Thanks you very much.
I got run batman-adv and and I can see 2 nodes between them:
root@OpenWrt:/# batctl o [B.A.T.M.A.N. adv 2012.0.0, MainIF/MAC: wlan0/00:27:22:52:74:e2 (bat0)] Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... 00:27:22:52:71:a7 0.170s (213) 00:27:22:52:71:a7 [ wlan0]: 00:27:22:52:71:a7 (213)
I transfer with scp and installed manually the packages kmod-crc16_2.6.32.27-1_ar71xx.ipk and kmod-batman-adv_2.6.32.27+2012.0.0-1_ar71xx.ipk that i had created when compiled the image, and now all work OK
Thanks for your help! Now batman-adv seems really easy! ;-)
2012/8/1 Wayne Abroue plettpc@gmail.com:
On Wed, Aug 1, 2012 at 12:19 PM, Sven Eckelmann sven@narfation.org wrote:
On Tuesday 31 July 2012 11:41:15 Esteban Municio wrote:
Hi all
I`m working on a academic develop project for improve the networks in rural areas in Peru. We are doing some test with 6 Nanostation M5 for create a mesh network.
I tried Commotion software with OLSR and all was Ok. Now, we are testing BATMAN, with OpenWRT and batman-adv module, but I have some problems.
I have compiled OpenWrt Backfire r32751 (Load: 0.09 0.10 0.05) and installed batman-adv with opkg following this http://wiki.openwrt.org/inbox/mesh.batman
Why are you installing it with opkg? This sounds a little bit like you try to load a kernel module that wasn't compiled for the kernel that is running on the machine (which would be extreme bad when there are ABI differences). Also this "pizza" link you showed at the bottom of the mail gives the impression that you may have done something like that.
The best way is to include it in your image.
When I put: lsmod | grep batman I get batman_adv 67936 0
and seems to be load in the kernel
But when I try to add the interface wlan0 for activate batman in it, the Nanostation remains locked and i need to reboot. I have tried this with:
echo bat0 > /sys/class/net/wlan0/batman_adv/mesh_iface
and
batctl if add wlan0
with the same bad result. What am i doing wrong?
Hard to tell with the information we got here. Are you using the serial console on your device? Does it print a backtrace (can you create a backtrace with symbol tables enabled)? Are you sure that the kernel and batman-adv module are 100% binary compatible? What version of batman-adv is it? Did you try the newest openwrt devel package from http://downloads.open-mesh.org/svn/openwrt-feed/ (i think the package is called kmod-batman-adv-devel)?
batctl: acd06db051419d3b323675ab2d7c897f2a5efc2a batman-adv: 3fdeaa6bfb404311b73a689e984672161403a0c2
[...]
I have noticed that i have not the bat0 interface created,is it normal? Do i need create another aditional interface like ath0?
bat0 (or any other name you choose for your batman-adv device(s)) are created after you attach an interface to it (this is what you are doing when you say that your node "freezes").
I have been following that manuals: http://pizza.hskflashcards.com/index.php?page=B.A.T.M.A.N.+Advanced+on+OpenW rt+How-To
Uh, please don't use this one. It is outdated as hell and has nearly nothing to do with the stuff you are using (or at least should use).
Do you recomend me to change to batmand instead?
Just to give an impression:
Latest release of batmand: http://git.open-mesh.org/batmand.git/commit/3aeebaf87974a069278a3feee31345da...
Latest release of batman-adv http://git.open-mesh.org/batman-adv.git/commit/b82d11e243ec144c515e7d04e8e8c...
Commits in batmand in the last 6 months (master branch): 0 Commits in batman-adv in the last 6 months (master branch): ~250 (and this does not include all the stuff that happens before a change is accepted)
Of course, this can also be a sign of perfection. But I can say for sure that the most development in the last two years happened in batman-adv and not in batmand.
Do you know if there is any BATMAN implementation for a mesh network of Nanostation M5, easier to install and manipulate?
Um, even easier? At least I find it extreme easy to get it running:
$ modprobe batman-adv $ batctl -m bat4 interface add eth0 $ ip addr add 192.168.3.11/24 dev bat4 $ ip link set dev bat4 up $ batctl -m bat4 originators
And only step 1 and 2 are batman-adv relevant. The rest is just to configure the usual stuff and step 5 to check for detected originators. And "-m bat4" is optional. I just wanted to call my device bat4. Please let me know how this can be made easier without restricting users.
And why are you refering to a specific product? I thought that you just use OpenWRT.
Yep, now that everybody has confused the hell out of you,,, try flashing the unit with http://downloads.openwrt.org/snapshots/trunk/atheros/openwrt-atheros-ubnt5-s...
setup to get internet access. and correct wireless settings opkg update | opkg install kmod-batman-adv | enable with /etc/init.d/batman-adv enable
edit /config/batman-adv to reflect wlan0
reboot Done | check with batctl o
Couldn't be simpler, no need to compile anything.
Wayne A