In-Reply-To:
Hi,
The following patchset implements a stateless, TVLV capable batman-adv multicast packet type.
The new batman-adv multicast packet type allows to contain several originator destination MAC addresses within a TVLV. Routers on the way will potentially split the batman-adv multicast packet and adjust its tracker TVLV contents.
Routing decisions are still based on the selected BATMAN IV or BATMAN V routing algorithm. So this new batman-adv multicast packet type retains the same loop-free properties.
The purpose of this new packet type is to allow to forward an IP multicast packet with less transmissions / overhead than the multicast-via-multiple-unicasts approach. Or to reach a lot more destinations (currently up to 196, depending on the payload size, see Wiki documentation for details) than with the default multicast fanout for the via-unicasts approach.
This will allow using applications like mDNS again in several Freifunk communities. And with less transmissions will also make more bulky multicast applications, like media streaming (to an assessable amount of receivers) a lot more feasible.
This approach is way simpler than the original multicast (tracker) packet approach we envisioned years ago. As it involves no maintenance of an extra, state based multicast routing table. However the TVLV capability should allow to extend things later, to split control and data plane a bit more for instance, to further increase the number of destinations, to further reduce overhead.
A compact overview can be found in the Wiki here, including limitations:
https://www.open-mesh.org/projects/batman-adv/wiki/Multicast-Packet-Type
Regards, Linus
---
Changelog v7: * PATCH 1/3: * rebased to current main/master branch (resolved net/multicast/routing.h) * renamed batadv_mcast_forw_orig_to_neigh() to batadv_orig_to_router() and moved it to originator.c, for reuse in fragmentation.c * added a SKB_LINEAR_ASSERT() to batadv_mcast_forw_packet() * adjusted batadv_mcast_forw_scrub_dests(): added a new macro that updates two dest pointers to avoid confusion due to two different updating methods, removed goto's and a little reordering * PATCH 2/3: * added SKB_LINEAR_ASSERT() to batadv_mcast_forw_scrape() * PATCH 3/3: * simplified batadv_mcast_forw_shrink_pack_dests(): moved parts to new sub function batadv_mcast_forw_shrink_fill(), removed keeping track of filler over the whole function (might be slower, as we might check+skip the same zero MAC entry multiple times, for each slot, but a lot easier to read - and we don't prioritize performance with this patchset yet)
Changelog v6: * PATCH 2/3: * add missing include of linux/compiler.h for the newly added likely() in v5 * added kerneldoc for @num_dests_pushed to the in v5 newly added batadv_mcast_forw_push_adjust_padding() * updated kerneldoc of batadv_mcast_forw_push_adjust_padding(), original text was wrongly copy & pasted from batadv_mcast_forw_push_est_padding() without adjustments * PATCH 3/3: * added missing "static" attribute to the newly added batadv_mcast_forw_shrink_align_offset() in v5
Changelog v5: * removed patches 1/5 + 2/5, as they were already applied * rebased to current main branch * changed padding behaviour: * now 2 bytes padding on the end of the multicast tracker TVLV, if number of destination nodes is even * as number of destination nodes might change between initial check until after pushing them, functions to post-adjust padding after pushing were added * added/fixed TTL handling * removed skb_pull() bailing from sub-functions of batadv_mcast_forw_push(), to only have a single skb_pull() to keep track of in batadv_mcast_forw_push() to revert the changes to the skb; instead a "unsigned short *tvlv_len" is passsed along in batadv_mcast_.*push.*() functions to keep track of how many bytes were pushed * moved + verified skb->ip_summed invalidation * batadv_mcast_forw_shrink_tracker() xmas tree ordering * reword batadv_mcast_forw_push_dest() "Return:" kerneldoc * fixed spelling: outter -> outer
Changelog v4: * PATCH 4/5: * add missing include for linux/types.h in multicast.h * add missing kerneldoc for @bat_priv in batadv_mcast_forw_push_dest() and batadv_mcast_forw_push_tvlvs() * use sizeof_field(type, field) instead of sizeof(((type *)0)->field) in batadv_mcast_forw_push_dest() * PATCH 5/5: * rename num_dests_remove to num_dests_reduce in batadv_mcast_forw_shrink_align_offse() to fix kerneldocs and for consistency * fix typo in kerneldoc in batadv_mcast_forw_shrink_update_headers() -> @num_dest_reduce -> @num_dests_reduce * use sizeof_field(type, field) instead of sizeof(((type *)0)->field) in batadv_mcast_forw_shrink_align_offset()
Changelog v3: * PATCH 1/5: * remove now obsolete includes * PATCH 2/5: * fix batadv_tvlv_handler_register() in network-coding.c * add missing include for linux/skbuff.h * move variable declarations out of the switch case in batadv_tvlv_call_handler() * PATCH 3/5: * remove unnecessary include of multicast.h in routing.c * add a few missing includes to multicast_forw.c (linux/byteorder/generic.h, linux/errno.h, linux/gfp.h, linux/stddef.h uapi/linux/batadv_packet.h, multicast.h) * PATCH 4/5: * add missing rcu_read_unlock() in error case before returning in batadv_mcast_forw_push_dests_list() * remove unnecessary include of soft-interface.h in multicast_forw.c * add a few missing includes to multicast_forw.c (linux/bug.h, linux/build_bug.h, linux/limits.h, linux/rculist.h, linux/rcupdate.h, linux/string.h) * make batadv_mcast_forw_mode_by_count() static * fix return types in the declaration of batadv_mcast_forw_packet_hdrlen() and batadv_mcast_forw_push() in multicast.h * fix typo in commit message: "that the are capable of" -> "that the*y* are capable of" * PATCH 5/5: * make batadv_mcast_forw_shrink_pack_dests() adhere to 80 characters per line for consistency * add a "continue" statement after the jump label in batadv_mcast_forw_shrink_pack_dests() to silence the sparse error "error: label at end of compound statement"
Changelog v2: * Add "[PATCH v2 0/5]" prefix to title of cover letter, so that Patchwork can hopefully find it - no other changes