B.A.T.M.A.N

b.a.t.m.a.n@lists.open-mesh.org

15 participants
4308 discussions

[B.A.T.M.A.N.] [PATCH] batman-adv: Add argument names for function ptr definitions
by Sven Eckelmann 30 Sep '17

30 Sep '17

checkpatch started to report unnamed arguments in function pointer definitions. Add the corresponding names to these definitions to avoid this warning. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- net/batman-adv/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 033819ae..4daed7ad 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -73,8 +73,8 @@ * list traversals just rcu-locked */ struct list_head batadv_hardif_list; -static int (*batadv_rx_handler[256])(struct sk_buff *, - struct batadv_hard_iface *); +static int (*batadv_rx_handler[256])(struct sk_buff *skb, + struct batadv_hard_iface *recv_if); unsigned char batadv_broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; @@ -540,8 +540,8 @@ batadv_recv_handler_register(u8 packet_type, int (*recv_handler)(struct sk_buff *, struct batadv_hard_iface *)) { - int (*curr)(struct sk_buff *, - struct batadv_hard_iface *); + int (*curr)(struct sk_buff *skb, + struct batadv_hard_iface *recv_if); curr = batadv_rx_handler[packet_type]; if (curr != batadv_recv_unhandled_packet && -- 2.11.0

1 0

[B.A.T.M.A.N.] [PATCH] batman-adv: Remove useless function skb_header_release
by Sven Eckelmann 27 Sep '17

27 Sep '17

From: Gao Feng <gfree.wind(a)vip.163.com> There is no one which would invokes the function skb_header_release. So just remove it now. Signed-off-by: Gao Feng <gfree.wind(a)vip.163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- This patch was already accepted by David and should be applied directly after the release of batman-adv 2017.3. And yes, I know that this line is too long now net/batman-adv/soft-interface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 10f7edfb..c2c98674 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -69,7 +69,7 @@ int batadv_skb_head_push(struct sk_buff *skb, unsigned int len) int result; /* TODO: We must check if we can release all references to non-payload - * data using skb_header_release in our skbs to allow skb_cow_header to + * data using __skb_header_release in our skbs to allow skb_cow_header to * work optimally. This means that those skbs are not allowed to read * or write any data which is before the current position of skb->data * after that call and thus allow other skbs with the same data buffer -- 2.11.0

1 0

[B.A.T.M.A.N.] [PATCH] batman-adv: Convert batman-adv.txt to reStructuredText
by Sven Eckelmann 19 Sep '17

