Hello,
you are really great. Can't thank you enough for helping me with this problem.
If I understand it right batman_adv is loaded right after installing the image:
root@OpenWrt:/# lsmod Module Size Used by Not tainted batman_adv 51104 0 nf_nat_tftp 432 0 nf_conntrack_tftp 2400 1 nf_nat_tftp nf_nat_irc 864 0 nf_conntrack_irc 2592 1 nf_nat_irc nf_nat_ftp 1360 0 nf_conntrack_ftp 4896 1 nf_nat_ftp ipt_MASQUERADE 992 1 iptable_nat 2304 1 nf_nat 11824 5 nf_nat_tftp,nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat xt_NOTRACK 672 0 iptable_raw 656 1 xt_state 800 3 nf_conntrack_ipv4 7808 6 iptable_nat,nf_nat nf_defrag_ipv4 608 1 nf_conntrack_ipv4 nf_conntrack 42560 12 nf_nat_tftp,nf_conntrack_tftp,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_NOTRACK,xt_state,nf_conntrack_ipv4 pppoe 10208 0 pppox 1312 1 pppoe ipt_REJECT 1984 2 xt_TCPMSS 1952 1 ipt_LOG 4640 0 xt_comment 464 0 xt_multiport 1904 0 xt_mac 576 0 xt_limit 1152 1 iptable_mangle 992 0 iptable_filter 768 1 ip_tables 8864 4 iptable_nat,iptable_raw,iptable_mangle,iptable_filter xt_tcpudp 1856 4 x_tables 9840 13 ipt_MASQUERADE,iptable_nat,xt_NOTRACK,xt_state,ipt_REJECT,xt_TCPMSS,ipt_LOG,xt_comment,xt_multiport,xt_mac,xt_limit,ip_tables,xt_tcpudp ppp_async 9040 0 ppp_generic 21200 3 pppoe,pppox,ppp_async slhc 5360 1 ppp_generic b43legacy 97328 0 b43 153392 0 mac80211 210464 2 b43legacy,b43 crc_ccitt 976 1 ppp_async cfg80211 128144 3 b43legacy,b43,mac80211 compat_firmware_class 5520 2 b43legacy,b43 compat 752 0 arc4 816 2 aes_generic 31056 0 deflate 1328 0 ecb 1328 2 cbc 2016 0 switch_robo 4048 0 switch_core 5200 1 switch_robo diag 7504 0"
This is the batman-adv config file, also directly after installing the image: "config 'mesh' 'bat0' option 'interfaces' 'wlan0' option 'orig_interval' option 'log_level' option 'aggregate_ogm' option 'vis_mode'"
Here is my logread output (batman-adv:B.A.T.M.A.N. advanced 2010.0.0 (compatibility version 8) loaded):
"root@OpenWrt:/# logread Jan 1 00:00:16 OpenWrt syslog.info syslogd started: BusyBox v1.15.3 Jan 1 00:00:16 OpenWrt user.notice kernel: klogd started: BusyBox v1.15.3 (2010-08-10 01:43:28 CEST) Jan 1 00:00:16 OpenWrt user.notice kernel: Linux version 2.6.32.16 (jonathan@winme-mesh1) (gcc version 4.3.3 (GCC) ) #1 Tue Aug 10 02:14:13 CEST 2010 Jan 1 00:00:16 OpenWrt user.info kernel: CPU revision is: 00029008 (Broadcom BCM3302) Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243) Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x09, vendor 0x4243) Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 2 found: MIPS 3302 (cc 0x816, rev 0x06, vendor 0x4243) Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 3 found: USB 1.1 Host (cc 0x817, rev 0x02, vendor 0x4243) Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 4 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243) Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 6 found: Roboswitch (cc 0x81C, rev 0x02, vendor 0x4243) Jan 1 00:00:16 OpenWrt user.info kernel: ssb: Initializing MIPS core... Jan 1 00:00:16 OpenWrt user.info kernel: ssb: set_irq: core 0x0806, irq 4 => 4 Jan 1 00:00:16 OpenWrt user.info kernel: ssb: set_irq: core 0x0816, irq 5 => 2 Jan 1 00:00:16 OpenWrt user.info kernel: ssb: set_irq: core 0x0812, irq 2 => 5 Jan 1 00:00:16 OpenWrt user.info kernel: ssb: after irq reconfiguration Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0817, irq : 2(S) 3 4 5 6* D I Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I* Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0812, irq : 2(S) 3 4 5* 6 D I Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x081c, irq : 2(S) 3 4 5 6 D I* Jan 1 00:00:16 OpenWrt user.info kernel: ssb: Sonics Silicon Backplane found at address 0x18000000 Jan 1 00:00:16 OpenWrt user.warn kernel: Serial init done. Jan 1 