[B.A.T.M.A.N.] DAT issue

Hi all!

I'm playing with OpenWRT and BATMAN advance and I had configured one essid to serve dynamic vlans via freeradius reply attributes.

I have a bridge (br0) with bat0, wireless and ethernet interface, and hostapd creates a new bridge by vlan (brvlanX) with vlanX and wlan1.X succefully. Br0 has configured a VLAN and IP to connect with every other nodes. There is the same explanation, but schematic:

Wireless:

phy0 -> wlan0 -> bat0 phy1 -> wlan1 -> wlan1.1 \ --> wlan1.N

Hostapd bridge:

wlan1 -> brvlan1 -> {wlan1.1; vlan1} \ --> brvlanN -> {wlan1.N; vlanN}

Ethernet bridge:

br0 -> {bat0; eth0; wlan1} \ --> br0.X == IP/NETMASK

When I look at batman dat table there aren't any registry, but variuos stations are connected. Why is that? What's wrong in my config?

Thanks a lot. Fernando.