19 Sep '17

Converting the freeform text to parsable reStructuredText, allows the integration in the sphinx based documentation system of the kernel. It will therefore be accessible as hypertext under https://www.kernel.org/doc/html/latest/ Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- Documentation/networking/00-INDEX | 2 - Documentation/networking/batman-adv.rst | 220 ++++++++++++++++++++++++++++++++ Documentation/networking/batman-adv.txt | 215 ------------------------------- Documentation/networking/index.rst | 1 + MAINTAINERS | 2 +- 5 files changed, 222 insertions(+), 218 deletions(-) create mode 100644 Documentation/networking/batman-adv.rst delete mode 100644 Documentation/networking/batman-adv.txt diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index c6beb5f1637f..7a79b3587dd3 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -30,8 +30,6 @@ atm.txt - info on where to get ATM programs and support for Linux. ax25.txt - info on using AX.25 and NET/ROM code for Linux -batman-adv.txt - - B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames. baycom.txt - info on the driver for Baycom style amateur radio modems bonding.txt diff --git a/Documentation/networking/batman-adv.rst b/Documentation/networking/batman-adv.rst new file mode 100644 index 000000000000..a342b2cc3dc6 --- /dev/null +++ b/Documentation/networking/batman-adv.rst @@ -0,0 +1,220 @@ +========== +batman-adv +========== + +Batman advanced is a new approach to wireless networking which does no longer +operate on the IP basis. Unlike the batman daemon, which exchanges information +using UDP packets and sets routing tables, batman-advanced operates on ISO/OSI +Layer 2 only and uses and routes (or better: bridges) Ethernet Frames. It +emulates a virtual network switch of all nodes participating. Therefore all +nodes appear to be link local, thus all higher operating protocols won't be +affected by any changes within the network. You can run almost any protocol +above batman advanced, prominent examples are: IPv4, IPv6, DHCP, IPX. + +Batman advanced was implemented as a Linux kernel driver to reduce the overhead +to a minimum. It does not depend on any (other) network driver, and can be used +on wifi as well as ethernet lan, vpn, etc ... (anything with ethernet-style +layer 2). + + +Configuration +============= + +Load the batman-adv module into your kernel:: + + $ insmod batman-adv.ko + +The module is now waiting for activation. You must add some interfaces on which +batman can operate. After loading the module batman advanced will scan your +systems interfaces to search for compatible interfaces. Once found, it will +create subfolders in the ``/sys`` directories of each supported interface, +e.g.:: + + $ ls /sys/class/net/eth0/batman_adv/ + elp_interval iface_status mesh_iface throughput_override + +If an interface does not have the ``batman_adv`` subfolder, it probably is not +supported. Not supported interfaces are: loopback, non-ethernet and batman's +own interfaces. + +Note: After the module was loaded it will continuously watch for new +interfaces to verify the compatibility. There is no need to reload the module +if you plug your USB wifi adapter into your machine after batman advanced was +initially loaded. + +The batman-adv soft-interface can be created using the iproute2 tool ``ip``:: + + $ ip link add name bat0 type batadv + +To activate a given interface simply attach it to the ``bat0`` interface:: + + $ ip link set dev eth0 master bat0 + +Repeat this step for all interfaces you wish to add. Now batman starts +using/broadcasting on this/these interface(s). + +By reading the "iface_status" file you can check its status:: + + $ cat /sys/class/net/eth0/batman_adv/iface_status + active + +To deactivate an interface you have to detach it from the "bat0" interface:: + + $ ip link set dev eth0 nomaster + + +All mesh wide settings can be found in batman's own interface folder:: + + $ ls /sys/class/net/bat0/mesh/ + aggregated_ogms fragmentation isolation_mark routing_algo + ap_isolation gw_bandwidth log_level vlan0 + bonding gw_mode multicast_mode + bridge_loop_avoidance gw_sel_class network_coding + distributed_arp_table hop_penalty orig_interval + +There is a special folder for debugging information:: + + $ ls /sys/kernel/debug/batman_adv/bat0/ + bla_backbone_table log neighbors transtable_local + bla_claim_table mcast_flags originators + dat_cache nc socket + gateways nc_nodes transtable_global + +Some of the files contain all sort of status information regarding the mesh +network. For example, you can view the table of originators (mesh +participants) with:: + + $ cat /sys/kernel/debug/batman_adv/bat0/originators + +Other files allow to change batman's behaviour to better fit your requirements. +For instance, you can check the current originator interval (value in +milliseconds which determines how often batman sends its broadcast packets):: + + $ cat /sys/class/net/bat0/mesh/orig_interval + 1000 + +and also change its value:: + + $ echo 3000 > /sys/class/net/bat0/mesh/orig_interval + +In very mobile scenarios, you might want to adjust the originator interval to a +lower value. This will make the mesh more responsive to topology changes, but +will also increase the overhead. + + +Usage +===== + +To make use of your newly created mesh, batman advanced provides a new +interface "bat0" which you should use from this point on. All interfaces added +to batman advanced are not relevant any longer because batman handles them for +you. Basically, one "hands over" the data by using the batman interface and +batman will make sure it reaches its destination. + +The "bat0" interface can be used like any other regular interface. It needs an +IP address which can be either statically configured or dynamically (by using +DHCP or similar services):: + + NodeA: ip link set up dev bat0 + NodeA: ip addr add 192.168.0.1/24 dev bat0 + + NodeB: ip link set up dev bat0 + NodeB: ip addr add 192.168.0.2/24 dev bat0 + NodeB: ping 192.168.0.1 + +Note: In order to avoid problems remove all IP addresses previously assigned to +interfaces now used by batman advanced, e.g.:: + + $ ip addr flush dev eth0 + + +Logging/Debugging +================= + +All error messages, warnings and information messages are sent to the kernel +log. Depending on your operating system distribution this can be read in one of +a number of ways. Try using the commands: ``dmesg``, ``logread``, or looking in +the files ``/var/log/kern.log`` or ``/var/log/syslog``. All batman-adv messages +are prefixed with "batman-adv:" So to see just these messages try:: + + $ dmesg | grep batman-adv + +When investigating problems with your mesh network, it is sometimes necessary to +see more detail debug messages. This must be enabled when compiling the +batman-adv module. When building batman-adv as part of kernel, use "make +menuconfig" and enable the option ``B.A.T.M.A.N. debugging`` +(``CONFIG_BATMAN_ADV_DEBUG=y``). + +Those additional debug messages can be accessed using a special file in +debugfs:: + + $ cat /sys/kernel/debug/batman_adv/bat0/log + +The additional debug output is by default disabled. It can be enabled during +run time. Following log_levels are defined: + +.. flat-table:: + + * - 0 + - All debug output disabled + * - 1 + - Enable messages related to routing / flooding / broadcasting + * - 2 + - Enable messages related to route added / changed / deleted + * - 4 + - Enable messages related to translation table operations + * - 8 + - Enable messages related to bridge loop avoidance + * - 16 + - Enable messages related to DAT, ARP snooping and parsing + * - 32 + - Enable messages related to network coding + * - 64 + - Enable messages related to multicast + * - 128 + - Enable messages related to throughput meter + * - 255 + - Enable all messages + +The debug output can be changed at runtime using the file +``/sys/class/net/bat0/mesh/log_level``. e.g.:: + + $ echo 6 > /sys/class/net/bat0/mesh/log_level + +will enable debug messages for when routes change. + +Counters for different types of packets entering and leaving the batman-adv +module are available through ethtool:: + + $ ethtool --statistics bat0 + + +batctl +====== + +As batman advanced operates on layer 2, all hosts participating in the virtual +switch are completely transparent for all protocols above layer 2. Therefore +the common diagnosis tools do not work as expected. To overcome these problems, +batctl was created. At the moment the batctl contains ping, traceroute, tcpdump +and interfaces to the kernel module settings. + +For more information, please see the manpage (``man batctl``). + +batctl is available on https://www.open-mesh.org/ + + +Contact +======= + +Please send us comments, experiences, questions, anything :) + +IRC: + #batman on irc.freenode.org +Mailing-list: + b.a.t.m.a.n(a)open-mesh.org (optional subscription at + https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n) + +You can also contact the Authors: + +* Marek Lindner <mareklindner(a)neomailbox.ch> +* Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt deleted file mode 100644 index ccf94677b240..000000000000 --- a/Documentation/networking/batman-adv.txt +++ /dev/null @@ -1,215 +0,0 @@ -BATMAN-ADV ----------- - -Batman advanced is a new approach to wireless networking which -does no longer operate on the IP basis. Unlike the batman daemon, -which exchanges information using UDP packets and sets routing -tables, batman-advanced operates on ISO/OSI Layer 2 only and uses -and routes (or better: bridges) Ethernet Frames. It emulates a -virtual network switch of all nodes participating. Therefore all -nodes appear to be link local, thus all higher operating proto- -cols won't be affected by any changes within the network. You can -run almost any protocol above batman advanced, prominent examples -are: IPv4, IPv6, DHCP, IPX. - -Batman advanced was implemented as a Linux kernel driver to re- -duce the overhead to a minimum. It does not depend on any (other) -network driver, and can be used on wifi as well as ethernet lan, -vpn, etc ... (anything with ethernet-style layer 2). - - -CONFIGURATION -------------- - -Load the batman-adv module into your kernel: - -# insmod batman-adv.ko - -The module is now waiting for activation. You must add some in- -terfaces on which batman can operate. After loading the module -batman advanced will scan your systems interfaces to search for -compatible interfaces. Once found, it will create subfolders in -the /sys directories of each supported interface, e.g. - -# ls /sys/class/net/eth0/batman_adv/ -# elp_interval iface_status mesh_iface throughput_override - -If an interface does not have the "batman_adv" subfolder it prob- -ably is not supported. Not supported interfaces are: loopback, -non-ethernet and batman's own interfaces. - -Note: After the module was loaded it will continuously watch for -new interfaces to verify the compatibility. There is no need to -reload the module if you plug your USB wifi adapter into your ma- -chine after batman advanced was initially loaded. - -The batman-adv soft-interface can be created using the iproute2 -tool "ip" - -# ip link add name bat0 type batadv - -To activate a given interface simply attach it to the "bat0" -interface - -# ip link set dev eth0 master bat0 - -Repeat this step for all interfaces you wish to add. Now batman -starts using/broadcasting on this/these interface(s). - -By reading the "iface_status" file you can check its status: - -# cat /sys/class/net/eth0/batman_adv/iface_status -# active - -To deactivate an interface you have to detach it from the -"bat0" interface: - -# ip link set dev eth0 nomaster - - -All mesh wide settings can be found in batman's own interface -folder: - -# ls /sys/class/net/bat0/mesh/ -# aggregated_ogms fragmentation isolation_mark routing_algo -# ap_isolation gw_bandwidth log_level vlan0 -# bonding gw_mode multicast_mode -# bridge_loop_avoidance gw_sel_class network_coding -# distributed_arp_table hop_penalty orig_interval - -There is a special folder for debugging information: - -# ls /sys/kernel/debug/batman_adv/bat0/ -# bla_backbone_table log neighbors transtable_local -# bla_claim_table mcast_flags originators -# dat_cache nc socket -# gateways nc_nodes transtable_global - -Some of the files contain all sort of status information regard- -ing the mesh network. For example, you can view the table of -originators (mesh participants) with: - -# cat /sys/kernel/debug/batman_adv/bat0/originators - -Other files allow to change batman's behaviour to better fit your -requirements. For instance, you can check the current originator -interval (value in milliseconds which determines how often batman -sends its broadcast packets): - -# cat /sys/class/net/bat0/mesh/orig_interval -# 1000 - -and also change its value: - -# echo 3000 > /sys/class/net/bat0/mesh/orig_interval - -In very mobile scenarios, you might want to adjust the originator -interval to a lower value. This will make the mesh more respon- -sive to topology changes, but will also increase the overhead. - - -USAGE ------ - -To make use of your newly created mesh, batman advanced provides -a new interface "bat0" which you should use from this point on. -All interfaces added to batman advanced are not relevant any -longer because batman handles them for you. Basically, one "hands -over" the data by using the batman interface and batman will make -sure it reaches its destination. - -The "bat0" interface can be used like any other regular inter- -face. It needs an IP address which can be either statically con- -figured or dynamically (by using DHCP or similar services): - -# NodeA: ip link set up dev bat0 -# NodeA: ip addr add 192.168.0.1/24 dev bat0 - -# NodeB: ip link set up dev bat0 -# NodeB: ip addr add 192.168.0.2/24 dev bat0 -# NodeB: ping 192.168.0.1 - -Note: In order to avoid problems remove all IP addresses previ- -ously assigned to interfaces now used by batman advanced, e.g. - -# ip addr flush dev eth0 - - -LOGGING/DEBUGGING ------------------ - -All error messages, warnings and information messages are sent to -the kernel log. Depending on your operating system distribution -this can be read in one of a number of ways. Try using the com- -mands: dmesg, logread, or looking in the files /var/log/kern.log -or /var/log/syslog. All batman-adv messages are prefixed with -"batman-adv:" So to see just these messages try - -# dmesg | grep batman-adv - -When investigating problems with your mesh network it is some- -times necessary to see more detail debug messages. This must be -enabled when compiling the batman-adv module. When building bat- -man-adv as part of kernel, use "make menuconfig" and enable the -option "B.A.T.M.A.N. debugging". - -Those additional debug messages can be accessed using a special -file in debugfs - -# cat /sys/kernel/debug/batman_adv/bat0/log - -The additional debug output is by default disabled. It can be en- -abled during run time. Following log_levels are defined: - - 0 - All debug output disabled - 1 - Enable messages related to routing / flooding / broadcasting - 2 - Enable messages related to route added / changed / deleted - 4 - Enable messages related to translation table operations - 8 - Enable messages related to bridge loop avoidance - 16 - Enable messages related to DAT, ARP snooping and parsing - 32 - Enable messages related to network coding - 64 - Enable messages related to multicast -128 - Enable messages related to throughput meter -255 - Enable all messages - -The debug output can be changed at runtime using the file -/sys/class/net/bat0/mesh/log_level. e.g. - -# echo 6 > /sys/class/net/bat0/mesh/log_level - -will enable debug messages for when routes change. - -Counters for different types of packets entering and leaving the -batman-adv module are available through ethtool: - -# ethtool --statistics bat0 - - -BATCTL ------- - -As batman advanced operates on layer 2 all hosts participating in -the virtual switch are completely transparent for all protocols -above layer 2. Therefore the common diagnosis tools do not work -as expected. To overcome these problems batctl was created. At -the moment the batctl contains ping, traceroute, tcpdump and -interfaces to the kernel module settings. - -For more information, please see the manpage (man batctl). - -batctl is available on https://www.open-mesh.org/ - - -CONTACT -------- - -Please send us comments, experiences, questions, anything :) - -IRC: #batman on irc.freenode.org -Mailing-list: b.a.t.m.a.n(a)open-mesh.org (optional subscription - at https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n) - -You can also contact the Authors: - -Marek Lindner <mareklindner(a)neomailbox.ch> -Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index b5bd87e01f52..66e620866245 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -6,6 +6,7 @@ Contents: .. toctree:: :maxdepth: 2 + batman-adv kapi z8530book diff --git a/MAINTAINERS b/MAINTAINERS index 2af3ab3f7702..62d216af5bd4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2481,7 +2481,7 @@ Q: https://patchwork.open-mesh.org/project/batman/list/ S: Maintained F: Documentation/ABI/testing/sysfs-class-net-batman-adv F: Documentation/ABI/testing/sysfs-class-net-mesh -F: Documentation/networking/batman-adv.txt +F: Documentation/networking/batman-adv.rst F: include/uapi/linux/batman_adv.h F: net/batman-adv/ -- 2.11.0

