From: Marco Dalla Torre marco.dallato@gmail.com
Allow the batctl tool to take advantage of changes from commit e4ff5c153dab054a6cd1c4132f87bc5e77127456 "add sys framework for VLAN" recently added to batman-adv, so that users can execute commands in a per VLAN fashion.
If no directory entry corresponding to the user-selected device is found at the standard location for non VLAN interfaces (/sys/class/net/${device}/mesh/), 'batctl' now looks into directory: /sys/class/net/${base_device}/mesh/vlan${vid} Information on VLAN devices (base device, vid) necessary to construct the directory path is acquired by querying the netlink kernel module. Where: -${base_device}: the batman device on top of which the VLAN is sitting -${device}: the device interface for the VLAN, -${vid}: the identifier assigned to the VLAN.
If the user-selected command is not supported by the VLAN, an appropriate error is shown.
Signed-off-by: Marco Dalla Torre marco.dallato@gmail.com Signed-off-by: Antonio Quartulli antonio@meshcoding.com --- main.c | 2 +- man/batctl.8 | 4 ++-- sys.c | 15 +++++++++++++-- sys.h | 22 ++++++++++++---------- 4 files changed, 28 insertions(+), 15 deletions(-)
diff --git a/main.c b/main.c index aab2e11..a37c0b7 100644 --- a/main.c +++ b/main.c @@ -46,7 +46,7 @@ static void print_usage(void)
fprintf(stderr, "Usage: batctl [options] command|debug table [parameters]\n"); fprintf(stderr, "options:\n"); - fprintf(stderr, " \t-m mesh interface (default 'bat0')\n"); + fprintf(stderr, " \t-m mesh interface or VLAN created on top of a mesh interface (default 'bat0')\n"); fprintf(stderr, " \t-h print this help (or 'batctl <command|debug table> -h' for the parameter help)\n"); fprintf(stderr, " \t-v print version\n"); fprintf(stderr, "\n"); diff --git a/man/batctl.8 b/man/batctl.8 index fafe735..b3b12bd 100644 --- a/man/batctl.8 +++ b/man/batctl.8 @@ -42,7 +42,7 @@ behaviour or using the B.A.T.M.A.N. advanced protocol. .SH OPTIONS .TP .I \fBoptions: --m specify mesh interface (default 'bat0') +-m specify mesh interface or VLAN created on top of a mesh interface (default 'bat0') .br -h print general batctl help .br @@ -61,7 +61,7 @@ originator interval. The interval is in units of milliseconds. .br .IP "\fBap_isolation\fP|\fBap\fP [\fB0\fP|\fB1\fP]" If no parameter is given the current ap isolation setting is displayed. Otherwise the parameter is used to enable or -disable ap isolation. +disable ap isolation. This command can be used in conjunction with "-m" option to target per VLAN configurations. .br .IP "\fBbridge_loop_avoidance\fP|\fBbl\fP [\fB0\fP|\fB1\fP]" If no parameter is given the current bridge loop avoidance setting is displayed. Otherwise the parameter is used to enable diff --git a/sys.c b/sys.c index 2a508e2..5cebf52 100644 --- a/sys.c +++ b/sys.c @@ -372,8 +372,8 @@ static void settings_usage(int setting)
int handle_sys_setting(char *mesh_iface, int setting, int argc, char **argv) { - int optchar, res = EXIT_FAILURE; - char *path_buff; + int vid, optchar, res = EXIT_FAILURE; + char *path_buff, *base_dev = NULL; const char **ptr;
while ((optchar = getopt(argc, argv, "h")) != -1) { @@ -387,10 +387,20 @@ int handle_sys_setting(char *mesh_iface, int setting, int argc, char **argv) } }
+ /* prepare the classic path */ path_buff = malloc(PATH_BUFF_LEN); snprintf(path_buff, PATH_BUFF_LEN, SYS_BATIF_PATH_FMT, mesh_iface); path_buff[PATH_BUFF_LEN - 1] = '\0';
+ /* if the specified interface is a VLAN then change the path to point + * to the proper "vlan%{vid}" subfolder in the sysfs tree. + */ + vid = vlan_get_link(mesh_iface, &base_dev); + if (vid >= 0) { + snprintf(path_buff, PATH_BUFF_LEN, SYS_VLAN_PATH, base_dev, vid); + path_buff[PATH_BUFF_LEN - 1] = '\0'; + } + if (argc == 1) { res = read_file(path_buff, (char *)batctl_settings[setting].sysfs_name, NO_FLAGS, 0, 0, 0); @@ -425,6 +435,7 @@ write_file:
out: free(path_buff); + free(base_dev); return res; }
diff --git a/sys.h b/sys.h index 8934978..2cbbcfb 100644 --- a/sys.h +++ b/sys.h @@ -24,16 +24,18 @@
#include "main.h"
-#define SYS_BATIF_PATH_FMT "/sys/class/net/%s/mesh/" -#define SYS_LOG_LEVEL "log_level" -#define SYS_LOG "log" -#define SYS_GW_MODE "gw_mode" -#define SYS_GW_SEL "gw_sel_class" -#define SYS_GW_BW "gw_bandwidth" -#define SYS_IFACE_PATH "/sys/class/net" -#define SYS_IFACE_DIR SYS_IFACE_PATH"/%s/" -#define SYS_MESH_IFACE_FMT SYS_IFACE_PATH"/%s/batman_adv/mesh_iface" -#define SYS_IFACE_STATUS_FMT SYS_IFACE_PATH"/%s/batman_adv/iface_status" +#define SYS_BATIF_PATH_FMT "/sys/class/net/%s/mesh/" +#define SYS_LOG_LEVEL "log_level" +#define SYS_LOG "log" +#define SYS_GW_MODE "gw_mode" +#define SYS_GW_SEL "gw_sel_class" +#define SYS_GW_BW "gw_bandwidth" +#define SYS_IFACE_PATH "/sys/class/net" +#define SYS_IFACE_DIR SYS_IFACE_PATH"/%s/" +#define SYS_MESH_IFACE_FMT SYS_IFACE_PATH"/%s/batman_adv/mesh_iface" +#define SYS_IFACE_STATUS_FMT SYS_IFACE_PATH"/%s/batman_adv/iface_status" +#define SYS_VLAN_PATH SYS_IFACE_PATH"/%s/mesh/vlan%d/" +#define VLAN_ID_MAX_LEN 4
enum batctl_settings_list { BATCTL_SETTINGS_ORIG_INTERVAL,