From: Sven Eckelmann sven@narfation.org
Externally visible functions should be documented with kernel-doc. This usually refers to non-static functions but also static inline files in headers are visible in other files and should therefore be documented.
Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de --- net/batman-adv/bitarray.h | 7 +++- net/batman-adv/hard-interface.h | 6 +++ net/batman-adv/hash.h | 11 +++++- net/batman-adv/log.h | 35 +++++++++++++++++- net/batman-adv/main.h | 82 ++++++++++++++++++++++++++++++++++------- net/batman-adv/originator.h | 9 ++++- 6 files changed, 131 insertions(+), 19 deletions(-)
diff --git a/net/batman-adv/bitarray.h b/net/batman-adv/bitarray.h index 0508353fa28d..ca9d0753dd6b 100644 --- a/net/batman-adv/bitarray.h +++ b/net/batman-adv/bitarray.h @@ -47,7 +47,12 @@ static inline bool batadv_test_bit(const unsigned long *seq_bits, return test_bit(diff, seq_bits) != 0; }
-/* turn corresponding bit on, so we can remember that we got the packet */ +/** + * batadv_set_bit() - Turn corresponding bit on, so we can remember that we got + * the packet + * @seq_bits: bitmap of the packet receive window + * @n: relative sequence number of newly received packet + */ static inline void batadv_set_bit(unsigned long *seq_bits, s32 n) { /* if too old, just drop it */ diff --git a/net/batman-adv/hard-interface.h b/net/batman-adv/hard-interface.h index 1e61aacac539..de5e9a374ece 100644 --- a/net/batman-adv/hard-interface.h +++ b/net/batman-adv/hard-interface.h @@ -130,6 +130,12 @@ static inline void batadv_hardif_put(struct batadv_hard_iface *hard_iface) kref_put(&hard_iface->refcount, batadv_hardif_release); }
+/** + * batadv_primary_if_get_selected() - Get reference to primary interface + * @bat_priv: the bat priv with all the soft interface information + * + * Return: primary interface (with increased refcnt), otherwise NULL + */ static inline struct batadv_hard_iface * batadv_primary_if_get_selected(struct batadv_priv *bat_priv) { diff --git a/net/batman-adv/hash.h b/net/batman-adv/hash.h index 65396b126f3b..4ce1b6d3ad5c 100644 --- a/net/batman-adv/hash.h +++ b/net/batman-adv/hash.h @@ -121,8 +121,15 @@ static inline int batadv_hash_add(struct batadv_hashtable *hash, return ret; }
-/* removes data from hash, if found. data could be the structure you use with - * just the key filled, we just need the key for comparing. +/** + * batadv_hash_remove() - Removes data from hash, if found + * @hash: hash table + * @compare: callback to determine if 2 hash elements are identical + * @choose: callback calculating the hash index + * @data: data passed to the aforementioned callbacks as argument + * + * ata could be the structure you use with just the key filled, we just need + * the key for comparing. * * Return: returns pointer do data on success, so you can remove the used * structure yourself, or NULL on error diff --git a/net/batman-adv/log.h b/net/batman-adv/log.h index dd22e17b84b4..35e02b2b9e72 100644 --- a/net/batman-adv/log.h +++ b/net/batman-adv/log.h @@ -79,7 +79,14 @@ enum batadv_dbg_level { int batadv_debug_log(struct batadv_priv *bat_priv, const char *fmt, ...) __printf(2, 3);
-/* possibly ratelimited debug output */ +/** + * _batadv_dbg() - Store debug output with(out) ratelimiting + * @type: type of debug message + * @bat_priv: the bat priv with all the soft interface information + * @ratelimited: whether output should be rate limited + * @fmt: format string + * @arg...: variable arguments + */ #define _batadv_dbg(type, bat_priv, ratelimited, fmt, arg...) \ do { \ struct batadv_priv *__batpriv = (bat_priv); \ @@ -98,11 +105,30 @@ static inline void _batadv_dbg(int type __always_unused, } #endif
+/** + * batadv_dbg() - Store debug output without ratelimiting + * @type: type of debug message + * @bat_priv: the bat priv with all the soft interface information + * @arg...: format string and variable arguments + */ #define batadv_dbg(type, bat_priv, arg...) \ _batadv_dbg(type, bat_priv, 0, ## arg) + +/** + * batadv_dbg_ratelimited() - Store debug output with ratelimiting + * @type: type of debug message + * @bat_priv: the bat priv with all the soft interface information + * @arg...: format string and variable arguments + */ #define batadv_dbg_ratelimited(type, bat_priv, arg...) \ _batadv_dbg(type, bat_priv, 1, ## arg)
+/** + * batadv_info() - Store message in debug buffer and print it to kmsg buffer + * @net_dev: the soft interface net device + * @fmt: format string + * @arg...: variable arguments + */ #define batadv_info(net_dev, fmt, arg...) \ do { \ struct net_device *_netdev = (net_dev); \ @@ -110,6 +136,13 @@ static inline void _batadv_dbg(int type __always_unused, batadv_dbg(BATADV_DBG_ALL, _batpriv, fmt, ## arg); \ pr_info("%s: " fmt, _netdev->name, ## arg); \ } while (0) + +/** + * batadv_err() - Store error in debug buffer and print it to kmsg buffer + * @net_dev: the soft interface net device + * @fmt: format string + * @arg...: variable arguments + */ #define batadv_err(net_dev, fmt, arg...) \ do { \ struct net_device *_netdev = (net_dev); \ diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h index 633e6e41ba14..5ac86df48c42 100644 --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -298,40 +298,96 @@ static inline bool batadv_has_timed_out(unsigned long timestamp, return time_is_before_jiffies(timestamp + msecs_to_jiffies(timeout)); }