2 6

[B.A.T.M.A.N.] [PATCH] batman-adv: Remove unnecessary parentheses
by Sven Eckelmann 23 Aug '17

23 Aug '17

checkpatch introduced with commit e2ac38dbcaf7 ("checkpatch: add --strict check for ifs with unnecessary parentheses") an additional test which identifies some unnecessary parentheses. Remove these unnecessary parentheses to avoid the warnings and to unify the coding style slightly more. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- net/batman-adv/bat_iv_ogm.c | 24 ++++++++++++------------ net/batman-adv/bat_v.c | 2 +- net/batman-adv/bat_v_elp.c | 6 +++--- net/batman-adv/bat_v_ogm.c | 12 ++++++------ net/batman-adv/distributed-arp-table.c | 4 ++-- net/batman-adv/gateway_client.c | 8 ++++---- net/batman-adv/gateway_common.c | 18 +++++++++--------- net/batman-adv/hard-interface.c | 12 ++++++------ net/batman-adv/icmp_socket.c | 4 ++-- net/batman-adv/main.c | 4 ++-- net/batman-adv/multicast.c | 2 +- net/batman-adv/originator.c | 26 +++++++++++++------------- net/batman-adv/routing.c | 6 +++--- net/batman-adv/send.c | 6 +++--- net/batman-adv/soft-interface.c | 2 +- net/batman-adv/sysfs.c | 4 ++-- net/batman-adv/tp_meter.c | 2 +- 17 files changed, 71 insertions(+), 71 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 83ba5483..1b659ab6 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -916,8 +916,8 @@ static void batadv_iv_ogm_schedule(struct batadv_hard_iface *hard_iface) u16 tvlv_len = 0; unsigned long send_time; - if ((hard_iface->if_status == BATADV_IF_NOT_IN_USE) || - (hard_iface->if_status == BATADV_IF_TO_BE_REMOVED)) + if (hard_iface->if_status == BATADV_IF_NOT_IN_USE || + hard_iface->if_status == BATADV_IF_TO_BE_REMOVED) return; /* the interface gets activated here to avoid race conditions between @@ -1264,7 +1264,7 @@ static bool batadv_iv_ogm_calc_tq(struct batadv_orig_node *orig_node, * drops as they can't send and receive at the same time. */ tq_iface_penalty = BATADV_TQ_MAX_VALUE; - if (if_outgoing && (if_incoming == if_outgoing) && + if (if_outgoing && if_incoming == if_outgoing && batadv_is_wifi_hardif(if_outgoing)) tq_iface_penalty = batadv_hop_penalty(BATADV_TQ_MAX_VALUE, bat_priv); @@ -1369,7 +1369,7 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, ret = BATADV_NEIGH_DUP; } else { set_mark = 0; - if (is_dup && (ret != BATADV_NEIGH_DUP)) + if (is_dup && ret != BATADV_NEIGH_DUP) ret = BATADV_ORIG_DUP; } @@ -1515,7 +1515,7 @@ batadv_iv_ogm_process_per_outif(const struct sk_buff *skb, int ogm_offset, /* drop packet if sender is not a direct neighbor and if we * don't route towards it */ - if (!is_single_hop_neigh && (!orig_neigh_router)) { + if (!is_single_hop_neigh && !orig_neigh_router) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Drop packet: OGM via unknown neighbor!\n"); goto out_neigh; @@ -1535,7 +1535,7 @@ batadv_iv_ogm_process_per_outif(const struct sk_buff *skb, int ogm_offset, sameseq = orig_ifinfo->last_real_seqno == ntohl(ogm_packet->seqno); similar_ttl = (orig_ifinfo->last_ttl - 3) <= ogm_packet->ttl; - if (is_bidirect && ((dup_status == BATADV_NO_DUP) || + if (is_bidirect && (dup_status == BATADV_NO_DUP || (sameseq && similar_ttl))) { batadv_iv_ogm_orig_update(bat_priv, orig_node, orig_ifinfo, ethhdr, @@ -1553,8 +1553,8 @@ batadv_iv_ogm_process_per_outif(const struct sk_buff *skb, int ogm_offset, /* OGMs from secondary interfaces should only scheduled once * per interface where it has been received, not multiple times */ - if ((ogm_packet->ttl <= 2) && - (if_incoming != if_outgoing)) { + if (ogm_packet->ttl <= 2 && + if_incoming != if_outgoing) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Drop packet: OGM from secondary interface and wrong outgoing interface\n"); goto out_neigh; @@ -1590,7 +1590,7 @@ batadv_iv_ogm_process_per_outif(const struct sk_buff *skb, int ogm_offset, if_incoming, if_outgoing); out_neigh: - if ((orig_neigh_node) && (!is_single_hop_neigh)) + if (orig_neigh_node && !is_single_hop_neigh) batadv_orig_node_put(orig_neigh_node); out: if (router_ifinfo) @@ -2523,9 +2523,9 @@ batadv_iv_gw_get_best_gw_node(struct batadv_priv *bat_priv) tmp_gw_factor *= 100 * 100; tmp_gw_factor >>= 18; - if ((tmp_gw_factor > max_gw_factor) || - ((tmp_gw_factor == max_gw_factor) && - (tq_avg > max_tq))) { + if (tmp_gw_factor > max_gw_factor || + (tmp_gw_factor == max_gw_factor && + tq_avg > max_tq)) { if (curr_gw) batadv_gw_node_put(curr_gw); curr_gw = gw_node; diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index 4e2724c5..93ef1c06 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -767,7 +767,7 @@ batadv_v_gw_get_best_gw_node(struct batadv_priv *bat_priv) if (batadv_v_gw_throughput_get(gw_node, &bw) < 0) goto next; - if (curr_gw && (bw <= max_bw)) + if (curr_gw && bw <= max_bw) goto next; if (curr_gw) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index bd1064d9..1de992c5 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -134,7 +134,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX; throughput = link_settings.base.speed; - if (throughput && (throughput != SPEED_UNKNOWN)) + if (throughput && throughput != SPEED_UNKNOWN) return throughput * 10; } @@ -263,8 +263,8 @@ static void batadv_v_elp_periodic_work(struct work_struct *work) goto out; /* we are in the process of shutting this interface down */ - if ((hard_iface->if_status == BATADV_IF_NOT_IN_USE) || - (hard_iface->if_status == BATADV_IF_TO_BE_REMOVED)) + if (hard_iface->if_status == BATADV_IF_NOT_IN_USE || + hard_iface->if_status == BATADV_IF_TO_BE_REMOVED) goto out; /* the interface was enabled but may not be ready yet */ diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c index 8be61734..c251445a 100644 --- a/net/batman-adv/bat_v_ogm.c +++ b/net/batman-adv/bat_v_ogm.c @@ -304,8 +304,8 @@ static u32 batadv_v_forward_penalty(struct batadv_priv *bat_priv, * due to the store & forward characteristics of WIFI. * Very low throughput values are the exception. */ - if ((throughput > 10) && - (if_incoming == if_outgoing) && + if (throughput > 10 && + if_incoming == if_outgoing && !(if_incoming->bat_v.flags & BATADV_FULL_DUPLEX)) return throughput / 2; @@ -455,7 +455,7 @@ static int batadv_v_ogm_metric_update(struct batadv_priv *bat_priv, /* drop packets with old seqnos, however accept the first packet after * a host has been rebooted. */ - if ((seq_diff < 0) && !protection_started) + if (seq_diff < 0 && !protection_started) goto out; neigh_node->last_seen = jiffies; @@ -568,8 +568,8 @@ static bool batadv_v_ogm_route_update(struct batadv_priv *bat_priv, router_throughput = router_ifinfo->bat_v.throughput; neigh_throughput = neigh_ifinfo->bat_v.throughput; - if ((neigh_seq_diff < BATADV_OGM_MAX_ORIGDIFF) && - (router_throughput >= neigh_throughput)) + if (neigh_seq_diff < BATADV_OGM_MAX_ORIGDIFF && + router_throughput >= neigh_throughput) goto out; } @@ -621,7 +621,7 @@ batadv_v_ogm_process_per_outif(struct batadv_priv *bat_priv, return; /* only unknown & newer OGMs contain TVLVs we are interested in */ - if ((seqno_age > 0) && (if_outgoing == BATADV_IF_DEFAULT)) + if (seqno_age > 0 && if_outgoing == BATADV_IF_DEFAULT) batadv_tvlv_containers_process(bat_priv, true, orig_node, NULL, NULL, (unsigned char *)(ogm2 + 1), diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index b6cfa78e..760c0de7 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -492,8 +492,8 @@ static bool batadv_is_orig_node_eligible(struct batadv_dat_candidate *res, /* this is an hash collision with the temporary selected node. Choose * the one with the lowest address */ - if ((tmp_max == max) && max_orig_node && - (batadv_compare_eth(candidate->orig, max_orig_node->orig) > 0)) + if (tmp_max == max && max_orig_node && + batadv_compare_eth(candidate->orig, max_orig_node->orig) > 0) goto out; ret = true; diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index de9955d5..10d521f0 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -248,12 +248,12 @@ void batadv_gw_election(struct batadv_priv *bat_priv) } } - if ((curr_gw) && (!next_gw)) { + if (curr_gw && !next_gw) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Removing selected gateway - no gateway in range\n"); batadv_throw_uevent(bat_priv, BATADV_UEV_GW, BATADV_UEV_DEL, NULL); - } else if ((!curr_gw) && (next_gw)) { + } else if (!curr_gw && next_gw) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Adding route to gateway %pM (bandwidth: %u.%u/%u.%u MBit, tq: %i)\n", next_gw->orig_node->orig, @@ -411,8 +411,8 @@ void batadv_gw_node_update(struct batadv_priv *bat_priv, goto out; } - if ((gw_node->bandwidth_down == ntohl(gateway->bandwidth_down)) && - (gw_node->bandwidth_up == ntohl(gateway->bandwidth_up))) + if (gw_node->bandwidth_down == ntohl(gateway->bandwidth_down) && + gw_node->bandwidth_up == ntohl(gateway->bandwidth_up)) goto out; batadv_dbg(BATADV_DBG_BATMAN, bat_priv, diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c index 33940c5c..2c26039c 100644 --- a/net/batman-adv/gateway_common.c +++ b/net/batman-adv/gateway_common.c @@ -56,8 +56,8 @@ bool batadv_parse_throughput(struct net_device *net_dev, char *buff, if (strncasecmp(tmp_ptr, "mbit", 4) == 0) bw_unit_type = BATADV_BW_UNIT_MBIT; - if ((strncasecmp(tmp_ptr, "kbit", 4) == 0) || - (bw_unit_type == BATADV_BW_UNIT_MBIT)) + if (strncasecmp(tmp_ptr, "kbit", 4) == 0 || + bw_unit_type == BATADV_BW_UNIT_MBIT) *tmp_ptr = '\0'; } @@ -190,7 +190,7 @@ ssize_t batadv_gw_bandwidth_set(struct net_device *net_dev, char *buff, if (!up_new) up_new = 1; - if ((down_curr == down_new) && (up_curr == up_new)) + if (down_curr == down_new && up_curr == up_new) return count; batadv_gw_reselect(bat_priv); @@ -224,16 +224,16 @@ static void batadv_gw_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, /* only fetch the tvlv value if the handler wasn't