B.A.T.M.A.N

b.a.t.m.a.n@lists.open-mesh.org

15 participants
4308 discussions

[B.A.T.M.A.N.] [PATCH v2] batman-adv: Add lockdep assert for container_list_lock
by Sven Eckelmann 29 Dec '15

29 Dec '15

The batadv_tvlv_container* functions state in their kernel-doc that they require tvlv.container_list_lock. Add an assert to automatically detect when this might have been ignored by the caller. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- v2: remove this from the kref patchset and instead submit it as standalone patch net/batman-adv/main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 19ad0bb..c9b8205 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -720,6 +720,8 @@ static struct batadv_tvlv_container { struct batadv_tvlv_container *tvlv_tmp, *tvlv = NULL; + lockdep_assert_held(&bat_priv->tvlv.container_list_lock); + hlist_for_each_entry(tvlv_tmp, &bat_priv->tvlv.container_list, list) { if (tvlv_tmp->tvlv_hdr.type != type) continue; @@ -752,6 +754,8 @@ static u16 batadv_tvlv_container_list_size(struct batadv_priv *bat_priv) struct batadv_tvlv_container *tvlv; u16 tvlv_len = 0; + lockdep_assert_held(&bat_priv->tvlv.container_list_lock); + hlist_for_each_entry(tvlv, &bat_priv->tvlv.container_list, list) { tvlv_len += sizeof(struct batadv_tvlv_hdr); tvlv_len += ntohs(tvlv->tvlv_hdr.len); -- 2.6.4

2 1

Re: [B.A.T.M.A.N.] Super high package loss and weak connection
by Sven Eckelmann 21 Dec '15

21 Dec '15

On Friday 18 December 2015 18:22:40 no name wrote: > I made a little table were I tried wheezy against jessy and 802.11 as > someone suggested earlier in the mailing list to me. I placed the > raspberries next to each other on my table and tested through different > settings: > > ad-hoc+batman-2014.X@debian wheezy: 1m distance .. 200 pings, 0% > paket loss, reply time -> (min,avg,max,mdev 1.2ms, 1.8ms, 6.4ms, 0.8ms) > ad-hoc+batman-2015.2@debian jessie: 1m distance .. 200 pings, > 6% paket loss, reply time -> (min,avg,max,mdev 1.1ms, 170ms, 1400ms, 370ms) > 802.11s @debian jessie: 1m distance .. > 200 pings, 0% paket loss, reply time -> (min,avg,max,mdev 1.05ms, 1.8ms, > 14ms, 1.5ms) Your "table" is incomplete. adhoc without batman-adv and meshpoint (802.11s without fwding+ttl=1)+batman-adv are missing. You also mixed two different batman-adv versions. Either you use the same batman-adv version everywhere or make sure that the kernel+wifi driver doesn't change. Changing multiple variables between two tests tests make the results more or less useless for comparisons. Kind regards, Sven

2 1

[B.A.T.M.A.N.] alfred dies without log-entries
by 3zl Trizonelabs 21 Dec '15

21 Dec '15

ref: alfred ver 2015.1 / .2 alfred process dies (not in ps ) without leaving any log entry for reason why alfred -r 64 : can't connect to unix socket : Connetion refused remains : /tmp/run/ alfred.pid alfred.sock batadv-vis still in process-list and shows data alfred stop does not kill the remains start / restart / reload does not bring alfred up system reboot required occurence : frequent irregular at start or after some time afred.facters disabled does anybody have any hint or idea ? cheers 3zl

