Hello Dear Sir :
after i succeed to connect hostA to hostB at wifi environment this afternoon , and i config gateway between hostA and hostB,
i run avahi-autoipd bat0 at two host only ( not run dhcpcd ) and run batctl gw_mode server and batctl gw_mode server 5mbit/1mbit at hostA,
and run batctl gw_mode client and batctl gw_mode client 20 at hostB
Whether i need config dhcpcd at hostA ? if possible , please give me a example .
Thanks
--------------------------- HostB status
-------------------------- [root@alarmpi ~]# batctl gwl Gateway (#/255) Nexthop [outgoingIF]: advertised uplink bandwidth ... [B.A.T.M.A.N. adv 2015.2, MainIF/MAC: wlan0/c8:3a:35:c9:ce:71 (bat0)] => 00:b0:8c:e7:25:3a (248) 00:b0:8c:e7:25:3a [ wlan0]: 5.0/1.0 MBit
[root@alarmpi ~]# batctl gw_mode client (selection class: 20)
[B.A.T.M.A.N. adv 2015.2, MainIF/MAC: wlan0/c8:3a:35:c9:ce:71 (bat0 BATMAN_IV)] Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... 00:b0:8c:e7:25:3a 0.840s (229) 00:b0:8c:e7:25:3a [ wlan0]: 00:b0:8c:e7:25:3a (229)
--------------------------- HostA status
--------------------------
[root@alarmpi ~]# batctl gw_mode server (announced bw: 5.0/1.0 MBit) [root@alarmpi ~]# batctl o [B.A.T.M.A.N. adv 2015.2, MainIF/MAC: wlan0/00:b0:8c:e7:25:3a (bat0 BATMAN_IV)] Originator last-seen (#/255) Nexthop [outgoingIF]: Potential nexthops ... c8:3a:35:c9:ce:71 0.440s (239) c8:3a:35:c9:ce:71 [ wlan0]: c8:3a:35:c9:ce:71 (239) [root@alarmpi ~]# batctl gwl Gateway (#/255) Nexthop [outgoingIF]: advertised uplink bandwidth ... [B.A.T.M.A.N. adv 2015.2, MainIF/MAC: wlan0/00:b0:8c:e7:25:3a (bat0)] No gateways in range ..