In a 1000 nodes mesh network (Freifunk Hamburg) we can still see 30KBit/s of ARP traffic (equalling about 25% of all layer two specific overhead, remaining after some filtering) flooded through the mesh. These 30KBit/s are mainly ARP Requests from the gateways / DHCP servers.
By snooping DHCPACKs we can learn about MAC/IP address pairs in the DHCP range without relying on ARP. This patch is in preparation to eliminate the need for mesh wide message flooding for IPv4 address resolution.
Also this allows to quickly update a MAC/IP pair at least in the DHT when DHCP reassigns an IP address to a new host.
Signed-off-by: Linus Lüssing linus.luessing@c0d3.blue ---
Changes in v4: * Removed @proto from kerneldoc * Less enum values in batadv_packet.h * Moved skb_set_network_header() call * Updated commit message * Removed noflood mark patch as a result of the discussions from the Battlemesh: An idea which should work transparently to reduce the ARP overhead (together with DHCP snooping) with no need for packet marking via ebtables or tc was suggested.
Changes in v3: * Rebase to master * Shortened commit message
Changes in v2: * Rebase to master * Fix compilation with CONFIG_BATMAN_ADV=n (added stubs)
Changes in RFC -> non-RFC
* Added kerneldoc * Added Signed-off-by * More IP Header checks (iph->hlen considered, ip version checked, ...) * Parsing & checking DHCP Message Type Option, only snooping DHCPACKs now * Moved ethernet protocol check from batadv_dat_check_dhcp to batadv_dat_check_dhcp_ipudp * Removed buffer-length parameter from batadv_dat_dhcp_get_{yiaddr,chaddr}() * Renamed batadv_dat_put() to batadv_dat_put_pairs()
fixup DAT DHCP snooping --- include/uapi/linux/batadv_packet.h | 40 +++++ net/batman-adv/distributed-arp-table.c | 295 +++++++++++++++++++++++++++++++++ net/batman-adv/distributed-arp-table.h | 11 ++ net/batman-adv/soft-interface.c | 11 +- 4 files changed, 355 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index 894d8d2f..6a48f36c 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -630,6 +630,46 @@ struct batadv_tvlv_mcast_data { __u8 reserved[3]; };
+enum batadv_bootpop { + BATADV_BOOTREPLY = 2, +}; + +enum batadv_boothtype { + BATADV_HTYPE_ETHERNET = 1, +}; + +enum batadv_dhcpoptioncode { + BATADV_DHCP_OPT_PAD = 0, + BATADV_DHCP_OPT_MSG_TYPE = 53, + BATADV_DHCP_OPT_END = 255, +}; + +enum batadv_dhcptype { + BATADV_DHCPACK = 5, +}; + +/* { 99, 130, 83, 99 } */ +#define BATADV_DHCP_MAGIC 1669485411 + +struct batadv_dhcp_packet { + __u8 op; + __u8 htype; + __u8 hlen; + __u8 hops; + __be32 xid; + __be16 secs; + __be16 flags; + __be32 ciaddr; + __be32 yiaddr; + __be32 siaddr; + __be32 giaddr; + __u8 chaddr[16]; + __u8 sname[64]; + __u8 file[128]; + __be32 magic; + __u8 options[0]; +}; + #pragma pack()
#endif /* _UAPI_LINUX_BATADV_PACKET_H_ */ diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index a60bacf7..5fa06ef3 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -29,6 +29,7 @@ #include <linux/if_ether.h> #include <linux/if_vlan.h> #include <linux/in.h> +#include <linux/ip.h> #include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/kref.h> @@ -42,9 +43,11 @@ #include <linux/spinlock.h> #include <linux/stddef.h> #include <linux/string.h> +#include <linux/udp.h> #include <linux/workqueue.h> #include <net/arp.h> #include <net/genetlink.h> +#include <net/ip.h> #include <net/netlink.h> #include <net/sock.h> #include <uapi/linux/batman_adv.h> @@ -1436,6 +1439,298 @@ bool batadv_dat_snoop_incoming_arp_reply(struct batadv_priv *bat_priv, }