1 0

[B.A.T.M.A.N.] Missing patches in net-next
by Sven Eckelmann 21 Dec '15

21 Dec '15

Hi, it seems a bunch of patches are missing in net-next from batman-adv next's branch. An incorrect lockdep_assert was fixed to refer to the correct lock. The flag FIRST_HOP was dropped because it is not used anymore in the batman-adv compat version 15. The bridge loop avoidance code will now cleanup its internal state when it gets disabled. This is required to reset itself in case it gets restarted again. Also the behavior when the user tries to enable the already started bridge loop avoidance was modified to just ignore this trigger. It was also tuned to better cope with networks using very lossy links. The rest are only contain minor cleanups of the code, updates of the documentation and kerneldoc inside the batman-adv source code. Kind regards, Sven Antonio Quartulli (3): batman-adv: fix kerneldoc for DAT functions batman-adv: fix kerneldoc for TT functions batman-adv: add kernel doc for AP isolation attributes in bat_priv Marek Lindner (2): batman-adv: remove leftovers of unused BATADV_PRIMARIES_FIRST_HOP flag batman-adv: kernel doc readability updates Markus Elfring (4): batman-adv: Delete unnecessary checks before the function call "kfree_skb" batman-adv: Less checks in batadv_tvlv_unicast_send() batman-adv: Delete an unnecessary check before the function call "batadv_softif_vlan_free_ref" batman-adv: Split a condition check Simon Wunderlich (5): batman-adv: Start new development cycle batman-adv: purge bridge loop avoidance when its disabled batman-adv: increase BLA wait periods to 6 batman-adv: only call post function if something changed batman-adv: Update/repair bridge loop avoidance kerneldoc Sven Eckelmann (14): batman-adv: Fix lockdep annotation of batadv_tlv_container_remove batman-adv: Add function to convert string to batadv throughput batman-adv: Change ifconfig examples to iproute2 batman-adv: Fix kernel-doc parsing of main structs batman-adv: Fix kerneldoc member names in for main structs batman-adv: Remove kerneldoc for missing struct members batman-adv: Add kerneldoc for batadv_neigh_node::refcount batman-adv: Fix kerneldoc parsing of structs/enums batman-adv: Remove kerneldoc for missing parameters batman-adv: Fix names in kerneldoc of functions batman-adv: Drop invalid kerneldoc for variable batadv_vlan_attrs batman-adv: Fix kerneldoc parsing of return description batman-adv: Fix kerneldoc of main functions batman-adv: Fix kerneldoc of network-coding functions Documentation/networking/batman-adv.txt | 9 +- net/batman-adv/bat_iv_ogm.c | 21 ++- net/batman-adv/bitarray.c | 12 +- net/batman-adv/bitarray.h | 12 +- net/batman-adv/bridge_loop_avoidance.c | 247 ++++++++++++++++++++++++-------- net/batman-adv/bridge_loop_avoidance.h | 2 + net/batman-adv/debugfs.c | 6 + net/batman-adv/distributed-arp-table.c | 41 +++--- net/batman-adv/fragmentation.c | 18 +-- net/batman-adv/fragmentation.h | 2 +- net/batman-adv/gateway_client.c | 14 +- net/batman-adv/gateway_common.c | 119 +++++++-------- net/batman-adv/hard-interface.c | 7 +- net/batman-adv/hash.h | 22 +-- net/batman-adv/main.c | 45 +++--- net/batman-adv/main.h | 21 ++- net/batman-adv/multicast.c | 35 +++-- net/batman-adv/multicast.h | 2 +- net/batman-adv/network-coding.c | 59 ++++---- net/batman-adv/originator.c | 54 ++++--- net/batman-adv/packet.h | 20 +-- net/batman-adv/routing.c | 36 +++-- net/batman-adv/send.c | 32 +++-- net/batman-adv/send.h | 4 +- net/batman-adv/soft-interface.c | 18 +-- net/batman-adv/sysfs.c | 31 ++-- net/batman-adv/translation-table.c | 125 +++++++++------- net/batman-adv/types.h | 60 ++++---- 28 files changed, 650 insertions(+), 424 deletions(-)

1 0

[B.A.T.M.A.N.] [PATCH 01/23] batman-adv: Fix list removal of batadv_hardif_neigh_node
by Sven Eckelmann 19 Dec '15