00:00:16 OpenWrt user.info kernel: Determined physical RAM map: Jan 1 00:00:16 OpenWrt user.info kernel: memory: 01000000 @ 00000000 (usable) Jan 1 00:00:16 OpenWrt user.info kernel: Initrd not found or empty - disabling initrd Jan 1 00:00:16 OpenWrt user.warn kernel: Zone PFN ranges: Jan 1 00:00:16 OpenWrt user.warn kernel: Normal 0x00000000 -> 0x00001000 Jan 1 00:00:16 OpenWrt user.warn kernel: Movable zone start PFN for each node Jan 1 00:00:16 OpenWrt user.warn kernel: early_node_map[1] active PFN ranges Jan 1 00:00:16 OpenWrt user.warn kernel: 0: 0x00000000 -> 0x00001000 Jan 1 00:00:16 OpenWrt user.debug kernel: On node 0 totalpages: 4096 Jan 1 00:00:16 OpenWrt user.debug kernel: free_area_init_node: node 0, pgdat 80283b50, node_mem_map 802c9000 Jan 1 00:00:16 OpenWrt user.debug kernel: Normal zone: 32 pages used for memmap Jan 1 00:00:16 OpenWrt user.debug kernel: Normal zone: 0 pages reserved Jan 1 00:00:16 OpenWrt user.debug kernel: Normal zone: 4064 pages, LIFO batch:0 Jan 1 00:00:16 OpenWrt user.warn kernel: Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 Jan 1 00:00:16 OpenWrt user.notice kernel: Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 Jan 1 00:00:16 OpenWrt user.info kernel: PID hash table entries: 64 (order: -4, 256 bytes) Jan 1 00:00:16 OpenWrt user.info kernel: Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 1 00:00:16 OpenWrt user.info kernel: Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 1 00:00:16 OpenWrt user.warn kernel: Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes. Jan 1 00:00:16 OpenWrt user.warn kernel: Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes Jan 1 00:00:16 OpenWrt user.info kernel: Memory: 13372k/16384k available (2222k kernel code, 3012k reserved, 350k data, 136k init, 0k highmem) Jan 1 00:00:16 OpenWrt user.info kernel: Hierarchical RCU implementation. Jan 1 00:00:16 OpenWrt user.info kernel: NR_IRQS:128 Jan 1 00:00:16 OpenWrt user.info kernel: console [ttyS0] enabled Jan 1 00:00:16 OpenWrt user.info kernel: Calibrating delay loop... 199.16 BogoMIPS (lpj=398336) Jan 1 00:00:16 OpenWrt user.warn kernel: Mount-cache hash table entries: 512 Jan 1 00:00:16 OpenWrt user.info kernel: NET: Registered protocol family 16 Jan 1 00:00:16 OpenWrt user.warn kernel: bio: create slab <bio-0> at 0 Jan 1 00:00:16 OpenWrt user.info kernel: Switching to clocksource MIPS Jan 1 00:00:16 OpenWrt user.info kernel: NET: Registered protocol family 2 Jan 1 00:00:16 OpenWrt user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 1 00:00:16 OpenWrt user.info kernel: TCP established hash table entries: 512 (order: 0, 4096 bytes) Jan 1 00:00:16 OpenWrt user.info kernel: TCP bind hash table entries: 512 (order: -1, 2048 bytes) Jan 1 00:00:16 OpenWrt user.info kernel: TCP: Hash tables configured (established 512 bind 512) Jan 1 00:00:16 OpenWrt user.info kernel: TCP reno registered Jan 1 00:00:16 OpenWrt user.info kernel: NET: Registered protocol family 1 Jan 1 00:00:16 OpenWrt user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Jan 1 00:00:16 OpenWrt user.warn kernel: Registering mini_fo version $Id$ Jan 1 00:00:16 OpenWrt user.info kernel: JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. Jan 1 00:00:16 OpenWrt user.info kernel: msgmni has been set to 26 Jan 1 00:00:16 OpenWrt user.info kernel: io scheduler noop registered Jan 1 00:00:16 OpenWrt user.info kernel: io scheduler deadline registered (default) Jan 1 00:00:16 OpenWrt user.info kernel: Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled Jan 1 00:00:16 OpenWrt user.info kernel: serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A Jan 1 00:00:16 OpenWrt user.info kernel: serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A Jan 1 00:00:16 OpenWrt user.info kernel: serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A Jan 1 00:00:16 OpenWrt user.info kernel: serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A Jan 1 00:00:16 OpenWrt user.warn kernel: flash init: 0x1c000000 0x02000000 Jan 1 00:00:16 OpenWrt user.info kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 Jan 1 00:00:16 OpenWrt user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040 Jan 1 00:00:16 OpenWrt user.notice kernel: number of CFI chips: 1 Jan 1 00:00:16 OpenWrt user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Jan 1 00:00:16 OpenWrt user.notice kernel: Flash device: 0x400000 at 0x1fc00000 Jan 1 00:00:16 OpenWrt user.notice kernel: bootloader size: 262144 Jan 1 00:00:16 OpenWrt user.warn kernel: Updating TRX offsets and length: Jan 1 00:00:16 OpenWrt user.warn kernel: old trx = [0x0000001c, 0x00000974, 0x000d2000], len=0x00271000 crc32=0x65c67278 Jan 1 00:00:16 OpenWrt user.warn kernel: new trx = [0x0000001c, 0x00000974, 0x000d2000], len=0x000d2000 crc32=0x7f60a9cc Jan 1 00:00:16 OpenWrt user.warn kernel: Done Jan 1 00:00:16 OpenWrt user.notice kernel: Creating 4 MTD partitions on "Physically mapped flash": Jan 1 00:00:16 OpenWrt user.notice kernel: 0x000000000000-0x000000040000 : "cfe" Jan 1 00:00:16 OpenWrt user.notice kernel: 0x000000040000-0x0000003f0000 : "linux" Jan 1 00:00:16 OpenWrt user.notice kernel: 0x000000112000-0x0000003f0000 : "rootfs" Jan 1 00:00:16 OpenWrt user.warn kernel: mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only Jan 1 00:00:16 OpenWrt user.notice kernel: mtd: partition "rootfs" set to be root filesystem Jan 1 00:00:16 OpenWrt user.info kernel: mtd: partition "rootfs_data" created automatically, ofs=290000, len=160000 Jan 1 00:00:16 OpenWrt user.notice kernel: 0x000000290000-0x0000003f0000 : "rootfs_data" Jan 1 00:00:16 OpenWrt user.notice kernel: 0x0000003f0000-0x000000400000 : "nvram" Jan 1 00:00:17 OpenWrt user.info kernel: b44.c:v2.0 Jan 1 00:00:17 OpenWrt user.info kernel: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:25:9c:3c:46:04 Jan 1 00:00:17 OpenWrt user.info kernel: BCM47xx Watchdog Timer enabled (30 seconds, nowayout) Jan 1 00:00:17 OpenWrt user.info kernel: TCP westwood registered Jan 1 00:00:17 OpenWrt user.info kernel: NET: Registered protocol family 17 Jan 1 00:00:17 OpenWrt user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com Jan 1 00:00:17 OpenWrt user.info kernel: All bugs added by David S. Miller davem@redhat.com Jan 1 00:00:17 OpenWrt user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Jan 1 00:00:17 OpenWrt user.info kernel: Freeing unused kernel memory: 136k freed Jan 1 00:00:17 OpenWrt user.warn kernel: Please be patient, while OpenWrt loads ... Jan 1 00:00:17 OpenWrt user.warn kernel: diag: Detected 'Linksys WRT54G/GS/GL' Jan 1 00:00:17 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex. Jan 1 00:00:17 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX. Jan 1 00:00:17 OpenWrt user.info kernel: roboswitch: Probing device eth0: found a 5325! It's a 5350. Jan 1 00:00:17 OpenWrt user.info kernel: mini_fo: using base directory: / Jan 1 00:00:17 OpenWrt user.info kernel: mini_fo: using storage directory: /tmp/root Jan 1 00:00:17 OpenWrt user.info kernel: b44: eth0: powering down PHY Jan 1 00:00:18 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex. Jan 1 00:00:18 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX. Jan 1 00:00:21 OpenWrt user.info kernel: device eth0.0 entered promiscuous mode Jan 1 00:00:21 OpenWrt user.info kernel: device eth0 entered promiscuous mode Jan 1 00:00:21 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering forwarding state Jan 1 00:00:21 OpenWrt user.info kernel: Compat-wireless backport release: compat-wireless-2010-07-13-4-g04898a5 Jan 1 00:00:21 OpenWrt user.info kernel: Backport based