/** + * batadv_dat_check_dhcp_ipudp() - check skb for IP+UDP headers valid for DHCP + * @skb: the packet to check + * + * Checks whether the given skb has an IP and UDP header valid for a DHCP + * message from a DHCP server. + * + * Return: True if valid, false otherwise. + */ +static bool batadv_dat_check_dhcp_ipudp(struct sk_buff *skb) +{ + struct iphdr *iphdr, _iphdr; + struct udphdr *udphdr, _udphdr; + unsigned int offset = skb_network_offset(skb); + + iphdr = skb_header_pointer(skb, offset, sizeof(_iphdr), &_iphdr); + if (!iphdr || iphdr->version != 4 || ip_hdrlen(skb) < sizeof(_iphdr)) + return false; + + if (iphdr->protocol != IPPROTO_UDP) + return false; + + offset += ip_hdrlen(skb); + skb_set_transport_header(skb, offset); + + udphdr = skb_header_pointer(skb, offset, sizeof(_udphdr), &_udphdr); + if (!udphdr || udphdr->source != htons(67)) + return false; + + return true; +} + +/** + * batadv_dat_check_dhcp() - examine packet for valid DHCP message + * @skb: the packet to check + * @proto: ethernet protocol hint (behind a potential vlan) + * + * Checks whether the given skb is a valid DHCP packet. + * + * Caller needs to ensure that the skb network header is set correctly. + * + * Return: If skb is a valid DHCP packet, then returns its op code + * (e.g. BOOTREPLY vs. BOOTREQUEST). Otherwise returns -EINVAL. + */ +static int batadv_dat_check_dhcp(struct sk_buff *skb, __be16 proto) +{ + u8 *op, _op; + u8 *htype, _htype; + u8 *hlen, _hlen; + __be32 *magic, _magic; + unsigned int dhcp_offset; + unsigned int offset; + + if (proto != htons(ETH_P_IP)) + return -EINVAL; + + if (!batadv_dat_check_dhcp_ipudp(skb)) + return -EINVAL; + + dhcp_offset = skb_transport_offset(skb) + sizeof(struct udphdr); + if (skb->len < dhcp_offset + sizeof(struct batadv_dhcp_packet)) + return -EINVAL; + + offset = dhcp_offset + offsetof(struct batadv_dhcp_packet, op); + + op = skb_header_pointer(skb, offset, sizeof(_op), &_op); + if (!op) + return -EINVAL; + + offset = dhcp_offset + offsetof(struct batadv_dhcp_packet, htype); + + htype = skb_header_pointer(skb, offset, sizeof(_htype), &_htype); + if (!htype || *htype != BATADV_HTYPE_ETHERNET) + return -EINVAL; + + offset = dhcp_offset + offsetof(struct batadv_dhcp_packet, hlen); + + hlen = skb_header_pointer(skb, offset, sizeof(_hlen), &_hlen); + if (!hlen || *hlen != ETH_ALEN) + return -EINVAL; + + offset = dhcp_offset + offsetof(struct batadv_dhcp_packet, magic); + + magic = skb_header_pointer(skb, offset, sizeof(_magic), &_magic); + if (!magic || *magic != htonl(BATADV_DHCP_MAGIC)) + return -EINVAL; + + return *op; +} + +/** + * batadv_dat_get_dhcp_message_type() - get message type of a DHCP packet + * @skb: the DHCP packet to parse + * + * Iterates over the DHCP options of the given DHCP packet to find a + * DHCP Message Type option and parse it. + * + * Caller needs to ensure that the given skb is a valid DHCP packet and + * that the skb transport header is set correctly. + * + * Return: The found DHCP message type value, if found. -EINVAL otherwise. + */ +static int batadv_dat_get_dhcp_message_type(struct sk_buff *skb) +{ + unsigned int offset = skb_transport_offset(skb) + sizeof(struct udphdr); + u8 *type, _type; + struct { + u8 type; + u8 len; + } *tl, _tl; + + offset += sizeof(struct batadv_dhcp_packet); + + while ((tl = skb_header_pointer(skb, offset, sizeof(_tl), &_tl))) { + if (tl->type == BATADV_DHCP_OPT_MSG_TYPE) + break; + + if (tl->type == BATADV_DHCP_OPT_END) + break; + + if (tl->type == BATADV_DHCP_OPT_PAD) + offset++; + else + offset += tl->len + sizeof(_tl); + } + + /* Option Overload Code not supported */ + if (!tl || tl->type != BATADV_DHCP_OPT_MSG_TYPE || + tl->len != sizeof(_type)) + return -EINVAL; + + offset += sizeof(_tl); + + type = skb_header_pointer(skb, offset, sizeof(_type), &_type); + if (!type) + return -EINVAL; + + return *type; +} + +/** + * batadv_dat_get_dhcp_yiaddr() - get