19 Dec '15

The neigh_list with batadv_hardif_neigh_node objects is accessed with only rcu_read_lock in batadv_neigh_node_get and batadv_iv_neigh_print. Thus is is not allowed to kfree the object before the rcu grace period ends which may still tries to access this object. Therefore the object has first to be removed from the neigh_list and then it has either wait with synchronize_rcu or call_rcu till the grace period ends before it can be freed. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- I have no idea why batadv_hardif_neigh_free_now is considered to be safe to call. The only caller is batadv_neigh_node_free_rcu but this function never makes sure that the previously mentioned two functions are actually not accessing it right now when hlist_del_rcu_init + kfree is called. --- net/batman-adv/originator.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 00b0437..2681c7d 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -217,10 +217,6 @@ static void batadv_hardif_neigh_free_rcu(struct rcu_head *rcu) hardif_neigh = container_of(rcu, struct batadv_hardif_neigh_node, rcu); - spin_lock_bh(&hardif_neigh->if_incoming->neigh_list_lock); - hlist_del_init_rcu(&hardif_neigh->list); - spin_unlock_bh(&hardif_neigh->if_incoming->neigh_list_lock); - batadv_hardif_free_ref_now(hardif_neigh->if_incoming); kfree(hardif_neigh); } @@ -233,8 +229,13 @@ static void batadv_hardif_neigh_free_rcu(struct rcu_head *rcu) static void batadv_hardif_neigh_free_now(struct batadv_hardif_neigh_node *hardif_neigh) { - if (atomic_dec_and_test(&hardif_neigh->refcount)) + if (atomic_dec_and_test(&hardif_neigh->refcount)) { + spin_lock_bh(&hardif_neigh->if_incoming->neigh_list_lock); + hlist_del_init_rcu(&hardif_neigh->list); + spin_unlock_bh(&hardif_neigh->if_incoming->neigh_list_lock); + batadv_hardif_neigh_free_rcu(&hardif_neigh->rcu); + } } /** @@ -244,8 +245,13 @@ batadv_hardif_neigh_free_now(struct batadv_hardif_neigh_node *hardif_neigh) */ void batadv_hardif_neigh_free_ref(struct batadv_hardif_neigh_node *hardif_neigh) { - if (atomic_dec_and_test(&hardif_neigh->refcount)) + if (atomic_dec_and_test(&hardif_neigh->refcount)) { + spin_lock_bh(&hardif_neigh->if_incoming->neigh_list_lock); + hlist_del_init_rcu(&hardif_neigh->list); + spin_unlock_bh(&hardif_neigh->if_incoming->neigh_list_lock); + call_rcu(&hardif_neigh->rcu, batadv_hardif_neigh_free_rcu); + } } /** -- 2.6.4

