linux-merge February 2019

linux-merge@lists.open-mesh.org

3 participants
81 discussions

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit e2d0d35b5b0ce420505e88255fd5922ed035bb8d Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 13:15:00 2018 +0100 batman-adv: Add gateway mesh genl configuration The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes: * u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server) * u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_SEL_CLASS Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 847841b8de5d..165272be6878 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -140,6 +140,20 @@ enum batadv_mcast_flags_priv { }; /** + * enum batadv_gw_modes - gateway mode of node + */ +enum batadv_gw_modes { + /** @BATADV_GW_MODE_OFF: gw mode disabled */ + BATADV_GW_MODE_OFF, + + /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */ + BATADV_GW_MODE_CLIENT, + + /** @BATADV_GW_MODE_SERVER: announce itself as gatway server */ + BATADV_GW_MODE_SERVER, +}; + +/** * enum batadv_nl_attrs - batman-adv netlink attributes */ enum batadv_nl_attrs { @@ -403,6 +417,32 @@ enum batadv_nl_attrs { */ BATADV_ATTR_FRAGMENTATION_ENABLED, + /** + * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_GW_MODE: defines the state of the gateway features. + * Possible values are specified in enum batadv_gw_modes + */ + BATADV_ATTR_GW_MODE, + + /** + * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node + * will use to choose a gateway if gw_mode was set to 'client'. + */ + BATADV_ATTR_GW_SEL_CLASS, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index 0a6b9b30eabd..f5811f61aa92 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -47,7 +47,6 @@ #include <uapi/linux/batadv_packet.h> #include <uapi/linux/batman_adv.h> -#include "gateway_common.h" #include "hard-interface.h" #include "log.h" #include "netlink.h" diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c index 53d03adc9bfc..e064de45e22c 100644 --- a/net/batman-adv/gateway_common.c +++ b/net/batman-adv/gateway_common.c @@ -28,6 +28,7 @@ #include <linux/stddef.h> #include <linux/string.h> #include <uapi/linux/batadv_packet.h> +#include <uapi/linux/batman_adv.h> #include "gateway_client.h" #include "log.h" diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h index 89bae100a0b0..128467a0fb89 100644 --- a/net/batman-adv/gateway_common.h +++ b/net/batman-adv/gateway_common.h @@ -25,12 +25,6 @@ struct net_device; -enum batadv_gw_modes { - BATADV_GW_MODE_OFF, - BATADV_GW_MODE_CLIENT, - BATADV_GW_MODE_SERVER, -}; - /** * enum batadv_bandwidth_units - bandwidth unit types */ diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 5b2160d2f482..473467afea91 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -51,6 +51,7 @@ #include "bridge_loop_avoidance.h" #include "distributed-arp-table.h" #include "gateway_client.h" +#include "gateway_common.h" #include "hard-interface.h" #include "multicast.h" #include "originator.h" @@ -147,6 +148,10 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_GW_BANDWIDTH_DOWN] = { .type = NLA_U32 }, + [BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 }, + [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 }, + [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, }; /** @@ -303,6 +308,28 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->fragmentation))) goto nla_put_failure; + if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_DOWN, + atomic_read(&bat_priv->gw.bandwidth_down))) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_UP, + atomic_read(&bat_priv->gw.bandwidth_up))) + goto nla_put_failure; + + if (nla_put_u8(msg, BATADV_ATTR_GW_MODE, + atomic_read(&bat_priv->gw.mode))) + goto nla_put_failure; + + if (bat_priv->algo_ops->gw.get_best_gw_node && + bat_priv->algo_ops->gw.is_eligible) { + /* GW selection class is not available if the routing algorithm + * in use does not implement the GW API + */ + if (nla_put_u32(msg, BATADV_ATTR_GW_SEL_CLASS, + atomic_read(&bat_priv->gw.sel_class))) + goto nla_put_failure; + } + if (primary_if) batadv_hardif_put(primary_if); @@ -444,6 +471,71 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) batadv_update_min_mtu(bat_priv->soft_iface); } + if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]) { + attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]; + + atomic_set(&bat_priv->gw.bandwidth_down, nla_get_u32(attr)); + batadv_gw_tvlv_container_update(bat_priv); + } + + if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]) { + attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]; + + atomic_set(&bat_priv->gw.bandwidth_up, nla_get_u32(attr)); + batadv_gw_tvlv_container_update(bat_priv); + } + + if (info->attrs[BATADV_ATTR_GW_MODE]) { + u8 gw_mode; + + attr = info->attrs[BATADV_ATTR_GW_MODE]; + gw_mode = nla_get_u8(attr); + + if (gw_mode <= BATADV_GW_MODE_SERVER) { + /* Invoking batadv_gw_reselect() is not enough to really + * de-select the current GW. It will only instruct the + * gateway client code to perform a re-election the next + * time that this is needed. + * + * When gw client mode is being switched off the current + * GW must be de-selected explicitly otherwise no GW_ADD + * uevent is thrown on client mode re-activation. This + * is operation is performed in + * batadv_gw_check_client_stop(). + */ + batadv_gw_reselect(bat_priv); + + /* always call batadv_gw_check_client_stop() before + * changing the gateway state + */ + batadv_gw_check_client_stop(bat_priv); + atomic_set(&bat_priv->gw.mode, gw_mode); + batadv_gw_tvlv_container_update(bat_priv); + } + } + + if (info->attrs[BATADV_ATTR_GW_SEL_CLASS] && + bat_priv->algo_ops->gw.get_best_gw_node && + bat_priv->algo_ops->gw.is_eligible) { + /* setting the GW selection class is allowed only if the routing + * algorithm in use implements the GW API + */ + + u32 sel_class_max = 0xffffffffu; + u32 sel_class; + + attr = info->attrs[BATADV_ATTR_GW_SEL_CLASS]; + sel_class = nla_get_u32(attr); + + if (!bat_priv->algo_ops->gw.store_sel_class) + sel_class_max = BATADV_TQ_MAX_VALUE; + + if (sel_class >= 1 && sel_class <= sel_class_max) { + atomic_set(&bat_priv->gw.sel_class, sel_class); + batadv_gw_reselect(bat_priv); + } + } + batadv_netlink_notify_mesh(bat_priv); return 0; diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index b14fb3462af7..12028c287de5 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -50,13 +50,13 @@ #include <linux/string.h> #include <linux/types.h> #include <uapi/linux/batadv_packet.h> +#include <uapi/linux/batman_adv.h> #include "bat_algo.h" #include "bridge_loop_avoidance.h" #include "debugfs.h" #include "distributed-arp-table.h" #include "gateway_client.h" -#include "gateway_common.h" #include "hard-interface.h" #include "multicast.h" #include "network-coding.h" diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index e1b816262c53..64fd5932a555 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -40,6 +40,7 @@ #include <linux/stringify.h> #include <linux/workqueue.h> #include <uapi/linux/batadv_packet.h> +#include <uapi/linux/batman_adv.h> #include "bridge_loop_avoidance.h" #include "distributed-arp-table.h" -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit 43ff6105a527aaa1a8e00163b0b0aedbbc0c4522 Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 13:03:39 2018 +0100 batman-adv: Add bridge_loop_avoidance mesh genl configuration The mesh interface can try to detect loops in the same mesh caused by (indirectly) bridged mesh/soft-interfaces of different nodes. Some of the loops can also be resolved without breaking the mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index f74ff261ec8f..3cb35c661056 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -381,6 +381,13 @@ enum batadv_nl_attrs { */ BATADV_ATTR_BONDING_ENABLED, + /** + * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop + * avoidance feature is enabled. This feature detects and avoids loops + * between the mesh and devices bridged with the soft interface + */ + BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 310a2c339fd1..40c940da9498 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -144,6 +144,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, }; /** @@ -284,6 +285,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->bonding))) goto nla_put_failure; +#ifdef CONFIG_BATMAN_ADV_BLA + if (nla_put_u8(msg, BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + !!atomic_read(&bat_priv->bridge_loop_avoidance))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_BLA */ + if (primary_if) batadv_hardif_put(primary_if); @@ -398,6 +405,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->bonding, !!nla_get_u8(attr)); } +#ifdef CONFIG_BATMAN_ADV_BLA + if (info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]) { + attr = info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]; + + atomic_set(&bat_priv->bridge_loop_avoidance, + !!nla_get_u8(attr)); + batadv_bla_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_BLA */ + batadv_netlink_notify_mesh(bat_priv); return 0; -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit a1c8de80329609ba68ff860074070efb1e14ade4 Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 13:06:42 2018 +0100 batman-adv: Add distributed_arp_table mesh genl configuration The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 3cb35c661056..f303a1496476 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -388,6 +388,14 @@ enum batadv_nl_attrs { */ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + /** + * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed + * arp table feature is enabled. This feature uses a distributed hash + * table to answer ARP requests without flooding the request through + * the whole mesh. + */ + BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 40c940da9498..3028c2a5c782 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, }; /** @@ -291,6 +292,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_BLA */ +#ifdef CONFIG_BATMAN_ADV_DAT + if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + !!atomic_read(&bat_priv->distributed_arp_table))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_DAT */ + if (primary_if) batadv_hardif_put(primary_if); @@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_BLA */ +#ifdef CONFIG_BATMAN_ADV_DAT + if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) { + attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]; + + atomic_set(&bat_priv->distributed_arp_table, + !!nla_get_u8(attr)); + batadv_dat_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_DAT */ + batadv_netlink_notify_mesh(bat_priv); return 0; -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit e43d16b87dc2cad18799cfd1142f4acae4135ea4 Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 12:51:55 2018 +0100 batman-adv: Add ap_isolation mesh/vlan genl configuration The mesh interface can drop messages between clients to implement a mesh-wide AP isolation. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. This feature also requires that skbuff which should be handled as isolated are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK and BATADV_ATTR_ISOLATION_MASK. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index f8941e80d6b4..a4dadafe08dd 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -356,6 +356,25 @@ enum batadv_nl_attrs { */ BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + /** + * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going + * from a wireless client to another wireless client will be silently + * dropped. + */ + BATADV_ATTR_AP_ISOLATION_ENABLED, + + /** + * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MARK, + + /** + * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MASK, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 82665dc2eb2b..fc80f003ed6e 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -140,6 +140,9 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 }, [BATADV_ATTR_VLANID] = { .type = NLA_U16 }, [BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, + [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, }; /** @@ -158,6 +161,52 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype) } /** + * batadv_netlink_mesh_fill_ap_isolation() - Add ap_isolation softif attribute + * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_mesh_fill_ap_isolation(struct sk_buff *msg, + struct batadv_priv *bat_priv) +{ + struct batadv_softif_vlan *vlan; + u8 ap_isolation; + + vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS); + if (!vlan) + return 0; + + ap_isolation = atomic_read(&vlan->ap_isolation); + batadv_softif_vlan_put(vlan); + + return nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED, + !!ap_isolation); +} + +/** + * batadv_option_set_ap_isolation() - Set ap_isolation from genl msg + * @attr: parsed BATADV_ATTR_AP_ISOLATION_ENABLED attribute + * @bat_priv: the bat priv with all the soft interface information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_mesh_ap_isolation(struct nlattr *attr, + struct batadv_priv *bat_priv) +{ + struct batadv_softif_vlan *vlan; + + vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS); + if (!vlan) + return -ENOENT; + + atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr)); + batadv_softif_vlan_put(vlan); + + return 0; +} + +/** * batadv_netlink_mesh_fill() - Fill message with mesh attributes * @msg: Netlink message to dump into * @bat_priv: the bat priv with all the soft interface information @@ -219,6 +268,17 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->aggregated_ogms))) goto nla_put_failure; + if (batadv_netlink_mesh_fill_ap_isolation(msg, bat_priv)) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MARK, + bat_priv->isolation_mark)) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MASK, + bat_priv->isolation_mark_mask)) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -309,6 +369,24 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr)); } + if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) { + attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]; + + batadv_netlink_set_mesh_ap_isolation(attr, bat_priv); + } + + if (info->attrs[BATADV_ATTR_ISOLATION_MARK]) { + attr = info->attrs[BATADV_ATTR_ISOLATION_MARK]; + + bat_priv->isolation_mark = nla_get_u32(attr); + } + + if (info->attrs[BATADV_ATTR_ISOLATION_MASK]) { + attr = info->attrs[BATADV_ATTR_ISOLATION_MASK]; + + bat_priv->isolation_mark_mask = nla_get_u32(attr); + } + batadv_netlink_notify_mesh(bat_priv); return 0; @@ -705,6 +783,10 @@ static int batadv_netlink_vlan_fill(struct sk_buff *msg, if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK)) goto nla_put_failure; + if (nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED, + !!atomic_read(&vlan->ap_isolation))) + goto nla_put_failure; + genlmsg_end(msg, hdr); return 0; @@ -785,6 +867,13 @@ static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info) { struct batadv_softif_vlan *vlan = info->user_ptr[1]; struct batadv_priv *bat_priv = info->user_ptr[0]; + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) { + attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]; + + atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr)); + } batadv_netlink_notify_vlan(bat_priv, vlan); -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit d7e52506b680826d6ff7ce73e6a90a3b9defc741 Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 12:55:44 2018 +0100 batman-adv: Add bonding mesh genl configuration The mesh interface can use multiple slave/hard-interface ports at the same time to transport the traffic to other nodes. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BONDING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index a4dadafe08dd..f74ff261ec8f 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -375,6 +375,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_ISOLATION_MASK, + /** + * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through + * the mesh will be sent using multiple interfaces at the same time. + */ + BATADV_ATTR_BONDING_ENABLED, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index fc80f003ed6e..310a2c339fd1 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -143,6 +143,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, + [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, }; /** @@ -279,6 +280,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, bat_priv->isolation_mark_mask)) goto nla_put_failure; + if (nla_put_u8(msg, BATADV_ATTR_BONDING_ENABLED, + !!atomic_read(&bat_priv->bonding))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -387,6 +392,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) bat_priv->isolation_mark_mask = nla_get_u32(attr); } + if (info->attrs[BATADV_ATTR_BONDING_ENABLED]) { + attr = info->attrs[BATADV_ATTR_BONDING_ENABLED]; + + atomic_set(&bat_priv->bonding, !!nla_get_u8(attr)); + } + batadv_netlink_notify_mesh(bat_priv); return 0; -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit 49e7e37cd98122126e8da58df2fe2261c6e83df2 Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 12:41:08 2018 +0100 batman-adv: Prepare framework for vlan genl config The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the VLANs on top of the mesh/soft-interface have configuration settings. The genl interface reflects this by allowing to get/set it using the vlan specific commands BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 62456a087ef6..10f3cc34fe16 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -345,6 +345,11 @@ enum batadv_nl_attrs { */ BATADV_ATTR_MCAST_FLAGS_PRIV, + /** + * @BATADV_ATTR_VLANID: VLAN id on top of soft interface + */ + BATADV_ATTR_VLANID, + /* add attributes above here, update the policy in netlink.c */ /** @@ -465,6 +470,18 @@ enum batadv_nl_commands { */ BATADV_CMD_SET_HARDIF, + /** + * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the + * current softif + */ + BATADV_CMD_GET_VLAN, + + /** + * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the + * current softif + */ + BATADV_CMD_SET_VLAN, + /* add new commands above here */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index a184e4225fb5..d40913bb9031 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -30,6 +30,7 @@ #include <linux/genetlink.h> #include <linux/gfp.h> #include <linux/if_ether.h> +#include <linux/if_vlan.