yiaddr from a DHCP packet + * @skb: the DHCP packet to parse + * @buffer: a buffer to store the yiaddr in (if necessary / skb is non-linear) + * + * Caller needs to ensure that the given skb is a valid DHCP packet and + * that the skb transport header is set correctly. + * + * Return: A safely accessible "Your IP Address" field from the provided DHCP + * packet. + */ +static __be32 *batadv_dat_dhcp_get_yiaddr(struct sk_buff *skb, __be32 *buffer) +{ + unsigned int offset = skb_transport_offset(skb) + sizeof(struct udphdr); + unsigned int len = sizeof(((struct batadv_dhcp_packet *)0)->yiaddr); + + offset += offsetof(struct batadv_dhcp_packet, yiaddr); + + return skb_header_pointer(skb, offset, len, buffer); +} + +/** + * batadv_dat_get_dhcp_chaddr() - get chaddr from a DHCP packet + * @skb: the DHCP packet to parse + * @buffer: a buffer to store the chaddr in (if necessary / skb is non-linear) + * + * Caller needs to ensure that the given skb is a valid DHCP packet and + * that the skb transport header is set correctly. + * + * Return: A safely accessible "Client Hardware Address" field from the provided + * DHCP packet. + */ +static u8 *batadv_dat_get_dhcp_chaddr(struct sk_buff *skb, u8 *buffer) +{ + unsigned int offset = skb_transport_offset(skb) + sizeof(struct udphdr); + unsigned int len = sizeof(((struct batadv_dhcp_packet *)0)->chaddr); + + offset += offsetof(struct batadv_dhcp_packet, chaddr); + + return skb_header_pointer(skb, offset, len, buffer); +} + +/** + * batadv_dat_put_pairs() - puts two MAC/IP pairs into the DHT and DAT cache + * @bat_priv: the bat priv with all the soft interface information + * @hw_src: first value of DHT and ARP sender MAC + * @ip_src: first key of DHT and ARP sender IP + * @hw_dst: second value of DHT and ARP target MAC + * @ip_dst: second key of DHT and ARP target IP + * @vid: VLAN identifier + * + * First checks whether the given MAC/IP pairs are suitable for DAT. If so, adds + * them to the local DAT cache and propagates them further into the DHT. + * + * For the DHT propagation, hw_src/ip_src will appear as the ARP Reply + * transmitter (and hw_dst/ip_dst as the target). + * + * Return: True on success, false otherwise. + */ +static bool batadv_dat_put_pairs(struct batadv_priv *bat_priv, u8 *hw_src, + __be32 ip_src, u8 *hw_dst, __be32 ip_dst, + unsigned short vid) +{ + struct sk_buff *skb; + int hdr_size; + u16 type; + int ret = false; + + skb = batadv_dat_arp_create_reply(bat_priv, ip_src, ip_dst, hw_src, + hw_dst, vid); + if (!skb) + return false; + + /* Check for validity of provided addresses */ + skb_set_network_header(skb, ETH_HLEN); + hdr_size = skb_network_offset(skb) - ETH_HLEN; + type = batadv_arp_get_type(bat_priv, skb, hdr_size); + if (type != ARPOP_REPLY) + goto err_skip_commit; + + batadv_dat_entry_add(bat_priv, ip_src, hw_src, vid); + batadv_dat_entry_add(bat_priv, ip_dst, hw_dst, vid); + + batadv_dat_send_data(bat_priv, skb, ip_src, vid, BATADV_P_DAT_DHT_PUT); + batadv_dat_send_data(bat_priv, skb, ip_dst, vid, BATADV_P_DAT_DHT_PUT); + + ret = true; + +err_skip_commit: + dev_kfree_skb(skb); + return ret; +} + +/** + * batadv_dat_snoop_outgoing_dhcp_ack() - snoop DHCPACK and fill DAT with it + * @bat_priv: the bat priv with all the soft interface information + * @skb: the packet to snoop + * @proto: ethernet protocol hint (behind a potential vlan) + * @vid: VLAN identifier + * + * This function first checks whether the given skb is a valid DHCPACK. If + * so then its source MAC and IP as well as its DHCP Client Hardware Address + * field and DHCP Your IP Address field are added to the local DAT cache and + * propagated into the DHT. + * + * Caller needs to ensure that the skb mac and network