Hii,
I will make some test with BATMAN. My test scenario is very simple, it consists at the moment by a router and a Laptop.
My problem is, I cann't run Iperf to test the network. The ping response is also to high.
I start batmand on my laptop by " sudo batmand wlan0"
The Iperf test are broken after only 10-15 seconds...Here is my Iperf output: "[ 3] local 11.1.1.23 port 49672 connected with 129.217.186.46 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 5.0 sec 640 KBytes 1.05 Mbits/sec [ 3] 5.0-10.0 sec 640 KBytes 1.05 Mbits/sec [ 3] 10.0-15.0 sec 640 KBytes 1.05 Mbits/sec write2 failed: Network is down [ 3] 0.0-15.9 sec 1.98 MBytes 1.05 Mbits/sec [ 3] Sent 1415 datagrams [ 3] WARNING: did not receive ack of last datagram after 10 tries."
The ping results are: "64 bytes from 11.1.1.3: icmp_seq=1377 ttl=64 time=2.09 ms 64 bytes from 11.1.1.3: icmp_seq=1378 ttl=64 time=2.10 ms 64 bytes from 11.1.1.3: icmp_seq=1379 ttl=64 time=6.69 ms 64 bytes from 11.1.1.3: icmp_seq=1380 ttl=64 time=9.33 ms 64 bytes from 11.1.1.3: icmp_seq=1381 ttl=64 time=12.07 ms 64 bytes from 11.1.1.3: icmp_seq=1382 ttl=64 time=27.9 ms 64 bytes from 11.1.1.3: icmp_seq=1384 ttl=64 time=5.16 ms "
Can anybody help me to fix this problem... I didn't give a HNA on my router, could this be problem ?
I would be very appreciate, if anybody could help me..
greetings, E