1 23

[B.A.T.M.A.N.] Super high package loss and weak connection
by no name 18 Dec '15

18 Dec '15

Hello there Hallo (deutsche Version unten) I have a simple batman setup that does behave odd: Raspberry b+, jessie, batman-adv2015.2 witha single LOGILINK WL0084B USB wifi stick attached I have 5 rasperries that can see each other via wifi (one of them is a gw(BASE2), one of them (SHELF_1) is not directly reachable by the gw, because they are in a line from one room to another and has to be reached via one single hop in between) digraph { { "BASE_2" } "BASE_2" -> "SHELF_3 @ ra" [label="1.689"] "BASE_2" -> "SHELF_5 @ Bar" [label="1.689"] "BASE_2" -> "SHELF_2 @ CD Regal" [label="2.161"] "BASE_2" -> "SHELF_4 @ Toaster" [label="2.161"] "BASE_2" -> "SHELF_1 @ Chris" [label="2.040"] subgraph "cluster_SHELF_3 @ ra" { "SHELF_3 @ ra" } "SHELF_3 @ ra" -> "SHELF_5 @ Bar" [label="1.192"] "SHELF_3 @ ra" -> "SHELF_4 @ Toaster" [label="1.328"] "SHELF_3 @ ra" -> "BASE_2" [label="2.277"] subgraph "cluster_SHELF_4 @ Toaster" { "SHELF_4 @ Toaster" } "SHELF_4 @ Toaster" -> "SHELF_3 @ ra" [label="1.037"] "SHELF_4 @ Toaster" -> "SHELF_2 @ CD Regal" [label="1.483"] "SHELF_4 @ Toaster" -> "SHELF_5 @ Bar" [label="1.175"] "SHELF_4 @ Toaster" -> "SHELF_1 @ Chris" [label="1.371"] "SHELF_4 @ Toaster" -> "BASE_2" [label="3.446"] subgraph "cluster_SHELF_1 @ Chris" { "SHELF_1 @ Chris" } "SHELF_1 @ Chris" -> "SHELF_3 @ ra" [label="1.170"] "SHELF_1 @ Chris" -> "SHELF_5 @ Bar" [label="1.020"] subgraph "cluster_SHELF_5 @ Bar" { "SHELF_5 @ Bar" } "SHELF_5 @ Bar" -> "SHELF_3 @ ra" [label="1.045"] "SHELF_5 @ Bar" -> "SHELF_2 @ CD Regal" [label="1.393"] "SHELF_5 @ Bar" -> "SHELF_4 @ Toaster" [label="1.203"] "SHELF_5 @ Bar" -> "SHELF_1 @ Chris" [label="1.226"] "SHELF_5 @ Bar" -> "BASE_2" [label="2.898"] } The problem is, when pinging ANY of the clients from the base (or any client from any other client) I always have a package loss of roughly 50% with a ping reply time up to 10ms sometimes (BASE2 -> SHELF_1, the closer ones are faster). To make things worse, the connection is so weak, even a ssh login may bring it down. I tried quite a few different settings and already updated to the new version and used multiple USB sticks - the result always stays the same. Now I am out of ideas and I would appreciate some new ideas. GERMAN: Ich habe hier 5 Raspberries die sich gegenseitig sehen können (einer ist eine BASIS (BASE2), einer davon (SHELF_1) kann von der Basis nicht direkt gesehen werden, weil sie von einem raum zum nächsten immer größere Distanzen überwinden müssen). Das Problem ist nun, dass wenn ich irgend einen client von der Basis aus pinge, oder irgend einen client von einem anderen client pinge, dass ich rund 50% package loss mit bis zu 10ms antwortzeit habe. Die die sich näher sind funktionieren besser (2ms) die weiter weg sind schlechter. Ich kann nicht mal mit einer ssh konsole von BASE2 auf SHELF_1 so dass ich da sinnvoll was eingeben kann. Ich habe schon einige verschiedene Optionen durchprobiert, wie Beispielsweise Update von 2015.0 auf 2015.2, sogar zwei USB Sticks pro Raspberry PI, aber das Problem bleibt. Nun würde ich um Input bitten, mir sind die Ideen ausgegangen. Danke Thanks a lot! Richard

3 7

[B.A.T.M.A.N.] [PATCH] batman-adv-doc: Fix external links
by Sven Eckelmann 18 Dec '15

