With this patch the functions batadv_send_skb_unicast() and batadv_send_skb_unicast_4addr() are further refined into batadv_send_skb_tt(), batadv_send_skb_tt_4addr() and batadv_send_skb_gw(). This way we avoid any guessing about where to send a packet in the unicast forwarding methods and let the callers decide.
This is going to be useful for the upcoming multicast related patches in particular.
Signed-off-by: Linus Lüssing linus.luessing@web.de --- distributed-arp-table.c | 7 ++-- send.c | 88 ++++++++++++++++++++++++++++++++++++++--------- send.h | 52 ++++++++++++++++++---------- soft-interface.c | 6 +++- 4 files changed, 112 insertions(+), 41 deletions(-)
diff --git a/distributed-arp-table.c b/distributed-arp-table.c index f2543c2..5399c29 100644 --- a/distributed-arp-table.c +++ b/distributed-arp-table.c @@ -1026,11 +1026,10 @@ bool batadv_dat_snoop_incoming_arp_request(struct batadv_priv *bat_priv, * that a node not using the 4addr packet format doesn't support it. */ if (hdr_size == sizeof(struct batadv_unicast_4addr_packet)) - err = batadv_send_skb_unicast_4addr(bat_priv, skb_new, - BATADV_P_DAT_CACHE_REPLY, - vid); + err = batadv_send_skb_tt_4addr(bat_priv, skb_new, + BATADV_P_DAT_CACHE_REPLY, vid); else - err = batadv_send_skb_unicast(bat_priv, skb_new, vid); + err = batadv_send_skb_tt(bat_priv, skb_new, vid);
if (!err) { batadv_inc_counter(bat_priv, BATADV_CNT_DAT_CACHED_REPLY_TX); diff --git a/send.c b/send.c index b631355..c9c33d8 100644 --- a/send.c +++ b/send.c @@ -235,36 +235,34 @@ out: }
/** - * batadv_send_generic_unicast_skb - send an skb as unicast + * batadv_send_skb_unicast - encapsulate and send an skb via unicast * @bat_priv: the bat priv with all the soft interface information * @skb: payload to send * @packet_type: the batman unicast packet type to use * @packet_subtype: the unicast 4addr packet subtype (only relevant for unicast * 4addr packets) + * @orig_node: the originator to send the packet to * @vid: the vid to be used to search the translation table * - * Returns 1 in case of error or 0 otherwise. + * Wrap the given skb into a batman-adv unicast or unicast-4addr header + * depending on whether BATADV_UNICAST or BATADV_UNICAST_4ADDR was supplied + * as packet_type. + * + * Then send this frame to the given orig_node and release a reference to + * this orig_node. + * + * Return 1 in case of error or 0 otherwise. */ -int batadv_send_skb_generic_unicast(struct batadv_priv *bat_priv, - struct sk_buff *skb, int packet_type, - int packet_subtype, - unsigned short vid) +static int batadv_send_skb_unicast(struct batadv_priv *bat_priv, + struct sk_buff *skb, int packet_type, + int packet_subtype, + struct batadv_orig_node *orig_node, + unsigned short vid) { struct ethhdr *ethhdr = (struct ethhdr *)skb->data; struct batadv_unicast_packet *unicast_packet; - struct batadv_orig_node *orig_node; int ret = NET_RX_DROP;
- /* get routing information */ - if (is_multicast_ether_addr(ethhdr->h_dest)) - orig_node = batadv_gw_get_selected_orig(bat_priv); - else - /* check for tt host - increases orig_node refcount. - * returns NULL in case of AP isolation - */ - orig_node = batadv_transtable_search(bat_priv, ethhdr->h_source, - ethhdr->h_dest, vid); - if (!orig_node) goto out;
@@ -304,6 +302,62 @@ out: return ret; }
+/** + * batadv_send_skb_generic_tt - send an skb to a translation table node + * @bat_priv: the bat priv with all the soft interface information + * @skb: payload to send + * @packet_type: the batman unicast packet type to use + * @packet_subtype: the unicast 4addr packet subtype (only relevant for unicast + * 4addr packets) + * @vid: the vid to be used to search the translation table + * + * Look up the destination node for the destination address in the ethernet + * header via the translation table. + * + * Wrap the given skb into a batman-adv unicast or unicast-4addr header + * depending on whether BATADV_UNICAST or BATADV_UNICAST_4ADDR was