Hi there,
I'm using batmand 0.3 rv1057 on six Buffalo WHR-HP-G54 with WhiteRussian 0.9 Open-WRT. The mesh works fine, even the vis-server does its job. But I'm having some Problems with the Gateway:
One of the routers is connected to a LAN with internet access via WAN-Port and should act as a gateway for the mesh. When the Gateway-Router is started interface gate0 is up and runnig but always has the Adress 169.254.0.0. The clients recognize the gateway (entry in debugmode 2) but can't get a connection to the internet or the standard gateway of the LAN. Clients get IP-adress 169.254.0.x (x starting at 1) for their gate0 interface and the gateway is aware of that.
For example (can't remember the exact messages but this was about their content): Message on Gateway, Debugmode3: "Gateway assigned IP adress 169.254.0.1 to client 192.168.100.2" Message on Client, Debugmode3: "Got IP adress 169.254.0.1 from Gateway 192.168.100.1"
According to the batman manual the gateway should act as "a tiny DHCP server" but as I always get these 169. adresses I assume it isn't running properly. I did not touch the firewall or the iptables because I don't know anything about it. There might be some entries which would solve the problem, but I could not find those in the manual or the mailing-list archive.
As I've found a lot of Debug outputs where the Gateway-DHCP was running, I'm sure someone can help me out with that little problem.
wireless greetings,
Tobi