+/** + * batadv_atomic_dec_not_zero() - Decrease unless the number is 0 + * @v: pointer of type atomic_t + * + * Return: non-zero if v was not 0, and zero otherwise. + */ #define batadv_atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
-/* Returns the smallest signed integer in two's complement with the sizeof x */ +/** + * batadv_smallest_signed_int() - Returns the smallest signed integer in two's + * complement with the sizeof x + * @x: type of integer + * + * Return: smallest signed integer of type + */ #define batadv_smallest_signed_int(x) (1u << (7u + 8u * (sizeof(x) - 1u)))
-/* Checks if a sequence number x is a predecessor/successor of y. - * they handle overflows/underflows and can correctly check for a - * predecessor/successor unless the variable sequence number has grown by - * more then 2**(bitwidth(x)-1)-1. +/** + * batadv_seq_before() - Checks if a sequence number x is a predecessor of y + * @x: potential predecessor of @y + * @y: value to compare @x against + * + * It handles overflows/underflows and can correctly check for a predecessor + * unless the variable sequence number has grown by more then + * 2**(bitwidth(x)-1)-1. + * * This means that for a u8 with the maximum value 255, it would think: - * - when adding nothing - it is neither a predecessor nor a successor - * - before adding more than 127 to the starting value - it is a predecessor, - * - when adding 128 - it is neither a predecessor nor a successor, - * - after adding more than 127 to the starting value - it is a successor + * + * * when adding nothing - it is neither a predecessor nor a successor + * * before adding more than 127 to the starting value - it is a predecessor, + * * when adding 128 - it is neither a predecessor nor a successor, + * * after adding more than 127 to the starting value - it is a successor + * + * Return: true when x is a predecessor of y, false otherwise */ #define batadv_seq_before(x, y) ({typeof(x)_d1 = (x); \ typeof(y)_d2 = (y); \ typeof(x)_dummy = (_d1 - _d2); \ (void)(&_d1 == &_d2); \ _dummy > batadv_smallest_signed_int(_dummy); }) + +/** + * batadv_seq_after() - Checks if a sequence number x is a successor of y + * @x: potential sucessor of @y + * @y: value to compare @x against + * + * It handles overflows/underflows and can correctly check for a successor + * unless the variable sequence number has grown by more then + * 2**(bitwidth(x)-1)-1. + * + * This means that for a u8 with the maximum value 255, it would think: + * + * * when adding nothing - it is neither a predecessor nor a successor + * * before adding more than 127 to the starting value - it is a predecessor, + * * when adding 128 - it is neither a predecessor nor a successor, + * * after adding more than 127 to the starting value - it is a successor + * + * Return: true when x is a successor of y, false otherwise + */ #define batadv_seq_after(x, y) batadv_seq_before(y, x)
-/* Stop preemption on local cpu while incrementing the counter */ +/** + * batadv_add_counter() - Add to per cpu statistics counter of soft interface + * @bat_priv: the bat priv with all the soft interface information + * @idx: counter index which should be modified + * @count: value to increase counter by + * + * Stop preemption on local cpu while incrementing the counter + */ static inline void batadv_add_counter(struct batadv_priv *bat_priv, size_t idx, size_t count) { this_cpu_add(bat_priv->bat_counters[idx], count); }
+/** + * batadv_inc_counter() - Increase per cpu statistics counter of soft interface + * @b: the bat priv with all the soft interface information + * @i: counter index which should be modified + */ #define batadv_inc_counter(b, i) batadv_add_counter(b, i, 1)
-/* Define a macro to reach the control buffer of the skb. The members of the - * control buffer are defined in struct batadv_skb_cb in types.h. - * The macro is inspired by the similar macro TCP_SKB_CB() in tcp.h. +/** + * BATADV_SKB_CB() - Get batadv_skb_cb from skb control buffer + * @__skb: skb holding the control buffer + * + * The members of the control buffer are defined in struct batadv_skb_cb in + * types.h. The macro is inspired by the similar macro TCP_SKB_CB() in tcp.h. + * + * Return: pointer to the batadv_skb_cb of the skb */ #define BATADV_SKB_CB(__skb) ((struct batadv_skb_cb *)&((__skb)->cb[0]))
diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h index b5d2164532c9..8e543a3cdc6c 100644 --- a/net/batman-adv/originator.h +++ b/net/batman-adv/originator.h @@ -84,8 +84,13 @@ batadv_orig_node_vlan_get(struct batadv_orig_node *orig_node, unsigned short vid); void batadv_orig_node_vlan_put(struct batadv_orig_node_vlan *orig_vlan);
-/* hashfunction to choose an entry in a hash table of given size - * hash algorithm from http://en.wikipedia.org/wiki/Hash_table +/** + * batadv_choose_orig() - Return the index of the orig entry in the hash table + * @data: mac address of the originator node + * @size: the size of the hash table + * + * Return: the hash index where the object represented by @data should be + * stored at. */ static inline u32 batadv_choose_orig(const void *data, u32 size) {