Signed-off-by: Simon Wunderlich &lt;siwu(a)hrz.tu-chemnitz.de&gt; --- debug.c | 6 +++--- debug.h | 4 ++-- main.c | 50 ++++++++++++++++++++++++++++---------------------- man/batctl.8 | 7 +++++-- sys.c | 12 ++++++++++++ sys.h | 2 ++ 6 files changed, 52 insertions(+), 29 deletions(-) diff --git a/debug.c b/debug.c index 6a553ff..155f499 100644 --- a/debug.c +++ b/debug.c @@ -61,13 +61,13 @@ void trans_global_usage(void) printf(" \t -w [interval] watch mode - refresh the global translation table continuously\n"); } -void softif_neigh_usage(void) +void bla_claim_table_usage(void) { - printf("Usage: batctl [options] softif_neigh \n"); + printf("Usage: batctl [options] claimtable \n"); printf("options:\n"); printf(" \t -h print this help\n"); printf(" \t -n don't replace mac addresses with bat-host names\n"); - printf(" \t -w [interval] watch mode - refresh the soft-interface neighbor table continuously\n"); + printf(" \t -w [interval] watch mode - refresh the bridge loop avoidance claim table continuously\n"); } void gateways_usage(void) diff --git a/debug.h b/debug.h index 939f281..50d0e24 100644 --- a/debug.h +++ b/debug.h @@ -24,7 +24,7 @@ #define DEBUG_ORIGINATORS "originators" #define DEBUG_TRANSTABLE_LOCAL "transtable_local" #define DEBUG_TRANSTABLE_GLOBAL "transtable_global" -#define DEBUG_SOFTIF_NEIGH "softif_neigh" +#define DEBUG_BLA_CLAIM_TABLE "bla_claim_table" #define DEBUG_GATEWAYS "gateways" #define DEBUG_VIS_DATA "vis_data" #define DEBUG_LOG "log" @@ -32,7 +32,7 @@ void originators_usage(void); void trans_local_usage(void); void trans_global_usage(void); -void softif_neigh_usage(void); +void bla_claim_table_usage(void); void gateways_usage(void); int handle_debug_table(char *mesh_iface, int argc, char **argv, char *file_path, void table_usage(void)); diff --git a/main.c b/main.c index 0dfdb8e..86e2078 100644 --- a/main.c +++ b/main.c @@ -45,27 +45,28 @@ char module_ver_path[] = "/sys/module/batman_adv/version"; void print_usage(void) { printf("Usage: batctl [options] commands \n"); printf("commands:\n"); - printf(" \tinterface|if [add|del iface(s)]\tdisplay or modify the interface settings\n"); - printf(" \toriginators|o \tdisplay the originator table\n"); - printf(" \tinterval|it [orig_interval] \tdisplay or modify the originator interval (in ms)\n"); - printf(" \tloglevel|ll [level] \tdisplay or modify the log level\n"); - printf(" \tlog|l \tread the log produced by the kernel module\n"); - printf(" \tgw_mode|gw [mode] \tdisplay or modify the gateway mode\n"); - printf(" \tgateways|gwl \tdisplay the gateway server list\n"); - printf(" \ttranslocal|tl \tdisplay the local translation table\n"); - printf(" \ttransglobal|tg \tdisplay the global translation table\n"); - printf(" \tsoftif_neigh|sn \tdisplay the soft-interface neighbor table\n"); - printf(" \tvis_mode|vm [mode] \tdisplay or modify the status of the VIS server\n"); - printf(" \tvis_data|vd [dot|JSON] \tdisplay the VIS data in dot or JSON format\n"); - printf(" \taggregation|ag [0|1] \tdisplay or modify the packet aggregation setting\n"); - printf(" \tbonding|b [0|1] \tdisplay or modify the bonding mode setting\n"); - printf(" \tfragmentation|f [0|1] \tdisplay or modify the fragmentation mode setting\n"); - printf(" \tap_isolation|ap [0|1] \tdisplay or modify the ap isolation mode setting\n"); + printf(" \tinterface|if [add|del iface(s)]\tdisplay or modify the interface settings\n"); + printf(" \toriginators|o \tdisplay the originator table\n"); + printf(" \tinterval|it [orig_interval] \tdisplay or modify the originator interval (in ms)\n"); + printf(" \tloglevel|ll [level] \tdisplay or modify the log level\n"); + printf(" \tlog|l \tread the