supplied + * as packet_type. + * + * Then send this frame to the according destination node. + * + * Return 1 in case of error or 0 otherwise. + */ +int batadv_send_skb_generic_tt(struct batadv_priv *bat_priv, + struct sk_buff *skb, int packet_type, + int packet_subtype, unsigned short vid) +{ + struct ethhdr *ethhdr = (struct ethhdr *)skb->data; + struct batadv_orig_node *orig_node; + + orig_node = batadv_transtable_search(bat_priv, ethhdr->h_source, + ethhdr->h_dest, vid); + return batadv_send_skb_unicast(bat_priv, skb, packet_type, + packet_subtype, orig_node, vid); +} + +/** + * batadv_send_skb_gw - send an skb to a gateway node + * @bat_priv: the bat priv with all the soft interface information + * @skb: payload to send + * @vid: the vid to be used to search the translation table + * + * Look up the currently selected gateway. + * + * Wrap the given skb into a batman-adv unicast header and send this frame + * to this gateway node. + * + * Return 1 in case of error or 0 otherwise. + */ +int batadv_send_skb_gw(struct batadv_priv *bat_priv, struct sk_buff *skb, + unsigned short vid) +{ + struct batadv_orig_node *orig_node; + + orig_node = batadv_gw_get_selected_orig(bat_priv); + return batadv_send_skb_unicast(bat_priv, skb, BATADV_UNICAST, 0, + orig_node, vid); +} + void batadv_schedule_bat_ogm(struct batadv_hard_iface *hard_iface) { struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); diff --git a/send.h b/send.h index c030cb7..87c4426 100644 --- a/send.h +++ b/send.h @@ -38,45 +38,59 @@ bool batadv_send_skb_prepare_unicast_4addr(struct batadv_priv *bat_priv, struct sk_buff *skb, struct batadv_orig_node *orig_node, int packet_subtype); -int batadv_send_skb_generic_unicast(struct batadv_priv *bat_priv, - struct sk_buff *skb, int packet_type, - int packet_subtype, - unsigned short vid); +int batadv_send_skb_generic_tt(struct batadv_priv *bat_priv, + struct sk_buff *skb, int packet_type, + int packet_subtype, unsigned short vid); +int batadv_send_skb_gw(struct batadv_priv *bat_priv, struct sk_buff *skb, + unsigned short vid);
/** - * batadv_send_unicast_skb - send the skb encapsulated in a unicast packet + * batadv_send_skb_tt - send an skb to a translation table node * @bat_priv: the bat priv with all the soft interface information * @skb: the payload to send * @vid: the vid to be used to search the translation table * + * Look up the destination node for the destination address in the ethernet + * header via the translation table. + * + * Wrap the given skb into a batman-adv unicast header. + * + * Then send this frame to the according destination node. + * * Returns 1 in case of error or 0 otherwise. */ -static inline int batadv_send_skb_unicast(struct batadv_priv *bat_priv, - struct sk_buff *skb, - unsigned short vid) +static inline int batadv_send_skb_tt(struct batadv_priv *bat_priv, + struct sk_buff *skb, + unsigned short vid) { - return batadv_send_skb_generic_unicast(bat_priv, skb, BATADV_UNICAST, - 0, vid); + return batadv_send_skb_generic_tt(bat_priv, skb, BATADV_UNICAST, 0, + vid); }
/** - * batadv_send_4addr_unicast_skb - send the skb encapsulated in a unicast 4addr - * packet + * batadv_send_skb_tt_4addr - send an skb to a translation table node * @bat_priv: the bat priv with all the soft interface information * @skb: the payload to send * @packet_subtype: the unicast 4addr packet subtype to use * @vid: the vid to be used to search the translation table * + * Look up the destination node for the destination address in the ethernet + * header via the translation table. + * + * Wrap the given skb into a batman-adv unicast-4addr header. + * + * Then send this frame to the according destination node. + * * Returns 1 in case of error or 0 otherwise. */ -static inline int batadv_send_skb_unicast_4addr(struct batadv_priv *bat_priv, - struct sk_buff *skb, - int packet_subtype, - unsigned short vid) +static inline int batadv_send_skb_tt_4addr(struct batadv_priv *bat_priv, + struct sk_buff *skb, + int packet_subtype, + unsigned short vid) { - return batadv_send_skb_generic_unicast(bat_priv, skb, - BATADV_UNICAST_4ADDR, - packet_subtype, vid); + return batadv_send_skb_generic_tt(bat_priv, skb, + BATADV_UNICAST_4ADDR, + packet_subtype, vid); }
