5c (255) b0:c6:9b:80:01:5c ( 0) b0:c6:9b:80:01:45 3.830s (223) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:5c (209) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:5f (223) b0:c6:9b:80:01:6b 4.520s (255) b0:c6:9b:80:01:6b [ wlan0]: b0:c6:9b:80:01:5f (206) b0:c6:9b:80:01:5c (245) b0:c6:9b:80:01:6b (255) b0:c6:9b:80:01:6b (251) b0:c6:9b:80:01:3b 1.570s (237) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:5c (226) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:6b ( 0) b0:c6:9b:80:01:5f (237) b0:c6:9b:80:01:5f 3.520s (255) b0:c6:9b:80:01:5f [ wlan0]: b0:c6:9b:80:01:6b (231) b0:c6:9b:80:01:6b (227) b0:c6:9b:80:01:5c (244) b0:c6:9b:80:01:5f (255)
Now I can nerver reach b0:c6:9b:80:01:43. Anyone tell me why this happens?
according to your logs OGMs from b0:c6:9b:80:01:43 are received via nodes that are not in your routing table either:
- b0:c6:9b:80:01:57
- b0:c6:9b:80:01:6c
Therefore you see the warning: Drop packet: OGM via unknown neighbor! Batman-adv can't create a route to a an originator without having a next hop.
Do all nodes in your network run the same batman-adv version (2012.0.0) ?
Regards, Marek
On Monday, May 28, 2012 09:23:11 puyou.lu wrote:
Every nodes run the same version of batman. I attatch the topology of my mesh network.When b0:c6:9b:80:01:53 is on (working),b0:c6:9b:80:01:5f can reach b0:c6:9b:80:01:43,and the hole network is ok.b0:c6:9b:80:01:5b's nexthop to b0:c6:9b:80:01:43 is b0:c6:9b:80:01:57 or b0:c6:9b:80:01:6c, and sometimes b0:c6:9b:80:01:53. But when I shut b0:c6:9b:80:01:53 down,it seems b0:c6:9b:80:01:5b can't reach b0:c6:9b:80:01:57 neither b0:c6:9b:80:01:6c,as I mentioned in my firt email. When I turn b0:c6:9b:80:01:53 on again,the hole mesh is ok again. Marek,can you tell me what the problem probably is.
The mesh connections are too weak without b0:c6:9b:80:01:53 ? I don't really have an idea what your setup is and how it looks like to draw any meaningful conclusion.
Regards, Marek
b.a.t.m.a.n@lists.open-mesh.org