called via the * CIFNOTFND flag and if there is data to fetch */ - if ((flags & BATADV_TVLV_HANDLER_OGM_CIFNOTFND) || - (tvlv_value_len < sizeof(gateway))) { + if (flags & BATADV_TVLV_HANDLER_OGM_CIFNOTFND || + tvlv_value_len < sizeof(gateway)) { gateway.bandwidth_down = 0; gateway.bandwidth_up = 0; } else { gateway_ptr = tvlv_value; gateway.bandwidth_down = gateway_ptr->bandwidth_down; gateway.bandwidth_up = gateway_ptr->bandwidth_up; - if ((gateway.bandwidth_down == 0) || - (gateway.bandwidth_up == 0)) { + if (gateway.bandwidth_down == 0 || + gateway.bandwidth_up == 0) { gateway.bandwidth_down = 0; gateway.bandwidth_up = 0; } @@ -242,8 +242,8 @@ static void batadv_gw_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, batadv_gw_node_update(bat_priv, orig, &gateway); /* restart gateway selection */ - if ((gateway.bandwidth_down != 0) && - (atomic_read(&bat_priv->gw.mode) == BATADV_GW_MODE_CLIENT)) + if (gateway.bandwidth_down != 0 && + atomic_read(&bat_priv->gw.mode) == BATADV_GW_MODE_CLIENT) batadv_gw_check_election(bat_priv, orig); } diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index e348f76e..d4aa99c0 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -504,8 +504,8 @@ static void batadv_check_known_mac_addr(const struct net_device *net_dev) rcu_read_lock(); list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) { - if ((hard_iface->if_status != BATADV_IF_ACTIVE) && - (hard_iface->if_status != BATADV_IF_TO_BE_ACTIVATED)) + if (hard_iface->if_status != BATADV_IF_ACTIVE && + hard_iface->if_status != BATADV_IF_TO_BE_ACTIVATED) continue; if (hard_iface->net_dev == net_dev) @@ -568,8 +568,8 @@ int batadv_hardif_min_mtu(struct net_device *soft_iface) rcu_read_lock(); list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) { - if ((hard_iface->if_status != BATADV_IF_ACTIVE) && - (hard_iface->if_status != BATADV_IF_TO_BE_ACTIVATED)) + if (hard_iface->if_status != BATADV_IF_ACTIVE && + hard_iface->if_status != BATADV_IF_TO_BE_ACTIVATED) continue; if (hard_iface->soft_iface != soft_iface) @@ -654,8 +654,8 @@ batadv_hardif_activate_interface(struct batadv_hard_iface *hard_iface) static void batadv_hardif_deactivate_interface(struct batadv_hard_iface *hard_iface) { - if ((hard_iface->if_status != BATADV_IF_ACTIVE) && - (hard_iface->if_status != BATADV_IF_TO_BE_ACTIVATED)) + if (hard_iface->if_status != BATADV_IF_ACTIVE && + hard_iface->if_status != BATADV_IF_TO_BE_ACTIVATED) return; hard_iface->if_status = BATADV_IF_INACTIVE; diff --git a/net/batman-adv/icmp_socket.c b/net/batman-adv/icmp_socket.c index 8ead2928..bded3112 100644 --- a/net/batman-adv/icmp_socket.c +++ b/net/batman-adv/icmp_socket.c @@ -132,10 +132,10 @@ static ssize_t batadv_socket_read(struct file *file, char __user *buf, size_t packet_len; int error; - if ((file->f_flags & O_NONBLOCK) && (socket_client->queue_len == 0)) + if ((file->f_flags & O_NONBLOCK) && socket_client->queue_len == 0) return -EAGAIN; - if ((!buf) || (count < sizeof(struct batadv_icmp_packet))) + if (!buf || count < sizeof(struct batadv_icmp_packet)) return -EINVAL; if (!access_ok(VERIFY_WRITE, buf, count)) diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index fb381fb2..033819ae 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -544,8 +544,8 @@ batadv_recv_handler_register(u8 packet_type, struct batadv_hard_iface *); curr = batadv_rx_handler[packet_type]; - if ((curr != batadv_recv_unhandled_packet) && - (curr != batadv_recv_unhandled_unicast_packet)) + if (curr != batadv_recv_unhandled_packet && + curr != batadv_recv_unhandled_unicast_packet) return -EBUSY; batadv_rx_handler[packet_type] = recv_handler; diff --git a/net/batman-adv/multicast.c b/net/batman-adv/multicast.c index d3276706..e553a877 100644 --- a/net/batman-adv/multicast.c +++ b/net/batman-adv/multicast.c @@ -1126,7 +1126,7 @@ static void batadv_mcast_tvlv_ogm_handler(struct batadv_priv *bat_priv, bool orig_initialized; if (orig_mcast_enabled && tvlv_value && - (tvlv_value_len >= sizeof(mcast_flags))) + tvlv_value_len >= sizeof(mcast_flags)) mcast_flags = *(u8 *)tvlv_value; spin_lock_bh(&orig->mcast_handler_lock); diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 8e2a4b20..2967b86c 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -1062,9 +1062,9 @@ batadv_purge_neigh_ifinfo(struct batadv_priv *bat_priv, continue; /* don't purge if the interface is not (going) down */ - if ((if_outgoing->if_status != BATADV_IF_INACTIVE) && - (if_outgoing->if_status != BATADV_IF_NOT_IN_USE) && - (if_outgoing->if_status != BATADV_IF_TO_BE_REMOVED)) + if (if_outgoing->if_status != BATADV_IF_INACTIVE && + if_outgoing->if_status != BATADV_IF_NOT_IN_USE && + if_outgoing->if_status != BATADV_IF_TO_BE_REMOVED) continue; batadv_dbg(BATADV_DBG_BATMAN, bat_priv, @@ -1106,9 +1106,9 @@ batadv_purge_orig_ifinfo(struct batadv_priv *bat_priv, continue; /* don't purge if the interface