Hi Team,
I really appreciate for all your contributions in the mesh network. I am trying to set-up mesh network using tplink WR1043ND routers and raspberry pi B+ integrated with ra2800usb (wi pi). The tplink routers are working as expected. Howoever, the raspberry pi is not working.
The configuration file for the Pi board is as follows:
config interface loopback option ifname lo option proto static option ipaddr 127.0.0.1 option netmask 255.0.0.0 config interface lan option ifname eth0 option type bridge option proto static option ipaddr 192.168.1.1 option netmask 255.255.255.0 config interface 'mesh' option ifname 'adhoc0' option mtu '1528' option proto 'batadv' option mesh 'bat0' config interface mb option ifname bat0 option type bridge option proto static option ipaddr 192.168.99.26 option netmask 255.255.255.0
using the same config in tplink routers work but not in pi boards. The adhoc0 interface is not shown up in pi board.
cat sys/class/net/adhoc0/batman-adv/mesh_iface says none. cat sys/class/net/adhoc0/batman-adv/staus says not in use.
Please Help!!! Thanks in advance.
Yours Sincerely, Sailash M Research Student