on wireless-2.6.git v2.6.35-rc6-48432-gdce358e Jan 1 00:00:22 OpenWrt user.info kernel: cfg80211: Calling CRDA to update world regulatory domain Jan 1 00:00:26 OpenWrt user.info kernel: b43-phy0: Broadcom 5352 WLAN found (core revision 9) Jan 1 00:00:27 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'minstrel' Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::tx Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::rx Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::radio Jan 1 00:00:27 OpenWrt user.info kernel: Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] Jan 1 00:00:28 OpenWrt user.info kernel: Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ] Jan 1 00:00:28 OpenWrt user.info kernel: cfg80211: World regulatory domain updated: Jan 1 00:00:28 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 1 00:00:28 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 1 00:00:28 OpenWrt user.info kernel: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Jan 1 00:00:28 OpenWrt user.info kernel: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Jan 1 00:00:28 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 1 00:00:28 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 1 00:00:28 OpenWrt user.info kernel: PPP generic driver version 2.4.2 Jan 1 00:00:29 OpenWrt user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jan 1 00:00:30 OpenWrt user.info kernel: NET: Registered protocol family 24 Jan 1 00:00:30 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (211 buckets, 844 max) Jan 1 00:00:32 OpenWrt user.info kernel: batman-adv:B.A.T.M.A.N. advanced 2010.0.0 (compatibility version 8) loaded Jan 1 00:00:34 OpenWrt user.info sysinit: Loading defaults Jan 1 00:00:35 OpenWrt user.info sysinit: Loading synflood protection Jan 1 00:00:36 OpenWrt user.info sysinit: Adding custom chains Jan 1 00:00:36 OpenWrt user.info sysinit: Loading zones Jan 1 00:00:37 OpenWrt user.info sysinit: Loading forwarding Jan 1 00:00:38 OpenWrt user.info sysinit: Loading redirects Jan 1 00:00:38 OpenWrt user.info sysinit: Loading rules Jan 1 00:00:38 OpenWrt user.info sysinit: Loading includes Jan 1 00:00:38 OpenWrt user.info sysinit: Loading zone defaults Jan 1 00:00:39 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan Jan 1 00:00:41 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: started, version 2.55 cachesize 150 Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: using local addresses only for domain lan Jan 1 00:00:45 OpenWrt daemon.warn dnsmasq[809]: no servers found in /tmp/resolv.conf.auto, will retry Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: read /etc/hosts - 1 addresses Jan 1 00:00:45 OpenWrt user.info kernel: batman-adv:Adding interface: wlan0 Jan 1 00:00:45 OpenWrt user.err kernel: batman-adv:Not using interface wlan0 (retrying later): interface not active Jan 1 00:00:46 OpenWrt user.warn kernel: jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 Jan 1 00:00:46 OpenWrt user.warn kernel: jffs2_build_filesystem(): unlocking the mtd device... done. Jan 1 00:01:00 OpenWrt user.warn kernel: jffs2_build_filesystem(): erasing all blocks after the end marker... done. Jan 1 00:01:00 OpenWrt user.info sysinit: copying files ... done Jan 1 00:01:00 OpenWrt user.info kernel: mini_fo: using base directory: / Jan 1 00:01:00 OpenWrt user.info kernel: mini_fo: using storage directory: /overlay"
I disabled the batman-adv module with "rmmod batman-adv", checked if it is really disabled via "lsmod" and then avtivating radio0 through removing "option disabled 1" in "/etc/config/wireless". Restarting the network works fine without any segmentation faults. After thet I reloaded the batman-adv module and did "/etc/init.d/network restart" again and this time it showed an segmentation fault again.