log produced by the kernel module\n"); + printf(" \tgw_mode|gw [mode] \tdisplay or modify the gateway mode\n"); + printf(" \tgateways|gwl \tdisplay the gateway server list\n"); + printf(" \ttranslocal|tl \tdisplay the local translation table\n"); + printf(" \ttransglobal|tg \tdisplay the global translation table\n"); + printf(" \tclaimtable|cl \tdisplay the bridge loop avoidance claim table\n"); + printf(" \tvis_mode|vm [mode] \tdisplay or modify the status of the VIS server\n"); + printf(" \tvis_data|vd [dot|JSON] \tdisplay the VIS data in dot or JSON format\n"); + printf(" \taggregation|ag [0|1] \tdisplay or modify the packet aggregation setting\n"); + printf(" \tbonding|b [0|1] \tdisplay or modify the bonding mode setting\n"); + printf(" \tbridge_loop_avoidance|bl [0|1] \tdisplay or modify the bridge loop avoidance setting\n"); + printf(" \tfragmentation|f [0|1] \tdisplay or modify the fragmentation mode setting\n"); + printf(" \tap_isolation|ap [0|1] \tdisplay or modify the ap isolation mode setting\n"); printf("\n"); - printf(" \tping|p <destination> \tping another batman adv host via layer 2\n"); - printf(" \ttraceroute|tr <destination> \ttraceroute another batman adv host via layer 2\n"); - printf(" \ttcpdump|td <interface> \ttcpdump layer 2 traffic on the given interface\n"); - printf(" \tbisect <file1> .. <fileN>\tanalyze given log files for routing stability\n"); + printf(" \tping|p <destination> \tping another batman adv host via layer 2\n"); + printf(" \ttraceroute|tr <destination> \ttraceroute another batman adv host via layer 2\n"); + printf(" \ttcpdump|td <interface> \ttcpdump layer 2 traffic on the given interface\n"); + printf(" \tbisect <file1> .. <fileN>\tanalyze given log files for routing stability\n"); printf("options:\n"); printf(" \t-m mesh interface (default 'bat0')\n"); printf(" \t-h print this help (or 'batctl <command> -h' for the command specific help)\n"); @@ -151,10 +152,10 @@ int main(int argc, char **argv) ret = handle_debug_table(mesh_iface, argc - 1, argv + 1, DEBUG_TRANSTABLE_GLOBAL, trans_global_usage); - } else if ((strcmp(argv[1], "softif_neigh") == 0) || (strcmp(argv[1], "sn") == 0)) { + } else if ((strcmp(argv[1], "claimtable") == 0) || (strcmp(argv[1], "cl") == 0)) { ret = handle_debug_table(mesh_iface, argc - 1, argv + 1, - DEBUG_SOFTIF_NEIGH, softif_neigh_usage); + DEBUG_BLA_CLAIM_TABLE, bla_claim_table_usage); } else if ((strcmp(argv[1], "loglevel") == 0) || (strcmp(argv[1], "ll") == 0)) { @@ -197,6 +198,11 @@ int main(int argc, char **argv) ret = handle_sys_setting(mesh_iface, argc - 1, argv + 1, SYS_BONDING, bonding_usage, sysfs_param_enable); + } else if ((strcmp(argv[1], "bridge_loop_avoidance") == 0) || (strcmp(argv[1], "bl") == 0)) { + + ret = handle_sys_setting(mesh_iface, argc - 1, argv + 1, + SYS_BRIDGE_LOOP_AVOIDANCE, bridge_loop_avoidance_usage, sysfs_param_enable); + } else if ((strcmp(argv[1], "fragmentation") == 0) || (strcmp(argv[1], "f") == 0)) { ret = handle_sys_setting(mesh_iface, argc - 1, argv + 1, diff --git a/man/batctl.8 b/man/batctl.8 index 0cf0a7b..f45a070 100644 --- a/man/batctl.8 +++ b/man/batctl.8 @@ -121,8 +121,8 @@ Display the local translation table. batctl will refresh the list every second i .IP "\fBtransglobal\fP|\fBtg\fP [\fB\-w\fP [\fI\interval\fP]][\fB\-n\fP]" Display the global translation table. batctl will refresh the list every second if the "\-w" option was given or add a number to let it refresh at a custom interval in seconds (with optional decimal places). Use "\-n" to let batctl not replace the MAC addresses with bat\-host names in the output. .br -.IP "\fBsoftif_neigh\fP|\fBsn\fP [\fB\-w\fP [\fI\interval\fP]][\fB\-n\fP]" -Display