Hello All;
I am truing to setup two batman openWRT nodes;
I have that topology br-lan 0002.001e8cc9451b yes bat0 eth0 eth1 wlan0
Counters of RX & TX packets are increase on wlan0, but no RX packets on Batman Iface Bat0 In logs first(ha00) node i am only see "[ 69443] Sending own packet (originator c4:17:fe:b4:0b:97 seqno 70438, TQ 255, TTL 50, IDF off) on interface wlan0 [c4:17:fe:b4:0b:97]". Second(ha01) node I am see "[ 69553] Sending own packet (originator c4:17:fe:b2:50:c8 seqno 70549, TQ 255, TTL 50, IDF off) on interface wlan0 [c4:17:fe:b2:50:c8]" What am i doing wrong?
First Node don't see Second Node. Bat Setup: ha00 - /etc/config/wireless: config wifi-device radio0 option type mac80211 option channel 1 option macaddr c4:17:fe:b4:0b:97 option hwmode 11g option htmode HT20 list ht_capab SHORT-GI-40 list ht_capab TX-STBC list ht_capab RX-STBC1 list ht_capab DSSS_CCK-40
config wifi-iface option device radio0 option network lan option mtu 1527 option mode ahdemo option ssid g_mesh option encryption none /etc/config/batman-adv
config 'mesh' 'bat0' option 'interfaces' 'wlan0' option 'orig_interval' option 'log_level' option 'aggregated_ogms' option 'bonding' option 'vis_mode' ------------------------------------- ha01 - /etc/config/wireless config wifi-device radio0 option type mac80211 option channel 1 option macaddr c4:17:fe:b2:50:c8 option hwmode 11g option htmode HT20 list ht_capab SHORT-GI-40 list ht_capab TX-STBC list ht_capab RX-STBC1 list ht_capab DSSS_CCK-40
config wifi-iface option device radio0 option network lan option mode ahdemo option ssid g_mesh option encryption none
/etc/config/batman-adv config 'mesh' 'bat0' option 'interfaces' 'wlan0' option 'orig_interval' option 'log_level' option 'aggregated_ogms' option 'bonding' option 'vis_mode' .