[B.A.T.M.A.N.] [PATCH 1/2] batman-adv: split name from variable for uint mesh attributes
From: Antonio Quartulli antonio@open-mesh.com
Some mesh attributes are behind substructs in the batadv_priv object and for this reason the name cannot be used anymore to refer to them.
This patch allows to specify the variable name where the attribute is stored inside batadv_priv instead of using the name
Signed-off-by: Antonio Quartulli antonio@open-mesh.com --- sysfs.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-)
diff --git a/sysfs.c b/sysfs.c index a63c3eb..97a6192 100644 --- a/sysfs.c +++ b/sysfs.c @@ -151,7 +151,7 @@ ssize_t batadv_show_##_name(struct kobject *kobj, \ static BATADV_ATTR(_name, _mode, batadv_show_##_name, \ batadv_store_##_name)
-#define BATADV_ATTR_SIF_STORE_UINT(_name, _min, _max, _post_func) \ +#define BATADV_ATTR_SIF_STORE_UINT(_name, _var, _min, _max, _post_func) \ ssize_t batadv_store_##_name(struct kobject *kobj, \ struct attribute *attr, char *buff, \ size_t count) \ @@ -161,24 +161,24 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ \ return __batadv_store_uint_attr(buff, count, _min, _max, \ _post_func, attr, \ - &bat_priv->_name, net_dev); \ + &bat_priv->_var, net_dev); \ }
-#define BATADV_ATTR_SIF_SHOW_UINT(_name) \ +#define BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \ ssize_t batadv_show_##_name(struct kobject *kobj, \ struct attribute *attr, char *buff) \ { \ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); \ \ - return sprintf(buff, "%i\n", atomic_read(&bat_priv->_name)); \ + return sprintf(buff, "%i\n", atomic_read(&bat_priv->_var)); \ } \
/* Use this, if you are going to set [name] in the soft-interface * (bat_priv) to an unsigned integer value */ -#define BATADV_ATTR_SIF_UINT(_name, _mode, _min, _max, _post_func) \ - static BATADV_ATTR_SIF_STORE_UINT(_name, _min, _max, _post_func)\ - static BATADV_ATTR_SIF_SHOW_UINT(_name) \ +#define BATADV_ATTR_SIF_UINT(_name, _var, _mode, _min, _max, _post_func)\ + static BATADV_ATTR_SIF_STORE_UINT(_name, _var, _min, _max, _post_func)\ + static BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \ static BATADV_ATTR(_name, _mode, batadv_show_##_name, \ batadv_store_##_name)
@@ -540,19 +540,20 @@ BATADV_ATTR_SIF_BOOL(fragmentation, S_IRUGO | S_IWUSR, batadv_update_min_mtu); static BATADV_ATTR(routing_algo, S_IRUGO, batadv_show_bat_algo, NULL); static BATADV_ATTR(gw_mode, S_IRUGO | S_IWUSR, batadv_show_gw_mode, batadv_store_gw_mode); -BATADV_ATTR_SIF_UINT(orig_interval, S_IRUGO | S_IWUSR, 2 * BATADV_JITTER, - INT_MAX, NULL); -BATADV_ATTR_SIF_UINT(hop_penalty, S_IRUGO | S_IWUSR, 0, BATADV_TQ_MAX_VALUE, - NULL); -BATADV_ATTR_SIF_UINT(gw_sel_class, S_IRUGO | S_IWUSR, 1, BATADV_TQ_MAX_VALUE, - batadv_post_gw_reselect); +BATADV_ATTR_SIF_UINT(orig_interval, orig_interval, S_IRUGO | S_IWUSR, + 2 * BATADV_JITTER, INT_MAX, NULL); +BATADV_ATTR_SIF_UINT(hop_penalty, hop_penalty, S_IRUGO | S_IWUSR, 0, + BATADV_TQ_MAX_VALUE, NULL); +BATADV_ATTR_SIF_UINT(gw_sel_class, gw_sel_class, S_IRUGO | S_IWUSR, 1, + BATADV_TQ_MAX_VALUE, batadv_post_gw_reselect); static BATADV_ATTR(gw_bandwidth, S_IRUGO | S_IWUSR, batadv_show_gw_bwidth, batadv_store_gw_bwidth); #ifdef CONFIG_BATMAN_ADV_MCAST BATADV_ATTR_SIF_BOOL(multicast_mode, S_IRUGO | S_IWUSR, NULL); #endif #ifdef CONFIG_BATMAN_ADV_DEBUG -BATADV_ATTR_SIF_UINT(log_level, S_IRUGO | S_IWUSR, 0, BATADV_DBG_ALL, NULL); +BATADV_ATTR_SIF_UINT(log_level, log_level, S_IRUGO | S_IWUSR, 0, + BATADV_DBG_ALL, NULL); #endif #ifdef CONFIG_BATMAN_ADV_NC BATADV_ATTR_SIF_BOOL(network_coding, S_IRUGO | S_IWUSR,