is not (going) down */ - if ((if_outgoing->if_status != BATADV_IF_INACTIVE) && - (if_outgoing->if_status != BATADV_IF_NOT_IN_USE) && - (if_outgoing->if_status != BATADV_IF_TO_BE_REMOVED)) + if (if_outgoing->if_status != BATADV_IF_INACTIVE && + if_outgoing->if_status != BATADV_IF_NOT_IN_USE && + if_outgoing->if_status != BATADV_IF_TO_BE_REMOVED) continue; batadv_dbg(BATADV_DBG_BATMAN, bat_priv, @@ -1155,13 +1155,13 @@ batadv_purge_orig_neighbors(struct batadv_priv *bat_priv, last_seen = neigh_node->last_seen; if_incoming = neigh_node->if_incoming; - if ((batadv_has_timed_out(last_seen, BATADV_PURGE_TIMEOUT)) || - (if_incoming->if_status == BATADV_IF_INACTIVE) || - (if_incoming->if_status == BATADV_IF_NOT_IN_USE) || - (if_incoming->if_status == BATADV_IF_TO_BE_REMOVED)) { - if ((if_incoming->if_status == BATADV_IF_INACTIVE) || - (if_incoming->if_status == BATADV_IF_NOT_IN_USE) || - (if_incoming->if_status == BATADV_IF_TO_BE_REMOVED)) + if (batadv_has_timed_out(last_seen, BATADV_PURGE_TIMEOUT) || + if_incoming->if_status == BATADV_IF_INACTIVE || + if_incoming->if_status == BATADV_IF_NOT_IN_USE || + if_incoming->if_status == BATADV_IF_TO_BE_REMOVED) { + if (if_incoming->if_status == BATADV_IF_INACTIVE || + if_incoming->if_status == BATADV_IF_NOT_IN_USE || + if_incoming->if_status == BATADV_IF_TO_BE_REMOVED) batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "neighbor purge: originator %pM, neighbor: %pM, iface: %s\n", orig_node->orig, neigh_node->addr, diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index f10e3ff2..40d9bf3e 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -93,14 +93,14 @@ static void _batadv_update_route(struct batadv_priv *bat_priv, batadv_orig_ifinfo_put(orig_ifinfo); /* route deleted */ - if ((curr_router) && (!neigh_node)) { + if (curr_router && !neigh_node) { batadv_dbg(BATADV_DBG_ROUTES, bat_priv, "Deleting route towards: %pM\n", orig_node->orig); batadv_tt_global_del_orig(bat_priv, orig_node, -1, "Deleted route towards originator"); /* route added */ - } else if ((!curr_router) && (neigh_node)) { + } else if (!curr_router && neigh_node) { batadv_dbg(BATADV_DBG_ROUTES, bat_priv, "Adding route towards: %pM (via %pM)\n", orig_node->orig, neigh_node->addr); @@ -381,7 +381,7 @@ int batadv_recv_icmp_packet(struct sk_buff *skb, /* add record route information if not full */ if ((icmph->msg_type == BATADV_ECHO_REPLY || icmph->msg_type == BATADV_ECHO_REQUEST) && - (skb->len >= sizeof(struct batadv_icmp_packet_rr))) { + skb->len >= sizeof(struct batadv_icmp_packet_rr)) { if (skb_linearize(skb) < 0) goto free_skb; diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c index 054a65e6..7895323f 100644 --- a/net/batman-adv/send.c +++ b/net/batman-adv/send.c @@ -142,7 +142,7 @@ int batadv_send_unicast_skb(struct sk_buff *skb, #ifdef CONFIG_BATMAN_ADV_BATMAN_V hardif_neigh = batadv_hardif_neigh_get(neigh->if_incoming, neigh->addr); - if ((hardif_neigh) && (ret != NET_XMIT_DROP)) + if (hardif_neigh && ret != NET_XMIT_DROP) hardif_neigh->bat_v.last_unicast_tx = jiffies; if (hardif_neigh) @@ -615,8 +615,8 @@ batadv_forw_packet_list_steal(struct hlist_head *forw_list, * we delete only packets belonging to the given interface */ if (hard_iface && - (forw_packet->if_incoming != hard_iface) && - (forw_packet->if_outgoing != hard_iface)) + forw_packet->if_incoming != hard_iface && + forw_packet->if_outgoing != hard_iface) continue; hlist_del(&forw_packet->list); diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 10f7edfb..1f8af19a 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -160,7 +160,7 @@ static int batadv_interface_set_mac_addr(struct net_device *dev, void *p) static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu) { /* check ranges */ - if ((new_mtu < 68) || (new_mtu > batadv_hardif_min_mtu(dev))) + if (new_mtu < 68 || new_mtu > batadv_hardif_min_mtu(dev)) return -EINVAL; dev->mtu = new_mtu; diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index 0ae8b30e..aa187fd4 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -925,8 +925,8 @@ static int batadv_store_mesh_iface_finish(struct net_device *net_dev, if (hard_iface->if_status == status_tmp) goto out; - if ((hard_iface->soft_iface) && - (strncmp(hard_iface->soft_iface->name, ifname, IFNAMSIZ) == 0)) + if (hard_iface->soft_iface && + strncmp(hard_iface->soft_iface->name, ifname, IFNAMSIZ) == 0) goto out; if (status_tmp == BATADV_IF_NOT_IN_USE) { diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index bfe8effe..4b90033f 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -1206,7 +1206,7 @@ static int batadv_tp_send_ack(struct batadv_priv *bat_priv, const u8 *dst, /* send the ack */ r = batadv_send_skb_to_orig(skb, orig_node, NULL); - if (unlikely(r < 0) || (r == NET_XMIT_DROP)) { + if (unlikely(r < 0) || r == NET_XMIT_DROP) { ret = BATADV_TP_REASON_DST_UNREACHABLE; goto out; } -- 2.11.0

