--- batman-adv_master.batman_adv.h 2017-10-24 00:05:01.899410088 +0200 +++ batctl_master.batman_adv.h 2017-10-24 00:05:01.983408233 +0200 @@ -24,6 +24,20 @@

/** * enum batadv_tt_client_flags - TT client specific flags + * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table + * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new + * update telling its new real location has not been received/sent yet + * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface. + * This information is used by the "AP Isolation" feature + * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This + * information is used by the Extended Isolation feature + * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table + * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has + * not been announced yet + * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept + * in the table for one more originator interval for consistency purposes + * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of + * the network but no nnode has already announced it * * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire. * Bits from 8 to 15 are called _local flags_ because they are used for local @@ -34,385 +48,160 @@ * in the TT CRC computation. */ enum batadv_tt_client_flags { - /** - * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table - */ BATADV_TT_CLIENT_DEL = (1 << 0), - - /** - * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and - * the new update telling its new real location has not been - * received/sent yet - */ BATADV_TT_CLIENT_ROAM = (1 << 1), - - /** - * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi - * interface. This information is used by the "AP Isolation" feature - */ BATADV_TT_CLIENT_WIFI = (1 << 4), - - /** - * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This - * information is used by the Extended Isolation feature - */ BATADV_TT_CLIENT_ISOLA = (1 << 5), - - /** - * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from - * the table - */ BATADV_TT_CLIENT_NOPURGE = (1 << 8), - - /** - * @BATADV_TT_CLIENT_NEW: this client has been added to the local table - * but has not been announced yet - */ BATADV_TT_CLIENT_NEW = (1 << 9), - - /** - * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it - * is kept in the table for one more originator interval for consistency - * purposes - */ BATADV_TT_CLIENT_PENDING = (1 << 10), - - /** - * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be - * part of the network but no nnode has already announced it - */ BATADV_TT_CLIENT_TEMP = (1 << 11), };

/** * enum batadv_nl_attrs - batman-adv netlink attributes + * + * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors + * @BATADV_ATTR_VERSION: batman-adv version string + * @BATADV_ATTR_ALGO_NAME: name of routing algorithm + * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface + * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface + * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface + * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface + * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface + * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface + * @BATADV_ATTR_ORIG_ADDRESS: originator mac address + * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status) + * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took + * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run + * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session + * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment + * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active + * @BATADV_ATTR_TT_ADDRESS: Client MAC address + * @BATADV_ATTR_TT_TTVN: Translation table version + * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version + * @BATADV_ATTR_TT_CRC32: CRC32 over translation table + * @BATADV_ATTR_TT_VID: VLAN ID + * @BATADV_ATTR_TT_FLAGS: Translation table client flags + * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best + * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen + * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address + * @BATADV_ATTR_TQ: TQ to neighbour + * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour + * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth + * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth + * @BATADV_ATTR_ROUTER: Gateway router MAC address + * @BATADV_ATTR_BLA_OWN: Flag indicating own originator + * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address + * @BATADV_ATTR_BLA_VID: BLA VLAN ID + * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address + * @BATADV_ATTR_BLA_CRC: BLA CRC + * @__BATADV_ATTR_AFTER_LAST: internal use + * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available + * @BATADV_ATTR_MAX: highest attribute number currently defined */ enum batadv_nl_attrs { - /** - * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors - */ BATADV_ATTR_UNSPEC, - - /** - * @BATADV_ATTR_VERSION: batman-adv version string - */ BATADV_ATTR_VERSION, - - /** - * @BATADV_ATTR_ALGO_NAME: name of routing algorithm - */ BATADV_ATTR_ALGO_NAME, - - /** - * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface - */ BATADV_ATTR_MESH_IFINDEX, - - /** - * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface - */ BATADV_ATTR_MESH_IFNAME, - - /** - * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface - */ BATADV_ATTR_MESH_ADDRESS, - - /** - * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface - */ BATADV_ATTR_HARD_IFINDEX, - - /** - * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface - */ BATADV_ATTR_HARD_IFNAME, - - /** - * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv - * interface - */ BATADV_ATTR_HARD_ADDRESS, - - /** - * @BATADV_ATTR_ORIG_ADDRESS: originator mac address - */ BATADV_ATTR_ORIG_ADDRESS, - - /** - * @BATADV_ATTR_TPMETER_RESULT: result of run (see - * batadv_tp_meter_status) - */ BATADV_ATTR_TPMETER_RESULT, - - /** - * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took - */ BATADV_ATTR_TPMETER_TEST_TIME, - - /** - * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run - */ BATADV_ATTR_TPMETER_BYTES, - - /** - * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session - */ BATADV_ATTR_TPMETER_COOKIE, - - /** - * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment - */ BATADV_ATTR_PAD, - - /** - * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active - */ BATADV_ATTR_ACTIVE, - - /** - * @BATADV_ATTR_TT_ADDRESS: Client MAC address - */ BATADV_ATTR_TT_ADDRESS, - - /** - * @BATADV_ATTR_TT_TTVN: Translation table version - */ BATADV_ATTR_TT_TTVN, - - /** - * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version - */ BATADV_ATTR_TT_LAST_TTVN, - - /** - * @BATADV_ATTR_TT_CRC32: CRC32 over translation table - */ BATADV_ATTR_TT_CRC32, - - /** - * @BATADV_ATTR_TT_VID: VLAN ID - */ BATADV_ATTR_TT_VID, - - /** - * @BATADV_ATTR_TT_FLAGS: Translation table client flags - */ BATADV_ATTR_TT_FLAGS, - - /** - * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best - */ BATADV_ATTR_FLAG_BEST, - - /** - * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen - */ BATADV_ATTR_LAST_SEEN_MSECS, - - /** - * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address - */ BATADV_ATTR_NEIGH_ADDRESS, - - /** - * @BATADV_ATTR_TQ: TQ to neighbour - */ BATADV_ATTR_TQ, - - /** - * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour - */ BATADV_ATTR_THROUGHPUT, - - /** - * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth - */ BATADV_ATTR_BANDWIDTH_UP, - - /** - * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth - */ BATADV_ATTR_BANDWIDTH_DOWN, - - /** - * @BATADV_ATTR_ROUTER: Gateway router MAC address - */ BATADV_ATTR_ROUTER, - - /** - * @BATADV_ATTR_BLA_OWN: Flag indicating own originator - */ BATADV_ATTR_BLA_OWN, - - /** - * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address - */ BATADV_ATTR_BLA_ADDRESS, - - /** - * @BATADV_ATTR_BLA_VID: BLA VLAN ID - */ BATADV_ATTR_BLA_VID, - - /** - * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address - */ BATADV_ATTR_BLA_BACKBONE, - - /** - * @BATADV_ATTR_BLA_CRC: BLA CRC - */ BATADV_ATTR_BLA_CRC, - /* add attributes above here, update the policy in netlink.c */ - - /** - * @__BATADV_ATTR_AFTER_LAST: internal use - */ __BATADV_ATTR_AFTER_LAST, - - /** - * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available - */ NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST, - - /** - * @BATADV_ATTR_MAX: highest attribute number currently defined - */ BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1 };

/** * enum batadv_nl_commands - supported batman-adv netlink commands + * + * @BATADV_CMD_UNSPEC: unspecified command to catch errors + * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device + * @BATADV_CMD_TP_METER: Start a tp meter session + * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session + * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. + * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces + * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations + * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations + * @BATADV_CMD_GET_ORIGINATORS: Query list of originators + * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours + * @BATADV_CMD_GET_GATEWAYS: Query list of gateways + * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims + * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones + * @__BATADV_CMD_AFTER_LAST: internal use + * @BATADV_CMD_MAX: highest used command number */ enum batadv_nl_commands { - /** - * @BATADV_CMD_UNSPEC: unspecified command to catch errors - */ BATADV_CMD_UNSPEC, - - /** - * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv - * device - */ BATADV_CMD_GET_MESH_INFO, - - /** - * @BATADV_CMD_TP_METER: Start a tp meter session - */ BATADV_CMD_TP_METER, - - /** - * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session - */ BATADV_CMD_TP_METER_CANCEL, - - /** - * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. - */ BATADV_CMD_GET_ROUTING_ALGOS, - - /** - * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces - */ BATADV_CMD_GET_HARDIFS, - - /** - * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations - */ BATADV_CMD_GET_TRANSTABLE_LOCAL, - - /** - * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations - */ BATADV_CMD_GET_TRANSTABLE_GLOBAL, - - /** - * @BATADV_CMD_GET_ORIGINATORS: Query list of originators - */ BATADV_CMD_GET_ORIGINATORS, - - /** - * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours - */ BATADV_CMD_GET_NEIGHBORS, - - /** - * @BATADV_CMD_GET_GATEWAYS: Query list of gateways - */ BATADV_CMD_GET_GATEWAYS, - - /** - * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims - */ BATADV_CMD_GET_BLA_CLAIM, - - /** - * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance - * backbones - */ BATADV_CMD_GET_BLA_BACKBONE, - /* add new commands above here */ - - /** - * @__BATADV_CMD_AFTER_LAST: internal use - */ __BATADV_CMD_AFTER_LAST, - - /** - * @BATADV_CMD_MAX: highest used command number - */ BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1 };

/** * enum batadv_tp_meter_reason - reason of a tp meter test run stop + * @BATADV_TP_REASON_COMPLETE: sender finished tp run + * @BATADV_TP_REASON_CANCEL: sender was stopped during run + * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't + * answer + * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit + * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already + * ongoing + * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory + * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface + * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions */ enum batadv_tp_meter_reason { - /** - * @BATADV_TP_REASON_COMPLETE: sender finished tp run - */ BATADV_TP_REASON_COMPLETE = 3, - - /** - * @BATADV_TP_REASON_CANCEL: sender was stopped during run - */ BATADV_TP_REASON_CANCEL = 4, - /* error status >= 128 */ - - /** - * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or - * didn't answer - */ BATADV_TP_REASON_DST_UNREACHABLE = 128, - - /** - * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit - */ BATADV_TP_REASON_RESEND_LIMIT = 129, - - /** - * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node - * already ongoing - */ BATADV_TP_REASON_ALREADY_ONGOING = 130, - - /** - * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory - */ BATADV_TP_REASON_MEMORY_ERROR = 131, - - /** - * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface - */ BATADV_TP_REASON_CANT_SEND = 132, - - /** - * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions - */ BATADV_TP_REASON_TOO_MANY = 133, };