headers are set + * correctly. + */ +void batadv_dat_snoop_outgoing_dhcp_ack(struct batadv_priv *bat_priv, + struct sk_buff *skb, + __be16 proto, + unsigned short vid) +{ + int type; + u8 *chaddr, _chaddr[ETH_ALEN]; + __be32 *yiaddr, _yiaddr; + + if (!atomic_read(&bat_priv->distributed_arp_table)) + return; + + if (batadv_dat_check_dhcp(skb, proto) != BATADV_BOOTREPLY) + return; + + type = batadv_dat_get_dhcp_message_type(skb); + if (type != BATADV_DHCPACK) + return; + + yiaddr = batadv_dat_dhcp_get_yiaddr(skb, &_yiaddr); + if (!yiaddr) + return; + + chaddr = batadv_dat_get_dhcp_chaddr(skb, _chaddr); + if (!chaddr) + return; + + /* ARP sender MAC + IP -> DHCP Client (chaddr+yiaddr), + * ARP target MAC + IP -> DHCP Server (ethhdr/iphdr sources) + */ + if (!batadv_dat_put_pairs(bat_priv, chaddr, *yiaddr, + eth_hdr(skb)->h_source, ip_hdr(skb)->saddr, + vid)) + return; + + batadv_dbg(BATADV_DBG_DAT, bat_priv, + "Snooped from DHCPACK (server-side): %pI4, %pM (vid: %i)\n", + &ip_hdr(skb)->saddr, eth_hdr(skb)->h_source, + batadv_print_vid(vid)); + batadv_dbg(BATADV_DBG_DAT, bat_priv, + "Snooped from DHCPACK (client-side): %pI4, %pM (vid: %i)\n", + yiaddr, chaddr, batadv_print_vid(vid)); +} + +/** * batadv_dat_drop_broadcast_packet() - check if an ARP request has to be * dropped (because the node has already obtained the reply via DAT) or not * @bat_priv: the bat priv with all the soft interface information diff --git a/net/batman-adv/distributed-arp-table.h b/net/batman-adv/distributed-arp-table.h index a0459602..cf58d230 100644 --- a/net/batman-adv/distributed-arp-table.h +++ b/net/batman-adv/distributed-arp-table.h @@ -46,6 +46,10 @@ void batadv_dat_snoop_outgoing_arp_reply(struct batadv_priv *bat_priv, struct sk_buff *skb); bool batadv_dat_snoop_incoming_arp_reply(struct batadv_priv *bat_priv, struct sk_buff *skb, int hdr_size); +void batadv_dat_snoop_outgoing_dhcp_ack(struct batadv_priv *bat_priv, + struct sk_buff *skb, + __be16 proto, + unsigned short vid); bool batadv_dat_drop_broadcast_packet(struct batadv_priv *bat_priv, struct batadv_forw_packet *forw_packet);
@@ -140,6 +144,13 @@ batadv_dat_snoop_incoming_arp_reply(struct batadv_priv *bat_priv, return false; }
+static inline void +batadv_dat_snoop_outgoing_dhcp_ack(struct batadv_priv *bat_priv, + struct sk_buff *skb, __be16 proto, + unsigned short vid) +{ +} + static inline bool batadv_dat_drop_broadcast_packet(struct batadv_priv *bat_priv, struct batadv_forw_packet *forw_packet) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 1485263a..a8559629 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -212,6 +212,7 @@ static netdev_tx_t batadv_interface_tx(struct sk_buff *skb, enum batadv_forw_mode forw_mode; struct batadv_orig_node *mcast_single_orig = NULL; int network_offset = ETH_HLEN; + __be16 proto;
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE) goto dropped; @@ -223,12 +224,15 @@ static netdev_tx_t batadv_interface_tx(struct sk_buff *skb, vid = batadv_get_vid(skb, 0); ethhdr = eth_hdr(skb);
- switch (ntohs(ethhdr->h_proto)) { + proto = ethhdr->h_proto; + + switch (ntohs(proto)) { case ETH_P_8021Q: vhdr = vlan_eth_hdr(skb); + proto = vhdr->h_vlan_encapsulated_proto;
/* drop batman-in-batman packets to prevent loops */ - if (vhdr->h_vlan_encapsulated_proto != htons(ETH_P_BATMAN)) { + if (proto != htons(ETH_P_BATMAN)) { network_offset += VLAN_HLEN; break; } @@ -256,6 +260,9 @@ static netdev_tx_t batadv_interface_tx(struct sk_buff *skb, goto dropped; }
+ /* Snoop address candidates from DHCPACKs for early DAT filling */ + batadv_dat_snoop_outgoing_dhcp_ack(bat_priv, skb, proto, vid); + /* don't accept stp packets. STP does not help in meshes. * better use the bridge loop avoidance ... *