#endif /* _NET_BATMAN_ADV_SEND_H_ */ diff --git a/soft-interface.c b/soft-interface.c index d897194..e84ef45 100644 --- a/soft-interface.c +++ b/soft-interface.c @@ -289,7 +289,11 @@ static int batadv_interface_tx(struct sk_buff *skb,
batadv_dat_snoop_outgoing_arp_reply(bat_priv, skb);
- ret = batadv_send_skb_unicast(bat_priv, skb, vid); + if (is_multicast_ether_addr(ethhdr->h_dest)) + ret = batadv_send_skb_gw(bat_priv, skb, vid); + else + ret = batadv_send_skb_tt(bat_priv, skb, vid); + if (ret != 0) goto dropped_freed; }
On Sat, Jun 29, 2013 at 02:02:39PM +0200, Linus Lüssing wrote:
+/**
- batadv_send_skb_generic_tt - send an skb to a translation table node
I don't really like the expression "translation table node"..it looks like we have different type of nodes...What about a simple"to a destination using the Translation Table" ? you can go on a new line with the short description, if needed.
- @bat_priv: the bat priv with all the soft interface information
- @skb: payload to send
- @packet_type: the batman unicast packet type to use
- @packet_subtype: the unicast 4addr packet subtype (only relevant for unicast
- 4addr packets)
- @vid: the vid to be used to search the translation table
- Look up the destination node for the destination address in the ethernet
- header via the translation table.
What about substituting "destination node" with "recipient node" to avoid repeating destination?
- Wrap the given skb into a batman-adv unicast or unicast-4addr header
- depending on whether BATADV_UNICAST or BATADV_UNICAST_4ADDR was supplied
- as packet_type.
- Then send this frame to the according destination node.
Since the above is a list of steps performed by the function, I'd rather remove the blank lines you've added between the paragraphs.
[...]
/**
- batadv_send_unicast_skb - send the skb encapsulated in a unicast packet
- batadv_send_skb_tt - send an skb to a translation table node
same as above
- @bat_priv: the bat priv with all the soft interface information
- @skb: the payload to send
- @vid: the vid to be used to search the translation table
- Look up the destination node for the destination address in the ethernet
- header via the translation table.
same as above
- Wrap the given skb into a batman-adv unicast header.
- Then send this frame to the according destination node.
same as above
/**
- batadv_send_4addr_unicast_skb - send the skb encapsulated in a unicast 4addr
- packet
- batadv_send_skb_tt_4addr - send an skb to a translation table node
same as above
- @bat_priv: the bat priv with all the soft interface information
- @skb: the payload to send
- @packet_subtype: the unicast 4addr packet subtype to use
- @vid: the vid to be used to search the translation table
- Look up the destination node for the destination address in the ethernet
- header via the translation table.
- Wrap the given skb into a batman-adv unicast-4addr header.
- Then send this frame to the according destination node.
same as above
- Returns 1 in case of error or 0 otherwise.
*/ -static inline int batadv_send_skb_unicast_4addr(struct batadv_priv *bat_priv,
struct sk_buff *skb,
int packet_subtype,
unsigned short vid)
+static inline int batadv_send_skb_tt_4addr(struct batadv_priv *bat_priv,
struct sk_buff *skb,
int packet_subtype,
unsigned short vid)
{
- return batadv_send_skb_generic_unicast(bat_priv, skb,
BATADV_UNICAST_4ADDR,
packet_subtype, vid);
- return batadv_send_skb_generic_tt(bat_priv, skb,
BATADV_UNICAST_4ADDR,
packet_subtype, vid);
}
I like this new API :) If you are ok with my suggestions then you can also add
Acked-by: Antonio Quartulli ordex@autistici.org
Cheers,
b.a.t.m.a.n@lists.open-mesh.org