18 Dec '15

Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- README | 20 ++++++++++---------- batmand.docbook | 4 ++-- copyright.docbook | 2 +- references.docbook | 2 +- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/README b/README index 8f4ff7d..59ebe63 100644 --- a/README +++ b/README @@ -1,18 +1,18 @@ Requirements ============ - * GNU make - http://www.gnu.org/software/make/ + * GNU make - https://www.gnu.org/software/make/ * xmlto - https://fedorahosted.org/xmlto/ - * docbook-xml (>= 4.5) - http://www.oasis-open.org/docbook/xml/ - * docbook-xsl - http://wiki.docbook.org/topic/DocBookXslStylesheets - * fop - http://xmlgraphics.apache.org/fop/ + * docbook-xml (>= 4.5) - https://www.oasis-open.org/docbook/xml/ + * docbook-xsl - http://wiki.docbook.org/DocBookXslStylesheets + * fop - https://xmlgraphics.apache.org/fop/ * ghostscript - http://www.ghostscript.com/ - * coreutils - http://www.gnu.org/software/coreutils/ + * coreutils - https://www.gnu.org/software/coreutils/coreutils.html * gnuplot - http://gnuplot.sourceforge.net/ - * dia - http://live.gnome.org/Dia - * texlive-latex-base - http://www.tug.org/texlive/ - * texlive-base - http://www.tug.org/texlive/ - * ps2eps - http://www.tm.uka.de/~bless/ps2eps + * dia - https://wiki.gnome.org/action/show/Apps/Dia + * texlive-latex-base - https://www.tug.org/texlive/ + * texlive-base - https://www.tug.org/texlive/ + * ps2eps - https://www.tm.uka.de/~bless/ps2eps * imagemagick - http://www.imagemagick.org/ @@ -31,4 +31,4 @@ Troubleshooting * "libjli.so: cannot open shared object file: No such file or directory" Make sure that /proc is mounted and `/bin/ls -l /proc/self/exe` prints [...] /proc/self/exe -> /bin/ls - See http://bugs.debian.org/435293 for more informations + See https://bugs.debian.org/435293 for more informations diff --git a/batmand.docbook b/batmand.docbook index 9f6c68b..350e9ed 100644 --- a/batmand.docbook +++ b/batmand.docbook @@ -18,7 +18,7 @@ <listitem><para>libpthread</para></listitem> </orderedlist></listitem> <listitem><para>Download the B.A.T.M.A.N. daemon code from the website - <ulink url="http://www.open-mesh.net/wiki/Download" /></para></listitem> + <ulink url="https://www.open-mesh.org/projects/open-mesh/wiki/Download" /></para></listitem> </itemizedlist> </section> <section> @@ -26,7 +26,7 @@ <para>All you have to do is untar and make, then you will see the executable file called <emphasis>batmand</emphasis>.</para> <programlisting><userinput>$ wget \ -http://downloads.open-mesh.net/batman/stable/sources/batman/batman-0.3.tar.gz +https://downloads.open-mesh.org/batman/stable/sources/batman/batman-0.3.tar.gz $ tar xzvf batman-0.3.tar.gz $ cd batman-0.3 $ make</userinput></programlisting> diff --git a/copyright.docbook b/copyright.docbook index 4ec2dff..1cf1d6a 100644 --- a/copyright.docbook +++ b/copyright.docbook @@ -5,6 +5,6 @@ you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. To view a copy of this - license, visit <ulink url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" /> or write to the Free Software Foundation, Inc., 51 Franklin + license, visit <ulink url="https://www.gnu.org/licenses/old-licenses/gpl-2.0.html" /> or write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.</para> </chapter> diff --git a/references.docbook b/references.docbook index 0cd65d3..0cce1d4 100644 --- a/references.docbook +++ b/references.docbook @@ -2,7 +2,7 @@ <section> <title>Reference Links</title> <itemizedlist> - <listitem><ulink url="http://www.open-mesh.net/" /></listitem> + <listitem><ulink url="https://www.open-mesh.org/" /></listitem> <listitem><ulink url="http://www.olsr.org/" /></listitem> </itemizedlist> </section> -- 2.6.2

1 1

[B.A.T.M.A.N.] [PATCH] batman-adv: Switch to HTTPS version of links
by Sven Eckelmann 18 Dec '15

18 Dec '15

open-mesh.org and its subdomains can only be accessed via HTTPS. HTTP-only requests are currently redirected automatically to HTTPS but references in the source code should be only https. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- Documentation/networking/batman-adv.txt | 2 +- MAINTAINERS | 2 +- net/batman-adv/Kconfig | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 58e4904..810becb 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -184,7 +184,7 @@ interfaces to the kernel module settings. For more information, please see the manpage (man batctl). -batctl is available on http://www.open-mesh.org/ +batctl is available on https://www.open-mesh.org/ CONTACT diff --git a/MAINTAINERS b/MAINTAINERS index f3de001..0223cee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2111,7 +2111,7 @@ M: Marek Lindner <mareklindner(a)neomailbox.ch> M: Simon Wunderlich <sw(a)simonwunderlich.de> M: Antonio Quartulli <antonio(a)meshcoding.com> L: b.a.t.m.a.n(a)lists.open-mesh.org -W: http://www.open-mesh.org/ +W: https://www.open-mesh.org/ S: Maintained F: net/batman-adv/ diff --git a/net/batman-adv/Kconfig b/net/batman-adv/Kconfig index c6fc8f7..2dd40e5 100644 --- a/net/batman-adv/Kconfig +++ b/net/batman-adv/Kconfig @@ -12,7 +12,7 @@ config BATMAN_ADV B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See - http://www.open-mesh.org/ for more information and user space + https://www.open-mesh.org/ for more information and user space tools. config BATMAN_ADV_BLA -- 2.6.2

2 2

[B.A.T.M.A.N.] [PATCH] openwrt-feed-batman-adv: Switch to HTTPS version of links
by Sven Eckelmann 18 Dec '15

