Axel Neumann wrote:
Hey Dragan,
#!/bin/sh iwconfig eth2 mode ad-hoc essid olsr.freifunk.net channel 10 ap 02:CA:FF:EE ifconfig eth2 104.130.30.9
(just to be shure) this should be 02:CA:FF:EE:BA:BE
of course, it was a copy+paste issue...
..
i am starting batman with:
#!/bin/bash iwconfig eth2 mode ad-hoc essid olsr.freifunk.net channel 10 ifconfig eth2 105.130.30.9 ifconfig eth2 up sleep 1 batmand -d 1 -p 105.131.41.5 -r 1 eth2
can you start batmand in background with: batmand -r 1 -p 105.131.41.5 eth2 instead and tell if the problem continues. This command instantly returns your prompt but a: ps -aux | grep batmand should show the running main-daemon in the background.
that looks good in the moment here! it is connecting to the preferred gateway very fast, but again it stops after some minutes (running 'batmand -c -d 2' in another terminal).
Also please check that there are no predefined host routes for the 105.0.0.0/8 network before you start batmand and after it stopped. Meaning a: route -n | grep ^105 berfore and after the daemon is running should only show: 105.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth2 While batmand is running it should of course show routing entries for all other known batman nodes but if such host routes are still there after the daemon stopped it is a definitive sign for an uncorect termination of teh daemon.
this is strange, after killing batmand, sometimes this command will give out a long list of nodes, and sometimes it is behaving as you are expecting it.
#!/bin/bash batmand -c -d 2
in another terminal.
It should of course always be possible to access the debug output from the running batmand main-daemon by launching a batmand-client with batmand -c -d <1-4> or in batch mode (providing just a single outputpage and returns to the prompt) with: batmand -c -d <1-4> -b However, it would be interesting to know if the crash is related to existence of a batmand-client connecting to the main daemon. For example for batmand-0.2.0-rc2-rv350 (and before) debug level 4: batmand -c -d 4 is known to cause the batmand to crash after a short time and it might be possible that this problems also occur with other debug-levels. Try batmand -c -d 1 and batmand -c -d 2 instead.
when i am running batmand without debug and :
'batmand -c -d 2', batmand is stopping after couple of minutes.
trying now to run only batmand without -d option and no client, lets see for how long it will be running?!
cheers, doc
p.s. example, batmand was stopping now again and several minutes after it is stopped:
murija2:/home/nowhiskey# route -n | grep ^105 105.192.99.3 105.130.1.67 255.255.255.255 UGH 0 0 0 eth2 105.131.10.1 105.130.30.1 255.255.255.255 UGH 0 0 0 eth2 105.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth2 murija2:/home/nowhiskey# ...........
'ps ax' does not shows any batman process running.
but my feeling is, that when i do not start 'batmand -c' i will be connected much more faster. but this statement unfortunately is not very informative.
ciao, axel