Hi, Im new to batman-adv and this is my first attempt to make it work. Im having connectivity issue, couldnt complete the configuration.
topology: PC1---eth0(Openwrt1)phy1sta0----------phy1ap0(openwrt2)eth0--PC2
openwrt1 has bridge(br-lan), with members of eth0 and bat0. PC1 is connected to eth0 bat0 has interface phy1-ap0 and interface is active openwrt1 br1 ip is 192.168.1.11
openwrt2 has bridge(br-lan), with members of eth0 and bat0 PC2 is connected to eth0 bat0 has interface phy1-sta0 and interface is active openwrt2 br1 ip is 192.168.1.12
openwrt2 phy1-sta0 is connected to openwrt1 phy1-ap0
I can not ping 192.168.1.11 from openwrt2 and can not 192.168.1.12 from openwrt1 (from console/ssh interfaces) My final aim is to be able to ping from PC1 connected to eth0 of openwrt1, to openwrt1, openwrt2 and PC2 connected to eth0 of openwrt2. What I am missing here?
some logs from batman-adv: version: batctl 2024.3-openwrt-1 [batman-adv: 2024.3-openwrt-2]
[ 188.360147] phy1-sta0: associated [ 188.379399] batman_adv: bat0: Adding interface: phy1-sta0 [ 188.384849] batman_adv: bat0: The MTU of interface phy1-sta0 is too small (1532) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem. [ 188.409162] batman_adv: bat0: Interface activated: phy1-sta0
root@dasal-01:~# brctl show bridge name bridge id STP enabled interfaces br-lan 7fff.16acd96f6f78 no eth0 bat0 root@owrt-01:~# batctl if phy1-sta0: active