1 0

[B.A.T.M.A.N.] batman on top of vlan?
by dan 22 Aug '17

22 Aug '17

Can batman operate on top of a vlan? For example, a wireless link with MTU of 1532 to accommodate both batman and the vlan. Plugs into the batman-adv box on eth0, configure eth0.10 and add eth0.10 to bat0. This is meant to solve a specific issue of needing non-batman-adv access to the radio web-ui's on the native/untagged vlan1 thanks.

3 4

[B.A.T.M.A.N.] can batman-adv carry a vlan?
by dan 20 Aug '17

20 Aug '17

Can batman-adv carry a vlan? For example, 2 mesh nodes are directly connected via eth0 on both devices. bat0 contains eth0 on both devices. Can a bat0.20 vlan be created on each side and will batman-adv pass traffic assuming 1532 MTU is set?

2 3

[B.A.T.M.A.N.] wired performance
by dan 20 Aug '17

20 Aug '17

Anyone done any performance testing over wired links? ie, if two ethernet ports are gigabit and are added to bat0, what kind of throughput is expected across these interfaces and how much CPU is needed to get up near wire-speed?

3 5

Re: [B.A.T.M.A.N.] Manually Updating Translation table
by Linus Lüssing 16 Aug '17

16 Aug '17

Hi Kartik, Have you considered using a Linux bridge? That's usually the most common and easiest approach to get external clients into a batman-adv mesh network. batman-adv will learn MAC addresses from passed through traffic automatically. Regards, Linus On Wed, Aug 16, 2017 at 05:05:27PM +0200, Kartikeswar Koppula via B.A.T.M.A.N wrote: > Date: Wed, 16 Aug 2017 17:05:27 +0200 > From: Kartikeswar Koppula <kartik(a)corenetdynamics.com> > To: The list for a Better Approach To Mobile Ad-hoc Networking > <b.a.t.m.a.n(a)lists.open-mesh.org> > Subject: Re: [B.A.T.M.A.N.] Manually Updating Translation table > > HI Linus, > > Thanks a lot for the reply. I will try to do what you have described. > > I am trying to use BATMAN for mesh networking of mobile Networks, > where the Mobile Gateway would be the BATMAN Node and UE (Client) is > not a batman node. > So I want to add UE's entry in Mobile Gateway's local translation > table manually which will be broadcast-ed in OGM to other Mobile > Gateway BATMAN nodes thereby UE's (clients) connected to other > Gateway's will be able to reach UE's connected to first mobile > gateway. > > Best Regards, > Kartik > > On Wed, Aug 16, 2017 at 4:47 PM, Linus Lüssing <linus.luessing(a)c0d3.blue> wrote: > > Hi, > > > > Currently, no there isn't. The only thing you could do to manually > > add an entry from inside a node is by crafting a dummy packet with > > the desired ethernet source address and transmit it on bat0. That > > way batman-adv would add that MAC address. Deleting only happens > > after a timeout though, no way to force it manually. > > > > In case you are thinking about implementing such a feature: > > The Linux bridge has a feature like that to update the FDB > > (forwarding database, for unicast addresses) or MDB (multicast > > database). It uses netlink for that and you can use > > /usr/sbin/bridge to easily add and remove entries from userspace. > > That'd probably be the approach to mimic in batman-adv for such a > > feature. > > > > Regards, Linus > > > > PS: Out of curiousity, could you share what you'd need such a > > feature for? > > > > > > On Wed, Aug 16, 2017 at 03:57:29PM +0200, Kartikeswar K wrote: > >> Dear BATMAN Community members, > >> > >> I am new to BATMAN Mesh network and looking forward for answer to my > >> query related to updating Local Translation Table in a BATMAN Node. > >> > >> I would like to make a mesh network where I would like to update the > >> client entry in Local Translation manually. Is it possible to add the > >> entry manually in translation table? > >> If so, I would like to know how can I update this table in BATMAN from > >> user space? > >> > >> Thanks in advance and would appreciate your responses. > >> > >> Thanks & Regards, > >> Kartikeswar Koppula > >> kartikeswar(a)gmail.com

1 0

[B.A.T.M.A.N.] Manually Updating Translation table
by Kartikeswar K 16 Aug '17

16 Aug '17

Dear BATMAN Community members, I am new to BATMAN Mesh network and looking forward for answer to my query related to updating Local Translation Table in a BATMAN Node. I would like to make a mesh network where I would like to update the client entry in Local Translation manually. Is it possible to add the entry manually in translation table? If so, I would like to know how can I update this table in BATMAN from user space? Thanks in advance and would appreciate your responses. Thanks & Regards, Kartikeswar Koppula kartikeswar(a)gmail.com

3 2

[B.A.T.M.A.N.] No bandwidth over wired Batman mesh network
by Mattias Vanhoutte 10 Aug '17

10 Aug '17

Hi, I am trying to use B.A.T.M.A.N. on a wired mesh network (ethx interfaces) version: batctl 2017.0 [batman-adv: 2017.0.1], but I got very/no bandwith over the BATMAN interfaces. I have PC1 which is Intel based, 64 bit, kernel 4.9.0-3-amd64, OS is Debian, build batman from sources: - eth0 10.1.98.250/24 address - bat0 172.16.100.250/24 address I have PC2 which is ARM based, 32 bit, kernel 4.6.0-xilinx-v2016.3, OS is yocto build, build batman from sources - eth0 10.1.98.3/24 address - bat0 172.16.100.1/24 address PC1 and PC2 are directly connected with ethernet cable (no switch in the network) I did network measurements with iperf (TCP and UDP) between PC1 and PC2 in 2 conditions: - Without using batman, I got symmectric bandwidth between PC1 and PC2 (measured TCP and UDP on ethx interface), TCP bandwidth is 300-400 Mbits/sec - With using batman, I got something strange: bandwidh PC1 -> PC2 is 22 Kbit/sec and bandwidth PC2 -> PC1 is 110 Mbit/sec (measured TCP on bat0 interfaces) Also for UDP measurements I got bandwidth=0 measured PC1 -> PC2 and 222 Mbit/sec PC2 -> PC1 There is no firewall active on both devices. Does anybody has an idea why I got no bandwidth in 1 Direction? Is there something I should configure when I build and want to use batman on 2 different types of operating systems / CPU? I also did tests between 2 devices of type PC2, then I got symmetric bandwidths in both directions: - without using batman: 430 Mbits/s in both directions PC1 <> PC2 - with using batman: 125 Mbit/s in both directions PC1 <> PC2 So here I see a large drop of the TCP bandwidth by using batman 430 -> 125 Mbit/s. Is this normal behavior? Can anybody tell me where and how I can see debug messages from Batman? Kind Regards, Mattias Vanhoutte

2 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

B.A.T.M.A.N