"root@OpenWrt:/# /etc/init.d/network restart Received SIGTERM Entering released state udhcpc (v1.15.3) started Sending discover... Configuration file: /var/run/hostapd-phy0.conf Segmentation fault Failed to start hostapd for phy0 root@OpenWrt:/# Sending discover... Sending discover..."
Here is the dmesg output after that Segmentation fault: "root@OpenWrt:/# dmesg Linux version 2.6.32.16 (jonathan@winme-mesh1) (gcc version 4.3.3 (GCC) ) #1 Tue Aug 10 02:14:13 CEST 2010 CPU revision is: 00029008 (Broadcom BCM3302) ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243) ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x09, vendor 0x4243) ssb: Core 2 found: MIPS 3302 (cc 0x816, rev 0x06, vendor 0x4243) ssb: Core 3 found: USB 1.1 Host (cc 0x817, rev 0x02, vendor 0x4243) ssb: Core 4 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243) ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) ssb: Core 6 found: Roboswitch (cc 0x81C, rev 0x02, vendor 0x4243) ssb: Initializing MIPS core... ssb: set_irq: core 0x0806, irq 4 => 4 ssb: set_irq: core 0x0816, irq 5 => 2 ssb: set_irq: core 0x0812, irq 2 => 5 ssb: after irq reconfiguration ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I ssb: core 0x0817, irq : 2(S) 3 4 5 6* D I ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I* ssb: core 0x0812, irq : 2(S) 3 4 5* 6 D I ssb: core 0x081c, irq : 2(S) 3 4 5 6 D I* ssb: Sonics Silicon Backplane found at address 0x18000000 Serial init done. Determined physical RAM map: memory: 01000000 @ 00000000 (usable) Initrd not found or empty - disabling initrd Zone PFN ranges: Normal 0x00000000 -> 0x00001000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00001000 On node 0 totalpages: 4096 free_area_init_node: node 0, pgdat 80283b50, node_mem_map 802c9000 Normal zone: 32 pages used for memmap Normal zone: 0 pages reserved Normal zone: 4064 pages, LIFO batch:0 Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 PID hash table entries: 64 (order: -4, 256 bytes) Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes. Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes Memory: 13372k/16384k available (2222k kernel code, 3012k reserved, 350k data, 136k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS:128 console [ttyS0] enabled Calibrating delay loop... 199.16 BogoMIPS (lpj=398336) Mount-cache hash table entries: 512 NET: Registered protocol family 16 bio: create slab <bio-0> at 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) TCP reno registered NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 26 io scheduler noop registered io scheduler deadline registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A flash init: 0x1c000000 0x02000000 Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Flash device: 0x400000 at 0x1fc00000 bootloader size: 262144 Updating TRX offsets and length: old trx = [0x0000001c, 0x00000974, 0x000d2000], len=0x00271000 crc32=0x65c67278 new trx = [0x0000001c, 0x00000974, 0x000d2000], len=0x000d2000 crc32=0x7f60a9cc Done Creating 4 MTD partitions on "Physically mapped flash": 0x000000000000-0x000000040000 : "cfe" 0x000000040000-0x0000003f0000 : "linux" 0x000000112000-0x0000003f0000 : "rootfs" mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=290000, len=160000 0x000000290000-0x0000003f0000 : "rootfs_data" 0x0000003f0000-0x000000400000 : "nvram" b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:25:9c:3c:46:04 BCM47xx Watchdog Timer enabled (30 seconds, nowayout) TCP westwood registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com All bugs added by David S. Miller davem@redhat.com VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 136k freed Please be patient, while OpenWrt loads ... diag: Detected 'Linksys WRT54G/GS/GL' b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. roboswitch: Probing device eth0: found a 5325! It's a 5350. mini_fo: using base directory: / mini_fo: using storage directory: /tmp/root b44: eth0: powering down PHY b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. device eth0.0 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.0) entering forwarding state Compat-wireless backport release: compat-wireless-2010-07-13-4-g04898a5 Backport based on wireless-2.6.git v2.6.35-rc6-48432-gdce358e cfg80211: Calling CRDA to update world regulatory domain b43-phy0: Broadcom 5352 WLAN found (core revision 9) phy0: Selected rate control algorithm 'minstrel' Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ] cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) PPP generic driver version 2.4.2 ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 24 nf_conntrack version 0.5.0 (211 buckets, 844 max) batman-adv:B.A.T.M.A.N. advanced 2010.0.0 (compatibility version 8) loaded batman-adv:Adding interface: wlan0 batman-adv:Not using interface wlan0 (retrying later): interface not active jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 jffs2_build_filesystem(): unlocking the mtd device... done. jffs2_build_filesystem(): erasing all blocks after the end marker... done. mini_fo: using base directory: / mini_fo: using storage directory: /overlay batman-adv:Removing interface: wlan0 br-lan: port 1(eth0.0) entering disabled state device eth0 left promiscuous mode device eth0.0 left promiscuous mode br-lan: port 1(eth0.0) entering disabled state device eth0.0 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.0) entering forwarding state b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) device wlan0 entered promiscuous mode br-lan: port 2(wlan0) entering forwarding state device wlan0 left promiscuous mode br-lan: port 2(wlan0) entering disabled state device wlan0 entered promiscuous mode br-lan: port 2(wlan0) entering forwarding state batman-adv:B.A.T.M.A.N. advanced 2010.0.0 (compatibility version 8) loaded br-lan: port 2(wlan0) entering disabled state br-lan: port 1(eth0.0) entering disabled state device eth0 left promiscuous mode device wlan0 left promiscuous mode br-lan: port 2(wlan0) entering disabled state device eth0.0 left promiscuous mode br-lan: port 1(eth0.0) entering disabled state device eth0.0 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.0) entering forwarding state device wlan0 entered promiscuous mode br-lan: port 2(wlan0) entering forwarding state device wlan0 left promiscuous mode br-lan: port 2(wlan0) entering disabled state b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) CPU 0 Unable to handle kernel paging request at virtual address 00003aa1, epc == 80a982f4, ra == 80a982dc Oops[#1]: Cpu 0 $ 0 : 00000000 10009800 3c9c2500 80d9e800 $ 4 : 803df888 00003a9e 00003a98 00000000 $ 8 : 00000004 00000001 00000000 fffffffb $12 : 0000000f 80238688 ffffffff 80c47bc8 $16 : 80435e80 80d9e800 80a9c314 80cd26c0 $20 : 00000008 7fd6fd80 7fd6fcd0 00000001 $24 : 0000003c 8f1bbcdc $28 : 80c46000 80c47d58 00475028 80a982dc Hi : 00000103 Lo : 68655100 epc : 80a982f4 0x80a982f4 Not tainted ra : 80a982dc 0x80a982dc Status: 10009803 KERNEL EXL IE Cause : 0080000c BadVA : 00003aa1 PrId : 00029008 (Broadcom BCM3302) Modules linked in: batman_adv nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc b43legacy b43 mac80211 crc_ccitt cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc switch_robo switch_core diag [last unloaded: batman_adv] Process hostapd (pid: 2057, threadinfo=80c46000, task=80739048, tls=00000000) Stack : 80435e80 80d9e800 80a9c314 80cd26c0 80435e80 80a98a5c 80e712a8 fffffff2 00000000 80d9e800 00000000 fffffff0 00000000 80d9e800 00000008 800430c0 00000000 80d9e800 00000000 801a2eb0 00000000 80d9e800 7fd6fcf0 00000000 80c47e18 8004325c 00000000 7fd6fcf0 00008914 00000000 00000000 ffffffed 80d9e800 801a6e18 802c4c90 801a7e40 00000000 0000001d 00008924 00008924 ... Call Trace:[<80a98a5c>] 0x80a98a5c [<800430c0>] 0x800430c0 [<801a2eb0>] 0x801a2eb0 [<8004325c>] 0x8004325c [<801a6e18>] 0x801a6e18 [<801a7e40>] 0x801a7e40 [<801a8aa4>] 0x801a8aa4 [<80190a00>] 0x80190a00 [<800a2858>] 0x800a2858 [<800a6270>] 0x800a6270 [<800a2f90>] 0x800a2f90 [<80192028>] 0x80192028 [<80191330>] 0x80191330 [<800a3034>] 0x800a3034 [<80192878>] 0x80192878 [<80003230>] 0x80003230
Code: 24c50006 88820003 98820000 <a8a20003> b8a20000 90830004 a0a30004 90820005 a0a20005 Disabling lock debugging due to kernel taint"
Hope all this info helps you, for me it's only confusing :)
With best regards, Tim