From: Antonio Quartulli antonio@open-mesh.com
This API has to be used to let any routing protocol free neighbor specific allocated resources
Signed-off-by: Antonio Quartulli antonio@open-mesh.com --- originator.c | 6 ++++++ types.h | 4 ++++ 2 files changed, 10 insertions(+)
diff --git a/originator.c b/originator.c index 90e805a..9e04e60 100644 --- a/originator.c +++ b/originator.c @@ -197,13 +197,19 @@ static void batadv_neigh_node_free_rcu(struct rcu_head *rcu) struct hlist_node *node_tmp; struct batadv_neigh_node *neigh_node; struct batadv_neigh_ifinfo *neigh_ifinfo; + struct batadv_algo_ops *bao;
neigh_node = container_of(rcu, struct batadv_neigh_node, rcu); + bao = neigh_node->orig_node->bat_priv->bat_algo_ops;
hlist_for_each_entry_safe(neigh_ifinfo, node_tmp, &neigh_node->ifinfo_list, list) { batadv_neigh_ifinfo_free_ref_now(neigh_ifinfo); } + + if (bao->bat_neigh_free) + bao->bat_neigh_free(neigh_node); + batadv_hardif_free_ref_now(neigh_node->if_incoming);
kfree(neigh_node); diff --git a/types.h b/types.h index de09807..3b096c4 100644 --- a/types.h +++ b/types.h @@ -1120,6 +1120,8 @@ struct batadv_forw_packet { * @bat_neigh_is_equiv_or_better: check if neigh1 is equally good or better * than neigh2 for their respective outgoing interface from the metric * prospective + * @bat_neigh_free: free the resources allocated by the routing algorithm for a + * neigh_node object * @bat_orig_print: print the originator table (optional) * @bat_orig_free: free the resources allocated by the routing algorithm for an * orig_node object @@ -1137,6 +1139,7 @@ struct batadv_algo_ops { void (*bat_primary_iface_set)(struct batadv_hard_iface *hard_iface); void (*bat_ogm_schedule)(struct batadv_hard_iface *hard_iface); void (*bat_ogm_emit)(struct batadv_forw_packet *forw_packet); + /* neigh_node handling API */ int (*bat_neigh_cmp)(struct batadv_neigh_node *neigh1, struct batadv_hard_iface *if_outgoing1, struct batadv_neigh_node *neigh2, @@ -1146,6 +1149,7 @@ struct batadv_algo_ops { struct batadv_hard_iface *if_outgoing1, struct batadv_neigh_node *neigh2, struct batadv_hard_iface *if_outgoing2); + void (*bat_neigh_free)(struct batadv_neigh_node *neigh); /* orig_node handling API */ void (*bat_orig_print)(struct batadv_priv *priv, struct seq_file *seq, struct batadv_hard_iface *hard_iface);
On Sunday, March 01, 2015 00:50:17 Marek Lindner wrote:
From: Antonio Quartulli antonio@open-mesh.com
This API has to be used to let any routing protocol free neighbor specific allocated resources
Signed-off-by: Antonio Quartulli antonio@open-mesh.com
originator.c | 6 ++++++ types.h | 4 ++++ 2 files changed, 10 insertions(+)
Applied in revision 956e12a.
Thanks, Marek
On Sunday, March 01, 2015 00:50:16 Marek Lindner wrote:
From: Antonio Quartulli antonio@open-mesh.com
Some mesh attributes are behind substructs in the batadv_priv object and for this reason the name cannot be used anymore to refer to them.
This patch allows to specify the variable name where the attribute is stored inside batadv_priv instead of using the name
Signed-off-by: Antonio Quartulli antonio@open-mesh.com
sysfs.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-)
Applied in revision a915b64.
Thanks, Marek
b.a.t.m.a.n@lists.open-mesh.org
-
Marek Lindner