18 Dec '15

open-mesh.org and its subdomains can only be accessed via HTTPS. HTTP-only requests are currently redirected automatically to HTTPS but references to it should be only https. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> --- batctl-devel/Makefile | 4 ++-- batman-adv-devel/Makefile | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/batctl-devel/Makefile b/batctl-devel/Makefile index 05e2d41..1c93c0b 100644 --- a/batctl-devel/Makefile +++ b/batctl-devel/Makefile @@ -14,7 +14,7 @@ PKG_BATCTL_SHORTREV:=$(shell echo $(PKG_VERSION) | cut -c1-7) PKG_BATCTL_FNAME:=batctl-devel-$(PKG_BATCTL_SHORTREV).tar.gz PKG_BATCTL_DIR:=batctl-$(PKG_BATCTL_SHORTREV) -PKG_SOURCE_URL:=http://git.open-mesh.org/snapshot/ +PKG_SOURCE_URL:=https://git.open-mesh.org/snapshot/ PKG_SOURCE:=$(PKG_BATCTL_FNAME) PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)/$(PKG_BATCTL_DIR) @@ -22,7 +22,7 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)/$(PKG_BATCTL_DIR) include $(INCLUDE_DIR)/package.mk define Package/batctl-devel - URL:=http://www.open-mesh.org/ + URL:=https://www.open-mesh.org/ SECTION:=net CATEGORY:=Network DEPENDS:=+kmod-batman-adv-devel +libnl-tiny +libc diff --git a/batman-adv-devel/Makefile b/batman-adv-devel/Makefile index 9971e22..0d63ab3 100644 --- a/batman-adv-devel/Makefile +++ b/batman-adv-devel/Makefile @@ -15,7 +15,7 @@ PKG_BATMAN_SHORTREV:=$(shell echo $(PKG_VERSION) | cut -c1-7) PKG_BATMAN_FNAME:=batman-adv-devel-$(PKG_BATMAN_SHORTREV).tar.gz PKG_BATMAN_DIR:=batman-adv-$(PKG_BATMAN_SHORTREV) -PKG_SOURCE_URL:=http://git.open-mesh.org/snapshot/ +PKG_SOURCE_URL:=https://git.open-mesh.org/snapshot/ PKG_SOURCE:=$(PKG_BATMAN_FNAME) PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)/$(PKG_BATMAN_DIR) @@ -24,7 +24,7 @@ include $(INCLUDE_DIR)/package.mk include $(INCLUDE_DIR)/kernel.mk define KernelPackage/batman-adv-devel - URL:=http://www.open-mesh.org/ + URL:=https://www.open-mesh.org/ MAINTAINER:=Marek Lindner <mareklindner(a)neomailbox.ch> SUBMENU:=Network Support DEPENDS:=+KMOD_BATMAN_ADV_DEVEL_BLA:kmod-lib-crc16 +kmod-crypto-core +kmod-crypto-crc32c +kmod-lib-crc32c -- 2.6.2

2 1

[B.A.T.M.A.N.] [PATCH-next] batman-adv: update email address
by Sven Eckelmann 18 Dec '15

18 Dec '15

From: Antonio Quartulli <antonio(a)meshcoding.com> My personal email address has changed. Update it in the doc files Signed-off-by: Antonio Quartulli <antonio(a)meshcoding.com> --- Documentation/ABI/testing/sysfs-class-net-mesh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh index c464062..c2b956d 100644 --- a/Documentation/ABI/testing/sysfs-class-net-mesh +++ b/Documentation/ABI/testing/sysfs-class-net-mesh @@ -8,7 +8,7 @@ Description: What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation Date: May 2011 -Contact: Antonio Quartulli <antonio(a)meshcoding.com> +Contact: Antonio Quartulli <a(a)unstable.cc> Description: Indicates whether the data traffic going from a wireless client to another wireless client will be @@ -70,7 +70,7 @@ Description: What: /sys/class/net/<mesh_iface>/mesh/isolation_mark Date: Nov 2013 -Contact: Antonio Quartulli <antonio(a)meshcoding.com> +Contact: Antonio Quartulli <a(a)unstable.cc> Description: Defines the isolation mark (and its bitmask) which is used to classify clients as "isolated" by the -- 2.6.4

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

B.A.T.M.A.N