the soft\-interface neighbor table. batctl will refresh the list every second if the "\-w" option was given or add a number to let it refresh at a custom interval in seconds (with optional decimal places). Use "\-n" to let batctl not replace the MAC addresses with bat\-host names in the output. +.IP "\fBclaimtable\fP|\fBcl\fP [\fB\-w\fP [\fI\interval\fP]][\fB\-n\fP]" +Display the bridge loop avoidance claim table. batctl will refresh the list every second if the "\-w" option was given or add a number to let it refresh at a custom interval in seconds (with optional decimal places). Use "\-n" to let batctl not replace the MAC addresses with bat\-host names in the output. .br .IP "\fBvis_mode|vm\fP [\fBmode\fP]\fP" If no parameter is given the current vis mode is displayed otherwise the parameter is used to set the vis mode. @@ -149,6 +149,9 @@ If no parameter is given the current aggregation setting is displayed. Otherwise .IP "\fBbonding\fP|\fBb\fP [\fB1\fP|\fB0\fP]" If no parameter is given the current bonding mode setting is displayed. Otherwise the parameter is used to enable or disable the bonding mode. .br +.IP "\fBbridge_loop_avoidance\fP|\fBbl\fP [\fB1\fP|\fB0\fP]" +If no parameter is given the current bridge loop avoidance setting is displayed. Otherwise the parameter is used to enable or disable the bridge loop avoidance. +.br .IP "\fBfragmentation\fP|\fBf\fP [\fB1\fP|\fB0\fP]" If no parameter is given the current fragmentation mode setting is displayed. Otherwise the parameter is used to enable or disable fragmentation. .br diff --git a/sys.c b/sys.c index 0263ae7..6cf4714 100644 --- a/sys.c +++ b/sys.c @@ -183,6 +183,7 @@ static void log_level_usage(void) printf(" \t batman Messages related to routing / flooding / broadcasting\n"); printf(" \t routes Messages related to route added / changed / deleted\n"); printf(" \t tt Messages related to translation table operations\n"); + printf(" \t bla Messages related to bridge loop avoidance\n"); } int handle_loglevel(char *mesh_iface, int argc, char **argv) @@ -221,6 +222,8 @@ int handle_loglevel(char *mesh_iface, int argc, char **argv) log_level |= (1 << 1); else if (strcmp(argv[i], "tt") == 0) log_level |= (1 << 2); + else if (strcmp(argv[i], "bla") == 0) + log_level |= (1 << 4); else { log_level_usage(); goto out; @@ -248,6 +251,8 @@ int handle_loglevel(char *mesh_iface, int argc, char **argv) "messages related to route added / changed / deleted", "routes"); printf("[%c] %s (%s)\n", (log_level & 4) ? 'x' : ' ', "messages related to translation table operations", "tt"); + printf("[%c] %s (%s)\n", (log_level & 8) ? 'x' : ' ', + "messages related to bridge loop avoidance", "bla"); out: if (errno == ENOENT) @@ -271,6 +276,13 @@ void bonding_usage(void) printf(" \t -h print this help\n"); } +void bridge_loop_avoidance_usage(void) +{ + printf("Usage: batctl [options] bridge_loop_avoidance [0|1]\n"); + printf("options:\n"); + printf(" \t -h print this help\n"); +} + void gw_mode_usage(void) { printf("Usage: batctl [options] gw_mode [mode] [sel_class|bandwidth]\n"); diff --git a/sys.h b/sys.h index 5dafe85..46a1159 100644 --- a/sys.h +++ b/sys.h @@ -25,6 +25,7 @@ #define SYS_LOG "log" #define SYS_AGGR "aggregated_ogms" #define SYS_BONDING "bonding" +#define SYS_BRIDGE_LOOP_AVOIDANCE "bridge_loop_avoidance" #define SYS_GW_MODE "gw_mode" #define SYS_GW_SEL "gw_sel_class" #define SYS_GW_BW "gw_bandwidth" @@ -47,6 +48,7 @@ extern const char *sysfs_param_server[]; void aggregation_usage(void); void bonding_usage(void); +void bridge_loop_avoidance_usage(void); void fragmentation_usage(void); void ap_isolation_usage(void); void gw_mode_usage(void); -- 1.7.8.3