Hi Jan, Aaron,
On 22 January 2013 11:37, L. Aaron Kaplan aaron@lo-res.org wrote:
On Jan 22, 2013, at 1:54 PM, Steve Song steve@villagetelco.org wrote:
Hi all,
A colleague of mine is building a batman-adv mesh network in an apartment building with essentially one node per apartment. Not surprisingly, results in a very dense mesh with each node having a large number of neighbours. Here is a typical batctl o output http://pastebin.com/aAR43hj7 This results in some fairly slow connections.
I am seeking some general advice on how to optimise batman-adv in the context of a dense mesh. Options that we have considered include turning the radio transmit power down on all of the devices and/or alternating channels on different floors (e.g. 1,6,11,1,6,11,etc). However, it is not clear to us what is the best strategy in this context. Grateful for any tips or suggestions you may have.
Thanks in advance.... Steve Song
Hi Steve,
The following is my experience.
Optimise layer 1 by: *) proper channel assignments *) reduce txpower *) dont's send when you don't have to send *) use spacial separation of frequencies and directionality if possible (ok, this is more of a general advice, won't matter so much in apartments) *) most importantly: use 802.11n!
Many thanks both for the practical advice.
For better or worse we are constrained by the fact that this is a Mesh Potato network which obliges us to put a node in each apartment in order to provide phone services via the FXS port in the Mesh Potatoes. This is not really the kind of network the Mesh Potato was originally designed for but was chosen for the apartment building over copper wiring because of the wiring constraints specific to the building. I hope we'll be able to optimise this network for adequate performance.
Regards... Steve