Hello,
just as a side note, would you mind sharing your changes which were required to cross compile for ARM? batman-adv is supposed to support 2.6.24, and if there is any trouble with this on ARM i'd like to add support for it.
Thank you very much, Simon
On Tue, Jan 19, 2010 at 03:51:51PM +0100, "Juha Ylönen" wrote:
-------- Original-Nachricht --------
Datum: Tue, 19 Jan 2010 20:07:38 +0800 Von: Marek Lindner lindner_marek@yahoo.de
It confirmed what we saw in the other logs: This device (the laptop?) does not see the packets from the other side, therefore the protocol correctly assumes a dead link. There might be 2 reasons: either the wifi layer does not really work or batman-adv drops the packets without any further warning. You can try the latest trunk and/or run batctl/wireshark on the laptop to deep-inspect the packets. Feel free to share the logs with us.
I got the latest trunk up and running, some changes were required to get it to crosscompile for ARM (and 2.6.24 kernel). Same behaviour as before, device log shows a lot of activity, but laptop batman doesn't seem to be doing much anything. I tried the wireshark and got a log ok (which shows a lot of multicast traffic from the device until I disabled the service) but I'm at loss to decipher possible batman packages. What should they look like in wireshark? I only noticed couple of IPX packages from device to (broadcast?) but nothing else. I attached the log file, is anyone able to say if there are batman packages included?
-Juha
Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser