The following commit has been merged in the master branch: commit 25985edcedea6396277003854657b5f3cb31a628 Author: Lucas De Marchi lucas.demarchi@profusion.mobi Date: Wed Mar 30 22:57:33 2011 -0300

Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi lucas.demarchi@profusion.mobi

diff --git a/CREDITS b/CREDITS index 1d39a6d..dca6abc 100644 --- a/CREDITS +++ b/CREDITS @@ -1677,7 +1677,7 @@ W: http://www.codemonkey.org.uk D: Assorted VIA x86 support. D: 2.5 AGPGART overhaul. D: CPUFREQ maintenance. -D: Fedora kernel maintainence. +D: Fedora kernel maintenance. D: Misc/Other. S: 314 Littleton Rd, Westford, MA 01886, USA

@@ -3211,7 +3211,7 @@ N: James Simmons E: jsimmons@infradead.org E: jsimmons@users.sf.net D: Frame buffer device maintainer -D: input layer developement +D: input layer development D: tty/console layer D: various mipsel devices S: 115 Carmel Avenue @@ -3290,7 +3290,7 @@ S: USA N: Manfred Spraul E: manfred@colorfullife.com W: http://www.colorfullife.com/~manfred -D: Lots of tiny hacks. Larger improvments to SysV IPC msg, +D: Lots of tiny hacks. Larger improvements to SysV IPC msg, D: slab, pipe, select. S: 71701 Schwieberdingen S: Germany diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css index b585ec2..2979c40 100644 --- a/Documentation/ABI/testing/sysfs-bus-css +++ b/Documentation/ABI/testing/sysfs-bus-css @@ -29,7 +29,7 @@ Contact: Cornelia Huck cornelia.huck@de.ibm.com linux-s390@vger.kernel.org Description: Contains the PIM/PAM/POM values, as reported by the channel subsystem when last queried by the common I/O - layer (this implies that this attribute is not neccessarily + layer (this implies that this attribute is not necessarily in sync with the values current in the channel subsystem). Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led index edff663..3646ec8 100644 --- a/Documentation/ABI/testing/sysfs-class-led +++ b/Documentation/ABI/testing/sysfs-class-led @@ -33,5 +33,5 @@ Contact: Richard Purdie rpurdie@rpsys.net Description: Invert the LED on/off state. This parameter is specific to gpio and backlight triggers. In case of the backlight trigger, - it is usefull when driving a LED which is intended to indicate + it is useful when driving a LED which is intended to indicate a device in a standby like state. diff --git a/Documentation/DocBook/dvb/dvbproperty.xml b/Documentation/DocBook/dvb/dvbproperty.xml index 5f57c7c..97f397e 100644 --- a/Documentation/DocBook/dvb/dvbproperty.xml +++ b/Documentation/DocBook/dvb/dvbproperty.xml @@ -40,7 +40,7 @@

<para>Central frequency of the channel.</para>

- <para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a + <para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of the channel which is 6MHz.</para>

diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml index 78d756d..60c6976 100644 --- a/Documentation/DocBook/dvb/frontend.xml +++ b/Documentation/DocBook/dvb/frontend.xml @@ -139,7 +139,7 @@ consistently to the DiSEqC commands as described in the DiSEqC spec.</para> <section id="frontend_sec_tone"> <title>SEC continuous tone</title>

-<para>The continous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the +<para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to be switched consistently to the DiSEqC commands as described in the DiSEqC spec.</para> diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index f66f4df..67e7ab4 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -1763,7 +1763,7 @@ as it would be on UP. There is a furthur optimization possible here: remember our original cache code, where there were no reference counts and the caller simply held the lock whenever using the object? This is still possible: if -you hold the lock, noone can delete the object, so you don't need to +you hold the lock, no one can delete the object, so you don't need to get and put the reference count. </para>

diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 8c5411c..cdd1bb9 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -1032,7 +1032,7 @@ and other resources, etc. <listitem> <para> This is indicated by ICRC bit in the ERROR register and - means that corruption occurred during data transfer. Upto + means that corruption occurred during data transfer. Up to ATA/ATAPI-7, the standard specifies that this bit is only applicable to UDMA transfers but ATA/ATAPI-8 draft revision 1f says that the bit may be applicable to multiword DMA and @@ -1045,10 +1045,10 @@ and other resources, etc. <term>ABRT error during data transfer or on completion</term> <listitem> <para> - Upto ATA/ATAPI-7, the standard specifies that ABRT could be + Up to ATA/ATAPI-7, the standard specifies that ABRT could be set on ICRC errors and on cases where a device is not able to complete a command. Combined with the fact that MWDMA - and PIO transfer errors aren't allowed to use ICRC bit upto + and PIO transfer errors aren't allowed to use ICRC bit up to ATA/ATAPI-7, it seems to imply that ABRT bit alone could indicate tranfer errors. </para> @@ -1122,7 +1122,7 @@ and other resources, etc. <para> Depending on commands, not all STATUS/ERROR bits are applicable. These non-applicable bits are marked with - &quot;na&quot; in the output descriptions but upto ATA/ATAPI-7 + &quot;na&quot; in the output descriptions but up to ATA/ATAPI-7 no definition of &quot;na&quot; can be found. However, ATA/ATAPI-8 draft revision 1f describes &quot;N/A&quot; as follows. @@ -1507,7 +1507,7 @@ and other resources, etc.

<listitem> <para> - CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used) + CHS set up with INITIALIZE DEVICE PARAMETERS (seldom used) </para> </listitem>

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 620eb3f..6f242d5 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -485,7 +485,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) Reed-Solomon library. </para> <para> - The ECC bytes must be placed immidiately after the data + The ECC bytes must be placed immediately after the data bytes in order to make the syndrome generator work. This is contrary to the usual layout used by software ECC. The separation of data and out of band area is not longer @@ -629,7 +629,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) holds the bad block table. Store a pointer to the pattern in the pattern field. Further the length of the pattern has to be stored in len and the offset in the spare area must be given - in the offs member of the nand_bbt_descr stucture. For mirrored + in the offs member of the nand_bbt_descr structure. For mirrored bad block tables different patterns are mandatory.</para></listitem> <listitem><para>Table creation</para> <para>Set the option NAND_BBT_CREATE to enable the table creation @@ -648,7 +648,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) <listitem><para>Table version control</para> <para>Set the option NAND_BBT_VERSION to enable the table version control. It's highly recommended to enable this for mirrored tables with write - support. It makes sure that the risk of loosing the bad block + support. It makes sure that the risk of losing the bad block table information is reduced to the loss of the information about the one worn out block which should be marked bad. The version is stored in 4 consecutive bytes in the spare area of the device. The position of @@ -1060,19 +1060,19 @@ data in this page</entry> <row> <entry>0x3D</entry> <entry>ECC byte 21</entry> -<entry>Error correction code byte 0 of the eigth 256 Bytes of data +<entry>Error correction code byte 0 of the eighth 256 Bytes of data in this page</entry> </row> <row> <entry>0x3E</entry> <entry>ECC byte 22</entry> -<entry>Error correction code byte 1 of the eigth 256 Bytes of data +<entry>Error correction code byte 1 of the eighth 256 Bytes of data in this page</entry> </row> <row> <entry>0x3F</entry> <entry>ECC byte 23</entry> -<entry>Error correction code byte 2 of the eigth 256 Bytes of data +<entry>Error correction code byte 2 of the eighth 256 Bytes of data in this page</entry> </row> </tbody></tgroup></informaltable> diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl index 53f4f8d..346e552 100644 --- a/Documentation/DocBook/regulator.tmpl +++ b/Documentation/DocBook/regulator.tmpl @@ -267,8 +267,8 @@ <sect1 id="machine-constraint"> <title>Constraints</title> <para> - As well as definining the connections the machine interface - also provides constraints definining the operations that + As well as defining the connections the machine interface + also provides constraints defining the operations that clients are allowed to perform and the parameters that may be set. This is required since generally regulator devices will offer more flexibility than it is safe to use on a given diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index b4665b9..7c4b514d 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -797,7 +797,7 @@ framework to set up sysfs files for this region. Simply leave it alone. perform some initialization. After that, your hardware starts working and will generate an interrupt as soon as it's finished, has some data available, or needs your - attention because an error occured. + attention because an error occurred. </para> <para> <filename>/dev/uioX</filename> is a read-only file. A diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index af29360..8d57c18 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -690,7 +690,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param) </para><para> This request lets kernel drivers talk to user mode code through filesystem operations even when they don't create - a charactor or block special device. + a character or block special device. It's also been used to do things like ask devices what device special file should be used. Two pre-defined ioctls are used diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml index dbab79c..9028721 100644 --- a/Documentation/DocBook/v4l/common.xml +++ b/Documentation/DocBook/v4l/common.xml @@ -100,7 +100,7 @@ linux-kernel@vger.kernel.org, 2002-11-20. --></para>

<para>By convention system administrators create various character device special files with these major and minor numbers in -the <filename>/dev</filename> directory. The names recomended for the +the <filename>/dev</filename> directory. The names recommended for the different V4L2 device types are listed in <xref linkend="devices" />. </para>

diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml index 2fae3e8..a920ee8 100644 --- a/Documentation/DocBook/v4l/controls.xml +++ b/Documentation/DocBook/v4l/controls.xml @@ -1243,7 +1243,7 @@ values are:</entry> </row><row><entry spanname="descr">Mutes the audio when capturing. This is not done by muting audio hardware, which can still produce a slight hiss, but in the encoder itself, guaranteeing a fixed -and reproducable audio bitstream. 0 = unmuted, 1 = muted.</entry> +and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry> </row> <row><entry></entry></row> <row id="v4l2-mpeg-video-encoding"> diff --git a/Documentation/DocBook/v4l/dev-subdev.xml b/Documentation/DocBook/v4l/dev-subdev.xml index 21caff6..05c8fef 100644 --- a/Documentation/DocBook/v4l/dev-subdev.xml +++ b/Documentation/DocBook/v4l/dev-subdev.xml @@ -90,7 +90,7 @@ processing hardware.</para>

<figure id="pipeline-scaling"> - <title>Image Format Negotation on Pipelines</title> + <title>Image Format Negotiation on Pipelines</title> <mediaobject> <imageobject> <imagedata fileref="pipeline.pdf" format="PS" /> diff --git a/Documentation/DocBook/v4l/libv4l.xml b/Documentation/DocBook/v4l/libv4l.xml index c14fc3d..3cb10ec 100644 --- a/Documentation/DocBook/v4l/libv4l.xml +++ b/Documentation/DocBook/v4l/libv4l.xml @@ -140,7 +140,7 @@ and is not locked sets the cid to the scaled value. <para>int v4l2_get_control(int fd, int cid) - This function returns a value of 0 - 65535, scaled to from the actual range of the given v4l control id. when the cid does not exist, could not be -accessed for some reason, or some error occured 0 is returned. +accessed for some reason, or some error occurred 0 is returned. </para></listitem> </itemizedlist> </section> diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml index 3c3b667..160e464 100644 --- a/Documentation/DocBook/v4l/remote_controllers.xml +++ b/Documentation/DocBook/v4l/remote_controllers.xml @@ -133,7 +133,7 @@ different IR's. Due to that, V4L2 API now specifies a standard for mapping Media <row><entry><constant>KEY_LEFT</constant></entry><entry>Left key</entry><entry>LEFT</entry></row> <row><entry><constant>KEY_RIGHT</constant></entry><entry>Right key</entry><entry>RIGHT</entry></row>

-<row><entry><emphasis role="bold">Miscelaneous keys</emphasis></entry></row> +<row><entry><emphasis role="bold">Miscellaneous keys</emphasis></entry></row>

<row><entry><constant>KEY_DOT</constant></entry><entry>Return a dot</entry><entry>.</entry></row> <row><entry><constant>KEY_FN</constant></entry><entry>Select a function</entry><entry>FUNCTION</entry></row> diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index 0ba149d..58ced23 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -4784,7 +4784,7 @@ struct _snd_pcm_runtime { FM registers can be directly accessed through the direct-FM API, defined in <filename>&lt;sound/asound_fm.h&gt;</filename>. In ALSA native mode, FM registers are accessed through - the Hardware-Dependant Device direct-FM extension API, whereas in + the Hardware-Dependent Device direct-FM extension API, whereas in OSS compatible mode, FM registers can be accessed with the OSS direct-FM compatible API in <filename>/dev/dmfmX</filename> device. </para> diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index dcf7acc..3f5e0b0 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -253,8 +253,8 @@ In constrast, MSI is restricted to a maximum of 32 interrupts (and must be a power of two). In addition, the MSI interrupt vectors must be allocated consecutively, so the system may not be able to allocate as many vectors for MSI as it could for MSI-X. On some platforms, MSI -interrupts must all be targetted at the same set of CPUs whereas MSI-X -interrupts can all be targetted at different CPUs. +interrupts must all be targeted at the same set of CPUs whereas MSI-X +interrupts can all be targeted at different CPUs.

4.5.2 Spinlocks

diff --git a/Documentation/SecurityBugs b/Documentation/SecurityBugs index 26c3b36..a660d49 100644 --- a/Documentation/SecurityBugs +++ b/Documentation/SecurityBugs @@ -28,7 +28,7 @@ expect these delays to be short, measurable in days, not weeks or months. A disclosure date is negotiated by the security team working with the bug submitter as well as vendors. However, the kernel security team holds the final say when setting a disclosure date. The timeframe for -disclosure is from immediate (esp. if it's already publically known) +disclosure is from immediate (esp. if it's already publicly known) to a few weeks. As a basic default policy, we expect report date to disclosure date to be on the order of 7 days.

diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers index 38d2aab..319baa8 100644 --- a/Documentation/SubmittingDrivers +++ b/Documentation/SubmittingDrivers @@ -101,7 +101,7 @@ PM support: Since Linux is used on many portable and desktop systems, your complete overview of the power management issues related to drivers see Documentation/power/devices.txt .

-Control: In general if there is active maintainance of a driver by +Control: In general if there is active maintenance of a driver by the author then patches will be redirected to them unless they are totally obvious and without need of checking. If you want to be the contact and update point for the diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 689e237..e439cd0 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -729,7 +729,7 @@ Linus Torvalds's mail on the canonical patch format: http://lkml.org/lkml/2005/4/7/183

Andi Kleen, "On submitting kernel patches" - Some strategies to get difficult or controversal changes in. + Some strategies to get difficult or controversial changes in. http://halobates.de/on-submitting-patches.pdf

-- diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx index 133c5fa..7b9351f 100644 --- a/Documentation/arm/IXP4xx +++ b/Documentation/arm/IXP4xx @@ -36,7 +36,7 @@ Linux currently supports the following features on the IXP4xx chips: - Timers (watchdog, OS)

The following components of the chips are not supported by Linux and -require the use of Intel's propietary CSR softare: +require the use of Intel's proprietary CSR softare:

- USB device interface - Network interfaces (HSS, Utopia, NPEs, etc) @@ -47,7 +47,7 @@ software from:

http://developer.intel.com/design/network/products/npfamily/ixp425.htm

-DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY +DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY SOFTWARE.

There are several websites that provide directions/pointers on using diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt index 7edd0e2..1ca63b3 100644 --- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt @@ -116,7 +116,7 @@ Configuration Allows the entire memory to be checksummed before and after the suspend to see if there has been any corruption of the contents.

- Note, the time to calculate the CRC is dependant on the CPU speed + Note, the time to calculate the CRC is dependent on the CPU speed and the size of memory. For an 64Mbyte RAM area on an 200MHz S3C2410, this can take approximately 4 seconds to complete.

diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt index 05850c6..513f256 100644 --- a/Documentation/arm/Samsung/GPIO.txt +++ b/Documentation/arm/Samsung/GPIO.txt @@ -5,7 +5,7 @@ Introduction ------------

This outlines the Samsung GPIO implementation and the architecture -specfic calls provided alongisde the drivers/gpio core. +specific calls provided alongisde the drivers/gpio core.

S3C24XX (Legacy) diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 2a7b38c..c6d84cf 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -497,7 +497,7 @@ The scatter gather list is in the form of an array of <page, offset, len> entries with their corresponding dma address mappings filled in at the appropriate time. As an optimization, contiguous physical pages can be covered by a single entry where <page> refers to the first page and <len> -covers the range of pages (upto 16 contiguous pages could be covered this +covers the range of pages (up to 16 contiguous pages could be covered this way). There is a helper routine (blk_rq_map_sg) which drivers can use to build the sg list.

@@ -565,7 +565,7 @@ struct request { . int tag; /* command tag associated with request */ void *special; /* same as before */ - char *buffer; /* valid only for low memory buffers upto + char *buffer; /* valid only for low memory buffers up to current_nr_sectors */ . . diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 45d5a21..a20bfd4 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -196,7 +196,7 @@ the state as 0 when a cpu if offline and 1 when its online. #To display the current cpu state. #cat /sys/devices/system/cpu/cpuX/online

-Q: Why cant i remove CPU0 on some systems? +Q: Why can't i remove CPU0 on some systems? A: Some architectures may have some special dependency on a certain CPU.

For e.g in IA64 platforms we have ability to sent platform interrupts to the diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index 1517498..d262e22 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -62,7 +62,7 @@ image file and then arrange all these packets back to back in to one single file. This file is then copied to /sys/class/firmware/dell_rbu/data. Once this file gets to the driver, the driver extracts packet_size data from -the file and spreads it accross the physical memory in contiguous packet_sized +the file and spreads it across the physical memory in contiguous packet_sized space. This method makes sure that all the packets get to the driver in a single operation.

diff --git a/Documentation/device-mapper/dm-service-time.txt b/Documentation/device-mapper/dm-service-time.txt index 7d00668..fb1d4a0 100644 --- a/Documentation/device-mapper/dm-service-time.txt +++ b/Documentation/device-mapper/dm-service-time.txt @@ -37,7 +37,7 @@ Algorithm =========

dm-service-time adds the I/O size to 'in-flight-size' when the I/O is -dispatched and substracts when completed. +dispatched and subtracts when completed. Basically, dm-service-time selects a path having minimum service time which is calculated by:

diff --git a/Documentation/devicetree/bindings/fb/sm501fb.txt b/Documentation/devicetree/bindings/fb/sm501fb.txt index 7d319fb..9d9f009 100644 --- a/Documentation/devicetree/bindings/fb/sm501fb.txt +++ b/Documentation/devicetree/bindings/fb/sm501fb.txt @@ -18,9 +18,9 @@ Optional properties: - edid : verbatim EDID data block describing attached display. Data from the detailed timing descriptor will be used to program the display controller. -- little-endian: availiable on big endian systems, to +- little-endian: available on big endian systems, to set different foreign endian. -- big-endian: availiable on little endian systems, to +- big-endian: available on little endian systems, to set different foreign endian.

Example for MPC5200: diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt index a48b2ca..00f1f54 100644 --- a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt +++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt @@ -15,7 +15,7 @@ Optional properties: - gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins (R/B#). For multi-chip devices, "n" GPIO definitions are required according to the number of chips. -- chip-delay : chip dependent delay for transfering data from array to +- chip-delay : chip dependent delay for transferring data from array to read registers (tR). Required if property "gpios" is not used (R/B# pins not connected).

diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt index d6d209d..c2dbcec 100644 --- a/Documentation/devicetree/bindings/net/can/sja1000.txt +++ b/Documentation/devicetree/bindings/net/can/sja1000.txt @@ -39,7 +39,7 @@ Optional properties:

- nxp,no-comparator-bypass : Allows to disable the CAN input comperator.

-For futher information, please have a look to the SJA1000 data sheet. +For further information, please have a look to the SJA1000 data sheet.

Examples:

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt index 8aa10f4..4f61458 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt @@ -199,7 +199,7 @@ EXAMPLE 4

EXAMPLE 5 /* - * Definition of an error interrupt (interupt type 1). + * Definition of an error interrupt (interrupt type 1). * SoC interrupt number is 16 and the specific error * interrupt bit in the error interrupt summary register * is 23. diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index c8238e4..c4d963a 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -138,7 +138,7 @@ Hotplug is able to load the driver, when it is needed (because you plugged in the device).

If you want to enable debug output, you have to load the driver manually and -from withing the dvb-kernel cvs repository. +from within the dvb-kernel cvs repository.

first have a look, which debug level are available:

diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt index 4a0c2b5..6c3bda5 100644 --- a/Documentation/dvb/ci.txt +++ b/Documentation/dvb/ci.txt @@ -47,7 +47,7 @@ so on.

* CI modules that are supported ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The CI module support is largely dependant upon the firmware on the cards +The CI module support is largely dependent upon the firmware on the cards Some cards do support almost all of the available CI modules. There is nothing much that can be done in order to make additional CI modules working with these cards. diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt index 121832e..97b1373 100644 --- a/Documentation/dvb/faq.txt +++ b/Documentation/dvb/faq.txt @@ -106,7 +106,7 @@ Some very frequently asked questions about linuxtv-dvb 5. The dvb_net device doesn't give me any packets at all

Run tcpdump on the dvb0_0 interface. This sets the interface - into promiscous mode so it accepts any packets from the PID + into promiscuous mode so it accepts any packets from the PID you have configured with the dvbnet utility. Check if there are any packets with the IP addr and MAC addr you have configured with ifconfig. diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 9ee774d..44364fa 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -741,7 +741,7 @@ were done at i7core_edac driver. This chapter will cover those differences As EDAC API maps the minimum unity is csrows, the driver sequencially maps channel/dimm into different csrows.

- For example, suposing the following layout: + For example, supposing the following layout: Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400 diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt index f297fc1..38cf0c7 100644 --- a/Documentation/eisa.txt +++ b/Documentation/eisa.txt @@ -84,7 +84,7 @@ struct eisa_driver {

id_table : an array of NULL terminated EISA id strings, followed by an empty string. Each string can - optionally be paired with a driver-dependant value + optionally be paired with a driver-dependent value (driver_data).

driver : a generic driver, such as described in diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt index 1a2e8aa..444e34b 100644 --- a/Documentation/fb/viafb.txt +++ b/Documentation/fb/viafb.txt @@ -204,7 +204,7 @@ Notes:

supported_output_devices

- This read-only file contains a full ',' seperated list containing all + This read-only file contains a full ',' separated list containing all output devices that could be available on your platform. It is likely that not all of those have a connector on your hardware but it should provide a good starting point to figure out which of those names match @@ -225,7 +225,7 @@ Notes: This can happen for example if only one (the other) iga is used. Writing to these files allows adjusting the output devices during runtime. One can add new devices, remove existing ones or switch - between igas. Essentially you can write a ',' seperated list of device + between igas. Essentially you can write a ',' separated list of device names (or a single one) in the same format as the output to those files. You can add a '+' or '-' as a prefix allowing simple addition and removal of devices. So a prefix '+' adds the devices from your list diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt index 51986bf..4c95935 100644 --- a/Documentation/filesystems/autofs4-mount-control.txt +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -309,7 +309,7 @@ ioctlfd field set to the descriptor obtained from the open call. AUTOFS_DEV_IOCTL_TIMEOUT_CMD ----------------------------

-Set the expire timeout for mounts withing an autofs mount point. +Set the expire timeout for mounts within an autofs mount point.

The call requires an initialized struct autofs_dev_ioctl with the ioctlfd field set to the descriptor obtained from the open call. diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index 1902c57..a167ab8 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -95,7 +95,7 @@ restraints as possible on how an index is structured and where it is placed in the tree. The netfs can even mix indices and data files at the same level, but it's not recommended.

-Each index entry consists of a key of indeterminate length plus some auxilliary +Each index entry consists of a key of indeterminate length plus some auxiliary data, also of indeterminate length.

There are some limits on indices: @@ -203,23 +203,23 @@ This has the following fields:

If the function is absent, a file size of 0 is assumed.

- (6) A function to retrieve auxilliary data from the netfs [optional]. + (6) A function to retrieve auxiliary data from the netfs [optional].

This function will be called with the netfs data that was passed to the - cookie acquisition function and the maximum length of auxilliary data that - it may provide. It should write the auxilliary data into the given buffer + cookie acquisition function and the maximum length of auxiliary data that + it may provide. It should write the auxiliary data into the given buffer and return the quantity it wrote.

- If this function is absent, the auxilliary data length will be set to 0. + If this function is absent, the auxiliary data length will be set to 0.

- The length of the auxilliary data buffer may be dependent on the key + The length of the auxiliary data buffer may be dependent on the key length. A netfs mustn't rely on being able to provide more than 400 bytes for both.

- (7) A function to check the auxilliary data [optional]. + (7) A function to check the auxiliary data [optional].

This function will be called to check that a match found in the cache for - this object is valid. For instance with AFS it could check the auxilliary + this object is valid. For instance with AFS it could check the auxiliary data against the data version number returned by the server to determine whether the index entry in a cache is still valid.

@@ -232,7 +232,7 @@ This has the following fields: (*) FSCACHE_CHECKAUX_NEEDS_UPDATE - the entry requires update (*) FSCACHE_CHECKAUX_OBSOLETE - the entry should be deleted

- This function can also be used to extract data from the auxilliary data in + This function can also be used to extract data from the auxiliary data in the cache and copy it into the netfs's structures.

(8) A pair of functions to manage contexts for the completion callback diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index fabcb0e..dd57bb6 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -409,7 +409,7 @@ As a consequence of this, default_groups cannot be removed directly via rmdir(2). They also are not considered when rmdir(2) on the parent group is checking for children.

-[Dependant Subsystems] +[Dependent Subsystems]

Sometimes other drivers depend on particular configfs items. For example, ocfs2 mounts depend on a heartbeat region item. If that diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 6b05046..c79ec58 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -97,7 +97,7 @@ Note: More extensive information for getting started with ext4 can be * Inode allocation using large virtual block groups via flex_bg * delayed allocation * large block (up to pagesize) support -* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force +* efficient new ordered mode in JBD2 and ext4(avoid using buffer head to force the ordering)

[1] Filesystems with a block size of 1k may see a limit imposed by the @@ -106,7 +106,7 @@ directory hash tree having a maximum depth of two. 2.2 Candidate features for future inclusion

* Online defrag (patches available but not well tested) -* reduced mke2fs time via lazy itable initialization in conjuction with +* reduced mke2fs time via lazy itable initialization in conjunction with the uninit_bg feature (capability to do this is available in e2fsprogs but a kernel thread to do lazy zeroing of unused inode table blocks after filesystem is first mounted is required for safety) diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt index fd966dc..d818896 100644 --- a/Documentation/filesystems/gfs2-uevents.txt +++ b/Documentation/filesystems/gfs2-uevents.txt @@ -62,7 +62,7 @@ be fixed.

The REMOVE uevent is generated at the end of an unsuccessful mount or at the end of a umount of the filesystem. All REMOVE uevents will -have been preceeded by at least an ADD uevent for the same fileystem, +have been preceded by at least an ADD uevent for the same fileystem, and unlike the other uevents is generated automatically by the kernel's kobject subsystem.

diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.txt index 0b59c02..4cda926 100644 --- a/Documentation/filesystems/gfs2.txt +++ b/Documentation/filesystems/gfs2.txt @@ -11,7 +11,7 @@ their I/O so file system consistency is maintained. One of the nifty features of GFS is perfect consistency -- changes made to the file system on one machine show up immediately on all other machines in the cluster.

-GFS uses interchangable inter-node locking mechanisms, the currently +GFS uses interchangeable inter-node locking mechanisms, the currently supported mechanisms are:

lock_nolock -- allows gfs to be used as a local file system diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 933bc66..791af8d 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -350,7 +350,7 @@ Note the "Should sync?" parameter "nosync" means that the two mirrors are already in sync which will be the case on a clean shutdown of Windows. If the mirrors are not clean, you can specify the "sync" option instead of "nosync" and the Device-Mapper driver will then copy the entirety of the "Source Device" -to the "Target Device" or if you specified multipled target devices to all of +to the "Target Device" or if you specified multiple target devices to all of them.

Once you have your table, save it in a file somewhere (e.g. /etc/ntfsvolume1), diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 5393e66..9ed920a 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -80,7 +80,7 @@ user_xattr (*) Enables Extended User Attributes. nouser_xattr Disables Extended User Attributes. acl Enables POSIX Access Control Lists support. noacl (*) Disables POSIX Access Control Lists support. -resv_level=2 (*) Set how agressive allocation reservations will be. +resv_level=2 (*) Set how aggressive allocation reservations will be. Valid values are between 0 (reservations off) to 8 (maximum space for reservations). dir_resv_level= (*) By default, directory reservations will scale with file diff --git a/Documentation/filesystems/path-lookup.txt b/Documentation/filesystems/path-lookup.txt index eb59c8b..3571667 100644 --- a/Documentation/filesystems/path-lookup.txt +++ b/Documentation/filesystems/path-lookup.txt @@ -42,7 +42,7 @@ Path walking overview A name string specifies a start (root directory, cwd, fd-relative) and a sequence of elements (directory entry names), which together refer to a path in the namespace. A path is represented as a (dentry, vfsmount) tuple. The name -elements are sub-strings, seperated by '/'. +elements are sub-strings, separated by '/'.

Name lookups will want to find a particular path that a name string refers to (usually the final element, or parent of final element). This is done by taking @@ -354,7 +354,7 @@ vfstest 24185492 4945 708725(2.9%) 1076136(4.4%) 0 2651

What this shows is that failed rcu-walk lookups, ie. ones that are restarted entirely with ref-walk, are quite rare. Even the "vfstest" case which -specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to excercise +specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to exercise such races is not showing a huge amount of restarts.

Dropping from rcu-walk to ref-walk mean that we have encountered a dentry where diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt index 40ea6c2..65e03dd 100644 --- a/Documentation/filesystems/pohmelfs/network_protocol.txt +++ b/Documentation/filesystems/pohmelfs/network_protocol.txt @@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command so one can extend protocol as needed without breaking backward compatibility as long as old commands are supported. All string lengths include tail 0 byte.

-All commans are transfered over the network in big-endian. CPU endianess is used at the end peers. +All commands are transferred over the network in big-endian. CPU endianess is used at the end peers.

@cmd - command number, which specifies command to be processed. Following commands are used currently: diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 23cae65..b0b814d 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -543,7 +543,7 @@ just those considered 'most important'. The new vectors are: their statistics are used by kernel developers and interested users to determine the occurrence of interrupts of the given type.

-The above IRQ vectors are displayed only when relevent. For example, +The above IRQ vectors are displayed only when relevant. For example, the threshold vector does not exist on x86_64 platforms. Others are suppressed when the system is a uniprocessor. As of this writing, only i386 and x86_64 platforms support the new IRQ vector displays. @@ -1202,7 +1202,7 @@ The columns are: W = can do write operations U = can do unblank flags E = it is enabled - C = it is prefered console + C = it is preferred console B = it is primary boot console p = it is used for printk buffer b = it is not a TTY but a Braille device @@ -1331,7 +1331,7 @@ NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see Documentation/feature-removal-schedule.txt.

Caveat: when a parent task is selected, the oom killer will sacrifice any first -generation children with seperate address spaces instead, if possible. This +generation children with separate address spaces instead, if possible. This avoids servers and important system daemons from being killed and loses the minimal amount of work.

diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt index 2d78f19..d4d4146 100644 --- a/Documentation/filesystems/squashfs.txt +++ b/Documentation/filesystems/squashfs.txt @@ -219,7 +219,7 @@ or if it is stored out of line (in which case the value field stores a reference to where the actual value is stored). This allows large values to be stored out of line improving scanning and lookup performance and it also allows values to be de-duplicated, the value being stored once, and -all other occurences holding an out of line reference to that value. +all other occurrences holding an out of line reference to that value.

The xattr lists are packed into compressed 8K metadata blocks. To reduce overhead in inodes, rather than storing the on-disk diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index f806e50..597f728 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -62,7 +62,7 @@ values of the same type.

Mixing types, expressing multiple lines of data, and doing fancy formatting of data is heavily frowned upon. Doing these things may get -you publically humiliated and your code rewritten without notice. +you publicly humiliated and your code rewritten without notice.

An attribute definition is simply: diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 80815ed..21a7dc4 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -97,7 +97,7 @@ functions: The passed struct file_system_type describes your filesystem. When a request is made to mount a filesystem onto a directory in your namespace, the VFS will call the appropriate mount() method for the specific -filesystem. New vfsmount refering to the tree returned by ->mount() +filesystem. New vfsmount referring to the tree returned by ->mount() will be attached to the mountpoint, so that when pathname resolution reaches the mountpoint it will jump into the root of that vfsmount.

diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt index 5282e3e..2ce3643 100644 --- a/Documentation/filesystems/xfs-delayed-logging-design.txt +++ b/Documentation/filesystems/xfs-delayed-logging-design.txt @@ -42,7 +42,7 @@ the aggregation of all the previous changes currently held only in the log. This relogging technique also allows objects to be moved forward in the log so that an object being relogged does not prevent the tail of the log from ever moving forward. This can be seen in the table above by the changing -(increasing) LSN of each subsquent transaction - the LSN is effectively a +(increasing) LSN of each subsequent transaction - the LSN is effectively a direct encoding of the location in the log of the transaction.

This relogging is also used to implement long-running, multiple-commit @@ -338,7 +338,7 @@ the same time another transaction modifies the item and inserts the log item into the new CIL, then checkpoint transaction commit code cannot use log items to store the list of log vectors that need to be written into the transaction. Hence log vectors need to be able to be chained together to allow them to be -detatched from the log items. That is, when the CIL is flushed the memory +detached from the log items. That is, when the CIL is flushed the memory buffer and log vector attached to each log item needs to be attached to the checkpoint context so that the log item can be released. In diagrammatic form, the CIL would look like this before the flush: @@ -577,7 +577,7 @@ only becomes unpinned when all the transactions complete and there are no pending transactions. Thus the pinning and unpinning of a log item is symmetric as there is a 1:1 relationship with transaction commit and log item completion.

-For delayed logging, however, we have an assymetric transaction commit to +For delayed logging, however, we have an asymmetric transaction commit to completion relationship. Every time an object is relogged in the CIL it goes through the commit process without a corresponding completion being registered. That is, we now have a many-to-one relationship between transaction commit and @@ -780,7 +780,7 @@ With delayed logging, there are new steps inserted into the life cycle: From this, it can be seen that the only life cycle differences between the two logging methods are in the middle of the life cycle - they still have the same beginning and end and execution constraints. The only differences are in the -commiting of the log items to the log itself and the completion processing. +committing of the log items to the log itself and the completion processing. Hence delayed logging should not introduce any constraints on log item behaviour, allocation or freeing that don't already exist.

diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index 5eb3b9d..915f320 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -78,7 +78,7 @@ motherboards (most modern Abit motherboards).

The first and second revision of the uGuru chip in reality is a Winbond W83L950D in disguise (despite Abit claiming it is "a new microprocessor -designed by the ABIT Engineers"). Unfortunatly this doesn't help since the +designed by the ABIT Engineers"). Unfortunately this doesn't help since the W83L950D is a generic microcontroller with a custom Abit application running on it.

diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index d9251ef..8d2be8a 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -5,9 +5,9 @@ First of all, what I know about uGuru is no fact based on any help, hints or datasheet from Abit. The data I have got on uGuru have I assembled through my weak knowledge in "backwards engineering". And just for the record, you may have noticed uGuru isn't a chip developed by -Abit, as they claim it to be. It's realy just an microprocessor (uC) created by +Abit, as they claim it to be. It's really just an microprocessor (uC) created by Winbond (W83L950D). And no, reading the manual for this specific uC or -mailing Windbond for help won't give any usefull data about uGuru, as it is +mailing Windbond for help won't give any useful data about uGuru, as it is the program inside the uC that is responding to calls.

Olle Sandberg ollebull@gmail.com, 2005-05-25 @@ -41,7 +41,7 @@ later on attached again data-port will hold 0x08, more about this later.

After wider testing of the Linux kernel driver some variants of the uGuru have turned up which will hold 0x00 instead of 0xAC at the CMD port, thus we also -have to test CMD for two different values. On these uGuru's DATA will initally +have to test CMD for two different values. On these uGuru's DATA will initially hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read first!

@@ -308,5 +308,5 @@ the voltage / clock programming out, I tried reading and only reading banks resulted in a _permanent_ reprogramming of the voltages, luckily I had the sensors part configured so that it would shutdown my system on any out of spec voltages which proprably safed my computer (after a reboot I managed to -immediatly enter the bios and reload the defaults). This probably means that +immediately enter the bios and reload the defaults). This probably means that the read/write cycle for the non sensor part is different from the sensor part. diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3 index fa598aa..a6ccfe4 100644 --- a/Documentation/hwmon/abituguru3 +++ b/Documentation/hwmon/abituguru3 @@ -47,7 +47,7 @@ This driver supports the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit uGuru featuring motherboards.

The 3rd revision of the uGuru chip in reality is a Winbond W83L951G. -Unfortunatly this doesn't help since the W83L951G is a generic microcontroller +Unfortunately this doesn't help since the W83L951G is a generic microcontroller with a custom Abit application running on it.

Despite Abit not releasing any information regarding the uGuru revision 3, diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index f2d42e8..dc4933e 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -150,11 +150,11 @@ The following attributes are supported. Limits are read-write; all other attributes are read-only.

inX_input Measured voltage. From READ_VIN or READ_VOUT register. -inX_min Minumum Voltage. +inX_min Minimum Voltage. From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register. inX_max Maximum voltage. From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register. -inX_lcrit Critical minumum Voltage. +inX_lcrit Critical minimum Voltage. From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register. inX_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register. @@ -169,7 +169,7 @@ inX_label "vin", "vcap", or "voutY" currX_input Measured current. From READ_IIN or READ_IOUT register. currX_max Maximum current. From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register. -currX_lcrit Critical minumum output current. +currX_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. currX_crit Critical maximum current. From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 83a6987..8f63c24 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -579,7 +579,7 @@ channel should not be trusted. fan[1-*]_fault temp[1-*]_fault Input fault condition - 0: no fault occured + 0: no fault occurred 1: fault condition RO

diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index ecbc1e4..129b0a3 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -403,7 +403,7 @@ found out the following values do work as a form of coarse pwm:

0x80 - seems to turn fans off after some time(1-2 minutes)... might be some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an -old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attemp at Qfan +old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan that was dropped at the BIOS) 0x81 - off 0x82 - slightly "on-ner" than off, but my fans do not get to move. I can diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index 5663e49..90387c3 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -93,7 +93,7 @@ The sysfs interface to the beep bitmask has migrated from the original legacy method of a single sysfs beep_mask file to a newer method using multiple *_beep files as described in .../Documentation/hwmon/sysfs-interface.

-A similar change has occured for the bitmap corresponding to the alarms. The +A similar change has occurred for the bitmap corresponding to the alarms. The original legacy method used a single sysfs alarms file containing a bitmap of triggered alarms. The newer method uses multiple sysfs *_alarm files (again following the pattern described in sysfs-interface). diff --git a/Documentation/i2c/busses/i2c-parport-light b/Documentation/i2c/busses/i2c-parport-light index bdc9cbb..c22ee06 100644 --- a/Documentation/i2c/busses/i2c-parport-light +++ b/Documentation/i2c/busses/i2c-parport-light @@ -4,7 +4,7 @@ Author: Jean Delvare khali@linux-fr.org

This driver is a light version of i2c-parport. It doesn't depend on the parport driver, and uses direct I/O access instead. This might be -prefered on embedded systems where wasting memory for the clean but heavy +preferred on embedded systems where wasting memory for the clean but heavy parport handling is not an option. The drawback is a reduced portability and the impossibility to daisy-chain other parallel port devices.

diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x index 70e6a0c..0b979f3 100644 --- a/Documentation/i2c/busses/i2c-sis96x +++ b/Documentation/i2c/busses/i2c-sis96x @@ -35,7 +35,7 @@ or perhaps this...

(kernel versions later than 2.4.18 may fill in the "Unknown"s)

-If you cant see it please look on quirk_sis_96x_smbus +If you can't see it please look on quirk_sis_96x_smbus (drivers/pci/quirks.c) (also if southbridge detection fails)

I suspect that this driver could be made to work for the following SiS diff --git a/Documentation/i2c/busses/i2c-taos-evm b/Documentation/i2c/busses/i2c-taos-evm index 9146e33..63f62bc 100644 --- a/Documentation/i2c/busses/i2c-taos-evm +++ b/Documentation/i2c/busses/i2c-taos-evm @@ -13,7 +13,7 @@ Currently supported devices are:

* TAOS TSL2550 EVM

-For addtional information on TAOS products, please see +For additional information on TAOS products, please see http://www.taosinc.com/

diff --git a/Documentation/i2o/README b/Documentation/i2o/README index 0ebf58c..ee91e26 100644 --- a/Documentation/i2o/README +++ b/Documentation/i2o/README @@ -53,7 +53,7 @@ Symbios Logic (Now LSI) BoxHill Corporation Loan of initial FibreChannel disk array used for development work.

-European Comission +European Commission Funding the work done by the University of Helsinki

SysKonnect diff --git a/Documentation/ia64/aliasing-test.c b/Documentation/ia64/aliasing-test.c index 3dfb76c..5caa2af 100644 --- a/Documentation/ia64/aliasing-test.c +++ b/Documentation/ia64/aliasing-test.c @@ -177,7 +177,7 @@ static int scan_rom(char *path, char *file)

/* * It's OK if the ROM is unreadable. Maybe there - * is no ROM, or some other error ocurred. The + * is no ROM, or some other error occurred. The * important thing is that no MCA happened. */ if (rc > 0) diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt index 1c856f3..56870c7 100644 --- a/Documentation/input/joystick-parport.txt +++ b/Documentation/input/joystick-parport.txt @@ -272,7 +272,7 @@ if you want to use gamecon.c.

Also, the connection is a bit more complex. You'll need a bunch of diodes, and one pullup resistor. First, you connect the Directions and the button -the same as for db9, however with the diodes inbetween. +the same as for db9, however with the diodes between.

Diodes (pin 2) -----|<|----> Up diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt index 8b4129d..943e8f6 100644 --- a/Documentation/input/rotary-encoder.txt +++ b/Documentation/input/rotary-encoder.txt @@ -46,7 +46,7 @@ c) Falling edge on channel A, channel B in high state

d) Falling edge on channel B, channel A in low state Parking position. If the encoder enters this state, a full transition - should have happend, unless it flipped back on half the way. The + should have happened, unless it flipped back on half the way. The 'armed' state tells us about that.

2. Platform requirements diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/walkera0701.txt index 8f4289e..561385d 100644 --- a/Documentation/input/walkera0701.txt +++ b/Documentation/input/walkera0701.txt @@ -77,7 +77,7 @@ pulse length:

24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits

-(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync +(Warning, pulses on ACK are inverted by transistor, irq is raised up on sync to bin change or octal value to bin change).

Binary data representations: diff --git a/Documentation/irqflags-tracing.txt b/Documentation/irqflags-tracing.txt index 6a44487..67aa71e 100644 --- a/Documentation/irqflags-tracing.txt +++ b/Documentation/irqflags-tracing.txt @@ -53,5 +53,5 @@ implementation in an architecture: lockdep will detect that and will turn itself off. I.e. the lock validator will still be reliable. There should be no crashes due to irq-tracing bugs. (except if the assembly changes break other code by modifying conditions or registers that -shouldnt be) +shouldn't be)

diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 309eb5e..1688b5a 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -240,7 +240,7 @@ Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert messages between their transport encoding described in the CAPI 2.0 standard and their _cmsg structure representation. Note that capi_cmsg2message() does not know or check the size of its destination buffer. The caller must make -sure it is big enough to accomodate the resulting CAPI message. +sure it is big enough to accommodate the resulting CAPI message.

5. Lower Layer Interface Functions diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index f1431d0..7c2a89b 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -26,11 +26,11 @@ Additional options to the assembler (for built-in and modules).

AFLAGS_MODULE -------------------------------------------------- -Addtional module specific options to use for $(AS). +Additional module specific options to use for $(AS).

AFLAGS_KERNEL -------------------------------------------------- -Addtional options for $(AS) when used for assembler +Additional options for $(AS) when used for assembler code for code that is compiled as built-in.

KCFLAGS @@ -39,12 +39,12 @@ Additional options to the C compiler (for built-in and modules).

CFLAGS_KERNEL -------------------------------------------------- -Addtional options for $(CC) when used to compile +Additional options for $(CC) when used to compile code that is compiled as built-in.

CFLAGS_MODULE -------------------------------------------------- -Addtional module specific options to use for $(CC). +Additional module specific options to use for $(CC).

LDFLAGS_MODULE -------------------------------------------------- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c357a31..49e9796 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -699,7 +699,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ekgdboc= [X86,KGDB] Allow early kernel console debugging ekgdboc=kbd

- This is desgined to be used in conjunction with + This is designed to be used in conjunction with the boot argument: earlyprintk=vga

edd= [EDD] diff --git a/Documentation/kvm/mmu.txt b/Documentation/kvm/mmu.txt index 142cc51..f46aa58 100644 --- a/Documentation/kvm/mmu.txt +++ b/Documentation/kvm/mmu.txt @@ -23,7 +23,7 @@ The mmu code attempts to satisfy the following requirements: and framebuffer-based displays - footprint: keep the amount of pinned kernel memory low (most memory should be shrinkable) -- reliablity: avoid multipage or GFP_ATOMIC allocations +- reliability: avoid multipage or GFP_ATOMIC allocations

Acronyms ======== diff --git a/Documentation/kvm/ppc-pv.txt b/Documentation/kvm/ppc-pv.txt index a7f2244..3ab969c 100644 --- a/Documentation/kvm/ppc-pv.txt +++ b/Documentation/kvm/ppc-pv.txt @@ -136,7 +136,7 @@ Patched instructions ====================

The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions -respectively on 32 bit systems with an added offset of 4 to accomodate for big +respectively on 32 bit systems with an added offset of 4 to accommodate for big endianness.

The following is a list of mapping the Linux kernel performs when running as diff --git a/Documentation/kvm/timekeeping.txt b/Documentation/kvm/timekeeping.txt index 0c5033a..df89463 100644 --- a/Documentation/kvm/timekeeping.txt +++ b/Documentation/kvm/timekeeping.txt @@ -81,7 +81,7 @@ Mode 0: Single Timeout. This is a one-shot software timeout that counts down when the gate is high (always true for timers 0 and 1). When the count reaches zero, the output goes high.

-Mode 1: Triggered One-shot. The output is intially set high. When the gate +Mode 1: Triggered One-shot. The output is initially set high. When the gate line is set high, a countdown is initiated (which does not stop if the gate is lowered), during which the output is set low. When the count reaches zero, the output goes high. diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index fd48add..76a2087 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -194,7 +194,7 @@ each pad.

Links are represented by a struct media_link instance, defined in include/media/media-entity.h. Each entity stores all links originating at or -targetting any of its pads in a links array. A given link is thus stored +targeting any of its pads in a links array. A given link is thus stored twice, once in the source entity and once in the target entity. The array is pre-allocated and grows dynamically as needed.

@@ -348,6 +348,6 @@ a streaming entity. Links that can be modified while streaming must be marked with the MEDIA_LNK_FL_DYNAMIC flag.

If other operations need to be disallowed on streaming entities (such as -changing entities configuration parameters) drivers can explictly check the +changing entities configuration parameters) drivers can explicitly check the media_entity stream_count field to find out if an entity is streaming. This operation must be done with the media_device graph_mutex held. diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index 8ace35e..cc887ec 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README @@ -39,13 +39,13 @@ Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE Interface and Linux Device Driver" Application Note.

-FILES, CONFIGS AND COMPATABILITY +FILES, CONFIGS AND COMPATIBILITY --------------------------------

Two files are introduced:

a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h' - containes : struct _auide_hwif + contains : struct _auide_hwif timing parameters for PIO mode 0/1/2/3/4 timing parameters for MWDMA 0/1/2

diff --git a/Documentation/misc-devices/ics932s401 b/Documentation/misc-devices/ics932s401 index 07a739f..bdac67f 100644 --- a/Documentation/misc-devices/ics932s401 +++ b/Documentation/misc-devices/ics932s401 @@ -5,7 +5,7 @@ Supported chips: * IDT ICS932S401 Prefix: 'ics932s401' Addresses scanned: I2C 0x69 - Datasheet: Publically available at the IDT website + Datasheet: Publicly available at the IDT website

Author: Darrick J. Wong

diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt index 4af8071..dadfe81 100644 --- a/Documentation/networking/3c359.txt +++ b/Documentation/networking/3c359.txt @@ -45,7 +45,7 @@ debugging messages on, that must be done by modified the source code.

Variable MTU size:

-The driver can handle a MTU size upto either 4500 or 18000 depending upon +The driver can handle a MTU size up to either 4500 or 18000 depending upon ring speed. The driver also changes the size of the receive buffers as part of the mtu re-sizing, so if you set mtu = 18000, you will need to be able to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200 index 616a8e5..b7658be 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/README.ipw2200 @@ -256,7 +256,7 @@ You can set the debug level via:

Where $VALUE would be a number in the case of this sysfs entry. The input to sysfs files does not have to be a number. For example, the -firmware loader used by hotplug utilizes sysfs entries for transfering +firmware loader used by hotplug utilizes sysfs entries for transferring the firmware image from user space into the driver.

The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index b36e741..e27202b 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -368,7 +368,7 @@ fail_over_mac gratuitous ARP is lost, communication may be disrupted.

- When this policy is used in conjuction with the mii + When this policy is used in conjunction with the mii monitor, devices which assert link up prior to being able to actually transmit and receive are particularly susceptible to loss of the gratuitous ARP, and an diff --git a/Documentation/networking/caif/Linux-CAIF.txt b/Documentation/networking/caif/Linux-CAIF.txt index 7fe7a9a..e52fd62 100644 --- a/Documentation/networking/caif/Linux-CAIF.txt +++ b/Documentation/networking/caif/Linux-CAIF.txt @@ -136,7 +136,7 @@ The CAIF Protocol implementation contains: - CFMUX CAIF Mux layer. Handles multiplexing between multiple physical bearers and multiple channels such as VEI, Datagram, etc. The MUX keeps track of the existing CAIF Channels and - Physical Instances and selects the apropriate instance based + Physical Instances and selects the appropriate instance based on Channel-Id and Physical-ID.

- CFFRML CAIF Framing layer. Handles Framing i.e. Frame length diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt index 0cb8cb9..9efd068 100644 --- a/Documentation/networking/caif/spi_porting.txt +++ b/Documentation/networking/caif/spi_porting.txt @@ -150,7 +150,7 @@ static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev) void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev) { /* If xfer is true then you should assert the SPI_INT to indicate to - * the master that you are ready to recieve the data from the master + * the master that you are ready to receive the data from the master * SPI. If xfer is false then you should de-assert SPI_INT to indicate * that the transfer is done. */ diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 5b04b67..56ca3b7 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -240,7 +240,7 @@ solution for a couple of reasons: the user application using the common CAN filter mechanisms. Inside this filter definition the (interested) type of errors may be selected. The reception of error frames is disabled by default. - The format of the CAN error frame is briefly decribed in the Linux + The format of the CAN error frame is briefly described in the Linux header file "include/linux/can/error.h".

4. How to use Socket CAN diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index 23c995e..f41ea24 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -9,7 +9,7 @@ The Linux-ZigBee project goal is to provide complete implementation of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack of protocols for organizing Low-Rate Wireless Personal Area Networks.

-Currently only IEEE 802.15.4 layer is implemented. We have choosen +Currently only IEEE 802.15.4 layer is implemented. We have chosen to use plain Berkeley socket API, the generic Linux networking stack to transfer IEEE 802.15.4 messages and a special protocol over genetlink for configuration/management diff --git a/Documentation/networking/olympic.txt b/Documentation/networking/olympic.txt index c65a940..b95b5bf 100644 --- a/Documentation/networking/olympic.txt +++ b/Documentation/networking/olympic.txt @@ -65,7 +65,7 @@ together.

Variable MTU size:

-The driver can handle a MTU size upto either 4500 or 18000 depending upon +The driver can handle a MTU size up to either 4500 or 18000 depending upon ring speed. The driver also changes the size of the receive buffers as part of the mtu re-sizing, so if you set mtu = 18000, you will need to be able to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 073894d..4acea66 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -223,7 +223,7 @@ we will get the following buffer structure:

A frame can be of any size with the only condition it can fit in a block. A block can only hold an integer number of frames, or in other words, a frame cannot -be spawned accross two blocks, so there are some details you have to take into +be spawned across two blocks, so there are some details you have to take into account when choosing the frame_size. See "Mapping and use of the circular buffer (ring)".

diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index 9d4e0f4..4be0c03 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -37,7 +37,7 @@ To associate an interface with a physical adapter use "ethtool -p <ethX>". The corresponding adapter's LED will blink multiple times.

3. Features supported: -a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes, +a. Jumbo frames. Xframe I/II supports MTU up to 9600 bytes, modifiable using ifconfig command.

b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit @@ -49,7 +49,7 @@ significant performance improvement on certain platforms(SGI Altix, IBM xSeries).

d. MSI/MSI-X. Can be enabled on platforms which support this feature -(IA64, Xeon) resulting in noticeable performance improvement(upto 7% +(IA64, Xeon) resulting in noticeable performance improvement(up to 7% on certain platforms).

e. Statistics. Comprehensive MAC-level and software statistics displayed diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt index dcadf6f..70d6cf6 100644 --- a/Documentation/networking/tc-actions-env-rules.txt +++ b/Documentation/networking/tc-actions-env-rules.txt @@ -1,5 +1,5 @@

-The "enviromental" rules for authors of any new tc actions are: +The "environmental" rules for authors of any new tc actions are:

1) If you stealeth or borroweth any packet thou shalt be branching from the righteous path and thou shalt cloneth. @@ -20,7 +20,7 @@ this way any action downstream can stomp on the packet. 3) Dropping packets you don't own is a no-no. You simply return TC_ACT_SHOT to the caller and they will drop it.

-The "enviromental" rules for callers of actions (qdiscs etc) are: +The "environmental" rules for callers of actions (qdiscs etc) are:

*) Thou art responsible for freeing anything returned as being TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index f023ba6..1971bcf 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -367,7 +367,7 @@ Drivers need to be able to handle hardware which has been reset since the suspend methods were called, for example by complete reinitialization. This may be the hardest part, and the one most protected by NDA'd documents and chip errata. It's simplest if the hardware state hasn't changed since -the suspend was carried out, but that can't be guaranteed (in fact, it ususally +the suspend was carried out, but that can't be guaranteed (in fact, it usually is not the case).

Drivers must also be prepared to notice that the device has been removed diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt index ae1b7ec..cf98070 100644 --- a/Documentation/power/notifiers.txt +++ b/Documentation/power/notifiers.txt @@ -24,7 +24,7 @@ PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will be frozen immediately.

PM_POST_HIBERNATION The system memory state has been restored from a - hibernation image or an error occured during the + hibernation image or an error occurred during the hibernation. Device drivers' .resume() callbacks have been executed and tasks have been thawed.

@@ -38,7 +38,7 @@ PM_POST_RESTORE An error occurred during the hibernation restore.

PM_SUSPEND_PREPARE The system is preparing for a suspend.

-PM_POST_SUSPEND The system has just resumed or an error occured during +PM_POST_SUSPEND The system has just resumed or an error occurred during the suspend. Device drivers' .resume() callbacks have been executed and tasks have been thawed.

diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt index cd44558..5ae70a12 100644 --- a/Documentation/power/opp.txt +++ b/Documentation/power/opp.txt @@ -178,7 +178,7 @@ opp_find_freq_ceil - Search for an available OPP which is *at least* the if (!IS_ERR(opp)) soc_switch_to_freq_voltage(freq); else - /* do something when we cant satisfy the req */ + /* do something when we can't satisfy the req */ /* do other stuff */ }

diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index ea71889..ac190cf 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -192,7 +192,7 @@ Q: There don't seem to be any generally useful behavioral distinctions between SUSPEND and FREEZE.

A: Doing SUSPEND when you are asked to do FREEZE is always correct, -but it may be unneccessarily slow. If you want your driver to stay simple, +but it may be unnecessarily slow. If you want your driver to stay simple, slowness may not matter to you. It can always be fixed later.

For devices like disk it does matter, you do not want to spindown for @@ -237,7 +237,7 @@ disk. Whole sequence goes like

running system, user asks for suspend-to-disk

- user processes are stopped (in common case there are none, but with resume-from-initrd, noone knows) + user processes are stopped (in common case there are none, but with resume-from-initrd, no one knows)

read image from disk

diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index 81680f9..1101bee 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -98,7 +98,7 @@ SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to The device's read() operation can be used to transfer the snapshot image from the kernel. It has the following limitations: - you cannot read() more than one virtual memory page at a time -- read()s accross page boundaries are impossible (ie. if ypu read() 1/2 of +- read()s across page boundaries are impossible (ie. if ypu read() 1/2 of a page in the previous call, you will only be able to read() _at_ _most_ 1/2 of the page in the next call)

@@ -137,7 +137,7 @@ mechanism and the userland utilities using the interface SHOULD use additional means, such as checksums, to ensure the integrity of the snapshot image.

The suspending and resuming utilities MUST lock themselves in memory, -preferrably using mlockall(), before calling SNAPSHOT_FREEZE. +preferably using mlockall(), before calling SNAPSHOT_FREEZE.

The suspending utility MUST check the value stored by SNAPSHOT_CREATE_IMAGE in the memory location pointed to by the last argument of ioctl() and proceed @@ -147,7 +147,7 @@ in accordance with it: (a) The suspending utility MUST NOT close the snapshot device _unless_ the whole suspend procedure is to be cancelled, in which case, if the snapshot image has already been saved, the - suspending utility SHOULD destroy it, preferrably by zapping + suspending utility SHOULD destroy it, preferably by zapping its header. If the suspend is not to be cancelled, the system MUST be powered off or rebooted after the snapshot image has been saved. diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt index 6d8be34..a730ca5 100644 --- a/Documentation/powerpc/hvcs.txt +++ b/Documentation/powerpc/hvcs.txt @@ -528,7 +528,7 @@ this driver assignment of hotplug added vty-servers may be in a different order than how they would be exposed on module load. Rebooting or reloading the module after dynamic addition may result in the /dev/hvcs* and vty-server coupling changing if a vty-server adapter was added in a -slot inbetween two other vty-server adapters. Refer to the section above +slot between two other vty-server adapters. Refer to the section above on how to determine which vty-server goes with which /dev/hvcs* node. Hint; look at the sysfs "index" attribute for the vty-server.

diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index 5e83769..c56ec99 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -352,7 +352,7 @@ Changes from 20041229 to 20050110 lpfc_scsiport.c * In remote port changes: no longer nulling target->pnode when removing from mapped list. Pnode get nulled when the node is - freed (after nodev tmo). This bug was causing i/o recieved in + freed (after nodev tmo). This bug was causing i/o received in the small window while the device was blocked to be errored w/ did_no_connect. With the fix, it returns host_busy (per the pre-remote port changes). @@ -530,7 +530,7 @@ Changes from 20041018 to 20041123 coherent mappings. Note: There are more consistent mappings that are using pci_dma_sync calls. Probably these should be removed as well. - * Modified lpfc_free_scsi_buf to accomodate all three scsi_buf + * Modified lpfc_free_scsi_buf to accommodate all three scsi_buf free types to alleviate miscellaneous panics with cable pull testing. * Set hotplug to default 0 and lpfc_target_remove to not remove @@ -583,7 +583,7 @@ Changes from 20041018 to 20041123 included more than once. * Replaced "set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(timeout)" with "msleep(timeout)". - * Fixnode was loosing starget when rediscovered. We saw messages + * Fixnode was losing starget when rediscovered. We saw messages like: lpfc 0000:04:02.0: 0:0263 Cannot block scsi target as a result. Moved starget field into struct lpfc_target which is referenced from the node. @@ -604,7 +604,7 @@ Changes from 20041018 to 20041123 * Make 3 functions static: lpfc_get_hba_sym_node_name, lpfc_intr_prep and lpfc_setup_slim_access. Move lpfc_intr_prep and lpfc_setup_slim_access so they're defined before being used. - * Remove an unecessary list_del() in lpfc_hbadisc.c. + * Remove an unnecessary list_del() in lpfc_hbadisc.c. * Set nlp_state before calling lpfc_nlp_list() since this will potentially call fc_target_unblock which may cause a race in queuecommand by releasing host_lock. @@ -753,7 +753,7 @@ Changes from 20040908 to 20040920 * Changed version number to 8.0.12 * Removed used #defines: DEFAULT_PCI_LATENCY_CLOCKS and PCI_LATENCY_VALUE from lpfc_hw.h. - * Changes to accomodate rnid. + * Changes to accommodate rnid. * Fix RSCN handling so RSCN NS queries only effect NPorts found in RSCN data. * If we rcv a plogi on a NPort queued up for discovery, clear the @@ -813,7 +813,7 @@ Changes from 20040908 to 20040920 counter instead, brd_no isn't reused anymore. Also some tiny whitespace cleanups in surrounding code. * Reorder functions in lpfc_els.c to remove need for prototypes. - * Removed unsed prototypes from lpfc_crtn.h - + * Removed unused prototypes from lpfc_crtn.h - lpfc_ip_timeout_handler, lpfc_read_pci and lpfc_revoke. * Removed some unused prototypes from lpfc_crtn.h - lpfc_scsi_hba_reset, lpfc_scsi_issue_inqsn, @@ -863,7 +863,7 @@ Changes from 20040823 to 20040908 * Minimal support for SCSI flat space addressing/volume set addressing. Use 16 bits of LUN address so that flat addressing/VSA will work. - * Changed 2 occurences of if( 1 != f(x)) to if(f(x) != 1) + * Changed 2 occurrences of if( 1 != f(x)) to if(f(x) != 1) * Drop include of lpfc_cfgparm.h. * Reduce stack usage of lpfc_fdmi_cmd in lpfc_ct.c. * Add minimum range checking property to /sys write/store @@ -1449,7 +1449,7 @@ Changes from 20040402 to 20040409 * Removed lpfc_els_chk_latt from the lpfc_config_post function. lpfc_els_chk_latt will enable the link event interrupts when flogi is pending which causes two discovery state machines - running parallely. + running parallelly. * Add pci_disable_device to unload path. * Move lpfc_sleep_event from lpfc_fcp.c to lpfc_util_ioctl.c * Call dma_map_single() & pci_map_single() directly instead of via @@ -1590,7 +1590,7 @@ Changes from 20040326 to 20040402 ELX_WRITE_HS ELX_WRITE_HA ELX_WRITE_CA ELX_READ_HC ELX_READ_HS ELX_READ_HA ELX_READ_CA ELX_READ_MB ELX_RESET ELX_READ_HBA ELX_INSTANCE ELX_LIP. Also introduced - attribute "set" to be used in conjuction with the above + attribute "set" to be used in conjunction with the above attributes. * Removed DLINK, enque and deque declarations now that clock doesn't use them anymore diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index 5e07d32..d2052fd 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -168,7 +168,7 @@ Older Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)

1. Sorted out PCI IDs to remove megaraid support overlaps. Based on the patch from Daniel, sorted out PCI IDs along with - charactor node name change from 'megadev' to 'megadev_legacy' to avoid + character node name change from 'megadev' to 'megadev_legacy' to avoid conflict. --- Hopefully we'll be getting the build restriction zapped much sooner, diff --git a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx index 8b278c1..9288e3d 100644 --- a/Documentation/scsi/ChangeLog.ncr53c8xx +++ b/Documentation/scsi/ChangeLog.ncr53c8xx @@ -200,7 +200,7 @@ Sun Feb 14:00 1999 Gerard Roudier (groudier@club-internet.fr) By default the driver uses both IRQF_SHARED and IRQF_DISABLED. Option 'ncr53c8xx=irqm:0x20' may be used when an IRQ is shared by a 53C8XX adapter and a network board. - - Tiny mispelling fixed (ABORT instead of ABRT). Was fortunately + - Tiny misspelling fixed (ABORT instead of ABRT). Was fortunately harmless. - Negotiate SYNC data transfers with CCS devices.

diff --git a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx index 02ffbc1..c193370 100644 --- a/Documentation/scsi/ChangeLog.sym53c8xx +++ b/Documentation/scsi/ChangeLog.sym53c8xx @@ -457,7 +457,7 @@ Fri Jan 1 20:00 1999 Gerard Roudier (groudier@club-internet.fr) Sat Dec 19 21:00 1998 Gerard Roudier (groudier@club-internet.fr) * version sym53c8xx-1.0 - Define some new IO registers for the 896 (istat1, mbox0, mbox1) - - Revamp slighly the Symbios NVRAM lay-out based on the excerpt of + - Revamp slightly the Symbios NVRAM lay-out based on the excerpt of the header file I received from Symbios. - Check the PCI bus number for the boot order (Using a fast PCI controller behing a PCI-PCI bridge seems sub-optimal). diff --git a/Documentation/scsi/aha152x.txt b/Documentation/scsi/aha152x.txt index 29ce6d8..9484873 100644 --- a/Documentation/scsi/aha152x.txt +++ b/Documentation/scsi/aha152x.txt @@ -124,7 +124,7 @@ in the partition table and therefore every operating system has to know the right geometry to be able to interpret it.

Moreover there are certain limitations to the C/H/S addressing scheme, -namely the address space is limited to upto 255 heads, upto 63 sectors +namely the address space is limited to up to 255 heads, up to 63 sectors and a maximum of 1023 cylinders.

The AHA-1522 BIOS calculates the geometry by fixing the number of heads diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt index 16e054c..64ac709 100644 --- a/Documentation/scsi/aic79xx.txt +++ b/Documentation/scsi/aic79xx.txt @@ -267,7 +267,7 @@ The following information is available in this file: Option: tag_info:{{value[,value...]}[,{value[,value...]}...]} Definition: Set the per-target tagged queue depth on a per controller basis. Both controllers and targets - may be ommitted indicating that they should retain + may be omitted indicating that they should retain the default tag depth. Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32} On Controller 0 @@ -291,7 +291,7 @@ The following information is available in this file: The rd_strm_bitmask is a 16 bit hex value in which each bit represents a target. Setting the target's bit to '1' enables read streaming for that - target. Controllers may be ommitted indicating that + target. Controllers may be omitted indicating that they should retain the default read streaming setting. Example: rd_strm:{0x0041} On Controller 0 @@ -313,7 +313,7 @@ The following information is available in this file: ----------------------------------------------------------------- Option: dv: {value[,value...]} Definition: Set Domain Validation Policy on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default read streaming setting. Example: dv:{-1,0,,1,1,0} On Controller 0 leave DV at its default setting. @@ -340,7 +340,7 @@ The following information is available in this file: Option: precomp: {value[,value...]} Definition: Set IO Cell precompensation value on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default precompensation setting. Example: precomp:{0x1} On Controller 0 set precompensation to 1. @@ -353,7 +353,7 @@ The following information is available in this file: ----------------------------------------------------------------- Option: slewrate: {value[,value...]} Definition: Set IO Cell slew rate on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default slew rate setting. Example: slewrate:{0x1} On Controller 0 set slew rate to 1. @@ -366,7 +366,7 @@ The following information is available in this file: ----------------------------------------------------------------- Option: amplitude: {value[,value...]} Definition: Set IO Cell signal amplitude on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default read streaming setting. Example: amplitude:{0x1} On Controller 0 set amplitude to 1. diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index 45d61ad..ac41a9f 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -303,7 +303,7 @@ (scb) and calls a local function issue_cmd(), which writes a scb command into subsystem I/O ports. Once the scb command is carried out, the interrupt_handler() is invoked. If a device is determined to be - existant and it has not assigned any ldn, it gets one dynamically. + existent and it has not assigned any ldn, it gets one dynamically. For this, the whole stuff is done in ibmmca_queuecommand().

2.6 Abort & Reset Commands @@ -741,7 +741,7 @@ some error appeared, else it is undefined. Now, this is fixed. Before any SCB command gets queued, the tsb.dev_status is set to 0, so the cmd->result won't screw up Linux higher level drivers. - 2) The reset-function has slightly improved. This is still planed for + 2) The reset-function has slightly improved. This is still planned for abort. During the abort and the reset function, no interrupts are allowed. This is however quite hard to cope with, so the INT-status register is read. When the interrupt gets queued, one can find its diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt index 032399b..ade046e 100644 --- a/Documentation/scsi/scsi-changer.txt +++ b/Documentation/scsi/scsi-changer.txt @@ -102,7 +102,7 @@ Trouble?

If you insmod the driver with "insmod debug=1", it will be verbose and prints a lot of stuff to the syslog. Compiling the kernel with -CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot +CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages a lot because the kernel will translate the error codes into human-readable strings then.

diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 7acbebb..6ff16b6 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -290,7 +290,7 @@ scmd->allowed. SCSI transports/LLDDs automatically acquire sense data on command failures (autosense). Autosense is recommended for performance reasons and as sense information could get out of - sync inbetween occurrence of CHECK CONDITION and this action. + sync between occurrence of CHECK CONDITION and this action.

Note that if autosense is not supported, scmd->sense_buffer contains invalid sense data when error-completing the scmd diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index e00192d..f79282f 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -291,7 +291,7 @@ Transport <-> LLDD Interfaces : Vport support by LLDD:

The LLDD indicates support for vports by supplying a vport_create() - function in the transport template. The presense of this function will + function in the transport template. The presence of this function will cause the creation of the new attributes on the fc_host. As part of the physical port completing its initialization relative to the transport, it should set the max_npiv_vports attribute to indicate the diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio index d104439..5d2a33b 100644 --- a/Documentation/serial/moxa-smartio +++ b/Documentation/serial/moxa-smartio @@ -473,7 +473,7 @@ Content spd_normal Use 38.4kb when the application requests 38.4kb. spd_cust Use the custom divisor to set the speed when the application requests 38.4kb. - divisor This option set the custom divison. + divisor This option set the custom division. baud_base This option set the base baud rate.

----------------------------------------------------------------------------- diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt index 397f41a..a5d9112 100644 --- a/Documentation/serial/n_gsm.txt +++ b/Documentation/serial/n_gsm.txt @@ -34,7 +34,7 @@ Major parts of the initialization program : /* configure the serial port : speed, flow control ... */

/* send the AT commands to switch the modem to CMUX mode - and check that it's succesful (should return OK) */ + and check that it's successful (should return OK) */ write(fd, "AT+CMUX=0\r", 10);

/* experience showed that some modems need some time before diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3c1eddd..b9b7f30 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) or the value stored in the card's EEPROM for cards that have an EEPROM and their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can - be choosen freely from the options enumerated above. + be chosen freely from the options enumerated above.

If dma2 is specified and different from dma1, the card will operate in full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to @@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) or the value stored in the card's EEPROM for cards that have an EEPROM and their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can - be choosen freely from the options enumerated above. + be chosen freely from the options enumerated above.

If dma2 is specified and different from dma1, the card will operate in full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS index c615deb..4be2594 100644 --- a/Documentation/sound/oss/README.OSS +++ b/Documentation/sound/oss/README.OSS @@ -1352,7 +1352,7 @@ OSS-mixer. The PCM20 contains a radio tuner, which is also controlled by ACI. This radio tuner is supported by the ACI driver together with the miropcm20.o module. Also the 7-band equalizer is integrated -(limited by the OSS-design). Developement has started and maybe +(limited by the OSS-design). Development has started and maybe finished for the RDS decoder on this card, too. You will be able to read RadioText, the Programme Service name, Programme TYpe and others. Even the v4l radio module benefits from it with a refined diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 68a4fe3..493dada 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -143,7 +143,7 @@ configured to use SSPFRM instead. NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the chipselect is dropped after each spi_transfer. Most devices need chip select asserted around the complete message. Use SSPFRM as a GPIO (through cs_control) -to accomodate these chips. +to accommodate these chips.

NSSP SLAVE SAMPLE diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp index 34a9cfd..463f6d0 100644 --- a/Documentation/spi/spi-lm70llp +++ b/Documentation/spi/spi-lm70llp @@ -46,7 +46,7 @@ The hardware interfacing on the LM70 LLP eval board is as follows:

Note that since the LM70 uses a "3-wire" variant of SPI, the SI/SO pin is connected to both pin D7 (as Master Out) and Select (as Master In) -using an arrangment that lets either the parport or the LM70 pull the +using an arrangement that lets either the parport or the LM70 pull the pin low. This can't be shared with true SPI devices, but other 3-wire devices might share the same SI/SO pin.

diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt index 4fb314d..db94fb6 100644 --- a/Documentation/telephony/ixj.txt +++ b/Documentation/telephony/ixj.txt @@ -51,7 +51,7 @@ be removed to protect the rights of others. Specifically, very old Internet PhoneJACK cards have non-standard G.723.1 codecs (due to the early nature of the DSPs in those days). The auto-conversion code to bring those cards into compliance with -todays standards is available as a binary only module to those people +today's standards is available as a binary only module to those people needing it. If you bought your card after 1997 or so, you are OK - it's only the very old cards that are affected.

diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt index d299ff3..7d350b4 100644 --- a/Documentation/trace/ring-buffer-design.txt +++ b/Documentation/trace/ring-buffer-design.txt @@ -237,7 +237,7 @@ with the previous write. |written | +---------+ |written | - +---------+ <--- next positon for write (current commit) + +---------+ <--- next position for write (current commit) | empty | +---------+

diff --git a/Documentation/video4linux/README.pvrusb2 b/Documentation/video4linux/README.pvrusb2 index a747200..2137b58 100644 --- a/Documentation/video4linux/README.pvrusb2 +++ b/Documentation/video4linux/README.pvrusb2 @@ -172,7 +172,7 @@ Source file list / functional overview: to provide a streaming API usable by a read() system call style of I/O. Right now this is the only layer on top of pvrusb2-io.[ch], however the underlying architecture here was intended to allow for - other styles of I/O to be implemented with additonal modules, like + other styles of I/O to be implemented with additional modules, like mmap()'ed buffers or something even more exotic.

pvrusb2-main.c - This is the top level of the driver. Module level diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README index 3a367cd..7cbf4fb 100644 --- a/Documentation/video4linux/bttv/README +++ b/Documentation/video4linux/bttv/README @@ -70,7 +70,7 @@ If you have trouble with some specific TV card, try to ask there instead of mailing me directly. The chance that someone with the same card listens there is much higher...

-For problems with sound: There are alot of different systems used +For problems with sound: There are a lot of different systems used for TV sound all over the world. And there are also different chips which decode the audio signal. Reports about sound problems ("stereo does'nt work") are pretty useless unless you include some details diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze index 4259dcc..5eddfa0 100644 --- a/Documentation/video4linux/bttv/README.freeze +++ b/Documentation/video4linux/bttv/README.freeze @@ -33,7 +33,7 @@ state is stuck.

I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid for some people. Thus probably a small buglet left somewhere in bttv -0.7.x. I have no idea where exactly, it works stable for me and alot of +0.7.x. I have no idea where exactly, it works stable for me and a lot of other people. But in case you have problems with the 0.7.x versions you can give 0.8.x a try ...

diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ index 1e6328f..b6e6deb 100644 --- a/Documentation/video4linux/bttv/Sound-FAQ +++ b/Documentation/video4linux/bttv/Sound-FAQ @@ -2,7 +2,7 @@ bttv and sound mini howto =========================

-There are alot of different bt848/849/878/879 based boards available. +There are a lot of different bt848/849/878/879 based boards available. Making video work often is not a big deal, because this is handled completely by the bt8xx chip, which is common on all boards. But sound is handled in slightly different ways on each board. diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt index 4f6d0ca..51ed157 100644 --- a/Documentation/video4linux/pxa_camera.txt +++ b/Documentation/video4linux/pxa_camera.txt @@ -84,12 +84,12 @@ DMA usage transfer is not started. On "End Of Frame" interrupt, the irq handler starts the DMA chain. - capture of one videobuffer - The DMA chain starts transfering data into videobuffer RAM pages. - When all pages are transfered, the DMA irq is raised on "ENDINTR" status + The DMA chain starts transferring data into videobuffer RAM pages. + When all pages are transferred, the DMA irq is raised on "ENDINTR" status - finishing one videobuffer The DMA irq handler marks the videobuffer as "done", and removes it from the active running queue - Meanwhile, the next videobuffer (if there is one), is transfered by DMA + Meanwhile, the next videobuffer (if there is one), is transferred by DMA - finishing the last videobuffer On the DMA irq of the last videobuffer, the QCI is stopped.

@@ -101,7 +101,7 @@ DMA usage

This structure is pointed by dma->sg_cpu. The descriptors are used as follows : - - desc-sg[i]: i-th descriptor, transfering the i-th sg + - desc-sg[i]: i-th descriptor, transferring the i-th sg element to the video buffer scatter gather - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN - linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0 diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 3b15608..cf21f7a 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -343,7 +343,7 @@ ignored. If you want to check for errors use this: err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);

Any error except -ENOIOCTLCMD will exit the loop with that error. If no -errors (except -ENOIOCTLCMD) occured, then 0 is returned. +errors (except -ENOIOCTLCMD) occurred, then 0 is returned.

The second argument to both calls is a group ID. If 0, then all subdevs are called. If non-zero, then only those whose group ID match that value will diff --git a/Documentation/vm/active_mm.txt b/Documentation/vm/active_mm.txt index 4ee1f64..dbf4581 100644 --- a/Documentation/vm/active_mm.txt +++ b/Documentation/vm/active_mm.txt @@ -74,7 +74,7 @@ we have a user context", and is generally done by the page fault handler and things like that).

Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago, -because it slightly changes the interfaces to accomodate the alpha (who +because it slightly changes the interfaces to accommodate the alpha (who would have thought it, but the alpha actually ends up having one of the ugliest context switch codes - unlike the other architectures where the MM and register state is separate, the alpha PALcode joins the two, and you diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 457634c..f8551b3 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -72,7 +72,7 @@ number of huge pages requested. This is the most reliable method of allocating huge pages as memory has not yet become fragmented.

Some platforms support multiple huge page sizes. To allocate huge pages -of a specific size, one must preceed the huge pages boot command parameters +of a specific size, one must precede the huge pages boot command parameters with a huge page size selection parameter "hugepagesz=<size>". <size> must be specified in bytes with optional scale suffix [kKmMgG]. The default huge page size may be selected with the "default_hugepagesz=<size>" boot parameter. diff --git a/Documentation/vm/overcommit-accounting b/Documentation/vm/overcommit-accounting index 21c7b1f..706d7ed 100644 --- a/Documentation/vm/overcommit-accounting +++ b/Documentation/vm/overcommit-accounting @@ -4,7 +4,7 @@ The Linux kernel supports the following overcommit handling modes address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to - allocate slighly more memory in this mode. This is the + allocate slightly more memory in this mode. This is the default.

1 - Always overcommit. Appropriate for some scientific diff --git a/Documentation/w1/slaves/w1_ds2423 b/Documentation/w1/slaves/w1_ds2423 index 90a65d2..3f98b50 100644 --- a/Documentation/w1/slaves/w1_ds2423 +++ b/Documentation/w1/slaves/w1_ds2423 @@ -21,8 +21,8 @@ value and associated ram buffer is outpputed to own line.

Each lines will contain the values of 42 bytes read from the counter and memory page along the crc=YES or NO for indicating whether the read operation -was successfull and CRC matched. -If the operation was successfull, there is also in the end of each line +was successful and CRC matched. +If the operation was successful, there is also in the end of each line a counter value expressed as an integer after c=

Meaning of 42 bytes represented is following: @@ -34,7 +34,7 @@ Meaning of 42 bytes represented is following: - crc=YES/NO indicating whether read was ok and crc matched - c=<int> current counter value

-example from the successfull read: +example from the successful read: 00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2 00 02 00 00 00 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2 00 29 c6 5d 18 00 00 00 00 04 37 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=408798761 diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink index 804445f..f59a319 100644 --- a/Documentation/w1/w1.netlink +++ b/Documentation/w1/w1.netlink @@ -81,7 +81,7 @@ which will contain list of all registered master ids in the following format:

cn_msg (CN_W1_IDX.CN_W1_VAL as id, len is equal to sizeof(struct - w1_netlink_msg) plus number of masters multipled by 4) + w1_netlink_msg) plus number of masters multiplied by 4) w1_netlink_msg (type: W1_LIST_MASTERS, len is equal to number of masters multiplied by 4 (u32 size)) id0 ... idN diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt index 9c24d5f..9488078 100644 --- a/Documentation/watchdog/hpwdt.txt +++ b/Documentation/watchdog/hpwdt.txt @@ -8,7 +8,7 @@ Last reviewed: 06/02/2009 The HP iLO2 NMI Watchdog driver is a kernel module that provides basic watchdog functionality and the added benefit of NMI sourcing. Both the watchdog functionality and the NMI sourcing capability need to be enabled - by the user. Remember that the two modes are not dependant on one another. + by the user. Remember that the two modes are not dependent on one another. A user can have the NMI sourcing without the watchdog timer and vice-versa.

Watchdog functionality is enabled like any other common watchdog driver. That diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h index 9baae8a..da5449e 100644 --- a/arch/alpha/include/asm/elf.h +++ b/arch/alpha/include/asm/elf.h @@ -101,7 +101,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];

#define ELF_PLAT_INIT(_r, load_addr) _r->r0 = 0

-/* The registers are layed out in pt_regs for PAL and syscall +/* The registers are laid out in pt_regs for PAL and syscall convenience. Re-order them for the linear elf_gregset_t. */

struct pt_regs; diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c index 4843f6e..cb2801c 100644 --- a/arch/alpha/kernel/core_lca.c +++ b/arch/alpha/kernel/core_lca.c @@ -133,7 +133,7 @@ conf_read(unsigned long addr)

local_irq_save(flags);

- /* Reset status register to avoid loosing errors. */ + /* Reset status register to avoid losing errors. */ stat0 = *(vulp)LCA_IOC_STAT0; *(vulp)LCA_IOC_STAT0 = stat0; mb(); @@ -170,7 +170,7 @@ conf_write(unsigned long addr, unsigned int value)

local_irq_save(flags); /* avoid getting hit by machine check */

- /* Reset status register to avoid loosing errors. */ + /* Reset status register to avoid losing errors. */ stat0 = *(vulp)LCA_IOC_STAT0; *(vulp)LCA_IOC_STAT0 = stat0; mb(); diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 648ae88..ae54ad9 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1027,7 +1027,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) * normal operation, dismiss them. * * Dismiss if: - * C_STAT = 0x14 (Error Reponse) + * C_STAT = 0x14 (Error Response) * C_STS<3> = 0 (C_ADDR valid) * C_ADDR<42> = 1 (I/O) * C_ADDR<31:22> = 111110xxb (PCI Config space) diff --git a/arch/alpha/lib/ev67-strrchr.S b/arch/alpha/lib/ev67-strrchr.S index 3fd8bf4..dd0d8c6 100644 --- a/arch/alpha/lib/ev67-strrchr.S +++ b/arch/alpha/lib/ev67-strrchr.S @@ -82,7 +82,7 @@ $loop: $eos: negq t1, t4 # E : isolate first null byte match and t1, t4, t4 # E : - subq t4, 1, t5 # E : build a mask of the bytes upto... + subq t4, 1, t5 # E : build a mask of the bytes up to... or t4, t5, t4 # E : ... and including the null

and t3, t4, t3 # E : mask out char matches after null diff --git a/arch/alpha/lib/fls.c b/arch/alpha/lib/fls.c index 32afaa3..ddd048c 100644 --- a/arch/alpha/lib/fls.c +++ b/arch/alpha/lib/fls.c @@ -6,7 +6,7 @@ #include <linux/bitops.h>

/* This is fls(x)-1, except zero is held to zero. This allows most - efficent input into extbl, plus it allows easy handling of fls(0)=0. */ + efficient input into extbl, plus it allows easy handling of fls(0)=0. */

const unsigned char __flsm1_tab[256] = { diff --git a/arch/alpha/lib/strrchr.S b/arch/alpha/lib/strrchr.S index 82cfd0a..1970dc0 100644 --- a/arch/alpha/lib/strrchr.S +++ b/arch/alpha/lib/strrchr.S @@ -54,7 +54,7 @@ $loop: $eos: negq t1, t4 # e0 : isolate first null byte match and t1, t4, t4 # e1 : - subq t4, 1, t5 # e0 : build a mask of the bytes upto... + subq t4, 1, t5 # e0 : build a mask of the bytes up to... or t4, t5, t4 # e1 : ... and including the null

and t3, t4, t3 # e0 : mask out char matches after null diff --git a/arch/alpha/oprofile/op_model_ev67.c b/arch/alpha/oprofile/op_model_ev67.c index 7030208..5b9d178 100644 --- a/arch/alpha/oprofile/op_model_ev67.c +++ b/arch/alpha/oprofile/op_model_ev67.c @@ -192,7 +192,7 @@ ev67_handle_interrupt(unsigned long which, struct pt_regs *regs, case TRAP_INVALID1: case TRAP_INVALID2: case TRAP_INVALID3: - /* Pipeline redirection ocurred. PMPC points + /* Pipeline redirection occurred. PMPC points to PALcode. Recognize ITB miss by PALcode offset address, and get actual PC from EXC_ADDR. */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5b9f78b..fdc9d4d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -694,7 +694,7 @@ config ARCH_S3C2410 the Samsung SMDK2410 development board (and derivatives).

Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no seperate machine + the same SoC ID code. This means that there is no separate machine directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.

config ARCH_S3C64XX diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 901e6df..2cef8e1 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -34,7 +34,7 @@ config PROCESSOR_ID used instead of the auto-probing which utilizes the register.

config REMAP_VECTORS_TO_RAM - bool 'Install vectors to the begining of RAM' if DRAM_BASE + bool 'Install vectors to the beginning of RAM' if DRAM_BASE depends on DRAM_BASE help The kernel needs to change the hardware exception vectors. diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 8f0f86d..97912fa 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], unsigned lcnt0, lcnt1, ljmp0, ljmp1; struct _arg_LPEND lpend;

- /* Max iterations possibile in DMALP is 256 */ + /* Max iterations possible in DMALP is 256 */ if (*bursts >= 256*256) { lcnt1 = 256; lcnt0 = 256; @@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi) }

for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occured */ + if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); int active; diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h index ee5e03e..3ad4c10 100644 --- a/arch/arm/include/asm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -18,7 +18,7 @@ * VFP storage area has: * - FPEXC, FPSCR, FPINST and FPINST2. * - 16 or 32 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) + * - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6) * * FPEXC will always be non-zero once the VFP has been used in this process. */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index c7afbc5..7e30874 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -126,7 +126,7 @@ #endif

#if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model +#error Unknown cache maintenance model #endif

#ifndef MULTI_CACHE diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index 0ec35d1..fbf71d7 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -10,8 +10,8 @@ * * This file provides the glue to stick the processor-specific bits * into the kernel in an efficient manner. The idea is to use branches - * when we're only targetting one class of TLB, or indirect calls - * when we're targetting multiple classes of TLBs. + * when we're only targeting one class of TLB, or indirect calls + * when we're targeting multiple classes of TLBs. */ #ifdef __KERNEL__

diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index f35b86e..e4a04e4 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -16,7 +16,7 @@ * make it not entierly compatible with the PL080 specification from * ARM. When in doubt, check the Samsung documentation first. * - * The Samsung defines are PL080S, and add an extra controll register, + * The Samsung defines are PL080S, and add an extra control register, * the ability to move more than 2^11 counts of data and some extra * OneNAND features. */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 9a87823..885be09 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -249,7 +249,7 @@ do { \ * cache totally. This means that the cache becomes inconsistent, and, * since we use normal loads/stores as well, this is really bad. * Typically, this causes oopsen in filp_close, but could have other, - * more disasterous effects. There are two work-arounds: + * more disastrous effects. There are two work-arounds: * 1. Disable interrupts and emulate the atomic swap * 2. Clean the cache, perform atomic swap, flush the cache * diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index 47f023a..14749ae 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -47,7 +47,7 @@ struct crunch_sigframe { #endif

#ifdef CONFIG_IWMMXT -/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ +/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */ #define IWMMXT_MAGIC 0x12ef842a #define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8)

diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 7a57609..40ee7e5 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data,

if (res == 0) { /* - * Barrier also required between aquiring a lock for a + * Barrier also required between acquiring a lock for a * protected resource and accessing the resource. Inserted for * same reason as above. */ diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 2e74a19..295e1e7 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = { .pullup_pin = AT91_PIN_PD9, };

-/* FIXME: user dependant */ +/* FIXME: user dependent */ // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 27ac6f5..02182c1 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -102,7 +102,7 @@ #define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ #define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ #define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ +#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ #define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ #define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ #define AT91_MCI_OVRE (1 << 30) /* Overrun */ diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index ddeb645..056dc66 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -208,7 +208,7 @@ extern void at91_gpio_resume(void);

/*-------------------------------------------------------------------------*/

-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should +/* wrappers for "new style" GPIO calls. the old AT91-specific ones should * eventually be removed (along with this errno.h inclusion), and the * gpio request/free calls should probably be implemented. */ diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index 77f84b4..a1f3283 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Config

/****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Cha /** * @brief Read data DMAed to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurat /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 8d1baf3..d87ad30 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring); * Configures a DMA channel. * * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. @@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle) /** * Initializes all of the data structures associated with the DMA. * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h index 6c8da2b..e6a1dc4 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h @@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurati /** * @brief Read data DMA transferred to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle *

/****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void); /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 70eaea8..1619733 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -180,7 +180,7 @@ typedef enum {

#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */

-/* Programable pin defines */ +/* Programmable pin defines */ #define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF) /* GPIO pin 0 - 60 */ #define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index c78833a..03238c2 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void)

/****************************************************************************/ /** -* @brief Lower layer funtion to enable/disable a clock of a certain device +* @brief Lower layer function to enable/disable a clock of a certain device * * This function enables/disables a core clock * diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index e01fc46..0aeb6a6 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -109,9 +109,9 @@ #define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM)

/* INTC1 - interrupt controller 1 */ -#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */ +#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */ #define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */ -#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */ +#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interrupt (For A0 only)) */ #define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */ #define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */ /* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 06a3554..0992842 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -88,7 +88,7 @@ /* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ /* Enable wait pin during burst write or read */ #define REG_UMI_TCR_WAITEN 0x80000000 -/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */ #define REG_UMI_TCR_LOWFREQ 0x40000000 /* 1=synch write, 0=async write */ #define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c389ff..3e7be2d 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -11,7 +11,7 @@ * DM644X-EVM board. It has: * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. - * Additionaly realtime clock, IR remote control receiver, + * Additionally realtime clock, IR remote control receiver, * IR Blaster based on MSP430 (firmware although is different * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive * with PATA interface, two muxed red-green leds. diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 4a68c2b..0a95be1 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -167,7 +167,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accomodate addition of drivers + * Setting the latency to 2000 us to accommodate addition of drivers * to pre/post change notification list. */ policy->cpuinfo.transition_latency = 2000 * 1000; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68fe4c2..b95b919 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1123,7 +1123,7 @@ void __init da850_init(void) * This helps keeping the peripherals on this domain insulated * from CPU frequency changes caused by DVFS. The firmware sets * both PLL0 and PLL1 to the same frequency so, there should not - * be any noticible change even in non-DVFS use cases. + * be any noticeable change even in non-DVFS use cases. */ da850_set_async3_src(1);

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 76364d1..f680122 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -314,7 +314,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't' this be disabled? */ };

static struct clk timer3_clk = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 9a2376b..5f8a654 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -274,7 +274,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't' this be disabled? */ };

static struct clk_lookup dm644x_clks[] = { diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index cea6b89..957fb87 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -4,7 +4,7 @@ * Author: Kevin Hilman, Deep Root Systems, LLC * * Defines the cpu_is_*() macros for runtime detection of DaVinci - * device type. In addtion, if support for a given device is not + * device type. In addition, if support for a given device is not * compiled in to the kernel, the macros return 0 so that * resulting code can be optimized out. * diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index 180b8a9..a5a9ff7 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { /* - * map discontiguous hw irq range to continous sw irq range: + * map discontiguous hw irq range to continuous sw irq range: * * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) */ diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index 939728b..be9266b 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq

-/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ +/* Practically, GPIO banks up to GPZ are the configurable gpio banks */

/* GPIO bank sizes */ #define EXYNOS4_GPIO_A0_NR (8) diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index af82a8f..14ac10b 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* update interrupt count buffer */ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);

- /* enable MCT tick interupt */ + /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);

tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c index 1b3d3a2d..e8d08bf 100644 --- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-funtion 3 */ + /* Data pin GPK1[3:6] to special-function 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-funtion 2 */ + /* Data pin GPK0[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 85f9433..1e83f8c 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, { u32 ctrl2, ctrl3;

- /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */

ctrl2 = readl(r + S3C_SDHCI_CONTROL2);

diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 773ea0c..ba3dae3 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where) /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atux_pci_status(int clear) @@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = { /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atue_pci_status(int clear) diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index f781164..24294b2 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -15,7 +15,7 @@

/**************************************************************************** * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * the QNAP firmware. * Layout as used by QNAP: * 0x00000000-0x00080000 : "U-Boot" diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index e76d41b..b9c8059 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -41,7 +41,7 @@ * DRAM clocking and refresh are slightly different for systems with DDR * DRAM or regular SDRAM devices. If SDRAM is used in the system, the * SDRAM will still be accessible in direct-run mode. In DDR based systems, - * a transistion to direct-run mode will stop all DDR accesses (no clocks). + * a transition to direct-run mode will stop all DDR accesses (no clocks). * Because of this, the code to switch power modes and the code to enter * and exit DRAM self-refresh modes must not be executed in DRAM. A small * section of IRAM is used instead for this. diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index aeb9ae2..99833b9 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -9,7 +9,7 @@ * 2008-04-11: Jason Chagas Jason.chagas@marvell.com * 2008-10-08: Bin Yang bin.yang@marvell.com * - * The timers module actually includes three timers, each timer with upto + * The timers module actually includes three timers, each timer with up to * three match comparators. Timer #0 is used here in free-running mode as * the clock source, and match comparator #1 used as clock event device. * diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c index 7ffbd98..805d4ee 100644 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse) } }

- /* Set wait states for CPU inbetween frequency changes */ + /* Set wait states for CPU between frequency changes */ reg_clkctl = readl(A11S_CLK_CNTL_ADDR); reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ writel(reg_clkctl, A11S_CLK_CNTL_ADDR); diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index cfa808d..232f97a 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock); * @id: command to be executed * @buf: buffer returned from scm_get_command_buffer() * - * An SCM command is layed out in memory as follows: + * An SCM command is laid out in memory as follows: * * ------------------- <--- struct scm_command * | command header | diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 927d5a1..c1c5fb6 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -79,7 +79,7 @@

/* - * Register useage + * Register usage * r8 - temporary * r9 - the driver buffer * r10 - temporary diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d41fe2d..0ad781d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -399,7 +399,7 @@ static void __init omap_sx1_init(void) sx1_mmc_init();

/* turn on USB power */ - /* sx1_setusbpower(1); cant do it here because i2c is not ready */ + /* sx1_setusbpower(1); can't do it here because i2c is not ready */ gpio_request(1, "A_IRDA_OFF"); gpio_request(11, "A_SWITCH"); gpio_request(15, "A_USB_ON"); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b0f4c23..36f26c3 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {} * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 7a2df29..23eed00 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -31,7 +31,7 @@ #endif

/* - * These are the offsets from the begining of the fiq_buffer. They are put here + * These are the offsets from the beginning of the fiq_buffer. They are put here * since the buffer and header need to be accessed by drivers servicing devices * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5f8a2fd..34cf982 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -696,7 +696,7 @@ static void __init igep2_init(void) igep2_init_smsc911x();

/* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep2_wlan_bt_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index b10db0e..2cf86c3 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -440,7 +440,7 @@ static void __init igep3_init(void) igep3_leds_init();

/* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep3_wifi_bt_init(); diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab87854..6cb6c03 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, * clkdm_init - set up the clockdomain layer * @clkdms: optional pointer to an array of clockdomains to register * @init_autodeps: optional pointer to an array of autodeps to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Set up internal state. If a pointer to an array of clockdomains * @clkdms was supplied, loop through the list of clockdomains, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 85b3dce..5823584 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -125,7 +125,7 @@ struct clockdomain { };

/** - * struct clkdm_ops - Arch specfic function implementations + * struct clkdm_ops - Arch specific function implementations * @clkdm_add_wkdep: Add a wakeup dependency between clk domains * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains * @clkdm_read_wkdep: Read wakeup dependency state between clk domains diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index a44c523..1c240ef 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);

/** * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states upto and including this for mpu domain - * @core_deepest_state: Enable states upto and including this for core domain + * @mpu_deepest_state: Enable states up to and including this for mpu domain + * @core_deepest_state: Enable states up to and including this for core domain * * This goes through the list of states available and enables and disables the * validity of C states based on deepest state that can be achieved for the diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 84d1b73..7b85585 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data ARRAY_SIZE(omap_keyboard_latency), 0);

if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } @@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) od = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata), omap_mcspi_latency, ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -725,7 +725,7 @@ static int __init omap_init_wdt(void) od = omap_device_build(dev_name, id, oh, NULL, 0, omap_wdt_latency, ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 34922b2..c9ff0e7 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 413de18..9529842 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) kfree(pdata);

if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 137e1a5..b2f30be 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 565b906..4a6ef6a 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) ARRAY_SIZE(omap2_mcbsp_latency), false); kfree(pdata); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index bb043cb..a4ab1e3 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) seq_printf(s, "/* %s */\n", m->muxnames[mode]);

/* - * XXX: Might be revisited to support differences accross + * XXX: Might be revisited to support differences across * same OMAP generation. */ seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def); diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h index adbea0d..9fd9314 100644 --- a/arch/arm/mach-omap2/mux2430.h +++ b/arch/arm/mach-omap2/mux2430.h @@ -22,7 +22,7 @@ * absolute addresses. The name in the macro is the mode-0 name of * the pin. NOTE: These registers are 8-bits wide. * - * Note that these defines use SDMMC instead of MMC for compability + * Note that these defines use SDMMC instead of MMC for compatibility * with signal names used in 3630. */ #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a860fb5..e6e3810 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { * I2CHS IP's do not follow the usual pattern. * prcm_reg_id alone cannot be used to program * the iclk and fclk. Needs to be handled using - * additonal flags when clk handling is moved + * additional flags when clk handling is moved * to hwmod framework. */ .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index e2e605f..05f6abc 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on) else /* * Enable VBUS Valid, AValid and IDDIG - * high impedence + * high impedance */ __raw_writel(IDDIG | AVALID | VBUSVALID, ctrl_base + USBOTGHS_CONTROL); } else { - /* Enable session END and IDIG to high impedence. */ + /* Enable session END and IDIG to high impedance. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 0a8e74e..07d6140 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -308,7 +308,7 @@ int __init omap3_twl_init(void) * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, * in those scenarios this bit is to be cleared (enable = false). * - * Returns 0 on sucess, error is returned if I2C read/write fails. + * Returns 0 on success, error is returned if I2C read/write fails. */ int __init omap3_twl_set_sr_bit(bool enable) { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 49c6513..9af0847 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer * @pwrdm_list: array of struct powerdomain pointers to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Loop through the array of powerdomains @pwrdm_list, registering all * that are available on the current CPU. If pwrdm_list is supplied diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 027f40b..d23d979 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -121,7 +121,7 @@ struct powerdomain { };

/** - * struct pwrdm_ops - Arch specfic function implementations + * struct pwrdm_ops - Arch specific function implementations * @pwrdm_set_next_pwrst: Set the target power state for a pd * @pwrdm_read_next_pwrst: Read the target power state set for a pd * @pwrdm_read_pwrst: Read the current power state of a pd diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 9c9c113..469a920 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {

/* * The USBTLL Save-and-Restore mechanism is broken on - * 3430s upto ES3.0 and 3630ES1.0. Hence this feature + * 3430s up to ES3.0 and 3630ES1.0. Hence this feature * needs to be disabled on these chips. * Refer: 3430 errata ID i459 and 3630 errata ID i579 * diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 8f674c9..13e24f9 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currenly this function registers interrrupt handler for a particular SR + * Currently this function registers interrrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c6facf7..6fb5209 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -851,7 +851,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, * @voltdm: pointer to the VDD whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed - * to be at and resets the voltage to that level. Should be used expecially + * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ void omap_voltage_reset(struct voltagedomain *voltdm) @@ -912,7 +912,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * This API searches only through the non-compensated voltages int the * voltage table. * Returns pointer to the voltage table entry corresponding to volt on - * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage + * success. Returns -ENODATA if no voltage table exisits for the passed voltage * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 1a5d6a0..5ceafdc 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -19,7 +19,7 @@ #include "common.h"

/* - * The Orion has fully programable address map. There's a separate address + * The Orion has fully programmable address map. There's a separate address * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own * address decode windows that allow it to access any of the Orion resources. diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 429ecaf..a5930f8 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -190,7 +190,7 @@ err_free_1: * The power front LEDs (blue and red) and SATA red LEDs are controlled via a * single GPIO line and are compatible with the leds-gpio driver. * - * The SATA blue LEDs have some hardware blink capabilities which are detailled + * The SATA blue LEDs have some hardware blink capabilities which are detailed * in the following array: * * SATAx blue LED | SATAx activity | LED state diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index f0f43e1..e6d6449 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -36,7 +36,7 @@

/**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 92f393f..9eac819 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -56,7 +56,7 @@

/**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index e4fb466..207ecb4 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -38,7 +38,7 @@ #define PCMD(x) __REG(0x40F50110 + ((x) << 2))

/* - * Slave Power Managment Unit + * Slave Power Management Unit */ #define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ #define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index faa408a..0641f31 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -64,7 +64,7 @@

/* * CPLD registers: - * Only 4 registers, but spreaded over a 32MB address space. + * Only 4 registers, but spread over a 32MB address space. * Be gentle, and remap that over 32kB... */

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index dd13bb6..23925db 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -458,7 +458,7 @@ static struct platform_device strataflash = { /* * Suspend/Resume bootstrap management * - * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, + * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled, * this sequence is as follows : * - disables interrupts * - initialize SDRAM (self refresh RAM into active RAM) diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index cf68136..b2b2a5b 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -19,7 +19,7 @@ #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */

/* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) + * number of DMA channels, and not of all of them (dependent on the device) * can be attached to any DMA source. We therefore let the DMA core handle * the allocation of hardware channels to clients. */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 7f7c529..988a686 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -101,7 +101,7 @@ #define S3C2410_BANKCON_PMC16 (0x03)

/* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on + * 6 and 7 have different configurations depending on * the memory type bits */

#define S3C2410_BANKCON_Tacp2 (0x0 << 2) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 66f4444..079dcaa 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .def_trigger = "", };

-/* This is the blue LED on the device. Originaly used to indicate GPS activity +/* This is the blue LED on the device. Originally used to indicate GPS activity * by flashing. */ static struct s3c24xx_led_platdata n35_blue_led_pdata = { .name = "blue_led", diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dfedc9c..dd3120d 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { * the same timings, however, anything smaller than 1024x768 * will only be displayed in the top left corner of a 1024x768 * XGA output unless you add optional dip switches to the shield. - * Therefore timings for other resolutions have been ommited here. + * Therefore timings for other resolutions have been omitted here. */ [2] = { _LCD_DECLARE( diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index c35585c..b197171 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) case S3C2410_DMAOP_FLUSH: return s3c64xx_dma_flush(chan);

- /* belive PAUSE/RESUME are no-ops */ + /* believe PAUSE/RESUME are no-ops */ case S3C2410_DMAOP_PAUSE: case S3C2410_DMAOP_RESUME: case S3C2410_DMAOP_STARTED: diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h index 4be4cc9..07aa4d6 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h @@ -29,7 +29,7 @@ #define WPALCON_H (0x19c) #define WPALCON_L (0x1a0)

-/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but +/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but * different for WPAL2-4 */ /* In WPALCON_L (aka WPALCON) */ diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index f16946e..be25879 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3;

- /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */

writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);

diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index 1f4b595..a5a1e33 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq

-/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ +/* Practically, GPIO banks up to MP03 are the configurable gpio banks */

/* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8) diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 746777d..3e3ac05 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

switch (width) { case 8: - /* GPG1[3:6] special-funtion 3 */ + /* GPG1[3:6] special-function 3 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); case 4: - /* GPG0[3:6] special-funtion 2 */ + /* GPG0[3:6] special-function 2 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); default: break; diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index c32e202..a83b6c9 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3;

- /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */

writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);

diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e697691..41252d2 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o # LEDs support obj-$(CONFIG_LEDS) += $(led-y)

-# Miscelaneous functions +# Miscellaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o

diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 07d4e8b..aaa8acf 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -68,7 +68,7 @@ * clock change in ROM and jump to that code from the kernel. The main * disadvantage is that the ROM has to be modified, which is not * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unecessary complicated. + * jumping to ROM makes clock switching unnecessary complicated. * * The idea behind this driver is that the memory configuration can be * changed while running from DRAM (even with interrupts turned on!) diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index 4f7ea01..bae8296 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1794,7 +1794,7 @@ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))

-#define DCSR_RUN 0x00000001 /* DMA RUNing */ +#define DCSR_RUN 0x00000001 /* DMA running */ #define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ #define DCSR_ERROR 0x00000004 /* DMA ERROR */ #define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 9d490c6..f50b00b 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte * - * we need to reverse all data we recieve from the mcu due to its physical location + * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 */ u8 inline jornada_ssp_reverse(u8 byte) @@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev)

static int jornada_ssp_remove(struct platform_device *dev) { - /* Note that this doesnt actually remove the driver, since theres nothing to remove + /* Note that this doesn't actually remove the driver, since theres nothing to remove * It just makes sure everything is turned off */ GPSR = GPIO_GPIO25; ssp_exit(); diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index e945ae2..f4ef5eb 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, * - Change the source selector to invalid to stop the DMA from * FIFO to memory. * - Read the status register to know the number of pending - * bytes to be transfered. + * bytes to be transferred. * - Finally stop or program the DMA to the next buffer in the * list. */ @@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, if (status & STA_BUSY) req->bytes_transferred -= to_transfer;

- /* In continous transfer mode, DMA only tracks the count of the + /* In continuous transfer mode, DMA only tracks the count of the * half DMA buffer. So, if the DMA already finished half the DMA * then add the half buffer to the completed count. * diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index 39011bd..d0132e8 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -92,11 +92,11 @@ struct tegra_dma_req { /* This is a called from the DMA ISR context when the DMA is still in * progress and is actively filling same buffer. * - * In case of continous mode receive, this threshold is 1/2 the buffer + * In case of continuous mode receive, this threshold is 1/2 the buffer * size. In other cases, this will not even be called as there is no * hardware support for it. * - * In the case of continous mode receive, if there is next req already + * In the case of continuous mode receive, if there is next req already * queued, DMA programs the HW to use that req when this req is * completed. If there is no "next req" queued, then DMA ISR doesn't do * anything before calling this callback. diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index fabcc49..5535dd0 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) */ long clk_round_rate(struct clk *clk, unsigned long rate) { - /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ + /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ /* Else default to fixed value */

if (clk->round_rate) { diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index dc8746d..af91374 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -52,7 +52,7 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { * on value present in GpioSel1 to GpioSel6 and AlternatFunction * register. This is the array of 7 configuration settings. * One has to compile time decide these settings. Below is the - * explaination of these setting + * explanation of these setting * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 0fefb34..16647b2 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -58,7 +58,7 @@ #define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) #define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)

-/* per7 base addressess */ +/* per7 base addresses */ #define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) #define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) #define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) @@ -68,7 +68,7 @@ #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)

-/* per6 base addressess */ +/* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) #define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) @@ -79,11 +79,11 @@ #define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)

-/* per5 base addressess */ +/* per5 base addresses */ #define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) #define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)

-/* per4 base addressess */ +/* per4 base addresses */ #define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) #define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) #define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) @@ -106,7 +106,7 @@ #define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) #define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)

-/* per2 base addressess */ +/* per2 base addresses */ #define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) #define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) #define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index d3644db..f40c696 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -32,7 +32,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * Size Clean (ticks) Dirty (ticks) * 4096 21 20 21 53 55 54 diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 49c2b66..a7b276d 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -34,7 +34,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * *** This needs benchmarking */ diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 6136e68c..dc18d81 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all) * Flush the entire cache system. * The data cache flush is now achieved using atomic clean / invalidates * working outwards from L1 cache. This is done using Set/Way based cache - * maintainance instructions. + * maintenance instructions. * The instruction cache can still be invalidated back to the point of * unification in a single instruction. * diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 226e3d8..6c4e7fd 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768

diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 86d9c2c..4ce947c 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768

diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 83d3dd3..c8884c5 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768

diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 686043e..4136846 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768

diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 665266d..7a06e59 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin) /* * Function: arm720_proc_do_idle(void) * Params : r0 = unused - * Purpose : put the processer in proper idle mode + * Purpose : put the processor in proper idle mode */ ENTRY(cpu_arm720_do_idle) mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 219980e..b46eb21 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 65536

diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 36154b1..95ba1fc 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -54,7 +54,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. (I think this should + * cache line maintenance instructions. (I think this should * be 32768). */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 89c5e000..541e477 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -77,7 +77,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 8192

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index e32fa49..34261f9 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -85,7 +85,7 @@

/* * Sanity check the PTE configuration for the code below - which makes - * certain assumptions about how these bits are layed out. + * certain assumptions about how these bits are laid out. */ #ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 832b6bd..bfa0c9f 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend) mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mrc p15, 0, r9, c1, c0, 1 @ auxillary control register + mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ co-processor access control mrc p15, 0, r11, c1, c0, 0 @ control register stmia r0, {r4 - r11} @@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mcr p15, 0, r9, c1, c0, 1 @ auxillary control register + mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register mcr p15, 0, r10, c1, c0, 2 @ co-processor access control mcr p15, 0, ip, c2, c0, 2 @ TTB control register mcr p15, 0, ip, c7, c5, 4 @ ISB diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 262fa88..c35618e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index ce81481..4268a2b 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -13,7 +13,7 @@

/* * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controling CPU frequency. It allows you to change + * The CPUFREQ driver is for controlling CPU frequency. It allows you to change * the CPU clock speed on the fly. */

diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index bd9bb97..2e49e71 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -33,9 +33,9 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm

- @ this macro checks which interrupt occured + @ this macro checks which interrupt occurred @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat + @ and returns if an interrupt occurred in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 04c0d06..6bb96ef 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -24,7 +24,7 @@

struct mxc_nand_platform_data { unsigned int width; /* data bus width in bytes */ - unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ struct mtd_partition *parts; /* partition table */ int nr_parts; /* size of parts */ diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 7d9f815..ea28f98 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base); * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ec3b5d..c22217c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting + * is a chance for CSSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_src_pos(int lch) @@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting + * is a chance for CDSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_dst_pos(int lch) diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index d6f9fa0..cac2e8a 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void); /* Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. * * - * The original OMAP-specfic calls should eventually be removed. + * The original OMAP-specific calls should eventually be removed. */

#include <linux/errno.h> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 12b3161..1527929 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,7 +90,7 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at begining of spare area as romcode */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ };

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d598d9f..5587acf 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) /* resend */ return -1; } else { - /* wait for recieve confirmation */ + /* wait for receive confirmation */ int attemps = 0; while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { if (attemps++ > 1000) { diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 75f6564..89e68e0 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t; * * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which * represents a range of MFP pins from "start" to "end", with the offset - * begining at "offset", to define a single pin, let "end" = -1. + * beginning at "offset", to define a single pin, let "end" = -1. * * use * diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2064c3..0291bd6 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o

-# Architecture dependant builds +# Architecture dependent builds

obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index eea75ff..b3d3d02 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)

/* whilst we will be called later on, we try and re-set the * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediatley having to re-set + * up resuming devices and then immediately having to re-set * a number of settings once these devices have restarted. * * as a note, it is expected devices are not used until they diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 6ad274e..27ea852 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) break;

case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I belive in this case we do not have anything to do + /* I believe in this case we do not have anything to do * until the next buffer comes along, and we turn off the * reload */ return; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 46dd078..cd6d67c 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -208,7 +208,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) }

/* - * chained GPIO irq has been sucessfully registered, allocate new gpio + * chained GPIO irq has been successfully registered, allocate new gpio * int group and assign irq nubmers */

diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 9a82b88..983c578 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -21,7 +21,7 @@ struct clk; * @set_parent: set the clock's parent, see clk_set_parent(). * * Group the common clock implementations together so that we - * don't have to keep setting the same fiels again. We leave + * don't have to keep setting the same fields again. We leave * enable in struct clk. * * Adding an extra layer of indirection into the process should diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 5603db0..3ad8386 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of functions for diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 5e04fa6..1762dcb 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * These values control the state of the weak pull-{up,down} resistors * available on most pins on the S3C series. Not all chips support both - * up or down settings, and it may be dependant on the chip that is being + * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ #define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) @@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * @pull: The configuration for the pull resistor. * * This function sets the state of the pull-{up,down} resistor for the - * specified pin. It will return 0 if successfull, or a negative error + * specified pin. It will return 0 if successful, or a negative error * code if the pin cannot support the requested pull setting. * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. @@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); * @drvstr: The new value of the driver strength * * This function sets the driver strength value for the specified pin. - * It will return 0 if successfull, or a negative error code if the pin + * It will return 0 if successful, or a negative error code if the pin * cannot support the requested setting. */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index dac35d0..8cad4cf 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of function diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index b0bdf16..058e096 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -57,7 +57,7 @@ enum clk_types { * @cfg_gpio: Configure the GPIO for a specific card bit-width * @cfg_card: Configure the interface for a specific card and speed. This * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependant on + * changing of driver-strength and other controls dependent on * the card and speed of operation. * * Initialisation data specific to either the machine or the platform @@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;

-/* Helper function availablity */ +/* Helper function availability */

extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w); diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c index b4ff8d7..f85638c 100644 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -68,7 +68,7 @@ struct s3c_pl330_xfer { * @req: Two requests to communicate with the PL330 engine. * @callback_fn: Callback function to the client. * @rqcfg: Channel configuration for the xfers. - * @xfer_head: Pointer to the xfer to be next excecuted. + * @xfer_head: Pointer to the xfer to be next executed. * @dmac: Pointer to the DMAC that manages this channel, NULL if the * channel is available to be acquired. * @client: Client of this channel. NULL if the diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h index 2ae6606..fcc0d0a 100644 --- a/arch/arm/plat-spear/include/plat/clock.h +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -89,7 +89,7 @@ struct rate_config { * @sibling: node for list of clocks having same parents * @private_data: clock specific private data * @node: list to maintain clocks linearly - * @cl: clocklook up assoicated with this clock + * @cl: clocklook up associated with this clock * @dent: object for debugfs */ struct clk { diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index acb8379..2641731 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -59,7 +59,7 @@ config EXACT_HWERR be reported multiple cycles after the error happens. This delay can cause the wrong application, or even the kernel to receive a signal to be killed. If you are getting HW errors in your system, - try turning this on to ensure they are at least comming from the + try turning this on to ensure they are at least coming from the proper thread.

On production systems, it is safe (and a small optimization) to say N. diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 9fe0da6..70c4e51 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -57,7 +57,7 @@ #define HWC_x3(level) \ "External Memory Addressing Error\n" #define EXC_0x04(level) \ - "Unimplmented exception occured\n" \ + "Unimplmented exception occurred\n" \ level " - Maybe you forgot to install a custom exception handler?\n" #define HWC_x12(level) \ "Performance Monitor Overflow\n" diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index b8cfe34..9b80b15 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -181,7 +181,7 @@ static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) return -ENOSPC; }

- /* Becasue hardware data watchpoint impelemented in current + /* Because hardware data watchpoint impelemented in current * Blackfin can not trigger an exception event as the hardware * instrction watchpoint does, we ignaore all data watch point here. * They can be turned on easily after future blackfin design diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 59c1df7..655f25d 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -98,7 +98,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) /* send the appropriate signal to the user program */ switch (trapnr) {

- /* This table works in conjuction with the one in ./mach-common/entry.S + /* This table works in conjunction with the one in ./mach-common/entry.S * Some exceptions are handled there (in assembly, in exception space) * Some are handled here, (in C, in interrupt space) * Some, like CPLB, are handled in both, where the normal path is diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index 3edbd8d..79cacce 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -67,7 +67,7 @@ * - DMA version, which do not suffer from this issue. DMA versions have * different name (prefixed by dma_ ), and are located in * ../kernel/bfin_dma_5xx.c - * Using the dma related functions are recommended for transfering large + * Using the dma related functions are recommended for transferring large * buffers in/out of FIFOs. */

diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 80c240a..4eca566 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -60,7 +60,7 @@ ENTRY(_memmove) [P0++] = R1;

CC = P2 == 0; /* any remaining bytes? */ - P3 = I0; /* Ammend P3 to updated ptr. */ + P3 = I0; /* Amend P3 to updated ptr. */ IF !CC JUMP .Lbytes; P3 = I1; RTS; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 2c69785..3fa3354 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2530,7 +2530,7 @@ static struct resource bfin_pata_resources[] = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 0, }; -/* CompactFlash Storage Card Memory Mapped Adressing +/* CompactFlash Storage Card Memory Mapped Addressing * /REG = A11 = 1 */ static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 46ab457..f96933f 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -268,7 +268,7 @@ ENTRY(_handle_bad_cplb) /* To get here, we just tried and failed to change a CPLB * so, handle things in trap_c (C code), by lowering to * IRQ5, just like we normally do. Since this is not a - * "normal" return path, we have a do alot of stuff to + * "normal" return path, we have a do a lot of stuff to * the stack to get ready so, we can fall through - we * need to make a CPLB exception look like a normal exception */ @@ -817,7 +817,7 @@ _new_old_task: rets = [sp++];

/* - * When we come out of resume, r0 carries "old" task, becuase we are + * When we come out of resume, r0 carries "old" task, because we are * in "new" task. */ rts; diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 581e2b0..76de572 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -174,7 +174,7 @@ ENTRY(__start) sp.l = lo(KERNEL_CLOCK_STACK); sp.h = hi(KERNEL_CLOCK_STACK); call _init_clocks; - sp = usp; /* usp hasnt been touched, so restore from there */ + sp = usp; /* usp hasn't been touched, so restore from there */ #endif

/* This section keeps the processor in supervisor mode diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm index 517d1f0..67731d7 100644 --- a/arch/cris/arch-v10/README.mm +++ b/arch/cris/arch-v10/README.mm @@ -38,7 +38,7 @@ space. We also use it to keep the user-mode virtual mapping in the same map during kernel-mode, so that the kernel easily can access the corresponding user-mode process' data.

-As a comparision, the Linux/i386 2.0 puts the kernel and physical RAM at +As a comparison, the Linux/i386 2.0 puts the kernel and physical RAM at address 0, overlapping with the user-mode virtual space, so that descriptor registers are needed for each memory access to specify which MMU space to map through. That changed in 2.2, putting the kernel/physical RAM at diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 399dc1e..85026537 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -31,7 +31,7 @@ #include <asm/sync_serial.h> #include <arch/io_interface_mux.h>

-/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +/* The receiver is a bit tricky because of the continuous stream of data.*/ /* */ /* Three DMA descriptors are linked together. Each DMA descriptor is */ /* responsible for port->bufchunk of a common buffer. */ diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 3d75125..7b155f8 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -215,7 +215,7 @@ static struct mtd_partition main_partition = { }; #endif

-/* Auxilliary partition if we find another flash */ +/* Auxiliary partition if we find another flash */ static struct mtd_partition aux_partition = { .name = "aux", .size = 0, diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index 25d6f2b..f58f2c1 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -165,7 +165,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) /* Enable the following for a flash based bad block table */ /* this->options = NAND_USE_FLASH_BBT; */

- /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { err = -ENXIO; goto out_mtd; diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index c5a0f54..d5b0cc9 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -156,7 +156,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) /* Enable the following for a flash based bad block table */ /* this->options = NAND_USE_FLASH_BBT; */

- /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index c8637a9..a6a180bc 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -33,7 +33,7 @@ #include <asm/sync_serial.h>

-/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +/* The receiver is a bit tricky because of the continuous stream of data.*/ /* */ /* Three DMA descriptors are linked together. Each DMA descriptor is */ /* responsible for port->bufchunk of a common buffer. */ diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 0ecb50b..3abf12c 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -182,7 +182,7 @@ _syscall_traced: move.d $r0, [$sp]

;; The registers carrying parameters (R10-R13) are intact. The optional - ;; fifth and sixth parameters is in MOF and SRP respectivly. Put them + ;; fifth and sixth parameters is in MOF and SRP respectively. Put them ;; back on the stack. subq 4, $sp move $srp, [$sp] diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index 8023176..68a1a59 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -374,7 +374,7 @@ crisv32_do_multiple(struct pt_regs* regs) irq_enter();

for (i = 0; i < NBR_REGS; i++) { - /* Get which IRQs that happend. */ + /* Get which IRQs that happened. */ masked[i] = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], r_masked_vect, i);

diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index 6b65332..c0343c3 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -925,7 +925,7 @@ stub_is_stopped(int sigval)

if (reg.eda >= bp_d_regs[bp * 2] && reg.eda <= bp_d_regs[bp * 2 + 1]) { - /* EDA withing range for this BP; it must be the one + /* EDA within range for this BP; it must be the one we're looking for. */ stopped_data_address = reg.eda; break; diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c index 562f847..0570e8c 100644 --- a/arch/cris/arch-v32/kernel/process.c +++ b/arch/cris/arch-v32/kernel/process.c @@ -149,7 +149,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, childregs->r10 = 0; /* Child returns 0 after a fork/clone. */

/* Set a new TLS ? - * The TLS is in $mof beacuse it is the 5th argument to sys_clone. + * The TLS is in $mof because it is the 5th argument to sys_clone. */ if (p->mm && (clone_flags & CLONE_SETTLS)) { task_thread_info(p)->tls = regs->mof; diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index b3a05ae..ce4ab1a 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -610,7 +610,7 @@ ugdb_trap_user(struct thread_info *ti, int sig) user_regs(ti)->spc = 0; } /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA - not withing any configured h/w breakpoint range). Synchronize with + not within any configured h/w breakpoint range). Synchronize with what already exists for kernel debugging. */ if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) { /* Break 8: subtract 2 from ERP unless in a delay slot. */ diff --git a/arch/cris/arch-v32/mach-a3/arbiter.c b/arch/cris/arch-v32/mach-a3/arbiter.c index 8b924db..15f5c9d 100644 --- a/arch/cris/arch-v32/mach-a3/arbiter.c +++ b/arch/cris/arch-v32/mach-a3/arbiter.c @@ -568,7 +568,7 @@ crisv32_foo_arbiter_irq(int irq, void *dev_id) REG_WR(marb_foo_bp, watch->instance, rw_ack, ack); REG_WR(marb_foo, regi_marb_foo, rw_ack_intr, ack_intr);

- printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()); + printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs());

if (watch->cb) watch->cb(); @@ -624,7 +624,7 @@ crisv32_bar_arbiter_irq(int irq, void *dev_id) REG_WR(marb_bar_bp, watch->instance, rw_ack, ack); REG_WR(marb_bar, regi_marb_bar, rw_ack_intr, ack_intr);

- printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()->erp); + printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()->erp);

if (watch->cb) watch->cb(); diff --git a/arch/cris/arch-v32/mach-fs/arbiter.c b/arch/cris/arch-v32/mach-fs/arbiter.c index 82ef293..3f8ebb5 100644 --- a/arch/cris/arch-v32/mach-fs/arbiter.c +++ b/arch/cris/arch-v32/mach-fs/arbiter.c @@ -395,7 +395,7 @@ static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id) REG_WR(marb_bp, watch->instance, rw_ack, ack); REG_WR(marb, regi_marb, rw_ack_intr, ack_intr);

- printk(KERN_INFO "IRQ occured at %lX\n", get_irq_regs()->erp); + printk(KERN_INFO "IRQ occurred at %lX\n", get_irq_regs()->erp);

if (watch->cb) watch->cb(); diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S index 2fafe24..af55df0 100644 --- a/arch/cris/boot/rescue/head_v10.S +++ b/arch/cris/boot/rescue/head_v10.S @@ -7,7 +7,7 @@ * for each partition that this code should check. * * If any of the checksums fail, we assume the flash is so - * corrupt that we cant use it to boot into the ftp flash + * corrupt that we can't use it to boot into the ftp flash * loader, and instead we initialize the serial port to * receive a flash-loader and new flash image. we dont include * any flash code here, but just accept a certain amount of diff --git a/arch/cris/include/arch-v32/arch/hwregs/Makefile b/arch/cris/include/arch-v32/arch/hwregs/Makefile index f9a05d2..b8b3f8d 100644 --- a/arch/cris/include/arch-v32/arch/hwregs/Makefile +++ b/arch/cris/include/arch-v32/arch/hwregs/Makefile @@ -1,6 +1,6 @@ # Makefile to generate or copy the latest register definitions # and related datastructures and helpermacros. -# The offical place for these files is at: +# The official place for these files is at: RELEASE ?= r1_alfa5 OFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/

diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile index a90056a..0747a22 100644 --- a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile @@ -1,7 +1,7 @@ # $Id: Makefile,v 1.3 2004/01/07 20:34:55 johana Exp $ # Makefile to generate or copy the latest register definitions # and related datastructures and helpermacros. -# The offical place for these files is probably at: +# The official place for these files is probably at: RELEASE ?= r1_alfa5 IOPOFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/

diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h index 9eaae21..7df4301 100644 --- a/arch/cris/include/asm/pgtable.h +++ b/arch/cris/include/asm/pgtable.h @@ -97,7 +97,7 @@ extern unsigned long empty_zero_page; #define pte_clear(mm,addr,xp) do { pte_val(*(xp)) = 0; } while (0)

#define pmd_none(x) (!pmd_val(x)) -/* by removing the _PAGE_KERNEL bit from the comparision, the same pmd_bad +/* by removing the _PAGE_KERNEL bit from the comparison, the same pmd_bad * works for both _PAGE_TABLE and _KERNPG_TABLE pmd entries. */ #define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_KERNEL)) != _PAGE_TABLE) diff --git a/arch/cris/kernel/traps.c b/arch/cris/kernel/traps.c index 541efbf0..8da53f3 100644 --- a/arch/cris/kernel/traps.c +++ b/arch/cris/kernel/traps.c @@ -183,7 +183,7 @@ __initcall(oops_nmi_register);

/* * This gets called from entry.S when the watchdog has bitten. Show something - * similiar to an Oops dump, and if the kernel is configured to be a nice + * similar to an Oops dump, and if the kernel is configured to be a nice * doggy, then halt instead of reboot. */ void diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h index 0d59979..ef03baf 100644 --- a/arch/frv/include/asm/pci.h +++ b/arch/frv/include/asm/pci.h @@ -54,7 +54,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, #endif

/* - * These are pretty much arbitary with the CoMEM implementation. + * These are pretty much arbitrary with the CoMEM implementation. * We have the whole address space to ourselves. */ #define PCIBIOS_MIN_IO 0x100 diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h index 01e6af5..d388302 100644 --- a/arch/frv/include/asm/spr-regs.h +++ b/arch/frv/include/asm/spr-regs.h @@ -274,7 +274,7 @@ #define MSR0_RD 0xc0000000 /* rounding mode */ #define MSR0_RD_NEAREST 0x00000000 /* - nearest */ #define MSR0_RD_ZERO 0x40000000 /* - zero */ -#define MSR0_RD_POS_INF 0x80000000 /* - postive infinity */ +#define MSR0_RD_POS_INF 0x80000000 /* - positive infinity */ #define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */

/* diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h index 59788fa..b26d70a 100644 --- a/arch/frv/include/asm/virtconvert.h +++ b/arch/frv/include/asm/virtconvert.h @@ -1,4 +1,4 @@ -/* virtconvert.h: virtual/physical/page address convertion +/* virtconvert.h: virtual/physical/page address conversion * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S index bf35f33..06c5ae1 100644 --- a/arch/frv/kernel/entry-table.S +++ b/arch/frv/kernel/entry-table.S @@ -86,7 +86,7 @@ __break_usertrap_fixup_table: .globl __break_kerneltrap_fixup_table __break_kerneltrap_fixup_table:

- # handler declaration for a sofware or program interrupt + # handler declaration for a software or program interrupt .macro VECTOR_SOFTPROG tbr_tt, vec .section .trap.user .org \tbr_tt @@ -145,7 +145,7 @@ __break_kerneltrap_fixup_table: .long \vec .endm

- # handler declaration for an MMU only sofware or program interrupt + # handler declaration for an MMU only software or program interrupt .macro VECTOR_SP_MMU tbr_tt, vec #ifdef CONFIG_MMU VECTOR_SOFTPROG \tbr_tt, \vec diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index c4ea092..e5cc56a 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -414,11 +414,11 @@ config PERMIT_BSP_REMOVE support.

config FORCE_CPEI_RETARGET - bool "Force assumption that CPEI can be re-targetted" + bool "Force assumption that CPEI can be re-targeted" depends on PERMIT_BSP_REMOVE default n ---help--- - Say Y if you need to force the assumption that CPEI can be re-targetted to + Say Y if you need to force the assumption that CPEI can be re-targeted to any cpu in the system. This hint is available via ACPI 3.0 specifications. Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP. This option it useful to enable this feature on older BIOS's as well. diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h index 6a29250..2e69284 100644 --- a/arch/ia64/include/asm/pal.h +++ b/arch/ia64/include/asm/pal.h @@ -1669,7 +1669,7 @@ typedef union pal_vp_info_u { } pal_vp_info_u_t;

/* - * Returns infomation about virtual processor features + * Returns information about virtual processor features */ static inline s64 ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id) diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h index 74724b2..a2d560c 100644 --- a/arch/ia64/include/asm/perfmon_default_smpl.h +++ b/arch/ia64/include/asm/perfmon_default_smpl.h @@ -67,8 +67,8 @@ typedef struct { unsigned long ip; /* where did the overflow interrupt happened */ unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */

- unsigned short cpu; /* cpu on which the overflow occured */ - unsigned short set; /* event set active when overflow ocurred */ + unsigned short cpu; /* cpu on which the overflow occurred */ + unsigned short set; /* event set active when overflow occurred */ int tgid; /* thread group id (for NPTL, this is getpid()) */ } pfm_default_smpl_entry_t;

diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h index 96798d2..cc6c4db 100644 --- a/arch/ia64/include/asm/sn/bte.h +++ b/arch/ia64/include/asm/sn/bte.h @@ -216,7 +216,7 @@ extern void bte_error_handler(unsigned long); bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)

/* - * The following is the prefered way of calling bte_unaligned_copy + * The following is the preferred way of calling bte_unaligned_copy * If the copy is fully cache line aligned, then bte_copy is * used instead. Since bte_copy is inlined, this saves a call * stack. NOTE: bte_copy is called synchronously and does block diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h index 7de1d1d..a84d870 100644 --- a/arch/ia64/include/asm/sn/shub_mmr.h +++ b/arch/ia64/include/asm/sn/shub_mmr.h @@ -459,7 +459,7 @@ /* ==================================================================== */ /* Some MMRs are functionally identical (or close enough) on both SHUB1 */ /* and SHUB2 that it makes sense to define a geberic name for the MMR. */ -/* It is acceptible to use (for example) SH_IPI_INT to reference the */ +/* It is acceptable to use (for example) SH_IPI_INT to reference the */ /* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */ /* on the type of the SHUB. Do not use these #defines in performance */ /* critical code or loops - there is a small performance penalty. */ diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h index 6052422..ecb8a49 100644 --- a/arch/ia64/include/asm/sn/shubio.h +++ b/arch/ia64/include/asm/sn/shubio.h @@ -1383,7 +1383,7 @@ typedef union ii_ibcr_u { * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The * * errant header is thereby captured, and no further spurious read * * respones are captured until IXSS[VALID] is cleared by setting the * - * appropriate bit in IECLR.Everytime a spurious read response is * + * appropriate bit in IECLR. Every time a spurious read response is * * detected, the SPUR_RD bit of the PRB corresponding to the incoming * * message's SIDN field is set. This always happens, regarless of * * whether a header is captured. The programmer should check * @@ -2738,7 +2738,7 @@ typedef union ii_ippr_u { /************************************************************************ * * * The following defines which were not formed into structures are * - * probably indentical to another register, and the name of the * + * probably identical to another register, and the name of the * * register is provided against each of these registers. This * * information needs to be checked carefully * * * diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index d52f1f7..1b811c6 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -31,7 +31,7 @@ static struct clocksource clocksource_cyclone = { .rating = 300, .read = read_cyclone, .mask = (1LL << 40) - 1, - .mult = 0, /*to be caluclated*/ + .mult = 0, /*to be calculated*/ .shift = 16, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; diff --git a/arch/ia64/kernel/perfmon_default_smpl.c b/arch/ia64/kernel/perfmon_default_smpl.c index 5f637bb..30c644e 100644 --- a/arch/ia64/kernel/perfmon_default_smpl.c +++ b/arch/ia64/kernel/perfmon_default_smpl.c @@ -150,7 +150,7 @@ default_handler(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct * current = task running at the time of the overflow. * * per-task mode: - * - this is ususally the task being monitored. + * - this is usually the task being monitored. * Under certain conditions, it might be a different task * * system-wide: diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 44f11ee..14ec641 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -703,7 +703,7 @@ int migrate_platform_irqs(unsigned int cpu) data->chip->irq_disable(data); data->chip->irq_set_affinity(data, mask, false); data->chip->irq_enable(data); - printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu); + printk ("Re-targeting CPEI to cpu %d\n", new_cpei_cpu); } } if (!data) { diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 0baa1bb..0e0e0cc 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -43,7 +43,7 @@ int __ref arch_register_cpu(int num) { #ifdef CONFIG_ACPI /* - * If CPEI can be re-targetted or if this is not + * If CPEI can be re-targeted or if this is not * CPEI target, then it is hotpluggable */ if (can_cpei_retarget() || !is_cpu_cpei_target(num)) diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c index bb862fb..b039874 100644 --- a/arch/ia64/kvm/process.c +++ b/arch/ia64/kvm/process.c @@ -987,7 +987,7 @@ static void vmm_sanity_check(struct kvm_vcpu *vcpu)

static void kvm_do_resume_op(struct kvm_vcpu *vcpu) { - vmm_sanity_check(vcpu); /*Guarantee vcpu runing on healthy vmm!*/ + vmm_sanity_check(vcpu); /*Guarantee vcpu running on healthy vmm!*/

if (test_and_clear_bit(KVM_REQ_RESUME, &vcpu->requests)) { vcpu_do_resume(vcpu); diff --git a/arch/ia64/lib/do_csum.S b/arch/ia64/lib/do_csum.S index 6bec2fc..1a431a5 100644 --- a/arch/ia64/lib/do_csum.S +++ b/arch/ia64/lib/do_csum.S @@ -201,7 +201,7 @@ GLOBAL_ENTRY(do_csum) ;; (p6) adds result1[0]=1,result1[0] (p9) br.cond.sptk .do_csum_exit // if (count == 1) exit - // Fall through to caluculate the checksum, feeding result1[0] as + // Fall through to calculate the checksum, feeding result1[0] as // the initial value in result1[0]. // // Calculate the checksum loading two 8-byte words per loop. diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 7f399f9..1c50e4c 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -227,7 +227,7 @@ void sn_set_err_irq_affinity(unsigned int irq) { /* * On systems which support CPU disabling (SHub2), all error interrupts - * are targetted at the boot CPU. + * are targeted at the boot CPU. */ if (is_shub2() && sn_prom_feature_available(PRF_CPU_DISABLE_SUPPORT)) set_irq_affinity_info(irq, cpu_physical_id(0), 0); @@ -435,7 +435,7 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) /* * Bridge types attached to TIO (anything but PIC) do not need this WAR * since they do not target Shub II interrupt registers. If that - * ever changes, this check needs to accomodate. + * ever changes, this check needs to accommodate. */ if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_PIC) return; diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index c659ad5..33def66 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -227,7 +227,7 @@ pcibr_dma_unmap(struct pci_dev *hwdev, dma_addr_t dma_handle, int direction) * after doing the read. For PIC this routine then forces a fake interrupt * on another line, which is logically associated with the slot that the PIO * is addressed to. It then spins while watching the memory location that - * the interrupt is targetted to. When the interrupt response arrives, we + * the interrupt is targeted to. When the interrupt response arrives, we * are sure that the DMA has landed in memory and it is safe for the driver * to proceed. For TIOCP use the Device(x) Write Request Buffer Flush * Bridge register since it ensures the data has entered the coherence domain, diff --git a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h index 2dc89d6..1feae97 100644 --- a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h +++ b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h @@ -4,7 +4,7 @@ /* * include/asm-m32r/m32104ut/m32104ut_pld.h * - * Definitions for Programable Logic Device(PLD) on M32104UT board. + * Definitions for Programmable Logic Device(PLD) on M32104UT board. * Based on m32700ut_pld.h * * Copyright (c) 2002 Takeo Takahashi diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h index 57623be..3529467 100644 --- a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h +++ b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h @@ -4,7 +4,7 @@ /* * include/asm-m32r/m32700ut/m32700ut_pld.h * - * Definitions for Programable Logic Device(PLD) on M32700UT board. + * Definitions for Programmable Logic Device(PLD) on M32700UT board. * * Copyright (c) 2002 Takeo Takahashi * diff --git a/arch/m32r/include/asm/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h index 3f11ea1..6901401 100644 --- a/arch/m32r/include/asm/opsput/opsput_pld.h +++ b/arch/m32r/include/asm/opsput/opsput_pld.h @@ -4,7 +4,7 @@ /* * include/asm-m32r/opsput/opsput_pld.h * - * Definitions for Programable Logic Device(PLD) on OPSPUT board. + * Definitions for Programmable Logic Device(PLD) on OPSPUT board. * * Copyright (c) 2002 Takeo Takahashi * diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h index bca3475..9cdaf73 100644 --- a/arch/m32r/include/asm/pgtable-2level.h +++ b/arch/m32r/include/asm/pgtable-2level.h @@ -44,7 +44,7 @@ static inline int pgd_present(pgd_t pgd) { return 1; } #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)

/* - * (pmds are folded into pgds so this doesnt get actually called, + * (pmds are folded into pgds so this doesn't get actually called, * but the define is needed for a generic inline function.) */ #define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index b8ec002..2c9aeb4 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -120,7 +120,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,

/* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the - * kernel and should generate an OOPS. Unfortunatly, in the case of an + * kernel and should generate an OOPS. Unfortunately, in the case of an * erroneous fault occurring in a code path which already holds mmap_sem * we will deadlock attempting to validate the fault against the * address space. Luckily the kernel only validly references user @@ -128,7 +128,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code, * exceptions table. * * As the vast majority of faults will be valid we will only perform - * the source reference check when there is a possibilty of a deadlock. + * the source reference check when there is a possibility of a deadlock. * Attempt to lock the address space, if we cannot we then validate the * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c index 5890897..b995513 100644 --- a/arch/m68k/atari/atakeyb.c +++ b/arch/m68k/atari/atakeyb.c @@ -130,7 +130,7 @@ KEYBOARD_STATE kb_state; * it's really hard to decide whether they're mouse or keyboard bytes. Since * overruns usually occur when moving the Atari mouse rapidly, they're seen as * mouse bytes here. If this is wrong, only a make code of the keyboard gets - * lost, which isn't too bad. Loosing a break code would be disastrous, + * lost, which isn't too bad. Losing a break code would be disastrous, * because then the keyboard repeat strikes... */

diff --git a/arch/m68k/fpsp040/bindec.S b/arch/m68k/fpsp040/bindec.S index 72f1159..f2e7952 100644 --- a/arch/m68k/fpsp040/bindec.S +++ b/arch/m68k/fpsp040/bindec.S @@ -609,7 +609,7 @@ do_fint: | A6. This test occurs only on the first pass. If the | result is exactly 10^LEN, decrement ILOG and divide | the mantissa by 10. The calculation of 10^LEN cannot -| be inexact, since all powers of ten upto 10^27 are exact +| be inexact, since all powers of ten up to 10^27 are exact | in extended precision, so the use of a previous power-of-ten | table will introduce no error. | diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 26e85e2..78cb60f 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -11813,7 +11813,7 @@ fmul_unfl_ena: bne.b fmul_unfl_ena_sd # no, sgl or dbl

# if the rnd mode is anything but RZ, then we have to re-do the above -# multiplication becuase we used RZ for all. +# multiplication because we used RZ for all. fmov.l L_SCR3(%a6),%fpcr # set FPCR

fmul_unfl_ena_cont: @@ -18095,7 +18095,7 @@ fscc_mem_op:

rts

-# addresing mode is post-increment. write the result byte. if the write +# addressing mode is post-increment. write the result byte. if the write # fails then don't update the address register. if write passes then # call inc_areg() to update the address register. fscc_mem_inc: @@ -20876,7 +20876,7 @@ dst_get_dupper: swap %d0 # d0 now in upper word lsl.l &0x4,%d0 # d0 in proper place for dbl prec exp tst.b FTEMP_EX(%a0) # test sign - bpl.b dst_get_dman # if postive, go process mantissa + bpl.b dst_get_dman # if positive, go process mantissa bset &0x1f,%d0 # if negative, set sign dst_get_dman: mov.l FTEMP_HI(%a0),%d1 # get ms mantissa @@ -22943,7 +22943,7 @@ tbl_ovfl_result: # FP_SRC(a6) = packed operand now as a binary FP number # # # # ALGORITHM *********************************************************** # -# Get the correct <ea> whihc is the value on the exception stack # +# Get the correct <ea> which is the value on the exception stack # # frame w/ maybe a correction factor if the <ea> is -(an) or (an)+. # # Then, fetch the operand from memory. If the fetch fails, exit # # through facc_in_x(). # @@ -24096,7 +24096,7 @@ do_fint12: # A6. This test occurs only on the first pass. If the # result is exactly 10^LEN, decrement ILOG and divide # the mantissa by 10. The calculation of 10^LEN cannot -# be inexact, since all powers of ten upto 10^27 are exact +# be inexact, since all powers of ten up to 10^27 are exact # in extended precision, so the use of a previous power-of-ten # table will introduce no error. # diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index e71ba0a..4aedef9 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -7777,7 +7777,7 @@ dst_get_dupper: swap %d0 # d0 now in upper word lsl.l &0x4,%d0 # d0 in proper place for dbl prec exp tst.b FTEMP_EX(%a0) # test sign - bpl.b dst_get_dman # if postive, go process mantissa + bpl.b dst_get_dman # if positive, go process mantissa bset &0x1f,%d0 # if negative, set sign dst_get_dman: mov.l FTEMP_HI(%a0),%d1 # get ms mantissa @@ -8244,7 +8244,7 @@ fmul_unfl_ena: bne.b fmul_unfl_ena_sd # no, sgl or dbl

# if the rnd mode is anything but RZ, then we have to re-do the above -# multiplication becuase we used RZ for all. +# multiplication because we used RZ for all. fmov.l L_SCR3(%a6),%fpcr # set FPCR

fmul_unfl_ena_cont: @@ -12903,7 +12903,7 @@ store_fpreg_7: # FP_SRC(a6) = packed operand now as a binary FP number # # # # ALGORITHM *********************************************************** # -# Get the correct <ea> whihc is the value on the exception stack # +# Get the correct <ea> which is the value on the exception stack # # frame w/ maybe a correction factor if the <ea> is -(an) or (an)+. # # Then, fetch the operand from memory. If the fetch fails, exit # # through facc_in_x(). # @@ -14056,7 +14056,7 @@ do_fint12: # A6. This test occurs only on the first pass. If the # result is exactly 10^LEN, decrement ILOG and divide # the mantissa by 10. The calculation of 10^LEN cannot -# be inexact, since all powers of ten upto 10^27 are exact +# be inexact, since all powers of ten up to 10^27 are exact # in extended precision, so the use of a previous power-of-ten # table will introduce no error. # diff --git a/arch/m68k/include/asm/atariints.h b/arch/m68k/include/asm/atariints.h index f597892..656bbbf 100644 --- a/arch/m68k/include/asm/atariints.h +++ b/arch/m68k/include/asm/atariints.h @@ -146,7 +146,7 @@ static inline void clear_mfp_bit( unsigned irq, int type )

/* * {en,dis}able_irq have the usual semantics of temporary blocking the - * interrupt, but not loosing requests that happen between disabling and + * interrupt, but not losing requests that happen between disabling and * enabling. This is done with the MFP mask registers. */

diff --git a/arch/m68k/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h index bdc1a4a..e518f5a 100644 --- a/arch/m68k/include/asm/bootstd.h +++ b/arch/m68k/include/asm/bootstd.h @@ -31,7 +31,7 @@ #define __BN_flash_write_range 20

/* Calling conventions compatible to (uC)linux/68k - * We use simmilar macros to call into the bootloader as for uClinux + * We use similar macros to call into the bootloader as for uClinux */

#define __bsc_return(type, res) \ diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h index edf5eb6..a739985 100644 --- a/arch/m68k/include/asm/commproc.h +++ b/arch/m68k/include/asm/commproc.h @@ -88,7 +88,7 @@ typedef struct cpm_buf_desc {

/* rx bd status/control bits */ -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ #define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ @@ -96,7 +96,7 @@ typedef struct cpm_buf_desc { #define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ #define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */

-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */ #define BD_SC_ID ((ushort)0x0100) /* Received too many idles */

#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ diff --git a/arch/m68k/include/asm/delay_no.h b/arch/m68k/include/asm/delay_no.h index 55cbd62..c3a0edc 100644 --- a/arch/m68k/include/asm/delay_no.h +++ b/arch/m68k/include/asm/delay_no.h @@ -16,7 +16,7 @@ static inline void __delay(unsigned long loops) * long word alignment which is the faster version. * The 0x4a8e is of course a 'tstl %fp' instruction. This is better * than using a NOP (0x4e71) instruction because it executes in one - * cycle not three and doesn't allow for an arbitary delay waiting + * cycle not three and doesn't allow for an arbitrary delay waiting * for bus cycles to finish. Also fp/a6 isn't likely to cause a * stall waiting for the register to become valid if such is added * to the coldfire at some stage. diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index c64c7b7..b204683 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -31,7 +31,7 @@ * GPIOs in a single control area, others have some GPIOs implemented in * different modules. * - * This implementation attempts accomodate the differences while presenting + * This implementation attempts accommodate the differences while presenting * a generic interface that will optimize to as few instructions as possible. */ #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index 55d5a4c5..b6bf2c5 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -157,7 +157,7 @@ #define MCFFEC_SIZE 0x800 /* Register set size */

/* - * Reset Controll Unit. + * Reset Control Unit. */ #define MCF_RCR 0xFC0A0000 #define MCF_RSR 0xFC0A0001 diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 8996df6..6235921 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -48,7 +48,7 @@ #define MCFSIM_DMR1 (MCF_IPSBAR + 0x54) /* Address mask 1 */

/* - * Reset Controll Unit (relative to IPSBAR). + * Reset Control Unit (relative to IPSBAR). */ #define MCF_RCR 0x110000 #define MCF_RSR 0x110001 diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 74855a6..758810e 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -283,7 +283,7 @@ #endif

/* - * Reset Controll Unit (relative to IPSBAR). + * Reset Control Unit (relative to IPSBAR). */ #define MCF_RCR 0x110000 #define MCF_RSR 0x110001 diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 4c94c01..8f8609f 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -29,7 +29,7 @@ #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ #define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ #define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_PLLCR 0x08 /* PLL Control Reg*/ #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index 762c58c..51e00b0 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -29,7 +29,7 @@ #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ #define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ #define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_PLLCR 0x08 /* PLL Control Reg*/ #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ diff --git a/arch/m68k/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h index 6d40f4d..59414cc 100644 --- a/arch/m68k/include/asm/m68360_quicc.h +++ b/arch/m68k/include/asm/m68360_quicc.h @@ -32,7 +32,7 @@ struct user_data { /* BASE + 0x000: user data memory */ volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ volatile unsigned char udata_bd[0x200]; /*user data Ucode */ - volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ + volatile unsigned char ucode_ext[0x100]; /*Ucode Extension ram */ volatile unsigned char RESERVED1[0x500]; /* Reserved area */ }; #else diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h index 7221f72..3cf2b6e 100644 --- a/arch/m68k/include/asm/mac_oss.h +++ b/arch/m68k/include/asm/mac_oss.h @@ -61,7 +61,7 @@ /* * OSS Interrupt levels for various sub-systems * - * This mapping is layed out with two things in mind: first, we try to keep + * This mapping is laid out with two things in mind: first, we try to keep * things on their own levels to avoid having to do double-dispatches. Second, * the levels match as closely as possible the alternate IRQ mapping mode (aka * "A/UX mode") available on some VIA machines. diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h index 39afb43..a59665e 100644 --- a/arch/m68k/include/asm/mac_via.h +++ b/arch/m68k/include/asm/mac_via.h @@ -204,7 +204,7 @@ #define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ #define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ #define vSR 0x1400 /* [VIA only] Shift register. */ -#define vACR 0x1600 /* [VIA only] Auxilary control register. */ +#define vACR 0x1600 /* [VIA only] Auxiliary control register. */ #define vPCR 0x1800 /* [VIA only] Peripheral control register. */ /* CHRP sez never ever to *write* this. * Mac family says never to *change* this. diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index 50db359..c2a1c5e 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -14,7 +14,7 @@ extern void mac_init_IRQ(void); extern int mac_irq_pending(unsigned int);

/* - * Floppy driver magic hook - probably shouldnt be here + * Floppy driver magic hook - probably shouldn't be here */

extern void via1_set_head(int); diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h index 92b276f..351c272 100644 --- a/arch/m68k/include/asm/mcftimer.h +++ b/arch/m68k/include/asm/mcftimer.h @@ -27,7 +27,7 @@

/* * Bit definitions for the Timer Mode Register (TMR). - * Register bit flags are common accross ColdFires. + * Register bit flags are common across ColdFires. */ #define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ #define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index ef54128..27622b3 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -134,7 +134,7 @@ * Thanks to a small helping routine enabling the mmu got quite simple * and there is only one way left. mmu_engage makes a complete a new mapping * that only includes the absolute necessary to be able to jump to the final - * postion and to restore the original mapping. + * position and to restore the original mapping. * As this code doesn't need a transparent translation register anymore this * means all registers are free to be used by machines that needs them for * other purposes. @@ -969,7 +969,7 @@ L(mmu_init_amiga): is_not_040_or_060(1f)

/* - * 040: Map the 16Meg range physical 0x0 upto logical 0x8000.0000 + * 040: Map the 16Meg range physical 0x0 up to logical 0x8000.0000 */ mmu_map #0x80000000,#0,#0x01000000,#_PAGE_NOCACHE_S /* @@ -982,7 +982,7 @@ L(mmu_init_amiga):

1: /* - * 030: Map the 32Meg range physical 0x0 upto logical 0x8000.0000 + * 030: Map the 32Meg range physical 0x0 up to logical 0x8000.0000 */ mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030 mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE030 @@ -1074,7 +1074,7 @@ L(notq40): is_040(1f)

/* - * 030: Map the 32Meg range physical 0x0 upto logical 0xf000.0000 + * 030: Map the 32Meg range physical 0x0 up to logical 0xf000.0000 */ mmu_map #0xf0000000,#0,#0x02000000,#_PAGE_NOCACHE030

@@ -1082,7 +1082,7 @@ L(notq40):

1: /* - * 040: Map the 16Meg range physical 0x0 upto logical 0xf000.0000 + * 040: Map the 16Meg range physical 0x0 up to logical 0xf000.0000 */ mmu_map #0xf0000000,#0,#0x01000000,#_PAGE_NOCACHE_S

@@ -3078,7 +3078,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1 /* * If the loader gave us a board type then we can use that to * select an appropriate output routine; otherwise we just use - * the Bug code. If we haev to use the Bug that means the Bug + * the Bug code. If we have to use the Bug that means the Bug * workspace has to be valid, which means the Bug has to use * the SRAM, which is non-standard. */ diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux.lds_no.S index 47e15eb..f4d715c 100644 --- a/arch/m68k/kernel/vmlinux.lds_no.S +++ b/arch/m68k/kernel/vmlinux.lds_no.S @@ -3,7 +3,7 @@ * * (C) Copyright 2002-2006, Greg Ungerer gerg@snapgear.com * - * This linker script is equiped to build either ROM loaded or RAM + * This linker script is equipped to build either ROM loaded or RAM * run kernels. */

diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c index 418a76f..71f4436 100644 --- a/arch/m68k/platform/523x/config.c +++ b/arch/m68k/platform/523x/config.c @@ -3,7 +3,7 @@ /* * linux/arch/m68knommu/platform/523x/config.c * - * Sub-architcture dependant initialization code for the Freescale + * Sub-architcture dependent initialization code for the Freescale * 523x CPUs. * * Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com) diff --git a/arch/m68k/platform/5272/intc.c b/arch/m68k/platform/5272/intc.c index 43e6e96..7e715df 100644 --- a/arch/m68k/platform/5272/intc.c +++ b/arch/m68k/platform/5272/intc.c @@ -33,7 +33,7 @@ * * Note that the external interrupts are edge triggered (unlike the * internal interrupt sources which are level triggered). Which means - * they also need acknowledgeing via acknowledge bits. + * they also need acknowledging via acknowledge bits. */ struct irqmap { unsigned char icr; diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c index fa35959..3ebc769 100644 --- a/arch/m68k/platform/527x/config.c +++ b/arch/m68k/platform/527x/config.c @@ -3,7 +3,7 @@ /* * linux/arch/m68knommu/platform/527x/config.c * - * Sub-architcture dependant initialization code for the Freescale + * Sub-architcture dependent initialization code for the Freescale * 5270/5271 CPUs. * * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c index ac39fc6..7abe77a 100644 --- a/arch/m68k/platform/528x/config.c +++ b/arch/m68k/platform/528x/config.c @@ -3,7 +3,7 @@ /* * linux/arch/m68knommu/platform/528x/config.c * - * Sub-architcture dependant initialization code for the Freescale + * Sub-architcture dependent initialization code for the Freescale * 5280, 5281 and 5282 CPUs. * * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) diff --git a/arch/m68k/platform/coldfire/cache.c b/arch/m68k/platform/coldfire/cache.c index 235d3c4..71beeaf 100644 --- a/arch/m68k/platform/coldfire/cache.c +++ b/arch/m68k/platform/coldfire/cache.c @@ -1,7 +1,7 @@ /***************************************************************************/

/* - * cache.c -- general ColdFire Cache maintainence code + * cache.c -- general ColdFire Cache maintenance code * * Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com) */ diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 5837cf0..eab63f0 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -163,7 +163,7 @@ Lsignal_return:

/* * This is the generic interrupt handler (for all hardware interrupt - * sources). Calls upto high level code to do all the work. + * sources). Calls up to high level code to do all the work. */ ENTRY(inthandler) SAVE_ALL diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index 129bff49..6ae91a4 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -20,7 +20,7 @@

/* * If we don't have a fixed memory size, then lets build in code - * to auto detect the DRAM size. Obviously this is the prefered + * to auto detect the DRAM size. Obviously this is the preferred * method, and should work for most boards. It won't work for those * that do not have their RAM starting at address 0, and it only * works on SDRAM (not boards fitted with SRAM). diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c index c28a6ed..0bbb414 100644 --- a/arch/m68k/platform/coldfire/intc.c +++ b/arch/m68k/platform/coldfire/intc.c @@ -37,7 +37,7 @@ unsigned char mcf_irq2imr[NR_IRQS]; /* * In the early version 2 core ColdFire parts the IMR register was 16 bits * in size. Version 3 (and later version 2) core parts have a 32 bit - * sized IMR register. Provide some size independant methods to access the + * sized IMR register. Provide some size independent methods to access the * IMR register. */ #ifdef MCFSIM_IMR_IS_16BITS diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c index 0a1b937..6a85daf 100644 --- a/arch/m68k/platform/coldfire/sltimers.c +++ b/arch/m68k/platform/coldfire/sltimers.c @@ -106,7 +106,7 @@ static cycle_t mcfslt_read_clk(struct clocksource *cs) cycles = mcfslt_cnt; local_irq_restore(flags);

- /* substract because slice timers count down */ + /* subtract because slice timers count down */ return cycles - scnt; }

diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README index f877b72..b26d5f5 100644 --- a/arch/m68k/q40/README +++ b/arch/m68k/q40/README @@ -89,7 +89,7 @@ The main interrupt register IIRQ_REG will indicate whether an IRQ was internal or from some ISA devices, EIRQ_REG can distinguish up to 8 ISA IRQs.

The Q40 custom chip is programmable to provide 2 periodic timers: - - 50 or 200 Hz - level 2, !!THIS CANT BE DISABLED!! + - 50 or 200 Hz - level 2, !!THIS CAN'T BE DISABLED!! - 10 or 20 KHz - level 4, used for dma-sound

Linux uses the 200 Hz interrupt for timer and beep by default. diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 6f432e6..b23c40e 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -18,7 +18,7 @@ export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV # rather than bools y/n

# Work out HW multipler support. This is tricky. -# 1. Spartan2 has no HW multiplers. +# 1. Spartan2 has no HW multipliers. # 2. MicroBlaze v3.x always uses them, except in Spartan 2 # 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index eae3222..8cdac14 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -70,7 +70,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)

/* * read (readb, readw, readl, readq) and write (writeb, writew, - * writel, writeq) accessors are for PCI and thus littel endian. + * writel, writeq) accessors are for PCI and thus little endian. * Linux 2.4 for Microblaze had this wrong. */ static inline unsigned char readb(const volatile void __iomem *addr) diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 1071766..746df91 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -76,7 +76,7 @@ struct pci_controller { * Used for variants of PCI indirect handling and possible quirks: * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS * to determine which bus number to match on when generating type0 * config cycles diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 2232ff94..ba65cf4 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -158,7 +158,7 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar, extern void pcibios_setup_bus_devices(struct pci_bus *bus); extern void pcibios_setup_bus_self(struct pci_bus *bus);

-/* This part of code was originaly in xilinx-pci.h */ +/* This part of code was originally in xilinx-pci.h */ #ifdef CONFIG_PCI_XILINX extern void __init xilinx_pci_init(void); #else diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index cf0afd9..4b7d8a3 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -129,7 +129,7 @@ do { \ * to use for simple wdc or wic. * * start address is cache aligned - * end address is not aligned, if end is aligned then I have to substract + * end address is not aligned, if end is aligned then I have to subtract * cacheline length because I can't flush/invalidate the next cacheline. * If is not, I align it because I will flush/invalidate whole line. */ diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index cc495d7..52746e7 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -63,8 +63,8 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) if (likely(c >= 4)) { unsigned value, buf_hold;

- /* Align the dstination to a word boundry. */ - /* This is done in an endian independant manner. */ + /* Align the destination to a word boundary. */ + /* This is done in an endian independent manner. */ switch ((unsigned long)dst & 3) { case 1: *dst++ = *src++; @@ -80,7 +80,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) i_dst = (void *)dst;

/* Choose a copy scheme based on the source */ - /* alignment relative to dstination. */ + /* alignment relative to destination. */ switch ((unsigned long)src & 3) { case 0x0: /* Both byte offsets are aligned */ i_src = (const void *)src; @@ -173,7 +173,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) }

/* Finish off any remaining bytes */ - /* simple fast copy, ... unless a cache boundry is crossed */ + /* simple fast copy, ... unless a cache boundary is crossed */ switch (c) { case 3: *dst++ = *src++; diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index 810fd68..2146c37 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -83,8 +83,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) if (c >= 4) { unsigned value, buf_hold;

- /* Align the destination to a word boundry. */ - /* This is done in an endian independant manner. */ + /* Align the destination to a word boundary. */ + /* This is done in an endian independent manner. */

switch ((unsigned long)dst & 3) { case 3: @@ -193,7 +193,7 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) dst = (void *)i_dst; }

- /* simple fast copy, ... unless a cache boundry is crossed */ + /* simple fast copy, ... unless a cache boundary is crossed */ /* Finish off any remaining bytes */ switch (c) { case 4: diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 834565d..ddf6793 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -64,7 +64,7 @@ void *memset(void *v_src, int c, __kernel_size_t n)

if (likely(n >= 4)) { /* Align the destination to a word boundary */ - /* This is done in an endian independant manner */ + /* This is done in an endian independent manner */ switch ((unsigned) src & 3) { case 1: *src++ = c; diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c index 25f18f0..4196eb6 100644 --- a/arch/microblaze/pci/indirect_pci.c +++ b/arch/microblaze/pci/indirect_pci.c @@ -108,7 +108,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | (devfn << 8) | reg | cfg_type));

- /* surpress setting of PCI_PRIMARY_BUS */ + /* suppress setting of PCI_PRIMARY_BUS */ if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) if ((offset == PCI_PRIMARY_BUS) && (bus->number == hose->first_busno)) diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto index 5d86fc1..25a6f01 100644 --- a/arch/microblaze/platform/generic/Kconfig.auto +++ b/arch/microblaze/platform/generic/Kconfig.auto @@ -29,7 +29,7 @@ config KERNEL_BASE_ADDR BASE Address for kernel

config XILINX_MICROBLAZE0_FAMILY - string "Targetted FPGA family" + string "Targeted FPGA family" default "virtex5"

config XILINX_MICROBLAZE0_USE_MSR_INSTR diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 83aa5fb..8e256cc 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1135,7 +1135,7 @@ config CPU_LOONGSON2E The Loongson 2E processor implements the MIPS III instruction set with many extensions.

- It has an internal FPGA northbridge, which is compatiable to + It has an internal FPGA northbridge, which is compatible to bonito64.

config CPU_LOONGSON2F diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ac1d5b6..53e3514 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -101,7 +101,7 @@ cflags-y += -ffreestanding # carefully avoid to add it redundantly because gcc 3.3/3.4 complains # when fed the toolchain default! # -# Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of +# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of # 2006-10-10 don't properly change the predefined symbols if -EB / -EL # are used, so we kludge that here. A bug has been filed at # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. @@ -314,5 +314,5 @@ define archhelp echo ' vmlinuz.bin - Raw binary zboot image' echo ' vmlinuz.srec - SREC zboot image' echo - echo ' These will be default as apropriate for a configured platform.' + echo ' These will be default as appropriate for a configured platform.' endef diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c index af0fe41..f38298a 100644 --- a/arch/mips/alchemy/common/clocks.c +++ b/arch/mips/alchemy/common/clocks.c @@ -75,7 +75,7 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base) * counter, if it exists. If we don't have an accurate processor * speed, all of the peripherals that derive their clocks based on * this advertised speed will introduce error and sometimes not work - * properly. This function is futher convoluted to still allow configurations + * properly. This function is further convoluted to still allow configurations * to do that in case they have really, really old silicon with a * write-only PLL register. -- Dan */ diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c index 9afc379..c8d3568 100644 --- a/arch/mips/cavium-octeon/executive/octeon-model.c +++ b/arch/mips/cavium-octeon/executive/octeon-model.c @@ -75,7 +75,7 @@ const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer)

num_cores = cvmx_octeon_num_cores();

- /* Make sure the non existant devices look disabled */ + /* Make sure the non existent devices look disabled */ switch ((chip_id >> 8) & 0xff) { case 6: /* CN50XX */ case 2: /* CN30XX */ diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index cecaf62..cd61d72 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -75,7 +75,7 @@ static int __init octeon_cf_device_init(void) * zero. */

- /* Asume that CS1 immediately follows. */ + /* Assume that CS1 immediately follows. */ mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1)); region_base = mio_boot_reg_cfg.s.base << 16; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 8b139bf..0707fae 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -662,7 +662,7 @@ void __init plat_mem_setup(void) * some memory vectors. When SPARSEMEM is in use, it doesn't * verify that the size is big enough for the final * vectors. Making the smallest chuck 4MB seems to be enough - * to consistantly work. + * to consistently work. */ mem_alloc_size = 4 << 20; if (mem_alloc_size > MAX_MEMORY) diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c index c508c00..b7f9dd3 100644 --- a/arch/mips/fw/arc/promlib.c +++ b/arch/mips/fw/arc/promlib.c @@ -4,7 +4,7 @@ * for more details. * * Copyright (C) 1996 David S. Miller (dm@sgi.com) - * Compability with board caches, Ulf Carlsson + * Compatibility with board caches, Ulf Carlsson */ #include <linux/kernel.h> #include <asm/sgialib.h> diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h index b9c8203..c0ead63 100644 --- a/arch/mips/include/asm/dec/prom.h +++ b/arch/mips/include/asm/dec/prom.h @@ -108,7 +108,7 @@ extern int (*__pmax_close)(int);

/* * On MIPS64 we have to call PROM functions via a helper - * dispatcher to accomodate ABI incompatibilities. + * dispatcher to accommodate ABI incompatibilities. */ #define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \ __asm__(#fun " = call_o32") diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h index 992d232..c5c7c0e 100644 --- a/arch/mips/include/asm/floppy.h +++ b/arch/mips/include/asm/floppy.h @@ -24,7 +24,7 @@ static inline void fd_cacheflush(char * addr, long size) * And on Mips's the CMOS info fails also ... * * FIXME: This information should come from the ARC configuration tree - * or whereever a particular machine has stored this ... + * or wherever a particular machine has stored this ... */ #define FLOPPY0_TYPE fd_drive_type(0) #define FLOPPY1_TYPE fd_drive_type(1) diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h index aca05a4..77adda2 100644 --- a/arch/mips/include/asm/hw_irq.h +++ b/arch/mips/include/asm/hw_irq.h @@ -13,7 +13,7 @@ extern atomic_t irq_err_count;

/* - * interrupt-retrigger: NOP for now. This may not be apropriate for all + * interrupt-retrigger: NOP for now. This may not be appropriate for all * machines, we'll see ... */

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 5b017f2..b04e4de 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -242,7 +242,7 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, * This version of ioremap ensures that the memory is marked uncachable * on the CPU as well as honouring existing caching rules from things like * the PCI bus. Note that there are other caches and buffers on many - * busses. In paticular driver authors should read up on PCI writes + * busses. In particular driver authors should read up on PCI writes * * It's useful if some control registers are in such an area and * write combining or read caching is not desirable: diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index 9ef3b0d..309cbcd 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -174,7 +174,7 @@ __asm__( "mtc0 \flags, $2, 1 \n" #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) /* - * Slow, but doesn't suffer from a relativly unlikely race + * Slow, but doesn't suffer from a relatively unlikely race * condition we're having since days 1. */ " beqz \flags, 1f \n" diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h index 5325084..32978d3 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h @@ -4,7 +4,7 @@ #define TAGVER_LEN 4 /* Length of Tag Version */ #define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */ #define SIG1_LEN 20 /* Company Signature 1 Length */ -#define SIG2_LEN 14 /* Company Signature 2 Lenght */ +#define SIG2_LEN 14 /* Company Signature 2 Length */ #define BOARDID_LEN 16 /* Length of BoardId */ #define ENDIANFLAG_LEN 2 /* Endian Flag Length */ #define CHIPID_LEN 6 /* Chip Id Length */ diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h index c28ba8d..6b6bab4 100644 --- a/arch/mips/include/asm/mach-ip32/mc146818rtc.h +++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h @@ -26,7 +26,7 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr) }

/* - * FIXME: Do it right. For now just assume that noone lives in 20th century + * FIXME: Do it right. For now just assume that no one lives in 20th century * and no O2 user in 22th century ;-) */ #define mc146818_decode_year(year) ((year) + 2000) diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h index 021f77c..2a8e2bb 100644 --- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h @@ -1,5 +1,5 @@ /* - * The header file of cs5536 sourth bridge. + * The header file of cs5536 south bridge. * * Copyright (C) 2007 Lemote, Inc. * Author : jlliu liujl@lemote.com diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h index 6d1ff90..6505925 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1000.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h @@ -1,5 +1,5 @@ /* - * Alchemy Semi Pb1000 Referrence Board + * Alchemy Semi Pb1000 Reference Board * * Copyright 2001, 2008 MontaVista Software Inc. * Author: MontaVista Software, Inc. source@mvista.com diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h index 962eb55..fce4332 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy Pb1200 Referrence Board + * AMD Alchemy Pb1200 Reference Board * Board Registers defines. * * ######################################################################## diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h index fc4d766..f835c88 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1550.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy Semi PB1550 Referrence Board + * AMD Alchemy Semi PB1550 Reference Board * Board Registers defines. * * Copyright 2004 Embedded Edge LLC. diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h index f76029c..a8e72cf 100644 --- a/arch/mips/include/asm/mach-powertv/dma-coherence.h +++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -48,7 +48,7 @@ static inline unsigned long virt_to_phys_from_pte(void *addr) /* check for a valid page */ if (pte_present(pte)) { /* get the physical address the page is - * refering to */ + * referring to */ phys_addr = (unsigned long) page_to_phys(pte_page(pte)); /* add the offset within the page */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 4d98709..6a6f8a8 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -922,7 +922,7 @@ do { \ #define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)

/* - * The WatchLo register. There may be upto 8 of them. + * The WatchLo register. There may be up to 8 of them. */ #define read_c0_watchlo0() __read_ulong_c0_register($18, 0) #define read_c0_watchlo1() __read_ulong_c0_register($18, 1) @@ -942,7 +942,7 @@ do { \ #define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)

/* - * The WatchHi register. There may be upto 8 of them. + * The WatchHi register. There may be up to 8 of them. */ #define read_c0_watchhi0() __read_32bit_c0_register($19, 0) #define read_c0_watchhi1() __read_32bit_c0_register($19, 1) diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h index f3c23a4..4e4c3a8 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h +++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h @@ -200,7 +200,7 @@ enum cvmx_chip_types_enum { CVMX_CHIP_TYPE_MAX, };

-/* Compatability alias for NAC38 name change, planned to be removed +/* Compatibility alias for NAC38 name change, planned to be removed * from SDK 1.7 */ #define CVMX_BOARD_TYPE_NAO38 CVMX_BOARD_TYPE_NAC38

diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h index 8e708bd..877845b 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootmem.h +++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h @@ -67,7 +67,7 @@ struct cvmx_bootmem_block_header {

/* * Structure for named memory blocks. Number of descriptors available - * can be changed without affecting compatiblity, but name length + * can be changed without affecting compatibility, but name length * changes require a bump in the bootmem descriptor version Note: This * structure must be naturally 64 bit aligned, as a single memory * image will be used by both 32 and 64 bit programs. diff --git a/arch/mips/include/asm/octeon/cvmx-l2c.h b/arch/mips/include/asm/octeon/cvmx-l2c.h index 0b32c5b..2c8ff9e 100644 --- a/arch/mips/include/asm/octeon/cvmx-l2c.h +++ b/arch/mips/include/asm/octeon/cvmx-l2c.h @@ -157,7 +157,7 @@ enum cvmx_l2c_tad_event {

/** * Configure one of the four L2 Cache performance counters to capture event - * occurences. + * occurrences. * * @counter: The counter to configure. Range 0..3. * @event: The type of L2 Cache event occurrence to count. diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h index 9d9381e..7e12867 100644 --- a/arch/mips/include/asm/octeon/cvmx.h +++ b/arch/mips/include/asm/octeon/cvmx.h @@ -151,7 +151,7 @@ enum cvmx_mips_space { #endif

/** - * Convert a memory pointer (void*) into a hardware compatable + * Convert a memory pointer (void*) into a hardware compatible * memory address (uint64_t). Octeon hardware widgets don't * understand logical addresses. * diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h index c2394f8..9ce5a1e 100644 --- a/arch/mips/include/asm/paccess.h +++ b/arch/mips/include/asm/paccess.h @@ -7,7 +7,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. * * Protected memory access. Used for everything that might take revenge - * by sending a DBE error like accessing possibly non-existant memory or + * by sending a DBE error like accessing possibly non-existent memory or * devices. */ #ifndef _ASM_PACCESS_H diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h index f1f508e..be44fb0 100644 --- a/arch/mips/include/asm/pci/bridge.h +++ b/arch/mips/include/asm/pci/bridge.h @@ -262,7 +262,7 @@ typedef volatile struct bridge_s { } bridge_t;

/* - * Field formats for Error Command Word and Auxillary Error Command Word + * Field formats for Error Command Word and Auxiliary Error Command Word * of bridge. */ typedef struct bridge_err_cmdword_s { diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h index 60a5a38..7d41474 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h @@ -205,7 +205,7 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr) * custom_read_reg32(address, tmp); <-- Reads the address and put the value * in the 'tmp' variable given * - * From here on out, you are (basicly) atomic, so don't do anything too + * From here on out, you are (basically) atomic, so don't do anything too * fancy! * Also, this code may loop if the end of this block fails to write * everything back safely due do the other CPU, so do NOT do anything diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index ead6928..c104f10 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -337,7 +337,7 @@ unsigned long get_wchan(struct task_struct *p); /* * Return_address is a replacement for __builtin_return_address(count) * which on certain architectures cannot reasonably be implemented in GCC - * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386). + * (MIPS, Alpha) or is unusable with -fomit-frame-pointer (i386). * Note that __builtin_return_address(x>=1) is forbidden because GCC * aborts compilation on some CPUs. It's simply not possible to unwind * some CPU's stackframes. diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h index 57a9719..380347b 100644 --- a/arch/mips/include/asm/sgi/ioc.h +++ b/arch/mips/include/asm/sgi/ioc.h @@ -17,7 +17,7 @@ #include <asm/sgi/pi1.h>

/* - * All registers are 8-bit wide alligned on 32-bit boundary. Bad things + * All registers are 8-bit wide aligned on 32-bit boundary. Bad things * happen if you try word access them. You have been warned. */

diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h index 591b906..77f7872 100644 --- a/arch/mips/include/asm/sibyte/sb1250_mac.h +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -520,7 +520,7 @@ #define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER)

/* - * MAC Recieve Address Filter Exact Match Registers (Table 9-21) + * MAC Receive Address Filter Exact Match Registers (Table 9-21) * Registers: MAC_ADDR0_0 through MAC_ADDR7_0 * Registers: MAC_ADDR0_1 through MAC_ADDR7_1 * Registers: MAC_ADDR0_2 through MAC_ADDR7_2 @@ -538,7 +538,7 @@ /* No bitfields */

/* - * MAC Recieve Address Filter Hash Match Registers (Table 9-22) + * MAC Receive Address Filter Hash Match Registers (Table 9-22) * Registers: MAC_HASH0_0 through MAC_HASH7_0 * Registers: MAC_HASH0_1 through MAC_HASH7_1 * Registers: MAC_HASH0_2 through MAC_HASH7_2 diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h index 1ca64b4..20ebeb8 100644 --- a/arch/mips/include/asm/siginfo.h +++ b/arch/mips/include/asm/siginfo.h @@ -101,7 +101,7 @@ typedef struct siginfo {

/* * si_code values - * Again these have been choosen to be IRIX compatible. + * Again these have been chosen to be IRIX compatible. */ #undef SI_ASYNCIO #undef SI_TIMER diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h index 09e590d..fe02900 100644 --- a/arch/mips/include/asm/sn/klconfig.h +++ b/arch/mips/include/asm/sn/klconfig.h @@ -78,7 +78,7 @@ typedef s32 klconf_off_t; */ #define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2)

-/* XXX if each node is guranteed to have some memory */ +/* XXX if each node is guaranteed to have some memory */

#define MAX_PCI_DEVS 8

@@ -539,7 +539,7 @@ typedef struct klinfo_s { /* Generic info */ #define KLSTRUCT_IOC3_TTY 24

/* Early Access IO proms are compatible - only with KLSTRUCT values upto 24. */ + only with KLSTRUCT values up to 24. */

#define KLSTRUCT_FIBERCHANNEL 25 #define KLSTRUCT_MOD_SERIAL_NUM 26 diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h index 31c76c0..46286d8 100644 --- a/arch/mips/include/asm/sn/sn0/hubio.h +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -622,7 +622,7 @@ typedef union h1_icrbb_u { */ #define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ #define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ -#define IIO_ICRB_GB_REQ 2 /* Source is Guranteed BW request */ +#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */ #define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */

/* diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index 58730c5..b4ba244 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -346,7 +346,7 @@ * we can't dispatch it directly without trashing * some registers, so we'll try to detect this unlikely * case and program a software interrupt in the VPE, - * as would be done for a cross-VPE IPI. To accomodate + * as would be done for a cross-VPE IPI. To accommodate * the handling of that case, we're doing a DVPE instead * of just a DMT here to protect against other threads. * This is a lot of cruft to cover a tiny window. diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h index 22361d5..fa133c1 100644 --- a/arch/mips/include/asm/war.h +++ b/arch/mips/include/asm/war.h @@ -227,7 +227,7 @@ #endif

/* - * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that + * On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that * may cause ll / sc and lld / scd sequences to execute non-atomically. */ #ifndef R10000_LLSC_WAR diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index bc18daa..c3b04be 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = { };

/* Early prototypes of the QI LB60 had only 1GB of NAND. - * In order to support these devices aswell the partition and ecc layout is + * In order to support these devices as well the partition and ecc layout is * initialized depending on the NAND size */ static struct mtd_partition qi_lb60_partitions_1gb[] = { { @@ -439,7 +439,7 @@ static struct platform_device *jz_platform_devices[] __initdata = { static void __init board_gpio_setup(void) { /* We only need to enable/disable pullup here for pins used in generic - * drivers. Everything else is done by the drivers themselfs. */ + * drivers. Everything else is done by the drivers themselves. */ jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N); jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD); } diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index b8bb8ba..f305ca1 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -73,7 +73,7 @@ static inline void mult_sh_align_mod(long *v1, long *v2, long *w, : "0" (5), "1" (8), "2" (5)); align_mod(align, mod); /* - * The trailing nop is needed to fullfill the two-instruction + * The trailing nop is needed to fulfill the two-instruction * requirement between reading hi/lo and staring a mult/div. * Leaving it out may cause gas insert a nop itself breaking * the desired alignment of the next chunk. diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index d9a7db7..75266ff 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -721,7 +721,7 @@ static void mipsxx_pmu_start(void)

/* * MIPS performance counters can be per-TC. The control registers can - * not be directly accessed accross CPUs. Hence if we want to do global + * not be directly accessed across CPUs. Hence if we want to do global * control, we need cross CPU calls. on_each_cpu() can help us, but we * can not make sure this function is called with interrupts enabled. So * here we pause local counters and then grab a rwlock and leave the diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index ae167df..d2112d3 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -410,7 +410,7 @@ unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, if (!kallsyms_lookup_size_offset(pc, &size, &ofs)) return 0; /* - * Return ra if an exception occured at the first instruction + * Return ra if an exception occurred at the first instruction */ if (unlikely(ofs == 0)) { pc = *ra; diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index c0e8141..1ec56e6 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -120,7 +120,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action)

local_irq_save(flags);

- vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ + vpflags = dvpe(); /* can't access the other CPU's registers whilst MVPE enabled */

switch (action) { case SMP_CALL_FUNCTION: diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index fb74974..1083ad4 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -102,7 +102,7 @@ static __init int cpu_has_mfc0_count_bug(void) case CPU_R4400SC: case CPU_R4400MC: /* - * The published errata for the R4400 upto 3.0 say the CPU + * The published errata for the R4400 up to 3.0 say the CPU * has the mfc0 from count bug. */ if ((current_cpu_data.processor_id & 0xff) <= 0x30) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index ab52b7c..dbb6b40 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -19,7 +19,7 @@ * VPE support module * * Provides support for loading a MIPS SP program on VPE1. - * The SP enviroment is rather simple, no tlb's. It needs to be relocatable + * The SP environment is rather simple, no tlb's. It needs to be relocatable * (or partially linked). You should initialise your stack in the startup * code. This loader looks for the symbol __start and sets up * execution to resume from there. The MIPS SDE kit contains suitable examples. diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index c768e300..6445716 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -17,7 +17,7 @@ .previous

/* - * Return the size of a string including the ending NUL character upto a + * Return the size of a string including the ending NUL character up to a * maximum of a1 or 0 in case of error. * * Note: for performance reasons we deliberately accept that a user may diff --git a/arch/mips/math-emu/dp_fsp.c b/arch/mips/math-emu/dp_fsp.c index 1dfbd92..daed683 100644 --- a/arch/mips/math-emu/dp_fsp.c +++ b/arch/mips/math-emu/dp_fsp.c @@ -62,7 +62,7 @@ ieee754dp ieee754dp_fsp(ieee754sp x) break; }

- /* CANT possibly overflow,underflow, or need rounding + /* CAN'T possibly overflow,underflow, or need rounding */

/* drop the hidden bit */ diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c index aa566e785f..09175f4 100644 --- a/arch/mips/math-emu/dp_mul.c +++ b/arch/mips/math-emu/dp_mul.c @@ -104,7 +104,7 @@ ieee754dp ieee754dp_mul(ieee754dp x, ieee754dp y) case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_NORM): break; } - /* rm = xm * ym, re = xe+ye basicly */ + /* rm = xm * ym, re = xe+ye basically */ assert(xm & DP_HIDDEN_BIT); assert(ym & DP_HIDDEN_BIT); { diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index 36d975a..3c4a8c5 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -32,7 +32,7 @@ * not change cp0_epc due to the instruction * * According to the spec: - * 1) it shouldnt be a branch :-) + * 1) it shouldn't be a branch :-) * 2) it can be a COP instruction :-( * 3) if we are tring to run a protected memory space we must take * special care on memory access instructions :-( diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c index c06bb40..2722a25 100644 --- a/arch/mips/math-emu/sp_mul.c +++ b/arch/mips/math-emu/sp_mul.c @@ -104,7 +104,7 @@ ieee754sp ieee754sp_mul(ieee754sp x, ieee754sp y) case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_NORM): break; } - /* rm = xm * ym, re = xe+ye basicly */ + /* rm = xm * ym, re = xe+ye basically */ assert(xm & SP_HIDDEN_BIT); assert(ym & SP_HIDDEN_BIT);

diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S index 2d08268..89c412b 100644 --- a/arch/mips/mm/cex-sb1.S +++ b/arch/mips/mm/cex-sb1.S @@ -79,7 +79,7 @@ LEAF(except_vec2_sb1) recovered_dcache: /* * Unlock CacheErr-D (which in turn unlocks CacheErr-DPA). - * Ought to log the occurence of this recovered dcache error. + * Ought to log the occurrence of this recovered dcache error. */ b recovered mtc0 $0,C0_CERR_D diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 04f9e17..5ef294f 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -352,7 +352,7 @@ static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)

/* * Write random or indexed TLB entry, and care about the hazards from - * the preceeding mtc0 and for the following eret. + * the preceding mtc0 and for the following eret. */ enum tlb_write_entry { tlb_random, tlb_indexed };

diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index e678915..49a38b0 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -130,7 +130,7 @@ int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity, * cleared in the affinity mask, there will never be any * interrupt forwarding. But as soon as a program or operator * sets affinity for one of the related IRQs, we need to make - * sure that we don't ever try to forward across the VPE boundry, + * sure that we don't ever try to forward across the VPE boundary, * at least not until we engineer a system where the interrupt * _ack() or _end() function can somehow know that it corresponds * to an interrupt taken on another VPE, and perform the appropriate diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c index 68798f8..8fbfbf2 100644 --- a/arch/mips/pci/ops-pmcmsp.c +++ b/arch/mips/pci/ops-pmcmsp.c @@ -344,7 +344,7 @@ static irqreturn_t bpci_interrupt(int irq, void *dev_id) * PCI_ACCESS_WRITE and PCI_ACCESS_READ. * * bus - pointer to the bus number of the device to - * be targetted for the configuration cycle. + * be targeted for the configuration cycle. * The only element of the pci_bus structure * used is bus->number. This argument determines * if the configuration access will be Type 0 or @@ -354,7 +354,7 @@ static irqreturn_t bpci_interrupt(int irq, void *dev_id) * * devfn - this is an 8-bit field. The lower three bits * specify the function number of the device to - * be targetted for the configuration cycle, with + * be targeted for the configuration cycle, with * all three-bit combinations being legal. The * upper five bits specify the device number, * with legal values being 10 to 31. diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 6f5e24c..af8c3199 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -210,7 +210,7 @@ static int __init bcm1480_pcibios_init(void) PCIBIOS_MIN_IO = 0x00008000UL; PCIBIOS_MIN_MEM = 0x01000000UL;

- /* Set I/O resource limits. - unlimited for now to accomodate HT */ + /* Set I/O resource limits. - unlimited for now to accommodate HT */ ioport_resource.end = 0xffffffffUL; iomem_resource.end = 0xffffffffUL;

diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c index 2d74fc9..ed1c542 100644 --- a/arch/mips/pci/pci-octeon.c +++ b/arch/mips/pci/pci-octeon.c @@ -441,7 +441,7 @@ static void octeon_pci_initialize(void)

/* * TDOMC must be set to one in PCI mode. TDOMC should be set to 4 - * in PCI-X mode to allow four oustanding splits. Otherwise, + * in PCI-X mode to allow four outstanding splits. Otherwise, * should not change from its reset value. Don't write PCI_CFG19 * in PCI mode (0x82000001 reset value), write it to 0x82000004 * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero. @@ -515,7 +515,7 @@ static void octeon_pci_initialize(void) #endif /* USE_OCTEON_INTERNAL_ARBITER */

/* - * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, + * Preferably written to 1 to set MLTD. [RDSATI,TRTAE, * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to * 1..7. */ diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 38bc280..33bba7b 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -125,7 +125,7 @@ void __devinit register_pci_controller(struct pci_controller *hose) hose_tail = &hose->next;

/* - * Do not panic here but later - this might hapen before console init. + * Do not panic here but later - this might happen before console init. */ if (!hose->io_map_base) { printk(KERN_WARNING diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c index fb37a10..2413ea6 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -239,7 +239,7 @@ void __init prom_init(void) #ifdef CONFIG_PMCTWILED /* * Setup LED states before the subsys_initcall loads other - * dependant drivers/modules. + * dependent drivers/modules. */ pmctwiled_setup(); #endif diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c index ce45df1..87167dc 100644 --- a/arch/mips/pnx833x/common/platform.c +++ b/arch/mips/pnx833x/common/platform.c @@ -165,7 +165,7 @@ static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { { .base = PNX833X_I2C0_PORTS_START, .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ - .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ + .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Preferred HDCP) */ .bus_addr = 0, /* no slave support */ }, { diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig index 5e960ae..bc5e976 100644 --- a/arch/mips/sgi-ip27/Kconfig +++ b/arch/mips/sgi-ip27/Kconfig @@ -1,7 +1,7 @@ #config SGI_SN0_XXL # bool "IP27 XXL" # depends on SGI_IP27 -# This options adds support for userspace processes upto 16TB size. +# This options adds support for userspace processes up to 16TB size. # Normally the limit is just .5TB.

choice diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO index 19f1512..160857f 100644 --- a/arch/mips/sgi-ip27/TODO +++ b/arch/mips/sgi-ip27/TODO @@ -13,7 +13,7 @@ being invoked on all nodes in ip27-memory.c. 9. start_thread must turn off UX64 ... and define tlb_refill_debug. 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable does not agree with pgd_bad/pmd_bad. -11. All intrs (ip27_do_irq handlers) are targetted at cpu A on the node. +11. All intrs (ip27_do_irq handlers) are targeted at cpu A on the node. This might need to change later. Only the timer intr is set up to be received on both Cpu A and B. (ip27_do_irq()/bridge_startup()) 13. Cache flushing (specially the SMP version) has to be investigated. diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 51d3a4f..923c080 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -93,7 +93,7 @@ static void __cpuinit per_hub_init(cnodeid_t cnode)

/* * Some interrupts are reserved by hardware or by software convention. - * Mark these as reserved right away so they won't be used accidently + * Mark these as reserved right away so they won't be used accidentally * later. */ for (i = 0; i <= BASE_PCI_IRQ; i++) { diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 1148871..0a04603 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -41,7 +41,7 @@ * Linux has a controller-independent x86 interrupt architecture. * every controller has a 'controller-template', that is used * by the main code to do the right thing. Each driver-visible - * interrupt source is transparently wired to the apropriate + * interrupt source is transparently wired to the appropriate * controller. Thus drivers need not be aware of the * interrupt-controller. * diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h index 90ed4a3..c54effa 100644 --- a/arch/mn10300/include/asm/cpu-regs.h +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -49,7 +49,7 @@ asm(" .am33_2\n"); #define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ #define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ #define EPSW_IE 0x00000800 /* interrupt enable */ -#define EPSW_S 0x00003000 /* software auxilliary bits */ +#define EPSW_S 0x00003000 /* software auxiliary bits */ #define EPSW_T 0x00008000 /* trace enable */ #define EPSW_nSL 0x00010000 /* not supervisor level */ #define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ diff --git a/arch/parisc/include/asm/eisa_eeprom.h b/arch/parisc/include/asm/eisa_eeprom.h index 9c9da98..8ce8b85 100644 --- a/arch/parisc/include/asm/eisa_eeprom.h +++ b/arch/parisc/include/asm/eisa_eeprom.h @@ -27,7 +27,7 @@ struct eeprom_header u_int8_t ver_maj; u_int8_t ver_min; u_int8_t num_slots; /* number of EISA slots in system */ - u_int16_t csum; /* checksum, I don't know how to calulate this */ + u_int16_t csum; /* checksum, I don't know how to calculate this */ u_int8_t pad[10]; } __attribute__ ((packed));

diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index e5477092a..ead8d2a 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -187,8 +187,8 @@

/* Register definitions for tlb miss handler macros */

- va = r8 /* virtual address for which the trap occured */ - spc = r24 /* space for which the trap occured */ + va = r8 /* virtual address for which the trap occurred */ + spc = r24 /* space for which the trap occurred */

#ifndef CONFIG_64BIT

@@ -882,7 +882,7 @@ ENTRY(syscall_exit_rfi) * (we don't store them in the sigcontext), so set them * to "proper" values now (otherwise we'll wind up restoring * whatever was last stored in the task structure, which might - * be inconsistent if an interrupt occured while on the gateway + * be inconsistent if an interrupt occurred while on the gateway * page). Note that we may be "trashing" values the user put in * them, but we don't support the user changing them. */ @@ -1156,11 +1156,11 @@ ENDPROC(intr_save) */

t0 = r1 /* temporary register 0 */ - va = r8 /* virtual address for which the trap occured */ + va = r8 /* virtual address for which the trap occurred */ t1 = r9 /* temporary register 1 */ pte = r16 /* pte/phys page # */ prot = r17 /* prot bits */ - spc = r24 /* space for which the trap occured */ + spc = r24 /* space for which the trap occurred */ ptp = r25 /* page directory/page table pointer */

#ifdef CONFIG_64BIT diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 4dbdf0e..145c5e4 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -131,7 +131,7 @@ $pgt_fill_loop: ldo THREAD_SZ_ALGN(%r6),%sp

#ifdef CONFIG_SMP - /* Set the smp rendevous address into page zero. + /* Set the smp rendezvous address into page zero. ** It would be safer to do this in init_smp_config() but ** it's just way easier to deal with here because ** of 64-bit function ptrs and the address is local to this file. diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c index d228d82..08324aa 100644 --- a/arch/parisc/kernel/inventory.c +++ b/arch/parisc/kernel/inventory.c @@ -93,7 +93,7 @@ void __init setup_pdc(void) case 0x6: /* 705, 710 */ case 0x7: /* 715, 725 */ case 0x8: /* 745, 747, 742 */ - case 0xA: /* 712 and similiar */ + case 0xA: /* 712 and similar */ case 0xC: /* 715/64, at least */

pdc_type = PDC_TYPE_SNAKE; diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 609a331..12c1ed3 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -291,7 +291,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &frame->uc); DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &frame->uc.uc_mcontext); err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, in_syscall); - /* FIXME: Should probably be converted aswell for the compat case */ + /* FIXME: Should probably be converted as well for the compat case */ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); } diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 68e75ce..82a52b2 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -605,7 +605,7 @@ cas_action: copy %r0, %r21

3: - /* Error occured on load or store */ + /* Error occurred on load or store */ /* Free lock */ stw %r20, 0(%sr2,%r20) #if ENABLE_LWS_DEBUG diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 74867df..4be85ee 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -34,7 +34,7 @@ /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and * narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific * implementation is required on wide palinux. Use ENTRY_COMP where - * the compatability layer has a useful 32-bit implementation. + * the compatibility layer has a useful 32-bit implementation. */ #define ENTRY_SAME(_name_) .dword sys_##_name_ #define ENTRY_DIFF(_name_) .dword sys32_##_name_ diff --git a/arch/parisc/math-emu/dfadd.c b/arch/parisc/math-emu/dfadd.c index e147d7d..d37e2d2 100644 --- a/arch/parisc/math-emu/dfadd.c +++ b/arch/parisc/math-emu/dfadd.c @@ -303,7 +303,7 @@ dbl_fadd( if(Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straight forward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/parisc/math-emu/dfsub.c b/arch/parisc/math-emu/dfsub.c index 87ebc60..2e8b5a7 100644 --- a/arch/parisc/math-emu/dfsub.c +++ b/arch/parisc/math-emu/dfsub.c @@ -306,7 +306,7 @@ dbl_fsub( if(Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straight forward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/parisc/math-emu/fmpyfadd.c b/arch/parisc/math-emu/fmpyfadd.c index 5dd7f93..b067c45 100644 --- a/arch/parisc/math-emu/fmpyfadd.c +++ b/arch/parisc/math-emu/fmpyfadd.c @@ -531,7 +531,7 @@ dbl_fmpyfadd( sign_save = Dbl_signextendedsign(resultp1); if (Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most @@ -1191,7 +1191,7 @@ unsigned int *status; sign_save = Dbl_signextendedsign(resultp1); if (Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most @@ -1841,7 +1841,7 @@ unsigned int *status; sign_save = Sgl_signextendedsign(resultp1); if (Sgl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most @@ -2483,7 +2483,7 @@ unsigned int *status; sign_save = Sgl_signextendedsign(resultp1); if (Sgl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most diff --git a/arch/parisc/math-emu/sfadd.c b/arch/parisc/math-emu/sfadd.c index 008d721..f802cd6 100644 --- a/arch/parisc/math-emu/sfadd.c +++ b/arch/parisc/math-emu/sfadd.c @@ -298,7 +298,7 @@ sgl_fadd( if(Sgl_iszero_hidden(result)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straightforward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/parisc/math-emu/sfsub.c b/arch/parisc/math-emu/sfsub.c index 24eef61..5f90d0f 100644 --- a/arch/parisc/math-emu/sfsub.c +++ b/arch/parisc/math-emu/sfsub.c @@ -301,7 +301,7 @@ sgl_fsub( if(Sgl_iszero_hidden(result)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straightforward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index 2e56187..f18c6d9 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -209,8 +209,8 @@ static __inline__ unsigned long ffz(unsigned long x) return BITS_PER_LONG;

/* - * Calculate the bit position of the least signficant '1' bit in x - * (since x has been changed this will actually be the least signficant + * Calculate the bit position of the least significant '1' bit in x + * (since x has been changed this will actually be the least significant * '0' bit in * the original x). Note: (x & -x) gives us a mask that * is the least significant * (RIGHT-most) 1-bit of the value in x. */ diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index 2296112..91010e8 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -140,7 +140,7 @@ static inline void __user *arch_compat_alloc_user_space(long len) unsigned long usp = regs->gpr[1];

/* - * We cant access below the stack pointer in the 32bit ABI and + * We can't access below the stack pointer in the 32bit ABI and * can access 288 bytes in the 64bit ABI */ if (!is_32bit_task()) diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h index e50323f..4398a6c 100644 --- a/arch/powerpc/include/asm/cpm.h +++ b/arch/powerpc/include/asm/cpm.h @@ -98,7 +98,7 @@ typedef struct cpm_buf_desc { #define BD_SC_INTRPT (0x1000) /* Interrupt on change */ #define BD_SC_LAST (0x0800) /* Last buffer in frame */ #define BD_SC_TC (0x0400) /* Transmit CRC */ -#define BD_SC_CM (0x0200) /* Continous mode */ +#define BD_SC_CM (0x0200) /* Continuous mode */ #define BD_SC_ID (0x0100) /* Rec'd too many idles */ #define BD_SC_P (0x0100) /* xmt preamble */ #define BD_SC_BR (0x0020) /* Break received */ diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index bd07650d..8ee4211 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -4,7 +4,7 @@ * * This file contains structures and information for the communication * processor channels. Some CPM control and status is available - * throught the MPC8xx internal memory map. See immap.h for details. + * through the MPC8xx internal memory map. See immap.h for details. * This file only contains what I need for the moment, not the total * CPM capabilities. I (or someone else) will add definitions as they * are needed. -- Dan diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index ec089ac..8edec71 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -122,7 +122,7 @@ #define H_DABRX_KERNEL (1UL<<(63-62)) #define H_DABRX_USER (1UL<<(63-63))

-/* Each control block has to be on a 4K bondary */ +/* Each control block has to be on a 4K boundary */ #define H_CB_ALIGNMENT 4096

/* pSeries hypervisor opcodes */ diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h index d0e7701..be0171a 100644 --- a/arch/powerpc/include/asm/kprobes.h +++ b/arch/powerpc/include/asm/kprobes.h @@ -50,7 +50,7 @@ typedef unsigned int kprobe_opcode_t; * Handle cases where: * - User passes a <.symbol> or module:.symbol * - User passes a <symbol> or module:symbol - * - User passes a non-existant symbol, kallsyms_lookup_name + * - User passes a non-existent symbol, kallsyms_lookup_name * returns 0. Don't deref the NULL pointer in that case */ #define kprobe_lookup_name(name, addr) \ diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index 26b8c80..a077adc 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -105,7 +105,7 @@ struct lppaca { // processing of external interrupts. Note that PLIC will store the // XIRR directly into the xXirrValue field so that another XIRR will // not be presented until this one clears. The layout of the low - // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the + // 4-bytes of this Dword is up to SLIC - PLIC just checks whether the // entire Dword is zero or not. A non-zero value in the low order // 2-bytes will result in SLIC being granted the highest thread // priority upon return. A 0 will return to SLIC as medium priority. diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index 932f88d..812b2cd 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -169,7 +169,7 @@ do { \ /* * This is the default if a program doesn't have a PT_GNU_STACK * program header entry. The PPC64 ELF ABI has a non executable stack - * stack by default, so in the absense of a PT_GNU_STACK program header + * stack by default, so in the absence of a PT_GNU_STACK program header * we turn execute permission off. */ #define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h index 19fd793..eafa5a5 100644 --- a/arch/powerpc/include/asm/pasemi_dma.h +++ b/arch/powerpc/include/asm/pasemi_dma.h @@ -522,7 +522,7 @@ extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, dma_addr_t *handle);

-/* Routines to allocate flags (events) for channel syncronization */ +/* Routines to allocate flags (events) for channel synchronization */ extern int pasemi_dma_alloc_flag(void); extern void pasemi_dma_free_flag(int flag); extern void pasemi_dma_set_flag(int flag); diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 5e156e0..b90dbf8 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -106,7 +106,7 @@ struct pci_controller { * Used for variants of PCI indirect handling and possible quirks: * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS * to determine which bus number to match on when generating type0 * config cycles diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h index 00eedc5..10902c9 100644 --- a/arch/powerpc/include/asm/pmac_feature.h +++ b/arch/powerpc/include/asm/pmac_feature.h @@ -53,8 +53,8 @@

/* Here is the infamous serie of OHare based machines */ -#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ -#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ +#define PMAC_TYPE_COMET 0x20 /* Believed to be PowerBook 2400 */ +#define PMAC_TYPE_HOOPER 0x21 /* Believed to be PowerBook 3400 */ #define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ #define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ #define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index 76bb195..811f04a 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -86,7 +86,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); #define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1)) #endif

-/* _PAGE_CHG_MASK masks of bits that are to be preserved accross +/* _PAGE_CHG_MASK masks of bits that are to be preserved across * pgprot changes */ #define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ @@ -174,7 +174,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); /* * Don't just check for any non zero bits in __PAGE_USER, since for book3e * and PTE_64BIT, PAGE_KERNEL_X contains _PAGE_BAP_SR which is also in - * _PAGE_USER. Need to explictly match _PAGE_BAP_UR bit in that case too. + * _PAGE_USER. Need to explicitly match _PAGE_BAP_UR bit in that case too. */ #define pte_user(val) ((val & _PAGE_USER) == _PAGE_USER)

diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 3b1a9b7..b316794 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -2,7 +2,7 @@ * Contains register definitions common to the Book E PowerPC * specification. Notice that while the IBM-40x series of CPUs * are not true Book E PowerPCs, they borrowed a number of features - * before Book E was finalized, and are included here as well. Unfortunatly, + * before Book E was finalized, and are included here as well. Unfortunately, * they sometimes used different locations than true Book E CPUs did. * * This program is free software; you can redistribute it and/or diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h index 25020a3..d8f5c60 100644 --- a/arch/powerpc/include/asm/spu_priv1.h +++ b/arch/powerpc/include/asm/spu_priv1.h @@ -223,7 +223,7 @@ spu_disable_spu (struct spu_context *ctx) }

/* - * The declarations folowing are put here for convenience + * The declarations following are put here for convenience * and only intended to be used by the platform setup code. */

diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h index f737732..ae9c899 100644 --- a/arch/powerpc/include/asm/uninorth.h +++ b/arch/powerpc/include/asm/uninorth.h @@ -60,7 +60,7 @@ * * Obviously, the GART is not cache coherent and so any change to it * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself doens't seem to be cache coherent neither. + * cachable). AGP memory itself does't seem to be cache coherent neither. * * In order to invalidate the GART (which is probably necessary to inval * the bridge internal TLBs), the following sequence has to be written, diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h index 25e3922..b73a819 100644 --- a/arch/powerpc/include/asm/vdso_datapage.h +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -57,7 +57,7 @@ struct vdso_data { } version;

/* Note about the platform flags: it now only contains the lpar - * bit. The actual platform number is dead and burried + * bit. The actual platform number is dead and buried */ __u32 platform; /* Platform flags 0x18 */ __u32 processor; /* Processor type 0x1C */ diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 625942a..60b3e37 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -99,7 +99,7 @@ void __init btext_prepare_BAT(void)

/* This function can be used to enable the early boot text when doing * OF booting or within bootx init. It must be followed by a btext_unmap() - * call before the logical address becomes unuseable + * call before the logical address becomes unusable */ void __init btext_setup_display(int width, int height, int depth, int pitch, unsigned long address) diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 5c43063..9651acc 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -379,7 +379,7 @@ interrupt_end_book3e: mfspr r13,SPRN_SPRG_PACA /* get our PACA */ b system_call_common

-/* Auxillary Processor Unavailable Interrupt */ +/* Auxiliary Processor Unavailable Interrupt */ START_EXCEPTION(ap_unavailable); NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE) EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index c532cb2..aeb739e 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -5,7 +5,7 @@ * handling and other fixed offset specific things. * * This file is meant to be #included from head_64.S due to - * position dependant assembly. + * position dependent assembly. * * Most of this originates from head_64.S and thus has the same * copyright history. diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 9dd21a8..a91626d 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -766,7 +766,7 @@ DataAccess: * miss get to this point to load the TLB. * r10 - TLB_TAG value * r11 - Linux PTE - * r12, r9 - avilable to use + * r12, r9 - available to use * PID - loaded with proper value when we get here * Upon exit, we reload everything and RFI. * Actually, it will fit now, but oh well.....a common place diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index cbb3436..5e12b74 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -178,7 +178,7 @@ interrupt_base: NORMAL_EXCEPTION_PROLOG EXC_XFER_EE_LITE(0x0c00, DoSyscall)

- /* Auxillary Processor Unavailable Interrupt */ + /* Auxiliary Processor Unavailable Interrupt */ EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)

/* Decrementer Interrupt */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 782f23d..285e6f7 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -40,7 +40,7 @@ #include <asm/kvm_book3s_asm.h> #include <asm/ptrace.h>

-/* The physical memory is layed out such that the secondary processor +/* The physical memory is laid out such that the secondary processor * spin code sits at 0x0000...0x00ff. On server, the vectors follow * using the layout described in exceptions-64s.S */ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 3e02710..5ecf54c 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -326,7 +326,7 @@ interrupt_base: NORMAL_EXCEPTION_PROLOG EXC_XFER_EE_LITE(0x0c00, DoSyscall)

- /* Auxillary Processor Unavailable Interrupt */ + /* Auxiliary Processor Unavailable Interrupt */ EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)

/* Decrementer Interrupt */ diff --git a/arch/powerpc/kernel/l2cr_6xx.S b/arch/powerpc/kernel/l2cr_6xx.S index 2a2f3c3..97ec855 100644 --- a/arch/powerpc/kernel/l2cr_6xx.S +++ b/arch/powerpc/kernel/l2cr_6xx.S @@ -151,7 +151,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) /**** Might be a good idea to set L2DO here - to prevent instructions from getting into the cache. But since we invalidate the next time we enable the cache it doesn't really matter. - Don't do this unless you accomodate all processor variations. + Don't do this unless you accommodate all processor variations. The bit moved on the 7450..... ****/

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 1646836..301db65 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -262,7 +262,7 @@ static void parse_ppp_data(struct seq_file *m) seq_printf(m, "system_active_processors=%d\n", ppp_data.active_system_procs);

- /* pool related entries are apropriate for shared configs */ + /* pool related entries are appropriate for shared configs */ if (lppaca_of(0).shared_proc) { unsigned long pool_idle_time, pool_procs;

diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index 97e0ae4..c4063b7 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -759,7 +759,7 @@ static int power_pmu_add(struct perf_event *event, int ef_flags)

/* * If group events scheduling transaction was started, - * skip the schedulability test here, it will be peformed + * skip the schedulability test here, it will be performed * at commit time(->commit_txn) as a whole */ if (cpuhw->group_flag & PERF_EVENT_TXN) diff --git a/arch/powerpc/kernel/ppc_save_regs.S b/arch/powerpc/kernel/ppc_save_regs.S index e83ba3f..1b1787d 100644 --- a/arch/powerpc/kernel/ppc_save_regs.S +++ b/arch/powerpc/kernel/ppc_save_regs.S @@ -15,7 +15,7 @@

/* * Grab the register values as they are now. - * This won't do a particularily good job because we really + * This won't do a particularly good job because we really * want our caller's caller's registers, and our caller has * already executed its prologue. * ToDo: We could reach back into the caller's save area to do diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 05b7139..e74fa12 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -683,7 +683,7 @@ void __init early_init_devtree(void *params) #endif

#ifdef CONFIG_PHYP_DUMP - /* scan tree to see if dump occured during last boot */ + /* scan tree to see if dump occurred during last boot */ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); #endif

@@ -739,7 +739,7 @@ void __init early_init_devtree(void *params)

DBG("Scanning CPUs ...\n");

- /* Retreive CPU related informations from the flat tree + /* Retrieve CPU related informations from the flat tree * (altivec support, boot CPU ID, ...) */ of_scan_flat_dt(early_init_dt_scan_cpus, NULL); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 895b082..55613e3 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -463,7 +463,7 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset, #ifdef CONFIG_VSX /* * Currently to set and and get all the vsx state, you need to call - * the fp and VMX calls aswell. This only get/sets the lower 32 + * the fp and VMX calls as well. This only get/sets the lower 32 * 128bit VSX registers. */

diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c index 7980ec0..67f6c3b 100644 --- a/arch/powerpc/kernel/rtasd.c +++ b/arch/powerpc/kernel/rtasd.c @@ -465,7 +465,7 @@ static void start_event_scan(void) pr_debug("rtasd: will sleep for %d milliseconds\n", (30000 / rtas_event_scan_rate));

- /* Retreive errors from nvram if any */ + /* Retrieve errors from nvram if any */ retreive_nvram_error_log();

schedule_delayed_work_on(cpumask_first(cpu_online_mask), diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S index b0754e2..ba4dee3 100644 --- a/arch/powerpc/kernel/swsusp_32.S +++ b/arch/powerpc/kernel/swsusp_32.S @@ -143,7 +143,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)

/* Disable MSR:DR to make sure we don't take a TLB or * hash miss during the copy, as our hash table will - * for a while be unuseable. For .text, we assume we are + * for a while be unusable. For .text, we assume we are * covered by a BAT. This works only for non-G5 at this * point. G5 will need a better approach, possibly using * a small temporary hash table filled with large mappings, diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index bd74fac..5ddb801b 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -959,7 +959,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) * ESR_DST (!?) or 0. In the process of chasing this with the * hardware people - not sure if it can happen on any illegal * instruction or only on FP instructions, whether there is a - * pattern to occurences etc. -dgibson 31/Mar/2003 */ + * pattern to occurrences etc. -dgibson 31/Mar/2003 */ switch (do_mathemu(regs)) { case 0: emulate_single_step(regs); diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index b4b167b..baa33a7 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -1,5 +1,5 @@ /* - * udbg for NS16550 compatable serial ports + * udbg for NS16550 compatible serial ports * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * diff --git a/arch/powerpc/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S index 68d49dd..cf0c9c9 100644 --- a/arch/powerpc/kernel/vdso32/sigtramp.S +++ b/arch/powerpc/kernel/vdso32/sigtramp.S @@ -19,7 +19,7 @@

/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from the return address to get an address in the middle of the presumed - call instruction. Since we don't have a call here, we artifically + call instruction. Since we don't have a call here, we artificially extend the range covered by the unwind info by adding a nop before the real start. */ nop diff --git a/arch/powerpc/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S index 59eb59b..45ea281 100644 --- a/arch/powerpc/kernel/vdso64/sigtramp.S +++ b/arch/powerpc/kernel/vdso64/sigtramp.S @@ -20,7 +20,7 @@

/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from the return address to get an address in the middle of the presumed - call instruction. Since we don't have a call here, we artifically + call instruction. Since we don't have a call here, we artificially extend the range covered by the unwind info by padding before the real start. */ nop diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 3079f6b..5b7dd4e 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -192,8 +192,8 @@ htab_insert_pte: rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */

/* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -215,8 +215,8 @@ _GLOBAL(htab_call_hpte_insert1) rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -495,8 +495,8 @@ htab_special_pfn: rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */

/* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -522,8 +522,8 @@ _GLOBAL(htab_call_hpte_insert1) rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */

/* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -813,8 +813,8 @@ ht64_insert_pte: rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */

/* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_64K ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -836,8 +836,8 @@ _GLOBAL(ht64_call_hpte_insert1) rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */

/* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_64K ld r9,STK_PARM(r9)(r1) /* segment size */ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index a5991fa..58a022d 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -753,7 +753,7 @@ void __cpuinit early_init_mmu_secondary(void) mtspr(SPRN_SDR1, _SDR1);

/* Initialize STAB/SLB. We use a virtual address as it works - * in real mode on pSeries and we want a virutal address on + * in real mode on pSeries and we want a virtual address on * iSeries anyway */ if (cpu_has_feature(CPU_FTR_SLB)) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index a664996..57e545b 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -424,7 +424,7 @@ void clear_user_page(void *page, unsigned long vaddr, struct page *pg) clear_page(page);

/* - * We shouldnt have to do this, but some versions of glibc + * We shouldn't have to do this, but some versions of glibc * require it (ld.so assumes zero filled pages are icache clean) * - Anton */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 0dc95c0..5ec1dad 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -440,11 +440,11 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp) }

/* - * Retreive and validate the ibm,dynamic-memory property of the device tree. + * Retrieve and validate the ibm,dynamic-memory property of the device tree. * * The layout of the ibm,dynamic-memory property is a number N of memblock * list entries followed by N memblock list entries. Each memblock list entry - * contains information as layed out in the of_drconf_cell struct above. + * contains information as laid out in the of_drconf_cell struct above. */ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm) { @@ -468,7 +468,7 @@ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm) }

/* - * Retreive and validate the ibm,lmb-size property for drconf memory + * Retrieve and validate the ibm,lmb-size property for drconf memory * from the device tree. */ static u64 of_get_lmb_size(struct device_node *memory) @@ -490,7 +490,7 @@ struct assoc_arrays { };

/* - * Retreive and validate the list of associativity arrays for drconf + * Retrieve and validate the list of associativity arrays for drconf * memory from the ibm,associativity-lookup-arrays property of the * device tree.. * @@ -604,7 +604,7 @@ static int __cpuinit cpu_numa_callback(struct notifier_block *nfb, * Returns the size the region should have to enforce the memory limit. * This will either be the original value of size, a truncated value, * or zero. If the returned value of size is 0 the region should be - * discarded as it lies wholy above the memory limit. + * discarded as it lies wholly above the memory limit. */ static unsigned long __init numa_enforce_memory_limit(unsigned long start, unsigned long size) diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 8526bd9..33cf704 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -192,7 +192,7 @@ normal_tlb_miss: or r10,r15,r14

BEGIN_MMU_FTR_SECTION - /* Set the TLB reservation and seach for existing entry. Then load + /* Set the TLB reservation and search for existing entry. Then load * the entry. */ PPC_TLBSRX_DOT(0,r16) @@ -425,7 +425,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)

virt_page_table_tlb_miss_fault: /* If we fault here, things are a little bit tricky. We need to call - * either data or instruction store fault, and we need to retreive + * either data or instruction store fault, and we need to retrieve * the original fault address and ESR (for data). * * The thing is, we know that in normal circumstances, this is diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index c4d2b71..cb515cf 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -67,7 +67,7 @@

#define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */

-/* Minumum HW interval timer setting to send value to trace buffer is 10 cycle. +/* Minimum HW interval timer setting to send value to trace buffer is 10 cycle. * To configure counter to send value every N cycles set counter to * 2^32 - 1 - N. */ @@ -1470,7 +1470,7 @@ static int cell_global_start(struct op_counter_config *ctr) * trace buffer at the maximum rate possible. The trace buffer is configured * to store the PCs, wrapping when it is full. The performance counter is * initialized to the max hardware count minus the number of events, N, between - * samples. Once the N events have occured, a HW counter overflow occurs + * samples. Once the N events have occurred, a HW counter overflow occurs * causing the generation of a HW counter interrupt which also stops the * writing of the SPU PC values to the trace buffer. Hence the last PC * written to the trace buffer is the SPU PC that we want. Unfortunately, @@ -1656,7 +1656,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs, * The counters were frozen by the interrupt. * Reenable the interrupt and restart the counters. * If there was a race between the interrupt handler and - * the virtual counter routine. The virutal counter + * the virtual counter routine. The virtual counter * routine may have cleared the interrupts. Hence must * use the virt_cntr_inter_mask to re-enable the interrupts. */ diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 8077409..8ee51a2 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -207,7 +207,7 @@ static unsigned long get_pc(struct pt_regs *regs) unsigned long mmcra; unsigned long slot;

- /* Cant do much about it */ + /* Can't do much about it */ if (!cur_cpu_spec->oprofile_mmcra_sihv) return pc;

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index 6385d88..9940ce8 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -57,7 +57,7 @@ struct mpc52xx_lpbfifo { static struct mpc52xx_lpbfifo lpbfifo;

/** - * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered + * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transferred */ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) { @@ -179,7 +179,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) * * On transmit, the dma completion irq triggers before the fifo completion * triggers. Handle the dma completion here instead of the LPB FIFO Bestcomm - * task completion irq becuase everyting is not really done until the LPB FIFO + * task completion irq because everything is not really done until the LPB FIFO * completion irq triggers. * * In other words: @@ -195,7 +195,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) * Exit conditions: * 1) Transfer aborted * 2) FIFO complete without DMA; more data to do - * 3) FIFO complete without DMA; all data transfered + * 3) FIFO complete without DMA; all data transferred * 4) FIFO complete using DMA * * Condition 1 can occur regardless of whether or not DMA is used. diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index 3ddea96..1dd1540 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -512,7 +512,7 @@ void __init mpc52xx_init_irq(void) /** * mpc52xx_get_irq - Get pending interrupt number hook function * - * Called by the interupt handler to determine what IRQ handler needs to be + * Called by the interrupt handler to determine what IRQ handler needs to be * executed. * * Status of pending interrupts is determined by reading the encoded status diff --git a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c index 3b894f5..1470699 100644 --- a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c +++ b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c @@ -90,7 +90,7 @@ int spu_alloc_lscsa(struct spu_state *csa) */ for (i = 0; i < SPU_LSCSA_NUM_BIG_PAGES; i++) { /* XXX This is likely to fail, we should use a special pool - * similiar to what hugetlbfs does. + * similar to what hugetlbfs does. */ csa->lscsa_pages[i] = alloc_pages(GFP_KERNEL, SPU_64K_PAGE_ORDER); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 0b04662..6520385 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -846,7 +846,7 @@ static struct spu_context *grab_runnable_context(int prio, int node) struct list_head *rq = &spu_prio->runq[best];

list_for_each_entry(ctx, rq, rq) { - /* XXX(hch): check for affinity here aswell */ + /* XXX(hch): check for affinity here as well */ if (__node_allowed(ctx, node)) { __spu_del_from_rq(ctx); goto found; diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore.c b/arch/powerpc/platforms/cell/spufs/spu_restore.c index 21a9c95..72c905f 100644 --- a/arch/powerpc/platforms/cell/spufs/spu_restore.c +++ b/arch/powerpc/platforms/cell/spufs/spu_restore.c @@ -284,7 +284,7 @@ static inline void restore_complete(void) exit_instrs[3] = BR_INSTR; break; default: - /* SPU_Status[R]=1. No additonal instructions. */ + /* SPU_Status[R]=1. No additional instructions. */ break; } spu_sync(); diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index b5e026b..62dabe3 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -51,7 +51,7 @@ static int mf_initialized;

/* - * This is the structure layout for the Machine Facilites LPAR event + * This is the structure layout for the Machine Facilities LPAR event * flows. */ struct vsp_cmd_data { diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index b5f05d9..2376069c 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -396,7 +396,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mTargetInst)) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "int msg rcvd, source inst (%d) doesnt match (%d)\n", + "int msg rcvd, source inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mTargetInst, event->xSourceInstanceId); return; @@ -407,7 +407,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mSourceInst)) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "int msg rcvd, target inst (%d) doesnt match (%d)\n", + "int msg rcvd, target inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mSourceInst, event->xTargetInstanceId); return; @@ -418,7 +418,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mSourceInst) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "ack msg rcvd, source inst (%d) doesnt match (%d)\n", + "ack msg rcvd, source inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mSourceInst, event->xSourceInstanceId); return; @@ -428,7 +428,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mTargetInst) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "viopath: ack msg rcvd, target inst (%d) doesnt match (%d)\n", + "viopath: ack msg rcvd, target inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mTargetInst, event->xTargetInstanceId); return; diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c index 09695ae..321a9b3 100644 --- a/arch/powerpc/platforms/pasemi/dma_lib.c +++ b/arch/powerpc/platforms/pasemi/dma_lib.c @@ -379,9 +379,9 @@ void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, } EXPORT_SYMBOL(pasemi_dma_free_buf);

-/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization +/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel synchronization * - * Allocates a flag for use with channel syncronization (event descriptors). + * Allocates a flag for use with channel synchronization (event descriptors). * Returns allocated flag (0-63), < 0 on error. */ int pasemi_dma_alloc_flag(void) diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 50f1693..ea47df6 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -11,7 +11,7 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o -# CONFIG_NVRAM is an arch. independant tristate symbol, for pmac32 we really +# CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y obj-$(CONFIG_NVRAM:m=y) += nvram.o diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 480567e..e9c8a60 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -904,7 +904,7 @@ static void __init smu_i2c_probe(void) printk(KERN_INFO "SMU i2c %s\n", controller->full_name);

/* Look for childs, note that they might not be of the right - * type as older device trees mix i2c busses and other thigns + * type as older device trees mix i2c busses and other things * at the same level */ for (busnode = NULL; diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index ab68989..f33e08d 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -299,7 +299,7 @@ static void __init setup_chaos(struct pci_controller *hose, * This function deals with some "special cases" devices. * * 0 -> No special case - * 1 -> Skip the device but act as if the access was successfull + * 1 -> Skip the device but act as if the access was successful * (return 0xff's on reads, eventually, cache config space * accesses in a later version) * -1 -> Hide the device (unsuccessful access) diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index b74a923..57ceb92 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -74,7 +74,7 @@ static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa) return NULL;

/* The configure connector reported name does not contain a - * preceeding '/', so we allocate a buffer large enough to + * preceding '/', so we allocate a buffer large enough to * prepend this to the full_name. */ name = (char *)ccwa + ccwa->name_offset; diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 3cc4d10..8964917 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -65,7 +65,7 @@ * with EEH. * * Ideally, a PCI device driver, when suspecting that an isolation - * event has occured (e.g. by reading 0xff's), will then ask EEH + * event has occurred (e.g. by reading 0xff's), will then ask EEH * whether this is the case, and then take appropriate steps to * reset the PCI slot, the PCI device, and then resume operations. * However, until that day, the checking is done here, with the diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index fd50ccd..ef8c454 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -216,7 +216,7 @@ static void pseries_cpu_die(unsigned int cpu) cpu, pcpu, cpu_status); }

- /* Isolation and deallocation are definatly done by + /* Isolation and deallocation are definitely done by * drslot_chrp_cpu. If they were not they would be * done here. Change isolate state to Isolate and * change allocation-state to Unusable. diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 154c464..6d5412a 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -272,7 +272,7 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) return tce_ret; }

-/* this is compatable with cells for the device tree property */ +/* this is compatible with cells for the device tree property */ struct dynamic_dma_window_prop { __be32 liobn; /* tce table number */ __be64 dma_base; /* address hi,lo */ @@ -976,7 +976,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev));

/* dev setup for LPAR is a little tricky, since the device tree might - * contain the dma-window properties per-device and not neccesarily + * contain the dma-window properties per-device and not necessarily * for the bus. So we need to search upwards in the tree until we * either hit a dma-window property, OR find a parent with a table * already allocated. @@ -1033,7 +1033,7 @@ static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)

/* * the device tree might contain the dma-window properties - * per-device and not neccesarily for the bus. So we need to + * per-device and not necessarily for the bus. So we need to * search upwards in the tree until we either hit a dma-window * property, OR find a parent with a table already allocated. */ diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index ec8fe22..d690133 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -897,7 +897,7 @@ void xics_migrate_irqs_away(void) int status; unsigned long flags;

- /* We cant set affinity on ISA interrupts */ + /* We can't set affinity on ISA interrupts */ if (virq < NUM_ISA_INTERRUPTS) continue; if (irq_map[virq].host != xics_host) diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 27402c7d..1636dd8 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -95,7 +95,7 @@ axon_ram_irq_handler(int irq, void *dev)

BUG_ON(!bank);

- dev_err(&device->dev, "Correctable memory error occured\n"); + dev_err(&device->dev, "Correctable memory error occurred\n"); bank->ecc_counter++; return IRQ_HANDLED; } diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/arch/powerpc/sysdev/bestcomm/bestcomm.h index 23a95f8..a0e2e6b1 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.h +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.h @@ -20,7 +20,7 @@ * struct bcom_bd - Structure describing a generic BestComm buffer descriptor * @status: The current status of this buffer. Exact meaning depends on the * task type - * @data: An array of u32 extra data. Size of array is task dependant. + * @data: An array of u32 extra data. Size of array is task dependent. * * Note: Don't dereference a bcom_bd pointer as an array. The size of the * bcom_bd is variable. Use bcom_get_bd() instead. diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h index eb0d1c8..3b52f3f 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h +++ b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h @@ -97,7 +97,7 @@ struct bcom_task_header { u8 reserved[8]; };

-/* Descriptors stucture & co */ +/* Descriptors structure & co */ #define BCOM_DESC_NOP 0x000001f8 #define BCOM_LCD_MASK 0x80000000 #define BCOM_DRD_EXTENDED 0x40000000 diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 8b5aba2..e0bc944 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -223,7 +223,7 @@ void __init cpm_reset(void)

/* Set SDMA Bus Request priority 5. * On 860T, this also enables FEC priority 6. I am not sure - * this is what we realy want for some applications, but the + * this is what we really want for some applications, but the * manual recommends it. * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index 7ed8096..82fdad8 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -117,7 +117,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | (devfn << 8) | reg | cfg_type));

- /* surpress setting of PCI_PRIMARY_BUS */ + /* suppress setting of PCI_PRIMARY_BUS */ if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) if ((offset == PCI_PRIMARY_BUS) && (bus->number == hose->first_busno)) diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index 56d9e5d..c39a134 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -324,7 +324,7 @@ #define PESDR0_460EX_IHS2 0x036D

/* - * 460SX addtional DCRs + * 460SX additional DCRs */ #define PESDRn_460SX_RCEI 0x02

diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 5c5ba10..d9db138 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -9,7 +9,7 @@ * * Atomic operations that C can't guarantee us. * Useful for resource counting etc. - * s390 uses 'Compare And Swap' for atomicity in SMP enviroment. + * s390 uses 'Compare And Swap' for atomicity in SMP environment. * */

diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h index e34347d..fc50a33 100644 --- a/arch/s390/include/asm/cio.h +++ b/arch/s390/include/asm/cio.h @@ -183,7 +183,7 @@ struct esw3 { * The irb that is handed to the device driver when an interrupt occurs. For * solicited interrupts, the common I/O layer already performs checks whether * a field is valid; a field not being valid is always passed as %0. - * If a unit check occured, @ecw may contain sense data; this is retrieved + * If a unit check occurred, @ecw may contain sense data; this is retrieved * by the common I/O layer itself if the device doesn't support concurrent * sense (so that the device driver never needs to perform basic sene itself). * For unsolicited interrupts, the irb is passed as-is (expect for sense data, diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S index 5e73dee..9eabbc9 100644 --- a/arch/s390/kernel/reipl64.S +++ b/arch/s390/kernel/reipl64.S @@ -78,7 +78,7 @@ do_reipl_asm: basr %r13,0 * in the ESA psw. * Bit 31 of the addresses has to be 0 for the * 31bit lpswe instruction a fact they appear to have - * ommited from the pop. + * omitted from the pop. */ .Lnewpsw: .quad 0x0000000080000000 .quad .Lpg1 diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index ed183c2..f5434d1 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -708,7 +708,7 @@ static void __init setup_hwcaps(void) * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information * as stored by stfl, bits 32-xxx contain additional facilities. * How many facility words are stored depends on the number of - * doublewords passed to the instruction. The additional facilites + * doublewords passed to the instruction. The additional facilities * are: * Bit 42: decimal floating point facility is installed * Bit 44: perform floating point operation facility is installed diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 9e7b039..87be655 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -724,7 +724,7 @@ static void clock_sync_cpu(struct clock_sync_data *sync) }

/* - * Sync the TOD clock using the port refered to by aibp. This port + * Sync the TOD clock using the port referred to by aibp. This port * has to be enabled and the other port has to be disabled. The * last eacr update has to be more than 1.6 seconds in the past. */ @@ -1012,7 +1012,7 @@ static void etr_work_fn(struct work_struct *work) eacr = etr_handle_update(&aib, eacr);

/* - * Select ports to enable. The prefered synchronization mode is PPS. + * Select ports to enable. The preferred synchronization mode is PPS. * If a port can be enabled depends on a number of things: * 1) The port needs to be online and uptodate. A port is not * disabled just because it is not uptodate, but it is only @@ -1091,7 +1091,7 @@ static void etr_work_fn(struct work_struct *work) /* * Update eacr and try to synchronize the clock. If the update * of eacr caused a stepping port switch (or if we have to - * assume that a stepping port switch has occured) or the + * assume that a stepping port switch has occurred) or the * clock syncing failed, reset the sync check control bit * and set up a timer to try again after 0.5 seconds */ diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 1ccdf4d..5e8ead4 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -44,7 +44,7 @@ static inline void set_vtimer(__u64 expires) __u64 timer;

asm volatile (" STPT %0\n" /* Store current cpu timer value */ - " SPT %1" /* Set new value immediatly afterwards */ + " SPT %1" /* Set new value immediately afterwards */ : "=m" (timer) : "m" (expires) ); S390_lowcore.system_timer += S390_lowcore.last_update_timer - timer; S390_lowcore.last_update_timer = expires; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index bade533..30ca85c 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -721,7 +721,7 @@ static int __init kvm_s390_init(void)

/* * guests can ask for up to 255+1 double words, we need a full page - * to hold the maximum amount of facilites. On the other hand, we + * to hold the maximum amount of facilities. On the other hand, we * only set facilities that are known to work in KVM. */ facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA); diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 9194a4b..73c47bd 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -311,7 +311,7 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu)

/* * a lot of B2 instructions are priviledged. We first check for - * the priviledges ones, that we can handle in the kernel. If the + * the privileged ones, that we can handle in the kernel. If the * kernel can handle this instruction, we check for the problem * state bit and (a) handle the instruction or (b) send a code 2 * program check. diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 2c57806..9217e33 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -392,7 +392,7 @@ void __kprobes do_protection_exception(struct pt_regs *regs, long pgm_int_code, { int fault;

- /* Protection exception is supressing, decrement psw address. */ + /* Protection exception is suppressing, decrement psw address. */ regs->psw.addr -= (pgm_int_code >> 16); /* * Check for low-address protection. This needs to be treated diff --git a/arch/score/Makefile b/arch/score/Makefile index d77dc63..974aefe 100644 --- a/arch/score/Makefile +++ b/arch/score/Makefile @@ -40,5 +40,5 @@ archclean: define archhelp echo ' vmlinux.bin - Raw binary boot image' echo - echo ' These will be default as apropriate for a configured platform.' + echo ' These will be default as appropriate for a configured platform.' endef diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 12fec72..1553d56 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -82,7 +82,7 @@ config SH_NO_BSS_INIT help If running in painfully slow environments, such as an RTL simulation or from remote memory via SHdebug, where the memory - can already be gauranteed to ber zeroed on boot, say Y. + can already be guaranteed to ber zeroed on boot, say Y.

For all other cases, say N. If this option seems perplexing, or you aren't sure, say N. diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index 78cf2ab..f63d323 100644 --- a/arch/sh/boards/mach-dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -51,7 +51,7 @@ */ #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)

-/* Return the hardware event's bit positon within the EMR/ESR */ +/* Return the hardware event's bit position within the EMR/ESR */ #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)

/* diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index fd4ff25..30ae2e4 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -936,7 +936,7 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) return; }

- /* read MAC address frome EEPROM */ + /* read MAC address from EEPROM */ for (i = 0; i < sizeof(pd->mac_addr); i++) { pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 4983a4d..5ede38c 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -61,7 +61,7 @@ #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */ #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */ #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */ - #define SH7751_PCICONF3_HD7 0x00800000 /* Single Funtion device */ + #define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */ #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */ #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */ #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index a09c77d..194231c 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -84,7 +84,7 @@ int __devinit register_pci_controller(struct pci_channel *hose) hose_tail = &hose->next;

/* - * Do not panic here but later - this might hapen before console init. + * Do not panic here but later - this might happen before console init. */ if (!hose->io_map_base) { printk(KERN_WARNING diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index c4e0b3d..822d608 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -186,7 +186,7 @@ typedef struct page *pgtable_t; /* * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still * happily generate {ld/st}.q pairs, requiring us to have 8-byte - * alignment to avoid traps. The kmalloc alignment is gauranteed by + * alignment to avoid traps. The kmalloc alignment is guaranteed by * virtue of L1_CACHE_BYTES, requiring this to only be special cased * for slab caches. */ diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h index b799fe7..0bce3d8 100644 --- a/arch/sh/include/asm/pgtable_32.h +++ b/arch/sh/include/asm/pgtable_32.h @@ -167,7 +167,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x) #endif

/* - * Mask of bits that are to be preserved accross pgprot changes. + * Mask of bits that are to be preserved across pgprot changes. */ #define _PAGE_CHG_MASK \ (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \ diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h index c48a9c3..95adc50 100644 --- a/arch/sh/include/asm/unaligned-sh4a.h +++ b/arch/sh/include/asm/unaligned-sh4a.h @@ -9,7 +9,7 @@ * struct. * * The same note as with the movli.l/movco.l pair applies here, as long - * as the load is gauranteed to be inlined, nothing else will hook in to + * as the load is guaranteed to be inlined, nothing else will hook in to * r0 and we get the return value for free. * * NOTE: Due to the fact we require r0 encoding, care should be taken to diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h index 5d9d4d5..6ce944e 100644 --- a/arch/sh/include/mach-common/mach/highlander.h +++ b/arch/sh/include/mach-common/mach/highlander.h @@ -24,7 +24,7 @@ #define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ #define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ #define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */ #define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ #define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ #define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ @@ -89,7 +89,7 @@ #define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ #define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ #define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */ #define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ #define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ #define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h index 0a80015..e04f75e 100644 --- a/arch/sh/include/mach-common/mach/r2d.h +++ b/arch/sh/include/mach-common/mach/r2d.h @@ -18,18 +18,18 @@ #define PA_DISPCTL 0xa4000008 /* Display Timing control */ #define PA_SDMPOW 0xa400000a /* SD Power control */ #define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ -#define PA_PCICD 0xa400000e /* PCI Extention detect control */ +#define PA_PCICD 0xa400000e /* PCI Extension detect control */ #define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */

#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ #define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ #define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ -#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_R2D1_EXTRST 0xa4000028 /* Extension Reset control */ #define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */

#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ #define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ -#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extension Reset control */ #define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ #define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */

diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c index dd0e0f2..8f63a26 100644 --- a/arch/sh/kernel/cpu/clock-cpg.c +++ b/arch/sh/kernel/cpu/clock-cpg.c @@ -67,7 +67,7 @@ int __init __deprecated cpg_clk_init(void) }

/* - * Placeholder for compatability, until the lazy CPUs do this + * Placeholder for compatibility, until the lazy CPUs do this * on their own. */ int __init __weak arch_clk_init(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 1656b8c..beba32b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -648,7 +648,7 @@ static void __init sh7786_usb_setup(void) * The following settings are necessary * for using the USB modules. * - * see "USB Inital Settings" for detail + * see "USB Initial Settings" for detail */ __raw_writel(USBINITVAL1, USBINITREG1); __raw_writel(USBINITVAL2, USBINITREG2); diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 64ea0b1..9197110 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -183,7 +183,7 @@ asmlinkage void do_softirq(void) );

/* - * Shouldnt happen, we returned above if in_interrupt(): + * Shouldn't happen, we returned above if in_interrupt(): */ WARN_ON_ONCE(softirq_count()); } diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 4f26716..58bff45 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -150,7 +150,7 @@ void __init check_for_initrd(void) }

/* - * If we got this far inspite of the boot loader's best efforts + * If we got this far in spite of the boot loader's best efforts * to the contrary, assume we actually have a valid initrd and * fix up the root dev. */ diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S index 2a62816..49aeabe 100644 --- a/arch/sh/lib64/copy_user_memcpy.S +++ b/arch/sh/lib64/copy_user_memcpy.S @@ -27,7 +27,7 @@ ! 2.: When there are two or three bytes in the last word of an 11-or-more ! bytes memory chunk to b copied, the rest of the word can be read ! without side effects. -! This could be easily changed by increasing the minumum size of +! This could be easily changed by increasing the minimum size of ! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, ! however, this would cost a few extra cyles on average. ! For SHmedia, the assumption is that any quadword can be read in its diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S index dd300c3..5d682e0 100644 --- a/arch/sh/lib64/memcpy.S +++ b/arch/sh/lib64/memcpy.S @@ -29,7 +29,7 @@ ! 2.: When there are two or three bytes in the last word of an 11-or-more ! bytes memory chunk to b copied, the rest of the word can be read ! without side effects. -! This could be easily changed by increasing the minumum size of +! This could be easily changed by increasing the minimum size of ! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, ! however, this would cost a few extra cyles on average. ! For SHmedia, the assumption is that any quadword can be read in its diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h index bafe5a6..7568640 100644 --- a/arch/sparc/include/asm/hypervisor.h +++ b/arch/sparc/include/asm/hypervisor.h @@ -654,7 +654,7 @@ extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, * ARG3: mmu context * ARG4: flags (HV_MMU_{IMMU,DMMU}) * RET0: status - * ERRORS: EINVAL Invalid virutal address, context, or + * ERRORS: EINVAL Invalid virtual address, context, or * flags value * ENOTSUPPORTED ARG0 or ARG1 is non-zero * @@ -721,7 +721,7 @@ extern void sun4v_mmu_demap_all(void); * ARG2: TTE * ARG3: flags (HV_MMU_{IMMU,DMMU}) * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value + * ERRORS: EINVAL Invalid virtual address or flags value * EBADPGSZ Invalid page size value * ENORADDR Invalid real address in TTE * ETOOMANY Too many mappings (max of 8 reached) @@ -800,7 +800,7 @@ extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, * ARG1: reserved, must be zero * ARG2: flags (HV_MMU_{IMMU,DMMU}) * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value + * ERRORS: EINVAL Invalid virtual address or flags value * ENOMAP Specified mapping was not found * * Demaps any permanent page mapping (established via @@ -1205,7 +1205,7 @@ struct hv_trap_trace_control { * structure contents. Attempts to do so will result in undefined * behavior for the guest. * - * Each trap trace buffer entry is layed out as follows: + * Each trap trace buffer entry is laid out as follows: */ #ifndef __ASSEMBLY__ struct hv_trap_trace_entry { @@ -1300,7 +1300,7 @@ struct hv_trap_trace_entry { * state in RET1. Future systems may define various flags for the * enable argument (ARG0), for the moment a guest should pass * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all - * tracing - which will ensure future compatability. + * tracing - which will ensure future compatibility. */ #define HV_FAST_TTRACE_ENABLE 0x92

@@ -1880,7 +1880,7 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, * pci_device, at pci_config_offset from the beginning of the device's * configuration space. If there was no error, RET1 is set to zero and * RET2 is set to the data read. Insignificant bits in RET2 are not - * guarenteed to have any specific value and therefore must be ignored. + * guaranteed to have any specific value and therefore must be ignored. * * The data returned in RET2 is size based byte swapped. * @@ -1941,9 +1941,9 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, * and return the actual data read in RET2. The data returned is size based * byte swapped. * - * Non-significant bits in RET2 are not guarenteed to have any specific value + * Non-significant bits in RET2 are not guaranteed to have any specific value * and therefore must be ignored. If RET1 is returned as non-zero, the data - * value is not guarenteed to have any specific value and should be ignored. + * value is not guaranteed to have any specific value and should be ignored. * * The caller must have permission to read from the given devhandle, real * address, which must be an IO address. The argument real address must be a @@ -2456,9 +2456,9 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, * * As receive queue configuration causes a reset of the queue's head and * tail pointers there is no way for a gues to determine how many entries - * have been received between a preceeding ldc_get_rx_state() API call + * have been received between a preceding ldc_get_rx_state() API call * and the completion of the configuration operation. It should be noted - * that datagram delivery is not guarenteed via domain channels anyway, + * that datagram delivery is not guaranteed via domain channels anyway, * and therefore any higher protocol should be resilient to datagram * loss if necessary. However, to overcome this specific race potential * it is recommended, for example, that a higher level protocol be employed diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h index 686defe..af75548 100644 --- a/arch/sparc/include/asm/ns87303.h +++ b/arch/sparc/include/asm/ns87303.h @@ -37,7 +37,7 @@ /* Power and Test Register (PTR) bits */ #define PTR_LPTB_IRQ7 0x08 #define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */ -#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */ +#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controls direction */ /* of the parallel port */

/* Function Control Register (FCR) bits */ diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h index 843e4fa..288d7be 100644 --- a/arch/sparc/include/asm/pcr.h +++ b/arch/sparc/include/asm/pcr.h @@ -31,7 +31,7 @@ extern unsigned int picl_shift;

/* In order to commonize as much of the implementation as * possible, we use PICH as our counter. Mostly this is - * to accomodate Niagara-1 which can only count insn cycles + * to accommodate Niagara-1 which can only count insn cycles * in PICH. */ static inline u64 picl_value(unsigned int nmi_hz) diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h index 30b0b79..c7ad3fe 100644 --- a/arch/sparc/include/asm/ptrace.h +++ b/arch/sparc/include/asm/ptrace.h @@ -33,7 +33,7 @@ struct pt_regs { * things like "in a system call" etc. for an arbitray * process. * - * The PT_REGS_MAGIC is choosen such that it can be + * The PT_REGS_MAGIC is chosen such that it can be * loaded completely using just a sethi instruction. */ unsigned int magic; diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index 1504df8..8e607b3 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -801,7 +801,7 @@ vac_linesize_patch_32: subcc %l7, 32, %l7 .globl vac_hwflush_patch1_on, vac_hwflush_patch2_on

/* - * Ugly, but we cant use hardware flushing on the sun4 and we'd require + * Ugly, but we can't use hardware flushing on the sun4 and we'd require * two instructions (Anton) */ vac_hwflush_patch1_on: addcc %l7, -PAGE_SIZE, %l7 @@ -851,7 +851,7 @@ sun4c_fault: sethi %hi(~((1 << SUN4C_REAL_PGDIR_SHIFT) - 1)), %l4

/* If the kernel references a bum kernel pointer, or a pte which - * points to a non existant page in ram, we will run this code + * points to a non existent page in ram, we will run this code * _forever_ and lock up the machine!!!!! So we must check for * this condition, the AC_SYNC_ERR bits are what we must examine. * Also a parity error would make this happen as well. So we just diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index f8f2105..aa594c7 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -85,7 +85,7 @@ sparc_ramdisk_image64: sparc64_boot: mov %o4, %l7

- /* We need to remap the kernel. Use position independant + /* We need to remap the kernel. Use position independent * code to remap us to KERNBASE. * * SILO can invoke us with 32-bit address masking enabled, diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c index 5fe3d65..35f141a 100644 --- a/arch/sparc/kernel/init_task.c +++ b/arch/sparc/kernel/init_task.c @@ -15,7 +15,7 @@ EXPORT_SYMBOL(init_task);

/* .text section in head.S is aligned at 8k boundary and this gets linked * right after that so that the init_thread_union is aligned properly as well. - * If this is not aligned on a 8k boundry, then you should change code + * If this is not aligned on a 8k boundary, then you should change code * in etrap.S which assumes it. */ union thread_union init_thread_union __init_task_data = diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 63cd4e5..5c14968 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -459,7 +459,7 @@ apply_interrupt_map(struct device_node *dp, struct device_node *pp, * * Handle this by deciding that, if we didn't get a * match in the parent's 'interrupt-map', and the - * parent is an IRQ translater, then use the parent as + * parent is an IRQ translator, then use the parent as * our IRQ controller. */ if (pp->irq_trans) diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 7605786..ee8426e 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1027,7 +1027,7 @@ static int sparc_pmu_add(struct perf_event *event, int ef_flags)

/* * If group events scheduling transaction was started, - * skip the schedulability test here, it will be peformed + * skip the schedulability test here, it will be performed * at commit time(->commit_txn) as a whole */ if (cpuc->group_flag & PERF_EVENT_TXN) diff --git a/arch/sparc/math-emu/Makefile b/arch/sparc/math-emu/Makefile index b9085ec..825dbee 100644 --- a/arch/sparc/math-emu/Makefile +++ b/arch/sparc/math-emu/Makefile @@ -2,7 +2,7 @@ # Makefile for the FPU instruction emulation. #

-# supress all warnings - as math.c produces a lot! +# suppress all warnings - as math.c produces a lot! ccflags-y := -w

obj-y := math_$(BITS).o diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 6e2cdd5..e32b0c2 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -51,7 +51,7 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool y

-# FIXME: tilegx can implement a more efficent rwsem. +# FIXME: tilegx can implement a more efficient rwsem. config RWSEM_GENERIC_SPINLOCK def_bool y

diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h index 146e47d..f13188a 100644 --- a/arch/tile/include/hv/drv_xgbe_intf.h +++ b/arch/tile/include/hv/drv_xgbe_intf.h @@ -319,7 +319,7 @@ typedef union * is an error code, or zero if no error. The val0 member is the * updated value of seqno; it has been incremented by 1 for each * packet sent. That increment may be less than nentries if an - * error occured, or if some of the entries in the vector contain + * error occurred, or if some of the entries in the vector contain * handles equal to NETIO_PKT_HANDLE_NONE. The val1 member is the * updated value of nentries; it has been decremented by 1 for each * vector entry processed. Again, that decrement may be less than diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h index 1b8bf03..ee41bca 100644 --- a/arch/tile/include/hv/hypervisor.h +++ b/arch/tile/include/hv/hypervisor.h @@ -1340,7 +1340,7 @@ typedef struct * this operation. If any permanent delivery errors were encountered, * the routine returns HV_ERECIP. In the event of permanent delivery * errors, it may be the case that delivery was not attempted to all - * recipients; if any messages were succesfully delivered, however, + * recipients; if any messages were successfully delivered, however, * recipients' state values will be updated appropriately. * * It is explicitly legal to specify a recipient structure whose state @@ -1359,7 +1359,7 @@ typedef struct * never call hv_receive_message, or could register a different state * buffer, losing the message. * - * Specifiying the same recipient more than once in the recipient list + * Specifying the same recipient more than once in the recipient list * is an error, which will not result in an error return but which may * or may not result in more than one message being delivered to the * recipient tile. diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index a1ee25b..ea38f0c 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -36,7 +36,7 @@ * Initialization flow and process * ------------------------------- * - * This files containes the routines to search for PCI buses, + * This files contains the routines to search for PCI buses, * enumerate the buses, and configure any attached devices. * * There are two entry points here: @@ -519,7 +519,7 @@ static int __devinit tile_cfg_read(struct pci_bus *bus,

/* - * See tile_cfg_read() for relevent comments. + * See tile_cfg_read() for relevant comments. * Note that "val" is the value to write, not a pointer to that value. */ static int __devinit tile_cfg_write(struct pci_bus *bus, diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c index 758f597..51f8663 100644 --- a/arch/tile/mm/fault.c +++ b/arch/tile/mm/fault.c @@ -290,7 +290,7 @@ static int handle_page_fault(struct pt_regs *regs, /* * Early on, we need to check for migrating PTE entries; * see homecache.c. If we find a migrating PTE, we wait until - * the backing page claims to be done migrating, then we procede. + * the backing page claims to be done migrating, then we proceed. * For kernel PTEs, we rewrite the PTE and return and retry. * Otherwise, we treat the fault like a normal "no PTE" fault, * rather than trying to patch up the existing PTE. diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c index 201a582..42cfcba 100644 --- a/arch/tile/mm/hugetlbpage.c +++ b/arch/tile/mm/hugetlbpage.c @@ -219,7 +219,7 @@ try_again: if (mm->free_area_cache < len) goto fail;

- /* either no address requested or cant fit in requested address hole */ + /* either no address requested or can't fit in requested address hole */ addr = (mm->free_area_cache - len) & huge_page_mask(h); do { /* diff --git a/arch/um/Kconfig.net b/arch/um/Kconfig.net index 9e9a4aa..3160b1a 100644 --- a/arch/um/Kconfig.net +++ b/arch/um/Kconfig.net @@ -186,7 +186,7 @@ config UML_NET_SLIRP other transports, SLiRP works without the need of root level privleges, setuid binaries, or SLIP devices on the host. This also means not every type of connection is possible, but most - situations can be accomodated with carefully crafted slirp + situations can be accommodated with carefully crafted slirp commands that can be passed along as part of the network device's setup string. The effect of this transport on the UML is similar that of a host behind a firewall that masquerades all network diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h index 885bb62..aa22df7 100644 --- a/arch/unicore32/include/mach/regs-umal.h +++ b/arch/unicore32/include/mach/regs-umal.h @@ -52,7 +52,7 @@ */ #define UMAL_MIISTATUS (PKUNITY_UMAL_BASE + 0x0030) /* - * MII Managment Indicator UMAL_MIIIDCT + * MII Management Indicator UMAL_MIIIDCT */ #define UMAL_MIIIDCT (PKUNITY_UMAL_BASE + 0x0034) /* @@ -91,7 +91,7 @@ #define UMAL_FIFORAM6 (PKUNITY_UMAL_BASE + 0x0078) #define UMAL_FIFORAM7 (PKUNITY_UMAL_BASE + 0x007c)

-/* MAHBE MODUEL OF UMAL */ +/* MAHBE MODULE OF UMAL */ /* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master * and Slave ports.Registers within the M-AHBE provide Control and Status * information concerning these transfers. diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S index 92255f3..8caf322 100644 --- a/arch/unicore32/kernel/head.S +++ b/arch/unicore32/kernel/head.S @@ -164,7 +164,7 @@ ENTRY(stext) ENDPROC(stext)

/* - * Enable the MMU. This completely changes the stucture of the visible + * Enable the MMU. This completely changes the structure of the visible * memory space. You will not be able to trace execution through this. * * r0 = cp#0 control register diff --git a/arch/xtensa/include/asm/dma.h b/arch/xtensa/include/asm/dma.h index 137ca39..bb099a3 100644 --- a/arch/xtensa/include/asm/dma.h +++ b/arch/xtensa/include/asm/dma.h @@ -37,7 +37,7 @@ * the size of the statically mapped kernel segment * (XCHAL_KSEG_{CACHED,BYPASS}_SIZE), ie. 128 MB. * - * NOTE: When the entire KSEG area is DMA capable, we substract + * NOTE: When the entire KSEG area is DMA capable, we subtract * one from the max address so that the virt_to_phys() macro * works correctly on the address (otherwise the address * enters another area, and virt_to_phys() may not return diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 5fd01f6..6223f33 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1026,7 +1026,7 @@ ENTRY(fast_syscall_unrecoverable) * TRY adds an entry to the __ex_table fixup table for the immediately * following instruction. * - * CATCH catches any exception that occurred at one of the preceeding TRY + * CATCH catches any exception that occurred at one of the preceding TRY * statements and continues from there * * Usage TRY l32i a0, a1, 0 diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 2bef570..f0605ab 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -868,7 +868,7 @@ static void blkio_update_policy_rule(struct blkio_policy_node *oldpn, }

/* - * Some rules/values in blkg have changed. Propogate those to respective + * Some rules/values in blkg have changed. Propagate those to respective * policies. */ static void blkio_update_blkg_policy(struct blkio_cgroup *blkcg, @@ -903,7 +903,7 @@ static void blkio_update_blkg_policy(struct blkio_cgroup *blkcg, }

/* - * A policy node rule has been updated. Propogate this update to all the + * A policy node rule has been updated. Propagate this update to all the * block groups which might be affected by this update. */ static void blkio_update_policy_node_blkg(struct blkio_cgroup *blkcg, diff --git a/block/blk-core.c b/block/blk-core.c index e0a0623..071ae6d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1184,7 +1184,7 @@ static bool bio_attempt_front_merge(struct request_queue *q,

/* * Attempts to merge with the plugged list in the current process. Returns - * true if merge was succesful, otherwise false. + * true if merge was successful, otherwise false. */ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, struct bio *bio) diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 5352bda..c8b16c8 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -916,7 +916,7 @@ static void throtl_update_blkio_group_common(struct throtl_data *td, /* * For all update functions, key should be a valid pointer because these * update functions are called under blkcg_lock, that means, blkg is - * valid and in turn key is valid. queue exit path can not race becuase + * valid and in turn key is valid. queue exit path can not race because * of blkcg_lock * * Can not take queue lock in update functions as queue lock under blkcg_lock diff --git a/block/blk.h b/block/blk.h index c8db371..6126346 100644 --- a/block/blk.h +++ b/block/blk.h @@ -32,7 +32,7 @@ enum rq_atomic_flags {

/* * EH timer and IO completion will both attempt to 'grab' the request, make - * sure that only one of them suceeds + * sure that only one of them succeeds */ static inline int blk_mark_rq_complete(struct request *rq) { diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 7785169..3be881e 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -888,7 +888,7 @@ cfq_group_notify_queue_add(struct cfq_data *cfqd, struct cfq_group *cfqg) /* * Currently put the group at the end. Later implement something * so that groups get lesser vtime based on their weights, so that - * if group does not loose all if it was not continously backlogged. + * if group does not loose all if it was not continuously backlogged. */ n = rb_last(&st->rb); if (n) { diff --git a/block/genhd.c b/block/genhd.c index c91a2da..b364bd0 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -739,7 +739,7 @@ void __init printk_all_partitions(void)

/* * Don't show empty devices or things that have been - * surpressed + * suppressed */ if (get_capacity(disk) == 0 || (disk->flags & GENHD_FL_SUPPRESS_PARTITION_INFO)) diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c index 2bc3321..ffa0245 100644 --- a/crypto/ansi_cprng.c +++ b/crypto/ansi_cprng.c @@ -83,7 +83,7 @@ static void xor_vectors(unsigned char *in1, unsigned char *in2, } /* * Returns DEFAULT_BLK_SZ bytes of random data per call - * returns 0 if generation succeded, <0 if something went wrong + * returns 0 if generation succeeded, <0 if something went wrong */ static int _get_more_prng_bytes(struct prng_context *ctx, int cont_test) { diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index 079ae8c..bc28337 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -94,7 +94,7 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list, if (unlikely(!tx)) async_tx_quiesce(&submit->depend_tx);

- /* spin wait for the preceeding transactions to complete */ + /* spin wait for the preceding transactions to complete */ while (unlikely(!tx)) { dma_async_issue_pending(chan); tx = dma->device_prep_dma_xor(chan, dma_dest, diff --git a/crypto/gf128mul.c b/crypto/gf128mul.c index a90d260..df35e4c 100644 --- a/crypto/gf128mul.c +++ b/crypto/gf128mul.c @@ -89,7 +89,7 @@ }

/* Given the value i in 0..255 as the byte overflow when a field element - in GHASH is multipled by x^8, this function will return the values that + in GHASH is multiplied by x^8, this function will return the values that are generated in the lo 16-bit word of the field value by applying the modular polynomial. The values lo_byte and hi_byte are returned via the macro xp_fun(lo_byte, hi_byte) so that the values can be assembled into diff --git a/crypto/vmac.c b/crypto/vmac.c index 0999274..f35ff8a 100644 --- a/crypto/vmac.c +++ b/crypto/vmac.c @@ -95,7 +95,7 @@ const u64 mpoly = UINT64_C(0x1fffffff1fffffff); /* Poly key mask */

/* * For highest performance the L1 NH and L2 polynomial hashes should be - * carefully implemented to take advantage of one's target architechture. + * carefully implemented to take advantage of one's target architecture. * Here these two hash functions are defined multiple time; once for * 64-bit architectures, once for 32-bit SSE2 architectures, and once * for the rest (32-bit) architectures. diff --git a/crypto/xts.c b/crypto/xts.c index 555ecaa..8517054 100644 --- a/crypto/xts.c +++ b/crypto/xts.c @@ -45,7 +45,7 @@ static int setkey(struct crypto_tfm *parent, const u8 *key, return -EINVAL; }

- /* we need two cipher instances: one to compute the inital 'tweak' + /* we need two cipher instances: one to compute the initial 'tweak' * by encrypting the IV (usually the 'plain' iv) and the other * one to encrypt and decrypt the data */

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d1d484d..f703b28 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -241,7 +241,7 @@ static inline int ghes_severity(int severity) case CPER_SEV_FATAL: return GHES_SEV_PANIC; default: - /* Unkown, go panic */ + /* Unknown, go panic */ return GHES_SEV_PANIC; } } diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index fa84e97..ad35017 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1164,7 +1164,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, */ if (!match_pr->flags.throttling) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Throttling Controll is unsupported " + "Throttling Control is unsupported " "on CPU %d\n", i)); continue; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 31e9e10..ec574fc 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1354,7 +1354,7 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video, status = acpi_video_bus_get_one_device(dev, video); if (ACPI_FAILURE(status)) { printk(KERN_WARNING PREFIX - "Cant attach device\n"); + "Can't attach device\n"); continue; } } @@ -1373,7 +1373,7 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) acpi_video_device_notify); if (ACPI_FAILURE(status)) { printk(KERN_WARNING PREFIX - "Cant remove video notify handler\n"); + "Can't remove video notify handler\n"); } if (device->backlight) { backlight_device_unregister(device->backlight); diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 6d2bb25..8210405 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -760,7 +760,7 @@ int amba_request_regions(struct amba_device *dev, const char *name) }

/** - * amba_release_regions - release mem regions assoicated with device + * amba_release_regions - release mem regions associated with device * @dev: amba_device structure for device * * Release regions claimed by a successful call to amba_request_regions. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index e62f693..39d829c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -926,7 +926,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev) /* * Acer eMachines G725 has the same problem. BIOS * V1.03 is known to be broken. V3.04 is known to - * work. Inbetween, there are V1.06, V2.06 and V3.03 + * work. Between, there are V1.06, V2.06 and V3.03 * that we don't have much idea about. For now, * blacklist anything older than V3.04. * diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index ccaf081..3986500 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -225,7 +225,7 @@ enum { /* em_ctl bits */ EM_CTL_RST = (1 << 9), /* Reset */ EM_CTL_TM = (1 << 8), /* Transmit Message */ - EM_CTL_MR = (1 << 0), /* Message Recieved */ + EM_CTL_MR = (1 << 0), /* Message Received */ EM_CTL_ALHD = (1 << 26), /* Activity LED */ EM_CTL_XMT = (1 << 25), /* Transmit Only */ EM_CTL_SMB = (1 << 24), /* Single Message Buffer */ @@ -281,7 +281,7 @@ struct ahci_port_priv { };

struct ahci_host_priv { - void __iomem * mmio; /* bus-independant mem map */ + void __iomem * mmio; /* bus-independent mem map */ unsigned int flags; /* AHCI_HFLAG_* */ u32 cap; /* cap to use */ u32 cap2; /* cap2 to use */ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index cdec4ab..0bc3fd6 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -38,16 +38,16 @@ * Hardware documentation available at http://developer.intel.com/ * * Documentation - * Publically available from Intel web site. Errata documentation - * is also publically available. As an aide to anyone hacking on this + * Publicly available from Intel web site. Errata documentation + * is also publicly available. As an aide to anyone hacking on this * driver the list of errata that are relevant is below, going back to * PIIX4. Older device documentation is now a bit tricky to find. * * The chipsets all follow very much the same design. The original Triton - * series chipsets do _not_ support independant device timings, but this + * series chipsets do _not_ support independent device timings, but this * is fixed in Triton II. With the odd mobile exception the chips then * change little except in gaining more modes until SATA arrives. This - * driver supports only the chips with independant timing (that is those + * driver supports only the chips with independent timing (that is those * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix * for the early chip drivers. * @@ -122,7 +122,7 @@ enum { P2 = 2, /* port 2 */ P3 = 3, /* port 3 */ IDE = -1, /* IDE */ - NA = -2, /* not avaliable */ + NA = -2, /* not available */ RV = -3, /* reserved */

PIIX_AHCI_DEVICE = 6, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index b91e19c..423c0a6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5340,7 +5340,7 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) * * Resume @host. Actual operation is performed by EH. This * function requests EH to perform PM operations and returns. - * Note that all resume operations are performed parallely. + * Note that all resume operations are performed parallelly. * * LOCKING: * Kernel thread context (may sleep). diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index df3f314..88cd22f 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -771,7 +771,7 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap) /* process port suspend request */ ata_eh_handle_port_suspend(ap);

- /* Exception might have happend after ->error_handler + /* Exception might have happened after ->error_handler * recovered the port but before this point. Repeat * EH in such case. */ @@ -1742,7 +1742,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link) * * Analyze taskfile of @qc and further determine cause of * failure. This function also requests ATAPI sense data if - * avaliable. + * available. * * LOCKING: * Kernel thread context (may sleep). @@ -1893,7 +1893,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) * occurred during last 5 mins, NCQ_OFF. * * 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors - * ocurred during last 5 mins, FALLBACK_TO_PIO + * occurred during last 5 mins, FALLBACK_TO_PIO * * 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred * during last 10 mins, NCQ_OFF. @@ -2577,7 +2577,7 @@ int ata_eh_reset(struct ata_link *link, int classify, if (link->flags & ATA_LFLAG_NO_SRST) softreset = NULL;

- /* make sure each reset attemp is at least COOL_DOWN apart */ + /* make sure each reset attempt is at least COOL_DOWN apart */ if (ehc->i.flags & ATA_EHI_DID_RESET) { now = jiffies; WARN_ON(time_after(ehc->last_reset, now)); @@ -2736,7 +2736,7 @@ int ata_eh_reset(struct ata_link *link, int classify, if (!reset) { ata_link_printk(link, KERN_ERR, "follow-up softreset required " - "but no softreset avaliable\n"); + "but no softreset available\n"); failed_link = link; rc = -EINVAL; goto fail; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a834199..e2f57e9e 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -999,7 +999,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) * @qc: Command that we are erroring out * * Generate sense block for a failed ATA command @qc. Descriptor - * format is used to accomodate LBA48 block address. + * format is used to accommodate LBA48 block address. * * LOCKING: * None. diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index cf7acbc..f8380ce 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2839,7 +2839,7 @@ unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc) bmdma_stopped = true;

if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ + /* error when transferring data to/from memory */ qc->err_mask |= AC_ERR_HOST_BUS; ap->hsm_task_state = HSM_ST_ERR; } @@ -3032,7 +3032,7 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) * Or maybe I'm just being paranoid. * * FIXME: The posting of this write means I/O starts are - * unneccessarily delayed for MMIO + * unnecessarily delayed for MMIO */ } EXPORT_SYMBOL_GPL(ata_bmdma_start); diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 620a07c..b0975a5 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -11,7 +11,7 @@ * Power management on ports * * - * Documentation publically available. + * Documentation publicly available. */

#include <linux/kernel.h> diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 65cee74..719bb73 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -385,7 +385,7 @@ static inline int wait4buf(struct arasan_cf_dev *acdev) return -ETIMEDOUT; }

- /* Check if PIO Error interrupt has occured */ + /* Check if PIO Error interrupt has occurred */ if (acdev->dma_status & ATA_DMA_ERR) return -EAGAIN;

@@ -450,7 +450,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg) /* * For each sg: * MAX_XFER_COUNT data will be transferred before we get transfer - * complete interrupt. Inbetween after FIFO_SIZE data + * complete interrupt. Between after FIFO_SIZE data * buffer available interrupt will be generated. At this time we will * fill FIFO again: max FIFO_SIZE data. */ @@ -463,7 +463,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg) acdev->vbase + XFER_CTR); spin_unlock_irqrestore(&acdev->host->lock, flags);

- /* continue dma xfers untill current sg is completed */ + /* continue dma xfers until current sg is completed */ while (xfer_cnt) { /* wait for read to complete */ if (!write) { @@ -563,7 +563,7 @@ static void data_xfer(struct work_struct *work)

chan_request_fail: spin_lock_irqsave(&acdev->host->lock, flags); - /* error when transfering data to/from memory */ + /* error when transferring data to/from memory */ qc->err_mask |= AC_ERR_HOST_BUS; qc->ap->hsm_task_state = HSM_ST_ERR;

diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index e0b58b8..ea64967 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1342,7 +1342,7 @@ static unsigned int bfin_ata_host_intr(struct ata_port *ap, ap->ops->bmdma_stop(qc);

if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ + /* error when transferring data to/from memory */ qc->err_mask |= AC_ERR_HOST_BUS; ap->hsm_task_state = HSM_ST_ERR; } diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 030952f..e3254fc 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -29,7 +29,7 @@ * General Public License for more details. * * Documentation: - * Not publically available. + * Not publicly available. */ #include <linux/kernel.h> #include <linux/module.h> diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index b21f002..d8d9c58 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -15,7 +15,7 @@ * with PCI IDE and also that we do not disable the device when our driver is * unloaded (as it has many other functions). * - * The driver conciously keeps this logic internally to avoid pushing quirky + * The driver consciously keeps this logic internally to avoid pushing quirky * PATA history into the clean libata layer. * * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 4a454a8..4d04471 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -112,7 +112,7 @@ static int rz1000_reinit_one(struct pci_dev *pdev) if (rc) return rc;

- /* If this fails on resume (which is a "cant happen" case), we + /* If this fails on resume (which is a "can't happen" case), we must stop as any progress risks data loss */ if (rz1000_fifo_disable(pdev)) panic("rz1000 fifo"); diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 00eefbd..118787c 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -11,7 +11,7 @@ * * May be copied or modified under the terms of the GNU General Public License * - * Documentation publically available. + * Documentation publicly available. * * If you have strange problems with nVidia chipset systems please * see the SI support documentation and update your system BIOS @@ -43,7 +43,7 @@ * * Turn a config register offset into the right address in either * PCI space or MMIO space to access the control register in question - * Thankfully this is a configuration operation so isnt performance + * Thankfully this is a configuration operation so isn't performance * criticial. */

diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index c04abc3..be08ff9 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -331,7 +331,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)

if (adev->dma_mode < XFER_UDMA_0) { /* bits 3-0 hold recovery timing bits 8-10 active timing and - the higher bits are dependant on the device */ + the higher bits are dependent on the device */ timing &= ~0x870F; timing |= mwdma_bits[speed]; } else { @@ -371,7 +371,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)

if (adev->dma_mode < XFER_UDMA_0) { /* bits 3-0 hold recovery timing bits 8-10 active timing and - the higher bits are dependant on the device, bit 15 udma */ + the higher bits are dependent on the device, bit 15 udma */ timing &= ~0x870F; timing |= mwdma_bits[speed]; } else { diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index 0d1f89e..03b6d69 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -30,7 +30,7 @@ * Loosely based on the piix & svwks drivers. * * Documentation: - * Not publically available. + * Not publicly available. */

#include <linux/kernel.h> diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 0f91e58..35a71d8 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -42,7 +42,7 @@ enum {

/* * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and - * chained indirect PRDEs upto a max count of 63. + * chained indirect PRDEs up to a max count of 63. * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will * be setup as an indirect descriptor, pointing to it's next * (contiguous) PRDE. Though chained indirect PRDE arrays are @@ -907,7 +907,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, ata_msleep(ap, 1);

/* - * SATA device enters reset state after receving a Control register + * SATA device enters reset state after receiving a Control register * FIS with SRST bit asserted and it awaits another H2D Control reg. * FIS with SRST bit cleared, then the device does internal diags & * initialization, followed by indicating it's initialization status diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index cd40651..b52c051 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1352,7 +1352,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) /* * Workaround for 88SX60x1 FEr SATA#26: * - * COMRESETs have to take care not to accidently + * COMRESETs have to take care not to accidentally * put the drive to sleep when writing SCR_CONTROL. * Setting bits 12..15 prevents this problem. * @@ -2044,7 +2044,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)

cw = &pp->crqb[in_index].ata_cmd[0];

- /* Sadly, the CRQB cannot accomodate all registers--there are + /* Sadly, the CRQB cannot accommodate all registers--there are * only 11 bytes...so we must pick and choose required * registers based on the command. So, we drop feature and * hob_feature for [RW] DMA commands, but they are needed for diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 42344e3..f173ef3 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -2121,7 +2121,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)

host_stat = ap->ops->bmdma_status(ap); if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ + /* error when transferring data to/from memory */ ata_ehi_clear_desc(ehi); ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); ehi->err_mask |= AC_ERR_HOST_BUS; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 21242c5..54434db 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -582,7 +582,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id) * When host issues HOLD, device may send up to 20DW of data * before acknowledging it with HOLDA and the host should be * able to buffer them in FIFO. Unfortunately, some WD drives - * send upto 40DW before acknowledging HOLD and, in the + * send up to 40DW before acknowledging HOLD and, in the * default configuration, this ends up overflowing vt6421's * FIFO, making the controller abort the transaction with * R_ERR. diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c index 9f47e86..a5fcb1e 100644 --- a/drivers/atm/ambassador.c +++ b/drivers/atm/ambassador.c @@ -497,7 +497,7 @@ static void rx_complete (amb_dev * dev, rx_out * rx) { // VC layer stats atomic_inc(&atm_vcc->stats->rx); __net_timestamp(skb); - // end of our responsability + // end of our responsibility atm_vcc->push (atm_vcc, skb); return; diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 049650d..ef7a658 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1782,7 +1782,7 @@ static int __devinit fs_init (struct fs_dev *dev) write_fs (dev, RAS0, RAS0_DCD_XHLT | (((1 << FS155_VPI_BITS) - 1) * RAS0_VPSEL) | (((1 << FS155_VCI_BITS) - 1) * RAS0_VCSEL)); - /* We can chose the split arbitarily. We might be able to + /* We can chose the split arbitrarily. We might be able to support more. Whatever. This should do for now. */ dev->atm_dev->ci_range.vpi_bits = FS155_VPI_BITS; dev->atm_dev->ci_range.vci_bits = FS155_VCI_BITS; diff --git a/drivers/atm/fore200e.h b/drivers/atm/fore200e.h index 7f97c09..ba34a02 100644 --- a/drivers/atm/fore200e.h +++ b/drivers/atm/fore200e.h @@ -263,7 +263,7 @@ typedef enum opcode { } opcode_t;

-/* virtual path / virtual channel identifers */ +/* virtual path / virtual channel identifiers */

typedef struct vpvc { BITFIELD3( @@ -926,7 +926,7 @@ typedef struct fore200e_vcc {

#define PCA200E_PCI_LATENCY 0x40 /* maximum slave latenty */ #define PCA200E_PCI_MASTER_CTRL 0x41 /* master control */ -#define PCA200E_PCI_THRESHOLD 0x42 /* burst / continous req threshold */ +#define PCA200E_PCI_THRESHOLD 0x42 /* burst / continuous req threshold */

/* PBI master control register */

diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index 24761e1..d58e3fc 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -169,13 +169,13 @@ static inline void __init show_version (void) { Real Time (cdv and max CDT given)

CBR(pcr) pcr bandwidth always available - rtVBR(pcr,scr,mbs) scr bandwidth always available, upto pcr at mbs too + rtVBR(pcr,scr,mbs) scr bandwidth always available, up to pcr at mbs too

Non Real Time

- nrtVBR(pcr,scr,mbs) scr bandwidth always available, upto pcr at mbs too + nrtVBR(pcr,scr,mbs) scr bandwidth always available, up to pcr at mbs too UBR() - ABR(mcr,pcr) mcr bandwidth always available, upto pcr (depending) too + ABR(mcr,pcr) mcr bandwidth always available, up to pcr (depending) too

mbs is max burst size (bucket) pcr and scr have associated cdvt values @@ -944,7 +944,7 @@ static void hrz_close_rx (hrz_dev * dev, u16 vc) { // to be fixed soon, so do not define TAILRECUSRIONWORKS unless you // are sure it does as you may otherwise overflow the kernel stack.

-// giving this fn a return value would help GCC, alledgedly +// giving this fn a return value would help GCC, allegedly

static void rx_schedule (hrz_dev * dev, int irq) { unsigned int rx_bytes; @@ -1036,7 +1036,7 @@ static void rx_schedule (hrz_dev * dev, int irq) { // VC layer stats atomic_inc(&vcc->stats->rx); __net_timestamp(skb); - // end of our responsability + // end of our responsibility vcc->push (vcc, skb); } } diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index bfb7fee..048f99f 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -3495,7 +3495,7 @@ init_card(struct atm_dev *dev) return -1; } if (dev->phy->ioctl == NULL) { - printk("%s: LT had no IOCTL funtion defined.\n", card->name); + printk("%s: LT had no IOCTL function defined.\n", card->name); deinit_card(card); return -1; } diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h index f53a43a..3a82cc2 100644 --- a/drivers/atm/idt77252.h +++ b/drivers/atm/idt77252.h @@ -766,7 +766,7 @@ struct idt77252_dev #define SAR_RCTE_BUFFSTAT_MASK 0x00003000 /* buffer status */ #define SAR_RCTE_EFCI 0x00000800 /* EFCI Congestion flag */ #define SAR_RCTE_CLP 0x00000400 /* Cell Loss Priority flag */ -#define SAR_RCTE_CRC 0x00000200 /* Recieved CRC Error */ +#define SAR_RCTE_CRC 0x00000200 /* Received CRC Error */ #define SAR_RCTE_CELLCNT_MASK 0x000001FF /* cell Count */

#define SAR_RCTE_AAL0 0x00000000 /* AAL types for ALL field */ diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index d80d51b..1c674a9 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -1025,7 +1025,7 @@ static void desc_dbg(IADEV *iadev) { }

-/*----------------------------- Recieving side stuff --------------------------*/ +/*----------------------------- Receiving side stuff --------------------------*/

static void rx_excp_rcvd(struct atm_dev *dev) { @@ -1195,7 +1195,7 @@ static void rx_intr(struct atm_dev *dev) if (status & RX_PKT_RCVD) { /* do something */ - /* Basically recvd an interrupt for receving a packet. + /* Basically recvd an interrupt for receiving a packet. A descriptor would have been written to the packet complete queue. Get all the descriptors and set up dma to move the packets till the packet complete queue is empty.. @@ -1855,7 +1855,7 @@ static int open_tx(struct atm_vcc *vcc) return -EINVAL; } if (vcc->qos.txtp.max_pcr > iadev->LineRate) { - IF_CBR(printk("PCR is not availble\n");) + IF_CBR(printk("PCR is not available\n");) return -1; } vc->type = CBR; diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index 52880c8..4e8ba56 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -1255,7 +1255,7 @@ static inline void lanai_endtx(struct lanai_dev *lanai, /* * Since the "butt register" is a shared resounce on the card we * serialize all accesses to it through this spinlock. This is - * mostly just paranoia sicne the register is rarely "busy" anyway + * mostly just paranoia since the register is rarely "busy" anyway * but is needed for correctness. */ spin_lock(&lanai->endtxlock); @@ -1990,7 +1990,7 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai)

/* * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll - * get a CBRZERO interrupt), and we can use it only if noone is receiving + * get a CBRZERO interrupt), and we can use it only if no one is receiving * AAL0 traffic (since they will use the same queue) - according to the * docs we shouldn't even use it for AAL0 traffic */ diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c index 4975859..41ce4bd 100644 --- a/drivers/auxdisplay/cfag12864b.c +++ b/drivers/auxdisplay/cfag12864b.c @@ -49,7 +49,7 @@ static unsigned int cfag12864b_rate = CONFIG_CFAG12864B_RATE; module_param(cfag12864b_rate, uint, S_IRUGO); MODULE_PARM_DESC(cfag12864b_rate, - "Refresh rate (hertzs)"); + "Refresh rate (hertz)");

unsigned int cfag12864b_getrate(void) { @@ -60,7 +60,7 @@ unsigned int cfag12864b_getrate(void) * cfag12864b Commands * * E = Enable signal - * Everytime E switch from low to high, + * Every time E switch from low to high, * cfag12864b/ks0108 reads the command/data. * * CS1 = First ks0108controller. diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 54597c8..3172c60 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -443,7 +443,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) * * Check if the device's run-time PM status allows it to be resumed. Cancel * any scheduled or pending requests. If another resume has been started - * earlier, either return imediately or wait for it to finish, depending on the + * earlier, either return immediately or wait for it to finish, depending on the * RPM_NOWAIT and RPM_ASYNC flags. Similarly, if there's a suspend running in * parallel with this function, either tell the other process to resume after * suspending (deferred_resume) or wait for it to finish. If the RPM_ASYNC diff --git a/drivers/base/sys.c b/drivers/base/sys.c index fbe72da..acde9b5 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -197,7 +197,7 @@ kset_put: }

/** - * sysdev_driver_register - Register auxillary driver + * sysdev_driver_register - Register auxiliary driver * @cls: Device class driver belongs to. * @drv: Driver. * @@ -250,7 +250,7 @@ unlock: }

/** - * sysdev_driver_unregister - Remove an auxillary driver. + * sysdev_driver_unregister - Remove an auxiliary driver. * @cls: Class driver belongs to. * @drv: Driver. */ @@ -302,7 +302,7 @@ int sysdev_register(struct sys_device *sysdev) * code that should have called us. */

- /* Notify class auxillary drivers */ + /* Notify class auxiliary drivers */ list_for_each_entry(drv, &cls->drivers, entry) { if (drv->add) drv->add(sysdev); @@ -335,7 +335,7 @@ void sysdev_unregister(struct sys_device *sysdev) * * Loop over each class of system devices, and the devices in each * of those classes. For each device, we call the shutdown method for - * each driver registered for the device - the auxillaries, + * each driver registered for the device - the auxiliaries, * and the class driver. * * Note: The list is iterated in reverse order, so that we shut down @@ -360,7 +360,7 @@ void sysdev_shutdown(void) struct sysdev_driver *drv; pr_debug(" %s\n", kobject_name(&sysdev->kobj));

- /* Call auxillary drivers first */ + /* Call auxiliary drivers first */ list_for_each_entry(drv, &cls->drivers, entry) { if (drv->shutdown) drv->shutdown(sysdev); @@ -385,7 +385,7 @@ static void __sysdev_resume(struct sys_device *dev) WARN_ONCE(!irqs_disabled(), "Interrupts enabled after %pF\n", cls->resume);

- /* Call auxillary drivers next. */ + /* Call auxiliary drivers next. */ list_for_each_entry(drv, &cls->drivers, entry) { if (drv->resume) drv->resume(dev); @@ -432,7 +432,7 @@ int sysdev_suspend(pm_message_t state) list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) { pr_debug(" %s\n", kobject_name(&sysdev->kobj));

- /* Call auxillary drivers first */ + /* Call auxiliary drivers first */ list_for_each_entry(drv, &cls->drivers, entry) { if (drv->suspend) { ret = drv->suspend(sysdev, state); diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 7988210..8066d08 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -1790,7 +1790,7 @@ static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T unsigned short LogicalDeviceNumber = 0; int ModelNameLength;

- /* Get data into dma-able area, then copy into permanant location */ + /* Get data into dma-able area, then copy into permanent location */ if (!DAC960_V2_NewControllerInfo(Controller)) return DAC960_Failure(Controller, "GET CONTROLLER INFO"); memcpy(ControllerInfo, Controller->V2.NewControllerInformation, diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index 2a1642b..c6828b6 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -30,7 +30,7 @@

/* We maintain a trivial check sum in our on disk activity log. * With that we can ensure correct operation even when the storage - * device might do a partial (last) sector write while loosing power. + * device might do a partial (last) sector write while losing power. */ struct __packed al_transaction { u32 magic; diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 81030d8..b2699bb 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -622,7 +622,7 @@ DCBP_set_pad_bits(struct p_compressed_bm *p, int n) /* one bitmap packet, including the p_header, * should fit within one _architecture independend_ page. * so we need to use the fixed size 4KiB page size - * most architechtures have used for a long time. + * most architectures have used for a long time. */ #define BM_PACKET_PAYLOAD_BYTES (4096 - sizeof(struct p_header80)) #define BM_PACKET_WORDS (BM_PACKET_PAYLOAD_BYTES/sizeof(long)) @@ -810,7 +810,7 @@ enum {

/* global flag bits */ enum { - CREATE_BARRIER, /* next P_DATA is preceeded by a P_BARRIER */ + CREATE_BARRIER, /* next P_DATA is preceded by a P_BARRIER */ SIGNAL_ASENDER, /* whether asender wants to be interrupted */ SEND_PING, /* whether asender should send a ping asap */

@@ -1126,7 +1126,7 @@ struct drbd_conf { int c_sync_rate; /* current resync rate after syncer throttle magic */ struct fifo_buffer rs_plan_s; /* correction values of resync planer */ int rs_in_flight; /* resync sectors in flight (to proxy, in proxy and from proxy) */ - int rs_planed; /* resync sectors already planed */ + int rs_planed; /* resync sectors already planned */ atomic_t ap_in_flight; /* App sectors in flight (waiting for ack) */ };

@@ -1144,7 +1144,7 @@ static inline unsigned int mdev_to_minor(struct drbd_conf *mdev) return mdev->minor; }

-/* returns 1 if it was successfull, +/* returns 1 if it was successful, * returns 0 if there was no data socket. * so wherever you are going to use the data.socket, e.g. do * if (!drbd_get_data_sock(mdev)) @@ -2079,7 +2079,7 @@ static inline void inc_ap_pending(struct drbd_conf *mdev) /* counts how many resync-related answers we still expect from the peer * increase decrease * C_SYNC_TARGET sends P_RS_DATA_REQUEST (and expects P_RS_DATA_REPLY) - * C_SYNC_SOURCE sends P_RS_DATA_REPLY (and expects P_WRITE_ACK whith ID_SYNCER) + * C_SYNC_SOURCE sends P_RS_DATA_REPLY (and expects P_WRITE_ACK with ID_SYNCER) * (or P_NEG_ACK with ID_SYNCER) */ static inline void inc_rs_pending(struct drbd_conf *mdev) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index dfc85f3..5b525c1 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1561,7 +1561,7 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, if (drbd_send_state(mdev)) dev_warn(DEV, "Notified peer that I'm now diskless.\n"); /* corresponding get_ldev in __drbd_set_state - * this may finaly trigger drbd_ldev_destroy. */ + * this may finally trigger drbd_ldev_destroy. */ put_ldev(mdev); }

@@ -3706,7 +3706,7 @@ int drbd_md_read(struct drbd_conf *mdev, struct drbd_backing_dev *bdev) buffer = (struct meta_data_on_disk *)page_address(mdev->md_io_page);

if (!drbd_md_sync_page_io(mdev, bdev, bdev->md.md_offset, READ)) { - /* NOTE: cant do normal error processing here as this is + /* NOTE: can't do normal error processing here as this is called BEFORE disk is attached */ dev_err(DEV, "Error while reading metadata.\n"); rv = ERR_IO_MD_DISK; diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index fe1564c..fd26666 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -862,7 +862,7 @@ retry: msock->sk->sk_rcvtimeo = mdev->net_conf->ping_int*HZ;

/* we don't want delays. - * we use TCP_CORK where apropriate, though */ + * we use TCP_CORK where appropriate, though */ drbd_tcp_nodelay(sock); drbd_tcp_nodelay(msock);

diff --git a/drivers/block/drbd/drbd_vli.h b/drivers/block/drbd/drbd_vli.h index fc82400..8cb1532 100644 --- a/drivers/block/drbd/drbd_vli.h +++ b/drivers/block/drbd/drbd_vli.h @@ -32,7 +32,7 @@ * the bitmap transfer time can take much too long, * if transmitted in plain text. * - * We try to reduce the transfered bitmap information + * We try to reduce the transferred bitmap information * by encoding runlengths of bit polarity. * * We never actually need to encode a "zero" (runlengths are positive). diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 30ec6b3..007c630 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -733,7 +733,7 @@ static int __init hd_init(void) * the BIOS or CMOS. This doesn't work all that well, * since this assumes that this is a primary or secondary * drive, and if we're using this legacy driver, it's - * probably an auxilliary controller added to recover + * probably an auxiliary controller added to recover * legacy data off an ST-506 drive. Either way, it's * definitely safest to have the user explicitly specify * the information. diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index e2ff697..9a5b2a2 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -94,7 +94,7 @@ static const struct vio_error_entry viodasd_err_table[] = { { 0x0204, EIO, "Use Error" }, { 0x0205, EIO, "Release Error" }, { 0x0206, EINVAL, "Invalid Disk" }, - { 0x0207, EBUSY, "Cant Lock" }, + { 0x0207, EBUSY, "Can't Lock" }, { 0x0208, EIO, "Already Locked" }, { 0x0209, EIO, "Already Unlocked" }, { 0x020A, EIO, "Invalid Arg" }, diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 73354b0..645ff76 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -621,7 +621,7 @@ static void ace_fsm_dostate(struct ace_device *ace) ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */

if (ace->data_result) { - /* Error occured, disable the disk */ + /* Error occurred, disable the disk */ ace->media_change = 1; set_capacity(ace->gd, 0); dev_err(ace->dev, "error fetching CF id (%i)\n", @@ -801,7 +801,7 @@ static int ace_interrupt_checkstate(struct ace_device *ace) u32 sreg = ace_in32(ace, ACE_STATUS); u16 creg = ace_in(ace, ACE_CTRL);

- /* Check for error occurance */ + /* Check for error occurrence */ if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) && (creg & ACE_CTRL_ERRORIRQ)) { dev_err(ace->dev, "transfer failure\n"); @@ -1169,7 +1169,7 @@ static int __devinit ace_probe(struct platform_device *dev) irq = dev->resource[i].start; }

- /* Call the bus-independant setup code */ + /* Call the bus-independent setup code */ return ace_alloc(&dev->dev, id, physaddr, irq, bus_width); }

@@ -1222,7 +1222,7 @@ static int __devinit ace_of_probe(struct platform_device *op) if (of_find_property(op->dev.of_node, "8-bit", NULL)) bus_width = ACE_BUS_WIDTH_8;

- /* Call the bus-independant setup code */ + /* Call the bus-independent setup code */ return ace_alloc(&op->dev, id ? be32_to_cpup(id) : 0, physaddr, irq, bus_width); } diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c index 38595e7..7e4b435 100644 --- a/drivers/bluetooth/hci_ll.c +++ b/drivers/bluetooth/hci_ll.c @@ -207,7 +207,7 @@ static void ll_device_want_to_wakeup(struct hci_uart *hu) /* * This state means that both the host and the BRF chip * have simultaneously sent a wake-up-indication packet. - * Traditionaly, in this case, receiving a wake-up-indication + * Traditionally, in this case, receiving a wake-up-indication * was enough and an additional wake-up-ack wasn't needed. * This has changed with the BRF6350, which does require an * explicit wake-up-ack. Other BRF versions, which do not diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index e2c48a7..514dd8e 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -30,7 +30,7 @@ changelog for the 1.x series, David?

2.00 Dec 2, 1997 -- Erik Andersen andersee@debian.org - -- New maintainer! As David A. van Leeuwen has been too busy to activly + -- New maintainer! As David A. van Leeuwen has been too busy to actively maintain and improve this driver, I am now carrying on the torch. If you have a problem with this driver, please feel free to contact me.

@@ -2520,7 +2520,7 @@ static int cdrom_ioctl_drive_status(struct cdrom_device_info *cdi, /* * Ok, this is where problems start. The current interface for the * CDROM_DISC_STATUS ioctl is flawed. It makes the false assumption that - * CDs are all CDS_DATA_1 or all CDS_AUDIO, etc. Unfortunatly, while this + * CDs are all CDS_DATA_1 or all CDS_AUDIO, etc. Unfortunately, while this * is often the case, it is also very common for CDs to have some tracks * with data, and some tracks with audio. Just because I feel like it, * I declare the following to be the best way to cope. If the CD has ANY diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 3e67ddd..923f99d 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -237,7 +237,7 @@ extern int agp_try_unsupported_boot;

long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg);

-/* Chipset independant registers (from AGP Spec) */ +/* Chipset independent registers (from AGP Spec) */ #define AGP_APBASE 0x10

#define AGPSTAT 0x4 diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index 45681c0..f7e8878 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -272,7 +272,7 @@ static void amd_irongate_cleanup(void) * This routine could be implemented by taking the addresses * written to the GATT, and flushing them individually. However * currently it just flushes the whole table. Which is probably - * more efficent, since agp_memory blocks can be a large number of + * more efficient, since agp_memory blocks can be a large number of * entries. */

diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index 13acaaf..f02f9b0 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -229,7 +229,7 @@ static int serverworks_fetch_size(void) * This routine could be implemented by taking the addresses * written to the GATT, and flushing them individually. However * currently it just flushes the whole table. Which is probably - * more efficent, since agp_memory blocks can be a large number of + * more efficient, since agp_memory blocks can be a large number of * entries. */ static void serverworks_tlbflush(struct agp_memory *temp) diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c index df67e80..8bc3849 100644 --- a/drivers/char/agp/via-agp.c +++ b/drivers/char/agp/via-agp.c @@ -400,7 +400,7 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata = * the traditional AGP which resides only in chipset. AGP is used * by 3D driver which wasn't available for the VT3336 and VT3364 * generation until now. Unfortunately, by testing, VT3364 works - * but VT3336 doesn't. - explaination from via, just leave this as + * but VT3336 doesn't. - explanation from via, just leave this as * as a placeholder to avoid future patches adding it back in. */ #if 0 diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c index 0dec5da..2efa176 100644 --- a/drivers/char/ipmi/ipmi_poweroff.c +++ b/drivers/char/ipmi/ipmi_poweroff.c @@ -122,7 +122,7 @@ static struct ipmi_recv_msg halt_recv_msg = {

/* - * Code to send a message and wait for the reponse. + * Code to send a message and wait for the response. */

static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index d28b484..cc6c9b2 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -339,7 +339,7 @@ static void return_hosed_msg(struct smi_info *smi_info, int cCode) cCode = IPMI_ERR_UNSPECIFIED; /* else use it as is */

- /* Make it a reponse */ + /* Make it a response */ msg->rsp[0] = msg->data[0] | 4; msg->rsp[1] = msg->data[1]; msg->rsp[2] = cCode; @@ -2927,7 +2927,7 @@ static void return_hosed_msg_badsize(struct smi_info *smi_info) { struct ipmi_smi_msg *msg = smi_info->curr_msg;

- /* Make it a reponse */ + /* Make it a response */ msg->rsp[0] = msg->data[0] | 4; msg->rsp[1] = msg->data[1]; msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH; diff --git a/drivers/char/mbcs.h b/drivers/char/mbcs.h index ba67158..1a36884 100644 --- a/drivers/char/mbcs.h +++ b/drivers/char/mbcs.h @@ -36,13 +36,13 @@ #define MBCS_RD_DMA_CTRL 0x0110 /* Read DMA Control */ #define MBCS_RD_DMA_AMO_DEST 0x0118 /* Read DMA AMO Destination */ #define MBCS_RD_DMA_INT_DEST 0x0120 /* Read DMA Interrupt Destination */ -#define MBCS_RD_DMA_AUX_STAT 0x0130 /* Read DMA Auxillary Status */ +#define MBCS_RD_DMA_AUX_STAT 0x0130 /* Read DMA Auxiliary Status */ #define MBCS_WR_DMA_SYS_ADDR 0x0200 /* Write DMA System Address */ #define MBCS_WR_DMA_LOC_ADDR 0x0208 /* Write DMA Local Address */ #define MBCS_WR_DMA_CTRL 0x0210 /* Write DMA Control */ #define MBCS_WR_DMA_AMO_DEST 0x0218 /* Write DMA AMO Destination */ #define MBCS_WR_DMA_INT_DEST 0x0220 /* Write DMA Interrupt Destination */ -#define MBCS_WR_DMA_AUX_STAT 0x0230 /* Write DMA Auxillary Status */ +#define MBCS_WR_DMA_AUX_STAT 0x0230 /* Write DMA Auxiliary Status */ #define MBCS_ALG_AMO_DEST 0x0300 /* Algorithm AMO Destination */ #define MBCS_ALG_INT_DEST 0x0308 /* Algorithm Interrupt Destination */ #define MBCS_ALG_OFFSETS 0x0310 diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h index 270431c..fba6ab1 100644 --- a/drivers/char/mwave/3780i.h +++ b/drivers/char/mwave/3780i.h @@ -122,7 +122,7 @@ typedef struct { typedef struct { unsigned char Dma:3; /* RW: DMA channel selection */ unsigned char NumTransfers:2; /* RW: Maximum # of transfers once being granted the ISA bus */ - unsigned char ReRequest:2; /* RW: Minumum delay between releasing the ISA bus and requesting it again */ + unsigned char ReRequest:2; /* RW: Minimum delay between releasing the ISA bus and requesting it again */ unsigned char MEMCS16:1; /* RW: ISA signal MEMCS16: 0=disabled, 1=enabled */ } DSP_BUSMASTER_CFG_1;

diff --git a/drivers/char/nwbutton.c b/drivers/char/nwbutton.c index 8994ce3..04a480f 100644 --- a/drivers/char/nwbutton.c +++ b/drivers/char/nwbutton.c @@ -75,7 +75,7 @@ int button_add_callback (void (*callback) (void), int count) * with -EINVAL. If there is more than one entry with the same address, * because it searches the list from end to beginning, it will unregister the * last one to be registered first (FILO- First In Last Out). - * Note that this is not neccessarily true if the entries are not submitted + * Note that this is not necessarily true if the entries are not submitted * at the same time, because another driver could have unregistered a callback * between the submissions creating a gap earlier in the list, which would * be filled first at submission time. diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index bcbbc71..90bd016 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -806,7 +806,7 @@ static void monitor_card(unsigned long p) dev->flags1 = 0x01; xoutb(dev->flags1, REG_FLAGS1(iobase));

- /* atr is present (which doesnt mean it's valid) */ + /* atr is present (which doesn't mean it's valid) */ set_bit(IS_ATR_PRESENT, &dev->flags); if (dev->atr[0] == 0x03) str_invert_revert(dev->atr, dev->atr_len); diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index beca80b..b575411 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -1290,7 +1290,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty) /* Allocate and claim adapter resources */ retval = claim_resources(info);

- /* perform existance check and diagnostics */ + /* perform existence check and diagnostics */ if ( !retval ) retval = adapter_test(info);

@@ -2680,7 +2680,7 @@ static void rx_free_buffers(MGSLPC_INFO *info) static int claim_resources(MGSLPC_INFO *info) { if (rx_alloc_buffers(info) < 0 ) { - printk( "Cant allocate rx buffer %s\n", info->device_name); + printk( "Can't allocate rx buffer %s\n", info->device_name); release_resources(info); return -ENODEV; } diff --git a/drivers/char/random.c b/drivers/char/random.c index 5e29e80..d4ddeba 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -732,7 +732,7 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, size_t nbytes, int min, int rsvd);

/* - * This utility inline function is responsible for transfering entropy + * This utility inline function is responsible for transferring entropy * from the primary pool to the secondary extraction pool. We make * sure we pull enough for a 'catastrophic reseed'. */ diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 79e36c8..1ee8ce7 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -1241,7 +1241,7 @@ static int __devinit sonypi_setup_ioports(struct sonypi_device *dev, while (check_ioport && check->port1) { if (!request_region(check->port1, sonypi_device.region_size, - "Sony Programable I/O Device Check")) { + "Sony Programmable I/O Device Check")) { printk(KERN_ERR "sonypi: ioport 0x%.4x busy, using sony-laptop? " "if not use check_ioport=0\n", check->port1); @@ -1255,7 +1255,7 @@ static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,

if (request_region(ioport_list->port1, sonypi_device.region_size, - "Sony Programable I/O Device")) { + "Sony Programmable I/O Device")) { dev->ioport1 = ioport_list->port1; dev->ioport2 = ioport_list->port2; return 0; diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index d3c9d75..d6412c1 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -67,7 +67,7 @@ * cp foo.bit /dev/icap0 * * Note that unless foo.bit is an appropriately constructed partial - * bitstream, this has a high likelyhood of overwriting the design + * bitstream, this has a high likelihood of overwriting the design * currently programmed in the FPGA. */

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b03771d..2dafc5c 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1782,7 +1782,7 @@ error_out: * cpufreq_update_policy - re-evaluate an existing cpufreq policy * @cpu: CPU which shall be re-evaluated * - * Usefull for policy notifiers which have different necessities + * Useful for policy notifiers which have different necessities * at different times. */ int cpufreq_update_policy(unsigned int cpu) diff --git a/drivers/crypto/amcc/crypto4xx_sa.c b/drivers/crypto/amcc/crypto4xx_sa.c index 466fd94..de8a7a4 100644 --- a/drivers/crypto/amcc/crypto4xx_sa.c +++ b/drivers/crypto/amcc/crypto4xx_sa.c @@ -17,7 +17,7 @@ * @file crypto4xx_sa.c * * This file implements the security context - * assoicate format. + * associate format. */ #include <linux/kernel.h> #include <linux/module.h> diff --git a/drivers/crypto/amcc/crypto4xx_sa.h b/drivers/crypto/amcc/crypto4xx_sa.h index 4b83ed7..1352d58 100644 --- a/drivers/crypto/amcc/crypto4xx_sa.h +++ b/drivers/crypto/amcc/crypto4xx_sa.h @@ -15,7 +15,7 @@ * GNU General Public License for more details. * * This file defines the security context - * assoicate format. + * associate format. */

#ifndef __CRYPTO4XX_SA_H__ diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 0d66221..4c20c5b 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -1044,7 +1044,7 @@ static int aead_perform(struct aead_request *req, int encrypt, memcpy(crypt->iv, req->iv, ivsize);

if (req->src != req->dst) { - BUG(); /* -ENOTSUP because of my lazyness */ + BUG(); /* -ENOTSUP because of my laziness */ }

/* ASSOC data */ diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 3d7d705..235f53b 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -167,7 +167,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) /** * atc_assign_cookie - compute and assign new cookie * @atchan: channel we work on - * @desc: descriptor to asign cookie for + * @desc: descriptor to assign cookie for * * Called with atchan->lock held and bh disabled */ diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 00deabd..f48e540 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -529,7 +529,7 @@ static void coh901318_pause(struct dma_chan *chan) val = readl(virtbase + COH901318_CX_CFG + COH901318_CX_CFG_SPACING * channel);

- /* Stopping infinit transfer */ + /* Stopping infinite transfer */ if ((val & COH901318_CX_CTRL_TC_ENABLE) == 0 && (val & COH901318_CX_CFG_CH_ENABLE)) cohc->stopped = 1; diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 798f46a..3d4ec38 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -911,8 +911,8 @@ static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan)

/** * midc_handle_error - Handle DMA txn error - * @mid: controller where error occured - * @midc: chan where error occured + * @mid: controller where error occurred + * @midc: chan where error occurred * * Scan the descriptor for error */ @@ -1099,7 +1099,7 @@ static int mid_setup_dma(struct pci_dev *pdev) dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE, LNW_PERIPHRAL_MASK_SIZE); if (dma->mask_reg == NULL) { - pr_err("ERR_MDMA:Cant map periphral intr space !!\n"); + pr_err("ERR_MDMA:Can't map periphral intr space !!\n"); return -ENOMEM; } } else @@ -1373,7 +1373,7 @@ int dma_resume(struct pci_dev *pci) pci_restore_state(pci); ret = pci_enable_device(pci); if (ret) { - pr_err("MDMA: device cant be enabled for %x\n", pci->device); + pr_err("MDMA: device can't be enabled for %x\n", pci->device); return ret; } device->state = RUNNING; diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h index 709fecb..aea5ee8 100644 --- a/drivers/dma/intel_mid_dma_regs.h +++ b/drivers/dma/intel_mid_dma_regs.h @@ -174,8 +174,8 @@ union intel_mid_dma_cfg_hi { * @dma: dma device struture pointer * @busy: bool representing if ch is busy (active txn) or not * @in_use: bool representing if ch is in use or not - * @raw_tfr: raw trf interrupt recieved - * @raw_block: raw block interrupt recieved + * @raw_tfr: raw trf interrupt received + * @raw_block: raw block interrupt received */ struct intel_mid_dma_chan { struct dma_chan chan; diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 4f95d31..b9bae94 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -328,7 +328,7 @@ static irqreturn_t mpc_dma_irq(int irq, void *data) return IRQ_HANDLED; }

-/* proccess completed descriptors */ +/* process completed descriptors */ static void mpc_dma_process_completed(struct mpc_dma *mdma) { dma_cookie_t last_cookie = 0; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index af955de..94ee15d 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -90,7 +90,7 @@ struct d40_lli_pool { * @lli_log: Same as above but for logical channels. * @lli_pool: The pool with two entries pre-allocated. * @lli_len: Number of llis of current descriptor. - * @lli_current: Number of transfered llis. + * @lli_current: Number of transferred llis. * @lcla_alloc: Number of LCLA entries allocated. * @txd: DMA engine struct. Used for among other things for communication * during a transfer. @@ -1214,7 +1214,7 @@ static void dma_tasklet(unsigned long data) return;

err: - /* Rescue manouver if receiving double interrupts */ + /* Rescue manoeuvre if receiving double interrupts */ if (d40c->pending_tx > 0) d40c->pending_tx--; spin_unlock_irqrestore(&d40c->lock, flags); diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index fac1a20..af1a17d 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -45,7 +45,7 @@ config EDAC_DECODE_MCE default y ---help--- Enable this option if you want to decode Machine Check Exceptions - occuring on your machine in human-readable form. + occurring on your machine in human-readable form.

You should definitely say Y here in case you want to decode MCEs which occur really early upon boot, before the module infrastructure diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c index b9a781c..837ad8f 100644 --- a/drivers/edac/cpc925_edac.c +++ b/drivers/edac/cpc925_edac.c @@ -817,7 +817,7 @@ static void cpc925_del_edac_devices(void) } }

-/* Convert current back-ground scrub rate into byte/sec bandwith */ +/* Convert current back-ground scrub rate into byte/sec bandwidth */ static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci) { struct cpc925_mc_pdata *pdata = mci->pvt_info; diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 3d96534..eefa350 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -164,7 +164,7 @@ enum mem_type { /* chipset Error Detection and Correction capabilities and mode */ enum edac_type { EDAC_UNKNOWN = 0, /* Unknown if ECC is available */ - EDAC_NONE, /* Doesnt support ECC */ + EDAC_NONE, /* Doesn't support ECC */ EDAC_RESERVED, /* Reserved ECC type */ EDAC_PARITY, /* Detects parity errors */ EDAC_EC, /* Error Checking - no correction */ @@ -233,7 +233,7 @@ enum scrub_type { * of these in parallel provides 64 bits which is common * for a memory stick. * - * Memory Stick: A printed circuit board that agregates multiple + * Memory Stick: A printed circuit board that aggregates multiple * memory devices in parallel. This is the atomic * memory component that is purchaseable by Joe consumer * and loaded into a memory socket. @@ -385,7 +385,7 @@ struct mem_ctl_info {

/* Get the current sdram memory scrub rate from the internal representation and converts it to the closest matching - bandwith in bytes/sec. + bandwidth in bytes/sec. */ int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);

@@ -823,7 +823,7 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, * There are a limited number of error logging registers that can * be exausted. When all registers are exhausted and an additional * error occurs then an error overflow register records that an - * error occured and the type of error, but doesn't have any + * error occurred and the type of error, but doesn't have any * further information. The ce/ue versions make for cleaner * reporting logic and function interface - reduces conditional * statement clutter and extra function arguments. diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index d5e13c9..a7408cf 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -672,7 +672,7 @@ void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev, block->counters.ce_count++; }

- /* Propogate the count up the 'totals' tree */ + /* Propagate the count up the 'totals' tree */ instance->counters.ce_count++; edac_dev->counters.ce_count++;

@@ -718,7 +718,7 @@ void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev, block->counters.ue_count++; }

- /* Propogate the count up the 'totals' tree */ + /* Propagate the count up the 'totals' tree */ instance->counters.ue_count++; edac_dev->counters.ue_count++;

diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 400de07..86649df 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -533,7 +533,7 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev, memset(&block->kobj, 0, sizeof(struct kobject));

/* bump the main kobject's reference count for this controller - * and this instance is dependant on the main + * and this instance is dependent on the main */ main_kobj = kobject_get(&edac_dev->kobj); if (!main_kobj) { @@ -635,7 +635,7 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev, instance->ctl = edac_dev;

/* bump the main kobject's reference count for this controller - * and this instance is dependant on the main + * and this instance is dependent on the main */ main_kobj = kobject_get(&edac_dev->kobj); if (!main_kobj) { diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index a4e9db2..1d80560 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -724,7 +724,7 @@ void edac_mc_handle_ce(struct mem_ctl_info *mci, * Some MC's can remap memory so that it is still available * at a different address when PCI devices map into memory. * MC's that can't do this lose the memory where PCI devices - * are mapped. This mapping is MC dependant and so we call + * are mapped. This mapping is MC dependent and so we call * back into the MC driver for it to map the MC page to * a physical (CPU) page which can then be mapped to a virtual * page - which can then be scrubbed. diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 73196f7..26343fd 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -850,7 +850,7 @@ static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,

/* * loop if there are attributes and until we hit a NULL entry - * Remove first all the atributes + * Remove first all the attributes */ while (sysfs_attrib) { debugf4("%s() sysfs_attrib = %p\n",__func__, sysfs_attrib); diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index 023b01c..495198a 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -352,7 +352,7 @@ static int edac_pci_main_kobj_setup(void) return 0;

/* First time, so create the main kobject and its - * controls and atributes + * controls and attributes */ edac_class = edac_get_sysfs_class(); if (edac_class == NULL) { @@ -551,7 +551,7 @@ static void edac_pci_dev_parity_clear(struct pci_dev *dev) /* * PCI Parity polling * - * Fucntion to retrieve the current parity status + * Function to retrieve the current parity status * and decode it * */ diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index a5cefab..87f427c 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1372,7 +1372,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx) * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this - * allows the driver to support upto the chipset max, without + * allows the driver to support up to the chipset max, without * some fancy mobo determination. */ i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel, diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c index 0448da0..bcbdeec 100644 --- a/drivers/edac/i5100_edac.c +++ b/drivers/edac/i5100_edac.c @@ -11,7 +11,7 @@ * * The intel 5100 has two independent channels. EDAC core currently * can not reflect this configuration so instead the chip-select - * rows for each respective channel are layed out one after another, + * rows for each respective channel are laid out one after another, * the first half belonging to channel 0, the second half belonging * to channel 1. */ diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c index 38a9be9..80a465e 100644 --- a/drivers/edac/i5400_edac.c +++ b/drivers/edac/i5400_edac.c @@ -648,7 +648,7 @@ static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci, return; }

- /* Miscelaneous errors */ + /* Miscellaneous errors */ errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));

branch = extract_fbdchan_indx(info->ferr_nf_fbd); @@ -1240,7 +1240,7 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx) * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this - * allows the driver to support upto the chipset max, without + * allows the driver to support up to the chipset max, without * some fancy mobo determination. */ num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL; diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c index 76d1f57..363cc16 100644 --- a/drivers/edac/i7300_edac.c +++ b/drivers/edac/i7300_edac.c @@ -1065,7 +1065,7 @@ static int __devinit i7300_init_one(struct pci_dev *pdev, * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this - * allows the driver to support upto the chipset max, without + * allows the driver to support up to the chipset max, without * some fancy mobo determination. */ num_dimms_per_channel = MAX_SLOTS; diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 81154ab..465cbc2 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -1772,7 +1772,7 @@ static void i7core_check_error(struct mem_ctl_info *mci) /* * MCE first step: Copy all mce errors into a temporary buffer * We use a double buffering here, to reduce the risk of - * loosing an error. + * losing an error. */ smp_rmb(); count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in) diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c index 678405a..4329d39 100644 --- a/drivers/edac/i82443bxgx_edac.c +++ b/drivers/edac/i82443bxgx_edac.c @@ -203,7 +203,7 @@ static void i82443bxgx_init_csrows(struct mem_ctl_info *mci, row_high_limit = ((u32) drbar << 23); /* find the DRAM Chip Select Base address and mask */ debugf1("MC%d: %s: %s() Row=%d, " - "Boundry Address=%#0x, Last = %#0x\n", + "Boundary Address=%#0x, Last = %#0x\n", mci->mc_idx, __FILE__, __func__, index, row_high_limit, row_high_limit_last);

@@ -305,7 +305,7 @@ static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx) i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);

/* Many BIOSes don't clear error flags on boot, so do this - * here, or we get "phantom" errors occuring at module-load + * here, or we get "phantom" errors occurring at module-load * time. */ pci_write_bits32(pdev, I82443BXGX_EAP, (I82443BXGX_EAP_OFFSET_SBE | diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c index 733a7e7..a4987e0 100644 --- a/drivers/edac/mce_amd_inj.c +++ b/drivers/edac/mce_amd_inj.c @@ -90,7 +90,7 @@ static ssize_t edac_inject_bank_store(struct kobject *kobj,

if (value > 5) if (boot_cpu_data.x86 != 0x15 || value > 6) { - printk(KERN_ERR "Non-existant MCE bank: %lu\n", value); + printk(KERN_ERR "Non-existent MCE bank: %lu\n", value); return -EINVAL; }

diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c index 6a822c6..6785137 100644 --- a/drivers/edac/r82600_edac.c +++ b/drivers/edac/r82600_edac.c @@ -120,7 +120,7 @@ * write 0=NOP */

-#define R82600_DRBA 0x60 /* + 0x60..0x63 SDRAM Row Boundry Address +#define R82600_DRBA 0x60 /* + 0x60..0x63 SDRAM Row Boundary Address * Registers * * 7:0 Address lines 30:24 - upper limit of @@ -217,7 +217,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, { struct csrow_info *csrow; int index; - u8 drbar; /* SDRAM Row Boundry Address Register */ + u8 drbar; /* SDRAM Row Boundary Address Register */ u32 row_high_limit, row_high_limit_last; u32 reg_sdram, ecc_on, row_base;

@@ -236,7 +236,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, row_high_limit = ((u32) drbar << 24); /* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */

- debugf1("%s() Row=%d, Boundry Address=%#0x, Last = %#0x\n", + debugf1("%s() Row=%d, Boundary Address=%#0x, Last = %#0x\n", __func__, index, row_high_limit, row_high_limit_last);

/* Empty row [p.57] */ diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index 7ed08fd..3f04dd3 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -453,7 +453,7 @@ static bool fwnet_pd_update(struct fwnet_peer *peer, memcpy(pd->pbuf + frag_off, frag_buf, frag_len);

/* - * Move list entry to beginnig of list so that oldest partial + * Move list entry to beginning of list so that oldest partial * datagrams percolate to the end of the list */ list_move_tail(&pd->pd_link, &peer->pd_list); diff --git a/drivers/gpio/mc33880.c b/drivers/gpio/mc33880.c index 00f6d24..4ec7975 100644 --- a/drivers/gpio/mc33880.c +++ b/drivers/gpio/mc33880.c @@ -45,7 +45,7 @@ * To save time we cache them here in memory */ struct mc33880 { - struct mutex lock; /* protect from simultanous accesses */ + struct mutex lock; /* protect from simultaneous accesses */ u8 port_config; struct gpio_chip chip; struct spi_device *spi; diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 799e149..872747c 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1699,7 +1699,7 @@ int drm_mode_addfb(struct drm_device *dev,

mutex_lock(&dev->mode_config.mutex);

- /* TODO check buffer is sufficently large */ + /* TODO check buffer is sufficiently large */ /* TODO setup destructor callback */

fb = dev->mode_config.funcs->fb_create(dev, file_priv, r); @@ -1750,7 +1750,7 @@ int drm_mode_rmfb(struct drm_device *dev,

mutex_lock(&dev->mode_config.mutex); obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB); - /* TODO check that we realy get a framebuffer back. */ + /* TODO check that we really get a framebuffer back. */ if (!obj) { DRM_ERROR("mode invalid framebuffer id\n"); ret = -EINVAL; diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index add1737..5d00b0f 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -551,7 +551,7 @@ EXPORT_SYMBOL(drm_mm_scan_add_block); * corrupted. * * When the scan list is empty, the selected memory nodes can be freed. An - * immediatly following drm_mm_search_free with best_match = 0 will then return + * immediately following drm_mm_search_free with best_match = 0 will then return * the just freed block (because its at the top of the free_stack list). * * Returns one if this block should be evicted, zero otherwise. Will always diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 5004724..1c1b27c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -630,7 +630,7 @@ typedef struct drm_i915_private { * Flag if the hardware appears to be wedged. * * This is set when attempts to idle the device timeout. - * It prevents command submission from occuring and makes + * It prevents command submission from occurring and makes * every pending request fail */ atomic_t wedged; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0daefca..cb8578b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -213,7 +213,7 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; }

- /* only refuse the mode on non eDP since we have seen some wierd eDP panels + /* only refuse the mode on non eDP since we have seen some weird eDP panels which are outside spec tolerances but somehow work by magic */ if (!is_edp(intel_dp) && (intel_dp_link_required(connector->dev, intel_dp, mode->clock) diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index a386b02..4f4e23b 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -230,7 +230,7 @@ struct intel_sdvo_set_target_input_args { } __attribute__((packed));

/** - * Takes a struct intel_sdvo_output_flags of which outputs are targetted by + * Takes a struct intel_sdvo_output_flags of which outputs are targeted by * future output commands. * * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12], diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c index 1e1eb1d..5ccb65d 100644 --- a/drivers/gpu/drm/mga/mga_dma.c +++ b/drivers/gpu/drm/mga/mga_dma.c @@ -426,7 +426,7 @@ int mga_driver_load(struct drm_device *dev, unsigned long flags) * Bootstrap the driver for AGP DMA. * * \todo - * Investigate whether there is any benifit to storing the WARP microcode in + * Investigate whether there is any benefit to storing the WARP microcode in * AGP memory. If not, the microcode may as well always be put in PCI * memory. * diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 3837090..4cea35c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -200,7 +200,7 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, /* disable the fifo caches */ pfifo->reassign(dev, false);

- /* Construct inital RAMFC for new channel */ + /* Construct initial RAMFC for new channel */ ret = pfifo->create_context(chan); if (ret) { nouveau_channel_put(&chan); @@ -278,7 +278,7 @@ nouveau_channel_put_unlocked(struct nouveau_channel **pchan) return; }

- /* noone wants the channel anymore */ + /* no one wants the channel anymore */ NV_DEBUG(dev, "freeing channel %d\n", chan->id); nouveau_debugfs_channel_fini(chan);

diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index fff180a..57e5302 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -216,7 +216,7 @@ struct nouveau_channel { /* mapping of the fifo itself */ struct drm_local_map *map;

- /* mapping of the regs controling the fifo */ + /* mapping of the regs controlling the fifo */ void __iomem *user; uint32_t user_get; uint32_t user_put; diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 4fcbd09..5bb2859 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -963,7 +963,7 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) if (ret) goto err_mmio;

- /* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */ + /* Map PRAMIN BAR, or on older cards, the aperture within BAR0 */ if (dev_priv->card_type >= NV_40) { int ramin_bar = 2; if (pci_resource_len(dev->pdev, ramin_bar) == 0) diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c index a260fbb..748b9d9 100644 --- a/drivers/gpu/drm/nouveau/nv04_crtc.c +++ b/drivers/gpu/drm/nouveau/nv04_crtc.c @@ -164,7 +164,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode) NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode, nv_crtc->index);

- if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */ + if (nv_crtc->last_dpms == mode) /* Don't do unnecessary mode changes. */ return;

nv_crtc->last_dpms = mode; @@ -677,7 +677,7 @@ static void nv_crtc_prepare(struct drm_crtc *crtc)

NVBlankScreen(dev, nv_crtc->index, true);

- /* Some more preperation. */ + /* Some more preparation. */ NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA); if (dev_priv->card_type == NV_40) { uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900); diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 18d30c2..fceb44c 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -181,7 +181,7 @@ nv40_graph_load_context(struct nouveau_channel *chan) NV40_PGRAPH_CTXCTL_CUR_LOADED); /* 0x32E0 records the instance address of the active FIFO's PGRAPH * context. If at any time this doesn't match 0x40032C, you will - * recieve PGRAPH_INTR_CONTEXT_SWITCH + * receive PGRAPH_INTR_CONTEXT_SWITCH */ nv_wr32(dev, NV40_PFIFO_GRCTX_INSTANCE, inst); return 0; diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 04b269d..7fd8849 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -738,13 +738,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V3 { #if ATOM_BIG_ENDIAN UCHAR ucReserved1:1; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved:3; UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz #else UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz UCHAR ucReserved:3; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved1:1; #endif }ATOM_DIG_ENCODER_CONFIG_V3; @@ -785,13 +785,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 { #if ATOM_BIG_ENDIAN UCHAR ucReserved1:1; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved:2; UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version #else UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version UCHAR ucReserved:2; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved1:1; #endif }ATOM_DIG_ENCODER_CONFIG_V4; @@ -2126,7 +2126,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO // Structures used in FirmwareInfoTable /****************************************************************************/

-// usBIOSCapability Defintion: +// usBIOSCapability Definition: // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; @@ -3341,7 +3341,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_INFO /****************************************************************************/ // Structure used in AnalogTV_InfoTable (Top level) /****************************************************************************/ -//ucTVBootUpDefaultStd definiton: +//ucTVBootUpDefaultStd definition:

//ATOM_TV_NTSC 1 //ATOM_TV_NTSCJ 2 @@ -3816,7 +3816,7 @@ typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO UCHAR Reserved [6]; // for potential expansion }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;

-//Related definitions, all records are differnt but they have a commond header +//Related definitions, all records are different but they have a commond header typedef struct _ATOM_COMMON_RECORD_HEADER { UCHAR ucRecordType; //An emun to indicate the record type @@ -4365,14 +4365,14 @@ ucUMAChannelNumber: System memory channel numbers. ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. -sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +sAvail_SCLK[5]: Arrays to provide available list of SLCK and corresponding voltage, order from low to high ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. -usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%. -usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. @@ -4555,7 +4555,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4

-//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S0_CRT1_MONOb0 0x01 #define ATOM_S0_CRT1_COLORb0 0x02 #define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0) @@ -4621,7 +4621,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L

-//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S2_TV1_STANDARD_MASKb0 0x0F #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF #define ATOM_S2_DEVICE_DPMS_STATEb2 0x01 @@ -4671,7 +4671,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L #define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L

-//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S3_CRT1_ACTIVEb0 0x01 #define ATOM_S3_LCD1_ACTIVEb0 0x02 #define ATOM_S3_TV1_ACTIVEb0 0x04 @@ -4707,7 +4707,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L #define ATOM_S4_LCD1_REFRESH_SHIFT 8

-//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF #define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 #define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 @@ -4786,7 +4786,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L

-//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S6_DEVICE_CHANGEb0 0x01 #define ATOM_S6_SCALER_CHANGEb0 0x02 #define ATOM_S6_LID_CHANGEb0 0x04 @@ -5027,7 +5027,7 @@ typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION

typedef struct _MEMORY_CLEAN_UP_PARAMETERS { - USHORT usMemoryStart; //in 8Kb boundry, offset from memory base address + USHORT usMemoryStart; //in 8Kb boundary, offset from memory base address USHORT usMemorySize; //8Kb blocks aligned }MEMORY_CLEAN_UP_PARAMETERS; #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS @@ -6855,7 +6855,7 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table /**************************************************************************/

-// Following definitions are for compatiblity issue in different SW components. +// Following definitions are for compatibility issue in different SW components. #define ATOM_MASTER_DATA_TABLE_REVISION 0x01 #define Object_Info Object_Header #define AdjustARB_SEQ MC_InitParameter diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index edde90b..23d3641 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -442,7 +442,7 @@ static inline int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u3 } ib = p->ib->ptr; switch (reg) { - /* force following reg to 0 in an attemp to disable out buffer + /* force following reg to 0 in an attempt to disable out buffer * which will need us to better understand how it works to perform * security check on it (Jerome) */ diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 8713731..55a7f19 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -437,7 +437,7 @@ int r300_asic_reset(struct radeon_device *rdev) status = RREG32(R_000E40_RBBM_STATUS); dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status); /* resetting the CP seems to be problematic sometimes it end up - * hard locking the computer, but it's necessary for successfull + * hard locking the computer, but it's necessary for successful * reset more test & playing is needed on R3XX/R4XX to find a * reliable (if any solution) */ diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index f0bce39..00c0d2b 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -608,7 +608,7 @@ * My guess is that there are two bits for each zbias primitive * (FILL, LINE, POINT). * One to enable depth test and one for depth write. - * Yet this doesnt explain why depth writes work ... + * Yet this doesn't explain why depth writes work ... */ #define R300_RE_OCCLUSION_CNTL 0x42B4 # define R300_OCCLUSION_ON (1<<1) @@ -817,7 +817,7 @@ # define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) # define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11)

-/* NOTE: NEAREST doesnt seem to exist. +/* NOTE: NEAREST doesn't seem to exist. * Im not seting MAG_FILTER_MASK and (3 << 11) on for all * anisotropy modes because that would void selected mag filter */ diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 3324620..fd18be9 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -921,7 +921,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx return 0; ib = p->ib->ptr; switch (reg) { - /* force following reg to 0 in an attemp to disable out buffer + /* force following reg to 0 in an attempt to disable out buffer * which will need us to better understand how it works to perform * security check on it (Jerome) */ diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 50db6d6..f5ac7e7 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -334,7 +334,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod r600_hdmi_videoinfoframe(encoder, RGB, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);

- /* it's unknown what these bits do excatly, but it's indeed quite usefull for debugging */ + /* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */ WREG32(offset+R600_HDMI_AUDIO_DEBUG_0, 0x00FFFFFF); WREG32(offset+R600_HDMI_AUDIO_DEBUG_1, 0x007FFFFF); WREG32(offset+R600_HDMI_AUDIO_DEBUG_2, 0x00000001); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index cfe3af1..93f5365 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -679,11 +679,11 @@ struct radeon_wb { * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP) * @ht_bandwidth: ht bandwidth the gpu has (MByte/s) (IGP) * @core_bandwidth: core GPU bandwidth the gpu has (MByte/s) (IGP) - * @sclk: GPU clock Mhz (core bandwith depends of this clock) + * @sclk: GPU clock Mhz (core bandwidth depends of this clock) * @needed_bandwidth: current bandwidth needs * * It keeps track of various data needed to take powermanagement decision. - * Bandwith need is used to determine minimun clock of the GPU and memory. + * Bandwidth need is used to determine minimun clock of the GPU and memory. * Equation between gpu/memory clock and available bandwidth is hw dependent * (type of memory, bus size, efficiency, ...) */ diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 3d599e3..7586779 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -244,7 +244,7 @@ void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) u32 agp_base_lo = agp_base & 0xffffffff; u32 r6xx_agp_base = (agp_base >> 22) & 0x3ffff;

- /* R6xx/R7xx must be aligned to a 4MB boundry */ + /* R6xx/R7xx must be aligned to a 4MB boundary */ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV770) RADEON_WRITE(R700_MC_VM_AGP_BASE, r6xx_agp_base); else if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600) diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index 017ac54..bdf2fa1 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -226,7 +226,7 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc, y += crtc->y; DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);

- /* avivo cursor image can't end on 128 pixel boundry or + /* avivo cursor image can't end on 128 pixel boundary or * go past the end of the frame if both crtcs are enabled */ list_for_each_entry(crtc_p, &crtc->dev->mode_config.crtc_list, head) { diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f0209be..890217e 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -262,7 +262,7 @@ int radeon_wb_init(struct radeon_device *rdev) * Note: GTT start, end, size should be initialized before calling this * function on AGP platform. * - * Note: We don't explictly enforce VRAM start to be aligned on VRAM size, + * Note: We don't explicitly enforce VRAM start to be aligned on VRAM size, * this shouldn't be a problem as we are using the PCI aperture as a reference. * Otherwise this would be needed for rv280, all r3xx, and all r4xx, but * not IGP. diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 4be5879..bdbab5c 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -1492,7 +1492,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, * * \return Flags, or'ed together as follows: * - * DRM_SCANOUTPOS_VALID = Query successfull. + * DRM_SCANOUTPOS_VALID = Query successful. * DRM_SCANOUTPOS_INVBL = Inside vblank. * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of * this flag means that returned position may be offset by a constant but diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 5cba46b..a1b59ca 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -271,7 +271,7 @@ typedef struct drm_radeon_private {

int have_z_offset;

- /* starting from here on, data is preserved accross an open */ + /* starting from here on, data is preserved across an open */ uint32_t flags; /* see radeon_chip_flags */ resource_size_t fb_aper_offset;

diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h index 7f8e778..ede6c13 100644 --- a/drivers/gpu/drm/radeon/radeon_object.h +++ b/drivers/gpu/drm/radeon/radeon_object.h @@ -87,7 +87,7 @@ static inline void radeon_bo_unreserve(struct radeon_bo *bo) * Returns current GPU offset of the object. * * Note: object should either be pinned or reserved when calling this - * function, it might be usefull to add check for this for debugging. + * function, it might be useful to add check for this for debugging. */ static inline u64 radeon_bo_gpu_offset(struct radeon_bo *bo) { diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 4ae5a3d..92e7ea7 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -980,7 +980,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev, }

/* hyper z clear */ - /* no docs available, based on reverse engeneering by Stephane Marchesin */ + /* no docs available, based on reverse engineering by Stephane Marchesin */ if ((flags & (RADEON_DEPTH | RADEON_STENCIL)) && (flags & RADEON_CLEAR_FASTZ)) {

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index cceeb42..dfe32e6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -245,7 +245,7 @@ void vmw_kms_cursor_snoop(struct vmw_surface *srf, /* TODO handle none page aligned offsets */ /* TODO handle partial uploads and pitch != 256 */ /* TODO handle more then one copy (size != 64) */ - DRM_ERROR("lazy programer, cant handle wierd stuff\n"); + DRM_ERROR("lazy programmer, can't handle weird stuff\n"); return; }

diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index ace2b16..be8d4cb 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -151,7 +151,7 @@ static inline void vga_irq_set_state(struct vga_device *vgadev, bool state) static void vga_check_first_use(void) { /* we should inform all GPUs in the system that - * VGA arb has occured and to try and disable resources + * VGA arb has occurred and to try and disable resources * if they can */ if (!vga_arbiter_used) { vga_arbiter_used = true; @@ -774,7 +774,7 @@ static ssize_t vga_arb_read(struct file *file, char __user * buf, */ spin_lock_irqsave(&vga_lock, flags);

- /* If we are targetting the default, use it */ + /* If we are targeting the default, use it */ pdev = priv->target; if (pdev == NULL || pdev == PCI_INVALID_CARD) { spin_unlock_irqrestore(&vga_lock, flags); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index e968776..453e7e6 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -306,7 +306,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item) case HID_GLOBAL_ITEM_TAG_PUSH:

if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) { - dbg_hid("global enviroment stack overflow\n"); + dbg_hid("global environment stack overflow\n"); return -1; }

@@ -317,7 +317,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item) case HID_GLOBAL_ITEM_TAG_POP:

if (!parser->global_stack_ptr) { - dbg_hid("global enviroment stack underflow\n"); + dbg_hid("global environment stack underflow\n"); return -1; }

diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 555382f..bae4874 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -341,7 +341,7 @@ static const struct hid_usage_entry hid_usage_table[] = { { 0x85, 0x83, "DesignCapacity" }, { 0x85, 0x85, "ManufacturerDate" }, { 0x85, 0x89, "iDeviceChemistry" }, - { 0x85, 0x8b, "Rechargable" }, + { 0x85, 0x8b, "Rechargeable" }, { 0x85, 0x8f, "iOEMInformation" }, { 0x85, 0x8d, "CapacityGranularity1" }, { 0x85, 0xd0, "ACPresent" }, diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 318cc40..7a61373 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -76,7 +76,7 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie * This is true when single_touch_id is equal to NO_TOUCHES. If multiple touches * are down and the touch providing for single touch emulation is lifted, * single_touch_id is equal to SINGLE_TOUCH_UP. While single touch emulation is - * occuring, single_touch_id corresponds with the tracking id of the touch used. + * occurring, single_touch_id corresponds with the tracking id of the touch used. */ #define NO_TOUCHES -1 #define SINGLE_TOUCH_UP -2 diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 657da5a..b2f56a1 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -1806,13 +1806,13 @@ static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, /* * Notes: * - concurrent writing is prevented by mutex and all writes must be - * n*64 bytes and 64-byte aligned, each write being preceeded by an + * n*64 bytes and 64-byte aligned, each write being preceded by an * ERASE which erases a 64byte block. * If less than requested was written or an error is returned for an * otherwise correct write request the next 64-byte block which should * have been written is in undefined state (mostly: original, erased, * (half-)written with write error) - * - reading can happend without special restriction + * - reading can happen without special restriction */ static const struct file_operations picolcd_debug_flash_fops = { .owner = THIS_MODULE, diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h index 64abb5b..4109a02 100644 --- a/drivers/hid/hid-roccat-kone.h +++ b/drivers/hid/hid-roccat-kone.h @@ -166,7 +166,7 @@ enum kone_mouse_events { /* osd events are thought to be display on screen */ kone_mouse_event_osd_dpi = 0xa0, kone_mouse_event_osd_profile = 0xb0, - /* TODO clarify meaning and occurence of kone_mouse_event_calibration */ + /* TODO clarify meaning and occurrence of kone_mouse_event_calibration */ kone_mouse_event_calibration = 0xc0, kone_mouse_event_call_overlong_macro = 0xe0, /* switch events notify if user changed values with mousebutton click */ diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 0e05aa1..e7d4c46 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -1422,7 +1422,7 @@ static int __init abituguru_detect(void) at DATA and 0xAC, when this driver has already been loaded once DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either scenario but some will hold 0x00. - Some uGuru's initally hold 0x09 at DATA and will only hold 0x08 + Some uGuru's initially hold 0x09 at DATA and will only hold 0x08 after reading CMD first, so CMD must be read first! */ u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD); u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA); diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index 034cebf..e89d572 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -151,7 +151,7 @@ struct abituguru3_data { /* Pointer to the sensors info for the detected motherboard */ const struct abituguru3_sensor_info *sensors;

- /* The abituguru3 supports upto 48 sensors, and thus has registers + /* The abituguru3 supports up to 48 sensors, and thus has registers sets for 48 sensors, for convienence reasons / simplicity of the code we always read and store all registers for all 48 sensors */

diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index be0fdd5..0531867 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -175,7 +175,7 @@ static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f }; * these macros are called: arguments may be evaluated more than once. */

-/* IN are scaled acording to built-in resistors. These are the +/* IN are scaled according to built-in resistors. These are the * voltages corresponding to 3/4 of full scale (192 or 0xc0) * NOTE: The -12V input needs an additional factor to account * for the Vref pullup resistor. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index cf47e6e..250d099 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -130,7 +130,7 @@ enum chips { these macros are called: arguments may be evaluated more than once. */

-/* IN are scaled acording to built-in resistors */ +/* IN are scaled according to built-in resistors */ static const int lm85_scaling[] = { /* .001 Volts */ 2500, 2250, 3300, 5000, 12000, 3300, 1500, 1800 /*EMC6D100*/ diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 812781c..c43b4e9 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -356,7 +356,7 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value) /* * There is a trick here. We have to read two registers to have the * sensor temperature, but we have to beware a conversion could occur - * inbetween the readings. The datasheet says we should either use + * between the readings. The datasheet says we should either use * the one-shot conversion register, which we don't want to do * (disables hardware monitoring) or monitor the busy bit, which is * impossible (we can't read the values and monitor that bit at the diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 1a9c32d..f4e617a 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -52,7 +52,7 @@ #define SHT15_TSU 150 /* data setup time */

/** - * struct sht15_temppair - elements of voltage dependant temp calc + * struct sht15_temppair - elements of voltage dependent temp calc * @vdd: supply voltage in microvolts * @d1: see data sheet */ @@ -251,7 +251,7 @@ static inline int sht15_update_single_val(struct sht15_data *data, enable_irq(gpio_to_irq(data->pdata->gpio_data)); if (gpio_get_value(data->pdata->gpio_data) == 0) { disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data)); - /* Only relevant if the interrupt hasn't occured. */ + /* Only relevant if the interrupt hasn't occurred. */ if (!atomic_read(&data->interrupt_handled)) schedule_work(&data->read_work); } @@ -452,7 +452,7 @@ static void sht15_bh_read_data(struct work_struct *work_s) */ atomic_set(&data->interrupt_handled, 0); enable_irq(gpio_to_irq(data->pdata->gpio_data)); - /* If still not occured or another handler has been scheduled */ + /* If still not occurred or another handler has been scheduled */ if (gpio_get_value(data->pdata->gpio_data) || atomic_read(&data->interrupt_handled)) return; diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 93187c3c..5bd1949 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -166,7 +166,7 @@ static int __devinit tmp102_probe(struct i2c_client *client,

if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) { - dev_err(&client->dev, "adapter doesnt support SMBus word " + dev_err(&client->dev, "adapter doesn't support SMBus word " "transactions\n"); return -ENODEV; } diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 400a88b..17cf1ab 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -556,7 +556,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,

/* Note: we save and restore the fan minimum here, because its value is determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just + least surprise; the user doesn't expect the fan minimum to change just because the divisor changed. */ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 63841f8..f3e7130 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -244,7 +244,7 @@ FAN_TO_REG(long rpm, int div) #define TEMP1_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ : (val)) / 1000, 0, 0xff)) #define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) -/* for temp2 and temp3, because they need addtional resolution */ +/* for temp2 and temp3, because they need additional resolution */ #define TEMP_ADD_FROM_REG(val1, val2) \ ((((val1) & 0x80 ? (val1)-0x100 \ : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0)) diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index e3bdedf..854f911 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -1921,7 +1921,7 @@ static void w83793_update_nonvolatile(struct device *dev) struct w83793_data *data = i2c_get_clientdata(client); int i, j; /* - They are somewhat "stable" registers, and to update them everytime + They are somewhat "stable" registers, and to update them every time takes so much time, it's just not worthy. Update them in a long interval to avoid exception. */ diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 2b9a8f5..4ca9cf9 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -343,7 +343,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,

ret = curmsg; out: - DEB1("}}} transfered %d/%d messages. " + DEB1("}}} transferred %d/%d messages. " "status is %#04x. control is %#04x\n", curmsg, num, pca_status(adap), pca_get_con(adap)); diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 906a3ca5..dd36417 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -295,7 +295,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) }

/* Unfortunately the ALI SMB controller maps "no response" and "bus - * collision" into a single bit. No reponse is the usual case so don't + * collision" into a single bit. No response is the usual case so don't * do a printk. This means that bus collisions go unreported. */ if (temp & ALI1535_STS_BUSERR) { diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index b14f6d6..83e8a60 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -318,7 +318,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)

/* Unfortunately the ALI SMB controller maps "no response" and "bus - collision" into a single bit. No reponse is the usual case so don't + collision" into a single bit. No response is the usual case so don't do a printk. This means that bus collisions go unreported. */ diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 5795c83..a76d85f 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -355,7 +355,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) /* * Write mode register first as needed for correct behaviour * on OMAP-L138, but don't set STT yet to avoid a race with XRDY - * occuring before we have loaded DXR + * occurring before we have loaded DXR */ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);

diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c index b664ed8..b7a51c4 100644 --- a/drivers/i2c/busses/i2c-designware.c +++ b/drivers/i2c/busses/i2c-designware.c @@ -178,7 +178,7 @@ static char *abort_sources[] = { * @lock: protect this struct and IO registers * @clk: input reference clock * @cmd_err: run time hadware error code - * @msgs: points to an array of messages currently being transfered + * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs * @msg_write_idx: the element index of the current tx message in the msgs * array diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index e5b1a3b..37e2e82 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -22,7 +22,7 @@ /* With some changes from Kyösti Mälkki kmalkki@cc.hut.fi and even Frodo Looijaard frodol@dds.nl */

-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of +/* Partially rewriten by Oleg I. Vdovikin for mmapped support of for Alpha Processor Inc. UP-2000(+) boards */

#include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ed2e0c5..72c0415 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -96,7 +96,7 @@ #define SMBHSTCFG_SMB_SMI_EN 2 #define SMBHSTCFG_I2C_EN 4

-/* Auxillary control register bits, ICH4+ only */ +/* Auxiliary control register bits, ICH4+ only */ #define SMBAUXCTL_CRC 1 #define SMBAUXCTL_E32B 2

diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index e4f88dc..3c110fb 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -494,7 +494,7 @@ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, if (unlikely(ret < 0)) break; else if (unlikely(ret != count)){ - DBG("%d: xfer_bytes, requested %d, transfered %d\n", + DBG("%d: xfer_bytes, requested %d, transferred %d\n", dev->idx, count, ret);

/* If it's not a last part of xfer, abort it */ @@ -593,7 +593,7 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){ DBG("%d: iic_xfer, bus is not free\n", dev->idx);

- /* Usually it means something serious has happend. + /* Usually it means something serious has happened. * We *cannot* have unfinished previous transfer * so it doesn't make any sense to try to stop it. * Probably we were not able to recover from the diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c index c714927..e828ac8 100644 --- a/drivers/i2c/busses/i2c-intel-mid.c +++ b/drivers/i2c/busses/i2c-intel-mid.c @@ -170,8 +170,8 @@ struct intel_mid_i2c_private { /* Raw Interrupt Status Register */ #define IC_RAW_INTR_STAT 0x34 /* Read Only */ #define GEN_CALL (1 << 11) /* General call */ -#define START_DET (1 << 10) /* (RE)START occured */ -#define STOP_DET (1 << 9) /* STOP occured */ +#define START_DET (1 << 10) /* (RE)START occurred */ +#define STOP_DET (1 << 9) /* STOP occurred */ #define ACTIVITY (1 << 8) /* Bus busy */ #define RX_DONE (1 << 7) /* Not used in Master mode */ #define TX_ABRT (1 << 6) /* Transmit Abort */ @@ -375,7 +375,7 @@ static int intel_mid_i2c_disable(struct i2c_adapter *adap) * I2C should be disabled prior to other register operation. If failed, an * errno is returned. Mask and Clear all interrpts, this should be done at * first. Set common registers which will not be modified during normal - * transfers, including: controll register, FIFO threshold and clock freq. + * transfers, including: control register, FIFO threshold and clock freq. * Check APB data width at last. */ static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c) @@ -455,7 +455,7 @@ static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1, * * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be * distingushed. At present, no circumstances have been found out that - * multiple errors would be occured simutaneously, so we simply use the + * multiple errors would be occurred simutaneously, so we simply use the * register value directly. * * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need @@ -469,7 +469,7 @@ static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)

/* Single transfer error check: * According to databook, TX/RX FIFOs would be flushed when - * the abort interrupt occured. + * the abort interrupt occurred. */ if (abort & ABRT_MASTER_DIS) dev_err(&adap->dev, @@ -569,7 +569,7 @@ static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) * Return Values: * 0 if the read transfer succeeds * -ETIMEDOUT if we cannot read the "raw" interrupt register - * -EINVAL if a transfer abort occured + * -EINVAL if a transfer abort occurred * * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to * data transfer. The actual "write" operation will be performed when the @@ -697,7 +697,7 @@ static int intel_mid_i2c_setup(struct i2c_adapter *adap, struct i2c_msg *pmsg) * @num: number of i2c_msg * * Return Values: - * + number of messages transfered + * + number of messages transferred * -ETIMEDOUT If cannot disable I2C controller or read IC_STATUS * -EINVAL If the address in i2c_msg is invalid * diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index ddc258e..0682f8f 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -141,7 +141,7 @@ static int sch_transaction(void) * This is the main access entry for i2c-sch access * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write * (0 for read and 1 for write), size is i2c transaction type and data is the - * union of transaction for data to be transfered or data read from bus. + * union of transaction for data to be transferred or data read from bus. * return 0 for success and others for failure. */ static s32 sch_access(struct i2c_adapter *adap, u16 addr, diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index caf96dc..7e78f7c 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -149,7 +149,7 @@ static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, * We have to copy the slave address (u8) and buffer (arbitrary number * of u8) into the data register (u32). To achieve that, the u8 are put * into the MSBs of 'data' which is then shifted for the next u8. When - * apropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 + * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 * looks like this: * * 3 2 1 0 diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 594ed50..e10e5cf 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -126,9 +126,9 @@ enum i2c_operation { /** * struct i2c_nmk_client - client specific data * @slave_adr: 7-bit slave address - * @count: no. bytes to be transfered + * @count: no. bytes to be transferred * @buffer: client data buffer - * @xfer_bytes: bytes transfered till now + * @xfer_bytes: bytes transferred till now * @operation: current I2C operation */ struct i2c_nmk_client { @@ -330,7 +330,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * slsu defines the data setup time after SCL clock * stretching in terms of i2c clk cycles. The * needed setup time for the three modes are 250ns, - * 100ns, 10ns repectively thus leading to the values + * 100ns, 10ns respectively thus leading to the values * of 14, 6, 2 for a 48 MHz i2c clk. */ writel(dev->cfg.slsu << 16, dev->virtbase + I2C_SCR); @@ -364,7 +364,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) /* * set the speed mode. Currently we support * only standard and fast mode of operation - * TODO - support for fast mode plus (upto 1Mb/s) + * TODO - support for fast mode plus (up to 1Mb/s) * and high speed (up to 3.4 Mb/s) */ if (dev->cfg.sm > I2C_FREQ_MODE_FAST) { diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c index cadc021..cb5d01e 100644 --- a/drivers/i2c/busses/i2c-s6000.c +++ b/drivers/i2c/busses/i2c-s6000.c @@ -318,7 +318,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev) rc = request_irq(iface->irq, s6i2c_interrupt_entry, IRQF_SHARED, dev->name, iface); if (rc) { - dev_err(&p_adap->dev, "s6i2c: cant get IRQ %d\n", iface->irq); + dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq); goto err_clk_dis; }

diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 266135d..9987961 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) u32 val; int i = 0;

- /* Locate the apropriate clock setting */ + /* Locate the appropriate clock setting */ while (i < ARRAY_SIZE(stu300_clktable) - 1 && stu300_clktable[i].rate < clkrate) i++; @@ -644,7 +644,7 @@ static int stu300_send_address(struct stu300_dev *dev, ret = stu300_await_event(dev, STU300_EVENT_6);

/* - * Clear any pending EVENT 6 no matter what happend during + * Clear any pending EVENT 6 no matter what happened during * await_event. */ val = stu300_r8(dev->virtbase + I2C_CR); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 3921f66..b4ab39b 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -386,7 +386,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); return IRQ_HANDLED; err: - /* An error occured, mask all interrupts */ + /* An error occurred, mask all interrupts */ tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST | I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ | I2C_INT_RX_FIFO_DATA_REQ); diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 9fbd7e6..e9d5ff4 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -21,7 +21,7 @@ * to the automotive development board Russellville. The copyright holder * as seen in the header is Intel corporation. * Mocean Laboratories forked off the GNU/Linux platform work into a - * separate company called Pelagicore AB, which commited the code to the + * separate company called Pelagicore AB, which committed the code to the * kernel. */

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e5f76a0..70c30e6 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -348,7 +348,7 @@ EXPORT_SYMBOL(i2c_verify_client);

/* This is a permissive address validity check, I2C address map constraints - * are purposedly not enforced, except for the general call address. */ + * are purposely not enforced, except for the general call address. */ static int i2c_check_client_addr_validity(const struct i2c_client *client) { if (client->flags & I2C_CLIENT_TEN) { diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 9383f67..3be60da 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -67,7 +67,7 @@ static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)

/* * note: below we set the value for Bus Master IDE TimeOut Register - * I'm not absolutly sure what this does, but it solved my problem + * I'm not absolutely sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with * my IDE driver at the same time :-) * diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 5406b6e..5a702d0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -107,7 +107,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc) static void ide_floppy_report_error(struct ide_disk_obj *floppy, struct ide_atapi_pc *pc) { - /* supress error messages resulting from Medium not present */ + /* suppress error messages resulting from Medium not present */ if (floppy->sense_key == 0x02 && floppy->asc == 0x3a && floppy->ascq == 0x00) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 34b9872..600c89a 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -201,7 +201,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat;

/* - * Last sector was transfered, wait until device is ready. This can + * Last sector was transferred, wait until device is ready. This can * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ for (retries = 0; retries < 1000; retries++) { diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index 1bdca49..b59d04c 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -8,8 +8,8 @@ * * Documentation: * - * Publically available from Intel web site. Errata documentation - * is also publically available. As an aide to anyone hacking on this + * Publicly available from Intel web site. Errata documentation + * is also publicly available. As an aide to anyone hacking on this * driver the list of errata that are relevant is below.going back to * PIIX4. Older device documentation is now a bit tricky to find. * diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c index db7f4e7..4a00225 100644 --- a/drivers/ide/sis5513.c +++ b/drivers/ide/sis5513.c @@ -53,7 +53,7 @@

#define DRV_NAME "sis5513"

-/* registers layout and init values are chipset family dependant */ +/* registers layout and init values are chipset family dependent */

#define ATA_16 0x01 #define ATA_33 0x02 @@ -406,7 +406,7 @@ static int __devinit sis_find_family(struct pci_dev *dev) pci_name(dev)); chipset_family = ATA_133;

- /* Check for 5513 compability mapping + /* Check for 5513 compatibility mapping * We must use this, else the port enabled code will fail, * as it expects the enablebits at 0x4a. */ diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index 7953447..e53a1b7 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c @@ -22,7 +22,7 @@ * Loosely based on the piix & svwks drivers. * * Documentation: - * Not publically available. + * Not publicly available. */

#include <linux/types.h> diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index d2a0997..f46f49c 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -14,7 +14,7 @@ * Andre Hedrick * * Documentation: - * Obsolete device documentation publically available from via.com.tw + * Obsolete device documentation publicly available from via.com.tw * Current device documentation available under NDA only */

diff --git a/drivers/infiniband/hw/amso1100/c2_ae.c b/drivers/infiniband/hw/amso1100/c2_ae.c index 62af742..24f9e3a 100644 --- a/drivers/infiniband/hw/amso1100/c2_ae.c +++ b/drivers/infiniband/hw/amso1100/c2_ae.c @@ -157,7 +157,7 @@ void c2_ae_event(struct c2_dev *c2dev, u32 mq_index) int status;

/* - * retreive the message + * retrieve the message */ wr = c2_mq_consume(mq); if (!wr) diff --git a/drivers/infiniband/hw/amso1100/c2_qp.c b/drivers/infiniband/hw/amso1100/c2_qp.c index d8f4bb8..0d7b6f23 100644 --- a/drivers/infiniband/hw/amso1100/c2_qp.c +++ b/drivers/infiniband/hw/amso1100/c2_qp.c @@ -612,7 +612,7 @@ void c2_free_qp(struct c2_dev *c2dev, struct c2_qp *qp) c2_unlock_cqs(send_cq, recv_cq);

/* - * Destory qp in the rnic... + * Destroy qp in the rnic... */ destroy_qp(c2dev, qp);

diff --git a/drivers/infiniband/hw/amso1100/c2_wr.h b/drivers/infiniband/hw/amso1100/c2_wr.h index c65fbdd..8d4b4ca 100644 --- a/drivers/infiniband/hw/amso1100/c2_wr.h +++ b/drivers/infiniband/hw/amso1100/c2_wr.h @@ -131,7 +131,7 @@ enum c2wr_ids { * All the preceding IDs are fixed, and must not change. * You can add new IDs, but must not remove or reorder * any IDs. If you do, YOU will ruin any hope of - * compatability between versions. + * compatibility between versions. */ CCWR_LAST,

@@ -242,7 +242,7 @@ enum c2_acf { /* * to fix bug 1815 we define the max size allowable of the * terminate message (per the IETF spec).Refer to the IETF - * protocal specification, section 12.1.6, page 64) + * protocol specification, section 12.1.6, page 64) * The message is prefixed by 20 types of DDP info. * * Then the message has 6 bytes for the terminate control diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 47db4bf3..58c0e41 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -2392,7 +2392,7 @@ void ipath_shutdown_device(struct ipath_devdata *dd) /* * clear SerdesEnable and turn the leds off; do this here because * we are unloading, so don't count on interrupts to move along - * Turn the LEDs off explictly for the same reason. + * Turn the LEDs off explicitly for the same reason. */ dd->ipath_f_quiet_serdes(dd);

diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 6d4b29c..ee79a2d 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -1972,7 +1972,7 @@ static int ipath_do_user_init(struct file *fp, * 0 to 1. So for those chips, we turn it off and then back on. * This will (very briefly) affect any other open ports, but the * duration is very short, and therefore isn't an issue. We - * explictly set the in-memory tail copy to 0 beforehand, so we + * explicitly set the in-memory tail copy to 0 beforehand, so we * don't have to wait to be sure the DMA update has happened * (chip resets head/tail to 0 on transition to enable). */ diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index fef0f42..7c1eebe 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -335,7 +335,7 @@ done: * @dd: the infinipath device * * sanity check at least some of the values after reset, and - * ensure no receive or transmit (explictly, in case reset + * ensure no receive or transmit (explicitly, in case reset * failed */ static int init_chip_reset(struct ipath_devdata *dd) diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c index 7420715..e8a2a91 100644 --- a/drivers/infiniband/hw/ipath/ipath_ud.c +++ b/drivers/infiniband/hw/ipath/ipath_ud.c @@ -86,7 +86,7 @@ static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe) }

/* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ length = swqe->length; @@ -515,7 +515,7 @@ void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, }

/* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ wc.byte_len = tlen + sizeof(struct ib_grh); diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c index be78f66..f5cb13b 100644 --- a/drivers/infiniband/hw/ipath/ipath_user_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c @@ -236,7 +236,7 @@ static int ipath_user_sdma_num_pages(const struct iovec *iov) return 1 + ((epage - spage) >> PAGE_SHIFT); }

-/* truncate length to page boundry */ +/* truncate length to page boundary */ static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len) { const unsigned long offset = addr & ~PAGE_MASK; diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index cfa3a2b..33c7eed 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1397,7 +1397,7 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node) cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSING; send_ack(cm_node, NULL); - /* Wait for ACK as this is simultanous close.. + /* Wait for ACK as this is simultaneous close.. * After we receive ACK, do not send anything.. * Just rm the node.. Done.. */ break; diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 08c1948..10d0a5e 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -80,7 +80,7 @@ static void nes_terminate_start_timer(struct nes_qp *nesqp);

#ifdef CONFIG_INFINIBAND_NES_DEBUG static unsigned char *nes_iwarp_state_str[] = { - "Non-Existant", + "Non-Existent", "Idle", "RTS", "Closing", @@ -91,7 +91,7 @@ static unsigned char *nes_iwarp_state_str[] = { };

static unsigned char *nes_tcp_state_str[] = { - "Non-Existant", + "Non-Existent", "Closed", "Listen", "SYN Sent", diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 2c9c193..e96b8fb 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -902,7 +902,7 @@ static void nes_netdev_set_multicast_list(struct net_device *netdev) nes_write_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL, nic_active); }

- nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscous = %d, All Multicast = %d.\n", + nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscuous = %d, All Multicast = %d.\n", mc_count, !!(netdev->flags & IFF_PROMISC), !!(netdev->flags & IFF_ALLMULTI)); if (!mc_all_on) { diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index 73225ee..769a1d9 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -653,7 +653,7 @@ struct diag_observer_list_elt;

/* device data struct now contains only "general per-device" info. * fields related to a physical IB port are in a qib_pportdata struct, - * described above) while fields only used by a particualr chip-type are in + * described above) while fields only used by a particular chip-type are in * a qib_chipdata struct, whose contents are opaque to this file. */ struct qib_devdata { diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index 75bfad1..406fca5 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -1539,7 +1539,7 @@ done_chk_sdma:

/* * If process has NOT already set it's affinity, select and - * reserve a processor for it, as a rendevous for all + * reserve a processor for it, as a rendezvous for all * users of the driver. If they don't actually later * set affinity to this cpu, or set it to some other cpu, * it just means that sooner or later we don't recommend @@ -1657,7 +1657,7 @@ static int qib_do_user_init(struct file *fp, * 0 to 1. So for those chips, we turn it off and then back on. * This will (very briefly) affect any other open ctxts, but the * duration is very short, and therefore isn't an issue. We - * explictly set the in-memory tail copy to 0 beforehand, so we + * explicitly set the in-memory tail copy to 0 beforehand, so we * don't have to wait to be sure the DMA update has happened * (chip resets head/tail to 0 on transition to enable). */ diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c index 774dea8..7de4b7eb 100644 --- a/drivers/infiniband/hw/qib/qib_iba6120.c +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -1799,7 +1799,7 @@ static int qib_6120_setup_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isnt' set. + * isn't' set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ @@ -2171,7 +2171,7 @@ static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op, * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't - * know, we have to do it explictly. + * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index de799f1..74fe036 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -2111,7 +2111,7 @@ static int qib_setup_7220_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isnt' set. + * isn't' set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ @@ -2479,7 +2479,7 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) * we command the link down. As with width, only write the * actual register if the link is currently down, otherwise * takes effect on next link change. Since setting is being - * explictly requested (via MAD or sysfs), clear autoneg + * explicitly requested (via MAD or sysfs), clear autoneg * failure status if speed autoneg is enabled. */ ppd->link_speed_enabled = val; @@ -2778,7 +2778,7 @@ static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op, * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't - * know, we have to do it explictly. + * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 4a2d21e..55de3cf 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -3299,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isnt' set. + * isn't' set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); dd->flags |= QIB_DOING_RESET; @@ -3727,7 +3727,7 @@ static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) /* * As with width, only write the actual register if the * link is currently down, otherwise takes effect on next - * link change. Since setting is being explictly requested + * link change. Since setting is being explicitly requested * (via MAD or sysfs), clear autoneg failure status if speed * autoneg is enabled. */ @@ -4163,7 +4163,7 @@ static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't - * know, we have to do it explictly. + * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); @@ -7483,7 +7483,7 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd) /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ /* Data Rate Select [5:7-6] (leave as default) */ - /* RX Parralel Word Width [3:10-8] (leave as default) */ + /* RX Parallel Word Width [3:10-8] (leave as default) */

/* RX REST */ /* Single- or Multi-channel reset */ diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c index ffefb78..a01f3fc 100644 --- a/drivers/infiniband/hw/qib/qib_init.c +++ b/drivers/infiniband/hw/qib/qib_init.c @@ -346,7 +346,7 @@ done: * @dd: the qlogic_ib device * * sanity check at least some of the values after reset, and - * ensure no receive or transmit (explictly, in case reset + * ensure no receive or transmit (explicitly, in case reset * failed */ static int init_after_reset(struct qib_devdata *dd) diff --git a/drivers/infiniband/hw/qib/qib_mad.h b/drivers/infiniband/hw/qib/qib_mad.h index 147aff9..7840ab5 100644 --- a/drivers/infiniband/hw/qib/qib_mad.h +++ b/drivers/infiniband/hw/qib/qib_mad.h @@ -73,7 +73,7 @@ struct ib_mad_notice_attr {

struct { __be16 reserved; - __be16 lid; /* LID where change occured */ + __be16 lid; /* LID where change occurred */ u8 reserved2; u8 local_changes; /* low bit - local changes */ __be32 new_cap_mask; /* new capability mask */ diff --git a/drivers/infiniband/hw/qib/qib_twsi.c b/drivers/infiniband/hw/qib/qib_twsi.c index 6f31ca5..ddde72e 100644 --- a/drivers/infiniband/hw/qib/qib_twsi.c +++ b/drivers/infiniband/hw/qib/qib_twsi.c @@ -41,7 +41,7 @@ * QLogic_IB "Two Wire Serial Interface" driver. * Originally written for a not-quite-i2c serial eeprom, which is * still used on some supported boards. Later boards have added a - * variety of other uses, most board-specific, so teh bit-boffing + * variety of other uses, most board-specific, so the bit-boffing * part has been split off to this file, while the other parts * have been moved to chip-specific files. * diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c index 4a51fd1..828609f 100644 --- a/drivers/infiniband/hw/qib/qib_ud.c +++ b/drivers/infiniband/hw/qib/qib_ud.c @@ -116,7 +116,7 @@ static void qib_ud_loopback(struct qib_qp *sqp, struct qib_swqe *swqe) }

/* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ length = swqe->length; @@ -520,7 +520,7 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr, goto drop;

/* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ wc.byte_len = tlen + sizeof(struct ib_grh); diff --git a/drivers/infiniband/hw/qib/qib_user_sdma.c b/drivers/infiniband/hw/qib/qib_user_sdma.c index 66208bc..8244208 100644 --- a/drivers/infiniband/hw/qib/qib_user_sdma.c +++ b/drivers/infiniband/hw/qib/qib_user_sdma.c @@ -239,7 +239,7 @@ static int qib_user_sdma_num_pages(const struct iovec *iov) }

/* - * Truncate length to page boundry. + * Truncate length to page boundary. */ static int qib_user_sdma_page_length(unsigned long addr, unsigned long len) { diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index f1df015..2f02ab0 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -91,7 +91,7 @@ #define SIZE_4K (1UL << SHIFT_4K) #define MASK_4K (~(SIZE_4K-1))

- /* support upto 512KB in one RDMA */ + /* support up to 512KB in one RDMA */ #define ISCSI_ISER_SG_TABLESIZE (0x80000 >> SHIFT_4K) #define ISER_DEF_CMD_PER_LUN 128

diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 3182c9c..5688b5c 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -758,7 +758,7 @@ static void joydev_remove_chrdev(struct joydev *joydev) }

/* - * Mark device non-existant. This disables writes, ioctls and + * Mark device non-existent. This disables writes, ioctls and * prevents new users from opening the device. Already posted * blocking reads will stay, however new ones will fail. */ @@ -777,7 +777,7 @@ static void joydev_cleanup(struct joydev *joydev) joydev_hangup(joydev); joydev_remove_chrdev(joydev);

- /* joydev is marked dead so noone else accesses joydev->open */ + /* joydev is marked dead so no one else accesses joydev->open */ if (joydev->open) input_close_device(handle); } diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c index d259b41..1639ab2 100644 --- a/drivers/input/joystick/a3d.c +++ b/drivers/input/joystick/a3d.c @@ -3,7 +3,7 @@ */

/* - * FP-Gaming Assasin 3D joystick driver for Linux + * FP-Gaming Assassin 3D joystick driver for Linux */

/* @@ -34,7 +34,7 @@ #include <linux/input.h> #include <linux/jiffies.h>

-#define DRIVER_DESC "FP-Gaming Assasin 3D joystick driver" +#define DRIVER_DESC "FP-Gaming Assassin 3D joystick driver"

MODULE_AUTHOR("Vojtech Pavlik vojtech@ucw.cz"); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index a91ee94..cd89d17 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -5,7 +5,7 @@ * * Author: Miguel Aguilar miguel.aguilar@ridgerun.com * - * Intial Code: Sandeep Paulraj s-paulraj@ti.com + * Initial Code: Sandeep Paulraj s-paulraj@ti.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c index de5900d..144ddbd 100644 --- a/drivers/input/misc/adxl34x.c +++ b/drivers/input/misc/adxl34x.c @@ -716,7 +716,7 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq, pdata = dev->platform_data; if (!pdata) { dev_dbg(dev, - "No platfrom data: Using default initialization\n"); + "No platform data: Using default initialization\n"); pdata = &adxl34x_default_init; }

diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index a93c5254..fc62256 100644 --- a/drivers/input/misc/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c @@ -312,7 +312,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 5; remote->data.bits_left -= 5; } else { - err("Bad message recieved, no stop bit found.\n"); + err("Bad message received, no stop bit found.\n"); }

dev_dbg(&remote->udev->dev, diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 12501de..52b4193 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -274,7 +274,7 @@ static struct key_entry keymap_fs_amilo_pro_v3505[] __initdata = { { KE_BLUETOOTH, 0x30 }, /* Fn+F10 */ { KE_KEY, 0x31, {KEY_MAIL} }, /* mail button */ { KE_KEY, 0x36, {KEY_WWW} }, /* www button */ - { KE_WIFI, 0x78 }, /* satelite dish button */ + { KE_WIFI, 0x78 }, /* satellite dish button */ { KE_END, 0 } };

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 3aead91..3126983 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -639,7 +639,7 @@ exit: * device, resulting in trackpad malfunction under certain * circumstances. To get around this problem, there is at least one * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to - * recieve a reset_resume request rather than the normal resume. + * receive a reset_resume request rather than the normal resume. * Since the implementation of reset_resume is equal to mode switch * plus start_traffic, it seems easier to always do the switch when * starting traffic on the device. diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index f6aa26d..cba3c84 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -462,7 +462,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work) * While interrupt driven, there is no real need to poll the device. * But touchpads are very sensitive, so there could be errors * related to physical environment and the attention line isn't - * neccesarily asserted. In such case we can lose the touchpad. + * necessarily asserted. In such case we can lose the touchpad. * We poll the device once in THREAD_IRQ_SLEEP_SECS and * if error is detected, we try to reset and reconfigure the touchpad. */ diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index bf2c0c8..eb9a3cf 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -334,7 +334,7 @@ static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse) * M: manufacturer location code * R: revision code * E: Error code. If it's in the range of 0x00..0x1f, only some - * minor problem occured. Errors >= 0x20 are considered bad + * minor problem occurred. Errors >= 0x20 are considered bad * and the device may not work properly... * D: <0010> == mouse, <0100> == tablet */ diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 8c0b51c..4220620 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);

ret = hp_sdc_init(); - /* after successfull initialization give SDC some time to settle + /* after successful initialization give SDC some time to settle * and then load the hp_sdc_mlc upper layer driver */ if (!ret) schedule_delayed_work(&moduleloader_work, diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c index 7540baf..80baa53 100644 --- a/drivers/input/serio/xilinx_ps2.c +++ b/drivers/input/serio/xilinx_ps2.c @@ -225,7 +225,7 @@ static void sxps2_close(struct serio *pserio) /** * xps2_of_probe - probe method for the PS/2 device. * @of_dev: pointer to OF device structure - * @match: pointer to the stucture used for matching a device + * @match: pointer to the structure used for matching a device * * This function probes the PS/2 device in the device tree. * It initializes the driver data structure and the hardware. diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c index c0307b2..66c96bf 100644 --- a/drivers/input/touchscreen/intel-mid-touch.c +++ b/drivers/input/touchscreen/intel-mid-touch.c @@ -542,7 +542,7 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) * ADC power on, start, enable PENDET and set loop delay * ADC loop delay is set to 4.5 ms approximately * Loop delay more than this results in jitter in adc readings - * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET + * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET * interrupt generation sometimes. */

diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 028a536..3b5b5df 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -6,7 +6,7 @@ * Copyright: MontaVista Software, Inc. * * Spliting done by: Marek Vasut marek.vasut@gmail.com - * If something doesnt work and it worked before spliting, e-mail me, + * If something doesn't work and it worked before spliting, e-mail me, * dont bother Nicolas please ;-) * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c index 6b5be74..98e6117 100644 --- a/drivers/input/touchscreen/wm9705.c +++ b/drivers/input/touchscreen/wm9705.c @@ -306,7 +306,7 @@ static int wm9705_acc_enable(struct wm97xx *wm, int enable) dig2 = wm->dig[2];

if (enable) { - /* continous mode */ + /* continuous mode */ if (wm->mach_ops->acc_startup && (ret = wm->mach_ops->acc_startup(wm)) < 0) return ret; diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c index 7490b05..2bc2fb8 100644 --- a/drivers/input/touchscreen/wm9712.c +++ b/drivers/input/touchscreen/wm9712.c @@ -419,7 +419,7 @@ static int wm9712_acc_enable(struct wm97xx *wm, int enable) dig2 = wm->dig[2];

if (enable) { - /* continous mode */ + /* continuous mode */ if (wm->mach_ops->acc_startup) { ret = wm->mach_ops->acc_startup(wm); if (ret < 0) diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c index 238b5132..73ec995 100644 --- a/drivers/input/touchscreen/wm9713.c +++ b/drivers/input/touchscreen/wm9713.c @@ -431,7 +431,7 @@ static int wm9713_acc_enable(struct wm97xx *wm, int enable) dig3 = wm->dig[2];

if (enable) { - /* continous mode */ + /* continuous mode */ if (wm->mach_ops->acc_startup && (ret = wm->mach_ops->acc_startup(wm)) < 0) return ret; diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 6b75c9f..5dbe73a 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -335,7 +335,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work) */ if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) { if (wm->pen_is_down && !pen_was_down) { - /* Data is not availiable immediately on pen down */ + /* Data is not available immediately on pen down */ queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1); }

@@ -354,7 +354,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work) * Codec PENDOWN irq handler * * We have to disable the codec interrupt in the handler because it - * can take upto 1ms to clear the interrupt source. We schedule a task + * can take up to 1ms to clear the interrupt source. We schedule a task * in a work queue to do the actual interaction with the chip. The * interrupt is then enabled again in the slow handler when the source * has been cleared. diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h index 9f5b680..e330da0 100644 --- a/drivers/isdn/hardware/eicon/divacapi.h +++ b/drivers/isdn/hardware/eicon/divacapi.h @@ -673,7 +673,7 @@ struct async_s {

/*------------------------------------------------------------------*/ -/* auxilliary states for supplementary services */ +/* auxiliary states for supplementary services */ /*------------------------------------------------------------------*/

#define IDLE 0 diff --git a/drivers/isdn/hardware/eicon/io.h b/drivers/isdn/hardware/eicon/io.h index 0c6c650..a6f1755 100644 --- a/drivers/isdn/hardware/eicon/io.h +++ b/drivers/isdn/hardware/eicon/io.h @@ -60,7 +60,7 @@ typedef struct _diva_xdi_capi_cfg { -------------------------------------------------------------------------- */ struct _ISDN_ADAPTER { void (* DIRequest)(PISDN_ADAPTER, ENTITY *) ; - int State ; /* from NT4 1.srv, a good idea, but a poor achievment */ + int State ; /* from NT4 1.srv, a good idea, but a poor achievement */ int Initialized ; int RegisteredWithDidd ; int Unavailable ; /* callback function possible? */ diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 341ef17..8c5c563 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -2639,7 +2639,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, } else { - /* local reply if assign unsuccessfull + /* local reply if assign unsuccessful or B3 protocol allows only one layer 3 connection and already connected or B2 protocol not any LAPD @@ -8189,7 +8189,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) dlc[ 0] = 15; if(b2_config->length >= 8) { /* PIAFS control abilities */ dlc[ 7] = 10; - dlc[16] = 2; /* Length of PIAFS extention */ + dlc[16] = 2; /* Length of PIAFS extension */ dlc[17] = PIAFS_UDATA_ABILITIES; /* control (UDATA) ability */ dlc[18] = b2_config_parms[4].info[0]; /* value */ dlc[ 0] = 18; diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h index 1c69457..bf6b018 100644 --- a/drivers/isdn/hardware/eicon/pc.h +++ b/drivers/isdn/hardware/eicon/pc.h @@ -701,7 +701,7 @@ Byte | 8 7 6 5 4 3 2 1 #define PROTCAP_FREE12 0x1000 /* not used */ #define PROTCAP_FREE13 0x2000 /* not used */ #define PROTCAP_FREE14 0x4000 /* not used */ -#define PROTCAP_EXTENSION 0x8000 /* used for future extentions */ +#define PROTCAP_EXTENSION 0x8000 /* used for future extensions */ /* -----------------------------------------------------------* */ /* Onhook data transmission ETS30065901 */ /* Message Type */ diff --git a/drivers/isdn/hardware/eicon/um_idi.c b/drivers/isdn/hardware/eicon/um_idi.c index 6563db9..ac0bdd1 100644 --- a/drivers/isdn/hardware/eicon/um_idi.c +++ b/drivers/isdn/hardware/eicon/um_idi.c @@ -363,7 +363,7 @@ int diva_um_idi_read(void *entity,

if ((ret = (*cp_fn) (os_handle, dst, data, length)) >= 0) { /* - Acknowledge only if read was successfull + Acknowledge only if read was successful */ diva_data_q_ack_segment4read(q); } diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 4e3780d..f6f3c87 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -118,7 +118,7 @@ * -> See hfc_multi.h for HFC_IO_MODE_* values * By default, the IO mode is pci memory IO (MEMIO). * Some cards require specific IO mode, so it cannot be changed. - * It may be usefull to set IO mode to register io (REGIO) to solve + * It may be useful to set IO mode to register io (REGIO) to solve * PCI bridge problems. * If unsure, don't give this parameter. * @@ -903,7 +903,7 @@ vpm_echocan_off(struct hfc_multi *hc, int ch) /* * Speech Design resync feature * NOTE: This is called sometimes outside interrupt handler. - * We must lock irqsave, so no other interrupt (other card) will occurr! + * We must lock irqsave, so no other interrupt (other card) will occur! * Also multiple interrupts may nest, so must lock each access (lists, card)! */ static inline void diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index 15d323b..4343aba 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -272,7 +272,7 @@ reset_hfcpci(struct hfc_pci *hc) * D- and monitor/CI channel are not enabled * STIO1 is used as output for data, B1+B2 from ST->IOM+HFC * STIO2 is used as data input, B1+B2 from IOM->ST - * ST B-channel send disabled -> continous 1s + * ST B-channel send disabled -> continuous 1s * The IOM slots are always enabled */ if (test_bit(HFC_CFG_PCM, &hc->cfg)) { diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c index 3147020..0cb0546 100644 --- a/drivers/isdn/hisax/hfc_pci.c +++ b/drivers/isdn/hisax/hfc_pci.c @@ -146,7 +146,7 @@ reset_hfcpci(struct IsdnCardState *cs) /* D- and monitor/CI channel are not enabled */ /* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */ /* STIO2 is used as data input, B1+B2 from IOM->ST */ - /* ST B-channel send disabled -> continous 1s */ + /* ST B-channel send disabled -> continuous 1s */ /* The IOM slots are always enabled */ cs->hw.hfcpci.conn = 0x36; /* set data flow directions */ Write_hfc(cs, HFCPCI_CONNECT, cs->hw.hfcpci.conn); diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c index 1235b71..156d7c6 100644 --- a/drivers/isdn/hisax/hfc_sx.c +++ b/drivers/isdn/hisax/hfc_sx.c @@ -399,7 +399,7 @@ reset_hfcsx(struct IsdnCardState *cs) /* D- and monitor/CI channel are not enabled */ /* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */ /* STIO2 is used as data input, B1+B2 from IOM->ST */ - /* ST B-channel send disabled -> continous 1s */ + /* ST B-channel send disabled -> continuous 1s */ /* The IOM slots are always enabled */ cs->hw.hfcsx.conn = 0x36; /* set data flow directions */ Write_hfc(cs, HFCSX_CONNECT, cs->hw.hfcsx.conn); diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h index e79f565..2f581c0 100644 --- a/drivers/isdn/hisax/hfc_usb.h +++ b/drivers/isdn/hisax/hfc_usb.h @@ -126,7 +126,7 @@ static struct hfcusb_symbolic_list urb_errlist[] = {

/* - * device dependant information to support different + * device dependent information to support different * ISDN Ta's using the HFC-S USB chip */

diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c index cc6ee2d..8e2fd02 100644 --- a/drivers/isdn/hisax/l3dss1.c +++ b/drivers/isdn/hisax/l3dss1.c @@ -1595,7 +1595,7 @@ l3dss1_setup(struct l3_process *pc, u_char pr, void *arg) * Bearer Capabilities */ p = skb->data; - /* only the first occurence 'll be detected ! */ + /* only the first occurrence 'll be detected ! */ if ((p = findie(p, skb->len, 0x04, 0))) { if ((p[1] < 2) || (p[1] > 11)) err = 1; @@ -2161,7 +2161,7 @@ static void l3dss1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)

/***********************************************/ /* handle special commands for this protocol. */ -/* Examples are call independant services like */ +/* Examples are call independent services like */ /* remote operations with dummy callref. */ /***********************************************/ static int l3dss1_cmd_global(struct PStack *st, isdn_ctrl *ic) diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c index f958449..7b229c0 100644 --- a/drivers/isdn/hisax/l3ni1.c +++ b/drivers/isdn/hisax/l3ni1.c @@ -1449,7 +1449,7 @@ l3ni1_setup(struct l3_process *pc, u_char pr, void *arg) * Bearer Capabilities */ p = skb->data; - /* only the first occurence 'll be detected ! */ + /* only the first occurrence 'll be detected ! */ if ((p = findie(p, skb->len, 0x04, 0))) { if ((p[1] < 2) || (p[1] > 11)) err = 1; @@ -2017,7 +2017,7 @@ static void l3ni1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)

/***********************************************/ /* handle special commands for this protocol. */ -/* Examples are call independant services like */ +/* Examples are call independent services like */ /* remote operations with dummy callref. */ /***********************************************/ static int l3ni1_cmd_global(struct PStack *st, isdn_ctrl *ic) diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c index 2344e7b..a1b8952 100644 --- a/drivers/isdn/hisax/nj_s.c +++ b/drivers/isdn/hisax/nj_s.c @@ -167,7 +167,7 @@ static int __devinit njs_pci_probe(struct pci_dev *dev_netjet, return(0); } /* the TJ300 and TJ320 must be detected, the IRQ handling is different - * unfortunatly the chips use the same device ID, but the TJ320 has + * unfortunately the chips use the same device ID, but the TJ320 has * the bit20 in status PCI cfg register set */ pci_read_config_dword(dev_netjet, 0x04, &cfg); diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c index e56e5af..ed4bc56 100644 --- a/drivers/isdn/hisax/st5481_b.c +++ b/drivers/isdn/hisax/st5481_b.c @@ -124,7 +124,7 @@ static void usb_b_out(struct st5481_bcs *bcs,int buf_nr) }

/* - * Start transfering (flags or data) on the B channel, since + * Start transferring (flags or data) on the B channel, since * FIFO counters has been set to a non-zero value. */ static void st5481B_start_xfer(void *context) diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c index 10d41c5..159e8fa 100644 --- a/drivers/isdn/hisax/st5481_usb.c +++ b/drivers/isdn/hisax/st5481_usb.c @@ -470,7 +470,7 @@ void st5481_release_isocpipes(struct urb* urb[2])

/* * Decode frames received on the B/D channel. - * Note that this function will be called continously + * Note that this function will be called continuously * with 64Kbit/s / 16Kbit/s of data and hence it will be * called 50 times per second with 20 ISOC descriptors. * Called at interrupt. diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 282a446..aa25e18 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -9,7 +9,7 @@ Also inspired by ELSA PCMCIA driver by Klaus Lichtenwalder Lichtenwalder@ACM.org

- Extentions to new hisax_pcmcia by Karsten Keil + Extensions to new hisax_pcmcia by Karsten Keil

minor changes to be compatible with kernel 2.4.x by Jan.Schubert@GMX.li diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c index 81db4a1..3674d30 100644 --- a/drivers/isdn/hysdn/hysdn_sched.c +++ b/drivers/isdn/hysdn/hysdn_sched.c @@ -143,7 +143,7 @@ hysdn_sched_tx(hysdn_card *card, unsigned char *buf, /* send one config line to the card and return 0 if successful, otherwise a */ /* negative error code. */ /* The function works with timeouts perhaps not giving the greatest speed */ -/* sending the line, but this should be meaningless beacuse only some lines */ +/* sending the line, but this should be meaningless because only some lines */ /* are to be sent and this happens very seldom. */ /*****************************************************************************/ int diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index afeede7..2a7d17c 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1530,7 +1530,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data) printk (KERN_WARNING "UPDOWN: Line protocol on Interface %s," " changed state to down\n", lp->netdev->dev->name); - /* should stop routing higher-level data accross */ + /* should stop routing higher-level data across */ } else if ((!lp->cisco_line_state) && (myseq_diff >= 0) && (myseq_diff <= 2)) { /* line down -> up */ @@ -1538,7 +1538,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data) printk (KERN_WARNING "UPDOWN: Line protocol on Interface %s," " changed state to up\n", lp->netdev->dev->name); - /* restart routing higher-level data accross */ + /* restart routing higher-level data across */ }

if (lp->cisco_debserint) diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 9e8162c..1b002b0 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -1514,7 +1514,7 @@ int isdn_ppp_autodial_filter(struct sk_buff *skb, isdn_net_local *lp) #define MP_LONGSEQ_MAXBIT ((MP_LONGSEQ_MASK+1)>>1) #define MP_SHORTSEQ_MAXBIT ((MP_SHORTSEQ_MASK+1)>>1)

-/* sequence-wrap safe comparisions (for long sequence)*/ +/* sequence-wrap safe comparisons (for long sequence)*/ #define MP_LT(a,b) ((a-b)&MP_LONGSEQ_MAXBIT) #define MP_LE(a,b) !((b-a)&MP_LONGSEQ_MAXBIT) #define MP_GT(a,b) ((b-a)&MP_LONGSEQ_MAXBIT) @@ -1746,7 +1746,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * then next fragment should be the start of new reassembly * if sequence is contiguous, but we haven't reassembled yet, * keep going. - * if sequence is not contiguous, either clear everyting + * if sequence is not contiguous, either clear everything * below low watermark and set start to the next frag or * clear start ptr. */ diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index 3d88f15..607d846 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -792,7 +792,7 @@ isdn_tty_suspend(char *id, modem_info * info, atemu * m) }

/* isdn_tty_resume() tries to resume a suspended call - * setup of the lower levels before that. unfortunatly here is no + * setup of the lower levels before that. unfortunately here is no * checking for compatibility of used protocols implemented by Q931 * It does the same things like isdn_tty_dial, the last command * is different, may be we can merge it. diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c index b8a1098..d497db0 100644 --- a/drivers/isdn/isdnloop/isdnloop.c +++ b/drivers/isdn/isdnloop/isdnloop.c @@ -954,7 +954,7 @@ isdnloop_parse_cmd(isdnloop_card * card) /* * Put command-strings into the of the 'card'. In reality, execute them * right in place by calling isdnloop_parse_cmd(). Also copy every - * command to the read message ringbuffer, preceeding it with a '>'. + * command to the read message ringbuffer, preceding it with a '>'. * These mesagges can be read at /dev/isdnctrl. * * Parameter: diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h index 18af868..8549431 100644 --- a/drivers/isdn/mISDN/dsp.h +++ b/drivers/isdn/mISDN/dsp.h @@ -21,7 +21,7 @@ /* options may be: * * bit 0 = use ulaw instead of alaw - * bit 1 = enable hfc hardware accelleration for all channels + * bit 1 = enable hfc hardware acceleration for all channels * */ #define DSP_OPT_ULAW (1<<0) diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c index 309bacf..4d395de 100644 --- a/drivers/isdn/mISDN/dsp_cmx.c +++ b/drivers/isdn/mISDN/dsp_cmx.c @@ -1513,7 +1513,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members) /* -> if echo is NOT enabled */ if (!dsp->echo.software) { /* - * -> substract rx-data from conf-data, + * -> subtract rx-data from conf-data, * if tx-data is available, mix */ while (r != rr && t != tt) { @@ -1572,7 +1572,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members) send_packet: /* * send tx-data if enabled - don't filter, - * becuase we want what we send, not what we filtered + * because we want what we send, not what we filtered */ if (dsp->tx_data) { if (tx_data_only) { diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c index 6f5b548..2877291 100644 --- a/drivers/isdn/mISDN/dsp_core.c +++ b/drivers/isdn/mISDN/dsp_core.c @@ -115,7 +115,7 @@ * * The CMX has special functions for conferences with one, two and more * members. It will allow different types of data flow. Receive and transmit - * data to/form upper layer may be swithed on/off individually without loosing + * data to/form upper layer may be swithed on/off individually without losing * features of CMX, Tones and DTMF. * * Echo Cancellation: Sometimes we like to cancel echo from the interface. @@ -127,9 +127,9 @@ * * If all used features can be realized in hardware, and if transmit and/or * receive data ist disabled, the card may not send/receive any data at all. - * Not receiving is usefull if only announcements are played. Not sending is - * usefull if an answering machine records audio. Not sending and receiving is - * usefull during most states of the call. If supported by hardware, tones + * Not receiving is useful if only announcements are played. Not sending is + * useful if an answering machine records audio. Not sending and receiving is + * useful during most states of the call. If supported by hardware, tones * will be played without cpu load. Small PBXs and NT-Mode applications will * not need expensive hardware when processing calls. * diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c index 9ae2d33..5b484c3 100644 --- a/drivers/isdn/mISDN/dsp_dtmf.c +++ b/drivers/isdn/mISDN/dsp_dtmf.c @@ -106,7 +106,7 @@ void dsp_dtmf_hardware(struct dsp *dsp) * tested it allot. it even works with very short tones (40ms). the only * disadvantage is, that it doesn't work good with different volumes of both * tones. this will happen, if accoustically coupled dialers are used. - * it sometimes detects tones during speach, which is normal for decoders. + * it sometimes detects tones during speech, which is normal for decoders. * use sequences to given commands during calls. * * dtmf - points to a structure of the current dtmf state @@ -244,7 +244,7 @@ coefficients: if (result[i] < tresh) { lowgroup = -1; highgroup = -1; - break; /* noise inbetween */ + break; /* noise in between */ } /* good level found. This is allowed only one time per group */ if (i < NCOEFF/2) { diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c index 7dbe54e..4e4440e 100644 --- a/drivers/isdn/mISDN/dsp_tones.c +++ b/drivers/isdn/mISDN/dsp_tones.c @@ -394,7 +394,7 @@ void dsp_tone_copy(struct dsp *dsp, u8 *data, int len) while (len) { /* find sample to start with */ while (42) { - /* warp arround */ + /* wrap around */ if (!pat->seq[index]) { count = 0; index = 0; diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index bd526f6..22f8ec8 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -179,7 +179,7 @@ NOTE: A value of 0 equals 256 bytes of data. - Time Base = Timestamp of first sample in frame The "Time Base" is used to rearange packets and to detect packet loss. The 16 bits are sent in network order (MSB first) and count 1/8000 th of a -second. This causes a wrap arround each 8,192 seconds. There is no requirement +second. This causes a wrap around each 8,192 seconds. There is no requirement for the initial "Time Base", but 0 should be used for the first packet. In case of HDLC data, this timestamp counts the packet or byte number.

@@ -205,7 +205,7 @@ On Demand:

If the ondemand parameter is given, the remote IP is set to 0 on timeout. This will stop keepalive traffic to remote. If the remote is online again, -traffic will continue to the remote address. This is usefull for road warriors. +traffic will continue to the remote address. This is useful for road warriors. This feature only works with ID set, otherwhise it is highly unsecure.

@@ -590,7 +590,7 @@ multiframe: return; } } else - mlen = len-2; /* single frame, substract timebase */ + mlen = len-2; /* single frame, subtract timebase */

if (len < 2) { printk(KERN_WARNING "%s: packet error - packet too short, time " diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c index 4ae7505..d0aeb44 100644 --- a/drivers/isdn/mISDN/layer2.c +++ b/drivers/isdn/mISDN/layer2.c @@ -1864,7 +1864,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb) psapi >>= 2; ptei >>= 1; if (psapi != l2->sapi) { - /* not our bussiness */ + /* not our business */ if (*debug & DEBUG_L2) printk(KERN_DEBUG "%s: sapi %d/%d mismatch\n", __func__, psapi, l2->sapi); @@ -1872,7 +1872,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb) return 0; } if ((ptei != l2->tei) && (ptei != GROUP_TEI)) { - /* not our bussiness */ + /* not our business */ if (*debug & DEBUG_L2) printk(KERN_DEBUG "%s: tei %d/%d mismatch\n", __func__, ptei, l2->tei); diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index afac338..5bf63af 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -58,7 +58,7 @@ static struct i2c_driver pca9532_driver = { .id_table = pca9532_id, };

-/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly, +/* We have two pwm/blinkers, but 16 possible leds to drive. Additionally, * the clever Thecus people are using one pwm to drive the beeper. So, * as a compromise we average one pwm to the values requested by all * leds that are not ON/OFF. diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c index a045232..f14edd8 100644 --- a/drivers/leds/leds-wm8350.c +++ b/drivers/leds/leds-wm8350.c @@ -215,13 +215,13 @@ static int wm8350_led_probe(struct platform_device *pdev)

isink = regulator_get(&pdev->dev, "led_isink"); if (IS_ERR(isink)) { - printk(KERN_ERR "%s: cant get ISINK\n", __func__); + printk(KERN_ERR "%s: can't get ISINK\n", __func__); return PTR_ERR(isink); }

dcdc = regulator_get(&pdev->dev, "led_vcc"); if (IS_ERR(dcdc)) { - printk(KERN_ERR "%s: cant get DCDC\n", __func__); + printk(KERN_ERR "%s: can't get DCDC\n", __func__); ret = PTR_ERR(dcdc); goto err_isink; } diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 3c781cd..948c547 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -130,7 +130,7 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) rcu_assign_pointer(lg->eventfds, new);

/* - * We're not in a big hurry. Wait until noone's looking at old + * We're not in a big hurry. Wait until no one's looking at old * version, then free it. */ synchronize_rcu(); diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index 5396c67..09d72bb 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -328,7 +328,7 @@ adbhid_input_keycode(int id, int scancode, int repeat) switch (keycode) { case ADB_KEY_CAPSLOCK: if (!restore_capslock_events) { - /* Generate down/up events for CapsLock everytime. */ + /* Generate down/up events for CapsLock every time. */ input_report_key(ahid->input, KEY_CAPSLOCK, 1); input_sync(ahid->input); input_report_key(ahid->input, KEY_CAPSLOCK, 0); diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c index bd6da7a..b6ef8f5 100644 --- a/drivers/macintosh/macio-adb.c +++ b/drivers/macintosh/macio-adb.c @@ -147,7 +147,7 @@ static int macio_adb_reset_bus(void)

/* Hrm... we may want to not lock interrupts for so * long ... oh well, who uses that chip anyway ? :) - * That function will be seldomly used during boot + * That function will be seldom used during boot * on rare machines, so... */ spin_lock_irqsave(&macio_lock, flags); diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 9e3e2c5..0236730 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -662,7 +662,7 @@ static void thermostat_create_files(void) err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed); if (err) printk(KERN_WARNING - "Failed to create tempertaure attribute file(s).\n"); + "Failed to create temperature attribute file(s).\n"); }

static void thermostat_remove_files(void) diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index bca2af2..d25df48 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -91,7 +91,7 @@ * * Mar. 10, 2005 : 1.2 * - Add basic support for Xserve G5 - * - Retreive pumps min/max from EEPROM image in device-tree (broken) + * - Retrieve pumps min/max from EEPROM image in device-tree (broken) * - Use min/max macros here or there * - Latest darwin updated U3H min fan speed to 20% PWM * @@ -375,7 +375,7 @@ static int read_smon_adc(struct cpu_pid_state *state, int chan) rc = i2c_master_send(state->monitor, buf, 2); if (rc <= 0) goto error; - /* Wait for convertion */ + /* Wait for conversion */ msleep(1); /* Switch to data register */ buf[0] = 4; @@ -1192,7 +1192,7 @@ static int init_cpu_state(struct cpu_pid_state *state, int index) err |= device_create_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm); } if (err) - printk(KERN_WARNING "Failed to create some of the atribute" + printk(KERN_WARNING "Failed to create some of the attribute" "files for CPU %d\n", index);

return 0; diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index d37819f..46c4e95 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -45,7 +45,7 @@ #include <asm/sections.h> #include <asm/macio.h>

-#define LOG_TEMP 0 /* continously log temperature */ +#define LOG_TEMP 0 /* continuously log temperature */

static struct { volatile int running; diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h index 931a7a7..d0aeaf4 100644 --- a/drivers/md/bitmap.h +++ b/drivers/md/bitmap.h @@ -45,7 +45,7 @@ * * The counter counts pending write requests, plus the on-disk bit. * When the counter is '1' and the resync bits are clear, the on-disk - * bit can be cleared aswell, thus setting the counter to 0. + * bit can be cleared as well, thus setting the counter to 0. * When we set a bit, or in the counter (to start a write), if the fields is * 0, we first set the disk bit and set the counter to 1. * diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index dad011a..7771ed2 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -419,7 +419,7 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio) /* * Possible cases: * 1) DM_RH_DIRTY - * 2) DM_RH_NOSYNC: was dirty, other preceeding writes failed + * 2) DM_RH_NOSYNC: was dirty, other preceding writes failed * 3) DM_RH_RECOVERING: flushing pending writes * Either case, the region should have not been connected to list. */ diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c index 339fdc6..23078da 100644 --- a/drivers/md/faulty.c +++ b/drivers/md/faulty.c @@ -30,7 +30,7 @@ * * Different modes can be active at a time, but only * one can be set at array creation. Others can be added later. - * A mode can be one-shot or recurrent with the recurrance being + * A mode can be one-shot or recurrent with the recurrence being * once in every N requests. * The bottom 5 bits of the "layout" indicate the mode. The * remainder indicate a period, or 0 for one-shot. diff --git a/drivers/md/md.c b/drivers/md/md.c index 8b66e04..b12b377 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6266,7 +6266,7 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev) * rt is a sector_t, so could be 32bit or 64bit. * So we divide before multiply in case it is 32bit and close * to the limit. - * We scale the divisor (db) by 32 to avoid loosing precision + * We scale the divisor (db) by 32 to avoid losing precision * near the end of resync when the number of remaining sectors * is close to 'db'. * We then divide rt by 32 after multiplying by db to compensate. diff --git a/drivers/md/md.h b/drivers/md/md.h index 12215d4..52b4073 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -94,7 +94,7 @@ struct mdk_rdev_s #define In_sync 2 /* device is in_sync with rest of array */ #define WriteMostly 4 /* Avoid reading if at all possible */ #define AutoDetected 7 /* added by auto-detect */ -#define Blocked 8 /* An error occured on an externally +#define Blocked 8 /* An error occurred on an externally * managed array, don't allow writes * until it is cleared */ wait_queue_head_t blocked_wait; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index f7b6237..2da83d5 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -5,7 +5,7 @@ * * RAID-10 support for md. * - * Base on code in raid1.c. See raid1.c for futher copyright information. + * Base on code in raid1.c. See raid1.c for further copyright information. * * * This program is free software; you can redistribute it and/or modify @@ -340,14 +340,14 @@ static void raid10_end_write_request(struct bio *bio, int error)

/* * RAID10 layout manager - * Aswell as the chunksize and raid_disks count, there are two + * As well as the chunksize and raid_disks count, there are two * parameters: near_copies and far_copies. * near_copies * far_copies must be <= raid_disks. * Normally one of these will be 1. * If both are 1, we get raid0. * If near_copies == raid_disks, we get raid1. * - * Chunks are layed out in raid0 style with near_copies copies of the + * Chunks are laid out in raid0 style with near_copies copies of the * first chunk, followed by near_copies copies of the next chunk and * so on. * If far_copies > 1, then after 1/far_copies of the array has been assigned diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h index 2316ac2..944b110 100644 --- a/drivers/md/raid10.h +++ b/drivers/md/raid10.h @@ -17,8 +17,8 @@ struct r10_private_data_s { spinlock_t device_lock;

/* geometry */ - int near_copies; /* number of copies layed out raid0 style */ - int far_copies; /* number of copies layed out + int near_copies; /* number of copies laid out raid0 style */ + int far_copies; /* number of copies laid out * at large strides across drives */ int far_offset; /* far_copies are offset by 1 stripe diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c index 74ee172..b2ba9dc 100644 --- a/drivers/media/common/saa7146_i2c.c +++ b/drivers/media/common/saa7146_i2c.c @@ -161,7 +161,7 @@ static int saa7146_i2c_reset(struct saa7146_dev *dev) msleep(SAA7146_I2C_DELAY); }

- /* if any error is still present, a fatal error has occured ... */ + /* if any error is still present, a fatal error has occurred ... */ status = saa7146_i2c_status(dev); if ( dev->i2c_bitrate != status ) { DEB_I2C(("fatal error. status:0x%08x\n",status)); @@ -326,9 +326,9 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m if ( 0 != err) { /* this one is unsatisfying: some i2c slaves on some dvb cards don't acknowledge correctly, so the saa7146 - thinks that an address error occured. in that case, the + thinks that an address error occurred. in that case, the transaction should be retrying, even if an address error - occured. analog saa7146 based cards extensively rely on + occurred. analog saa7146 based cards extensively rely on i2c address probing, however, and address errors indicate that a device is really *not* there. retrying in that case increases the time the device needs to probe greatly, so @@ -365,7 +365,7 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m DEB_I2C(("transmission successful. (msg:%d).\n",err)); out: /* another bug in revision 0: the i2c-registers get uploaded randomly by other - uploads, so we better clear them out before continueing */ + uploads, so we better clear them out before continuing */ if( 0 == dev->revision ) { __le32 zero = 0; saa7146_i2c_reset(dev); diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c index 605e28b..0d6e094 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/common/tuners/mxl5005s.c @@ -106,7 +106,7 @@ enum { /* MXL5005 Tuner Register Struct */ struct TunerReg { u16 Reg_Num; /* Tuner Register Address */ - u16 Reg_Val; /* Current sw programmed value waiting to be writen */ + u16 Reg_Val; /* Current sw programmed value waiting to be written */ };

enum { diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h index 3abb221..50cfa8c 100644 --- a/drivers/media/common/tuners/tda18271.h +++ b/drivers/media/common/tuners/tda18271.h @@ -98,7 +98,7 @@ struct tda18271_config { /* output options that can be disabled */ enum tda18271_output_options output_opt;

- /* some i2c providers cant write all 39 registers at once */ + /* some i2c providers can't write all 39 registers at once */ enum tda18271_small_i2c small_i2c;

/* force rf tracking filter calibration on startup */ diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 227c020..9552540 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -58,7 +58,7 @@ struct flexcop_pci {

int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */ u32 last_dma1_cur_pos; - /* position of the pointer last time the timer/packet irq occured */ + /* position of the pointer last time the timer/packet irq occurred */ int count; int count_prev; int stream_problem; diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index 78fc469..1e1106d 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -427,10 +427,10 @@ static void or51211_reset(struct dvb_frontend * fe) struct dvb_bt8xx_card *bt = fe->dvb->priv;

/* RESET DEVICE - * reset is controled by GPIO-0 + * reset is controlled by GPIO-0 * when set to 0 causes reset and when to 1 for normal op * must remain reset for 128 clock cycles on a 50Mhz clock - * also PRM1 PRM2 & PRM4 are controled by GPIO-1,GPIO-2 & GPIO-4 + * also PRM1 PRM2 & PRM4 are controlled by GPIO-1,GPIO-2 & GPIO-4 * We assume that the reset has be held low long enough or we * have been reset by a power on. When the driver is unloaded * reset set to 0 so if reloaded we have been reset. diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index cad6634..31e2c0d 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1638,7 +1638,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file, case FE_READ_STATUS: { fe_status_t* status = parg;

- /* if retune was requested but hasn't occured yet, prevent + /* if retune was requested but hasn't occurred yet, prevent * that user get signal state from previous tuning */ if (fepriv->state == FESTATE_RETUNE || fepriv->state == FESTATE_ERROR) { @@ -1729,7 +1729,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file, * Dish network legacy switches (as used by Dish500) * are controlled by sending 9-bit command words * spaced 8msec apart. - * the actual command word is switch/port dependant + * the actual command word is switch/port dependent * so it is up to the userspace application to send * the right command. * The command must always start with a '0' after diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c index 199ece0..6ad9474 100644 --- a/drivers/media/dvb/dvb-usb/af9005-fe.c +++ b/drivers/media/dvb/dvb-usb/af9005-fe.c @@ -580,7 +580,7 @@ static int af9005_fe_program_cfoe(struct dvb_usb_device *d, fe_bandwidth_t bw) NS_coeff2_8k = 0x724925; break; default: - err("Invalid bandwith %d.", bw); + err("Invalid bandwidth %d.", bw); return -EINVAL; }

@@ -789,7 +789,7 @@ static int af9005_fe_select_bw(struct dvb_usb_device *d, fe_bandwidth_t bw) temp = 2; break; default: - err("Invalid bandwith %d.", bw); + err("Invalid bandwidth %d.", bw); return -EINVAL; } return af9005_write_register_bits(d, xd_g_reg_bw, reg_bw_pos, @@ -930,7 +930,7 @@ static int af9005_fe_init(struct dvb_frontend *fe) if (ret) return ret;

- /* init other parameters: program cfoe and select bandwith */ + /* init other parameters: program cfoe and select bandwidth */ deb_info("program cfoe\n"); if ((ret = af9005_fe_program_cfoe(state->d, BANDWIDTH_6_MHZ))) return ret; @@ -1167,7 +1167,7 @@ static int af9005_fe_set_frontend(struct dvb_frontend *fe, if (ret) return ret;

- /* select bandwith */ + /* select bandwidth */ deb_info("select bandwidth"); ret = af9005_fe_select_bw(state->d, fep->u.ofdm.bandwidth); if (ret) diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h index af8d55e..0f461ca 100644 --- a/drivers/media/dvb/dvb-usb/friio.h +++ b/drivers/media/dvb/dvb-usb/friio.h @@ -20,7 +20,7 @@ * Frontend: comtech JDVBT-90502 * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1)) * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1)) - * LED x3 (+LNB) controll: PIC 16F676 + * LED x3 (+LNB) control: PIC 16F676 * EEPROM: 24C08 * * (USB smart card reader: AU9522) diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c index cd26e7c..f2db012 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.c +++ b/drivers/media/dvb/dvb-usb/lmedm04.c @@ -321,7 +321,7 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap) lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC); - info("INT Interupt Service Started"); + info("INT Interrupt Service Started");

return 0; } @@ -482,7 +482,7 @@ static int lme2510_msg(struct dvb_usb_device *d, break; }

- deb_info(4, "I2C From Interupt Message out(%02x) in(%02x)", + deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)", wbuf[3], rbuf[1]);

} @@ -632,11 +632,11 @@ static int lme2510_int_service(struct dvb_usb_adapter *adap) } d->rc_dev = rc;

- /* Start the Interupt */ + /* Start the Interrupt */ ret = lme2510_int_read(adap); if (ret < 0) { rc_unregister_device(rc); - info("INT Unable to start Interupt Service"); + info("INT Unable to start Interrupt Service"); return -ENODEV; }

@@ -1003,7 +1003,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) return -ENODEV; }

- /* Start the Interupt & Remote*/ + /* Start the Interrupt & Remote*/ ret = lme2510_int_service(adap);

return ret; @@ -1171,7 +1171,7 @@ void *lme2510_exit_int(struct dvb_usb_device *d) usb_kill_urb(st->lme_urb); usb_free_coherent(d->udev, 5000, st->buffer, st->lme_urb->transfer_dma); - info("Interupt Service Stopped"); + info("Interrupt Service Stopped"); rc_unregister_device(d->rc_dev); info("Remote Stopped"); } diff --git a/drivers/media/dvb/frontends/atbm8830.h b/drivers/media/dvb/frontends/atbm8830.h index e8149f3..0242733 100644 --- a/drivers/media/dvb/frontends/atbm8830.h +++ b/drivers/media/dvb/frontends/atbm8830.h @@ -39,7 +39,7 @@ struct atbm8830_config { /* parallel or serial transport stream */ u8 serial_ts;

- /* transport stream clock output only when receving valid stream */ + /* transport stream clock output only when receiving valid stream */ u8 ts_clk_gated;

/* Decoder sample TS data at rising edge of clock */ diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c index 65f6a36..1d57294 100644 --- a/drivers/media/dvb/frontends/au8522_dig.c +++ b/drivers/media/dvb/frontends/au8522_dig.c @@ -635,7 +635,7 @@ static int au8522_led_gpio_enable(struct au8522_state *state, int onoff) struct au8522_led_config *led_config = state->config->led_cfg; u8 val;

- /* bail out if we cant control an LED */ + /* bail out if we can't control an LED */ if (!led_config || !led_config->gpio_output || !led_config->gpio_output_enable || !led_config->gpio_output_disable) return 0; @@ -665,7 +665,7 @@ static int au8522_led_ctrl(struct au8522_state *state, int led) struct au8522_led_config *led_config = state->config->led_cfg; int i, ret = 0;

- /* bail out if we cant control an LED */ + /* bail out if we can't control an LED */ if (!led_config || !led_config->gpio_leds || !led_config->num_led_states || !led_config->led_states) return 0; @@ -803,7 +803,7 @@ static int au8522_led_status(struct au8522_state *state, const u16 *snr) int led; u16 strong;

- /* bail out if we cant control an LED */ + /* bail out if we can't control an LED */ if (!led_config) return 0;

diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c index cf5e576..8aff586 100644 --- a/drivers/media/dvb/frontends/bcm3510.c +++ b/drivers/media/dvb/frontends/bcm3510.c @@ -155,7 +155,7 @@ static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len) unsigned long t;

/* Check if any previous HAB request still needs to be serviced by the - * Aquisition Processor before sending new request */ + * Acquisition Processor before sending new request */ if ((ret = bcm3510_readB(st,0xa8,&v)) < 0) return ret; if (v.HABSTAT_a8.HABR) { @@ -361,7 +361,7 @@ static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a) /* Set duration of the initial state of TUNCTL = 3.34 micro Sec */ c.TUNCTL_state = 0x40;

-/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */ +/* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */ c.ctl_dat[0].ctrl.size = BITS_8; c.ctl_dat[0].data = 0x80 | bc;

@@ -397,7 +397,7 @@ static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a) c.ctl_dat[7].ctrl.cs0 = 1; c.ctl_dat[7].data = 0x40;

-/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */ +/* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */ c.ctl_dat[8].ctrl.size = BITS_8; c.ctl_dat[8].data = 0x80;

diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c index 5fbc0fc..0142214 100644 --- a/drivers/media/dvb/frontends/cx22700.c +++ b/drivers/media/dvb/frontends/cx22700.c @@ -179,7 +179,7 @@ static int cx22700_set_tps (struct cx22700_state *state, struct dvb_ofdm_paramet cx22700_writereg (state, 0x06, val);

cx22700_writereg (state, 0x08, 0x04 | 0x02); /* use user tps parameters */ - cx22700_writereg (state, 0x08, 0x04); /* restart aquisition */ + cx22700_writereg (state, 0x08, 0x04); /* restart acquisition */

return 0; } diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index ff6c498..3139558 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -55,7 +55,7 @@ MODULE_PARM_DESC(debug, "Enable verbose debug messages");

/* Register values to initialise the demod */ static const u8 init_tab[] = { - 0x00, 0x00, /* Stop aquisition */ + 0x00, 0x00, /* Stop acquisition */ 0x0B, 0x06, 0x09, 0x01, 0x0D, 0x41, @@ -310,7 +310,7 @@ static int cx22702_set_tps(struct dvb_frontend *fe, & 0xfc); cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40); - cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */ + cx22702_writereg(state, 0x00, 0x01); /* Begin acquisition */ dprintk("%s: Autodetecting\n", __func__); return 0; } @@ -424,7 +424,7 @@ static int cx22702_set_tps(struct dvb_frontend *fe, cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);

- /* Begin channel aquisition */ + /* Begin channel acquisition */ cx22702_writereg(state, 0x00, 0x01);

return 0; diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index 7a1a5bc..bf9c999 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -544,7 +544,7 @@ static int cx24110_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par cx24110_set_inversion (state, p->inversion); cx24110_set_fec (state, p->u.qpsk.fec_inner); cx24110_set_symbolrate (state, p->u.qpsk.symbol_rate); - cx24110_writereg(state,0x04,0x05); /* start aquisition */ + cx24110_writereg(state,0x04,0x05); /* start acquisition */

return 0; } diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb/frontends/cx24113.h index 5de0f7f..01eb7b9 100644 --- a/drivers/media/dvb/frontends/cx24113.h +++ b/drivers/media/dvb/frontends/cx24113.h @@ -1,5 +1,5 @@ /* - * Driver for Conexant CX24113/CX24128 Tuner (Satelite) + * Driver for Conexant CX24113/CX24128 Tuner (Satellite) * * Copyright (C) 2007-8 Patrick Boettcher pb@linuxtv.org * diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index fad6a99..b1dd8ac 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -949,7 +949,7 @@ static int cx24123_set_frontend(struct dvb_frontend *fe, else err("it seems I don't have a tuner...");

- /* Enable automatic aquisition and reset cycle */ + /* Enable automatic acquisition and reset cycle */ cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07)); cx24123_writereg(state, 0x00, 0x10); cx24123_writereg(state, 0x00, 0); diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index a05007c..536f02b 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -1097,7 +1097,7 @@ static int drx397x_init(struct dvb_frontend *fe) s->config.ifagc.w0A = 0x3ff; s->config.ifagc.w0C = 0x388;

- /* for signal strenght calculations */ + /* for signal strength calculations */ s->config.ss76 = 820; s->config.ss78 = 2200; s->config.ss7A = 150; diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 33b6323..c283112 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -1630,7 +1630,7 @@ static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe, state->srate = p->u.qpsk.symbol_rate / 1000;

if (!mb86a16_set_fe(state)) { - dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK"); + dprintk(verbose, MB86A16_ERROR, 1, "Successfully acquired LOCK"); return DVBFE_ALGO_SEARCH_SUCCESS; }

diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c index cc4acd2..0f867a5 100644 --- a/drivers/media/dvb/frontends/mb86a20s.c +++ b/drivers/media/dvb/frontends/mb86a20s.c @@ -406,7 +406,7 @@ err: printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n"); } else { state->need_init = false; - dprintk("Initialization succeded.\n"); + dprintk("Initialization succeeded.\n"); } return rc; } diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index 472907d..83e6f1a 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -670,7 +670,7 @@ static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) if (ret < 0) goto error;

- /* preserve this bit to not accidently shutdown ADC */ + /* preserve this bit to not accidentally shutdown ADC */ val &= 0x80; break; } diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c index e87b747..17f8cdf 100644 --- a/drivers/media/dvb/frontends/s5h1420.c +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -225,7 +225,7 @@ static int s5h1420_recv_slave_reply (struct dvb_frontend* fe, unsigned long timeout; int result = 0;

- /* setup for DISEQC recieve */ + /* setup for DISEQC receive */ val = s5h1420_readreg(state, 0x3b); s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */ msleep(15); diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c index 64673b8..bc1a8af 100644 --- a/drivers/media/dvb/frontends/stb6100.c +++ b/drivers/media/dvb/frontends/stb6100.c @@ -360,7 +360,7 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency) else odiv = 0;

- /* VCO enabled, seach clock off as per LL3.7, 3.4.1 */ + /* VCO enabled, search clock off as per LL3.7, 3.4.1 */ regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);

/* OSM */ diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c index 4fd7479..84d88f33 100644 --- a/drivers/media/dvb/frontends/stv0297.c +++ b/drivers/media/dvb/frontends/stv0297.c @@ -435,7 +435,7 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par return -EINVAL; }

- // determine inversion dependant parameters + // determine inversion dependent parameters inversion = p->inversion; if (state->config->invert) inversion = (inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON; diff --git a/drivers/media/dvb/frontends/stv0367.c b/drivers/media/dvb/frontends/stv0367.c index 4e0e6a8..e57ab53 100644 --- a/drivers/media/dvb/frontends/stv0367.c +++ b/drivers/media/dvb/frontends/stv0367.c @@ -1328,7 +1328,7 @@ stv0367_ter_signal_type stv0367ter_lock_algo(struct stv0367_state *state)

/*guard=stv0367_readbits(state,F367TER_SYR_GUARD); */

- /*supress EPQ auto for SYR_GARD 1/16 or 1/32 + /*suppress EPQ auto for SYR_GARD 1/16 or 1/32 and set channel predictor in automatic */ #if 0 switch (guard) { diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h index b62b0f0..e0ea74c 100644 --- a/drivers/media/dvb/frontends/stv0900_priv.h +++ b/drivers/media/dvb/frontends/stv0900_priv.h @@ -238,7 +238,7 @@ enum fe_stv0900_demod_mode { };

struct stv0900_init_params{ - u32 dmd_ref_clk;/* Refrence,Input clock for the demod in Hz */ + u32 dmd_ref_clk;/* Reference,Input clock for the demod in Hz */

/* Demodulator Type (single demod or dual demod) */ enum fe_stv0900_demod_mode demod_mode; diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c index 41d0f0a..52d8712 100644 --- a/drivers/media/dvb/frontends/stv090x.c +++ b/drivers/media/dvb/frontends/stv090x.c @@ -1424,7 +1424,7 @@ static int stv090x_start_search(struct stv090x_state *state) if (STV090x_WRITE_DEMOD(state, CFRLOW0, 0x00) < 0) goto err;

- /*enlarge the timing bandwith for Low SR*/ + /*enlarge the timing bandwidth for Low SR*/ if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0) goto err; } else { @@ -1432,17 +1432,17 @@ static int stv090x_start_search(struct stv090x_state *state) Set The carrier search up and low to auto mode */ if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0) goto err; - /*reduce the timing bandwith for high SR*/ + /*reduce the timing bandwidth for high SR*/ if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0) goto err; } } else { /* >= Cut 3 */ if (state->srate <= 5000000) { - /* enlarge the timing bandwith for Low SR */ + /* enlarge the timing bandwidth for Low SR */ STV090x_WRITE_DEMOD(state, RTCS2, 0x68); } else { - /* reduce timing bandwith for high SR */ + /* reduce timing bandwidth for high SR */ STV090x_WRITE_DEMOD(state, RTCS2, 0x44); }

@@ -2482,7 +2482,7 @@ static int stv090x_sw_algo(struct stv090x_state *state) dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD); } if (dvbs2_fly_wheel < 0xd) { - /*FALSE lock, The demod is loosing lock */ + /*FALSE lock, The demod is losing lock */ lock = 0; if (trials < 2) { if (state->internal->dev_ver >= 0x20) { @@ -3202,7 +3202,7 @@ static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state) goto err; if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0) goto err; - if (stv090x_set_srate(state, 1000000) < 0) /* inital srate = 1Msps */ + if (stv090x_set_srate(state, 1000000) < 0) /* initial srate = 1Msps */ goto err; } else { /* known srate */ diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c index 97b889e..f807c8b 100644 --- a/drivers/media/dvb/mantis/mantis_uart.c +++ b/drivers/media/dvb/mantis/mantis_uart.c @@ -172,7 +172,7 @@ int mantis_uart_init(struct mantis_pci *mantis) mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);

schedule_work(&mantis->uart_work); - dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized"); + dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");

return 0; } diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c index 175a0f6..ccc2d1a 100644 --- a/drivers/media/dvb/ngene/ngene-core.c +++ b/drivers/media/dvb/ngene/ngene-core.c @@ -122,7 +122,7 @@ static void demux_tasklet(unsigned long data) Cur->ngeneBuffer.SR.Flags &= ~0x40; break; - /* Stop proccessing stream */ + /* Stop processing stream */ } } else { /* We got a valid buffer, @@ -133,7 +133,7 @@ static void demux_tasklet(unsigned long data) printk(KERN_ERR DEVICE_NAME ": OOPS\n"); if (chan->HWState == HWSTATE_RUN) { Cur->ngeneBuffer.SR.Flags &= ~0x40; - break; /* Stop proccessing stream */ + break; /* Stop processing stream */ } } if (chan->AudioDTOUpdated) { diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c index 6ca6713..7cb79ec 100644 --- a/drivers/media/dvb/pluto2/pluto2.c +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -294,13 +294,13 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)

/* Workaround for broken hardware: * [1] On startup NBPACKETS seems to contain an uninitialized value, - * but no packets have been transfered. + * but no packets have been transferred. * [2] Sometimes (actually very often) NBPACKETS stays at zero - * although one packet has been transfered. + * although one packet has been transferred. * [3] Sometimes (actually rarely), the card gets into an erroneous * mode where it continuously generates interrupts, claiming it - * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet - * has been transfered. Only a reset seems to solve this + * has received nbpackets>TS_DMA_PACKETS packets, but no packet + * has been transferred. Only a reset seems to solve this */ if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { unsigned int i = 0; @@ -332,7 +332,7 @@ static irqreturn_t pluto_irq(int irq, void *dev_id) struct pluto *pluto = dev_id; u32 tscr;

- /* check whether an interrupt occured on this device */ + /* check whether an interrupt occurred on this device */ tscr = pluto_readreg(pluto, REG_TSCR); if (!(tscr & (TSCR_DE | TSCR_OVR))) return IRQ_NONE; diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c index b80d09b..37c594f 100644 --- a/drivers/media/dvb/siano/smsdvb.c +++ b/drivers/media/dvb/siano/smsdvb.c @@ -650,7 +650,7 @@ static int smsdvb_dvbt_set_frontend(struct dvb_frontend *fe, if (status & FE_HAS_LOCK) return ret;

- /* previous tune didnt lock - enable LNA and tune again */ + /* previous tune didn't lock - enable LNA and tune again */ sms_board_lna_control(client->coredev, 1); }

diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index fc0a60f..3d20719 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -2332,7 +2332,7 @@ static int frontend_init(struct av7110 *av7110) * increment. That's how the 7146 is programmed to do event * counting in this budget-patch.c * I *think* HPS setting has something to do with the phase - * of HS but I cant be 100% sure in that. + * of HS but I can't be 100% sure in that. * * hardware debug note: a working budget card (including budget patch) * with vpeirq() interrupt setup in mode "0x90" (every 64K) will diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 5798355..3395d1a 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -539,7 +539,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** increment. That's how the 7146 is programmed to do event ** counting in this budget-patch.c ** I *think* HPS setting has something to do with the phase -** of HS but I cant be 100% sure in that. +** of HS but I can't be 100% sure in that.

** hardware debug note: a working budget card (including budget patch) ** with vpeirq() interrupt setup in mode "0x90" (every 64K) will diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index fe1b803..f893bff 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -234,7 +234,7 @@ static void ttusb_dec_handle_irq( struct urb *urb) * (with buffer[3] == 0x40) in an intervall of ~100ms. * But to handle this correctly we had to imlemenent some * kind of timer which signals a 'key up' event if no - * keyrepeat signal is recieved for lets say 200ms. + * keyrepeat signal is received for lets say 200ms. * this should/could be added later ... * for now lets report each signal as a key down and up*/ dprintk("%s:rc signal:%d\n", __func__, buffer[4]); diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index e6b2d08..b3a635b 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -99,7 +99,7 @@ devices, that would be 76 and 91. */

/* * Commands that device should understand - * List isnt full and will be updated with implementation of new functions + * List isn't full and will be updated with implementation of new functions */ #define AMRADIO_SET_FREQ 0xa4 #define AMRADIO_SET_MUTE 0xab diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c index 0fab6f8..deca2e0 100644 --- a/drivers/media/radio/si4713-i2c.c +++ b/drivers/media/radio/si4713-i2c.c @@ -481,7 +481,7 @@ unlock: }

/* - * si4713_wait_stc - Waits STC interrupt and clears status bits. Usefull + * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful * for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS * @sdev: si4713_device structure for the device we are communicating * @usecs: timeout to wait for STC interrupt signal diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c index 64454d3..26fb9cb 100644 --- a/drivers/media/radio/wl128x/fmdrv_common.c +++ b/drivers/media/radio/wl128x/fmdrv_common.c @@ -352,7 +352,7 @@ static void send_tasklet(unsigned long arg) if (!atomic_read(&fmdev->tx_cnt)) return;

- /* Check, is there any timeout happenned to last transmitted packet */ + /* Check, is there any timeout happened to last transmitted packet */ if ((jiffies - fmdev->last_tx_jiffies) > FM_DRV_TX_TIMEOUT) { fmerr("TX timeout occurred\n"); atomic_set(&fmdev->tx_cnt, 1); @@ -478,7 +478,7 @@ u32 fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload, return -ETIMEDOUT; } if (!fmdev->resp_skb) { - fmerr("Reponse SKB is missing\n"); + fmerr("Response SKB is missing\n"); return -EFAULT; } spin_lock_irqsave(&fmdev->resp_skb_lock, flags); @@ -1592,7 +1592,7 @@ u32 fmc_release(struct fmdev *fmdev) fmdbg("FM Core is already down\n"); return 0; } - /* Sevice pending read */ + /* Service pending read */ wake_up_interruptible(&fmdev->rx.rds.read_queue);

tasklet_kill(&fmdev->tx_task); diff --git a/drivers/media/radio/wl128x/fmdrv_common.h b/drivers/media/radio/wl128x/fmdrv_common.h index 427c416..aee243b 100644 --- a/drivers/media/radio/wl128x/fmdrv_common.h +++ b/drivers/media/radio/wl128x/fmdrv_common.h @@ -362,7 +362,7 @@ struct fm_event_msg_hdr { #define FM_TX_PREEMPH_50US 0 #define FM_TX_PREEMPH_75US 2

-/* FM TX antenna impedence values */ +/* FM TX antenna impedance values */ #define FM_TX_ANT_IMP_50 0 #define FM_TX_ANT_IMP_200 1 #define FM_TX_ANT_IMP_500 2 diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index 1ac4913..a43ed6c 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -520,7 +520,7 @@ static void ene_rx_disable(struct ene_device *dev) dev->rx_enabled = false; }

-/* This resets the receiver. Usefull to stop stream of spaces at end of +/* This resets the receiver. Useful to stop stream of spaces at end of * transmission */ static void ene_rx_reset(struct ene_device *dev) @@ -1089,7 +1089,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) if (error < 0) goto error;

- ene_notice("driver has been succesfully loaded"); + ene_notice("driver has been successfully loaded"); return 0; error: if (dev && dev->irq >= 0) diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index f714e1a..ebd68ed 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1293,7 +1293,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf) * contain a position coordinate (x,y), with each component ranging * from -14 to 14. We want to down-sample this to only 4 discrete values * for up/down/left/right arrow keys. Also, when you get too close to - * diagonals, it has a tendancy to jump back and forth, so lets try to + * diagonals, it has a tendency to jump back and forth, so lets try to * ignore when they get too close. */ if (ictx->product != 0xffdc) { diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 01f258a..11c19d8 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -153,7 +153,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_edge); * @type: the type of the event that has occurred * * This routine (which may be called from an interrupt context) works - * in similiar manner to ir_raw_event_store_edge. + * in similar manner to ir_raw_event_store_edge. * This routine is intended for devices with limited internal buffer * It automerges samples of same type, and handles timeouts */ diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c index 3c19139..afae14f 100644 --- a/drivers/media/rc/keymaps/rc-lme2510.c +++ b/drivers/media/rc/keymaps/rc-lme2510.c @@ -55,7 +55,7 @@ static struct rc_map_table lme2510_rc[] = { { 0xff40fb04, KEY_MEDIA_REPEAT}, /* Recall */ { 0xff40e51a, KEY_PAUSE }, /* Timeshift */ { 0xff40fd02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ - { 0xff40f906, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/ + { 0xff40f906, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ { 0xff40fe01, KEY_CHANNELUP }, { 0xff40fa05, KEY_CHANNELDOWN }, { 0xff40eb14, KEY_ZOOM }, @@ -76,7 +76,7 @@ static struct rc_map_table lme2510_rc[] = { { 0xff00bb44, KEY_MEDIA_REPEAT}, /* Recall */ { 0xff00b54a, KEY_PAUSE }, /* Timeshift */ { 0xff00b847, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ - { 0xff00bc43, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/ + { 0xff00bc43, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ { 0xff00b946, KEY_CHANNELUP }, { 0xff00bf40, KEY_CHANNELDOWN }, { 0xff00f708, KEY_ZOOM }, diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c index 18b37fa..fdd213f 100644 --- a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c +++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c @@ -29,7 +29,7 @@ static struct rc_map_table msi_tvanywhere[] = {

{ 0x0c, KEY_MUTE }, { 0x0f, KEY_SCREEN }, /* Full Screen */ - { 0x10, KEY_FN }, /* Funtion */ + { 0x10, KEY_FN }, /* Function */ { 0x11, KEY_TIME }, /* Time shift */ { 0x12, KEY_POWER }, { 0x13, KEY_MEDIA }, /* MTS */ diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c index f1c1281..f9f2fa2 100644 --- a/drivers/media/rc/keymaps/rc-norwood.c +++ b/drivers/media/rc/keymaps/rc-norwood.c @@ -49,7 +49,7 @@ static struct rc_map_table norwood[] = { { 0x37, KEY_PLAY }, /* Play */ { 0x36, KEY_PAUSE }, /* Pause */ { 0x2b, KEY_STOP }, /* Stop */ - { 0x67, KEY_FASTFORWARD }, /* Foward */ + { 0x67, KEY_FASTFORWARD }, /* Forward */ { 0x66, KEY_REWIND }, /* Rewind */ { 0x3e, KEY_SEARCH }, /* Auto Scan */ { 0x2e, KEY_CAMERA }, /* Capture Video */ diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 5ac1baf..f53f9c68d 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -255,7 +255,7 @@ static unsigned int ir_update_mapping(struct rc_dev *dev, * @rc_map: scancode table to be searched * @scancode: the desired scancode * @resize: controls whether we allowed to resize the table to - * accomodate not yet present scancodes + * accommodate not yet present scancodes * @return: index of the mapping containing scancode in question * or -1U in case of failure. * @@ -1037,7 +1037,7 @@ int rc_register_device(struct rc_dev *dev) goto out_table;

/* - * Default delay of 250ms is too short for some protocols, expecially + * Default delay of 250ms is too short for some protocols, especially * since the timeout is currently set to 250ms. Increase it to 500ms, * to avoid wrong repetition of the keycodes. Note that this must be * set after the call to input_register_device(). diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c index 6ad83a1..c03eb29 100644 --- a/drivers/media/video/au0828/au0828-video.c +++ b/drivers/media/video/au0828/au0828-video.c @@ -502,7 +502,7 @@ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q,

/* Get the next buffer */ *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); - /* Cleans up buffer - Usefull for testing for frame/URB loss */ + /* Cleans up buffer - Useful for testing for frame/URB loss */ outp = videobuf_to_vmalloc(&(*buf)->vb); memset(outp, 0x00, (*buf)->vb.size);

diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 242f0d5..3c9e6c7 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -2244,8 +2244,8 @@ struct tvcard bttv_tvcards[] = { }, [BTTV_BOARD_PICOLO_TETRA_CHIP] = { /*Eric DEBIEF debief@telemsa.com*/ - /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/ - /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ + /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ + /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ /*0x79 in bttv.h*/ .name = "Euresys Picolo Tetra", .video_inputs = 4, @@ -4567,7 +4567,7 @@ static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) * at one input while the monitor is looking at another. * * Since I've couldn't be bothered figuring out how to add an - * independant muxsel for the monitor bus, I've just set it to + * independent muxsel for the monitor bus, I've just set it to * whatever the card is looking at. * * OUT0 of the TDA8540's is connected to MUX0 (0x03) diff --git a/drivers/media/video/bt8xx/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c index fd604d3..13ce72c 100644 --- a/drivers/media/video/bt8xx/bttv-gpio.c +++ b/drivers/media/video/bt8xx/bttv-gpio.c @@ -3,7 +3,7 @@ bttv-gpio.c -- gpio sub drivers

sysfs-based sub driver interface for bttv - mainly intented for gpio access + mainly intended for gpio access

Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 55ffd60..6647033 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -383,7 +383,7 @@ static int cafe_smbus_write_data(struct cafe_camera *cam, * causes the device to die. * Use a busy-wait because we often send a large quantity of small * commands at-once; using msleep() would cause a lot of context - * switches which take longer than 2ms, resulting in a noticable + * switches which take longer than 2ms, resulting in a noticeable * boot-time and capture-start delays. */ mdelay(2); diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 188c9c3..e9c69d9 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -109,7 +109,7 @@ struct cx18_av_state { int is_initialized;

/* - * The VBI slicer starts operating and counting lines, begining at + * The VBI slicer starts operating and counting lines, beginning at * slicer line count of 1, at D lines after the deassertion of VRESET. * This staring field line, S, is 6 (& 319) or 10 (& 273) for 625 or 525 * line systems respectively. Sliced ancillary data captured on VBI diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 86c30b99..4f041c0 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -312,7 +312,7 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh,

/* * Set the digitizer registers for raw active VBI. - * Note cx18_av_vbi_wipes out alot of the passed in fmt under valid + * Note cx18_av_vbi_wipes out a lot of the passed in fmt under valid * calling conditions */ ret = v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &fmt->fmt.vbi); diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c index 5822275..6d3121f 100644 --- a/drivers/media/video/cx18/cx18-vbi.c +++ b/drivers/media/video/cx18/cx18-vbi.c @@ -29,7 +29,7 @@ /* * Raster Reference/Protection (RP) bytes, used in Start/End Active * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start - * of VBI sample or VBI ancilliary data regions in the digitial ratser line. + * of VBI sample or VBI ancillary data regions in the digitial ratser line. * * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0 */ diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index 62843d3..280df43 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -2577,7 +2577,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) break;

case 6: /* ts1 parallel mode */ - cx231xx_info("%s: set ts1 parrallel mode registers\n", + cx231xx_info("%s: set ts1 parallel mode registers\n", __func__); status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100); status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400); diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.c b/drivers/media/video/cx231xx/cx231xx-vbi.c index 1d91448..1c7a4da 100644 --- a/drivers/media/video/cx231xx/cx231xx-vbi.c +++ b/drivers/media/video/cx231xx/cx231xx-vbi.c @@ -631,7 +631,7 @@ static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q, /* Get the next buffer */ *buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);

- /* Cleans up buffer - Usefull for testing for frame/URB loss */ + /* Cleans up buffer - Useful for testing for frame/URB loss */ outp = videobuf_to_vmalloc(&(*buf)->vb); memset(outp, 0, (*buf)->vb.size);

diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c index ffd5af9..a69c24d 100644 --- a/drivers/media/video/cx231xx/cx231xx-video.c +++ b/drivers/media/video/cx231xx/cx231xx-video.c @@ -309,7 +309,7 @@ static inline void get_next_buf(struct cx231xx_dmaqueue *dma_q, /* Get the next buffer */ *buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);

- /* Cleans up buffer - Usefull for testing for frame/URB loss */ + /* Cleans up buffer - Useful for testing for frame/URB loss */ outp = videobuf_to_vmalloc(&(*buf)->vb); memset(outp, 0, (*buf)->vb.size);

diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c index 209b971..c9f15d6 100644 --- a/drivers/media/video/cx23885/cimax2.c +++ b/drivers/media/video/cx23885/cimax2.c @@ -449,7 +449,7 @@ int netup_ci_init(struct cx23885_tsport *port) 0x04, /* ack active low */ 0x00, /* LOCK = 0 */ 0x33, /* serial mode, rising in, rising out, MSB first*/ - 0x31, /* syncronization */ + 0x31, /* synchronization */ }; int ret;

diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 8db2797..c186473 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -214,7 +214,7 @@ struct cx23885_board {

/* Vendors can and do run the PCIe bridge at different * clock rates, driven physically by crystals on the PCBs. - * The core has to accomodate this. This allows the user + * The core has to accommodate this. This allows the user * to add new boards with new frequencys. The value is * expressed in Hz. * diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 35796e0..b7ee2ae 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -2,7 +2,7 @@ * * Copyright (C) 2004 Ulf Eklund * - * Based on the saa7115 driver and on the first verison of Chris Kennedy's + * Based on the saa7115 driver and on the first version of Chris Kennedy's * cx25840 driver. * * Changes by Tyler Trafford tatrafford@comcast.net @@ -445,7 +445,7 @@ static void cx25840_initialize(struct i2c_client *client) cx25840_write(client, 0x918, 0xa0); cx25840_write(client, 0x919, 0x01);

- /* stereo prefered */ + /* stereo preferred */ cx25840_write(client, 0x809, 0x04); /* AC97 shift */ cx25840_write(client, 0x8cf, 0x0f); @@ -546,7 +546,7 @@ static void cx23885_initialize(struct i2c_client *client) * Aux PLL * Initial setup for audio sample clock: * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz - * Intial I2S output/master clock(?): + * Initial I2S output/master clock(?): * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz */ switch (state->id) { @@ -903,7 +903,7 @@ static void input_change(struct i2c_client *client) } else if (std & V4L2_STD_PAL) { /* Autodetect audio standard and audio system */ cx25840_write(client, 0x808, 0xff); - /* Since system PAL-L is pretty much non-existant and + /* Since system PAL-L is pretty much non-existent and not used by any public broadcast network, force 6.5 MHz carrier to be interpreted as System DK, this avoids DK audio detection instability */ @@ -1851,7 +1851,7 @@ static u32 get_cx2388x_ident(struct i2c_client *client) ret = V4L2_IDENT_CX23885_AV; } else { /* CX23887 has a broken DIF, but the registers - * appear valid (but unsed), good enough to detect. */ + * appear valid (but unused), good enough to detect. */ ret = V4L2_IDENT_CX23887_AV; } } else if (cx25840_read4(client, 0x300) & 0x0fffffff) { diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c index 490aafb..c8b32c1 100644 --- a/drivers/media/video/davinci/dm644x_ccdc.c +++ b/drivers/media/video/davinci/dm644x_ccdc.c @@ -258,7 +258,7 @@ static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params) /* * Allocate memory for FPC table if current * FPC table buffer is not big enough to - * accomodate FPC Number requested + * accommodate FPC Number requested */ if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) { if (fpc_physaddr != NULL) { @@ -436,7 +436,7 @@ void ccdc_config_ycbcr(void)

/* * configure the horizontal line offset. This should be a - * on 32 byte bondary. So clear LSB 5 bits + * on 32 byte boundary. So clear LSB 5 bits */ regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF);

diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c index 71e961e..5b38fc9 100644 --- a/drivers/media/video/davinci/vpfe_capture.c +++ b/drivers/media/video/davinci/vpfe_capture.c @@ -1691,7 +1691,7 @@ static int vpfe_s_crop(struct file *file, void *priv, goto unlock_out; }

- /* adjust the width to 16 pixel boundry */ + /* adjust the width to 16 pixel boundary */ crop->c.width = ((crop->c.width + 15) & ~0xf);

/* make sure parameters are valid */ diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index a83131b..7b6461d 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -377,7 +377,7 @@ static inline void get_next_buf(struct em28xx_dmaqueue *dma_q, /* Get the next buffer */ *buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue);

- /* Cleans up buffer - Usefull for testing for frame/URB loss */ + /* Cleans up buffer - Useful for testing for frame/URB loss */ outp = videobuf_to_vmalloc(&(*buf)->vb); memset(outp, 0, (*buf)->vb.size);

@@ -404,7 +404,7 @@ static inline void vbi_get_next_buf(struct em28xx_dmaqueue *dma_q,

/* Get the next buffer */ *buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue); - /* Cleans up buffer - Usefull for testing for frame/URB loss */ + /* Cleans up buffer - Useful for testing for frame/URB loss */ outp = videobuf_to_vmalloc(&(*buf)->vb); memset(outp, 0x00, (*buf)->vb.size);

diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c index c276a7d..b57160e 100644 --- a/drivers/media/video/gspca/gl860/gl860-mi1320.c +++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c @@ -201,7 +201,7 @@ void mi1320_init_settings(struct gspca_dev *gspca_dev) sd->vmax.backlight = 2; sd->vmax.brightness = 8; sd->vmax.sharpness = 7; - sd->vmax.contrast = 0; /* 10 but not working with tihs driver */ + sd->vmax.contrast = 0; /* 10 but not working with this driver */ sd->vmax.gamma = 40; sd->vmax.hue = 5 + 1; sd->vmax.saturation = 8; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 9c6a643..e526aa3 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -857,7 +857,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) }

/* the bandwidth is not wide enough - * negociate or try a lower alternate setting */ + * negotiate or try a lower alternate setting */ PDEBUG(D_ERR|D_STREAM, "bandwidth not wide enough - trying again"); msleep(20); /* wait for kill complete */ @@ -2346,7 +2346,7 @@ void gspca_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL);

/* release the device */ - /* (this will call gspca_release() immediatly or on last close) */ + /* (this will call gspca_release() immediately or on last close) */ video_unregister_device(&gspca_dev->vdev);

/* PDEBUG(D_PROBE, "disconnect complete"); */ diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index cb4d0bf..0196209 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -361,7 +361,7 @@ static int sd_start(struct gspca_dev *gspca_dev) mi_w(gspca_dev, i + 1, mi_data[i]);

data[0] = 0x00; - data[1] = 0x4d; /* ISOC transfering enable... */ + data[1] = 0x4d; /* ISOC transferring enable... */ reg_w(gspca_dev, 2);

gspca_dev->ctrl_inac = 0; /* activate the illuminator controls */ diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c index 3884c9d..97e5079 100644 --- a/drivers/media/video/gspca/mr97310a.c +++ b/drivers/media/video/gspca/mr97310a.c @@ -469,7 +469,7 @@ static void lcd_stop(struct gspca_dev *gspca_dev) static int isoc_enable(struct gspca_dev *gspca_dev) { gspca_dev->usb_buf[0] = 0x00; - gspca_dev->usb_buf[1] = 0x4d; /* ISOC transfering enable... */ + gspca_dev->usb_buf[1] = 0x4d; /* ISOC transferring enable... */ return mr_write(gspca_dev, 2); }

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index fd1b608..36a46fc 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -381,7 +381,7 @@ static const struct v4l2_pix_format ov519_sif_mode[] = { larger then necessary, however they need to be this big as the ov511 / ov518 always fills the entire isoc frame, using 0 padding bytes when it doesn't have any data. So with low framerates the amount of data - transfered can become quite large (libv4l will remove all the 0 padding + transferred can become quite large (libv4l will remove all the 0 padding in userspace). */ static const struct v4l2_pix_format ov518_vga_mode[] = { {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, @@ -4368,7 +4368,7 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev, gspca_dev->last_packet_type = DISCARD_PACKET; return; } - /* Add 11 byte footer to frame, might be usefull */ + /* Add 11 byte footer to frame, might be useful */ gspca_frame_add(gspca_dev, LAST_PACKET, in, 11); return; } else { diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 5a08738..146b459 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -827,7 +827,7 @@ static void setexposure(struct gspca_dev *gspca_dev) possible to use less exposure then what the fps maximum allows by setting register 10. register 10 configures the actual exposure as quotient of the full exposure, with 0 - being no exposure at all (not very usefull) and reg10_max + being no exposure at all (not very useful) and reg10_max being max exposure possible at that framerate.

The code maps our 0 - 510 ms exposure ctrl to these 2 diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 45552c3..3e76951 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -607,7 +607,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x00, 0x8880, 2); /* family cam Quicksmart stuff */ reg_w(gspca_dev, 0x00, 0x800a, 0x00); - /* Set agc transfer: synced inbetween frames */ + /* Set agc transfer: synced between frames */ reg_w(gspca_dev, 0x00, 0x820f, 0x01); /* Init SDRAM - needed for SDRAM access */ reg_w(gspca_dev, 0x00, 0x870a, 0x04); @@ -831,7 +831,7 @@ static int sd_start(struct gspca_dev *gspca_dev)

/* familycam Quicksmart pocketDV stuff */ reg_w(gspca_dev, 0x00, 0x800a, 0x00); - /* Set agc transfer: synced inbetween frames */ + /* Set agc transfer: synced between frames */ reg_w(gspca_dev, 0x00, 0x820f, 0x01); /* Init SDRAM - needed for SDRAM access */ reg_w(gspca_dev, 0x00, 0x870a, 0x04); diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 3483193..41dce49 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -592,7 +592,7 @@ static const u16 spca508_sightcam_init_data[][2] = { /* This line seems to setup the frame/canvas */ {0x000f, 0x8402},

-/* Theese 6 lines are needed to startup the webcam */ +/* These 6 lines are needed to startup the webcam */ {0x0090, 0x8110}, {0x0001, 0x8114}, {0x0001, 0x8114}, diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c index 2e9c061..5ba96af 100644 --- a/drivers/media/video/gspca/sq905.c +++ b/drivers/media/video/gspca/sq905.c @@ -22,7 +22,7 @@ * History and Acknowledgments * * The original Linux driver for SQ905 based cameras was written by - * Marcell Lengyel and furter developed by many other contributers + * Marcell Lengyel and furter developed by many other contributors * and is available from http://sourceforge.net/projects/sqcam/ * * This driver takes advantage of the reverse engineering work done for diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c index 17531b4..b815685 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -569,7 +569,7 @@ static int hdcs_init(struct sd *sd) if (err < 0) return err;

- /* Enable continous frame capture, bit 2: stop when frame complete */ + /* Enable continuous frame capture, bit 2: stop when frame complete */ err = stv06xx_write_sensor(sd, HDCS_REG_CONFIG(sd), BIT(3)); if (err < 0) return err; diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c index cdf8b19..cbc505a 100644 --- a/drivers/media/video/hexium_gemini.c +++ b/drivers/media/video/hexium_gemini.c @@ -261,7 +261,7 @@ static int vidioc_s_input(struct file *file, void *fh, unsigned int input)

/* the saa7146 provides some controls (brightness, contrast, saturation) which gets registered *after* this function. because of this we have - to return with a value != 0 even if the function succeded.. */ + to return with a value != 0 even if the function succeeded.. */ static int vidioc_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qc) { struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c index 4df0194..14a1cea 100644 --- a/drivers/media/video/ivtv/ivtv-firmware.c +++ b/drivers/media/video/ivtv/ivtv-firmware.c @@ -179,7 +179,7 @@ static volatile struct ivtv_mailbox __iomem *ivtv_search_mailbox(const volatile { int i;

- /* mailbox is preceeded by a 16 byte 'magic cookie' starting at a 256-byte + /* mailbox is preceded by a 16 byte 'magic cookie' starting at a 256-byte address boundary */ for (i = 0; i < size; i += 0x100) { if (readl(mem + i) == 0x12345678 && @@ -377,7 +377,7 @@ int ivtv_firmware_check(struct ivtv *itv, char *where) "Reloading\n", where); res = ivtv_firmware_restart(itv); /* - * Even if restarted ok, still signal a problem had occured. + * Even if restarted ok, still signal a problem had occurred. * The caller can come through this function again to check * if things are really ok after the restart. */ diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index f0316d0..1724745 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -1080,7 +1080,7 @@ static int ivtvfb_init_vidmode(struct ivtv *itv) kmalloc(sizeof(u32) * 16, GFP_KERNEL|__GFP_NOWARN);

if (!oi->ivtvfb_info.pseudo_palette) { - IVTVFB_ERR("abort, unable to alloc pseudo pallete\n"); + IVTVFB_ERR("abort, unable to alloc pseudo palette\n"); return -ENOMEM; }

diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index b1763ac..8126622 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -69,7 +69,7 @@ MODULE_LICENSE("GPL"); /* module parameters */ static int opmode = OPMODE_AUTO; int msp_debug; /* msp_debug output */ -int msp_once; /* no continous stereo monitoring */ +int msp_once; /* no continuous stereo monitoring */ int msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), the autoscan seems work well only with FM... */ int msp_standard = 1; /* Override auto detect of audio msp_standard, @@ -551,7 +551,7 @@ static int msp_log_status(struct v4l2_subdev *sd) switch (state->mode) { case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break; case MSP_MODE_FM_RADIO: p = "FM Radio"; break; - case MSP_MODE_FM_TERRA: p = "Terrestial FM-mono/stereo"; break; + case MSP_MODE_FM_TERRA: p = "Terrestrial FM-mono/stereo"; break; case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break; case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break; case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break; diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index b376fcd..80387e2 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -87,7 +87,7 @@ static struct msp3400c_init_data_dem { {-8, -8, 4, 6, 78, 107}, MSP_CARRIER(10.7), MSP_CARRIER(10.7), 0x00d0, 0x0480, 0x0020, 0x3000 - }, { /* Terrestial FM-mono + FM-stereo */ + }, { /* Terrestrial FM-mono + FM-stereo */ {3, 18, 27, 48, 66, 72}, {3, 18, 27, 48, 66, 72}, MSP_CARRIER(5.5), MSP_CARRIER(5.5), diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 029a4ba..d4fe7bc 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -473,7 +473,7 @@ static int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout, /* * Convert V4L2 rotation to DSS rotation * V4L2 understand 0, 90, 180, 270. - * Convert to 0, 1, 2 and 3 repsectively for DSS + * Convert to 0, 1, 2 and 3 respectively for DSS */ static int v4l2_rot_to_dss_rot(int v4l2_rotation, enum dss_rotation *rotation, bool mirror) @@ -1142,7 +1142,7 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q, }

/* - * Buffer queue funtion will be called from the videobuf layer when _QBUF + * Buffer queue function will be called from the videobuf layer when _QBUF * ioctl is called. It is used to enqueue buffer, which is ready to be * displayed. */ diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c index b941c76..2aa6a76 100644 --- a/drivers/media/video/omap/omap_voutlib.c +++ b/drivers/media/video/omap/omap_voutlib.c @@ -53,7 +53,7 @@ EXPORT_SYMBOL_GPL(omap_vout_default_crop); /* Given a new render window in new_win, adjust the window to the * nearest supported configuration. The adjusted window parameters are * returned in new_win. - * Returns zero if succesful, or -EINVAL if the requested window is + * Returns zero if successful, or -EINVAL if the requested window is * impossible and cannot reasonably be adjusted. */ int omap_vout_try_window(struct v4l2_framebuffer *fbuf, @@ -101,7 +101,7 @@ EXPORT_SYMBOL_GPL(omap_vout_try_window); * will also be adjusted if necessary. Preference is given to keeping the * the window as close to the requested configuration as possible. If * successful, new_win, vout->win, and crop are updated. - * Returns zero if succesful, or -EINVAL if the requested preview window is + * Returns zero if successful, or -EINVAL if the requested preview window is * impossible and cannot reasonably be adjusted. */ int omap_vout_new_window(struct v4l2_rect *crop, @@ -155,7 +155,7 @@ EXPORT_SYMBOL_GPL(omap_vout_new_window); * window would fall outside the display boundaries, the cropping rectangle * will also be adjusted to maintain the rescaling ratios. If successful, crop * and win are updated. - * Returns zero if succesful, or -EINVAL if the requested cropping rectangle is + * Returns zero if successful, or -EINVAL if the requested cropping rectangle is * impossible and cannot reasonably be adjusted. */ int omap_vout_new_crop(struct v4l2_pix_format *pix, diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index eab31cb..5954b93 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -687,7 +687,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev, * In CONTIG mode, the current buffer parameters had already * been entered into the DMA programming register set while the * buffer was fetched with prepare_next_vb(), they may have also - * been transfered into the runtime set and already active if + * been transferred into the runtime set and already active if * the DMA still running. */ } else { @@ -835,7 +835,7 @@ static irqreturn_t cam_isr(int irq, void *data) /* * If exactly 2 sgbufs from the next sglist have * been programmed into the DMA engine (the - * frist one already transfered into the DMA + * first one already transferred into the DMA * runtime register set, the second one still * in the programming set), then we are in sync. */ diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index 1a9963bd..503bd79 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -715,7 +715,7 @@ static int isp_pipeline_link_notify(struct media_pad *source, * Walk the entities chain starting at the pipeline output video node and start * all modules in the chain in the given mode. * - * Return 0 if successfull, or the return value of the failed video::s_stream + * Return 0 if successful, or the return value of the failed video::s_stream * operation otherwise. */ static int isp_pipeline_enable(struct isp_pipeline *pipe, @@ -883,7 +883,7 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe) * Set the pipeline to the given stream state. Pipelines can be started in * single-shot or continuous mode. * - * Return 0 if successfull, or the return value of the failed video::s_stream + * Return 0 if successful, or the return value of the failed video::s_stream * operation otherwise. */ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, @@ -1283,7 +1283,7 @@ static void __isp_subclk_update(struct isp_device *isp) clk |= ISPCTRL_RSZ_CLK_EN;

/* NOTE: For CCDC & Preview submodules, we need to affect internal - * RAM aswell. + * RAM as well. */ if (isp->subclk_resources & OMAP3_ISP_SUBCLK_CCDC) clk |= ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN; @@ -1431,7 +1431,7 @@ static int isp_get_clocks(struct isp_device *isp) * Increment the reference count on the ISP. If the first reference is taken, * enable clocks and power-up all submodules. * - * Return a pointer to the ISP device structure, or NULL if an error occured. + * Return a pointer to the ISP device structure, or NULL if an error occurred. */ struct isp_device *omap3isp_get(struct isp_device *isp) { diff --git a/drivers/media/video/omap3isp/ispccdc.h b/drivers/media/video/omap3isp/ispccdc.h index d403af5..483a19c 100644 --- a/drivers/media/video/omap3isp/ispccdc.h +++ b/drivers/media/video/omap3isp/ispccdc.h @@ -150,7 +150,7 @@ struct ispccdc_lsc { * @input: Active input * @output: Active outputs * @video_out: Output video node - * @error: A hardware error occured during capture + * @error: A hardware error occurred during capture * @alaw: A-law compression enabled (1) or disabled (0) * @lpf: Low pass filter enabled (1) or disabled (0) * @obclamp: Optical-black clamp enabled (1) or disabled (0) @@ -163,7 +163,7 @@ struct ispccdc_lsc { * @shadow_update: Controls update in progress by userspace * @syncif: Interface synchronization configuration * @vpcfg: Video port configuration - * @underrun: A buffer underrun occured and a new buffer has been queued + * @underrun: A buffer underrun occurred and a new buffer has been queued * @state: Streaming state * @lock: Serializes shadow_update with interrupt handler * @wait: Wait queue used to stop the module diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c index 0efef2e..0e16cab 100644 --- a/drivers/media/video/omap3isp/ispccp2.c +++ b/drivers/media/video/omap3isp/ispccp2.c @@ -772,7 +772,7 @@ static int ccp2_enum_frame_size(struct v4l2_subdev *sd, * @sd : pointer to v4l2 subdev structure * @fh : V4L2 subdev file handle * @fmt : pointer to v4l2 subdev format structure - * return -EINVAL or zero on sucess + * return -EINVAL or zero on success */ static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *fmt) diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c index fb503f3..69161a6 100644 --- a/drivers/media/video/omap3isp/ispcsi2.c +++ b/drivers/media/video/omap3isp/ispcsi2.c @@ -969,7 +969,7 @@ static int csi2_enum_frame_size(struct v4l2_subdev *sd, * @sd : pointer to v4l2 subdev structure * @fh : V4L2 subdev file handle * @fmt: pointer to v4l2 subdev format structure - * return -EINVAL or zero on sucess + * return -EINVAL or zero on success */ static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *fmt) diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c index baf9374..2b16988 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/video/omap3isp/isppreview.c @@ -34,7 +34,7 @@ #include "ispreg.h" #include "isppreview.h"

-/* Default values in Office Flourescent Light for RGBtoRGB Blending */ +/* Default values in Office Fluorescent Light for RGBtoRGB Blending */ static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = { { /* RGB-RGB Matrix */ {0x01E2, 0x0F30, 0x0FEE}, @@ -44,7 +44,7 @@ static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = { {0x0000, 0x0000, 0x0000} };

-/* Default values in Office Flourescent Light for RGB to YUV Conversion*/ +/* Default values in Office Fluorescent Light for RGB to YUV Conversion*/ static struct omap3isp_prev_csc flr_prev_csc = { { /* CSC Coef Matrix */ {66, 129, 25}, @@ -54,22 +54,22 @@ static struct omap3isp_prev_csc flr_prev_csc = { {0x0, 0x0, 0x0} };

-/* Default values in Office Flourescent Light for CFA Gradient*/ +/* Default values in Office Fluorescent Light for CFA Gradient*/ #define FLR_CFA_GRADTHRS_HORZ 0x28 #define FLR_CFA_GRADTHRS_VERT 0x28

-/* Default values in Office Flourescent Light for Chroma Suppression*/ +/* Default values in Office Fluorescent Light for Chroma Suppression*/ #define FLR_CSUP_GAIN 0x0D #define FLR_CSUP_THRES 0xEB

-/* Default values in Office Flourescent Light for Noise Filter*/ +/* Default values in Office Fluorescent Light for Noise Filter*/ #define FLR_NF_STRGTH 0x03

/* Default values for White Balance */ #define FLR_WBAL_DGAIN 0x100 #define FLR_WBAL_COEF 0x20

-/* Default values in Office Flourescent Light for Black Adjustment*/ +/* Default values in Office Fluorescent Light for Black Adjustment*/ #define FLR_BLKADJ_BLUE 0x0 #define FLR_BLKADJ_GREEN 0x0 #define FLR_BLKADJ_RED 0x0 @@ -137,7 +137,7 @@ preview_enable_invalaw(struct isp_prev_device *prev, u8 enable) * @enable: 1 - Enable, 0 - Disable * * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also - * The proccess is applied for each captured frame. + * The process is applied for each captured frame. */ static void preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable) @@ -157,7 +157,7 @@ preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable) * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is * subtracted with the pixels in the current frame. * - * The proccess is applied for each captured frame. + * The process is applied for each captured frame. */ static void preview_enable_drkframe(struct isp_prev_device *prev, u8 enable) @@ -1528,7 +1528,7 @@ static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) * preview_set_stream - Enable/Disable streaming on preview subdev * @sd : pointer to v4l2 subdev structure * @enable: 1 == Enable, 0 == Disable - * return -EINVAL or zero on sucess + * return -EINVAL or zero on success */ static int preview_set_stream(struct v4l2_subdev *sd, int enable) { @@ -1780,7 +1780,7 @@ static int preview_enum_frame_size(struct v4l2_subdev *sd, * @sd : pointer to v4l2 subdev structure * @fh : V4L2 subdev file handle * @fmt: pointer to v4l2 subdev format structure - * return -EINVAL or zero on sucess + * return -EINVAL or zero on success */ static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *fmt) diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h index f2d63ca..fa943bd 100644 --- a/drivers/media/video/omap3isp/isppreview.h +++ b/drivers/media/video/omap3isp/isppreview.h @@ -163,7 +163,7 @@ struct isptables_update { * @output: Bitmask of the active output * @video_in: Input video entity * @video_out: Output video entity - * @error: A hardware error occured during capture + * @error: A hardware error occurred during capture * @params: Module configuration data * @shadow_update: If set, update the hardware configured in the next interrupt * @underrun: Whether the preview entity has queued buffers on the output diff --git a/drivers/media/video/omap3isp/ispqueue.h b/drivers/media/video/omap3isp/ispqueue.h index 251de3e..92c5a12 100644 --- a/drivers/media/video/omap3isp/ispqueue.h +++ b/drivers/media/video/omap3isp/ispqueue.h @@ -46,9 +46,9 @@ struct scatterlist; * device yet. * @ISP_BUF_STATE_ACTIVE: The buffer is in use for an active video transfer. * @ISP_BUF_STATE_ERROR: The device is done with the buffer and an error - * occured. For capture device the buffer likely contains corrupted data or + * occurred. For capture device the buffer likely contains corrupted data or * no data at all. - * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occured. + * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occurred. * For capture devices the buffer contains valid data. */ enum isp_video_buffer_state { diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c index 75d39b1..653f88b 100644 --- a/drivers/media/video/omap3isp/ispresizer.c +++ b/drivers/media/video/omap3isp/ispresizer.c @@ -751,7 +751,7 @@ static void resizer_print_status(struct isp_res_device *res) * ratio will thus result in a resizing factor slightly larger than the * requested value. * - * To accomodate that, and make sure the TRM equations are satisfied exactly, we + * To accommodate that, and make sure the TRM equations are satisfied exactly, we * compute the input crop rectangle as the last step. * * As if the situation wasn't complex enough, the maximum output width depends @@ -1386,7 +1386,7 @@ static int resizer_enum_frame_size(struct v4l2_subdev *sd, * @sd : pointer to v4l2 subdev structure * @fh : V4L2 subdev file handle * @fmt : pointer to v4l2 subdev format structure - * return -EINVAL or zero on sucess + * return -EINVAL or zero on success */ static int resizer_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *fmt) diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c index a0bb5db..208a7ec 100644 --- a/drivers/media/video/omap3isp/ispvideo.c +++ b/drivers/media/video/omap3isp/ispvideo.c @@ -494,12 +494,12 @@ static const struct isp_video_queue_operations isp_video_queue_ops = { /* * omap3isp_video_buffer_next - Complete the current buffer and return the next * @video: ISP video object - * @error: Whether an error occured during capture + * @error: Whether an error occurred during capture * * Remove the current video buffer from the DMA queue and fill its timestamp, * field count and state fields before waking up its completion handler. * - * The buffer state is set to VIDEOBUF_DONE if no error occured (@error is 0) + * The buffer state is set to VIDEOBUF_DONE if no error occurred (@error is 0) * or VIDEOBUF_ERROR otherwise (@error is non-zero). * * The DMA queue is expected to contain at least one buffer. @@ -578,7 +578,7 @@ struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video, /* * omap3isp_video_resume - Perform resume operation on the buffers * @video: ISP video object - * @continuous: Pipeline is in single shot mode if 0 or continous mode otherwise + * @continuous: Pipeline is in single shot mode if 0 or continuous mode otherwise * * This function is intended to be used on suspend/resume scenario. It * requests video queue layer to discard buffers marked as DONE if it's in diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index fe8e3eb..456d9ad 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -1038,7 +1038,7 @@ static int ov6650_reset(struct i2c_client *client) ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0); if (ret) dev_err(&client->dev, - "An error occured while entering soft reset!\n"); + "An error occurred while entering soft reset!\n");

return ret; } diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c index 53d88a2..5173ac4 100644 --- a/drivers/media/video/ov9640.c +++ b/drivers/media/video/ov9640.c @@ -273,7 +273,7 @@ static int ov9640_reset(struct i2c_client *client) ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET); if (ret) dev_err(&client->dev, - "An error occured while entering soft reset!\n"); + "An error occurred while entering soft reset!\n");

return ret; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c index aeed1c2..9515f3a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c +++ b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c @@ -32,7 +32,7 @@

Read and analyze data in the eeprom. Use tveeprom to figure out the packet structure, since this is another Hauppauge device and - internally it has a family resemblence to ivtv-type devices + internally it has a family resemblance to ivtv-type devices

*/

diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index 51d3009..d7753ae 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -75,7 +75,7 @@ enum pvr2_v4l_type { * (but it might still on the bus). In this state there's nothing we can * do; it must be replugged in order to recover. * - * COLD - Device is in an unusuable state, needs microcontroller firmware. + * COLD - Device is in an unusable state, needs microcontroller firmware. * * WARM - We can communicate with the device and the proper * microcontroller firmware is running, but other device initialization is diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 0268677..c1ee09a 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -714,7 +714,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev, * * The DMA chaining is done with DMA running. This means a tiny temporal window * remains, where a buffer is queued on the chain, while the chain is already - * stopped. This means the tailed buffer would never be transfered by DMA. + * stopped. This means the tailed buffer would never be transferred by DMA. * This function restarts the capture for this corner case, where : * - DADR() == DADDR_STOP * - a videobuffer is queued on the pcdev->capture list diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c index 4d929a3..4893b2d 100644 --- a/drivers/media/video/s5p-fimc/fimc-reg.c +++ b/drivers/media/video/s5p-fimc/fimc-reg.c @@ -356,7 +356,7 @@ void fimc_hw_en_capture(struct fimc_ctx *ctx) /* one shot mode */ cfg |= S5P_CIIMGCPT_CPT_FREN_ENABLE | S5P_CIIMGCPT_IMGCPTEN; } else { - /* Continous frame capture mode (freerun). */ + /* Continuous frame capture mode (freerun). */ cfg &= ~(S5P_CIIMGCPT_CPT_FREN_ENABLE | S5P_CIIMGCPT_CPT_FRMOD_CNT); cfg |= S5P_CIIMGCPT_IMGCPTEN; diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 61c6007..50f1be0 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -7460,7 +7460,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) dev->tuner_type = TUNER_PHILIPS_FM1216ME_MK3; break; default: - printk(KERN_ERR "%s Cant determine tuner type %x from EEPROM\n", dev->name, tuner_t); + printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t); } } else if ((data[1] != 0) && (data[1] != 0xff)) { /* new config structure */ @@ -7480,7 +7480,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) printk(KERN_INFO "%s Board has DVB-T\n", dev->name); break; default: - printk(KERN_ERR "%s Cant determine tuner type %x from EEPROM\n", dev->name, tuner_t); + printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t); } } else { printk(KERN_ERR "%s unexpected config structure\n", dev->name); diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c index 6a4c217..62fac7f 100644 --- a/drivers/media/video/saa7164/saa7164-cmd.c +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -257,7 +257,7 @@ out: }

/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if - * the event never occured, or SAA_OK if it was signaled during the wait. + * the event never occurred, or SAA_OK if it was signaled during the wait. */ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno) { diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c index b369300..a266bf0 100644 --- a/drivers/media/video/saa7164/saa7164-fw.c +++ b/drivers/media/video/saa7164/saa7164-fw.c @@ -444,7 +444,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev) printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved); printk(KERN_INFO " .Version = 0x%x\n", hdr->version);

- /* Retreive bootloader if reqd */ + /* Retrieve bootloader if reqd */ if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) /* Second bootloader in the firmware file */ filesize = hdr->reserved * 16; diff --git a/drivers/media/video/saa7164/saa7164-types.h b/drivers/media/video/saa7164/saa7164-types.h index df1d299..1d2140a 100644 --- a/drivers/media/video/saa7164/saa7164-types.h +++ b/drivers/media/video/saa7164/saa7164-types.h @@ -412,7 +412,7 @@ struct tmComResVBIFormatDescrHeader { u8 StartLine; /* NTSC Start = 10 */ u8 EndLine; /* NTSC = 21 */ u8 FieldRate; /* 60 for NTSC */ - u8 bNumLines; /* Unsed - scheduled for removal */ + u8 bNumLines; /* Unused - scheduled for removal */ } __attribute__((packed));

struct tmComResProbeCommit { diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index ce56a1c..0e07c49 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -1810,7 +1810,7 @@ static int sn9c102_open(struct file *filp) /* We will not release the "open_mutex" lock, so that only one process can be in the wait queue below. This way the process - will be sleeping while holding the lock, without loosing its + will be sleeping while holding the lock, without losing its priority after any wake_up(). */ err = wait_event_interruptible_exclusive(cam->wait_open, diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h index 7f38549..3679970 100644 --- a/drivers/media/video/sn9c102/sn9c102_sensor.h +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -180,7 +180,7 @@ struct sn9c102_sensor { It should be used to initialize the sensor only, but may also configure part of the SN9C1XX chip if necessary. You don't need to setup picture settings like brightness, contrast, etc.. here, if - the corrisponding controls are implemented (see below), since + the corresponding controls are implemented (see below), since they are adjusted in the core driver by calling the set_ctrl() method after init(), where the arguments are the default values specified in the v4l2_queryctrl list of supported controls; diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c index 54681a5..b6ee1bd 100644 --- a/drivers/media/video/tcm825x.c +++ b/drivers/media/video/tcm825x.c @@ -493,7 +493,7 @@ static int ioctl_g_ctrl(struct v4l2_int_device *s, int val, r; struct vcontrol *lvc;

- /* exposure time is special, spread accross 2 registers */ + /* exposure time is special, spread across 2 registers */ if (vc->id == V4L2_CID_EXPOSURE) { int val_lower, val_upper;

@@ -538,7 +538,7 @@ static int ioctl_s_ctrl(struct v4l2_int_device *s, struct vcontrol *lvc; int val = vc->value;

- /* exposure time is special, spread accross 2 registers */ + /* exposure time is special, spread across 2 registers */ if (vc->id == V4L2_CID_EXPOSURE) { int val_lower, val_upper; val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L); diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index a25e2b5..c46a3bb 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1058,11 +1058,11 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) #define TDA9875_MVR 0x1b /* Main volume droite */ #define TDA9875_MBA 0x1d /* Main Basse */ #define TDA9875_MTR 0x1e /* Main treble */ -#define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/ -#define TDA9875_AVL 0x20 /* Auxilary volume gauche */ -#define TDA9875_AVR 0x21 /* Auxilary volume droite */ -#define TDA9875_ABA 0x22 /* Auxilary Basse */ -#define TDA9875_ATR 0x23 /* Auxilary treble */ +#define TDA9875_ACS 0x1f /* Auxiliary channel select (FM) 0b0000000*/ +#define TDA9875_AVL 0x20 /* Auxiliary volume gauche */ +#define TDA9875_AVR 0x21 /* Auxiliary volume droite */ +#define TDA9875_ABA 0x22 /* Auxiliary Basse */ +#define TDA9875_ATR 0x23 /* Auxiliary treble */

#define TDA9875_MSR 0x02 /* Monitor select register */ #define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */ diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 545c029..fc766b9 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -394,11 +394,11 @@ int uvc_commit_video(struct uvc_streaming *stream, * * uvc_video_decode_end is called with header data at the end of a bulk or * isochronous payload. It performs any additional header data processing and - * returns 0 or a negative error code if an error occured. As header data have + * returns 0 or a negative error code if an error occurred. As header data have * already been processed by uvc_video_decode_start, this functions isn't * required to perform sanity checks a second time. * - * For isochronous transfers where a payload is always transfered in a single + * For isochronous transfers where a payload is always transferred in a single * URB, the three functions will be called in a row. * * To let the decoder process header data and update its internal state even @@ -658,7 +658,7 @@ static void uvc_video_decode_bulk(struct urb *urb, struct uvc_streaming *stream, buf); } while (ret == -EAGAIN);

- /* If an error occured skip the rest of the payload. */ + /* If an error occurred skip the rest of the payload. */ if (ret < 0 || buf == NULL) { stream->bulk.skip_payload = 1; } else { @@ -821,7 +821,7 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream, return stream->urb_size / psize;

/* Compute the number of packets. Bulk endpoints might transfer UVC - * payloads accross multiple URBs. + * payloads across multiple URBs. */ npackets = DIV_ROUND_UP(size, psize); if (npackets > UVC_MAX_PACKETS) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index a01ed39..506edcc 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -48,7 +48,7 @@ printk(KERN_CONT "%s: " fmt, vfd->name, ## arg);\ } while (0)

-/* Zero out the end of the struct pointed to by p. Everthing after, but +/* Zero out the end of the struct pointed to by p. Everything after, but * not including, the specified field is cleared. */ #define CLEAR_AFTER_FIELD(p, field) \ memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \ diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 75301d1..ca372eb 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -354,7 +354,7 @@ static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std)

/* Here we back up the input selection because it gets overwritten when we fill the registers with the - choosen video norm */ + chosen video norm */ temp_input = vpx3220_fp_read(sd, 0xf2);

v4l2_dbg(1, debug, sd, "s_std %llx\n", (unsigned long long)std); diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/video/zoran/videocodec.h index b654bff..def5558 100644 --- a/drivers/media/video/zoran/videocodec.h +++ b/drivers/media/video/zoran/videocodec.h @@ -57,7 +57,7 @@ therfor they may not be initialized.

The other functions are just for convenience, as they are for sure used by - most/all of the codecs. The last ones may be ommited, too. + most/all of the codecs. The last ones may be omitted, too.

See the structure declaration below for more information and which data has to be set up for the master and the slave. diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 4bb368e..f3f6400 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -259,7 +259,7 @@ struct card_info { struct vfe_polarity vfe_pol; u8 gpio_pol[ZR_GPIO_MAX];

- /* is the /GWS line conected? */ + /* is the /GWS line connected? */ u8 gws_not_connected;

/* avs6eyes mux setting */ diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 7c3921d..2771d81 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1254,7 +1254,7 @@ static int setup_overlay(struct zoran_fh *fh, int on) { struct zoran *zr = fh->zr;

- /* If there is nothing to do, return immediatly */ + /* If there is nothing to do, return immediately */ if ((on && fh->overlay_active != ZORAN_FREE) || (!on && fh->overlay_active == ZORAN_FREE)) return 0; diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 57b42bf..4a1909a 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -973,7 +973,7 @@ try_again: }

/* Memory allocated for attributes by this function should be freed by - * mspro_block_data_clear, no matter if the initialization process succeded + * mspro_block_data_clear, no matter if the initialization process succeeded * or failed. */ static int mspro_block_read_attributes(struct memstick_dev *card) diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c index 700d420..668f5c6 100644 --- a/drivers/memstick/host/r592.c +++ b/drivers/memstick/host/r592.c @@ -796,7 +796,7 @@ static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (memstick_add_host(host)) goto error7;

- message("driver succesfully loaded"); + message("driver successfully loaded"); return 0; error7: free_irq(dev->irq, dev); diff --git a/drivers/memstick/host/r592.h b/drivers/memstick/host/r592.h index eee264e..c5726c1 100644 --- a/drivers/memstick/host/r592.h +++ b/drivers/memstick/host/r592.h @@ -43,12 +43,12 @@

/* Error detection via CRC */ #define R592_STATUS_SEND_ERR (1 << 24) /* Send failed */ -#define R592_STATUS_RECV_ERR (1 << 25) /* Recieve failed */ +#define R592_STATUS_RECV_ERR (1 << 25) /* Receive failed */

/* Card state */ -#define R592_STATUS_RDY (1 << 28) /* RDY signal recieved */ +#define R592_STATUS_RDY (1 << 28) /* RDY signal received */ #define R592_STATUS_CED (1 << 29) /* INT: Command done (serial mode)*/ -#define R592_STATUS_SFIFO_INPUT (1 << 30) /* Small fifo recieved data*/ +#define R592_STATUS_SFIFO_INPUT (1 << 30) /* Small fifo received data*/

#define R592_SFIFO_SIZE 32 /* total size of small fifo is 32 bytes */ #define R592_SFIFO_PACKET 8 /* packet size of small fifo */ diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h index face6e7..03be8b2 100644 --- a/drivers/message/fusion/lsi/mpi_log_fc.h +++ b/drivers/message/fusion/lsi/mpi_log_fc.h @@ -38,8 +38,8 @@ typedef enum _MpiIocLogInfoFc { MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primitive */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primitive */ MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h index 8b04810..f62960b 100644 --- a/drivers/message/fusion/lsi/mpi_log_sas.h +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -56,9 +56,9 @@ #define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE (0x0003E000) /* Tried to upload from flash, but there is none */ #define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE (0x0003E001) /* ImageType field contents were invalid */ #define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */ -#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */ -#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occured while attempting to upload single flash region */ -#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occured while DMAing FW to host memory */ +#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */ +#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occurred while attempting to upload single flash region */ +#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occurred while DMAing FW to host memory */

#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */

@@ -187,8 +187,8 @@ #define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)

#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occurred on SMP Read */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occurred on SMP Write */ #define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */ #define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */ #define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */ @@ -207,8 +207,8 @@ #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */ #define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */ #define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */ -#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */ -#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */ +#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transferring data */ +#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transferring sense data */ #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */ #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */ #define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */ diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index ec8080c..fa15e85 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -3435,7 +3435,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) * If memory has already been allocated, the same (cached) value * is returned. * - * Return 0 if successfull, or non-zero for failure + * Return 0 if successful, or non-zero for failure **/ int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) @@ -6932,7 +6932,7 @@ EXPORT_SYMBOL(mpt_halt_firmware); * Message Unit Reset - instructs the IOC to reset the Reply Post and * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. * All posted buffers are freed, and event notification is turned off. - * IOC doesnt reply to any outstanding request. This will transfer IOC + * IOC doesn't reply to any outstanding request. This will transfer IOC * to READY state. **/ int @@ -7905,7 +7905,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) "Owner", /* 15h */ "Open Transmit DMA Abort", /* 16h */ "IO Device Missing Delay Retry", /* 17h */ - "IO Cancelled Due to Recieve Error", /* 18h */ + "IO Cancelled Due to Receive Error", /* 18h */ NULL, /* 19h */ NULL, /* 1Ah */ NULL, /* 1Bh */ diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index 878bda0..6e6e16a 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -985,7 +985,7 @@ retry_wait: ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply; iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK; if (iocstat == MPI_IOCSTATUS_SUCCESS) { - printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name); + printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name); return 0; } else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) { printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n", @@ -2407,7 +2407,7 @@ done_free_mem: }

/* mf is null if command issued successfully - * otherwise, failure occured after mf acquired. + * otherwise, failure occurred after mf acquired. */ if (mf) mpt_free_msg_frame(ioc, mf); diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index f5a14af..66f9412 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -307,7 +307,7 @@ mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event, spin_unlock_irqrestore(&ioc->fw_event_lock, flags); }

-/* free memory assoicated to a sas firmware event */ +/* free memory associated to a sas firmware event */ static void mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event) { @@ -1094,7 +1094,7 @@ mptsas_block_io_starget(struct scsi_target *starget) /** * mptsas_target_reset_queue * - * Receive request for TARGET_RESET after recieving an firmware + * Receive request for TARGET_RESET after receiving an firmware * event NOT_RESPONDING_EVENT, then put command in link list * and queue if task_queue already in use. * @@ -1403,7 +1403,7 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure, /** * mptsas_add_end_device - report a new end device to sas transport layer * @ioc: Pointer to MPT_ADAPTER structure - * @phy_info: decribes attached device + * @phy_info: describes attached device * * return (0) success (1) failure * @@ -1481,7 +1481,7 @@ mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info) /** * mptsas_del_end_device - report a deleted end device to sas transport layer * @ioc: Pointer to MPT_ADAPTER structure - * @phy_info: decribes attached device + * @phy_info: describes attached device * **/ static void diff --git a/drivers/message/i2o/README b/drivers/message/i2o/README index 911fc30..f072a8e 100644 --- a/drivers/message/i2o/README +++ b/drivers/message/i2o/README @@ -53,7 +53,7 @@ Symbios Logic (Now LSI) BoxHill Corporation Loan of initial FibreChannel disk array used for development work.

-European Comission +European Commission Funding the work done by the University of Helsinki

SysKonnect diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c index 0ee4264..4547db9 100644 --- a/drivers/message/i2o/device.c +++ b/drivers/message/i2o/device.c @@ -65,7 +65,7 @@ int i2o_device_claim(struct i2o_device *dev)

rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_CLAIM, I2O_CLAIM_PRIMARY); if (!rc) - pr_debug("i2o: claim of device %d succeded\n", + pr_debug("i2o: claim of device %d succeeded\n", dev->lct_data.tid); else pr_debug("i2o: claim of device %d failed %d\n", @@ -110,7 +110,7 @@ int i2o_device_claim_release(struct i2o_device *dev) }

if (!rc) - pr_debug("i2o: claim release of device %d succeded\n", + pr_debug("i2o: claim release of device %d succeeded\n", dev->lct_data.tid); else pr_debug("i2o: claim release of device %d failed %d\n", @@ -248,7 +248,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry) goto unreg_dev; }

- /* create user entries refering to this device */ + /* create user entries referring to this device */ list_for_each_entry(tmp, &c->devices, list) if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid) && (tmp != i2o_dev)) { @@ -267,7 +267,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry) goto rmlink1; }

- /* create parent entries refering to this device */ + /* create parent entries referring to this device */ list_for_each_entry(tmp, &c->devices, list) if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) && (tmp != i2o_dev)) { diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 47ec5bc..643ad52 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -610,7 +610,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)

/* * This is to deail with the case of an application - * opening a device and then the device dissapears while + * opening a device and then the device disappears while * it's in use, and then the application tries to release * it. ex: Unmounting a deleted RAID volume at reboot. * If we send messages, it will just cause FAILs since @@ -717,7 +717,7 @@ static unsigned int i2o_block_check_events(struct gendisk *disk,

/** * i2o_block_transfer - Transfer a request to/from the I2O controller - * @req: the request which should be transfered + * @req: the request which should be transferred * * This function converts the request into a I2O message. The necessary * DMA buffers are allocated and after everything is setup post the message diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h index 67f921b..cf8873c 100644 --- a/drivers/message/i2o/i2o_block.h +++ b/drivers/message/i2o/i2o_block.h @@ -73,7 +73,7 @@ struct i2o_block_device { struct i2o_device *i2o_dev; /* pointer to I2O device */ struct gendisk *gd; spinlock_t lock; /* queue lock */ - struct list_head open_queue; /* list of transfered, but unfinished + struct list_head open_queue; /* list of transferred, but unfinished requests */ unsigned int open_queue_depth; /* number of requests in the queue */

diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index 97bdf82..f003957 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -204,7 +204,7 @@ static int i2o_scsi_remove(struct device *dev) * i2o_scsi_probe - verify if dev is a I2O SCSI device and install it * @dev: device to verify if it is a I2O SCSI device * - * Retrieve channel, id and lun for I2O device. If everthing goes well + * Retrieve channel, id and lun for I2O device. If everything goes well * register the I2O device as SCSI device on the I2O SCSI controller. * * Returns 0 on success or negative error code on failure. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e2fea58..3ed3ff0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -201,7 +201,7 @@ config TWL4030_POWER as clock request handshaking.

This driver uses board-specific data to initialize the resources - and load scripts controling which resources are switched off/on + and load scripts controlling which resources are switched off/on or reset when a sleep, wakeup or warm reset event occurs.

config TWL4030_CODEC diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index bc93b2e..6421ad1 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -314,7 +314,7 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input) /* wait for completion of conversion */ if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) { dev_err(gpadc->dev, - "timeout: didnt recieve GPADC conversion interrupt\n"); + "timeout: didn't receive GPADC conversion interrupt\n"); ret = -EINVAL; goto out; } diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index f2f4029..43a76c4 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -185,7 +185,7 @@ static void pcap_isr_work(struct work_struct *work) ezx_pcap_read(pcap, PCAP_REG_MSR, &msr); ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);

- /* We cant service/ack irqs that are assigned to port 2 */ + /* We can't service/ack irqs that are assigned to port 2 */ if (!(pdata->config & PCAP_SECOND_PORT)) { ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel); isr &= ~int_sel; @@ -457,7 +457,7 @@ static int __devinit ezx_pcap_probe(struct spi_device *spi) pcap->workqueue = create_singlethread_workqueue("pcapd"); if (!pcap->workqueue) { ret = -ENOMEM; - dev_err(&spi->dev, "cant create pcap thread\n"); + dev_err(&spi->dev, "can't create pcap thread\n"); goto free_pcap; }

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index cb01209..53450f4 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -332,7 +332,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) int i;

if (!pdata) { - dev_err(dev, "Missing platfrom data\n"); + dev_err(dev, "Missing platform data\n"); ret = -ENOMEM; goto end_probe; } diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index c7687f6..57868416 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -51,7 +51,7 @@ static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)

}

-/* Read a block of upto 32 regs */ +/* Read a block of up to 32 regs */ int pcf50633_read_block(struct pcf50633 *pcf, u8 reg, int nr_regs, u8 *data) { @@ -65,7 +65,7 @@ int pcf50633_read_block(struct pcf50633 *pcf, u8 reg, } EXPORT_SYMBOL_GPL(pcf50633_read_block);

-/* Write a block of upto 32 regs */ +/* Write a block of up to 32 regs */ int pcf50633_write_block(struct pcf50633 *pcf , u8 reg, int nr_regs, u8 *data) { diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index fa93705..dfbae34 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -229,7 +229,7 @@ int twl6030_mmc_card_detect_config(void) twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, REG_INT_MSK_STS_B); /* - * Intially Configuring MMC_CTRL for receving interrupts & + * Initially Configuring MMC_CTRL for receiving interrupts & * Card status on TWL6030 for MMC1 */ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL); @@ -275,7 +275,7 @@ int twl6030_mmc_card_detect(struct device *dev, int slot) /* TWL6030 provide's Card detect support for * only MMC1 controller. */ - pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__); + pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__); return ret; } /* diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c index d73f84b..daf6952 100644 --- a/drivers/mfd/ucb1400_core.c +++ b/drivers/mfd/ucb1400_core.c @@ -8,7 +8,7 @@ * Copyright: MontaVista Software, Inc. * * Spliting done by: Marek Vasut marek.vasut@gmail.com - * If something doesnt work and it worked before spliting, e-mail me, + * If something doesn't work and it worked before spliting, e-mail me, * dont bother Nicolas please ;-) * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c index ecd276a..5f898cb 100644 --- a/drivers/misc/bmp085.c +++ b/drivers/misc/bmp085.c @@ -2,7 +2,7 @@

This driver supports the bmp085 digital barometric pressure and temperature sensor from Bosch Sensortec. The datasheet - is avaliable from their website: + is available from their website: http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-...

A pressure measurement is issued by reading from pressure0_input. @@ -429,7 +429,7 @@ static int __devinit bmp085_probe(struct i2c_client *client, if (err) goto exit_free;

- dev_info(&data->client->dev, "Succesfully initialized bmp085!\n"); + dev_info(&data->client->dev, "Successfully initialized bmp085!\n"); goto exit;

exit_free: diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c index 338dcc1..778fc3f 100644 --- a/drivers/misc/c2port/c2port-duramar2150.c +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -41,7 +41,7 @@ static void duramar2150_c2port_access(struct c2port_device *dev, int status) outb(v | (C2D | C2CK), DIR_PORT); else /* When access is "off" is important that both lines are set - * as inputs or hi-impedence */ + * as inputs or hi-impedance */ outb(v & ~(C2D | C2CK), DIR_PORT);

mutex_unlock(&update_lock); diff --git a/drivers/misc/ibmasm/remote.h b/drivers/misc/ibmasm/remote.h index 72acf5a..00dbf1d 100644 --- a/drivers/misc/ibmasm/remote.h +++ b/drivers/misc/ibmasm/remote.h @@ -20,7 +20,7 @@ * * Author: Max Asb�ck amax@us.ibm.com * - * Orignally written by Pete Reynolds + * Originally written by Pete Reynolds */

#ifndef _IBMASM_REMOTE_H_ diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c index 727af07..b1f4563 100644 --- a/drivers/misc/iwmc3200top/main.c +++ b/drivers/misc/iwmc3200top/main.c @@ -268,7 +268,7 @@ static void iwmct_irq_read_worker(struct work_struct *ws) LOG_INFO(priv, IRQ, "ACK barker arrived " "- starting FW download\n"); } else { /* REBOOT barker */ - LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker); + LOG_INFO(priv, IRQ, "Received reboot barker: %x\n", barker); priv->barker = barker;

if (barker & BARKER_DNLOAD_SYNC_MSK) { diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index 27dc463..74f16f1 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -645,7 +645,7 @@ static int validate_simple_test(char *put_str)

while (*chk_str != '\0' && *put_str != '\0') { /* If someone does a * to match the rest of the string, allow - * it, or stop if the recieved string is complete. + * it, or stop if the received string is complete. */ if (*put_str == '#' || *chk_str == '*') return 0; diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c index 34749ee..9e9bdda 100644 --- a/drivers/misc/sgi-gru/grukservices.c +++ b/drivers/misc/sgi-gru/grukservices.c @@ -229,7 +229,7 @@ again: bid = blade_id < 0 ? uv_numa_blade_id() : blade_id; bs = gru_base[bid];

- /* Handle the case where migration occured while waiting for the sema */ + /* Handle the case where migration occurred while waiting for the sema */ down_read(&bs->bs_kgts_sema); if (blade_id < 0 && bid != uv_numa_blade_id()) { up_read(&bs->bs_kgts_sema); diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h index 7a8b906..5c3ce24 100644 --- a/drivers/misc/sgi-gru/grutables.h +++ b/drivers/misc/sgi-gru/grutables.h @@ -379,7 +379,7 @@ struct gru_thread_state { required for contest */ char ts_cch_req_slice;/* CCH packet slice */ char ts_blade; /* If >= 0, migrate context if - ref from diferent blade */ + ref from different blade */ char ts_force_cch_reload; char ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each allocated CB */ diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 9ee4c78..b4488c8 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -649,7 +649,7 @@ static int kim_probe(struct platform_device *pdev) /* multiple devices could exist */ st_kim_devices[pdev->id] = pdev; } else { - /* platform's sure about existance of 1 device */ + /* platform's sure about existence of 1 device */ st_kim_devices[0] = pdev; }

diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index f5cedec..abc1a63 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -292,7 +292,7 @@ static void mmc_test_free_mem(struct mmc_test_mem *mem) }

/* - * Allocate a lot of memory, preferrably max_sz but at least min_sz. In case + * Allocate a lot of memory, preferably max_sz but at least min_sz. In case * there isn't much memory do not exceed 1/16th total lowmem pages. Also do * not exceed a maximum number of segments and try not to make segments much * bigger than maximum segment size. diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 14e95f3..772d0d0 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -538,7 +538,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,

/* * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF - * bit. This bit will be lost everytime after a reset or power off. + * bit. This bit will be lost every time after a reset or power off. */ if (card->ext_csd.enhanced_area_en) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 60842f8..f3b22bf 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -105,7 +105,7 @@ int mmc_go_idle(struct mmc_host *host) * that in case of hardware that won't pull up DAT3/nCS otherwise. * * SPI hosts ignore ios.chip_select; it's managed according to - * rules that must accomodate non-MMC slaves which this layer + * rules that must accommodate non-MMC slaves which this layer * won't even know about. */ if (!mmc_host_is_spi(host)) { diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index bb192f9..b300161 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -45,7 +45,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card) struct sdio_func *func = card->sdio_func[i - 1]; if (!func) { printk(KERN_WARNING "%s: pending IRQ for " - "non-existant function\n", + "non-existent function\n", mmc_card_id(card)); ret = -EINVAL; } else if (func->irq_handler) { diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 80bc9a5..ea3888b 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -127,7 +127,7 @@ struct atmel_mci_dma { * EVENT_DATA_COMPLETE is set in @pending_events, all data-related * interrupts must be disabled and @data_status updated with a * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the - * CMDRDY interupt must be disabled and @cmd_status updated with a + * CMDRDY interrupt must be disabled and @cmd_status updated with a * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the * bytes_xfered field of @data must be written. This is ensured by * using barriers. @@ -1082,7 +1082,7 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) /* * Update the MMC clock rate if necessary. This may be * necessary if set_ios() is called when a different slot is - * busy transfering data. + * busy transferring data. */ if (host->need_clock_update) { mci_writel(host, MR, host->mode_reg); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 2f7fc0c..7c1e16a 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -99,7 +99,7 @@ #define r1b_timeout (HZ * 3)

/* One of the critical speed parameters is the amount of data which may - * be transfered in one command. If this value is too low, the SD card + * be transferred in one command. If this value is too low, the SD card * controller has to do multiple partial block writes (argggh!). With * today (2008) SD cards there is little speed gain if we transfer more * than 64 KBytes at a time. So use this value until there is any indication diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 1ccd4b2..a04f87d 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -874,7 +874,7 @@ static void finalize_request(struct s3cmci_host *host) if (!mrq->data) goto request_done;

- /* Calulate the amout of bytes transfer if there was no error */ + /* Calculate the amout of bytes transfer if there was no error */ if (mrq->data->error == 0) { mrq->data->bytes_xfered = (mrq->data->blocks * mrq->data->blksz); @@ -882,7 +882,7 @@ static void finalize_request(struct s3cmci_host *host) mrq->data->bytes_xfered = 0; }

- /* If we had an error while transfering data we flush the + /* If we had an error while transferring data we flush the * DMA channel and the fifo to clear out any garbage. */ if (mrq->data->error != 0) { if (s3cmci_host_usedma(host)) @@ -980,7 +980,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)

if ((data->blksz & 3) != 0) { /* We cannot deal with unaligned blocks with more than - * one block being transfered. */ + * one block being transferred. */

if (data->blocks > 1) { pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz); diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 6ae8d2f..62d37de 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -355,7 +355,7 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command /* * This chip always returns (at least?) as much data as you ask for. * I'm unsure what happens if you ask for less than a block. This should be - * looked into to ensure that a funny length read doesnt hose the controller. + * looked into to ensure that a funny length read doesn't hose the controller. */ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) { diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index 7fca0a3..62e5a4d 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -484,7 +484,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)

/* * Check that we aren't being called after the - * entire buffer has been transfered. + * entire buffer has been transferred. */ if (host->num_sg == 0) return; @@ -828,7 +828,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq) /* * If this is a data transfer the request * will be finished after the data has - * transfered. + * transferred. */ if (cmd->data && !cmd->error) { /* @@ -904,7 +904,7 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) setup &= ~WBSD_DAT3_H;

/* - * We cannot resume card detection immediatly + * We cannot resume card detection immediately * because of capacitance and delays in the chip. */ mod_timer(&host->ignore_timer, jiffies + HZ / 100); diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index 35c6a23..b1e3c26 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -19,7 +19,7 @@ config MTD_JEDECPROBE help This option enables JEDEC-style probing of flash chips which are not compatible with the Common Flash Interface, but will use the common - CFI-targetted flash drivers for any chips which are identified which + CFI-targeted flash drivers for any chips which are identified which are in fact compatible in all but the probe method. This actually covers most AMD/Fujitsu-compatible chips and also non-CFI Intel chips. diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 092aef1..09cb7c8 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -1247,12 +1247,12 @@ static int inval_cache_and_wait_for_operation( break;

if (chip->erase_suspended && chip_state == FL_ERASING) { - /* Erase suspend occured while sleep: reset timeout */ + /* Erase suspend occurred while sleep: reset timeout */ timeo = reset_timeo; chip->erase_suspended = 0; } if (chip->write_suspended && chip_state == FL_WRITING) { - /* Write suspend occured while sleep: reset timeout */ + /* Write suspend occurred while sleep: reset timeout */ timeo = reset_timeo; chip->write_suspended = 0; } diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index f9a5331..0b49266 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -263,7 +263,7 @@ static void fixup_old_sst_eraseregion(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv;

/* - * These flashes report two seperate eraseblock regions based on the + * These flashes report two separate eraseblock regions based on the * sector_erase-size and block_erase-size, although they both operate on the * same memory. This is not allowed according to CFI, so we just pick the * sector_erase-size. @@ -611,8 +611,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) * * Note that anything more complicated than checking if no bits are toggling * (including checking DQ5 for an error status) is tricky to get working - * correctly and is therefore not done (particulary with interleaved chips - * as each chip must be checked independantly of the others). + * correctly and is therefore not done (particularly with interleaved chips + * as each chip must be checked independently of the others). */ static int __xipram chip_ready(struct map_info *map, unsigned long addr) { @@ -635,8 +635,8 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr) * * Note that anything more complicated than checking if no bits are toggling * (including checking DQ5 for an error status) is tricky to get working - * correctly and is therefore not done (particulary with interleaved chips - * as each chip must be checked independantly of the others). + * correctly and is therefore not done (particularly with interleaved chips + * as each chip must be checked independently of the others). * */ static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected) diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 6ae3d11..8e46405 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -1,6 +1,6 @@ /* * Common Flash Interface support: - * Generic utility functions not dependant on command set + * Generic utility functions not dependent on command set * * Copyright (C) 2002 Red Hat * Copyright (C) 2003 STMicroelectronics Limited diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 4e1be51..ea832ea 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -2075,7 +2075,7 @@ static inline int jedec_match( uint32_t base, }

/* - * Make sure the ID's dissappear when the device is taken out of + * Make sure the ID's disappear when the device is taken out of * ID mode. The only time this should fail when it should succeed * is when the ID's are written as data to the same * addresses. For this rare and unfortunate case the chip diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index f29a6f9..97183c8 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -295,7 +295,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.owner = THIS_MODULE;

if (add_mtd_device(&dev->mtd)) { - /* Device didnt get added, so free the entry */ + /* Device didn't get added, so free the entry */ goto devinit_err; } list_add(&dev->list, &blkmtd_device_list); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 719b291..8b36fa7 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -90,7 +90,7 @@ static inline int DoC_WaitReady(void __iomem * docptr) return ret; }

-/* For some reason the Millennium Plus seems to occassionally put itself +/* For some reason the Millennium Plus seems to occasionally put itself * into reset mode. For me this happens randomly, with no pattern that I * can detect. M-systems suggest always check this on any block level * operation and setting to normal mode if in reset mode. diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c index a99838b..37ef29a 100644 --- a/drivers/mtd/devices/docecc.c +++ b/drivers/mtd/devices/docecc.c @@ -109,7 +109,7 @@ for(ci=(n)-1;ci >=0;ci--)\ of the integer "alpha_to[i]" with a(0) being the LSB and a(m-1) the MSB. Thus for example the polynomial representation of @^5 would be given by the binary representation of the integer "alpha_to[5]". - Similarily, index_of[] can be used as follows: + Similarly, index_of[] can be used as follows: As above, let @ represent the primitive element of GF(2^m) that is the root of the primitive polynomial p(x). In order to find the power of @ (alpha) that has the polynomial representation @@ -121,7 +121,7 @@ for(ci=(n)-1;ci >=0;ci--)\ NOTE: The element alpha_to[2^m-1] = 0 always signifying that the representation of "@^infinity" = 0 is (0,0,0,...,0). - Similarily, the element index_of[0] = A0 always signifying + Similarly, the element index_of[0] = A0 always signifying that the power of alpha which has the polynomial representation (0,0,...,0) is "infinity".

diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index caf6041..4b829f9 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -353,7 +353,7 @@ static inline int erase_block (__u32 offset) /* put the flash back into command mode */ write32 (DATA_TO_FLASH (READ_ARRAY),offset);

- /* was the erase successfull? */ + /* was the erase successful? */ if ((status & STATUS_ERASE_ERR)) { printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset); @@ -508,7 +508,7 @@ static inline int write_dword (__u32 offset,__u32 x) /* put the flash back into command mode */ write32 (DATA_TO_FLASH (READ_ARRAY),offset);

- /* was the write successfull? */ + /* was the write successful? */ if ((status & STATUS_PGM_ERR) || read32 (offset) != x) { printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset); diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index ef0aba0..41b8cdc 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -351,7 +351,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, * Fixup routines for the V370PDC * PCI device ID 0x020011b0 * - * This function basicly kick starts the DRAM oboard the card and gets it + * This function basically kick starts the DRAM oboard the card and gets it * ready to be used. Before this is done the device reads VERY erratic, so * much that it can crash the Linux 2.2.x series kernels when a user cat's * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL @@ -540,7 +540,7 @@ static u32 fixup_pmc551(struct pci_dev *dev)

/* * Check to make certain the DEVSEL is set correctly, this device - * has a tendancy to assert DEVSEL and TRDY when a write is performed + * has a tendency to assert DEVSEL and TRDY when a write is performed * to the memory when memory is read-only */ if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) { diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index 04fdfcc..1267992 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -3,7 +3,7 @@ * erase, lock/unlock support for LPDDR flash memories * (C) 2008 Korolev Alexey akorolev@infradead.org * (C) 2008 Vasiliy Leonenko vasiliy.leonenko@gmail.com - * Many thanks to Roman Borisov for intial enabling + * Many thanks to Roman Borisov for initial enabling * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -171,7 +171,7 @@ static int wait_for_ready(struct map_info *map, struct flchip *chip, mutex_lock(&chip->mutex); } if (chip->erase_suspended || chip->write_suspended) { - /* Suspend has occured while sleep: reset timeout */ + /* Suspend has occurred while sleep: reset timeout */ timeo = reset_timeo; chip->erase_suspended = chip->write_suspended = 0; } diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c index e5f645b..23f551d 100644 --- a/drivers/mtd/maps/ceiva.c +++ b/drivers/mtd/maps/ceiva.c @@ -42,7 +42,7 @@ * * Please note: * 1. The flash size given should be the largest flash size that can - * be accomodated. + * be accommodated. * * 2. The bus width must defined in clps_setup_flash. * @@ -58,7 +58,7 @@ #define BOOT_PARTITION_SIZE_KiB (16) #define PARAMS_PARTITION_SIZE_KiB (8) #define KERNEL_PARTITION_SIZE_KiB (4*128) -/* Use both remaing portion of first flash, and all of second flash */ +/* Use both remaining portion of first flash, and all of second flash */ #define ROOT_PARTITION_SIZE_KiB (3*128) + (8*128)

static struct mtd_partition ceiva_partitions[] = { diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c index b4ed816..f71343c 100644 --- a/drivers/mtd/maps/cfi_flagadm.c +++ b/drivers/mtd/maps/cfi_flagadm.c @@ -33,7 +33,7 @@

/* We split the flash chip up into four parts. - * 1: bootloader firts 128k (0x00000000 - 0x0001FFFF) size 0x020000 + * 1: bootloader first 128k (0x00000000 - 0x0001FFFF) size 0x020000 * 2: kernel 640k (0x00020000 - 0x000BFFFF) size 0x0A0000 * 3: compressed 1536k root ramdisk (0x000C0000 - 0x0023FFFF) size 0x180000 * 4: writeable diskpartition (jffs)(0x00240000 - 0x003FFFFF) size 0x1C0000 diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 9170229..6799e75 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -497,7 +497,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) dev->pcmcia_map.set_vpp = pcmciamtd_set_vpp;

/* Request a memory window for PCMCIA. Some architeures can map windows - * upto the maximum that PCMCIA can support (64MiB) - this is ideal and + * up to the maximum that PCMCIA can support (64MiB) - this is ideal and * we aim for a window the size of the whole card - otherwise we try * smaller windows until we succeed */ diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c index acb13fa..64aea6a 100644 --- a/drivers/mtd/maps/pmcmsp-flash.c +++ b/drivers/mtd/maps/pmcmsp-flash.c @@ -3,7 +3,7 @@ * Config with both CFI and JEDEC device support. * * Basically physmap.c with the addition of partitions and - * an array of mapping info to accomodate more than one flash type per board. + * an array of mapping info to accommodate more than one flash type per board. * * Copyright 2005-2007 PMC-Sierra, Inc. * diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 85c1e56..4d8aaaf 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -197,7 +197,7 @@ static void sc520cdp_setup_par(void) }

/* - ** Find the PARxx registers that are reponsible for activating + ** Find the PARxx registers that are responsible for activating ** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a ** new value from the table. */ diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c index c08e140..0718dfb 100644 --- a/drivers/mtd/maps/tqm8xxl.c +++ b/drivers/mtd/maps/tqm8xxl.c @@ -63,7 +63,7 @@ static void __iomem *start_scan_addr; */

#ifdef CONFIG_MTD_PARTITIONS -/* Currently, TQM8xxL has upto 8MiB flash */ +/* Currently, TQM8xxL has up to 8MiB flash */ static unsigned long tqm8xxl_max_flash_size = 0x00800000;

/* partition definition for first flash bank diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 1e74ad9..3326615 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -129,7 +129,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk) return ret;

/* - * Here we could argubly set the cache state to STATE_CLEAN. + * Here we could arguably set the cache state to STATE_CLEAN. * However this could lead to inconsistency since we will not * be notified if this content is altered on the flash by other * means. Let's declare it empty and leave buffering tasks to diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 145b3d0d..4c36ef6 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -234,7 +234,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t * the data. For our userspace tools it is important * to dump areas with ecc errors ! * For kernel internal usage it also might return -EUCLEAN - * to signal the caller that a bitflip has occured and has + * to signal the caller that a bitflip has occurred and has * been corrected by the ECC algorithm. * Userspace software which accesses NAND this way * must be aware of the fact that it deals with NAND diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a92054e..edec457 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -239,7 +239,7 @@ config MTD_NAND_BCM_UMI help This enables the NAND flash controller on the BCM UMI block.

- No board specfic support is done by this driver, each board + No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach.

config MTD_NAND_BCM_UMI_HWCS diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index a067d09..bc65bf7 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -228,7 +228,7 @@ static int __devinit ams_delta_init(struct platform_device *pdev) AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP);

- /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(ams_delta_mtd, 1)) { err = -ENXIO; goto out_mtd; diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index 7c95da1..0911cf0 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -176,7 +176,7 @@ static int __init autcpu12_init(void) */ this->options = NAND_USE_FLASH_BBT;

- /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(autcpu12_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 9f1b451..71c35a0 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -241,7 +241,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) /* Enable the following for a flash based bad block table */ this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;

- /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(new_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 8c8d3c8..4633f09 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -724,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) }

/* This helper function setups the registers for ECC and whether or not - * the spare area will be transfered. */ + * the spare area will be transferred. */ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare) { @@ -965,7 +965,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,

if (ECC_ERROR_CORRECTABLE(err_correction_info)) { /* If err_byte is larger than ECC_SECTOR_SIZE, - * means error happend in OOB, so we ignore + * means error happened in OOB, so we ignore * it. It's no need for us to correct it * err_device is represented the NAND error * bits are happened in if there are more @@ -1109,7 +1109,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, }

/* This is the callback that the NAND core calls to write a page without ECC. - * raw access is similiar to ECC page writes, so all the work is done in the + * raw access is similar to ECC page writes, so all the work is done in the * write_page() function above. */ static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index b7f8de7..96c0b34 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -137,7 +137,7 @@ static struct rs_control *rs_decoder; * * Fabrice Bellard figured this out in the old docecc code. I added * some comments, improved a minor bit and converted it to make use - * of the generic Reed-Solomon libary. tglx + * of the generic Reed-Solomon library. tglx */ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) { @@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);

- /* We cant' use dev_ready here, but at least we wait for the + /* We can't' use dev_ready here, but at least we wait for the * command to complete */ udelay(50); @@ -986,7 +986,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, dummy = ReadDOC(docptr, ECCConf); }

- /* Error occured ? */ + /* Error occurred ? */ if (dummy & 0x80) { for (i = 0; i < 6; i++) { if (DoC_is_MillenniumPlus(doc)) @@ -1160,7 +1160,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio /* NOTE: The lines below modify internal variables of the NAND and MTD layers; variables with have already been configured by nand_scan. Unfortunately, we didn't know before this point what these values - should be. Thus, this code is somewhat dependant on the exact + should be. Thus, this code is somewhat dependent on the exact implementation of the NAND layer. */ if (mh->UnitSizeFactor != 0xff) { this->bbt_erase_shift += (0xff - mh->UnitSizeFactor); diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 7a13d42..537e380 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -59,7 +59,7 @@ struct fsl_elbc_mtd { unsigned int fmr; /* FCM Flash Mode Register value */ };

-/* Freescale eLBC FCM controller infomation */ +/* Freescale eLBC FCM controller information */

struct fsl_elbc_fcm_ctrl { struct nand_hw_control controller; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 205b10b..0d45ef3 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -335,7 +335,7 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)

/* * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by - * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto + * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to * max of 8-bits) */ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, @@ -381,7 +381,7 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,

/* * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by - * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto + * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to * max of 1-bit) */ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, @@ -408,10 +408,10 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, * @buf: buffer to store read data * @page: page number to read * - * This routine is needed for fsmc verison 8 as reading from NAND chip has to be + * This routine is needed for fsmc version 8 as reading from NAND chip has to be * performed in a strict sequence as follows: * data(512 byte) -> ecc(13 byte) - * After this read, fsmc hardware generates and reports error data bits(upto a + * After this read, fsmc hardware generates and reports error data bits(up to a * max of 8 bits) */ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, @@ -686,7 +686,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) }

/* - * Scan to find existance of the device + * Scan to find existence of the device */ if (nand_scan_ident(&host->mtd, 1, NULL)) { ret = -ENXIO; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 85cfc06..c54a4cb 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1582,7 +1582,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, }

/** - * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc + * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from * @len: number of bytes to read diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index a1e8b30..af46428 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -945,7 +945,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc rd2 = NULL; /* Per chip or per device ? */ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1; - /* Mirrored table avilable ? */ + /* Mirrored table available ? */ if (md) { if (td->pages[i] == -1 && md->pages[i] == -1) { writeops = 0x03; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 213181b..893d95b 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -162,7 +162,7 @@ MODULE_PARM_DESC(bitflips, "Maximum number of random bit flips per page (z MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]" " separated by commas e.g. 1401:2 means page 1401" " can be read only twice before failing"); -MODULE_PARM_DESC(rptwear, "Number of erases inbetween reporting wear, if not zero"); +MODULE_PARM_DESC(rptwear, "Number of erases between reporting wear, if not zero"); MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. " "The size is specified in erase blocks and as the exponent of a power of two" " e.g. 5 means a size of 32 erase blocks"); diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c index 8c0b693..a045a4a 100644 --- a/drivers/mtd/nand/nomadik_nand.c +++ b/drivers/mtd/nand/nomadik_nand.c @@ -151,7 +151,7 @@ static int nomadik_nand_probe(struct platform_device *pdev) nand->options = pdata->options;

/* - * Scan to find existance of the device + * Scan to find existence of the device */ if (nand_scan(&host->mtd, 1)) { ret = -ENXIO; diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 59efa82..20bfe5f 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -157,7 +157,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) /* Enable the following for a flash based bad block table */ chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;

- /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(pasemi_nand_mtd, 1)) { err = -ENXIO; goto out_lpc; diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 317aff4..caf5a73 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -95,7 +95,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) goto out; }

- /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(&data->mtd, pdata->chip.nr_chips)) { err = -ENXIO; goto out; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index ab7f4c3..ff07012 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -184,7 +184,7 @@ struct pxa3xx_nand_info {

static int use_dma = 1; module_param(use_dma, bool, 0444); -MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW"); +MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");

/* * Default NAND flash controller configuration setup by the diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 6322d1f..cae2e01 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -185,7 +185,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)

dbg_verbose("doing dma %s ", do_read ? "read" : "write");

- /* Set intial dma state: for reading first fill on board buffer, + /* Set initial dma state: for reading first fill on board buffer, from device, for writes first fill the buffer from memory*/ dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;

@@ -766,7 +766,7 @@ static irqreturn_t r852_irq(int irq, void *data) ret = IRQ_HANDLED; dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);

- /* we shouldn't recieve any interrupts if we wait for card + /* we shouldn't receive any interrupts if we wait for card to settle */ WARN_ON(dev->card_unstable);

@@ -794,13 +794,13 @@ static irqreturn_t r852_irq(int irq, void *data) ret = IRQ_HANDLED;

if (dma_status & R852_DMA_IRQ_ERROR) { - dbg("recieved dma error IRQ"); + dbg("received dma error IRQ"); r852_dma_done(dev, -EIO); complete(&dev->dma_done); goto out; }

- /* recieved DMA interrupt out of nowhere? */ + /* received DMA interrupt out of nowhere? */ WARN_ON_ONCE(dev->dma_stage == 0);

if (dev->dma_stage == 0) @@ -960,7 +960,7 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) &dev->card_detect_work, 0);

- printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n"); + printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n"); return 0;

error10: diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 546c2f0..81bbb5e 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -78,7 +78,7 @@ static void start_translation(struct sh_flctl *flctl)

static void timeout_error(struct sh_flctl *flctl, const char *str) { - dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str); + dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str); }

static void wait_completion(struct sh_flctl *flctl) diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index 4a8f367..57cc80c 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -121,7 +121,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia) if (ret) return ret;

- /* Bad block marker postion */ + /* Bad block marker position */ chip->badblockpos = 0x05; chip->badblockbits = 7; chip->block_markbad = sm_block_markbad; diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 38fb167..14c5787 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -4,7 +4,7 @@ * Slightly murky pre-git history of the driver: * * Copyright (c) Ian Molton 2004, 2005, 2008 - * Original work, independant of sharps code. Included hardware ECC support. + * Original work, independent of sharps code. Included hardware ECC support. * Hard ECC did not work for writes in the early revisions. * Copyright (c) Dirk Opfer 2005. * Modifications developed from sharps code but diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index f591f61..1fcb41a 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -608,7 +608,7 @@ static int omap2_onenand_enable(struct mtd_info *mtd)

ret = regulator_enable(c->regulator); if (ret != 0) - dev_err(&c->pdev->dev, "cant enable regulator\n"); + dev_err(&c->pdev->dev, "can't enable regulator\n");

return ret; } @@ -620,7 +620,7 @@ static int omap2_onenand_disable(struct mtd_info *mtd)

ret = regulator_disable(c->regulator); if (ret != 0) - dev_err(&c->pdev->dev, "cant disable regulator\n"); + dev_err(&c->pdev->dev, "can't disable regulator\n");

return ret; } diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c index 8b24606..5ef3bd54 100644 --- a/drivers/mtd/onenand/onenand_sim.c +++ b/drivers/mtd/onenand/onenand_sim.c @@ -321,7 +321,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, continue; if (memcmp(dest + off, ffchars, this->subpagesize) && onenand_check_overwrite(dest + off, src + off, this->subpagesize)) - printk(KERN_ERR "over-write happend at 0x%08x\n", offset); + printk(KERN_ERR "over-write happened at 0x%08x\n", offset); memcpy(dest + off, src + off, this->subpagesize); } /* Fall through */ @@ -335,7 +335,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, dest = ONENAND_CORE_SPARE(flash, this, offset); if (memcmp(dest, ffchars, mtd->oobsize) && onenand_check_overwrite(dest, src, mtd->oobsize)) - printk(KERN_ERR "OOB: over-write happend at 0x%08x\n", + printk(KERN_ERR "OOB: over-write happened at 0x%08x\n", offset); memcpy(dest, src, mtd->oobsize); break; diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index 2b0daae..ed3d6cd 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -540,7 +540,7 @@ static int sm_check_block(struct sm_ftl *ftl, int zone, int block) return -EIO; }

- /* If the block is sliced (partialy erased usually) erase it */ + /* If the block is sliced (partially erased usually) erase it */ if (i == 2) { sm_erase_block(ftl, zone, block, 1); return 1; @@ -878,7 +878,7 @@ static int sm_init_zone(struct sm_ftl *ftl, int zone_num) return 0; }

-/* Get and automaticly initialize an FTL mapping for one zone */ +/* Get and automatically initialize an FTL mapping for one zone */ struct ftl_zone *sm_get_zone(struct sm_ftl *ftl, int zone_num) { struct ftl_zone *zone; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 11eb8ef..d2d12ab 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -968,7 +968,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, * contains garbage because of a power cut during erase * operation. So we just schedule this PEB for erasure. * - * Besides, in case of NOR flash, we deliberatly + * Besides, in case of NOR flash, we deliberately * corrupt both headers because NOR flash erasure is * slow and can start from the end. */ diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c index 9e1c03e..5420f6d 100644 --- a/drivers/net/3c501.c +++ b/drivers/net/3c501.c @@ -399,7 +399,7 @@ static void el_timeout(struct net_device *dev) * as we may still be attempting to retrieve the last RX packet buffer. * * When a transmit times out we dump the card into control mode and just - * start again. It happens enough that it isnt worth logging. + * start again. It happens enough that it isn't worth logging. * * We avoid holding the spin locks when doing the packet load to the board. * The device is very slow, and its DMA mode is even slower. If we held the @@ -499,7 +499,7 @@ static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev) * * Handle the ether interface interrupts. The 3c501 needs a lot more * hand holding than most cards. In particular we get a transmit interrupt - * with a collision error because the board firmware isnt capable of rewinding + * with a collision error because the board firmware isn't capable of rewinding * its own transmit buffer pointers. It can however count to 16 for us. * * On the receive side the card is also very dumb. It has no buffering to @@ -732,7 +732,7 @@ static void el_receive(struct net_device *dev) * el_reset: Reset a 3c501 card * @dev: The 3c501 card about to get zapped * - * Even resetting a 3c501 isnt simple. When you activate reset it loses all + * Even resetting a 3c501 isn't simple. When you activate reset it loses all * its configuration. You must hold the lock when doing this. The function * cannot take the lock itself as it is callable from the irq handler. */ diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c index de579d0..bc0d1a1 100644 --- a/drivers/net/3c523.c +++ b/drivers/net/3c523.c @@ -44,7 +44,7 @@ this for the 64K version would require a lot of heinous bank switching, which I'm sure not interested in doing. If you try to implement a bank switching version, you'll basically have to remember - what bank is enabled and do a switch everytime you access a memory + what bank is enabled and do a switch every time you access a memory location that's not current. You'll also have to remap pointers on the driver side, because it only knows about 16K of the memory. Anyone desperate or masochistic enough to try? diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index 8c094ba..d9d056d 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -51,7 +51,7 @@ DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter <rnp@paradise.net. * circular buffer queues. * * The mailboxes can be used for controlling how the card traverses - * its buffer rings, but are used only for inital setup in this + * its buffer rings, but are used only for initial setup in this * implementation. The exec mailbox allows a variety of commands to * be executed. Each command must complete before the next is * executed. Primarily we use the exec mailbox for controlling the @@ -813,7 +813,7 @@ static void mc32_flush_rx_ring(struct net_device *dev) * * This sets up the host transmit data-structures. * - * First, we obtain from the card it's current postion in the tx + * First, we obtain from the card it's current position in the tx * ring, so that we will know where to begin transmitting * packets. * diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 0a92436f..8cc2256 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -984,7 +984,7 @@ static int __init vortex_eisa_init(void) * any device have been found when we exit from * eisa_driver_register (the bus root driver may not be * initialized yet). So we blindly assume something was - * found, and let the sysfs magic happend... + * found, and let the sysfs magic happened... */ eisa_found = 1; } diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index 41d9911..ee648fe 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -1584,7 +1584,7 @@ static void ace_watchdog(struct net_device *data) /* * We haven't received a stats update event for more than 2.5 * seconds and there is data in the transmit queue, thus we - * asume the card is stuck. + * assume the card is stuck. */ if (*ap->tx_csm != ap->tx_ret_csm) { printk(KERN_WARNING "%s: Transmitter is stuck, %08x\n", @@ -2564,7 +2564,7 @@ restart:

/* * A TX-descriptor producer (an IRQ) might have gotten - * inbetween, making the ring free again. Since xmit is + * between, making the ring free again. Since xmit is * serialized, this is the only situation we have to * re-test. */ diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index 2ca880b..88495c4 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1398,7 +1398,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev) mc_filter[1] = mc_filter[0] = 0; lp->options &= ~OPTION_MULTICAST_ENABLE; amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF); - /* disable promiscous mode */ + /* disable promiscuous mode */ writel(PROM, lp->mmio + CMD2); return; } diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index f4744fc..65a78f9 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -133,7 +133,7 @@ struct net_local { /* Run-time register bank 2 definitions. */ #define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ #define TX_START 10 -#define COL16CNTL 11 /* Controll Reg for 16 collisions */ +#define COL16CNTL 11 /* Control Reg for 16 collisions */ #define MODE13 13 #define RX_CTRL 14 /* Configuration registers only on the '865A/B chips. */ diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index 1ff001a..b0a71e2 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -2509,7 +2509,7 @@ static struct pci_driver atl1e_driver = { .id_table = atl1e_pci_tbl, .probe = atl1e_probe, .remove = __devexit_p(atl1e_remove), - /* Power Managment Hooks */ + /* Power Management Hooks */ #ifdef CONFIG_PM .suspend = atl1e_suspend, .resume = atl1e_resume, diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c index e637e9f..f46ee45 100644 --- a/drivers/net/atlx/atl2.c +++ b/drivers/net/atlx/atl2.c @@ -1701,7 +1701,7 @@ static struct pci_driver atl2_driver = { .id_table = atl2_pci_tbl, .probe = atl2_probe, .remove = __devexit_p(atl2_remove), - /* Power Managment Hooks */ + /* Power Management Hooks */ .suspend = atl2_suspend, #ifdef CONFIG_PM .resume = atl2_resume, diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c index e94a966a..c48104b 100644 --- a/drivers/net/bcm63xx_enet.c +++ b/drivers/net/bcm63xx_enet.c @@ -597,7 +597,7 @@ static int bcm_enet_set_mac_address(struct net_device *dev, void *p) }

/* - * Change rx mode (promiscous/allmulti) and update multicast list + * Change rx mode (promiscuous/allmulti) and update multicast list */ static void bcm_enet_set_multicast_list(struct net_device *dev) { diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 5a4a87e..1e2d825 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1331,7 +1331,7 @@ err:

/* * Uses MCC for this command as it may be called in BH context - * (mc == NULL) => multicast promiscous + * (mc == NULL) => multicast promiscuous */ int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id, struct net_device *netdev, struct be_dma_mem *mem) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index a71163f..9a54c8b 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -708,7 +708,7 @@ static void be_set_multicast_list(struct net_device *netdev) goto done; }

- /* BE was previously in promiscous mode; disable it */ + /* BE was previously in promiscuous mode; disable it */ if (adapter->promiscuous) { adapter->promiscuous = false; be_cmd_promiscuous_config(adapter, adapter->port_num, 0); diff --git a/drivers/net/bna/bna_hw.h b/drivers/net/bna/bna_hw.h index 806b224..6cb8969 100644 --- a/drivers/net/bna/bna_hw.h +++ b/drivers/net/bna/bna_hw.h @@ -897,7 +897,7 @@ static struct bna_ritseg_pool_cfg name[BFI_RIT_SEG_TOTAL_POOLS] = \ * Catapult RSS Table Base Offset Address * * Exists in RAD memory space. - * Each entry is 352 bits, but alligned on + * Each entry is 352 bits, but aligned on * 64 byte (512 bit) boundary. Accessed * 4 byte words, the whole entry can be * broken into 11 word accesses. diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index b7ff87b..e0fca70 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -1220,7 +1220,7 @@ struct bnx2x { struct bnx2x_dcbx_port_params dcbx_port_params; int dcb_version;

- /* DCBX Negotation results */ + /* DCBX Negotiation results */ struct dcbx_features dcbx_local_feat; u32 dcbx_error; u32 pending_max; diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index be503cc..dac1bf9 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -3019,7 +3019,7 @@ struct tstorm_eth_mac_filter_config {

/* - * common flag to indicate existance of TPA. + * common flag to indicate existence of TPA. */ struct tstorm_eth_tpa_exist { #if defined(__BIG_ENDIAN) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index f2f367d..974ef2b 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -2823,7 +2823,7 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, struct link_params *params) { u16 cnt, ctrl; - /* Wait for soft reset to get cleared upto 1 sec */ + /* Wait for soft reset to get cleared up to 1 sec */ for (cnt = 0; cnt < 1000; cnt++) { bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl); @@ -4141,7 +4141,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, val = (1<<5); /* * Note that 2.5G works only when used with 1G - * advertisment + * advertisement */ } else val = (1<<5); @@ -4151,7 +4151,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) val |= (1<<7);

- /* Note that 2.5G works only when used with 1G advertisment */ + /* Note that 2.5G works only when used with 1G advertisement */ if (phy->speed_cap_mask & (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) @@ -5232,14 +5232,14 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1); } else { - /* Force 1Gbps using autoneg with 1G advertisment */ + /* Force 1Gbps using autoneg with 1G advertisement */

/* Allow CL37 through CL73 */ DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);

- /* Enable Full-Duplex advertisment on CL37 */ + /* Enable Full-Duplex advertisement on CL37 */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020); /* Enable CL37 AN */ @@ -6269,7 +6269,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,

switch (actual_phy_selection) { case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: - /* Do nothing. Essentialy this is like the priority copper */ + /* Do nothing. Essentially this is like the priority copper */ break; case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER; @@ -7765,7 +7765,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);

msleep(10); - /* The PHY reset is controled by GPIO 1 + /* The PHY reset is controlled by GPIO 1 * Hold it as vars low */ /* clear link led */ diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 32e64cc8..a97a4a1 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -3702,7 +3702,7 @@ static void bnx2x_eq_int(struct bnx2x *bp) if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) hw_cons++;

- /* This function may never run in parralel with itself for a + /* This function may never run in parallel with itself for a * specific bp, thus there is no need in "paired" read memory * barrier here. */ @@ -5089,7 +5089,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code) /* Step 1: set zeroes to all ilt page entries with valid bit on * Step 2: set the timers first/last ilt entry to point * to the entire range to prevent ILT range error for 3rd/4th - * vnic (this code assumes existance of the vnic) + * vnic (this code assumes existence of the vnic) * * both steps performed by call to bnx2x_ilt_client_init_op() * with dummy TM client @@ -8685,7 +8685,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) E1H_FUNC_MAX * sizeof(struct drv_func_mb); /* * get mf configuration: - * 1. existance of MF configuration + * 1. existence of MF configuration * 2. MAC address must be legal (check only upper bytes) * for Switch-Independent mode; * OVLAN must be legal for Switch-Dependent mode @@ -8727,7 +8727,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) default: /* Unknown configuration: reset mf_config */ bp->mf_config[vn] = 0; - DP(NETIF_MSG_PROBE, "Unkown MF mode 0x%x\n", + DP(NETIF_MSG_PROBE, "Unknown MF mode 0x%x\n", val); } } @@ -9777,7 +9777,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,

#endif

- /* Configure interupt mode: try to enable MSI-X/MSI if + /* Configure interrupt mode: try to enable MSI-X/MSI if * needed, set bp->num_queues appropriately. */ bnx2x_set_int_mode(bp); diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 1c89f19..1509a23 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -175,9 +175,9 @@ the initial credit value; read returns the current value of the credit counter. Must be initialized to 1 at start-up. */ #define CCM_REG_CFC_INIT_CRD 0xd0204 -/* [RW 2] Auxillary counter flag Q number 1. */ +/* [RW 2] Auxiliary counter flag Q number 1. */ #define CCM_REG_CNT_AUX1_Q 0xd00c8 -/* [RW 2] Auxillary counter flag Q number 2. */ +/* [RW 2] Auxiliary counter flag Q number 2. */ #define CCM_REG_CNT_AUX2_Q 0xd00cc /* [RW 28] The CM header value for QM request (primary). */ #define CCM_REG_CQM_CCM_HDR_P 0xd008c @@ -457,13 +457,13 @@ #define CSDM_REG_AGG_INT_MODE_9 0xc21dc /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008 -/* [RW 16] The maximum value of the competion counter #0 */ +/* [RW 16] The maximum value of the completion counter #0 */ #define CSDM_REG_CMP_COUNTER_MAX0 0xc201c -/* [RW 16] The maximum value of the competion counter #1 */ +/* [RW 16] The maximum value of the completion counter #1 */ #define CSDM_REG_CMP_COUNTER_MAX1 0xc2020 -/* [RW 16] The maximum value of the competion counter #2 */ +/* [RW 16] The maximum value of the completion counter #2 */ #define CSDM_REG_CMP_COUNTER_MAX2 0xc2024 -/* [RW 16] The maximum value of the competion counter #3 */ +/* [RW 16] The maximum value of the completion counter #3 */ #define CSDM_REG_CMP_COUNTER_MAX3 0xc2028 /* [RW 13] The start address in the internal RAM for the completion counters. */ @@ -851,7 +851,7 @@ #define IGU_REG_ATTN_MSG_ADDR_L 0x130120 /* [R 4] Debug: [3] - attention write done message is pending (0-no pending; * 1-pending). [2:0] = PFID. Pending means attention message was sent; but - * write done didnt receive. */ + * write done didn't receive. */ #define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030 #define IGU_REG_BLOCK_CONFIGURATION 0x130000 #define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124 @@ -862,7 +862,7 @@ #define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200 /* [R 5] Debug: ctrl_fsm */ #define IGU_REG_CTRL_FSM 0x130064 -/* [R 1] data availble for error memory. If this bit is clear do not red +/* [R 1] data available for error memory. If this bit is clear do not red * from error_handling_memory. */ #define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130 /* [RW 11] Parity mask register #0 read/write */ @@ -3015,7 +3015,7 @@ block. Should be used for close the gates. */ #define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit - should update accoring to 'hst_discard_doorbells' register when the state + should update according to 'hst_discard_doorbells' register when the state machine is idle */ #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0 /* [RW 1] When 1; new internal writes arriving to the block are discarded. @@ -3023,7 +3023,7 @@ #define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1' means this PSWHST is discarding inputs from this client. Each bit should - update accoring to 'hst_discard_internal_writes' register when the state + update according to 'hst_discard_internal_writes' register when the state machine is idle. */ #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c /* [WB 160] Used for initialization of the inbound interrupts memory */ @@ -3822,13 +3822,13 @@ #define TSDM_REG_AGG_INT_T_1 0x420bc /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define TSDM_REG_CFC_RSP_START_ADDR 0x42008 -/* [RW 16] The maximum value of the competion counter #0 */ +/* [RW 16] The maximum value of the completion counter #0 */ #define TSDM_REG_CMP_COUNTER_MAX0 0x4201c -/* [RW 16] The maximum value of the competion counter #1 */ +/* [RW 16] The maximum value of the completion counter #1 */ #define TSDM_REG_CMP_COUNTER_MAX1 0x42020 -/* [RW 16] The maximum value of the competion counter #2 */ +/* [RW 16] The maximum value of the completion counter #2 */ #define TSDM_REG_CMP_COUNTER_MAX2 0x42024 -/* [RW 16] The maximum value of the competion counter #3 */ +/* [RW 16] The maximum value of the completion counter #3 */ #define TSDM_REG_CMP_COUNTER_MAX3 0x42028 /* [RW 13] The start address in the internal RAM for the completion counters. */ @@ -4284,13 +4284,13 @@ #define USDM_REG_AGG_INT_T_6 0xc40d0 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define USDM_REG_CFC_RSP_START_ADDR 0xc4008 -/* [RW 16] The maximum value of the competion counter #0 */ +/* [RW 16] The maximum value of the completion counter #0 */ #define USDM_REG_CMP_COUNTER_MAX0 0xc401c -/* [RW 16] The maximum value of the competion counter #1 */ +/* [RW 16] The maximum value of the completion counter #1 */ #define USDM_REG_CMP_COUNTER_MAX1 0xc4020 -/* [RW 16] The maximum value of the competion counter #2 */ +/* [RW 16] The maximum value of the completion counter #2 */ #define USDM_REG_CMP_COUNTER_MAX2 0xc4024 -/* [RW 16] The maximum value of the competion counter #3 */ +/* [RW 16] The maximum value of the completion counter #3 */ #define USDM_REG_CMP_COUNTER_MAX3 0xc4028 /* [RW 13] The start address in the internal RAM for the completion counters. */ @@ -4798,13 +4798,13 @@ #define XSDM_REG_AGG_INT_MODE_1 0x1661bc /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define XSDM_REG_CFC_RSP_START_ADDR 0x166008 -/* [RW 16] The maximum value of the competion counter #0 */ +/* [RW 16] The maximum value of the completion counter #0 */ #define XSDM_REG_CMP_COUNTER_MAX0 0x16601c -/* [RW 16] The maximum value of the competion counter #1 */ +/* [RW 16] The maximum value of the completion counter #1 */ #define XSDM_REG_CMP_COUNTER_MAX1 0x166020 -/* [RW 16] The maximum value of the competion counter #2 */ +/* [RW 16] The maximum value of the completion counter #2 */ #define XSDM_REG_CMP_COUNTER_MAX2 0x166024 -/* [RW 16] The maximum value of the competion counter #3 */ +/* [RW 16] The maximum value of the completion counter #3 */ #define XSDM_REG_CMP_COUNTER_MAX3 0x166028 /* [RW 13] The start address in the internal RAM for the completion counters. */ diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h index 118c28a..b3bc750 100644 --- a/drivers/net/bonding/bond_alb.h +++ b/drivers/net/bonding/bond_alb.h @@ -76,7 +76,7 @@ struct tlb_client_info { */ u32 tx_bytes; /* Each Client acumulates the BytesTx that * were tranmitted to it, and after each - * CallBack the LoadHistory is devided + * CallBack the LoadHistory is divided * by the balance interval */ u32 load_history; /* This field contains the amount of Bytes diff --git a/drivers/net/caif/caif_shmcore.c b/drivers/net/caif/caif_shmcore.c index 8051116..731aa11 100644 --- a/drivers/net/caif/caif_shmcore.c +++ b/drivers/net/caif/caif_shmcore.c @@ -591,7 +591,7 @@ int caif_shmcore_probe(struct shmdev_layer *pshm_dev) (NR_TX_BUF * TX_BUF_SZ + NR_RX_BUF * RX_BUF_SZ)) {

pr_warn("ERROR, Amount of available" - " Phys. SHM cannot accomodate current SHM " + " Phys. SHM cannot accommodate current SHM " "driver configuration, Bailing out ...\n"); free_netdev(pshm_dev->pshm_netdev); return -ENOMEM; diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c index 20da199..57e6393 100644 --- a/drivers/net/caif/caif_spi.c +++ b/drivers/net/caif/caif_spi.c @@ -397,7 +397,7 @@ int cfspi_xmitlen(struct cfspi *cfspi) int pkts = 0;

/* - * Decommit previously commited frames. + * Decommit previously committed frames. * skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead) */ while (skb_peek(&cfspi->chead)) { diff --git a/drivers/net/caif/caif_spi_slave.c b/drivers/net/caif/caif_spi_slave.c index 1b9943a..b009e03 100644 --- a/drivers/net/caif/caif_spi_slave.c +++ b/drivers/net/caif/caif_spi_slave.c @@ -98,7 +98,7 @@ void cfspi_xfer(struct work_struct *work)

cfspi_dbg_state(cfspi, CFSPI_STATE_FETCH_PKT);

- /* Copy commited SPI frames after the SPI indication. */ + /* Copy committed SPI frames after the SPI indication. */ ptr = (u8 *) cfspi->xfer.va_tx; ptr += SPI_IND_SZ; len = cfspi_xmitfrm(cfspi, ptr, cfspi->tx_cpck_len); @@ -158,7 +158,7 @@ void cfspi_xfer(struct work_struct *work)

cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE);

- /* Signal that we are ready to recieve data. */ + /* Signal that we are ready to receive data. */ cfspi->dev->sig_xfer(true, cfspi->dev);

cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE); diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 57d2ffb..74efb5a 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -416,7 +416,7 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)

stats->tx_bytes += cf->can_dlc;

- /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */ + /* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */ can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST);

/* @@ -782,7 +782,7 @@ static void at91_irq_tx(struct net_device *dev, u32 reg_sr) reg_msr = at91_read(priv, AT91_MSR(mb)); if (likely(reg_msr & AT91_MSR_MRDY && ~reg_msr & AT91_MSR_MABT)) { - /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */ + /* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */ can_get_echo_skb(dev, mb - AT91_MB_TX_FIRST); dev->stats.tx_packets++; } diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 3155295..7e5cc0b 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -813,7 +813,7 @@ static int c_can_handle_state_change(struct net_device *dev, struct sk_buff *skb; struct can_berr_counter bec;

- /* propogate the error condition to the CAN stack */ + /* propagate the error condition to the CAN stack */ skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) return 0; @@ -887,7 +887,7 @@ static int c_can_handle_bus_err(struct net_device *dev, if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR) return 0;

- /* propogate the error condition to the CAN stack */ + /* propagate the error condition to the CAN stack */ skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) return 0; diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index 102b16c..587fba4 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -274,7 +274,7 @@ static inline void ican3_set_page(struct ican3_dev *mod, unsigned int page) */

/* - * Recieve a message from the ICAN3 "old-style" firmware interface + * Receive a message from the ICAN3 "old-style" firmware interface * * LOCKING: must hold mod->lock * @@ -1050,7 +1050,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg) complete(&mod->termination_comp); break; default: - dev_err(mod->dev, "recieved an unknown inquiry response\n"); + dev_err(mod->dev, "received an unknown inquiry response\n"); break; } } @@ -1058,7 +1058,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg) static void ican3_handle_unknown_message(struct ican3_dev *mod, struct ican3_msg *msg) { - dev_warn(mod->dev, "recieved unknown message: spec 0x%.2x length %d\n", + dev_warn(mod->dev, "received unknown message: spec 0x%.2x length %d\n", msg->spec, le16_to_cpu(msg->len)); }

@@ -1113,7 +1113,7 @@ static bool ican3_txok(struct ican3_dev *mod) }

/* - * Recieve one CAN frame from the hardware + * Receive one CAN frame from the hardware * * CONTEXT: must be called from user context */ diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c index 74cd880..92feac6 100644 --- a/drivers/net/can/mscan/mscan.c +++ b/drivers/net/can/mscan/mscan.c @@ -246,7 +246,7 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev) out_be16(&regs->tx.idr3_2, can_id);

can_id >>= 16; - /* EFF_FLAGS are inbetween the IDs :( */ + /* EFF_FLAGS are between the IDs :( */ can_id = (can_id & 0x7) | ((can_id << 2) & 0xffe0) | MSCAN_EFF_FLAGS; } else { diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 0a8de01..a358ea9 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -425,7 +425,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) cf->data[3] = ecc & ECC_SEG; break; } - /* Error occured during transmission? */ + /* Error occurred during transmission? */ if ((ecc & ECC_DIR) == 0) cf->data[2] |= CAN_ERR_PROT_TX; } diff --git a/drivers/net/can/softing/softing.h b/drivers/net/can/softing/softing.h index 7ec9f4d..afd7d85 100644 --- a/drivers/net/can/softing/softing.h +++ b/drivers/net/can/softing/softing.h @@ -22,7 +22,7 @@ struct softing_priv { struct softing *card; struct { int pending; - /* variables wich hold the circular buffer */ + /* variables which hold the circular buffer */ int echo_put; int echo_get; } tx; diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c index aeea9f9..7a70709 100644 --- a/drivers/net/can/softing/softing_main.c +++ b/drivers/net/can/softing/softing_main.c @@ -218,7 +218,7 @@ static int softing_handle_1(struct softing *card) ptr = buf; cmd = *ptr++; if (cmd == 0xff) - /* not quite usefull, probably the card has got out */ + /* not quite useful, probably the card has got out */ return 0; netdev = card->net[0]; if (cmd & CMD_BUS2) diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 4d07f1e..f7bbde9 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -663,7 +663,7 @@ static int ti_hecc_error(struct net_device *ndev, int int_status, struct can_frame *cf; struct sk_buff *skb;

- /* propogate the error condition to the can stack */ + /* propagate the error condition to the can stack */ skb = alloc_can_err_skb(ndev, &cf); if (!skb) { if (printk_ratelimit()) diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index e75f1a8..a72c7bf 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -386,7 +386,7 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg) break; }

- /* Error occured during transmission? */ + /* Error occurred during transmission? */ if ((ecc & SJA1000_ECC_DIR) == 0) cf->data[2] |= CAN_ERR_PROT_TX;

diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index dc53c83..eb8b0e6 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -284,7 +284,7 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv, break; }

- /* Error occured during transmission? */ + /* Error occurred during transmission? */ if (!(ecc & SJA1000_ECC_DIR)) cf->data[2] |= CAN_ERR_PROT_TX;

diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 3437613..143a28c 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -51,7 +51,7 @@ * TX has 4 queues. currently these queues are used in a round-robin * fashion for load balancing. They can also be used for QoS. for that * to work, however, QoS information needs to be exposed down to the driver - * level so that subqueues get targetted to particular transmit rings. + * level so that subqueues get targeted to particular transmit rings. * alternatively, the queues can be configured via use of the all-purpose * ioctl. * @@ -5165,7 +5165,7 @@ err_out_free_res: pci_release_regions(pdev);

err_write_cacheline: - /* Try to restore it in case the error occured after we + /* Try to restore it in case the error occurred after we * set it. */ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, orig_cacheline_size); diff --git a/drivers/net/cassini.h b/drivers/net/cassini.h index faf4746..b361424 100644 --- a/drivers/net/cassini.h +++ b/drivers/net/cassini.h @@ -772,7 +772,7 @@ #define RX_DEBUG_INTR_WRITE_PTR_MASK 0xC0000000 /* interrupt write pointer of the interrupt queue */

-/* flow control frames are emmitted using two PAUSE thresholds: +/* flow control frames are emitted using two PAUSE thresholds: * XOFF PAUSE uses pause time value pre-programmed in the Send PAUSE MAC reg * XON PAUSE uses a pause time of 0. granularity of threshold is 64bytes. * PAUSE thresholds defined in terms of FIFO occupancy and may be translated diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/chelsio/mv88e1xxx.c index 809047a..71018a4 100644 --- a/drivers/net/chelsio/mv88e1xxx.c +++ b/drivers/net/chelsio/mv88e1xxx.c @@ -41,7 +41,7 @@ static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval) * * PARAMS: cphy - Pointer to PHY instance data. * - * RETURN: 0 - Successfull reset. + * RETURN: 0 - Successful reset. * -1 - Timeout. */ static int mv88e1xxx_reset(struct cphy *cphy, int wait) diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c index 7dbb16d..40c7b93 100644 --- a/drivers/net/chelsio/pm3393.c +++ b/drivers/net/chelsio/pm3393.c @@ -293,7 +293,7 @@ static int pm3393_enable_port(struct cmac *cmac, int which) pm3393_enable(cmac, which);

/* - * XXX This should be done by the PHY and preferrably not at all. + * XXX This should be done by the PHY and preferably not at all. * The PHY doesn't give us link status indication on its own so have * the link management code query it instead. */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index f778b15..8754d44 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1662,7 +1662,7 @@ irqreturn_t t1_interrupt(int irq, void *data) * The code figures out how many entries the sk_buff will require in the * cmdQ and updates the cmdQ data structure with the state once the enqueue * has complete. Then, it doesn't access the global structure anymore, but - * uses the corresponding fields on the stack. In conjuction with a spinlock + * uses the corresponding fields on the stack. In conjunction with a spinlock * around that code, we can make the function reentrant without holding the * lock when we actually enqueue (which might be expensive, especially on * architectures with IO MMUs). diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/chelsio/vsc7326.c index 106a590..b0cb388 100644 --- a/drivers/net/chelsio/vsc7326.c +++ b/drivers/net/chelsio/vsc7326.c @@ -566,7 +566,7 @@ static int mac_disable(struct cmac *mac, int which) for (i = 0; i <= 0x3a; ++i) vsc_write(mac->adapter, CRA(4, port, i), 0);

- /* Clear sofware counters */ + /* Clear software counters */ memset(&mac->stats, 0, sizeof(struct cmac_statistics));

return 0; diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 80c2fee..9d267d3 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -1383,7 +1383,7 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) spin_lock(&np->lock); /* Preempt protection */ switch (cmd) { /* The ioctls below should be considered obsolete but are */ - /* still present for compatability with old scripts/apps */ + /* still present for compatibility with old scripts/apps */ case SET_ETH_SPEED_10: /* 10 Mbps */ e100_set_speed(dev, 10); break; diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index f9f6645..bfa2d56 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -199,7 +199,7 @@ static inline void refill_rspq(struct adapter *adapter, * need_skb_unmap - does the platform need unmapping of sk_buffs? * * Returns true if the platform needs sk_buff unmapping. The compiler - * optimizes away unecessary code if this returns true. + * optimizes away unnecessary code if this returns true. */ static inline int need_skb_unmap(void) { diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index d55db6b..c688421 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1386,11 +1386,11 @@ struct intr_info { * @reg: the interrupt status register to process * @mask: a mask to apply to the interrupt status * @acts: table of interrupt actions - * @stats: statistics counters tracking interrupt occurences + * @stats: statistics counters tracking interrupt occurrences * * A table driven interrupt handler that applies a set of masks to an * interrupt status word and performs the corresponding actions if the - * interrupts described by the mask have occured. The actions include + * interrupts described by the mask have occurred. The actions include * optionally printing a warning or alert message, and optionally * incrementing a stat counter. The table is terminated by an entry * specifying mask 0. Returns the number of fatal interrupt conditions. @@ -2783,7 +2783,7 @@ static void init_mtus(unsigned short mtus[]) { /* * See draft-mathis-plpmtud-00.txt for the values. The min is 88 so - * it can accomodate max size TCP/IP headers when SACK and timestamps + * it can accommodate max size TCP/IP headers when SACK and timestamps * are enabled and still have at least 8 bytes of payload. */ mtus[0] = 88; diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c index b9fd8a6..d1ec111 100644 --- a/drivers/net/cxgb4/t4_hw.c +++ b/drivers/net/cxgb4/t4_hw.c @@ -883,7 +883,7 @@ struct intr_info { * * A table driven interrupt handler that applies a set of masks to an * interrupt status word and performs the corresponding actions if the - * interrupts described by the mask have occured. The actions include + * interrupts described by the mask have occurred. The actions include * optionally emitting a warning or alert message. The table is terminated * by an entry specifying mask 0. Returns the number of fatal interrupt * conditions. diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c index 6aad64d..4661cbb 100644 --- a/drivers/net/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -2738,7 +2738,7 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, cfg_queues(adapter);

/* - * Print a short notice on the existance and configuration of the new + * Print a short notice on the existence and configuration of the new * VF network device ... */ for_each_port(adapter, pidx) { diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c index e0b3d1b..bb65121f 100644 --- a/drivers/net/cxgb4vf/sge.c +++ b/drivers/net/cxgb4vf/sge.c @@ -224,8 +224,8 @@ static inline bool is_buf_mapped(const struct rx_sw_desc *sdesc) /** * need_skb_unmap - does the platform need unmapping of sk_buffs? * - * Returns true if the platfrom needs sk_buff unmapping. The compiler - * optimizes away unecessary code if this returns true. + * Returns true if the platform needs sk_buff unmapping. The compiler + * optimizes away unnecessary code if this returns true. */ static inline int need_skb_unmap(void) { @@ -267,7 +267,7 @@ static inline unsigned int fl_cap(const struct sge_fl *fl) * * Tests specified Free List to see whether the number of buffers * available to the hardware has falled below our "starvation" - * threshhold. + * threshold. */ static inline bool fl_starving(const struct sge_fl *fl) { @@ -1149,7 +1149,7 @@ int t4vf_eth_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(credits < ETHTXQ_STOP_THRES)) { /* * After we're done injecting the Work Request for this - * packet, we'll be below our "stop threshhold" so stop the TX + * packet, we'll be below our "stop threshold" so stop the TX * Queue now and schedule a request for an SGE Egress Queue * Update message. The queue will get started later on when * the firmware processes this Work Request and sends us an diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index baca6bf..807b6bb 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -94,14 +94,14 @@ MODULE_VERSION(EMAC_MODULE_VERSION); static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";

/* Configuration items */ -#define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC upto frames */ +#define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC up to frames */ #define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */ #define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */ #define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */ #define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */ #define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */ -#define EMAC_DEF_PROM_EN (0) /* Promiscous disabled */ -#define EMAC_DEF_PROM_CH (0) /* Promiscous channel is 0 */ +#define EMAC_DEF_PROM_EN (0) /* Promiscuous disabled */ +#define EMAC_DEF_PROM_CH (0) /* Promiscuous channel is 0 */ #define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */ #define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */ #define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */ @@ -1013,7 +1013,7 @@ static void emac_rx_handler(void *token, int len, int status) return; }

- /* recycle on recieve error */ + /* recycle on receive error */ if (status < 0) { ndev->stats.rx_errors++; goto recycle; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index f4d0922..dd70738 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -160,7 +160,7 @@ static int e1000_get_settings(struct net_device *netdev, &adapter->link_duplex); ecmd->speed = adapter->link_speed;

- /* unfortunatly FULL_DUPLEX != DUPLEX_FULL + /* unfortunately FULL_DUPLEX != DUPLEX_FULL * and HALF_DUPLEX != DUPLEX_HALF */

if (adapter->link_duplex == FULL_DUPLEX) diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index c70b23d..5c9a840 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1026,7 +1026,7 @@ extern void __iomem *ce4100_gbe_mdio_base_virt;

#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ #define E1000_MDPHYA 0x0003C /* PHY address - RW */ -#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ #define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */

#define E1000_GCR 0x05B00 /* PCI-Ex Control */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index bfab140..477e066 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -205,7 +205,7 @@ static struct pci_driver e1000_driver = { .probe = e1000_probe, .remove = __devexit_p(e1000_remove), #ifdef CONFIG_PM - /* Power Managment Hooks */ + /* Power Management Hooks */ .suspend = e1000_suspend, .resume = e1000_resume, #endif diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index a39d4a4..506a0a0 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4886,7 +4886,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (skb->protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4;

- /* if count is 0 then mapping error has occured */ + /* if count is 0 then mapping error has occurred */ count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss); if (count) { e1000_tx_queue(adapter, tx_flags, count); diff --git a/drivers/net/enc28j60_hw.h b/drivers/net/enc28j60_hw.h index 1a0b209..25b41de 100644 --- a/drivers/net/enc28j60_hw.h +++ b/drivers/net/enc28j60_hw.h @@ -303,7 +303,7 @@ /* maximum ethernet frame length */ #define MAX_FRAMELEN 1518

-/* Prefered half duplex: LEDA: Link status LEDB: Rx/Tx activity */ +/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */ #define ENC28J60_LAMPS_MODE 0x3476

#endif diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c index fb717be..12d28e9 100644 --- a/drivers/net/eth16i.c +++ b/drivers/net/eth16i.c @@ -13,7 +13,7 @@ This driver supports following cards : - ICL EtherTeam 16i - ICL EtherTeam 32 EISA - (Uses true 32 bit transfers rather than 16i compability mode) + (Uses true 32 bit transfers rather than 16i compatibility mode)

Example Module usage: insmod eth16i.o io=0x2a0 mediatype=bnc diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index db0290f..a83dd31 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -542,7 +542,7 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id)

/* Figure out what triggered the interrupt... * The tricky bit here is that the interrupt source bits get - * set in INT_SOURCE for an event irregardless of whether that + * set in INT_SOURCE for an event regardless of whether that * event is masked or not. Thus, in order to figure out what * triggered the interrupt, we need to remove the sources * for all events that are currently masked. This behaviour diff --git a/drivers/net/fec.h b/drivers/net/fec.h index ace318d..8b2c6d7 100644 --- a/drivers/net/fec.h +++ b/drivers/net/fec.h @@ -97,11 +97,11 @@ struct bufdesc { * The following definitions courtesy of commproc.h, which where * Copyright (c) 1997 Dan Malek (dmalek@jlc.net). */ -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */ #define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ #define BD_SC_P ((ushort)0x0100) /* xmt preamble */ #define BD_SC_BR ((ushort)0x0020) /* Break received */ diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 7b92897..d5ab4da 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -440,7 +440,7 @@ union ring_type { #define NV_RX3_VLAN_TAG_PRESENT (1<<16) #define NV_RX3_VLAN_TAG_MASK (0x0000FFFF)

-/* Miscelaneous hardware related defines: */ +/* Miscellaneous hardware related defines: */ #define NV_PCI_REGSZ_VER1 0x270 #define NV_PCI_REGSZ_VER2 0x2d4 #define NV_PCI_REGSZ_VER3 0x604 @@ -1488,7 +1488,7 @@ static int phy_init(struct net_device *dev) } }

- /* some phys clear out pause advertisment on reset, set it back */ + /* some phys clear out pause advertisement on reset, set it back */ mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg);

/* restart auto negotiation, power down phy */ @@ -2535,7 +2535,7 @@ static void nv_tx_timeout(struct net_device *dev) else nv_tx_done_optimized(dev, np->tx_ring_size);

- /* save current HW postion */ + /* save current HW position */ if (np->tx_change_owner) put_tx.ex = np->tx_change_owner->first_tx_desc; else @@ -4053,7 +4053,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)

} else if (ecmd->autoneg == AUTONEG_DISABLE) { /* Note: autonegotiation disable, speed 1000 intentionally - * forbidden - noone should need that. */ + * forbidden - no one should need that. */

if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100) return -EINVAL; @@ -4103,7 +4103,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) adv |= ADVERTISE_100HALF; if (ecmd->advertising & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; - if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisments but disable tx pause */ + if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisements but disable tx pause */ adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; if (np->pause_flags & NV_PAUSEFRAME_TX_REQ) adv |= ADVERTISE_PAUSE_ASYM; @@ -4148,7 +4148,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) if (ecmd->speed == SPEED_100 && ecmd->duplex == DUPLEX_FULL) adv |= ADVERTISE_100FULL; np->pause_flags &= ~(NV_PAUSEFRAME_AUTONEG|NV_PAUSEFRAME_RX_ENABLE|NV_PAUSEFRAME_TX_ENABLE); - if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) {/* for rx we set both advertisments but disable tx pause */ + if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) {/* for rx we set both advertisements but disable tx pause */ adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; np->pause_flags |= NV_PAUSEFRAME_RX_ENABLE; } @@ -4449,7 +4449,7 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*

adv = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ); adv &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); - if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisments but disable tx pause */ + if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisements but disable tx pause */ adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; if (np->pause_flags & NV_PAUSEFRAME_TX_REQ) adv |= ADVERTISE_PAUSE_ASYM; diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index ec5d595..b2fe7ed 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -1043,7 +1043,7 @@ enum gfar_errata { };

/* Struct stolen almost completely (and shamelessly) from the FCC enet source - * (Ok, that's not so true anymore, but there is a family resemblence) + * (Ok, that's not so true anymore, but there is a family resemblance) * The GFAR buffer descriptors track the ring buffers. The rx_bd_base * and tx_bd_base always point to the currently available buffer. * The dirty_tx tracks the current buffer that is being sent by the diff --git a/drivers/net/hamradio/Makefile b/drivers/net/hamradio/Makefile index 9def867..1040960 100644 --- a/drivers/net/hamradio/Makefile +++ b/drivers/net/hamradio/Makefile @@ -3,7 +3,7 @@ # # # 19971130 Moved the amateur radio related network drivers from -# drivers/net/ to drivers/hamradio for easier maintainance. +# drivers/net/ to drivers/hamradio for easier maintenance. # Joerg Reuter DL1BKE jreuter@yaina.de # # 20000806 Rewritten to use lists instead of if-statements. diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index 7d9ced0..96a98d2 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -30,7 +30,7 @@ * 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration * 0.2 F6FBB 08.06.98 Added delay after FPGA programming * 0.3 F6FBB 29.07.98 Delayed PTT implementation for dupmode=2 - * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistance + * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistence * 0.5 F6FBB 01.08.98 Shared IRQs, /proc/net and network statistics * 0.6 F6FBB 25.08.98 Added 1200Bds format * 0.7 F6FBB 12.09.98 Added to the kernel configuration diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 8e2c460..8e10d2f 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -180,8 +180,8 @@ struct hp100_private {

u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */ u_long whatever_offset; /* Offset to bus/phys/dma address */ - int rxrcommit; /* # Rx PDLs commited to adapter */ - int txrcommit; /* # Tx PDLs commited to adapter */ + int rxrcommit; /* # Rx PDLs committed to adapter */ + int txrcommit; /* # Tx PDLs committed to adapter */ };

/* @@ -716,7 +716,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr, * implemented/tested only with the lassen chip anyway... */ if (lp->mode == 1) { /* busmaster */ dma_addr_t page_baddr; - /* Get physically continous memory for TX & RX PDLs */ + /* Get physically continuous memory for TX & RX PDLs */ /* Conversion to new PCI API : * Pages are always aligned and zeroed, no need to it ourself. * Doc says should be OK for EISA bus as well - Jean II */ @@ -1596,7 +1596,7 @@ drop:

/* clean_txring checks if packets have been sent by the card by reading * the TX_PDL register from the performance page and comparing it to the - * number of commited packets. It then frees the skb's of the packets that + * number of committed packets. It then frees the skb's of the packets that * obviously have been sent to the network. * * Needs the PERFORMANCE page selected. @@ -1617,7 +1617,7 @@ static void hp100_clean_txring(struct net_device *dev)

#ifdef HP100_DEBUG if (donecount > MAX_TX_PDL) - printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name); + printk("hp100: %s: Warning: More PDLs transmitted than committed to card???\n", dev->name); #endif

for (; 0 != donecount; donecount--) { @@ -1765,7 +1765,7 @@ drop: * Receive Function (Non-Busmaster mode) * Called when an "Receive Packet" interrupt occurs, i.e. the receive * packet counter is non-zero. - * For non-busmaster, this function does the whole work of transfering + * For non-busmaster, this function does the whole work of transferring * the packet to the host memory and then up to higher layers via skb * and netif_rx. */ @@ -1892,7 +1892,7 @@ static void hp100_rx_bm(struct net_device *dev) /* RX_PKT_CNT states how many PDLs are currently formatted and available to * the cards BM engine */ if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) { - printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n", + printk("hp100: %s: More packets received than committed? RX_PKT_CNT=0x%x, commit=0x%x\n", dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff, lp->rxrcommit); return; @@ -2256,7 +2256,7 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id) if (lp->mode != 1) /* non busmaster */ hp100_rx(dev); else if (!(val & HP100_RX_PDL_FILL_COMPL)) { - /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt? */ + /* Shouldn't happen - maybe we missed a RX_PDL_FILL Interrupt? */ hp100_rx_bm(dev); } } diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h index e6ca128..b60e96f 100644 --- a/drivers/net/hp100.h +++ b/drivers/net/hp100.h @@ -109,7 +109,7 @@ #define HP100_REG_MAC_CFG_2 0x0d /* RW: (8) Misc MAC functions */ #define HP100_REG_MAC_CFG_3 0x0e /* RW: (8) Misc MAC functions */ #define HP100_REG_MAC_CFG_4 0x0f /* R: (8) Misc MAC states */ -#define HP100_REG_DROPPED 0x10 /* R: (16),11:0 Pkts cant fit in mem */ +#define HP100_REG_DROPPED 0x10 /* R: (16),11:0 Pkts can't fit in mem */ #define HP100_REG_CRC 0x12 /* R: (8) Pkts with CRC */ #define HP100_REG_ABORT 0x13 /* R: (8) Aborted Tx pkts */ #define HP100_REG_TRAIN_REQUEST 0x14 /* RW: (16) Endnode MAC register. */ diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c index 8ead6a9..5f51bf7 100644 --- a/drivers/net/ibm_newemac/tah.c +++ b/drivers/net/ibm_newemac/tah.c @@ -60,7 +60,7 @@ void tah_reset(struct platform_device *ofdev) printk(KERN_ERR "%s: reset timeout\n", ofdev->dev.of_node->full_name);

- /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ + /* 10KB TAH TX FIFO accommodates the max MTU of 9000 */ out_be32(&p->mr, TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | TAH_MR_DIG); diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 94d9969..8ff68ae 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -53,7 +53,7 @@ History: still work with 2.0.x.... Jan 28th, 2000 in Linux 2.2.13, the version.h file mysteriously didn't get - included. Added a workaround for this. Futhermore, it now + included. Added a workaround for this. Furthermore, it now not only compiles as a modules ;-) Jan 30th, 2000 newer kernels automatically probe more than one board, so the @@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev) if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt) rcrval |= RCREG_AMC;

- /* promiscous mode ? */ + /* promiscuous mode ? */

if (dev->flags & IFF_PROMISC) rcrval |= RCREG_PRO; diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h index aa3ddbd..accd5ef 100644 --- a/drivers/net/ibmlana.h +++ b/drivers/net/ibmlana.h @@ -90,7 +90,7 @@ typedef struct { #define RCREG_ERR 0x8000 /* accept damaged and collided pkts */ #define RCREG_RNT 0x4000 /* accept packets that are < 64 */ #define RCREG_BRD 0x2000 /* accept broadcasts */ -#define RCREG_PRO 0x1000 /* promiscous mode */ +#define RCREG_PRO 0x1000 /* promiscuous mode */ #define RCREG_AMC 0x0800 /* accept all multicasts */ #define RCREG_LB_NONE 0x0000 /* no loopback */ #define RCREG_LB_MAC 0x0200 /* MAC loopback */ diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 90c5e01..ce8255f 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -181,7 +181,7 @@ s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add) * address and must override the actual permanent MAC address. If an * alternate MAC address is fopund it is saved in the hw struct and * prgrammed into RAR0 and the cuntion returns success, otherwise the - * fucntion returns an error. + * function returns an error. **/ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) { @@ -982,7 +982,7 @@ out: }

/** - * igb_get_speed_and_duplex_copper - Retreive current speed/duplex + * igb_get_speed_and_duplex_copper - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index 6694bf3..d639706 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -1421,7 +1421,7 @@ out: }

/** - * igb_check_downshift - Checks whether a downshift in speed occured + * igb_check_downshift - Checks whether a downshift in speed occurred * @hw: pointer to the HW structure * * Success returns 0, Failure returns 1 diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 3d850af..0dfd1b9 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -200,7 +200,7 @@ static struct pci_driver igb_driver = { .probe = igb_probe, .remove = __devexit_p(igb_remove), #ifdef CONFIG_PM - /* Power Managment Hooks */ + /* Power Management Hooks */ .suspend = igb_suspend, .resume = igb_resume, #endif @@ -2292,7 +2292,7 @@ static void igb_init_hw_timer(struct igb_adapter *adapter) /** * Scale the NIC clock cycle by a large factor so that * relatively small clock corrections can be added or - * substracted at each clock tick. The drawbacks of a large + * subtracted at each clock tick. The drawbacks of a large * factor are a) that the clock register overflows more quickly * (not such a big deal) and b) that the increment per tick has * to fit into 24 bits. As a result we need to use a shift of @@ -3409,7 +3409,7 @@ static void igb_set_rx_mode(struct net_device *netdev) } else { /* * Write addresses to the MTA, if the attempt fails - * then we should just turn on promiscous mode so + * then we should just turn on promiscuous mode so * that we can at least receive multicast traffic */ count = igb_write_mc_addr_list(netdev); @@ -3423,7 +3423,7 @@ static void igb_set_rx_mode(struct net_device *netdev) /* * Write addresses to available RAR registers, if there is not * sufficient space to store all the addresses then enable - * unicast promiscous mode + * unicast promiscuous mode */ count = igb_write_uc_addr_list(netdev); if (count < 0) { @@ -4317,7 +4317,7 @@ netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,

/* * count reflects descriptors mapped, if 0 or less then mapping error - * has occured and we need to rewind the descriptor queue + * has occurred and we need to rewind the descriptor queue */ count = igb_tx_map_adv(tx_ring, skb, first); if (!count) { @@ -5352,8 +5352,8 @@ static void igb_msg_task(struct igb_adapter *adapter) * The unicast table address is a register array of 32-bit registers. * The table is meant to be used in a way similar to how the MTA is used * however due to certain limitations in the hardware it is necessary to - * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous - * enable bit to allow vlan tag stripping when promiscous mode is enabled + * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous + * enable bit to allow vlan tag stripping when promiscuous mode is enabled **/ static void igb_set_uta(struct igb_adapter *adapter) { diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 6ccc32f..1d04ca6 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2227,7 +2227,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,

/* * count reflects descriptors mapped, if 0 then mapping error - * has occured and we need to rewind the descriptor queue + * has occurred and we need to rewind the descriptor queue */ count = igbvf_tx_map_adv(adapter, tx_ring, skb, first);

diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index a5b0f0e..58cd320 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -486,14 +486,14 @@ static int ipg_config_autoneg(struct net_device *dev) phyctrl = ipg_r8(PHY_CTRL); mac_ctrl_val = ipg_r32(MAC_CTRL);

- /* Set flags for use in resolving auto-negotation, assuming + /* Set flags for use in resolving auto-negotiation, assuming * non-1000Mbps, half duplex, no flow control. */ fullduplex = 0; txflowcontrol = 0; rxflowcontrol = 0;

- /* To accomodate a problem in 10Mbps operation, + /* To accommodate a problem in 10Mbps operation, * set a global flag if PHY running in 10Mbps mode. */ sp->tenmbpsmode = 0; @@ -846,7 +846,7 @@ static void init_tfdlist(struct net_device *dev) }

/* - * Free all transmit buffers which have already been transfered + * Free all transmit buffers which have already been transferred * via DMA to the IPG. */ static void ipg_nic_txfree(struct net_device *dev) @@ -920,7 +920,7 @@ static void ipg_tx_timeout(struct net_device *dev)

/* * For TxComplete interrupts, free all transmit - * buffers which have already been transfered via DMA + * buffers which have already been transferred via DMA * to the IPG. */ static void ipg_nic_txcleanup(struct net_device *dev) @@ -1141,13 +1141,13 @@ static int ipg_nic_rx_check_error(struct net_device *dev)

/* Increment detailed receive error statistics. */ if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) { - IPG_DEBUG_MSG("RX FIFO overrun occured.\n"); + IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");

sp->stats.rx_fifo_errors++; }

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) { - IPG_DEBUG_MSG("RX runt occured.\n"); + IPG_DEBUG_MSG("RX runt occurred.\n"); sp->stats.rx_length_errors++; }

@@ -1156,7 +1156,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev) */

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) { - IPG_DEBUG_MSG("RX alignment error occured.\n"); + IPG_DEBUG_MSG("RX alignment error occurred.\n"); sp->stats.rx_frame_errors++; }

@@ -1421,12 +1421,12 @@ static int ipg_nic_rx(struct net_device *dev)

/* Increment detailed receive error statistics. */ if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) { - IPG_DEBUG_MSG("RX FIFO overrun occured.\n"); + IPG_DEBUG_MSG("RX FIFO overrun occurred.\n"); sp->stats.rx_fifo_errors++; }

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) { - IPG_DEBUG_MSG("RX runt occured.\n"); + IPG_DEBUG_MSG("RX runt occurred.\n"); sp->stats.rx_length_errors++; }

@@ -1436,7 +1436,7 @@ static int ipg_nic_rx(struct net_device *dev) */

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) { - IPG_DEBUG_MSG("RX alignment error occured.\n"); + IPG_DEBUG_MSG("RX alignment error occurred.\n"); sp->stats.rx_frame_errors++; }

@@ -1460,7 +1460,7 @@ static int ipg_nic_rx(struct net_device *dev) } } else {

- /* Adjust the new buffer length to accomodate the size + /* Adjust the new buffer length to accommodate the size * of the received frame. */ skb_put(skb, framelen); @@ -1488,7 +1488,7 @@ static int ipg_nic_rx(struct net_device *dev) }

/* - * If there are more RFDs to proces and the allocated amount of RFD + * If there are more RFDs to process and the allocated amount of RFD * processing time has expired, assert Interrupt Requested to make * sure we come back to process the remaining RFDs. */ @@ -1886,7 +1886,7 @@ static netdev_tx_t ipg_nic_hard_start_xmit(struct sk_buff *skb, /* Request TxComplete interrupts at an interval defined * by the constant IPG_FRAMESBETWEENTXCOMPLETES. * Request TxComplete interrupt for every frame - * if in 10Mbps mode to accomodate problem with 10Mbps + * if in 10Mbps mode to accommodate problem with 10Mbps * processing. */ if (sp->tenmbpsmode) @@ -2098,7 +2098,7 @@ static int ipg_nic_change_mtu(struct net_device *dev, int new_mtu) struct ipg_nic_private *sp = netdev_priv(dev); int err;

- /* Function to accomodate changes to Maximum Transfer Unit + /* Function to accommodate changes to Maximum Transfer Unit * (or MTU) of IPG NIC. Cannot use default function since * the default will not allow for MTU > 1500 bytes. */ diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 92631eb..872183f 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -76,7 +76,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);

-/* These are the currently known ALi sourth-bridge chipsets, the only one difference +/* These are the currently known ALi south-bridge chipsets, the only one difference * is that M1543C doesn't support HP HDSL-3600 */ static ali_chip_t chips[] = @@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) outb(lcr, iobase+UART_LCR); /* Set 8N1 */ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */

- /* without this, the conection will be broken after come back from FIR speed, + /* without this, the connection will be broken after come back from FIR speed, but with this, the SIR connection is harder to established */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index f81d944..174cafa 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -56,7 +56,7 @@ /* do_probe module parameter Enable this code */ /* Probe code is very useful for understanding how the hardware works */ /* Use it with various combinations of TT_LEN, RX_LEN */ -/* Strongly recomended, disable if the probe fails on your machine */ +/* Strongly recommended, disable if the probe fails on your machine */ /* and send me james@fishsoup.dhs.org the output of dmesg */ #define USE_PROBE 1 #undef USE_PROBE diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 77fcf44..d92d54e 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -51,7 +51,7 @@

/* The documentation for this chip is allegedly released */ /* However I have not seen it, not have I managed to contact */ -/* anyone who has. HOWEVER the chip bears a striking resemblence */ +/* anyone who has. HOWEVER the chip bears a striking resemblance */ /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ /* the documentation for this is freely available at */ /* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c index a31b8fa..96cdecf 100644 --- a/drivers/net/irda/girbil-sir.c +++ b/drivers/net/irda/girbil-sir.c @@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed); /* Control register 1 */ #define GIRBIL_TXEN 0x01 /* Enable transmitter */ #define GIRBIL_RXEN 0x02 /* Enable receiver */ -#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */ +#define GIRBIL_ECAN 0x04 /* Cancel self emitted data */ #define GIRBIL_ECHO 0x08 /* Echo control characters */

/* LED Current Register (0x2) */ diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index e4ea619..d9267cb 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb) /* urb is now available */ //urb->status = 0; -> tested above

- /* New speed and xbof is now commited in hardware */ + /* New speed and xbof is now committed in hardware */ self->new_speed = -1; self->new_xbofs = -1;

@@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb) IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__); irda_usb_change_speed_xbofs(self); } else { - /* New speed and xbof is now commited in hardware */ + /* New speed and xbof is now committed in hardware */ self->new_speed = -1; self->new_xbofs = -1; /* Done, waiting for next packet */ diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c index cc821de..be52bfe 100644 --- a/drivers/net/irda/mcs7780.c +++ b/drivers/net/irda/mcs7780.c @@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)

mcs_get_reg(mcs, MCS_MODE_REG, &rval);

- /* MINRXPW values recomended by MosChip */ + /* MINRXPW values recommended by MosChip */ if (mcs->new_speed <= 115200) { rval &= ~MCS_FIR;

@@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb) ret = usb_submit_urb(urb, GFP_ATOMIC); }

-/* Transmit callback funtion. */ +/* Transmit callback function. */ static void mcs_send_irq(struct urb *urb) { struct mcs_cb *mcs = urb->context; @@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb) netif_wake_queue(ndev); }

-/* Transmit callback funtion. */ +/* Transmit callback function. */ static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev) { diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index 559fe85..7a963d4 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info) int reg, com = 0; int pnp;

- /* Read funtion enable register (FER) */ + /* Read function enable register (FER) */ outb(CFG_338_FER, cfg_base); reg = inb(cfg_base+1);

diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h index 7ba7738..32fa582 100644 --- a/drivers/net/irda/nsc-ircc.h +++ b/drivers/net/irda/nsc-ircc.h @@ -135,7 +135,7 @@ #define LSR_TXRDY 0x20 /* Transmitter ready */ #define LSR_TXEMP 0x40 /* Transmitter empty */

-#define ASCR 0x07 /* Auxillary Status and Control Register */ +#define ASCR 0x07 /* Auxiliary Status and Control Register */ #define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */ #define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */ #define ASCR_S_EOT 0x04 /* Set end of transmission */ diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index c192c31..001ed0a 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -40,7 +40,7 @@

#define ICCR0_AME (1 << 7) /* Address match enable */ #define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ -#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ +#define ICCR0_RIE (1 << 5) /* Receive FIFO interrupt enable */ #define ICCR0_RXE (1 << 4) /* Receive enable */ #define ICCR0_TXE (1 << 3) /* Transmit enable */ #define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ @@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id) }

if (icsr0 & ICSR0_EIF) { - /* An error in FIFO occured, or there is a end of frame */ + /* An error in FIFO occurred, or there is a end of frame */ pxa_irda_fir_irq_eif(si, dev, icsr0); }

diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 1c1677c..8800e1f 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) int iobase; int iir, lsr;

- /* Already locked comming here in smsc_ircc_interrupt() */ + /* Already locked coming here in smsc_ircc_interrupt() */ /*spin_lock(&self->lock);*/

iobase = self->io.sir_base; diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 67c0ad4..fc89685 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177.

2004-02-16: sda@bdit.de - Removed unneeded 'legacy' pci stuff. -- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff. +- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff. - On speed change from core, don't send SIR frame with new speed. Use current speed and change speeds later. - Make module-param dongle_id actually work. @@ -385,7 +385,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) self->io.dongle_id = dongle_id;

/* The only value we must override it the baudrate */ - /* Maximum speeds and capabilities are dongle-dependant. */ + /* Maximum speeds and capabilities are dongle-dependent. */ switch( self->io.dongle_id ){ case 0x0d: self->qos.baud_rate.bits = diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h index d66fab8..a076eb1 100644 --- a/drivers/net/irda/vlsi_ir.h +++ b/drivers/net/irda/vlsi_ir.h @@ -209,7 +209,7 @@ enum vlsi_pio_irintr { IRINTR_ACTEN = 0x80, /* activity interrupt enable */ IRINTR_ACTIVITY = 0x40, /* activity monitor (traffic detected) */ IRINTR_RPKTEN = 0x20, /* receive packet interrupt enable*/ - IRINTR_RPKTINT = 0x10, /* rx-packet transfered from fifo to memory finished */ + IRINTR_RPKTINT = 0x10, /* rx-packet transferred from fifo to memory finished */ IRINTR_TPKTEN = 0x08, /* transmit packet interrupt enable */ IRINTR_TPKTINT = 0x04, /* last bit of tx-packet+crc shifted to ir-pulser */ IRINTR_OE_EN = 0x02, /* UART rx fifo overrun error interrupt enable */ @@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev { /* the remapped error flags we use for returning from frame * post-processing in vlsi_process_tx/rx() after it was completed * by the hardware. These functions either return the >=0 number - * of transfered bytes in case of success or the negative (-) + * of transferred bytes in case of success or the negative (-) * of the or'ed error flags. */

diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c index 41c529f..686a17a 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.c +++ b/drivers/net/ixgbe/ixgbe_dcb.c @@ -36,7 +36,7 @@ /** * ixgbe_ieee_credits - This calculates the ieee traffic class * credits from the configured bandwidth percentages. Credits - * are the smallest unit programable into the underlying + * are the smallest unit programmable into the underlying * hardware. The IEEE 802.1Qaz specification do not use bandwidth * groups so this is much simplified from the CEE case. */ diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index fec4c72..327c861 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -360,7 +360,7 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) return DCB_NO_HW_CHG;

/* - * Only take down the adapter if an app change occured. FCoE + * Only take down the adapter if an app change occurred. FCoE * may shuffle tx rings in this case and this can not be done * without a reset currently. */ @@ -599,7 +599,7 @@ static u8 ixgbe_dcbnl_setapp(struct net_device *netdev, break;

/* The FCoE application priority may be changed multiple - * times in quick sucession with switches that build up + * times in quick succession with switches that build up * TLVs. To avoid creating uneeded device resets this * checks the actual HW configuration and clears * BIT_APP_UPCHG if a HW configuration change is not diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index f17e4a7..6f8adc7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -644,7 +644,7 @@ void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring, * @adapter: driver private struct * @index: reg idx of queue to query (0-127) * - * Helper function to determine the traffic index for a paticular + * Helper function to determine the traffic index for a particular * register index. * * Returns : a tc index for use in range 0-7, or 0-3 @@ -3556,7 +3556,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev) } else { /* * Write addresses to the MTA, if the attempt fails - * then we should just turn on promiscous mode so + * then we should just turn on promiscuous mode so * that we can at least receive multicast traffic */ hw->mac.ops.update_mc_addr_list(hw, netdev); @@ -3567,7 +3567,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev) /* * Write addresses to available RAR registers, if there is not * sufficient space to store all the addresses then enable - * unicast promiscous mode + * unicast promiscuous mode */ count = ixgbe_write_uc_addr_list(netdev); if (count < 0) { @@ -4443,7 +4443,7 @@ static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter) }

/* - * ixgbe_set_num_queues: Allocate queues for device, feature dependant + * ixgbe_set_num_queues: Allocate queues for device, feature dependent * @adapter: board private structure to initialize * * This is the top level queue allocation routine. The order here is very diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index f72f705..df5b8aa 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -1694,7 +1694,7 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) }

/** - * ixgbe_tn_check_overtemp - Checks if an overtemp occured. + * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. * @hw: pointer to hardware structure * * Checks if the LASI temp alarm status was triggered due to overtemp diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c index f47e93f..d9323c0 100644 --- a/drivers/net/ixgbe/ixgbe_x540.c +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -573,7 +573,7 @@ static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) * @hw: pointer to hardware structure * @mask: Mask to specify which semaphore to release * - * Releases the SWFW semaphore throught the SW_FW_SYNC register + * Releases the SWFW semaphore through the SW_FW_SYNC register * for the specified function (CSR, PHY0, PHY1, EVM, Flash) **/ static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c index 054ab05..05fa7c8 100644 --- a/drivers/net/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ixgbevf/ixgbevf_main.c @@ -1925,7 +1925,7 @@ static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter, }

/* - * ixgbevf_set_num_queues: Allocate queues for device, feature dependant + * ixgbevf_set_num_queues: Allocate queues for device, feature dependent * @adapter: board private structure to initialize * * This is the top level queue allocation routine. The order here is very diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c index efd44af..f0d8346 100644 --- a/drivers/net/ks8842.c +++ b/drivers/net/ks8842.c @@ -321,7 +321,7 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter) /* RX 2 kb high watermark */ ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);

- /* aggresive back off in half duplex */ + /* aggressive back off in half duplex */ ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);

/* enable no excessive collison drop */ diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 0fa4a98..bcd9ba6 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -141,7 +141,7 @@ static int msg_enable; * * All these calls issue SPI transactions to access the chip's registers. They * all require that the necessary lock is held to prevent accesses when the - * chip is busy transfering packet data (RX/TX FIFO accesses). + * chip is busy transferring packet data (RX/TX FIFO accesses). */

/** @@ -483,7 +483,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) * * This form of operation would require us to hold the SPI bus' * chipselect low during the entie transaction to avoid any - * reset to the data stream comming from the chip. + * reset to the data stream coming from the chip. */

for (; rxfc != 0; rxfc--) { @@ -634,7 +634,7 @@ static void ks8851_irq_work(struct work_struct *work)

/** * calc_txlen - calculate size of message to send packet - * @len: Lenght of data + * @len: Length of data * * Returns the size of the TXFIFO message needed to send * this packet. @@ -1472,7 +1472,7 @@ static int ks8851_phy_reg(int reg) * @reg: The register to read. * * This call reads data from the PHY register specified in @reg. Since the - * device does not support all the MII registers, the non-existant values + * device does not support all the MII registers, the non-existent values * are always returned as zero. * * We return zero for unsupported registers as the MII code does not check diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index 2e2c69b..61631ca 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -470,7 +470,7 @@ static int msg_enable; * * All these calls issue transactions to access the chip's registers. They * all require that the necessary lock is held to prevent accesses when the - * chip is busy transfering packet data (RX/TX FIFO accesses). + * chip is busy transferring packet data (RX/TX FIFO accesses). */

/** @@ -1364,7 +1364,7 @@ static int ks_phy_reg(int reg) * @reg: The register to read. * * This call reads data from the PHY register specified in @reg. Since the - * device does not support all the MII registers, the non-existant values + * device does not support all the MII registers, the non-existent values * are always returned as zero. * * We return zero for unsupported registers as the MII code does not check diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c index da74db4..17b75e5 100644 --- a/drivers/net/lib8390.c +++ b/drivers/net/lib8390.c @@ -35,7 +35,7 @@ Alexey Kuznetsov : use the 8390's six bit hash multicast filter. Paul Gortmaker : tweak ANK's above multicast changes a bit. Paul Gortmaker : update packet statistics for v2.1.x - Alan Cox : support arbitary stupid port mappings on the + Alan Cox : support arbitrary stupid port mappings on the 68K Macintosh. Support >16bit I/O spaces Paul Gortmaker : add kmod support for auto-loading of the 8390 module by all drivers that require it. @@ -121,7 +121,7 @@ static void __NS8390_init(struct net_device *dev, int startp); /* * SMP and the 8390 setup. * - * The 8390 isnt exactly designed to be multithreaded on RX/TX. There is + * The 8390 isn't exactly designed to be multithreaded on RX/TX. There is * a page register that controls bank and packet buffer access. We guard * this with ei_local->page_lock. Nobody should assume or set the page other * than zero when the lock is not held. Lock holders must restore page 0 diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c index 3698824..385a953 100644 --- a/drivers/net/lp486e.c +++ b/drivers/net/lp486e.c @@ -27,7 +27,7 @@

Credits: Thanks to Murphy Software BV for letting me write this in their time. - Well, actually, I get payed doing this... + Well, actually, I get paid doing this... (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for more information on the Professional Workstation)

diff --git a/drivers/net/meth.h b/drivers/net/meth.h index a78dc1c..5b145c6 100644 --- a/drivers/net/meth.h +++ b/drivers/net/meth.h @@ -144,7 +144,7 @@ typedef struct rx_packet { /* Bits 22 through 28 are used to determine IPGR2 */

#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */ - /* 000: Inital revision */ + /* 000: Initial revision */ /* 001: First revision, Improved TX concatenation */

@@ -193,7 +193,7 @@ typedef struct rx_packet { /* 1: A TX message had the INT request bit set, the packet has been sent. */ #define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */ #define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */ - /* 1: A memory error occurred durring DMA, DMA stopped, Fatal */ + /* 1: A memory error occurred during DMA, DMA stopped, Fatal */ #define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */ #define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */ #define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */ diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c index 9317b61..9276b1b2 100644 --- a/drivers/net/mlx4/en_main.c +++ b/drivers/net/mlx4/en_main.c @@ -236,7 +236,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev) goto err_mr; }

- /* Configure wich ports to start according to module parameters */ + /* Configure which ports to start according to module parameters */ mdev->port_cnt = 0; mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) mdev->port_cnt++; diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 4f158ba..77063f9 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -247,7 +247,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) priv->port); if (err) en_err(priv, "Failed enabling " - "promiscous mode\n"); + "promiscuous mode\n");

/* Disable port multicast filter (unconditionally) */ err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, @@ -276,7 +276,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) }

/* - * Not in promiscous mode + * Not in promiscuous mode */

if (priv->flags & MLX4_EN_FLAG_PROMISC) { @@ -292,14 +292,14 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) err = mlx4_unicast_promisc_remove(mdev->dev, priv->base_qpn, priv->port); if (err) - en_err(priv, "Failed disabling promiscous mode\n"); + en_err(priv, "Failed disabling promiscuous mode\n");

/* Disable Multicast promisc */ if (priv->flags & MLX4_EN_FLAG_MC_PROMISC) { err = mlx4_multicast_promisc_remove(mdev->dev, priv->base_qpn, priv->port); if (err) - en_err(priv, "Failed disabling multicast promiscous mode\n"); + en_err(priv, "Failed disabling multicast promiscuous mode\n"); priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC; }

@@ -331,7 +331,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) err = mlx4_multicast_promisc_remove(mdev->dev, priv->base_qpn, priv->port); if (err) - en_err(priv, "Failed disabling multicast promiscous mode\n"); + en_err(priv, "Failed disabling multicast promiscuous mode\n"); priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC; }

diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 05998ee..cfd50bc 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -706,7 +706,7 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget) }

-/* Calculate the last offset position that accomodates a full fragment +/* Calculate the last offset position that accommodates a full fragment * (assuming fagment size = stride-align) */ static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16 align) { diff --git a/drivers/net/mlx4/en_selftest.c b/drivers/net/mlx4/en_selftest.c index 9c91a92..191a8dc 100644 --- a/drivers/net/mlx4/en_selftest.c +++ b/drivers/net/mlx4/en_selftest.c @@ -149,7 +149,7 @@ void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)

netif_carrier_off(dev); retry_tx: - /* Wait untill all tx queues are empty. + /* Wait until all tx queues are empty. * there should not be any additional incoming traffic * since we turned the carrier off */ msleep(200); diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 01feb8f..b229acf 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -636,7 +636,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(!real_size)) goto tx_drop;

- /* Allign descriptor to TXBB size */ + /* Align descriptor to TXBB size */ desc_size = ALIGN(real_size, TXBB_SIZE); nr_txbb = desc_size / TXBB_SIZE; if (unlikely(nr_txbb > MAX_DESC_TXBBS)) { diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c index e71372a..279521a 100644 --- a/drivers/net/mlx4/mcg.c +++ b/drivers/net/mlx4/mcg.c @@ -222,7 +222,7 @@ static int existing_steering_entry(struct mlx4_dev *dev, u8 vep_num, u8 port,

/* the given qpn is listed as a promisc qpn * we need to add it as a duplicate to this entry - * for future refernce */ + * for future references */ list_for_each_entry(dqp, &entry->duplicates, list) { if (qpn == dqp->qpn) return 0; /* qp is already duplicated */ diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index eca7d85..8856659 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -172,7 +172,7 @@ int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn, u8 wrap) }

if (mac == (MLX4_MAC_MASK & be64_to_cpu(table->entries[i]))) { - /* MAC already registered, increase refernce count */ + /* MAC already registered, increase references count */ ++table->refs[i]; goto out; } @@ -360,7 +360,7 @@ int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index) if (table->refs[i] && (vlan == (MLX4_VLAN_MASK & be32_to_cpu(table->entries[i])))) { - /* Vlan already registered, increase refernce count */ + /* Vlan already registered, increase references count */ *index = i; ++table->refs[i]; goto out; diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 673dc60..1446de5 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -3702,7 +3702,7 @@ abort:

/* * This function determines the number of slices supported. - * The number slices is the minumum of the number of CPUS, + * The number slices is the minimum of the number of CPUS, * the number of MSI-X irqs supported, the number of slices * supported by the firmware */ diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c index a761076..53aeea4 100644 --- a/drivers/net/myri_sbus.c +++ b/drivers/net/myri_sbus.c @@ -1009,7 +1009,7 @@ static int __devinit myri_sbus_probe(struct platform_device *op)

/* Map in the MyriCOM register/localram set. */ if (mp->eeprom.cpuvers < CPUVERS_4_0) { - /* XXX Makes no sense, if control reg is non-existant this + /* XXX Makes no sense, if control reg is non-existent this * XXX driver cannot function at all... maybe pre-4.0 is * XXX only a valid version for PCI cards? Ask feldy... */ diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 2fd3963..aa2813e 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -203,7 +203,7 @@ skbuff at an offset of "+2", 16-byte aligning the IP header. IIId. Synchronization

Most operations are synchronized on the np->lock irq spinlock, except the -recieve and transmit paths which are synchronised using a combination of +receive and transmit paths which are synchronised using a combination of hardware descriptor ownership, disabling interrupts and NAPI poll scheduling.

IVb. References @@ -726,7 +726,7 @@ static void move_int_phy(struct net_device *dev, int addr) * There are two addresses we must avoid: * - the address on the external phy that is used for transmission. * - the address that we want to access. User space can access phys - * on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independant from the + * on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the * phy that is used for transmission. */

@@ -1982,7 +1982,7 @@ static void init_ring(struct net_device *dev)

np->rx_head_desc = &np->rx_ring[0];

- /* Please be carefull before changing this loop - at least gcc-2.95.1 + /* Please be careful before changing this loop - at least gcc-2.95.1 * miscompiles it otherwise. */ /* Initialize all Rx descriptors. */ diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index d8bd73d..dc1967c 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -780,7 +780,7 @@ enum {

/* * capabilities register, can be used to selectively enable/disable features - * for backward compability + * for backward compatibility */ #define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8) #define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270) diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index a41b2cf..6667e06 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -512,7 +512,7 @@ static void ns83820_vlan_rx_register(struct net_device *ndev, struct vlan_group /* Packet Receiver * * The hardware supports linked lists of receive descriptors for - * which ownership is transfered back and forth by means of an + * which ownership is transferred back and forth by means of an * ownership bit. While the hardware does support the use of a * ring for receive descriptors, we only make use of a chain in * an attempt to reduce bus traffic under heavy load scenarios. @@ -1147,7 +1147,7 @@ again: #ifdef NS83820_VLAN_ACCEL_SUPPORT if(vlan_tx_tag_present(skb)) { /* fetch the vlan tag info out of the - * ancilliary data if the vlan code + * ancillary data if the vlan code * is using hw vlan acceleration */ short tag = vlan_tx_tag_get(skb); diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h index e1e33c8..bf126e7 100644 --- a/drivers/net/pch_gbe/pch_gbe.h +++ b/drivers/net/pch_gbe/pch_gbe.h @@ -351,7 +351,7 @@ struct pch_gbe_functions { };

/** - * struct pch_gbe_mac_info - MAC infomation + * struct pch_gbe_mac_info - MAC information * @addr[6]: Store the MAC address * @fc: Mode of flow control * @fc_autoneg: Auto negotiation enable for flow control setting @@ -375,7 +375,7 @@ struct pch_gbe_mac_info { };

/** - * struct pch_gbe_phy_info - PHY infomation + * struct pch_gbe_phy_info - PHY information * @addr: PHY address * @id: PHY's identifier * @revision: PHY's revision @@ -393,7 +393,7 @@ struct pch_gbe_phy_info { /*! * @ingroup Gigabit Ether driver Layer * @struct pch_gbe_bus_info - * @brief Bus infomation + * @brief Bus information */ struct pch_gbe_bus_info { u8 type; @@ -404,7 +404,7 @@ struct pch_gbe_bus_info { /*! * @ingroup Gigabit Ether driver Layer * @struct pch_gbe_hw - * @brief Hardware infomation + * @brief Hardware information */ struct pch_gbe_hw { void *back; @@ -462,7 +462,7 @@ struct pch_gbe_tx_desc {

/** - * struct pch_gbe_buffer - Buffer infomation + * struct pch_gbe_buffer - Buffer information * @skb: pointer to a socket buffer * @dma: DMA address * @time_stamp: time stamp @@ -477,7 +477,7 @@ struct pch_gbe_buffer { };

/** - * struct pch_gbe_tx_ring - tx ring infomation + * struct pch_gbe_tx_ring - tx ring information * @tx_lock: spinlock structs * @desc: pointer to the descriptor ring memory * @dma: physical address of the descriptor ring @@ -499,7 +499,7 @@ struct pch_gbe_tx_ring { };

/** - * struct pch_gbe_rx_ring - rx ring infomation + * struct pch_gbe_rx_ring - rx ring information * @desc: pointer to the descriptor ring memory * @dma: physical address of the descriptor ring * @size: length of descriptor ring in bytes diff --git a/drivers/net/pch_gbe/pch_gbe_ethtool.c b/drivers/net/pch_gbe/pch_gbe_ethtool.c index c8c873b..d2174a4 100644 --- a/drivers/net/pch_gbe/pch_gbe_ethtool.c +++ b/drivers/net/pch_gbe/pch_gbe_ethtool.c @@ -21,7 +21,7 @@ #include "pch_gbe_api.h"

/** - * pch_gbe_stats - Stats item infomation + * pch_gbe_stats - Stats item information */ struct pch_gbe_stats { char string[ETH_GSTRING_LEN]; diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index 5098684..2ef2f9c 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -1011,7 +1011,7 @@ static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter, tmp_skb->len = skb->len; memcpy(&tmp_skb->data[ETH_HLEN + 2], &skb->data[ETH_HLEN], (skb->len - ETH_HLEN)); - /*-- Set Buffer infomation --*/ + /*-- Set Buffer information --*/ buffer_info->length = tmp_skb->len; buffer_info->dma = dma_map_single(&adapter->pdev->dev, tmp_skb->data, buffer_info->length, @@ -1540,7 +1540,7 @@ int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter, size = (int)sizeof(struct pch_gbe_buffer) * tx_ring->count; tx_ring->buffer_info = vzalloc(size); if (!tx_ring->buffer_info) { - pr_err("Unable to allocate memory for the buffer infomation\n"); + pr_err("Unable to allocate memory for the buffer information\n"); return -ENOMEM; }

diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 1766dc4..c0f2337 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -214,7 +214,7 @@ static struct { { "SMC1211TX EZCard 10/100 (RealTek RTL8139)" }, /* { MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/ { "Delta Electronics 8139 10/100BaseTX" }, - { "Addtron Technolgy 8139 10/100BaseTX" }, + { "Addtron Technology 8139 10/100BaseTX" }, };

diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 321b12f..81ac330 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -950,7 +950,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev) }

/* Update statistics. - Suprisingly this need not be run single-threaded, but it effectively is. + Surprisingly this need not be run single-threaded, but it effectively is. The counters clear when read, so the adds must merely be atomic. */ static void update_stats(struct net_device *dev) diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index d3cb772..3077d72 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -780,7 +780,7 @@ module_exit(exit_axnet_cs); Alexey Kuznetsov : use the 8390's six bit hash multicast filter. Paul Gortmaker : tweak ANK's above multicast changes a bit. Paul Gortmaker : update packet statistics for v2.1.x - Alan Cox : support arbitary stupid port mappings on the + Alan Cox : support arbitrary stupid port mappings on the 68K Macintosh. Support >16bit I/O spaces Paul Gortmaker : add kmod support for auto-loading of the 8390 module by all drivers that require it. @@ -842,7 +842,7 @@ static void do_set_multicast_list(struct net_device *dev); /* * SMP and the 8390 setup. * - * The 8390 isnt exactly designed to be multithreaded on RX/TX. There is + * The 8390 isn't exactly designed to be multithreaded on RX/TX. There is * a page register that controls bank and packet buffer access. We guard * this with ei_local->page_lock. Nobody should assume or set the page other * than zero when the lock is not held. Lock holders must restore page 0 diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 8a9ff53..1085917 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -1264,7 +1264,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,

/*======================================================================

- Handle a Tx anomolous event. Entered while in Window 2. + Handle a Tx anomalous event. Entered while in Window 2.

======================================================================*/

diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index aee3bb0..7680376 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -1651,7 +1651,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* * On selected chips turn on the BCR18:NOUFLO bit. This stops transmit * starting until the packet is loaded. Strike one for reliability, lose - * one for latency - although on PCI this isnt a big loss. Older chips + * one for latency - although on PCI this isn't a big loss. Older chips * have FIFO's smaller than a packet, so you can't do this. * Turn on BCR18:BurstRdEn and BCR18:BurstWrEn. */ diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 993c52c..ff61293 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -534,7 +534,7 @@ EXPORT_SYMBOL(phy_detach); /* Generic PHY support and helper functions */

/** - * genphy_config_advert - sanitize and advertise auto-negotation parameters + * genphy_config_advert - sanitize and advertise auto-negotiation parameters * @phydev: target phy_device struct * * Description: Writes MII_ADVERTISE with the appropriate values, @@ -683,7 +683,7 @@ int genphy_config_aneg(struct phy_device *phydev) return result;

if (result == 0) { - /* Advertisment hasn't changed, but maybe aneg was never on to + /* Advertisement hasn't changed, but maybe aneg was never on to * begin with? Or maybe phy was isolated? */ int ctl = phy_read(phydev, MII_BMCR);

diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 9f6d670..4609bc0 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1448,7 +1448,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)

/* *check if we are on the last channel or - *we exceded the lenght of the data to + *we exceded the length of the data to *fragment */ if ((nfree <= 0) || (flen > len)) diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index 4e6b72f..2573f52 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -178,7 +178,7 @@ ppp_print_buffer (const char *name, const __u8 *buf, int count) * way to fix this is to use a rwlock in the tty struct, but for now * we use a single global rwlock for all ttys in ppp line discipline. * - * FIXME: Fixed in tty_io nowdays. + * FIXME: Fixed in tty_io nowadays. */ static DEFINE_RWLOCK(disc_data_lock);

diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 78c0e3c..693aaef 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -115,7 +115,7 @@ struct pppoe_net { * 2) Session stage (MAC and SID are known) * * Ethernet frames have a special tag for this but - * we use simplier approach based on session id + * we use simpler approach based on session id */ static inline bool stage_session(__be16 sid) { diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index 5ecfa4b..ffdf734 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -632,7 +632,7 @@ static inline void gelic_card_enable_rxdmac(struct gelic_card *card) * @card: card structure * * gelic_card_disable_rxdmac terminates processing on the DMA controller by - * turing off DMA and issueing a force end + * turing off DMA and issuing a force end */ static inline void gelic_card_disable_rxdmac(struct gelic_card *card) { @@ -650,7 +650,7 @@ static inline void gelic_card_disable_rxdmac(struct gelic_card *card) * @card: card structure * * gelic_card_disable_txdmac terminates processing on the DMA controller by - * turing off DMA and issueing a force end + * turing off DMA and issuing a force end */ static inline void gelic_card_disable_txdmac(struct gelic_card *card) { diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h index 32521ae..fadadf9 100644 --- a/drivers/net/ps3_gelic_net.h +++ b/drivers/net/ps3_gelic_net.h @@ -117,7 +117,7 @@ enum gelic_descr_rx_error { GELIC_DESCR_RXDATAERR = 0x00020000, /* IP packet format error */ GELIC_DESCR_RXCALERR = 0x00010000, /* cariier extension length * error */ - GELIC_DESCR_RXCREXERR = 0x00008000, /* carrier extention error */ + GELIC_DESCR_RXCREXERR = 0x00008000, /* carrier extension error */ GELIC_DESCR_RXMLTCST = 0x00004000, /* multicast address frame */ /* bit 13..0 reserved */ }; diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 4a624a2..b5ae29d 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -814,7 +814,7 @@ static int gelic_wl_set_auth(struct net_device *netdev, * you will not decide suitable cipher from * its beacon. * You should have knowledge about the AP's - * cipher infomation in other method prior to + * cipher information in other method prior to * the association. */ if (!precise_ie()) diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c index 1b63c8a..89f7540 100644 --- a/drivers/net/pxa168_eth.c +++ b/drivers/net/pxa168_eth.c @@ -462,7 +462,7 @@ static u32 hash_function(unsigned char *mac_addr_orig) * pep - ETHERNET . * mac_addr - MAC address. * skip - if 1, skip this address.Used in case of deleting an entry which is a - * part of chain in the hash table.We cant just delete the entry since + * part of chain in the hash table.We can't just delete the entry since * that will break the chain.We need to defragment the tables time to * time. * rd - 0 Discard packet upon match. diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h index 3362a66..73e2343 100644 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -770,7 +770,7 @@ enum { FM93C56A_WDS = 0x0, FM93C56A_ERASE = 0x3, FM93C56A_ERASE_ALL = 0x0, -/* Command Extentions */ +/* Command Extensions */ FM93C56A_WEN_EXT = 0x3, FM93C56A_WRITE_ALL_EXT = 0x1, FM93C56A_WDS_EXT = 0x0, diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 49bfa58..5bb3119 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -660,7 +660,7 @@ static void ql_disable_interrupts(struct ql_adapter *qdev) /* If we're running with multiple MSI-X vectors then we enable on the fly. * Otherwise, we may have multiple outstanding workers and don't want to * enable until the last one finishes. In this case, the irq_cnt gets - * incremented everytime we queue a worker and decremented everytime + * incremented every time we queue a worker and decremented every time * a worker finishes. Once it hits zero we enable the interrupt. */ u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr) @@ -3299,7 +3299,7 @@ msi: * will service it. An example would be if there are * 2 vectors (so 2 RSS rings) and 8 TX completion rings. * This would mean that vector 0 would service RSS ring 0 - * and TX competion rings 0,1,2 and 3. Vector 1 would + * and TX completion rings 0,1,2 and 3. Vector 1 would * service RSS ring 1 and TX completion rings 4,5,6 and 7. */ static void ql_set_tx_vect(struct ql_adapter *qdev) @@ -4152,7 +4152,7 @@ static int ql_change_rx_buffers(struct ql_adapter *qdev) int i, status; u32 lbq_buf_len;

- /* Wait for an oustanding reset to complete. */ + /* Wait for an outstanding reset to complete. */ if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) { int i = 3; while (i-- && !test_bit(QL_ADAPTER_UP, &qdev->flags)) { @@ -4281,7 +4281,7 @@ static void qlge_set_multicast_list(struct net_device *ndev) if (ql_set_routing_reg (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) { netif_err(qdev, hw, qdev->ndev, - "Failed to set promiscous mode.\n"); + "Failed to set promiscuous mode.\n"); } else { set_bit(QL_PROMISCUOUS, &qdev->flags); } @@ -4291,7 +4291,7 @@ static void qlge_set_multicast_list(struct net_device *ndev) if (ql_set_routing_reg (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) { netif_err(qdev, hw, qdev->ndev, - "Failed to clear promiscous mode.\n"); + "Failed to clear promiscuous mode.\n"); } else { clear_bit(QL_PROMISCUOUS, &qdev->flags); } diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index e3ebd90..200a363 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -535,7 +535,7 @@ static int r6040_rx(struct net_device *dev, int limit) /* RX dribble */ if (err & DSC_RX_ERR_DRI) dev->stats.rx_frame_errors++; - /* Buffer lenght exceeded */ + /* Buffer length exceeded */ if (err & DSC_RX_ERR_BUF) dev->stats.rx_length_errors++; /* Packet too long */ diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 356e74d..337bdcd 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2353,7 +2353,7 @@ static int start_nic(struct s2io_nic *nic)

if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { /* - * Dont see link state interrupts initally on some switches, + * Dont see link state interrupts initially on some switches, * so directly scheduling the link state task here. */ schedule_work(&nic->set_link_task); @@ -3563,7 +3563,7 @@ static void s2io_reset(struct s2io_nic *sp) }

/* - * Clear spurious ECC interrupts that would have occured on + * Clear spurious ECC interrupts that would have occurred on * XFRAME II cards after reset. */ if (sp->device_type == XFRAME_II_DEVICE) { @@ -4065,7 +4065,7 @@ static int s2io_close(struct net_device *dev) * Description : * This function is the Tx entry point of the driver. S2IO NIC supports * certain protocol assist features on Tx side, namely CSO, S/G, LSO. - * NOTE: when device cant queue the pkt,just the trans_start variable will + * NOTE: when device can't queue the pkt,just the trans_start variable will * not be upadted. * Return value: * 0 on success & 1 on failure. diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 7d16030..2d14497 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -376,7 +376,7 @@ static const u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7}; /* Maintains Per FIFO related information. */ struct tx_fifo_config { #define MAX_AVAILABLE_TXDS 8192 - u32 fifo_len; /* specifies len of FIFO upto 8192, ie no of TxDLs */ + u32 fifo_len; /* specifies len of FIFO up to 8192, ie no of TxDLs */ /* Priority definition */ #define TX_FIFO_PRI_0 0 /*Highest */ #define TX_FIFO_PRI_1 1 diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 734fcfb..d96b237 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -692,7 +692,7 @@ static int falcon_gmii_wait(struct efx_nic *efx) efx_oword_t md_stat; int count;

- /* wait upto 50ms - taken max from datasheet */ + /* wait up to 50ms - taken max from datasheet */ for (count = 0; count < 5000; count++) { efx_reado(efx, &md_stat, FR_AB_MD_STAT); if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) { @@ -1221,7 +1221,7 @@ static int falcon_reset_sram(struct efx_nic *efx)

return 0; } - } while (++count < 20); /* wait upto 0.4 sec */ + } while (++count < 20); /* wait up to 0.4 sec */

netif_err(efx, hw, efx->net_dev, "timed out waiting for SRAM reset\n"); return -ETIMEDOUT; diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 5e118f0..d984790 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -453,7 +453,7 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc) * * There's a race here with efx_mcdi_rpc(), because we might receive * a REBOOT event *before* the request has been copied out. In polled - * mode (during startup) this is irrelevent, because efx_mcdi_complete() + * mode (during startup) this is irrelevant, because efx_mcdi_complete() * is ignored. In event mode, this condition is just an edge-case of * receiving a REBOOT event after posting the MCDI request. Did the mc * reboot before or after the copyout? The best we can do always is diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h index b86a15f..41fe06f 100644 --- a/drivers/net/sfc/mcdi_pcol.h +++ b/drivers/net/sfc/mcdi_pcol.h @@ -103,7 +103,7 @@ * * If Code==CMDDONE, then the fields are further interpreted as: * - * - LEVEL==INFO Command succeded + * - LEVEL==INFO Command succeeded * - LEVEL==ERR Command failed * * 0 8 16 24 32 @@ -572,7 +572,7 @@ (4*(_numwords))

/* MC_CMD_SET_RAND_SEED: - * Set the 16byte seed for the MC psuedo-random generator + * Set the 16byte seed for the MC pseudo-random generator */ #define MC_CMD_SET_RAND_SEED 0x1a #define MC_CMD_SET_RAND_SEED_IN_LEN 16 @@ -1162,7 +1162,7 @@ #define MC_CMD_MAC_STATS_CMD_CLEAR_WIDTH 1 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_LBN 2 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_WIDTH 1 -/* Remaining PERIOD* fields only relevent when PERIODIC_CHANGE is set */ +/* Remaining PERIOD* fields only relevant when PERIODIC_CHANGE is set */ #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_LBN 3 #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_WIDTH 1 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_LBN 4 diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c index ec3f740..7e3c65b 100644 --- a/drivers/net/sfc/mcdi_phy.c +++ b/drivers/net/sfc/mcdi_phy.c @@ -449,7 +449,7 @@ void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa) struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; u32 rmtadv;

- /* The link partner capabilities are only relevent if the + /* The link partner capabilities are only relevant if the * link supports flow control autonegotiation */ if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN)) return; diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 215d5c5..9ffa9a6 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -670,7 +670,7 @@ struct efx_filter_state; * @irq_zero_count: Number of legacy IRQs seen with queue flags == 0 * @fatal_irq_level: IRQ level (bit number) used for serious errors * @mtd_list: List of MTDs attached to the NIC - * @nic_data: Hardware dependant state + * @nic_data: Hardware dependent state * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode, * @port_inhibited, efx_monitor() and efx_reconfigure_port() * @port_enabled: Port enabled indicator. diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index 3a0cc63..dd03bf6 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -33,7 +33,7 @@ static char *sgiseeqstr = "SGI Seeq8003"; * with that in mind, I've decided to make this driver look completely like a * stupid Lance from a driver architecture perspective. Only difference is that * here our "ring buffer" looks and acts like a real Lance one does but is - * layed out like how the HPC DMA and the Seeq want it to. You'd be surprised + * laid out like how the HPC DMA and the Seeq want it to. You'd be surprised * how a stupid idea like this can pay off in performance, not to mention * making this driver 2,000 times easier to write. ;-) */ @@ -77,7 +77,7 @@ struct sgiseeq_tx_desc { };

/* - * Warning: This structure is layed out in a certain way because HPC dma + * Warning: This structure is laid out in a certain way because HPC dma * descriptors must be 8-byte aligned. So don't touch this without * some care. */ diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index e9e7a53..8a72a97 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1875,7 +1875,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) if (ret) goto out_unregister;

- /* print device infomation */ + /* print device information */ pr_info("Base address at 0x%x, %pM, IRQ %d.\n", (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);

diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 3406ed8..b436e00 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -93,7 +93,7 @@ enum sis190_registers { IntrStatus = 0x20, IntrMask = 0x24, IntrControl = 0x28, - IntrTimer = 0x2c, // unused (Interupt Timer) + IntrTimer = 0x2c, // unused (Interrupt Timer) PMControl = 0x30, // unused (Power Mgmt Control/Status) rsv2 = 0x34, // reserved ROMControl = 0x38, @@ -234,7 +234,7 @@ enum _DescStatusBit { RxSizeMask = 0x0000ffff /* * The asic could apparently do vlan, TSO, jumbo (sis191 only) and - * provide two (unused with Linux) Tx queues. No publically + * provide two (unused with Linux) Tx queues. No publicly * available documentation alas. */ }; diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 84d4167..cb317cd 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1180,7 +1180,7 @@ sis900_init_rx_ring(struct net_device *net_dev) * * 630E equalizer workaround rule(Cyrus Huang 08/15) * PHY register 14h(Test) - * Bit 14: 0 -- Automatically dectect (default) + * Bit 14: 0 -- Automatically detect (default) * 1 -- Manually set Equalizer filter * Bit 13: 0 -- (Default) * 1 -- Speed up convergence of equalizer setting @@ -1192,7 +1192,7 @@ sis900_init_rx_ring(struct net_device *net_dev) * Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0 * Link Off:Set Bit 13 to 1, Bit 14 to 0 * Calculate Equalizer value: - * When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value. + * When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value. * When the equalizer is stable, this value is not a fixed value. It will be within * a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9) * 0 <= max <= 4 --> set equalizer to max @@ -1723,7 +1723,7 @@ static int sis900_rx(struct net_device *net_dev) rx_size = data_size - CRC_SIZE;

#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) - /* ``TOOLONG'' flag means jumbo packet recived. */ + /* ``TOOLONG'' flag means jumbo packet received. */ if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE) rx_status &= (~ ((unsigned int)TOOLONG)); #endif diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c index 8639a08..2fc5987 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/skfp/ess.c @@ -241,7 +241,7 @@ int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, != SMT_RDF_SUCCESS) || (sm->smt_tid != smc->ess.alloc_trans_id)) {

- DB_ESS("ESS: Allocation Responce not accepted\n",0,0) ; + DB_ESS("ESS: Allocation Response not accepted\n",0,0) ; return fs; }

@@ -393,7 +393,7 @@ static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhe * | T-NEG | * - - * - * T-NEG is discribed by the equation: + * T-NEG is described by the equation: * * (-) fddiMACT-NEG * T-NEG = ------------------- @@ -479,7 +479,7 @@ static void ess_send_response(struct s_smc *smc, struct smt_header *sm, void *p ;

/* - * get and initialize the responce frame + * get and initialize the response frame */ if (sba_cmd == CHANGE_ALLOCATION) { if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY, @@ -578,7 +578,7 @@ static void ess_send_alc_req(struct s_smc *smc) } /* - * get and initialize the responce frame + * get and initialize the response frame */ if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST, sizeof(struct smt_sba_alc_req)))) diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c index ca4e7bb..a20ed1a 100644 --- a/drivers/net/skfp/fplustm.c +++ b/drivers/net/skfp/fplustm.c @@ -340,7 +340,7 @@ static void mac_counter_init(struct s_smc *smc) outpw(FM_A(FM_LCNTR),0) ; outpw(FM_A(FM_ECNTR),0) ; /* - * clear internal error counter stucture + * clear internal error counter structure */ ec = (u_long *)&smc->hw.fp.err_stats ; for (i = (sizeof(struct err_st)/sizeof(long)) ; i ; i--) @@ -1262,8 +1262,8 @@ Function DOWNCALL/INTERN (SMT, fplustm.c)

Para mode = 1 RX_ENABLE_ALLMULTI enable all multicasts 2 RX_DISABLE_ALLMULTI disable "enable all multicasts" - 3 RX_ENABLE_PROMISC enable promiscous - 4 RX_DISABLE_PROMISC disable promiscous + 3 RX_ENABLE_PROMISC enable promiscuous + 4 RX_DISABLE_PROMISC disable promiscuous 5 RX_ENABLE_NSA enable reception of NSA frames 6 RX_DISABLE_NSA disable reception of NSA frames

diff --git a/drivers/net/skfp/h/cmtdef.h b/drivers/net/skfp/h/cmtdef.h index f2f771d..5a6c612 100644 --- a/drivers/net/skfp/h/cmtdef.h +++ b/drivers/net/skfp/h/cmtdef.h @@ -19,7 +19,7 @@

/* * implementation specific constants - * MODIIFY THE FOLLWOING THREE DEFINES + * MODIIFY THE FOLLOWING THREE DEFINES */ #define AMDPLC /* if Amd PLC chip used */ #ifdef CONC @@ -456,7 +456,7 @@ struct s_plc { u_long soft_err ; /* error counter */ u_long parity_err ; /* error counter */ u_long ebuf_err ; /* error counter */ - u_long ebuf_cont ; /* continous error counter */ + u_long ebuf_cont ; /* continuous error counter */ u_long phyinv ; /* error counter */ u_long vsym_ctr ; /* error counter */ u_long mini_ctr ; /* error counter */ diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h index 6d738e1..d43191e 100644 --- a/drivers/net/skfp/h/fplustm.h +++ b/drivers/net/skfp/h/fplustm.h @@ -237,8 +237,8 @@ struct s_smt_fp { */ #define RX_ENABLE_ALLMULTI 1 /* enable all multicasts */ #define RX_DISABLE_ALLMULTI 2 /* disable "enable all multicasts" */ -#define RX_ENABLE_PROMISC 3 /* enable promiscous */ -#define RX_DISABLE_PROMISC 4 /* disable promiscous */ +#define RX_ENABLE_PROMISC 3 /* enable promiscuous */ +#define RX_DISABLE_PROMISC 4 /* disable promiscuous */ #define RX_ENABLE_NSA 5 /* enable reception of NSA frames */ #define RX_DISABLE_NSA 6 /* disable reception of NSA frames */

diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h index 026a83b..c774a95 100644 --- a/drivers/net/skfp/h/smc.h +++ b/drivers/net/skfp/h/smc.h @@ -388,7 +388,7 @@ struct smt_config { u_long rmt_t_poll ; /* RMT : claim/beacon poller */ u_long rmt_dup_mac_behavior ; /* Flag for the beavior of SMT if * a Duplicate MAC Address was detected. - * FALSE: SMT will leave finaly the ring + * FALSE: SMT will leave finally the ring * TRUE: SMT will reinstert into the ring */ u_long mac_d_max ; /* MAC : D_Max timer value */ diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h index 2976757..2030f9c 100644 --- a/drivers/net/skfp/h/smt.h +++ b/drivers/net/skfp/h/smt.h @@ -793,7 +793,7 @@ struct smt_rdf { } ;

/* - * SBA Request Allocation Responce Frame + * SBA Request Allocation Response Frame */ struct smt_sba_alc_res { struct smt_header smt ; /* generic header */ diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h index 5ba0b83..0b73690 100644 --- a/drivers/net/skfp/h/supern_2.h +++ b/drivers/net/skfp/h/supern_2.h @@ -14,7 +14,7 @@

/* defines for AMD Supernet II chip set - the chips are refered to as + the chips are referred to as FPLUS Formac Plus PLC Physical Layer

@@ -386,7 +386,7 @@ struct tx_queue { #define FM_MDISRCV (4<<8) /* disable receive function */ #define FM_MRES0 (5<<8) /* reserve */ #define FM_MLIMPROM (6<<8) /* limited-promiscuous mode */ -#define FM_MPROMISCOUS (7<<8) /* address detection : promiscous */ +#define FM_MPROMISCOUS (7<<8) /* address detection : promiscuous */

#define FM_SELSA 0x0800 /* select-short-address bit */

diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/skfp/hwmtm.c index af5a755..e26398b 100644 --- a/drivers/net/skfp/hwmtm.c +++ b/drivers/net/skfp/hwmtm.c @@ -691,7 +691,7 @@ static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue) * interrupt service routine, handles the interrupt requests * generated by the FDDI adapter. * - * NOTE: The operating system dependent module must garantee that the + * NOTE: The operating system dependent module must guarantee that the * interrupts of the adapter are disabled when it calls fddi_isr. * * About the USE_BREAK_ISR mechanismn: diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/skfp/pcmplc.c index 112d35b..88d02d0 100644 --- a/drivers/net/skfp/pcmplc.c +++ b/drivers/net/skfp/pcmplc.c @@ -1680,7 +1680,7 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd) * Prevent counter from being wrapped after * hanging years in that interrupt. */ - plc->ebuf_cont++ ; /* Ebuf continous error */ + plc->ebuf_cont++ ; /* Ebuf continuous error */ }

#ifdef SUPERNET_3 @@ -1717,8 +1717,8 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd) } #endif /* SUPERNET_3 */ } else { - /* Reset the continous error variable */ - plc->ebuf_cont = 0 ; /* reset Ebuf continous error */ + /* Reset the continuous error variable */ + plc->ebuf_cont = 0 ; /* reset Ebuf continuous error */ } if (cmd & PL_PHYINV) { /* physical layer invalid signal */ plc->phyinv++ ; diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c index 1e1bd0c..08d9432 100644 --- a/drivers/net/skfp/smt.c +++ b/drivers/net/skfp/smt.c @@ -219,7 +219,7 @@ void smt_emulate_token_ct(struct s_smc *smc, int mac_index)

/* * Only when ring is up we will have a token count. The - * flag is unfortunatly a single instance value. This + * flag is unfortunately a single instance value. This * doesn't matter now, because we currently have only * one MAC instance. */ diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 507addc..51c0214 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -1038,7 +1038,7 @@ enum {

PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */ PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */ - PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */ + PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occurred */ PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */ PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */ PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */ @@ -1721,8 +1721,8 @@ enum { GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */ GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */ GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */ - GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */ - GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */ + GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occurred */ + GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occurred */

GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */ GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ @@ -2227,7 +2227,7 @@ enum { XM_ST_BC = 1<<7, /* Bit 7: Broadcast packet */ XM_ST_MC = 1<<6, /* Bit 6: Multicast packet */ XM_ST_UC = 1<<5, /* Bit 5: Unicast packet */ - XM_ST_TX_UR = 1<<4, /* Bit 4: FIFO Underrun occured */ + XM_ST_TX_UR = 1<<4, /* Bit 4: FIFO Underrun occurred */ XM_ST_CS_ERR = 1<<3, /* Bit 3: Carrier Sense Error */ XM_ST_LAT_COL = 1<<2, /* Bit 2: Late Collision Error */ XM_ST_MUL_COL = 1<<1, /* Bit 1: Multiple Collisions */ diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2a91868..ff8d262 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -932,7 +932,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);

- /* On chips without ram buffer, pause is controled by MAC level */ + /* On chips without ram buffer, pause is controlled by MAC level */ if (!(hw->flags & SKY2_HW_RAM_BUFFER)) { /* Pause threshold is scaled by 8 in bytes */ if (hw->chip_id == CHIP_ID_YUKON_FE_P && @@ -3255,7 +3255,7 @@ static void sky2_reset(struct sky2_hw *hw)

/* Take device down (offline). * Equivalent to doing dev_stop() but this does not - * inform upper layers of the transistion. + * inform upper layers of the transition. */ static void sky2_detach(struct net_device *dev) { diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 6861b0e..0c6d10c 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1194,7 +1194,7 @@ enum {

PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */ PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */ - PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */ + PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occurred */ PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */ PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */ PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */ @@ -1725,8 +1725,8 @@ enum { GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */ GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */ GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */ - GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */ - GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */ + GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occurred */ + GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occurred */

GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */ GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 68d48ab..5f53fbb 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -921,7 +921,7 @@ static const char * chip_ids[ 16 ] = { * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not * aligned to a 32 bit boundary. I tell you that does exist! * Fortunately the affected register accesses can be easily worked around - * since we can write zeroes to the preceeding 16 bits without adverse + * since we can write zeroes to the preceding 16 bits without adverse * effects and use a 32-bit access. * * Enforce it on any 32-bit capable setup for now. diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 1566259..c498b72 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1669,7 +1669,7 @@ static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) }

if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { - SMSC_TRACE(DRV, "Error occured during eeprom operation"); + SMSC_TRACE(DRV, "Error occurred during eeprom operation"); return -EINVAL; }

diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index b09ee1c..4c92ad8 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -364,7 +364,7 @@ static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op) }

if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { - smsc_info(HW, "Error occured during eeprom operation"); + smsc_info(HW, "Error occurred during eeprom operation"); return -EINVAL; }

diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/stmmac/norm_desc.c index cd0cc76..029c2a2 100644 --- a/drivers/net/stmmac/norm_desc.c +++ b/drivers/net/stmmac/norm_desc.c @@ -67,7 +67,7 @@ static int ndesc_get_tx_len(struct dma_desc *p)

/* This function verifies if each incoming frame has some errors * and, if required, updates the multicast statistics. - * In case of success, it returns csum_none becasue the device + * In case of success, it returns csum_none because the device * is not able to compute the csum in HW. */ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x, struct dma_desc *p) diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h index 8db8894..4943e97 100644 --- a/drivers/net/sunbmac.h +++ b/drivers/net/sunbmac.h @@ -185,7 +185,7 @@ #define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */ #define BIGMAC_RXCFG_FIFO 0x0000000e /* Default rx fthresh... */ #define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */ -#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */ +#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */ #define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */ #define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */ #define BIGMAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */ diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index c1a3448..d3be735 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1150,7 +1150,7 @@ static void gem_pcs_reinit_adv(struct gem *gp) val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); writel(val, gp->regs + PCS_CFG);

- /* Advertise all capabilities except assymetric + /* Advertise all capabilities except asymmetric * pause. */ val = readl(gp->regs + PCS_MIIADV); diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h index 756b5bf..64f2783 100644 --- a/drivers/net/sunhme.h +++ b/drivers/net/sunhme.h @@ -223,7 +223,7 @@ /* BigMac receive config register. */ #define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */ #define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */ -#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */ +#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */ #define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */ #define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */ #define BIGMAC_RXCFG_REJME 0x00000200 /* Reject packets addressed to me */ diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index b6eec8c..7ca51ce 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -119,13 +119,13 @@ struct tc35815_regs { /* * Bit assignments */ -/* DMA_Ctl bit asign ------------------------------------------------------- */ +/* DMA_Ctl bit assign ------------------------------------------------------- */ #define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */ #define DMA_RxAlign_1 0x00400000 #define DMA_RxAlign_2 0x00800000 #define DMA_RxAlign_3 0x00c00000 #define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */ -#define DMA_IntMask 0x00040000 /* 1:Interupt mask */ +#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */ #define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */ #define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */ #define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */ @@ -134,11 +134,11 @@ struct tc35815_regs { #define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */ #define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */

-/* RxFragSize bit asign ---------------------------------------------------- */ +/* RxFragSize bit assign ---------------------------------------------------- */ #define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */ #define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */

-/* MAC_Ctl bit asign ------------------------------------------------------- */ +/* MAC_Ctl bit assign ------------------------------------------------------- */ #define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */ #define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */ #define MAC_MissRoll 0x00000400 /* 1:Missed Roll */ @@ -152,7 +152,7 @@ struct tc35815_regs { #define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */ #define MAC_HaltReq 0x00000001 /* 1:Halt request */

-/* PROM_Ctl bit asign ------------------------------------------------------ */ +/* PROM_Ctl bit assign ------------------------------------------------------ */ #define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */ #define PROM_Read 0x00004000 /*10:Read operation */ #define PROM_Write 0x00002000 /*01:Write operation */ @@ -162,7 +162,7 @@ struct tc35815_regs { #define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */ /*00xxxx: disable */

-/* CAM_Ctl bit asign ------------------------------------------------------- */ +/* CAM_Ctl bit assign ------------------------------------------------------- */ #define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */ #define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/ /* accept other */ @@ -170,7 +170,7 @@ struct tc35815_regs { #define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */ #define CAM_StationAcc 0x00000001 /* 1:unicast accept */

-/* CAM_Ena bit asign ------------------------------------------------------- */ +/* CAM_Ena bit assign ------------------------------------------------------- */ #define CAM_ENTRY_MAX 21 /* CAM Data entry max count */ #define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits) */ #define CAM_Ena_Bit(index) (1 << (index)) @@ -178,7 +178,7 @@ struct tc35815_regs { #define CAM_ENTRY_SOURCE 1 #define CAM_ENTRY_MACCTL 20

-/* Tx_Ctl bit asign -------------------------------------------------------- */ +/* Tx_Ctl bit assign -------------------------------------------------------- */ #define Tx_En 0x00000001 /* 1:Transmit enable */ #define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */ #define Tx_NoPad 0x00000004 /* 1:Suppress Padding */ @@ -192,7 +192,7 @@ struct tc35815_regs { #define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */ #define Tx_EnComp 0x00004000 /* 1:Enable Completion */

-/* Tx_Stat bit asign ------------------------------------------------------- */ +/* Tx_Stat bit assign ------------------------------------------------------- */ #define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */ #define Tx_ExColl 0x00000010 /* Excessive Collision */ #define Tx_TXDefer 0x00000020 /* Transmit Defered */ @@ -208,7 +208,7 @@ struct tc35815_regs { #define Tx_Halted 0x00008000 /* Tx Halted */ #define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */

-/* Rx_Ctl bit asign -------------------------------------------------------- */ +/* Rx_Ctl bit assign -------------------------------------------------------- */ #define Rx_EnGood 0x00004000 /* 1:Enable Good */ #define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */ #define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */ @@ -222,7 +222,7 @@ struct tc35815_regs { #define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */ #define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */

-/* Rx_Stat bit asign ------------------------------------------------------- */ +/* Rx_Stat bit assign ------------------------------------------------------- */ #define Rx_Halted 0x00008000 /* Rx Halted */ #define Rx_Good 0x00004000 /* Rx Good */ #define Rx_RxPar 0x00002000 /* Rx Parity Error */ @@ -238,7 +238,7 @@ struct tc35815_regs {

#define Rx_Stat_Mask 0x0000FFF0 /* Rx All Status Mask */

-/* Int_En bit asign -------------------------------------------------------- */ +/* Int_En bit assign -------------------------------------------------------- */ #define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */ #define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Ctl Complete Enable */ #define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */ @@ -253,7 +253,7 @@ struct tc35815_regs { #define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */ /* Exhausted Enable */

-/* Int_Src bit asign ------------------------------------------------------- */ +/* Int_Src bit assign ------------------------------------------------------- */ #define Int_NRabt 0x00004000 /* 1:Non Recoverable error */ #define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */ #define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */ @@ -270,8 +270,8 @@ struct tc35815_regs { #define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */ #define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */

-/* MD_CA bit asign --------------------------------------------------------- */ -#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */ +/* MD_CA bit assign --------------------------------------------------------- */ +#define MD_CA_PreSup 0x00001000 /* 1:Preamble Suppress */ #define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */ #define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */

@@ -296,7 +296,7 @@ struct BDesc {

#define FD_ALIGN 16

-/* Frame Descripter bit asign ---------------------------------------------- */ +/* Frame Descripter bit assign ---------------------------------------------- */ #define FD_FDLength_MASK 0x0000FFFF /* Length MASK */ #define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */ #define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */ @@ -309,8 +309,8 @@ struct BDesc { #define FD_Next_EOL 0x00000001 /* FD EOL indicator */ #define FD_BDCnt_SHIFT 16

-/* Buffer Descripter bit asign --------------------------------------------- */ -#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */ +/* Buffer Descripter bit assign --------------------------------------------- */ +#define BD_BuffLength_MASK 0x0000FFFF /* Receive Data Size */ #define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */ #define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */ #define BD_CownsBD 0x80000000 /* BD Controller owner bit */ @@ -339,7 +339,7 @@ struct BDesc { #define TX_THRESHOLD 1024 /* used threshold with packet max byte for low pci transfer ability.*/ #define TX_THRESHOLD_MAX 1536 -/* setting threshold max value when overrun error occured this count. */ +/* setting threshold max value when overrun error occurred this count. */ #define TX_THRESHOLD_KEEP_LIMIT 10

/* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */ diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index 3397618..8564ec5 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -645,7 +645,7 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd) if (cmd != SIOCDEVPRIVATE) { error = copy_from_user(data, ifr->ifr_data, sizeof(data)); if (error) { - pr_err("cant copy from user\n"); + pr_err("can't copy from user\n"); RET(-EFAULT); } DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]); @@ -999,7 +999,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n) * * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be * filled and packets will be dropped by nic without getting into host or - * cousing interrupt. Anyway, in that condition, host has no chance to proccess + * cousing interrupt. Anyway, in that condition, host has no chance to process * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles */

@@ -1200,8 +1200,8 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd) RET(); }

-/* bdx_rx_receive - recieves full packets from RXD fifo and pass them to OS - * NOTE: a special treatment is given to non-continous descriptors +/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS + * NOTE: a special treatment is given to non-continuous descriptors * that start near the end, wraps around and continue at the beginning. a second * part is copied right after the first, and then descriptor is interpreted as * normal. fifo has an extra space to allow such operations @@ -1584,9 +1584,9 @@ err_mem: }

/* - * bdx_tx_space - calculates avalable space in TX fifo + * bdx_tx_space - calculates available space in TX fifo * @priv - NIC private structure - * Returns avaliable space in TX fifo in bytes + * Returns available space in TX fifo in bytes */ static inline int bdx_tx_space(struct bdx_priv *priv) { diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h index b6ba860..c5642fe 100644 --- a/drivers/net/tehuti.h +++ b/drivers/net/tehuti.h @@ -502,7 +502,7 @@ struct txd_desc { #define GMAC_RX_FILTER_ACRC 0x0010 /* accept crc error */ #define GMAC_RX_FILTER_AM 0x0008 /* accept multicast */ #define GMAC_RX_FILTER_AB 0x0004 /* accept broadcast */ -#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscous mode */ +#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscuous mode */

#define MAX_FRAME_AB_VAL 0x3fff /* 13:0 */

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 73c942d..b8c5f35 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9712,7 +9712,7 @@ static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, eeprom->len += b_count; }

- /* read bytes upto the last 4 byte boundary */ + /* read bytes up to the last 4 byte boundary */ pd = &data[eeprom->len]; for (i = 0; i < (len - (len & 3)); i += 4) { ret = tg3_nvram_read_be32(tp, offset + i, &val); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 73884b6..5e96706 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2130,7 +2130,7 @@ #define MII_TG3_DSP_EXP96 0x0f96 #define MII_TG3_DSP_EXP97 0x0f97

-#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */ +#define MII_TG3_AUX_CTRL 0x18 /* auxiliary control register */

#define MII_TG3_AUXCTL_PCTL_100TX_LPWR 0x0010 #define MII_TG3_AUXCTL_PCTL_SPR_ISOLATE 0x0020 @@ -2146,7 +2146,7 @@ #define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400 #define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000

-#define MII_TG3_AUX_STAT 0x19 /* auxilliary status register */ +#define MII_TG3_AUX_STAT 0x19 /* auxiliary status register */ #define MII_TG3_AUX_STAT_LPASS 0x0004 #define MII_TG3_AUX_STAT_SPDMASK 0x0700 #define MII_TG3_AUX_STAT_10HALF 0x0100 diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index 10800f1..8a3b191 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -208,7 +208,7 @@ static void print_rx_state(struct net_device *dev) * passing/getting the next value from the nic. As with all requests * on this nic it has to be done in two stages, a) tell the nic which * memory address you want to access and b) pass/get the value from the nic. - * With the EEProm, you have to wait before and inbetween access a) and b). + * With the EEProm, you have to wait before and between access a) and b). * As this is only read at initialization time and the wait period is very * small we shouldn't have to worry about scheduling issues. */ diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 785ad1a..2bedc0a 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -73,7 +73,7 @@ static void madgemc_setint(struct net_device *dev, int val); static irqreturn_t madgemc_interrupt(int irq, void *dev_id);

/* - * These work around paging, however they don't guarentee you're on the + * These work around paging, however they don't guarantee you're on the * right page. */ #define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8))) @@ -387,7 +387,7 @@ getout: * both with their own disadvantages... * * 1) Read in the SIFSTS register from the TMS controller. This - * is guarenteed to be accurate, however, there's a fairly + * is guaranteed to be accurate, however, there's a fairly * large performance penalty for doing so: the Madge chips * must request the register from the Eagle, the Eagle must * read them from its internal bus, and then take the route @@ -454,7 +454,7 @@ static irqreturn_t madgemc_interrupt(int irq, void *dev_id) }

/* - * Set the card to the prefered ring speed. + * Set the card to the preferred ring speed. * * Unlike newer cards, the MC16/32 have their speed selection * circuit connected to the Madge ASICs and not to the TMS380 diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index 63db5a6..d9044ab 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -393,7 +393,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev) tp->rx_bdb_end[NON_MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, 0);

/* Allocate MAC transmit buffers. - * MAC Tx Buffers doen't have to be on an ODD Boundry. + * MAC Tx Buffers doen't have to be on an ODD Boundary. */ tp->tx_buff_head[MAC_QUEUE] = (__u16 *)smctr_malloc(dev, tp->tx_buff_size[MAC_QUEUE]); @@ -415,7 +415,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)

/* Allocate Non-MAC transmit buffers. * ?? For maximum Netware performance, put Tx Buffers on - * ODD Boundry and then restore malloc to Even Boundrys. + * ODD Boundary and then restore malloc to Even Boundrys. */ smctr_malloc(dev, 1L); tp->tx_buff_head[NON_MAC_QUEUE] @@ -1311,7 +1311,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev) mem_used += sizeof(BDBlock) * tp->num_rx_bdbs[MAC_QUEUE];

/* Allocate MAC transmit buffers. - * MAC transmit buffers don't have to be on an ODD Boundry. + * MAC transmit buffers don't have to be on an ODD Boundary. */ mem_used += tp->tx_buff_size[MAC_QUEUE];

@@ -1325,7 +1325,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev)

/* Allocate Non-MAC transmit buffers. * For maximum Netware performance, put Tx Buffers on - * ODD Boundry,and then restore malloc to Even Boundrys. + * ODD Boundary,and then restore malloc to Even Boundrys. */ mem_used += 1L; mem_used += tp->tx_buff_size[NON_MAC_QUEUE]; @@ -3069,8 +3069,8 @@ static int smctr_load_node_addr(struct net_device *dev) * disabled.!? * * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask - * has any multi-cast or promiscous bits set, the receive_mask needs to - * be changed to clear the multi-cast or promiscous mode bits, the lobe_test + * has any multi-cast or promiscuous bits set, the receive_mask needs to + * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test * run, and then the receive mask set back to its original value if the test * is successful. */ diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h index 60b30ee..e5a617c 100644 --- a/drivers/net/tokenring/tms380tr.h +++ b/drivers/net/tokenring/tms380tr.h @@ -442,7 +442,7 @@ typedef struct { #define PASS_FIRST_BUF_ONLY 0x0100 /* Passes only first internal buffer * of each received frame; FrameSize * of RPLs must contain internal - * BUFFER_SIZE bits for promiscous mode. + * BUFFER_SIZE bits for promiscuous mode. */ #define ENABLE_FULL_DUPLEX_SELECTION 0x2000 /* Enable the use of full-duplex diff --git a/drivers/net/tsi108_eth.h b/drivers/net/tsi108_eth.h index 5a77ae6..5fee7d7 100644 --- a/drivers/net/tsi108_eth.h +++ b/drivers/net/tsi108_eth.h @@ -305,9 +305,9 @@ #define TSI108_TX_CRC (1 << 5) /* Generate CRC for this packet */ #define TSI108_TX_INT (1 << 14) /* Generate an IRQ after frag. processed */ #define TSI108_TX_RETRY (0xf << 16) /* 4 bit field indicating num. of retries */ -#define TSI108_TX_COL (1 << 20) /* Set if a collision occured */ -#define TSI108_TX_LCOL (1 << 24) /* Set if a late collision occured */ -#define TSI108_TX_UNDER (1 << 25) /* Set if a FIFO underrun occured */ +#define TSI108_TX_COL (1 << 20) /* Set if a collision occurred */ +#define TSI108_TX_LCOL (1 << 24) /* Set if a late collision occurred */ +#define TSI108_TX_UNDER (1 << 25) /* Set if a FIFO underrun occurred */ #define TSI108_TX_RLIM (1 << 26) /* Set if the retry limit was reached */ #define TSI108_TX_OK (1 << 30) /* Set if the frame TX was successful */ #define TSI108_TX_OWN (1 << 31) /* Set if the device owns the descriptor */ @@ -332,7 +332,7 @@ typedef struct { #define TSI108_RX_RUNT (1 << 4)/* Packet is less than minimum size */ #define TSI108_RX_HASH (1 << 7)/* Hash table match */ #define TSI108_RX_BAD (1 << 8) /* Bad frame */ -#define TSI108_RX_OVER (1 << 9) /* FIFO overrun occured */ +#define TSI108_RX_OVER (1 << 9) /* FIFO overrun occurred */ #define TSI108_RX_TRUNC (1 << 11) /* Packet truncated due to excess length */ #define TSI108_RX_CRC (1 << 12) /* Packet had a CRC error */ #define TSI108_RX_INT (1 << 13) /* Generate an IRQ after frag. processed */ diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index 4dbd493..efaa1d6 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -79,7 +79,7 @@ every usable DECchip board, I pinched Donald's 'next_module' field to link my modules together.

- Upto 15 EISA cards can be supported under this driver, limited primarily + Up to 15 EISA cards can be supported under this driver, limited primarily by the available IRQ lines. I have checked different configurations of multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a problem yet (provided you have at least depca.c v0.38) ... @@ -517,7 +517,7 @@ struct mii_phy { u_int mci; /* 21142 MII Connector Interrupt info */ };

-#define DE4X5_MAX_PHY 8 /* Allow upto 8 attached PHY devices per board */ +#define DE4X5_MAX_PHY 8 /* Allow up to 8 attached PHY devices per board */

struct sia_phy { u_char mc; /* Media Code */ @@ -1436,7 +1436,7 @@ de4x5_sw_reset(struct net_device *dev)

/* Poll for setup frame completion (adapter interrupts are disabled now) */

- for (j=0, i=0;(i<500) && (j==0);i++) { /* Upto 500ms delay */ + for (j=0, i=0;(i<500) && (j==0);i++) { /* Up to 500ms delay */ mdelay(1); if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1; } diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 7064e03..fb07f48 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -1224,7 +1224,7 @@ static void dmfe_timer(unsigned long data)

/* If chip reports that link is failed it could be because external - PHY link status pin is not conected correctly to chip + PHY link status pin is not connected correctly to chip To be sure ask PHY too. */

diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index 3031ed9..296486b 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -115,7 +115,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp) 0x02, /* phy reset sequence length */ 0x01, 0x00, /* phy reset sequence */ 0x00, 0x78, /* media capabilities */ - 0x00, 0xe0, /* nway advertisment */ + 0x00, 0xe0, /* nway advertisement */ 0x00, 0x05, /* fdx bit map */ 0x00, 0x06 /* ttm bit map */ }; diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index 7fa5ec2..82653cb 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -846,7 +846,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev) if(typhoon_num_free_tx(txRing) < (numDesc + 2)) { netif_stop_queue(dev);

- /* A Tx complete IRQ could have gotten inbetween, making + /* A Tx complete IRQ could have gotten between, making * the ring free again. Only need to recheck here, since * Tx is serialized. */ diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 055b87a..d12fcad 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -80,7 +80,7 @@ struct ucc_geth { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in successfull + that where involved in successful transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ @@ -759,7 +759,7 @@ struct ucc_geth_hardware_statistics { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in successfull + that where involved in successful transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index 5f3b976..5552847 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -190,7 +190,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)

/* * EEM packet header format: - * b0..14: EEM type dependant (Data or Command) + * b0..14: EEM type dependent (Data or Command) * b15: bmType */ header = get_unaligned_le16(skb->data); diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 7dc8497..ad0298f 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -1221,7 +1221,7 @@ static void kaweth_disconnect(struct usb_interface *intf)

usb_set_intfdata(intf, NULL); if (!kaweth) { - dev_warn(&intf->dev, "unregistering non-existant device\n"); + dev_warn(&intf->dev, "unregistering non-existent device\n"); return; } netdev = kaweth->net; diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 5e7f069..eb5d75d 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1861,7 +1861,7 @@ static void rhine_restart_tx(struct net_device *dev) { u32 intr_status;

/* - * If new errors occured, we need to sort them out before doing Tx. + * If new errors occurred, we need to sort them out before doing Tx. * In that case the ISR will be back here RSN anyway. */ intr_status = get_intr_status(dev); @@ -1887,7 +1887,7 @@ static void rhine_restart_tx(struct net_device *dev) { /* This should never happen */ if (debug > 1) printk(KERN_WARNING "%s: rhine_restart_tx() " - "Another error occured %8.8x.\n", + "Another error occurred %8.8x.\n", dev->name, intr_status); }

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 0d6fec6..4fe0517 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -292,7 +292,7 @@ VELOCITY_PARAM(DMA_length, "DMA length"); /* IP_byte_align[] is used for IP header DWORD byte aligned 0: indicate the IP header won't be DWORD byte aligned.(Default) . 1: indicate the IP header will be DWORD byte aligned. - In some enviroment, the IP header should be DWORD byte aligned, + In some environment, the IP header should be DWORD byte aligned, or the packet will be droped when we receive it. (eg: IPVS) */ VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned"); @@ -1994,7 +1994,7 @@ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb) * @dev: network device * * Replace the current skb that is scheduled for Rx processing by a - * shorter, immediatly allocated skb, if the received packet is small + * shorter, immediately allocated skb, if the received packet is small * enough. This function returns a negative value if the received * packet is too big or if memory is exhausted. */ diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index cc14b4a..0d47c3a 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -892,7 +892,7 @@ vmxnet3_prepare_tso(struct sk_buff *skb, * Transmits a pkt thru a given tq * Returns: * NETDEV_TX_OK: descriptors are setup successfully - * NETDEV_TX_OK: error occured, the pkt is dropped + * NETDEV_TX_OK: error occurred, the pkt is dropped * NETDEV_TX_BUSY: tx ring is full, queue is stopped * * Side-effects: @@ -2685,7 +2685,7 @@ vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) * Enable MSIx vectors. * Returns : * 0 on successful enabling of required vectors, - * VMXNET3_LINUX_MIN_MSIX_VECT when only minumum number of vectors required + * VMXNET3_LINUX_MIN_MSIX_VECT when only minimum number of vectors required * could be enabled. * number of vectors which can be enabled otherwise (this number is smaller * than VMXNET3_LINUX_MIN_MSIX_VECT) diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c index e74e4b4..401bebf 100644 --- a/drivers/net/vxge/vxge-config.c +++ b/drivers/net/vxge/vxge-config.c @@ -187,7 +187,7 @@ vxge_hw_vpath_fw_api(struct __vxge_hw_virtualpath *vpath, u32 action, VXGE_HW_DEF_DEVICE_POLL_MILLIS);

/* The __vxge_hw_device_register_poll can udelay for a significant - * amount of time, blocking other proccess from the CPU. If it delays + * amount of time, blocking other process from the CPU. If it delays * for ~5secs, a NMI error can occur. A way around this is to give up * the processor via msleep, but this is not allowed is under lock. * So, only allow it to sleep for ~4secs if open. Otherwise, delay for diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index 395423a..aff68c1 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -2282,7 +2282,7 @@ vxge_alarm_msix_handle(int irq, void *dev_id) VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;

for (i = 0; i < vdev->no_of_vpath; i++) { - /* Reduce the chance of loosing alarm interrupts by masking + /* Reduce the chance of losing alarm interrupts by masking * the vector. A pending bit will be set if an alarm is * generated and on unmask the interrupt will be fired. */ @@ -2788,7 +2788,7 @@ static int vxge_open(struct net_device *dev) }

/* Enable vpath to sniff all unicast/multicast traffic that not - * addressed to them. We allow promiscous mode for PF only + * addressed to them. We allow promiscuous mode for PF only */

val64 = 0; @@ -2890,7 +2890,7 @@ out0: return ret; }

-/* Loop throught the mac address list and delete all the entries */ +/* Loop through the mac address list and delete all the entries */ static void vxge_free_mac_add_list(struct vxge_vpath *vpath) {

@@ -2957,7 +2957,7 @@ static int do_vxge_close(struct net_device *dev, int do_io) val64); }

- /* Remove the function 0 from promiscous mode */ + /* Remove the function 0 from promiscuous mode */ vxge_hw_mgmt_reg_write(vdev->devh, vxge_hw_mgmt_reg_type_mrpcim, 0, diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c index 8674f33..2638b8d 100644 --- a/drivers/net/vxge/vxge-traffic.c +++ b/drivers/net/vxge/vxge-traffic.c @@ -1111,7 +1111,7 @@ void vxge_hw_channel_dtr_free(struct __vxge_hw_channel *channel, void *dtrh) * vxge_hw_channel_dtr_count * @channel: Channel handle. Obtained via vxge_hw_channel_open(). * - * Retreive number of DTRs available. This function can not be called + * Retrieve number of DTRs available. This function can not be called * from data path. ring_initial_replenishi() is the only user. */ int vxge_hw_channel_dtr_count(struct __vxge_hw_channel *channel) @@ -2060,7 +2060,7 @@ enum vxge_hw_status vxge_hw_vpath_promisc_enable(

vpath = vp->vpath;

- /* Enable promiscous mode for function 0 only */ + /* Enable promiscuous mode for function 0 only */ if (!(vpath->hldev->access_rights & VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM)) return VXGE_HW_OK; diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h index 9d9dfda..6c2fc0b 100644 --- a/drivers/net/vxge/vxge-traffic.h +++ b/drivers/net/vxge/vxge-traffic.h @@ -681,7 +681,7 @@ struct vxge_hw_xmac_aggr_stats { * @rx_red_discard: Count of received frames that are discarded because of RED * (Random Early Discard). * @rx_xgmii_ctrl_err_cnt: Maintains a count of unexpected or misplaced control - * characters occuring between times of normal data transmission + * characters occurring between times of normal data transmission * (i.e. not included in RX_XGMII_DATA_ERR_CNT). This counter is * incremented when either - * 1) The Reconciliation Sublayer (RS) is expecting one control diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 10bafd5..6fb6f8e 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -329,7 +329,7 @@ static int startmicrocode(struct cosa_data *cosa, int address); static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len); static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);

-/* Auxilliary functions */ +/* Auxiliary functions */ static int get_wait_data(struct cosa_data *cosa); static int put_wait_data(struct cosa_data *cosa, int data); static int puthexnumber(struct cosa_data *cosa, int number); diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 4578e5b..acb9ea8 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -56,7 +56,7 @@ * IV. Notes * The current error (XDU, RFO) recovery code is untested. * So far, RDO takes his RX channel down and the right sequence to enable it - * again is still a mistery. If RDO happens, plan a reboot. More details + * again is still a mystery. If RDO happens, plan a reboot. More details * in the code (NB: as this happens, TX still works). * Don't mess the cables during operation, especially on DTE ports. I don't * suggest it for DCE either but at least one can get some messages instead @@ -1065,7 +1065,7 @@ static int dscc4_open(struct net_device *dev)

/* * Due to various bugs, there is no way to reliably reset a - * specific port (manufacturer's dependant special PCI #RST wiring + * specific port (manufacturer's dependent special PCI #RST wiring * apart: it affects all ports). Thus the device goes in the best * silent mode possible at dscc4_close() time and simply claims to * be up if it's opened again. It still isn't possible to change @@ -1230,9 +1230,9 @@ static inline int dscc4_check_clock_ability(int port) * scaling. Of course some rounding may take place. * - no high speed mode (40Mb/s). May be trivial to do but I don't have an * appropriate external clocking device for testing. - * - no time-slot/clock mode 5: shameless lazyness. + * - no time-slot/clock mode 5: shameless laziness. * - * The clock signals wiring can be (is ?) manufacturer dependant. Good luck. + * The clock signals wiring can be (is ?) manufacturer dependent. Good luck. * * BIG FAT WARNING: if the device isn't provided enough clocking signal, it * won't pass the init sequence. For example, straight back-to-back DTE without diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c index 48edc5f..e817583 100644 --- a/drivers/net/wan/hostess_sv11.c +++ b/drivers/net/wan/hostess_sv11.c @@ -15,7 +15,7 @@ * The hardware does the bus handling to avoid the need for delays between * touching control registers. * - * Port B isnt wired (why - beats me) + * Port B isn't wired (why - beats me) * * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa khc@pm.waw.pl */ diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 6c571e1..f1e1643 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -178,7 +178,7 @@ * * The resulting average clock frequency (assuming 33.333 MHz oscillator) is: * freq = 66.666 MHz / (A + (B + 1) / (C + 1)) - * minumum freq = 66.666 MHz / (A + 1) + * minimum freq = 66.666 MHz / (A + 1) * maximum freq = 66.666 MHz / A * * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7 @@ -230,7 +230,7 @@ #define PKT_PIPE_MODE_WRITE 0x57

/* HDLC packet status values - desc->status */ -#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */ +#define ERR_SHUTDOWN 1 /* stop or shutdown occurrence */ #define ERR_HDLC_ALIGN 2 /* HDLC alignment error */ #define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */ #define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 70feb84..b7f2358 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -24,7 +24,7 @@ * * Linux driver notes: * Linux uses the device struct lmc_private to pass private information - * arround. + * around. * * The initialization portion of this driver (the lmc_reset() and the * lmc_dec_reset() functions, as well as the led controls and the diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h index 65d0197..01ad452 100644 --- a/drivers/net/wan/lmc/lmc_var.h +++ b/drivers/net/wan/lmc/lmc_var.h @@ -180,7 +180,7 @@ struct lmc___ctl {

/* - * Carefull, look at the data sheet, there's more to this + * Careful, look at the data sheet, there's more to this * structure than meets the eye. It should probably be: * * struct tulip_desc_t { @@ -380,7 +380,7 @@ struct lmc___softc { /* CSR6 settings */ #define OPERATION_MODE 0x00000200 /* Full Duplex */ #define PROMISC_MODE 0x00000040 /* Promiscuous Mode */ -#define RECIEVE_ALL 0x40000000 /* Recieve All */ +#define RECIEVE_ALL 0x40000000 /* Receive All */ #define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames */

/* Dec control registers CSR6 as well */ @@ -398,7 +398,7 @@ struct lmc___softc { #define TULIP_CMD_RECEIVEALL 0x40000000L /* (RW) Receivel all frames? */ #define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (21140) */ #define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (21140) */ -#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Foward (21140) */ +#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Forward (21140) */ #define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (21140) */ #define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (21140) */ #define TULIP_CMD_FULLDUPLEX 0x00000200L /* (RW) Full Duplex Mode */ diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index 9395686..0806232 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -542,7 +542,7 @@ static void z8530_dma_tx(struct z8530_channel *chan) z8530_tx(chan); return; } - /* This shouldnt occur in DMA mode */ + /* This shouldn't occur in DMA mode */ printk(KERN_ERR "DMA tx - bogus event!\n"); z8530_tx(chan); } @@ -1219,7 +1219,7 @@ static const char *z8530_type_name[]={ * @io: the port value in question * * Describe a Z8530 in a standard format. We must pass the I/O as - * the port offset isnt predictable. The main reason for this function + * the port offset isn't predictable. The main reason for this function * is to try and get a common format of report. */

@@ -1588,7 +1588,7 @@ static void z8530_rx_done(struct z8530_channel *c) unsigned long flags; /* - * Complete this DMA. Neccessary to find the length + * Complete this DMA. Necessary to find the length */ flags=claim_dma_lock(); @@ -1657,7 +1657,7 @@ static void z8530_rx_done(struct z8530_channel *c) * fifo length for this. Thus we want to flip to the new * buffer and then mess around copying and allocating * things. For the current case it doesn't matter but - * if you build a system where the sync irq isnt blocked + * if you build a system where the sync irq isn't blocked * by the kernel IRQ disable then you need only block the * sync IRQ for the RT_LOCK area. * diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index 12b84ed..727d728 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -378,7 +378,7 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m, * the device's state as sometimes we need to do a link-renew (the BS * wants us to renew a DHCP lease, for example). * - * In fact, doc says that everytime we get a link-up, we should do a + * In fact, doc says that every time we get a link-up, we should do a * DHCP negotiation... */ static @@ -675,7 +675,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code) * - the ack message wasn't formatted correctly * * The returned skb has been allocated with wimax_msg_to_user_alloc(), - * it contains the reponse in a netlink attribute and is ready to be + * it contains the response in a netlink attribute and is ready to be * passed up to user space with wimax_msg_to_user_send(). To access * the payload and its length, use wimax_msg_{data,len}() on the skb. * diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 65bc334..47cae71 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -654,7 +654,7 @@ void __i2400m_dev_reset_handle(struct work_struct *ws) if (result == -EUCLEAN) { /* * We come here because the reset during operational mode - * wasn't successully done and need to proceed to a bus + * wasn't successfully done and need to proceed to a bus * reset. For the dev_reset_handle() to be able to handle * the reset event later properly, we restore boot_mode back * to the state before previous reset. ie: just like we are @@ -755,7 +755,7 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery); * Alloc the command and ack buffers for boot mode * * Get the buffers needed to deal with boot mode messages. These - * buffers need to be allocated before the sdio recieve irq is setup. + * buffers need to be allocated before the sdio receive irq is setup. */ static int i2400m_bm_buf_alloc(struct i2400m *i2400m) diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 8b55a5b..85dadd5 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -54,7 +54,7 @@ * endpoint and read from it in the notification endpoint. In SDIO we * talk to it via the write address and read from the read address. * - * Upon entrance to boot mode, the device sends (preceeded with a few + * Upon entrance to boot mode, the device sends (preceded with a few * zero length packets (ZLPs) on the notification endpoint in USB) a * reboot barker (4 le32 words with the same value). We ack it by * sending the same barker to the device. The device acks with a @@ -1589,7 +1589,7 @@ int i2400m_dev_bootstrap(struct i2400m *i2400m, enum i2400m_bri flags) i2400m->fw_name = fw_name; ret = i2400m_fw_bootstrap(i2400m, fw, flags); release_firmware(fw); - if (ret >= 0) /* firmware loaded succesfully */ + if (ret >= 0) /* firmware loaded successfully */ break; i2400m->fw_name = NULL; } diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h index eb80243..6650fde 100644 --- a/drivers/net/wimax/i2400m/i2400m-usb.h +++ b/drivers/net/wimax/i2400m/i2400m-usb.h @@ -105,14 +105,14 @@ static inline void edc_init(struct edc *edc) * * @edc: pointer to error density counter. * @max_err: maximum number of errors we can accept over the timeframe - * @timeframe: lenght of the timeframe (in jiffies). + * @timeframe: length of the timeframe (in jiffies). * * Returns: !0 1 if maximum acceptable errors per timeframe has been * exceeded. 0 otherwise. * * This is way to determine if the number of acceptable errors per time * period has been exceeded. It is not accurate as there are cases in which - * this scheme will not work, for example if there are periodic occurences + * this scheme will not work, for example if there are periodic occurrences * of errors that straddle updates to the start time. This scheme is * sufficient for our usage. * @@ -204,7 +204,7 @@ enum { * usb_autopm_get/put_interface() barriers when executing * commands. See doc in i2400mu_suspend() for more information. * - * @rx_size_auto_shrink: if true, the rx_size is shrinked + * @rx_size_auto_shrink: if true, the rx_size is shrunk * automatically based on the average size of the received * transactions. This allows the receive code to allocate smaller * chunks of memory and thus reduce pressure on the memory diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 030cbfd..5eacc65 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -526,7 +526,7 @@ struct i2400m_barker_db; * * @barker: barker type that the device uses; this is initialized by * i2400m_is_boot_barker() the first time it is called. Then it - * won't change during the life cycle of the device and everytime + * won't change during the life cycle of the device and every time * a boot barker is received, it is just verified for it being the * same. * @@ -928,7 +928,7 @@ extern void i2400m_report_tlv_rf_switches_status( struct i2400m *, const struct i2400m_tlv_rf_switches_status *);

/* - * Helpers for firmware backwards compability + * Helpers for firmware backwards compatibility * * As we aim to support at least the firmware version that was * released with the previous kernel/driver release, some code will be diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c index 94742e1..2edd8fe 100644 --- a/drivers/net/wimax/i2400m/netdev.c +++ b/drivers/net/wimax/i2400m/netdev.c @@ -166,7 +166,7 @@ void i2400m_wake_tx_work(struct work_struct *ws) d_fnstart(3, dev, "(ws %p i2400m %p skb %p)\n", ws, i2400m, skb); result = -EINVAL; if (skb == NULL) { - dev_err(dev, "WAKE&TX: skb dissapeared!\n"); + dev_err(dev, "WAKE&TX: skb disappeared!\n"); goto out_put; } /* If we have, somehow, lost the connection after this was diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c index 9e02b90..b0dba35 100644 --- a/drivers/net/wimax/i2400m/op-rfkill.c +++ b/drivers/net/wimax/i2400m/op-rfkill.c @@ -27,7 +27,7 @@ * - report changes in the HW RF Kill switch [with * wimax_rfkill_{sw,hw}_report(), which happens when we detect those * indications coming through hardware reports]. We also do it on - * initialization to let the stack know the intial HW state. + * initialization to let the stack know the initial HW state. * * - implement indications from the stack to change the SW RF Kill * switch (coming from sysfs, the wimax stack or user space). @@ -73,7 +73,7 @@ int i2400m_radio_is(struct i2400m *i2400m, enum wimax_rf_state state) * Generic Netlink will call this function when a message is sent from * userspace to change the software RF-Kill switch status. * - * This function will set the device's sofware RF-Kill switch state to + * This function will set the device's software RF-Kill switch state to * match what is requested. * * NOTE: the i2400m has a strict state machine; we can only set the diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 844133b..2f94a87 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -349,7 +349,7 @@ error_no_waiter: * * For reports: We can't clone the original skb where the data is * because we need to send this up via netlink; netlink has to add - * headers and we can't overwrite what's preceeding the payload...as + * headers and we can't overwrite what's preceding the payload...as * it is another message. So we just dup them. */ static @@ -425,7 +425,7 @@ error_check: * * As in i2400m_rx_ctl(), we can't clone the original skb where the * data is because we need to send this up via netlink; netlink has to - * add headers and we can't overwrite what's preceeding the + * add headers and we can't overwrite what's preceding the * payload...as it is another message. So we just dup them. */ static diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c index 3f819ef..4b30ed1 100644 --- a/drivers/net/wimax/i2400m/tx.c +++ b/drivers/net/wimax/i2400m/tx.c @@ -149,7 +149,7 @@ * (with a moved message header to make sure it is size-aligned to * 16), TAIL room that was unusable (and thus is marked with a message * header that says 'skip this') and at the head of the buffer, an - * imcomplete message with a couple of payloads. + * incomplete message with a couple of payloads. * * N ___________________________________________________ * | | @@ -819,7 +819,7 @@ EXPORT_SYMBOL_GPL(i2400m_tx); * the FIF that is ready for transmission. * * It sets the state in @i2400m to indicate the bus-specific driver is - * transfering that message (i2400m->tx_msg_size). + * transferring that message (i2400m->tx_msg_size). * * Once the transfer is completed, call i2400m_tx_msg_sent(). * diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c index b58ec56..1fda46c 100644 --- a/drivers/net/wimax/i2400m/usb-fw.c +++ b/drivers/net/wimax/i2400m/usb-fw.c @@ -169,7 +169,7 @@ retry: * * Command can be a raw command, which requires no preparation (and * which might not even be following the command format). Checks that - * the right amount of data was transfered. + * the right amount of data was transferred. * * To satisfy USB requirements (no onstack, vmalloc or in data segment * buffers), we copy the command to i2400m->bm_cmd_buf and send it from diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c index a26483a..e325768 100644 --- a/drivers/net/wimax/i2400m/usb-rx.c +++ b/drivers/net/wimax/i2400m/usb-rx.c @@ -58,7 +58,7 @@ * a zillion reads; by serializing, we are throttling. * * - RX data processing can get heavy enough so that it is not - * appropiate for doing it in the USB callback; thus we run it in a + * appropriate for doing it in the USB callback; thus we run it in a * process context. * * We provide a read buffer of an arbitrary size (short of a page); if diff --git a/drivers/net/wimax/i2400m/usb-tx.c b/drivers/net/wimax/i2400m/usb-tx.c index c65b997..ac357ac 100644 --- a/drivers/net/wimax/i2400m/usb-tx.c +++ b/drivers/net/wimax/i2400m/usb-tx.c @@ -168,7 +168,7 @@ retry: /* * Get the next TX message in the TX FIFO and send it to the device * - * Note we exit the loop if i2400mu_tx() fails; that funtion only + * Note we exit the loop if i2400mu_tx() fails; that function only * fails on hard error (failing to tx a buffer not being one of them, * see its doc). * diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 57a79b0..4e5c7a1 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -1884,7 +1884,7 @@ static int airo_open(struct net_device *dev) { /* Make sure the card is configured. * Wireless Extensions may postpone config changes until the card * is open (to pipeline changes and speed-up card setup). If - * those changes are not yet commited, do it now - Jean II */ + * those changes are not yet committed, do it now - Jean II */ if (test_bit(FLAG_COMMIT, &ai->flags)) { disable_MAC(ai, 1); writeConfigRid(ai, 1); @@ -1992,7 +1992,7 @@ static int mpi_send_packet (struct net_device *dev) /* * Magic, the cards firmware needs a length count (2 bytes) in the host buffer * right after TXFID_HDR.The TXFID_HDR contains the status short so payloadlen - * is immediatly after it. ------------------------------------------------ + * is immediately after it. ------------------------------------------------ * |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA| * ------------------------------------------------ */ @@ -2006,7 +2006,7 @@ static int mpi_send_packet (struct net_device *dev) sizeof(wifictlhdr8023) + 2 ;

/* - * Firmware automaticly puts 802 header on so + * Firmware automatically puts 802 header on so * we don't need to account for it in the length */ if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled && @@ -2531,7 +2531,7 @@ static int mpi_init_descriptors (struct airo_info *ai) /* * We are setting up three things here: * 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid. - * 2) Map PCI memory for issueing commands. + * 2) Map PCI memory for issuing commands. * 3) Allocate memory (shared) to send and receive ethernet frames. */ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci) @@ -3947,7 +3947,7 @@ static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) {

if ( max_tries == -1 ) { airo_print_err(ai->dev->name, - "Max tries exceeded when issueing command"); + "Max tries exceeded when issuing command"); if (IN4500(ai, COMMAND) & COMMAND_BUSY) OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); return ERROR; @@ -4173,7 +4173,7 @@ done: }

/* Note, that we are using BAP1 which is also used by transmit, so - * make sure this isnt called when a transmit is happening */ + * make sure this isn't called when a transmit is happening */ static int PC4500_writerid(struct airo_info *ai, u16 rid, const void *pBuf, int len, int lock) { @@ -4776,7 +4776,7 @@ static int proc_stats_rid_open( struct inode *inode, if (!statsLabels[i]) continue; if (j+strlen(statsLabels[i])+16>4096) { airo_print_warn(apriv->dev->name, - "Potentially disasterous buffer overflow averted!"); + "Potentially disastrous buffer overflow averted!"); break; } j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i], diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index b761fec..ccc2eda 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -974,7 +974,7 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb) if (ar->rx_failover_missing <= 0) { /* * nested ar9170_rx call! - * termination is guranteed, even when the + * termination is guaranteed, even when the * combined frame also have a element with * a bad tag. */ diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c index 0dbfcf7..aa8d06b 100644 --- a/drivers/net/wireless/ath/ar9170/phy.c +++ b/drivers/net/wireless/ath/ar9170/phy.c @@ -424,7 +424,7 @@ static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz)

/* * initialize some phy regs from eeprom values in modal_header[] - * acc. to band and bandwith + * acc. to band and bandwidth */ static int ar9170_init_phy_from_eeprom(struct ar9170 *ar, bool is_2ghz, bool is_40mhz) diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h index d0a6640..0340153 100644 --- a/drivers/net/wireless/ath/ath5k/ani.h +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -27,7 +27,7 @@ #define ATH5K_ANI_RSSI_THR_HIGH 40 #define ATH5K_ANI_RSSI_THR_LOW 7

-/* maximum availabe levels */ +/* maximum available levels */ #define ATH5K_ANI_MAX_FIRSTEP_LVL 2 #define ATH5K_ANI_MAX_NOISE_IMM_LVL 1

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 4d7f21e..349a596 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1953,7 +1953,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)

#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3 /* We use FUDGE to make sure the next TBTT is ahead of the current TU. - * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer + * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer * configuration we need to make sure it is bigger than that. */

if (bc_tsf == -1) { @@ -1971,7 +1971,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) intval |= AR5K_BEACON_RESET_TSF; } else if (bc_tsf > hw_tsf) { /* - * beacon received, SW merge happend but HW TSF not yet updated. + * beacon received, SW merge happened but HW TSF not yet updated. * not possible to reconfigure timers yet, but next time we * receive a beacon with the same BSSID, the hardware will * automatically update the TSF and then we need to reconfigure @@ -2651,7 +2651,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, synchronize_irq(sc->irq); stop_tasklets(sc);

- /* Save ani mode and disable ANI durring + /* Save ani mode and disable ANI during * reset. If we don't we might get false * PHY error interrupts. */ ani_mode = ah->ah_sc->ani_state.ani_mode; diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 16b44ff..a8fcc94 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -51,7 +51,7 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, /* * Validate input * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends + * - A zero rate will put the HW into a mode where it continuously sends * noise on the channel, so it is important to avoid this. */ if (unlikely(tx_tries0 == 0)) { @@ -190,7 +190,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, /* * Validate input * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends + * - A zero rate will put the HW into a mode where it continuously sends * noise on the channel, so it is important to avoid this. */ if (unlikely(tx_tries0 == 0)) { @@ -300,7 +300,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, /* * Rates can be 0 as long as the retry count is 0 too. * A zero rate and nonzero retry count will put the HW into a mode where - * it continously sends noise on the channel, so it is important to + * it continuously sends noise on the channel, so it is important to * avoid this. */ if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || @@ -342,7 +342,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, ***********************/

/* - * Proccess the tx status descriptor on 5210/5211 + * Process the tx status descriptor on 5210/5211 */ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, struct ath5k_tx_status *ts) @@ -394,7 +394,7 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, }

/* - * Proccess a tx status descriptor on 5212 + * Process a tx status descriptor on 5212 */ static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, struct ath5k_tx_status *ts) @@ -519,7 +519,7 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, }

/* - * Proccess the rx status descriptor on 5210/5211 + * Process the rx status descriptor on 5210/5211 */ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, struct ath5k_rx_status *rs) @@ -602,7 +602,7 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, }

/* - * Proccess the rx status descriptor on 5212 + * Process the rx status descriptor on 5212 */ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index b6561f7..efb672c 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1080,7 +1080,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) * * To recreate the curves we read here the points and interpolate * later. Note that in most cases only 2 (higher and lower) curves are - * used (like RF5112) but vendors have the oportunity to include all + * used (like RF5112) but vendors have the opportunity to include all * 4 curves on eeprom. The final curve (higher power) has an extra * point for better accuracy like RF5112. */ @@ -1302,7 +1302,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) /* * Pd gain 0 is not the last pd gain * so it only has 2 pd points. - * Continue wih pd gain 1. + * Continue with pd gain 1. */ pcinfo->pwr_i[1] = (val >> 10) & 0x1f;

diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c index 66598a0..3c44689 100644 --- a/drivers/net/wireless/ath/ath5k/pci.c +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -57,7 +57,7 @@ static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz) *csz = (int)u8tmp;

/* - * This check was put in to avoid "unplesant" consequences if + * This check was put in to avoid "unpleasant" consequences if * the bootrom has not fully initialized all PCI devices. * Sometimes the cache line size register is not set */ diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index a702817..d9b3f82 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -472,7 +472,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) }

/* - * The AR5210 uses promiscous mode to detect radar activity + * The AR5210 uses promiscuous mode to detect radar activity */ if (ah->ah_version == AR5K_AR5210 && (filter & AR5K_RX_FILTER_RADARERR)) { @@ -706,8 +706,8 @@ ath5k_check_timer_win(int a, int b, int window, int intval) * The need for this function arises from the fact that we have 4 separate * HW timer registers (TIMER0 - TIMER3), which are closely related to the * next beacon target time (NBTT), and that the HW updates these timers - * seperately based on the current TSF value. The hardware increments each - * timer by the beacon interval, when the local TSF coverted to TU is equal + * separately based on the current TSF value. The hardware increments each + * timer by the beacon interval, when the local TSF converted to TU is equal * to the value stored in the timer. * * The reception of a beacon with the same BSSID can update the local HW TSF diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 62ce2f4..5544191 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -335,11 +335,11 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, * http://madwifi-project.org/ticket/1659 * with various measurements and diagrams * - * TODO: Deal with power drops due to probes by setting an apropriate + * TODO: Deal with power drops due to probes by setting an appropriate * tx power on the probe packets ! Make this part of the calibration process. */

-/* Initialize ah_gain durring attach */ +/* Initialize ah_gain during attach */ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) { /* Initialize the gain optimization values */ @@ -1049,7 +1049,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, **************************/

/* - * Convertion needed for RF5110 + * Conversion needed for RF5110 */ static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) { @@ -1088,7 +1088,7 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, }

/* - * Convertion needed for 5111 + * Conversion needed for 5111 */ static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, struct ath5k_athchan_2ghz *athchan) @@ -2201,7 +2201,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax, /* * Get the surrounding per-channel power calibration piers * for a given frequency so that we can interpolate between - * them and come up with an apropriate dataset for our current + * them and come up with an appropriate dataset for our current * channel. */ static void @@ -2618,7 +2618,7 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah) /* * Set the gain boundaries and create final Power to PDADC table * - * We can have up to 4 pd curves, we need to do a simmilar process + * We can have up to 4 pd curves, we need to do a similar process * as we do for RF5112. This time we don't have an edge_flag but we * set the gain boundaries on a separate register. */ @@ -2826,13 +2826,13 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, u32 target = channel->center_freq; int pdg, i;

- /* Get surounding freq piers for this channel */ + /* Get surrounding freq piers for this channel */ ath5k_get_chan_pcal_surrounding_piers(ah, channel, &pcinfo_L, &pcinfo_R);

/* Loop over pd gain curves on - * surounding freq piers by index */ + * surrounding freq piers by index */ for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {

/* Fill curves in reverse order @@ -2923,7 +2923,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, }

/* Interpolate between curves - * of surounding freq piers to + * of surrounding freq piers to * get the final curve for this * pd gain. Re-use tmpL for interpolation * output */ @@ -2947,7 +2947,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,

/* Fill min and max power levels for this * channel by interpolating the values on - * surounding channels to complete the dataset */ + * surrounding channels to complete the dataset */ ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target, (s16) pcinfo_L->freq, (s16) pcinfo_R->freq, @@ -3179,7 +3179,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,

/* FIXME: TPC scale reduction */

- /* Get surounding channels for per-rate power table + /* Get surrounding channels for per-rate power table * calibration */ ath5k_get_rate_pcal_data(ah, channel, &rate_info);

diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index e1c9abd..d12b827 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -132,8 +132,8 @@ * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). - * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i - * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what + * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i + * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. */ #define AR5K_BSR 0x002c /* Register Address */ @@ -283,7 +283,7 @@ */ #define AR5K_ISR 0x001c /* Register Address [5210] */ #define AR5K_PISR 0x0080 /* Register Address [5211+] */ -#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */ #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ @@ -372,12 +372,12 @@ /* * Interrupt Mask Registers * - * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary + * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. */ #define AR5K_IMR 0x0020 /* Register Address [5210] */ #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ -#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/ #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ @@ -895,7 +895,7 @@ #define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ #define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ -#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/ #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index ffcf44a..106c0b0 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -142,7 +142,7 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)

/** * ar5008_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios - * @ah: atheros hardware stucture + * @ah: atheros hardware structure * @chan: * * For the external AR2133/AR5133 radios, takes the MHz channel value and set diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 4a92718..6eadf97 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3240,7 +3240,7 @@ static int ar9300_compress_decision(struct ath_hw *ah, eep = ar9003_eeprom_struct_find_by_id(reference); if (eep == NULL) { ath_dbg(common, ATH_DBG_EEPROM, - "cant find reference eeprom struct %d\n", + "can't find reference eeprom struct %d\n", reference); return -1; } diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index c41ab8c..62e139a3 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -360,7 +360,7 @@ ret: * HTC Messages are handled directly here and the obtained SKB * is freed. * - * Sevice messages (Data, WMI) passed to the corresponding + * Service messages (Data, WMI) passed to the corresponding * endpoint RX handlers, which have to free the SKB. */ void ath9k_htc_rx_msg(struct htc_target *htc_handle, diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index e83128c..9c65459 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -44,7 +44,7 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz) *csz = (int)u8tmp;

/* - * This check was put in to avoid "unplesant" consequences if + * This check was put in to avoid "unpleasant" consequences if * the bootrom has not fully initialized all PCI devices. * Sometimes the cache line size register is not set */ diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index a3241cd..4c0d36a 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -792,7 +792,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,

tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; } else { - /* Set the choosen rate. No RTS for first series entry. */ + /* Set the chosen rate. No RTS for first series entry. */ ath_rc_rate_set_series(rate_table, &rates[i++], txrc, try_per_rate, rix, 0); } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 26734e5..88fa7fd 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -628,8 +628,8 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf, (u32)ATH_AMPDU_LIMIT_MAX);

/* - * h/w can accept aggregates upto 16 bit lengths (65535). - * The IE, however can hold upto 65536, which shows up here + * h/w can accept aggregates up to 16 bit lengths (65535). + * The IE, however can hold up to 65536, which shows up here * as zero. Ignore 65536 since we are constrained by hw. */ if (tid->an->maxampdu) diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index c6a5fae..c01c43d 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -161,7 +161,7 @@ struct carl9170_sta_tid { * Naturally: The higher the limit, the faster the device CAN send. * However, even a slight over-commitment at the wrong time and the * hardware is doomed to send all already-queued frames at suboptimal - * rates. This in turn leads to an enourmous amount of unsuccessful + * rates. This in turn leads to an enormous amount of unsuccessful * retries => Latency goes up, whereas the throughput goes down. CRASH! */ #define CARL9170_NUM_TX_LIMIT_HARD ((AR9170_TXQ_DEPTH * 3) / 2) diff --git a/drivers/net/wireless/ath/carl9170/phy.c b/drivers/net/wireless/ath/carl9170/phy.c index b6b0de6..b6ae0e1 100644 --- a/drivers/net/wireless/ath/carl9170/phy.c +++ b/drivers/net/wireless/ath/carl9170/phy.c @@ -427,7 +427,7 @@ static u32 carl9170_def_val(u32 reg, bool is_2ghz, bool is_40mhz)

/* * initialize some phy regs from eeprom values in modal_header[] - * acc. to band and bandwith + * acc. to band and bandwidth */ static int carl9170_init_phy_from_eeprom(struct ar9170 *ar, bool is_2ghz, bool is_40mhz) diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c index 84866a4..ec21ea9 100644 --- a/drivers/net/wireless/ath/carl9170/rx.c +++ b/drivers/net/wireless/ath/carl9170/rx.c @@ -849,7 +849,7 @@ static void carl9170_rx_stream(struct ar9170 *ar, void *buf, unsigned int len) /* * nested carl9170_rx_stream call! * - * termination is guranteed, even when the + * termination is guaranteed, even when the * combined frame also have an element with * a bad tag. */ diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index f82c400..2fb53d0 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -430,7 +430,7 @@ static void carl9170_usb_rx_complete(struct urb *urb) * The system is too slow to cope with * the enormous workload. We have simply * run out of active rx urbs and this - * unfortunatly leads to an unpredictable + * unfortunately leads to an unpredictable * device. */

diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c index 183c282..cc11d66 100644 --- a/drivers/net/wireless/ath/hw.c +++ b/drivers/net/wireless/ath/hw.c @@ -86,7 +86,7 @@ * IFRAME-01: 0110 * * An easy eye-inspeciton of this already should tell you that this frame - * will not pass our check. This is beacuse the bssid_mask tells the + * will not pass our check. This is because the bssid_mask tells the * hardware to only look at the second least significant bit and the * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB * as 1, which does not match 0. diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index f828f29..0e1b879 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -268,7 +268,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, }

/* - * If a country IE has been recieved check its rule for this + * If a country IE has been received check its rule for this * channel first before enabling active scan. The passive scan * would have been enforced by the initial processing of our * custom regulatory domain. @@ -476,7 +476,7 @@ ath_regd_init_wiphy(struct ath_regulatory *reg, wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY; } else { /* - * This gets applied in the case of the absense of CRDA, + * This gets applied in the case of the absence of CRDA, * it's our own custom world regulatory domain, similar to * cfg80211's but we enable passive scanning. */ diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 46e382e..39a11e8 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -439,7 +439,7 @@ static u8 mac_reader[] = { };

struct atmel_private { - void *card; /* Bus dependent stucture varies for PCcard */ + void *card; /* Bus dependent structure varies for PCcard */ int (*present_callback)(void *); /* And callback which uses it */ char firmware_id[32]; AtmelFWType firmware_type; @@ -3895,7 +3895,7 @@ static int reset_atmel_card(struct net_device *dev)

This routine is also responsible for initialising some hardware-specific fields in the atmel_private structure, - including a copy of the firmware's hostinfo stucture + including a copy of the firmware's hostinfo structure which is the route into the rest of the firmware datastructures. */

struct atmel_private *priv = netdev_priv(dev); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index c96e19d..0526351 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -99,7 +99,7 @@ static void atmel_detach(struct pcmcia_device *link) }

/* Call-back function to interrogate PCMCIA-specific information - about the current existance of the card */ + about the current existence of the card */ static int card_present(void *arg) { struct pcmcia_device *link = (struct pcmcia_device *)arg; diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index bd4cb75..229f438 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -648,7 +648,7 @@ struct b43_request_fw_context { char errors[B43_NR_FWTYPES][128]; /* Temporary buffer for storing the firmware name. */ char fwname[64]; - /* A fatal error occured while requesting. Firmware reqest + /* A fatal error occurred while requesting. Firmware reqest * can not continue, as any other reqest will also fail. */ int fatal_failure; }; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 57eb5b6..d59b016 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4010,7 +4010,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev) b43_mac_enable(dev); b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);

- /* Start maintainance work */ + /* Start maintenance work */ b43_periodic_tasks_setup(dev);

b43_leds_init(dev); diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h index 8569fdd..5413c90 100644 --- a/drivers/net/wireless/b43/phy_g.h +++ b/drivers/net/wireless/b43/phy_g.h @@ -164,7 +164,7 @@ struct b43_phy_g { /* Current Interference Mitigation mode */ int interfmode; /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: + * Each value in the stack is laid out as follows: * bit 0-11: offset * bit 12-15: register ID * bit 16-32: value diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h index 001e841..e789a89 100644 --- a/drivers/net/wireless/b43/phy_n.h +++ b/drivers/net/wireless/b43/phy_n.h @@ -703,7 +703,7 @@ #define B43_NPHY_CHAN_ESTHANG B43_PHY_N(0x21D) /* Channel estimate hang */ #define B43_NPHY_FINERX2_CGC B43_PHY_N(0x221) /* Fine RX 2 clock gate control */ #define B43_NPHY_FINERX2_CGC_DECGC 0x0008 /* Decode gated clocks */ -#define B43_NPHY_TXPCTL_INIT B43_PHY_N(0x222) /* TX power controll init */ +#define B43_NPHY_TXPCTL_INIT B43_PHY_N(0x222) /* TX power control init */ #define B43_NPHY_TXPCTL_INIT_PIDXI1 0x00FF /* Power index init 1 */ #define B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT 0 #define B43_NPHY_PAPD_EN0 B43_PHY_N(0x297) /* PAPD Enable0 TBD */ diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h index c81b2f5..23583be 100644 --- a/drivers/net/wireless/b43legacy/b43legacy.h +++ b/drivers/net/wireless/b43legacy/b43legacy.h @@ -488,7 +488,7 @@ struct b43legacy_phy { /* Current Interference Mitigation mode */ int interfmode; /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: + * Each value in the stack is laid out as follows: * bit 0-11: offset * bit 12-15: register ID * bit 16-32: value diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 18d63f5..3d05dc1 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -2359,7 +2359,7 @@ int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], }

-/* Translate our list of Access Points & Stations to a card independant +/* Translate our list of Access Points & Stations to a card independent * format that the Wireless Tools will understand - Jean II */ int prism2_ap_translate_scan(struct net_device *dev, struct iw_request_info *info, char *buffer) diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h index 655ceeb..334e2d0 100644 --- a/drivers/net/wireless/hostap/hostap_ap.h +++ b/drivers/net/wireless/hostap/hostap_ap.h @@ -114,7 +114,7 @@ struct sta_info { * has passed since last received frame from the station, a nullfunc data * frame is sent to the station. If this frame is not acknowledged and no other * frames have been received, the station will be disassociated after - * AP_DISASSOC_DELAY. Similarily, a the station will be deauthenticated after + * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with * max inactivity timer. */ #define AP_MAX_INACTIVITY_SEC (5 * 60) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 6038633..12de464 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1945,7 +1945,7 @@ static char * __prism2_translate_scan(local_info_t *local, }

-/* Translate scan data returned from the card to a card independant +/* Translate scan data returned from the card to a card independent * format that the Wireless Tools will understand - Jean II */ static inline int prism2_translate_scan(local_info_t *local, struct iw_request_info *info, @@ -2043,7 +2043,7 @@ static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, * until results are ready for various reasons. * First, managing wait queues is complex and racy * (there may be multiple simultaneous callers). - * Second, we grab some rtnetlink lock before comming + * Second, we grab some rtnetlink lock before coming * here (in dev_ioctl()). * Third, the caller can wait on the Wireless Event * - Jean II */ diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index 1c66b3c..88dc6a5 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -853,7 +853,7 @@ struct local_info { struct work_struct comms_qual_update;

/* RSSI to dBm adjustment (for RX descriptor fields) */ - int rssi_to_dBm; /* substract from RSSI to get approximate dBm value */ + int rssi_to_dBm; /* subtract from RSSI to get approximate dBm value */

/* BSS list / protected by local->lock */ struct list_head bss_list; diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 4b97f91..4430775 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -63,7 +63,7 @@ When data is sent to the firmware, the first TBD is used to indicate to the firmware if a Command or Data is being sent. If it is Command, all of the command information is contained within the physical address referred to by the TBD. If it is Data, the first TBD indicates the type of data packet, number -of fragments, etc. The next TBD then referrs to the actual packet location. +of fragments, etc. The next TBD then refers to the actual packet location.

The Tx flow cycle is as follows:

diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 160881f..42c3fe3 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -1181,7 +1181,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv) /* * The following adds a new attribute to the sysfs representation * of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/) - * used for controling the debug level. + * used for controlling the debug level. * * See the level definitions in ipw for details. */ @@ -3763,7 +3763,7 @@ static int ipw_queue_tx_init(struct ipw_priv *priv,

q->txb = kmalloc(sizeof(q->txb[0]) * count, GFP_KERNEL); if (!q->txb) { - IPW_ERROR("vmalloc for auxilary BD structures failed\n"); + IPW_ERROR("vmalloc for auxiliary BD structures failed\n"); return -ENOMEM; }

@@ -5581,7 +5581,7 @@ static int ipw_find_adhoc_network(struct ipw_priv *priv, return 0; }

- /* Verify privacy compatability */ + /* Verify privacy compatibility */ if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) != ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) { IPW_DEBUG_MERGE("Network '%s (%pM)' excluded " @@ -5808,7 +5808,7 @@ static int ipw_best_network(struct ipw_priv *priv, return 0; }

- /* Verify privacy compatability */ + /* Verify privacy compatibility */ if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) != ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) { IPW_DEBUG_ASSOC("Network '%s (%pM)' excluded " @@ -8184,7 +8184,7 @@ static void ipw_handle_promiscuous_rx(struct ipw_priv *priv, static int is_network_packet(struct ipw_priv *priv, struct libipw_hdr_4addr *header) { - /* Filter incoming packets to determine if they are targetted toward + /* Filter incoming packets to determine if they are targeted toward * this network, discarding packets coming from ourselves */ switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: /* Header: Dest. | Source | BSSID */ @@ -8340,9 +8340,9 @@ static void ipw_handle_mgmt_packet(struct ipw_priv *priv, }

/* - * Main entry function for recieving a packet with 80211 headers. This + * Main entry function for receiving a packet with 80211 headers. This * should be called when ever the FW has notified us that there is a new - * skb in the recieve queue. + * skb in the receive queue. */ static void ipw_rx(struct ipw_priv *priv) { @@ -8683,7 +8683,7 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option) * functions defined in ipw_main to provide the HW interaction. * * The exception to this is the use of the ipw_get_ordinal() - * function used to poll the hardware vs. making unecessary calls. + * function used to poll the hardware vs. making unnecessary calls. * */

@@ -10419,7 +10419,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv,

memset(&dummystats, 0, sizeof(dummystats));

- /* Filtering of fragment chains is done agains the first fragment */ + /* Filtering of fragment chains is done against the first fragment */ hdr = (void *)txb->fragments[0]->data; if (libipw_is_management(le16_to_cpu(hdr->frame_control))) { if (filter & IPW_PROM_NO_MGMT) diff --git a/drivers/net/wireless/ipw2x00/libipw_rx.c b/drivers/net/wireless/ipw2x00/libipw_rx.c index 0de1b18..e5ad76c 100644 --- a/drivers/net/wireless/ipw2x00/libipw_rx.c +++ b/drivers/net/wireless/ipw2x00/libipw_rx.c @@ -925,7 +925,7 @@ drop_free: static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };

/* -* Make ther structure we read from the beacon packet has +* Make the structure we read from the beacon packet to have * the right values */ static int libipw_verify_qos_info(struct libipw_qos_information_element diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index d418b64..1c3a8cb 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -1030,7 +1030,7 @@ int iwl_legacy_apm_init(struct iwl_priv *priv) /* * Enable HAP INTA (interrupt from management bus) to * wake device's PCI Express link L1a -> L0s - * NOTE: This is no-op for 3945 (non-existant bit) + * NOTE: This is no-op for 3945 (non-existent bit) */ iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); diff --git a/drivers/net/wireless/iwlegacy/iwl-fh.h b/drivers/net/wireless/iwlegacy/iwl-fh.h index 4e20c7e..6e60918 100644 --- a/drivers/net/wireless/iwlegacy/iwl-fh.h +++ b/drivers/net/wireless/iwlegacy/iwl-fh.h @@ -436,7 +436,7 @@ * @finished_rb_num [0:11] - Indicates the index of the current RB * in which the last frame was written to * @finished_fr_num [0:11] - Indicates the index of the RX Frame - * which was transfered + * which was transferred */ struct iwl_rb_status { __le16 closed_rb_num; diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c index 60f597f..353234a 100644 --- a/drivers/net/wireless/iwlegacy/iwl-scan.c +++ b/drivers/net/wireless/iwlegacy/iwl-scan.c @@ -143,7 +143,7 @@ static void iwl_legacy_do_scan_abort(struct iwl_priv *priv) IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); iwl_legacy_force_scan_end(priv); } else - IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n"); + IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); }

/** diff --git a/drivers/net/wireless/iwlegacy/iwl-sta.c b/drivers/net/wireless/iwlegacy/iwl-sta.c index 47c9da3..66f0fb2 100644 --- a/drivers/net/wireless/iwlegacy/iwl-sta.c +++ b/drivers/net/wireless/iwlegacy/iwl-sta.c @@ -110,7 +110,7 @@ static int iwl_legacy_process_add_sta_resp(struct iwl_priv *priv, /* * XXX: The MAC address in the command buffer is often changed from * the original sent to the device. That is, the MAC address - * written to the command buffer often is not the same MAC adress + * written to the command buffer often is not the same MAC address * read from the command buffer when the command returns. This * issue has not yet been resolved and this debugging is left to * observe the problem. diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c index b5cb3be..ed0148d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c @@ -69,7 +69,7 @@ int iwl_alloc_isr_ict(struct iwl_priv *priv) if (!priv->_agn.ict_tbl_vir) return -ENOMEM;

- /* align table to PAGE_SIZE boundry */ + /* align table to PAGE_SIZE boundary */ priv->_agn.aligned_ict_tbl_dma = ALIGN(priv->_agn.ict_tbl_dma, PAGE_SIZE);

IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n", diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 6c30fa6..bafbe57 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1040,7 +1040,7 @@ int iwl_apm_init(struct iwl_priv *priv) /* * Enable HAP INTA (interrupt from management bus) to * wake device's PCI Express link L1a -> L0s - * NOTE: This is no-op for 3945 (non-existant bit) + * NOTE: This is no-op for 3945 (non-existent bit) */ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 55b8370..474009a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -436,7 +436,7 @@ * @finished_rb_num [0:11] - Indicates the index of the current RB * in which the last frame was written to * @finished_fr_num [0:11] - Indicates the index of the RX Frame - * which was transfered + * which was transferred */ struct iwl_rb_status { __le16 closed_rb_num; diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 3a4d9e6..914c77e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -143,7 +143,7 @@ static void iwl_do_scan_abort(struct iwl_priv *priv) IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); iwl_force_scan_end(priv); } else - IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n"); + IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); }

/** diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c index 907ac89..1cabcb3 100644 --- a/drivers/net/wireless/iwmc3200wifi/hal.c +++ b/drivers/net/wireless/iwmc3200wifi/hal.c @@ -57,7 +57,7 @@ * This is due to the fact the host talks exclusively * to the UMAC and so there needs to be a special UMAC * command for talking to the LMAC. - * This is how a wifi command is layed out: + * This is how a wifi command is laid out: * ------------------------ * | iwm_udma_out_wifi_hdr | * ------------------------ @@ -72,7 +72,7 @@ * Those commands are handled by the device's bootrom, * and are typically sent when the UMAC and the LMAC * are not yet available. - * * This is how a non-wifi command is layed out: + * * This is how a non-wifi command is laid out: * --------------------------- * | iwm_udma_out_nonwifi_hdr | * --------------------------- diff --git a/drivers/net/wireless/iwmc3200wifi/tx.c b/drivers/net/wireless/iwmc3200wifi/tx.c index 3216621..be98074 100644 --- a/drivers/net/wireless/iwmc3200wifi/tx.c +++ b/drivers/net/wireless/iwmc3200wifi/tx.c @@ -197,7 +197,7 @@ int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb) spin_lock(&iwm->tx_credit.lock);

if (!iwm_tx_credit_ok(iwm, id, nb)) { - IWM_DBG_TX(iwm, DBG, "No credit avaliable for pool[%d]\n", id); + IWM_DBG_TX(iwm, DBG, "No credit available for pool[%d]\n", id); ret = -ENOSPC; goto out; } diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README index 60fd1af..1453eec 100644 --- a/drivers/net/wireless/libertas/README +++ b/drivers/net/wireless/libertas/README @@ -70,7 +70,7 @@ rdrf These commands are used to read the MAC, BBP and RF registers from the card. These commands take one parameter that specifies the offset location that is to be read. This parameter must be specified in - hexadecimal (its possible to preceed preceding the number with a "0x"). + hexadecimal (its possible to precede preceding the number with a "0x").

Path: /sys/kernel/debug/libertas_wireless/ethX/registers/

@@ -84,7 +84,7 @@ wrrf These commands are used to write the MAC, BBP and RF registers in the card. These commands take two parameters that specify the offset location and the value that is to be written. This parameters must - be specified in hexadecimal (its possible to preceed the number + be specified in hexadecimal (its possible to precede the number with a "0x").

Usage: diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 30ef035..5caa2ac 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -1350,7 +1350,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, * we remove all keys like in the WPA/WPA2 setup, * we just don't set RSN. * - * Therefore: fall-throught + * Therefore: fall-through */ case WLAN_CIPHER_SUITE_TKIP: case WLAN_CIPHER_SUITE_CCMP: diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index fc81211..8712cb2 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -913,7 +913,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out3; }

- /* Clear any interrupt cause that happend while sending + /* Clear any interrupt cause that happened while sending * firmware/initializing card */ if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK); if_cs_enable_ints(card); diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h index 8b1417d..d2ac1dc 100644 --- a/drivers/net/wireless/libertas/if_spi.h +++ b/drivers/net/wireless/libertas/if_spi.h @@ -66,7 +66,7 @@ #define IF_SPI_HOST_INT_CTRL_REG 0x40 /* Host interrupt controller reg */

#define IF_SPI_CARD_INT_CAUSE_REG 0x44 /* Card interrupt cause reg */ -#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interupt status reg */ +#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */ #define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */ #define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 56f439d..f4f4257 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -62,7 +62,7 @@ MODULE_PARM_DESC(fake_hw_scan, "Install fake (no-op) hw-scan handler"); * an intersection to occur but each device will still use their * respective regulatory requested domains. Subsequent radios will * use the resulting intersection. - * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We acomplish + * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We accomplish * this by using a custom beacon-capable regulatory domain for the first * radio. All other device world roam. * @HWSIM_REGTEST_CUSTOM_WORLD: Used for testing the custom world regulatory diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index b4772c1..3c7877a 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -1031,7 +1031,7 @@ int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, else buf.tsc[4] = 0x10;

- /* Wait upto 100ms for tx queue to empty */ + /* Wait up to 100ms for tx queue to empty */ for (k = 100; k > 0; k--) { udelay(1000); ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index 356e6bb..a946991 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -465,7 +465,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,

if (slot < 0) { /* - * The device supports the choosen algorithm, but the + * The device supports the chosen algorithm, but the * firmware does not provide enough key slots to store * all of them. * But encryption offload for outgoing frames is always diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index 7ecc0bd..6d9204fe 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -287,7 +287,7 @@ static void p54spi_power_on(struct p54s_priv *priv) enable_irq(gpio_to_irq(p54spi_gpio_irq));

/* - * need to wait a while before device can be accessed, the lenght + * need to wait a while before device can be accessed, the length * is just a guess */ msleep(10); diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index d44f8e2..266d45b 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -113,7 +113,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes * and add WDS address information */ if (likely(((long) skb->data & 0x03) | init_wds)) { - /* get the number of bytes to add and re-allign */ + /* get the number of bytes to add and re-align */ offset = (4 - (long) skb->data) & 0x03; offset += init_wds ? 6 : 0;

@@ -342,7 +342,7 @@ islpci_eth_receive(islpci_private *priv) priv->pci_map_rx_address[index], MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);

- /* update the skb structure and allign the buffer */ + /* update the skb structure and align the buffer */ skb_put(skb, size); if (offset) { /* shift the buffer allocation offset bytes to get the right frame */ diff --git a/drivers/net/wireless/rayctl.h b/drivers/net/wireless/rayctl.h index 49d9b26..d7646f2 100644 --- a/drivers/net/wireless/rayctl.h +++ b/drivers/net/wireless/rayctl.h @@ -578,7 +578,7 @@ struct tx_msg { UCHAR var[1]; };

-/****** ECF Receive Control Stucture (RCS) Area at Shared RAM offset 0x0800 */ +/****** ECF Receive Control Structure (RCS) Area at Shared RAM offset 0x0800 */ /* Structures for command specific parameters (rcs.var) */ struct rx_packet_cmd { UCHAR rx_data_ptr[2]; diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 70b9abb..8fbc5fa 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -616,7 +616,7 @@ * READ_CONTROL: 0 write BBP, 1 read BBP * BUSY: ASIC is busy executing BBP commands * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks - * BBP_RW_MODE: 0 serial, 1 paralell + * BBP_RW_MODE: 0 serial, 1 parallel */ #define BBP_CSR_CFG 0x101c #define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 2ee6ceb..dbf74d0 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1518,7 +1518,7 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, if (rf->channel > 14) { /* * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). + * make it a positive value (Minimum value is -7). * However this means that values between 0 and 7 have * double meaning, and we should set a 7DBm boost flag. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index a3940d7..7f10239 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -484,13 +484,13 @@ struct rt2x00intf_conf { enum nl80211_iftype type;

/* - * TSF sync value, this is dependant on the operation type. + * TSF sync value, this is dependent on the operation type. */ enum tsf_sync sync;

/* - * The MAC and BSSID addressess are simple array of bytes, - * these arrays are little endian, so when sending the addressess + * The MAC and BSSID addresses are simple array of bytes, + * these arrays are little endian, so when sending the addresses * to the drivers, copy the it into a endian-signed variable. * * Note that all devices (except rt2500usb) have 32 bits @@ -1131,7 +1131,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue); * @drop: True to drop all pending frames. * * This function will flush the queue. After this call - * the queue is guarenteed to be empty. + * the queue is guaranteed to be empty. */ void rt2x00queue_flush_queue(struct data_queue *queue, bool drop);

diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index e7f67d5..9416e36 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -60,7 +60,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, * Note that when NULL is passed as address we will send * 00:00:00:00:00 to the device to clear the address. * This will prevent the device being confused when it wants - * to ACK frames or consideres itself associated. + * to ACK frames or considers itself associated. */ memset(conf.mac, 0, sizeof(conf.mac)); if (mac) diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 5e9074b..3f5688f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -237,7 +237,7 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, }

/* - * NOTE: Always count the payload as transfered, + * NOTE: Always count the payload as transferred, * even when alignment was set to zero. This is required * for determining the correct offset for the ICV data. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h index 5d6e0b8..063ebcc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dump.h +++ b/drivers/net/wireless/rt2x00/rt2x00dump.h @@ -51,7 +51,7 @@ * [rt2x00dump header][hardware descriptor][ieee802.11 frame] * * rt2x00dump header: The description of the dumped frame, as well as - * additional information usefull for debugging. See &rt2x00dump_hdr. + * additional information useful for debugging. See &rt2x00dump_hdr. * hardware descriptor: Descriptor that was used to receive or transmit * the frame. * ieee802.11 frame: The actual frame that was received or transmitted. diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c975b0a..29abfde 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -283,7 +283,7 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) /** * While scanning, link tuning is disabled. By default * the most sensitive settings will be used to make sure - * that all beacons and probe responses will be recieved + * that all beacons and probe responses will be received * during the scan. */ if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 4b3c70e..4358051 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -546,7 +546,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, }

/* - * When DMA allocation is required we should guarentee to the + * When DMA allocation is required we should guarantee to the * driver that the DMA is aligned to a 4-byte boundary. * However some drivers require L2 padding to pad the payload * rather then the header. This could be a requirement for @@ -689,7 +689,7 @@ void rt2x00queue_for_each_entry(struct data_queue *queue, spin_unlock_irqrestore(&queue->index_lock, irqflags);

/* - * Start from the TX done pointer, this guarentees that we will + * Start from the TX done pointer, this guarantees that we will * send out all frames in the correct order. */ if (index_start < index_end) { @@ -883,7 +883,7 @@ void rt2x00queue_flush_queue(struct data_queue *queue, bool drop) }

/* - * Check if driver supports flushing, we can only guarentee + * Check if driver supports flushing, we can only guarantee * full support for flushing if the driver is able * to cancel all pending frames (drop = true). */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 0c8b0c6..217861f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -344,8 +344,8 @@ struct txentry_desc { * only be touched after the device has signaled it is done with it. * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting * for the signal to start sending. - * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured - * while transfering the data to the hardware. No TX status report will + * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occurred + * while transferring the data to the hardware. No TX status report will * be expected from the hardware. * @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and * returned. It is now waiting for the status reporting before the @@ -365,7 +365,7 @@ enum queue_entry_flags { * @flags: Entry flags, see &enum queue_entry_flags. * @queue: The data queue (&struct data_queue) to which this entry belongs. * @skb: The buffer which is currently being transmitted (for TX queue), - * or used to directly recieve data in (for RX queue). + * or used to directly receive data in (for RX queue). * @entry_idx: The entry index number. * @priv_data: Private data belonging to this queue entry. The pointer * points to data specific to a particular driver and queue type. @@ -388,7 +388,7 @@ struct queue_entry { * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is * owned by the hardware then the queue is considered to be full. * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been - * transfered to the hardware. + * transferred to the hardware. * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by * the hardware and for which we need to run the txdone handler. If this * entry is not owned by the hardware the queue is considered to be empty. @@ -627,7 +627,7 @@ static inline int rt2x00queue_threshold(struct data_queue *queue) }

/** - * rt2x00queue_status_timeout - Check if a timeout occured for STATUS reports + * rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports * @queue: Queue to check. */ static inline int rt2x00queue_status_timeout(struct data_queue *queue) @@ -637,7 +637,7 @@ static inline int rt2x00queue_status_timeout(struct data_queue *queue) }

/** - * rt2x00queue_timeout - Check if a timeout occured for DMA transfers + * rt2x00queue_timeout - Check if a timeout occurred for DMA transfers * @queue: Queue to check. */ static inline int rt2x00queue_dma_timeout(struct data_queue *queue) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index fbe735f..36f388f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -173,7 +173,7 @@ static void rt2x00usb_work_txdone_entry(struct queue_entry *entry) /* * If the transfer to hardware succeeded, it does not mean the * frame was send out correctly. It only means the frame - * was succesfully pushed to the hardware, we have no + * was successfully pushed to the hardware, we have no * way to determine the transmission status right now. * (Only indirectly by looking at the failed TX counters * in the register). diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 6aaf51f..e11c759 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -400,7 +400,7 @@ void rt2x00usb_flush_queue(struct data_queue *queue); * @rt2x00dev: Pointer to &struct rt2x00_dev * * Check the health of the USB communication and determine - * if timeouts have occured. If this is the case, this function + * if timeouts have occurred. If this is the case, this function * will reset all communication to restore functionality again. */ void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index bb0c781..0d7d93e 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -520,7 +520,7 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw, *because hw will nerver use hw_rate *when tcb_desc->use_driver_rate = false *so we never set highest N rate here, - *and N rate will all be controled by FW + *and N rate will all be controlled by FW *when tcb_desc->use_driver_rate = false */ if (rtlmac->ht_enable) { diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 9cd7703..5938f6e 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -395,7 +395,7 @@ static void rtl_pci_init_aspm(struct ieee80211_hw *hw) * 0 - Disable ASPM, * 1 - Enable ASPM without Clock Req, * 2 - Enable ASPM with Clock Req, - * 3 - Alwyas Enable ASPM with Clock Req, + * 3 - Always Enable ASPM with Clock Req, * 4 - Always Enable ASPM without Clock Req. * set defult to RTL8192CE:3 RTL8192E:2 * */ diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index 3336ca9..d26f957 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -179,7 +179,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, }

/* - *If a country IE has been recieved check its rule for this + *If a country IE has been received check its rule for this *channel first before enabling active scan. The passive scan *would have been enforced by the initial processing of our *custom regulatory domain. diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index 01226f8..07db95f 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -1555,7 +1555,7 @@ struct rtl_priv {

/*************************************** - Bluetooth Co-existance Related + Bluetooth Co-existence Related ****************************************/

enum bt_ant_num { diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c index 0ade4bd..81f164b 100644 --- a/drivers/net/wireless/wl1251/cmd.c +++ b/drivers/net/wireless/wl1251/cmd.c @@ -104,7 +104,7 @@ int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer) * @wl: wl struct * @id: acx id * @buf: buffer for the response, including all headers, must work with dma - * @len: lenght of buf + * @len: length of buf */ int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len) { diff --git a/drivers/net/wireless/wl1251/rx.c b/drivers/net/wireless/wl1251/rx.c index c1b3b3f..6af3526 100644 --- a/drivers/net/wireless/wl1251/rx.c +++ b/drivers/net/wireless/wl1251/rx.c @@ -179,7 +179,7 @@ static void wl1251_rx_body(struct wl1251 *wl, rx_buffer = skb_put(skb, length); wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);

- /* The actual lenght doesn't include the target's alignment */ + /* The actual length doesn't include the target's alignment */ skb->len = desc->length - PLCP_HEADER_LENGTH;

fc = (u16 *)skb->data; diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c index f0aa7ab..9632433 100644 --- a/drivers/net/wireless/wl12xx/cmd.c +++ b/drivers/net/wireless/wl12xx/cmd.c @@ -359,7 +359,7 @@ int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) * @wl: wl struct * @id: acx id * @buf: buffer for the response, including all headers, must work with dma - * @len: lenght of buf + * @len: length of buf */ int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) { diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index 856a8a2..8a83238 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -497,7 +497,7 @@ struct conf_rx_settings { #define CONF_TX_RATE_RETRY_LIMIT 10

/* - * Rates supported for data packets when operating as AP. Note the absense + * Rates supported for data packets when operating as AP. Note the absence * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop * one. The rate dropped is not mandatory under any operating mode. */ @@ -572,7 +572,7 @@ enum conf_tx_ac { CONF_TX_AC_BK = 1, /* background */ CONF_TX_AC_VI = 2, /* video */ CONF_TX_AC_VO = 3, /* voice */ - CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ + CONF_TX_AC_CTS2SELF = 4, /* fictitious AC, follows AC_VO */ CONF_TX_AC_ANY_TID = 0x1f };

@@ -1169,7 +1169,7 @@ struct conf_memory_settings {

/* * Minimum required free tx memory blocks in order to assure optimum - * performence + * performance * * Range: 0-120 */ @@ -1177,7 +1177,7 @@ struct conf_memory_settings {

/* * Minimum required free rx memory blocks in order to assure optimum - * performence + * performance * * Range: 0-120 */ diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h index c1aac82..00c771e 100644 --- a/drivers/net/wireless/wl12xx/io.h +++ b/drivers/net/wireless/wl12xx/io.h @@ -94,7 +94,7 @@ static inline int wl1271_translate_addr(struct wl1271 *wl, int addr) * translated region. * * The translated regions occur next to each other in physical device - * memory, so just add the sizes of the preceeding address regions to + * memory, so just add the sizes of the preceding address regions to * get the offset to the new region. * * Currently, only the two first regions are addressed, and the diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 3e5befe..fc08f36 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -290,7 +290,7 @@ static void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest, * \ - IEEE 802.11 -/ -------------- len --------------/ * -struct wl3501_80211_tx_hdr--/ -------- Ethernet Frame -------/ * - * Return = Postion in Card + * Return = Position in Card */ static u16 wl3501_get_tx_buffer(struct wl3501_card *this, u16 len) { @@ -1932,7 +1932,7 @@ static int wl3501_config(struct pcmcia_device *link) this->base_addr = dev->base_addr;

if (!wl3501_get_flash_mac_addr(this)) { - printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n", + printk(KERN_WARNING "%s: Can't read MAC addr in flash ROM?\n", dev->name); unregister_netdev(dev); goto failed; diff --git a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c index 0597d86..e361174 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c +++ b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c @@ -169,7 +169,7 @@ static int rf2959_init_hw(struct zd_rf *rf) { CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A }, { CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 }, /* { CR91, 0x18 }, */ - /* should solve continous CTS frame problems */ + /* should solve continuous CTS frame problems */ { CR91, 0x00 }, { CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 }, { CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 }, diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c index 9e74eb1..ba0a0cc 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c +++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c @@ -353,7 +353,7 @@ static int uw2453_init_hw(struct zd_rf *rf) };

static const u32 rv[] = { - UW2453_REGWRITE(4, 0x2b), /* configure reciever gain */ + UW2453_REGWRITE(4, 0x2b), /* configure receiver gain */ UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */ UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */ UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */ diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index 2642af4..372572c 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -786,7 +786,7 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) * @reg: register number to write to * @val: value to write to the register number specified by reg * - * This fucntion waits till the device is ready to accept a new MDIO + * This function waits till the device is ready to accept a new MDIO * request and then writes the val to the MDIO Write Data register. */ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, diff --git a/drivers/net/znet.c b/drivers/net/znet.c index ae07b3d..ec2800f 100644 --- a/drivers/net/znet.c +++ b/drivers/net/znet.c @@ -652,7 +652,7 @@ static irqreturn_t znet_interrupt(int irq, void *dev_id) dev->stats.tx_errors++;

/* Transceiver may be stuck if cable - * was removed while emiting a + * was removed while emitting a * packet. Flip it off, then on to * reset it. This is very empirical, * but it seems to work. */ diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index c9db49c..8b63a69 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -676,7 +676,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,

early_init_dt_check_for_initrd(node);

- /* Retreive command line */ + /* Retrieve command line */ p = of_get_flat_dt_prop(node, "bootargs", &l); if (p != NULL && l > 0) strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index dcd7857..d35e300b 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -136,7 +136,7 @@ EXPORT_SYMBOL(of_phy_find_device); * @hndlr: Link state callback for the network device * @iface: PHY data interface type * - * Returns a pointer to the phy_device if successfull. NULL otherwise + * Returns a pointer to the phy_device if successful. NULL otherwise */ struct phy_device *of_phy_connect(struct net_device *dev, struct device_node *phy_np, diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 1062b8f..246a92f 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -141,7 +141,7 @@ struct pdcspath_attribute paths_attr_##_name = { \ * @entry: A pointer to an allocated pdcspath_entry. * * The general idea is that you don't read from the Stable Storage every time - * you access the files provided by the facilites. We store a copy of the + * you access the files provided by the facilities. We store a copy of the * content of the stable storage WRT various paths in these structs. We read * these structs when reading the files, and we will write to these structs when * writing to the files, and only then write them back to the Stable Storage. @@ -213,7 +213,7 @@ pdcspath_store(struct pdcspath_entry *entry)

/* addr, devpath and count must be word aligned */ if (pdc_stable_write(entry->addr, devpath, sizeof(*devpath)) != PDC_OK) { - printk(KERN_ERR "%s: an error occured when writing to PDC.\n" + printk(KERN_ERR "%s: an error occurred when writing to PDC.\n" "It is likely that the Stable Storage data has been corrupted.\n" "Please check it carefully upon next reboot.\n", __func__); WARN_ON(1); diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 855f389..d92185a 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -142,7 +142,7 @@ config PARPORT_AX88796 the AX88796 network controller chip. This code is also available as a module (say M), called parport_ax88796.

- The driver is not dependant on the AX88796 network driver, and + The driver is not dependent on the AX88796 network driver, and should not interfere with the networking functions of the chip.

config PARPORT_1284 diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c index 8901ecf..f9fd4b3 100644 --- a/drivers/parport/ieee1284.c +++ b/drivers/parport/ieee1284.c @@ -355,7 +355,7 @@ int parport_negotiate (struct parport *port, int mode) return 0; }

- /* Go to compability forward idle mode */ + /* Go to compatibility forward idle mode */ if (port->ieee1284.mode != IEEE1284_MODE_COMPAT) parport_ieee1284_terminate (port);

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 8d62fb7..a3755ff 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -1488,7 +1488,7 @@ static void __devinit winbond_check(int io, int key)

outb(key, io); outb(key, io); /* Write Magic Sequence to EFER, extended - funtion enable register */ + function enable register */ outb(0x20, io); /* Write EFIR, extended function index register */ devid = inb(io + 1); /* Read EFDR, extended function data register */ outb(0x21, io); @@ -1527,7 +1527,7 @@ static void __devinit winbond_check2(int io, int key) x_oldid = inb(io + 2);

outb(key, io); /* Write Magic Byte to EFER, extended - funtion enable register */ + function enable register */ outb(0x20, io + 2); /* Write EFIR, extended function index register */ devid = inb(io + 2); /* Read EFDR, extended function data register */ outb(0x21, io + 1); @@ -1569,7 +1569,7 @@ static void __devinit smsc_check(int io, int key)

outb(key, io); outb(key, io); /* Write Magic Sequence to EFER, extended - funtion enable register */ + function enable register */ outb(0x0d, io); /* Write EFIR, extended function index register */ oldid = inb(io + 1); /* Read EFDR, extended function data register */ outb(0x0e, io); diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 3bc72d1..8f3faf3 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -351,7 +351,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags) * To handle different BIOS behavior, we look for _OSC on a root * bridge preferentially (according to PCI fw spec). Later for * OSHP within the scope of the hotplug controller and its parents, - * upto the host bridge under which this controller exists. + * up to the host bridge under which this controller exists. */ handle = acpi_find_root_bridge_handle(pdev); if (handle) { diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index e610cfe..2f67e9b 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -585,7 +585,7 @@ static void remove_bridge(acpi_handle handle)

/* * On root bridges with hotplug slots directly underneath (ie, - * no p2p bridge inbetween), we call cleanup_bridge(). + * no p2p bridge between), we call cleanup_bridge(). * * The else clause cleans up root bridges that either had no * hotplug slots at all, or had a p2p bridge underneath. diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index ef7411c..758adb5 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -290,7 +290,7 @@ static int is_php_dn(struct device_node *dn, const int **indexes, * @dn: device node of slot * * This subroutine will register a hotplugable slot with the - * PCI hotplug infrastructure. This routine is typicaly called + * PCI hotplug infrastructure. This routine is typically called * during boot time, if the hotplug slots are present at boot time, * or is called later, by the dlpar add code, if the slot is * being dynamically added during runtime. diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 7da3bef..505c1c7 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2265,7 +2265,7 @@ int __init init_dmars(void) /* * TBD: * we could share the same root & context tables - * amoung all IOMMU's. Need to Split it later. + * among all IOMMU's. Need to Split it later. */ ret = iommu_alloc_root_entry(iommu); if (ret) { diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index a22557b..3607faf 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -289,7 +289,7 @@ int free_irte(int irq) * source validation type */ #define SVT_NO_VERIFY 0x0 /* no verification is required */ -#define SVT_VERIFY_SID_SQ 0x1 /* verify using SID and SQ fiels */ +#define SVT_VERIFY_SID_SQ 0x1 /* verify using SID and SQ fields */ #define SVT_VERIFY_BUS 0x2 /* verify bus of request-id */

/* diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c index 7914951..9606e59 100644 --- a/drivers/pci/iova.c +++ b/drivers/pci/iova.c @@ -391,7 +391,7 @@ reserve_iova(struct iova_domain *iovad, break; }

- /* We are here either becasue this is the first reserver node + /* We are here either because this is the first reserver node * or need to insert remaining non overlap addr range */ iova = __insert_new_range(iovad, pfn_lo, pfn_hi); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index a8a277a..f8deb3e 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -645,7 +645,7 @@ pci_adjust_legacy_attr(struct pci_bus *b, enum pci_mmap_state mmap_type) * a per-bus basis. This routine creates the files and ties them into * their associated read, write and mmap files from pci-sysfs.c * - * On error unwind, but don't propogate the error to the caller + * On error unwind, but don't propagate the error to the caller * as it is ok to set up the PCI bus without these files. */ void pci_create_legacy_files(struct pci_bus *b) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bd80f63..5129ed6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -263,7 +263,7 @@ static void quirk_vialatency(struct pci_dev *dev) * This happens to include the IDE controllers.... * * VIA only apply this fix when an SB Live! is present but under - * both Linux and Windows this isnt enough, and we have seen + * both Linux and Windows this isn't enough, and we have seen * corruption without SB Live! but with things like 3 UDMA IDE * controllers. So we ignore that bit of the VIA recommendation.. */ @@ -2680,7 +2680,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); * This is a quirk for the Ricoh MMC controller found as a part of * some mulifunction chips.

- * This is very similiar and based on the ricoh_mmc driver written by + * This is very similar and based on the ricoh_mmc driver written by * Philip Langdale. Thank you for these magic sequences. * * These chips implement the four main memory card controllers (SD, MMC, MS, xD) diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index fc7906e..3e447d0 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -54,7 +54,7 @@ static struct pccard_operations i82092aa_operations = { .set_mem_map = i82092aa_set_mem_map, };

-/* The card can do upto 4 sockets, allocate a structure for each of them */ +/* The card can do up to 4 sockets, allocate a structure for each of them */

struct socket_info { int number; diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 42fbf1a..fe77e82 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -173,7 +173,7 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev, c = p_dev->function_config;

if (!(c->state & CONFIG_LOCKED)) { - dev_dbg(&p_dev->dev, "Configuration isnt't locked\n"); + dev_dbg(&p_dev->dev, "Configuration isn't't locked\n"); mutex_unlock(&s->ops_mutex); return -EACCES; } diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c index 25afe63..c21888e 100644 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ b/drivers/pcmcia/pxa2xx_lubbock.c @@ -187,7 +187,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, * We need to hack around the const qualifier as * well to keep this ugly workaround localized and * not force it to the rest of the code. Barf bags - * avaliable in the seat pocket in front of you! + * available in the seat pocket in front of you! */ ((socket_state_t *)state)->Vcc = 50; ((socket_state_t *)state)->Vpp = 50; diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index 9ffa97d..a717894 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -691,7 +691,7 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket) /* * those are either single or dual slot CB with additional functions * like 1394, smartcard reader, etc. check the TIEALL flag for them - * the TIEALL flag binds the IRQ of all functions toghether. + * the TIEALL flag binds the IRQ of all functions together. * we catch the single slot variants later. */ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL); diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index 6c12db5..c2f4bd8 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -202,7 +202,7 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) if (ret) return ret;