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/list.h> @@ -84,6 +85,13 @@ enum batadv_genl_ops_flags { * saved in info->user_ptr[1] */ BATADV_FLAG_NEED_HARDIF = BIT(1), + + /** + * @BATADV_FLAG_NEED_VLAN: request requires valid vlan in + * attribute BATADV_ATTR_VLANID and expects a pointer to it to be + * saved in info->user_ptr[1] + */ + BATADV_FLAG_NEED_VLAN = BIT(2), }; static const struct genl_multicast_group batadv_netlink_mcgrps[] = { @@ -130,6 +138,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_DAT_CACHE_VID] = { .type = NLA_U16 }, [BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 }, [BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 }, + [BATADV_ATTR_VLANID] = { .type = NLA_U16 }, }; /** @@ -654,6 +663,123 @@ batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb) } /** + * batadv_netlink_vlan_fill() - Fill message with vlan attributes + * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @vlan: vlan which was modified + * @cmd: type of message to generate + * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_vlan_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags) +{ + void *hdr; + + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); + if (!hdr) + return -ENOBUFS; + + if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX, + bat_priv->soft_iface->ifindex)) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK)) + goto nla_put_failure; + + genlmsg_end(msg, hdr); + return 0; + +nla_put_failure: + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; +} + +/** + * batadv_netlink_notify_vlan() - send vlan attributes to listener + * @bat_priv: the bat priv with all the soft interface information + * @vlan: vlan which was modified + * + * Return: 0 on success, < 0 on error + */ +static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan) +{ + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan, + BATADV_CMD_SET_VLAN, 0, 0, 0); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); + + return 0; +} + +/** + * batadv_netlink_get_vlan() - Get vlan attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_vlan(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_softif_vlan *vlan = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN, + info->snd_portid, info->snd_seq, 0); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_vlan() - Get vlan attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_softif_vlan *vlan = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_vlan(bat_priv, vlan); + + return 0; +} + +/** * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes * @net: the applicable net namespace * @info: receiver information @@ -734,6 +860,34 @@ err_put_harddev: } /** + * batadv_get_vlan_from_info() - Retrieve vlan from genl attributes + * @bat_priv: the bat priv with all the soft interface information + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to vlan on success (with increased refcnt), error pointer + * on error + */ +static struct batadv_softif_vlan * +batadv_get_vlan_from_info(struct batadv_priv *bat_priv, struct net *net, + struct genl_info *info) +{ + struct batadv_softif_vlan *vlan; + u16 vid; + + if (!info->attrs[BATADV_ATTR_VLANID]) + return ERR_PTR(-EINVAL); + + vid = nla_get_u16(info->attrs[BATADV_ATTR_VLANID]); + + vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG); + if (!vlan) + return ERR_PTR(-ENOENT); + + return vlan; +} + +/** * batadv_pre_doit() - Prepare batman-adv genl doit request * @ops: requested netlink operation * @skb: Netlink message with request data @@ -747,16 +901,17 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, struct net *net = genl_info_net(info); struct batadv_hard_iface *hard_iface; struct batadv_priv *bat_priv = NULL; + struct batadv_softif_vlan *vlan; struct net_device *soft_iface; u8 user_ptr1_flags; u8 mesh_dep_flags; int ret; - user_ptr1_flags = BATADV_FLAG_NEED_HARDIF; + user_ptr1_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN; if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1)) return -EINVAL; - mesh_dep_flags = BATADV_FLAG_NEED_HARDIF; + mesh_dep_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN; if (WARN_ON((ops->internal_flags & mesh_dep_flags) && (~ops->internal_flags & BATADV_FLAG_NEED_MESH))) return -EINVAL; @@ -780,6 +935,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, info->user_ptr[1] = hard_iface; } + if (ops->internal_flags & BATADV_FLAG_NEED_VLAN) { + vlan = batadv_get_vlan_from_info(bat_priv, net, info); + if (IS_ERR(vlan)) { + ret = PTR_ERR(vlan); + goto err_put_softif; + } + + info->user_ptr[1] = vlan; + } + return 0; err_put_softif: @@ -799,6 +964,7 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { struct batadv_hard_iface *hard_iface; + struct batadv_softif_vlan *vlan; struct batadv_priv *bat_priv; if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF && @@ -808,6 +974,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, batadv_hardif_put(hard_iface); } + if (ops->internal_flags & BATADV_FLAG_NEED_VLAN && info->user_ptr[1]) { + vlan = info->user_ptr[1]; + batadv_softif_vlan_put(vlan); + } + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { bat_priv = info->user_ptr[0]; dev_put(bat_priv->soft_iface); @@ -920,6 +1091,22 @@ static const struct genl_ops batadv_netlink_ops[] = { .internal_flags = BATADV_FLAG_NEED_MESH | BATADV_FLAG_NEED_HARDIF, }, + { + .cmd = BATADV_CMD_GET_VLAN, + /* can be retrieved by unprivileged users */ + .policy = batadv_netlink_policy, + .doit = batadv_netlink_get_vlan, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_VLAN, + }, + { + .cmd = BATADV_CMD_SET_VLAN, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_vlan, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_VLAN, + }, }; struct genl_family batadv_netlink_family __ro_after_init = { -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit 9ab4cee5ced970019a5d0f3a43cf85671ca7b38f Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 12:46:14 2018 +0100 batman-adv: Add aggregated_ogms mesh genl configuration The mesh interface can delay OGM messages to aggregate different ogms together in a single OGM packet. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 10f3cc34fe16..f8941e80d6b4 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -350,6 +350,12 @@ enum batadv_nl_attrs { */ BATADV_ATTR_VLANID, + /** + * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol + * messages of the mesh interface shall be aggregated or not. + */ + BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index d40913bb9031..82665dc2eb2b 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -139,6 +139,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 }, [BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 }, [BATADV_ATTR_VLANID] = { .type = NLA_U16 }, + [BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 }, }; /** @@ -214,6 +215,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; } + if (nla_put_u8(msg, BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + !!atomic_read(&bat_priv->aggregated_ogms))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -296,6 +301,13 @@ static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info) static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) { struct batadv_priv *bat_priv = info->user_ptr[0]; + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]) { + attr = info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]; + + atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr)); + } batadv_netlink_notify_mesh(bat_priv); -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit 5c55a40fa801df2d807141319c0fdbb3939c3947 Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 12:33:17 2018 +0100 batman-adv: Prepare framework for hardif genl config The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the slave/hard-interface have B.A.T.M.A.N. V specific configuration settings. The genl interface reflects this by allowing to get/set it using the hard-interface specific commands. The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is reused as get command because it already allow sto dump the content of other information from the slave/hard-interface which are not yet configuration specific. The set command BATADV_CMD_SET_HARDIF will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index b3394aac9a88..62456a087ef6 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -398,9 +398,15 @@ enum batadv_nl_commands { BATADV_CMD_GET_ROUTING_ALGOS, /** - * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces + * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the + * current softif */ - BATADV_CMD_GET_HARDIFS, + BATADV_CMD_GET_HARDIF, + + /** + * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF + */ + BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF, /** * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations @@ -453,6 +459,12 @@ enum batadv_nl_commands { */ BATADV_CMD_SET_MESH, + /** + * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the + * current softif + */ + BATADV_CMD_SET_HARDIF, + /* add new commands above here */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 179cc7cfcb70..a184e4225fb5 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -21,6 +21,7 @@ #include <linux/atomic.h> #include <linux/bitops.h> +#include <linux/bug.h> #include <linux/byteorder/generic.h> #include <linux/cache.h> #include <linux/err.h> @@ -76,6 +77,13 @@ enum batadv_genl_ops_flags { * saved in info->user_ptr[0] */ BATADV_FLAG_NEED_MESH = BIT(0), + + /** + * @BATADV_FLAG_NEED_HARDIF: request requires valid hard interface in + * attribute BATADV_ATTR_HARD_IFINDEX and expects a pointer to it to be + * saved in info->user_ptr[1] + */ + BATADV_FLAG_NEED_HARDIF = BIT(1), }; static const struct genl_multicast_group batadv_netlink_mcgrps[] = { @@ -446,29 +454,38 @@ batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info) } /** - * batadv_netlink_dump_hardif_entry() - Dump one hard interface into a message + * batadv_netlink_hardif_fill() - Fill message with hardif attributes * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @hard_iface: hard interface which was modified + * @cmd: type of message to generate * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message * @cb: Control block containing additional options - * @hard_iface: Hard interface to dump * - * Return: error code, or 0 on success + * Return: 0 on success or negative error number in case of failure */ -static int -batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid, - struct netlink_callback *cb, - struct batadv_hard_iface *hard_iface) +static int batadv_netlink_hardif_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags, + struct netlink_callback *cb) { struct net_device *net_dev = hard_iface->net_dev; void *hdr; - hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq, - &batadv_netlink_family, NLM_F_MULTI, - BATADV_CMD_GET_HARDIFS); + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); if (!hdr) - return -EMSGSIZE; + return -ENOBUFS; + + if (cb) + genl_dump_check_consistent(cb, hdr); - genl_dump_check_consistent(cb, hdr); + if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX, + bat_priv->soft_iface->ifindex)) + goto nla_put_failure; if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, net_dev->ifindex) || @@ -486,24 +503,107 @@ batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid, genlmsg_end(msg, hdr); return 0; - nla_put_failure: +nla_put_failure: genlmsg_cancel(msg, hdr); return -EMSGSIZE; } /** - * batadv_netlink_dump_hardifs() - Dump all hard interface into a messages + * batadv_netlink_notify_hardif() - send hardif attributes to listener + * @bat_priv: the bat priv with all the soft interface information + * @hard_iface: hard interface which was modified + * + * Return: 0 on success, < 0 on error + */ +static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface) +{ + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_SET_HARDIF, 0, 0, 0, NULL); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); + + return 0; +} + +/** + * batadv_netlink_get_hardif() - Get hardif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_hardif(struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_GET_HARDIF, + info->snd_portid, info->snd_seq, 0, + NULL); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_hardif() - Set hardif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_hardif(struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_hardif(bat_priv, hard_iface); + + return 0; +} + +/** + * batadv_netlink_dump_hardif() - Dump all hard interface into a messages * @msg: Netlink message to dump into * @cb: Parameters from query * * Return: error code, or length of reply message on success */ static int -batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) +batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb) { struct net *net = sock_net(cb->skb->sk); struct net_device *soft_iface; struct batadv_hard_iface *hard_iface; + struct batadv_priv *bat_priv; int ifindex; int portid = NETLINK_CB(cb->skb).portid; int skip = cb->args[0]; @@ -523,6 +623,8 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) return -ENODEV; } + bat_priv = netdev_priv(soft_iface); + rtnl_lock(); cb->seq = batadv_hardif_generation << 1 | 1; @@ -533,8 +635,10 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) if (i++ < skip) continue; - if (batadv_netlink_dump_hardif_entry(msg, portid, cb, - hard_iface)) { + if (batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_GET_HARDIF, + portid, cb->nlh->nlmsg_seq, + NLM_F_MULTI, cb)) { i--; break; } @@ -584,6 +688,52 @@ err_put_softif: } /** + * batadv_get_hardif_from_info() - Retrieve hardif from genl attributes + * @bat_priv: the bat priv with all the soft interface information + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to hard interface (with increased refcnt) on success, error + * pointer on error + */ +static struct batadv_hard_iface * +batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface; + struct net_device *hard_dev; + unsigned int hardif_index; + + if (!info->attrs[BATADV_ATTR_HARD_IFINDEX]) + return ERR_PTR(-EINVAL); + + hardif_index = nla_get_u32(info->attrs[BATADV_ATTR_HARD_IFINDEX]); + + hard_dev = dev_get_by_index(net, hardif_index); + if (!hard_dev) + return ERR_PTR(-ENODEV); + + hard_iface = batadv_hardif_get_by_netdev(hard_dev); + if (!hard_iface) + goto err_put_harddev; + + if (hard_iface->soft_iface != bat_priv->soft_iface) + goto err_put_hardif; + + /* hard_dev is referenced by hard_iface and not needed here */ + dev_put(hard_dev); + + return hard_iface; + +err_put_hardif: + batadv_hardif_put(hard_iface); +err_put_harddev: + dev_put(hard_dev); + + return ERR_PTR(-EINVAL); +} + +/** * batadv_pre_doit() - Prepare batman-adv genl doit request * @ops: requested netlink operation * @skb: Netlink message with request data @@ -595,8 +745,21 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { struct net *net = genl_info_net(info); + struct batadv_hard_iface *hard_iface; + struct batadv_priv *bat_priv = NULL; struct net_device *soft_iface; - struct batadv_priv *bat_priv; + u8 user_ptr1_flags; + u8 mesh_dep_flags; + int ret; + + user_ptr1_flags = BATADV_FLAG_NEED_HARDIF; + if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1)) + return -EINVAL; + + mesh_dep_flags = BATADV_FLAG_NEED_HARDIF; + if (WARN_ON((ops->internal_flags & mesh_dep_flags) && + (~ops->internal_flags & BATADV_FLAG_NEED_MESH))) + return -EINVAL; if (ops->internal_flags & BATADV_FLAG_NEED_MESH) { soft_iface = batadv_get_softif_from_info(net, info); @@ -607,7 +770,23 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, info->user_ptr[0] = bat_priv; } + if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF) { + hard_iface = batadv_get_hardif_from_info(bat_priv, net, info); + if (IS_ERR(hard_iface)) { + ret = PTR_ERR(hard_iface); + goto err_put_softif; + } + + info->user_ptr[1] = hard_iface; + } + return 0; + +err_put_softif: + if (bat_priv) + dev_put(bat_priv->soft_iface); + + return ret; } /** @@ -619,8 +798,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { + struct batadv_hard_iface *hard_iface; struct batadv_priv *bat_priv; + if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF && + info->user_ptr[1]) { + hard_iface = info->user_ptr[1]; + + batadv_hardif_put(hard_iface); + } + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { bat_priv = info->user_ptr[0]; dev_put(bat_priv->soft_iface); @@ -656,10 +843,13 @@ static const struct genl_ops batadv_netlink_ops[] = { .dumpit = batadv_algo_dump, }, { - .cmd = BATADV_CMD_GET_HARDIFS, - .flags = GENL_ADMIN_PERM, + .cmd = BATADV_CMD_GET_HARDIF, + /* can be retrieved by unprivileged users */ .policy = batadv_netlink_policy, - .dumpit = batadv_netlink_dump_hardifs, + .dumpit = batadv_netlink_dump_hardif, + .doit = batadv_netlink_get_hardif, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_HARDIF, }, { .cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL, @@ -722,6 +912,14 @@ static const struct genl_ops batadv_netlink_ops[] = { .doit = batadv_netlink_set_mesh, .internal_flags = BATADV_FLAG_NEED_MESH, }, + { + .cmd = BATADV_CMD_SET_HARDIF, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_hardif, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_HARDIF, + }, }; struct genl_family batadv_netlink_family __ro_after_init = { -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit c4a7a8d9bb8f9e712d0e4c90c3d11b4388b621ba Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 12:00:28 2018 +0100 batman-adv: Move common genl doit code pre/post hooks The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks") intoduced a mechanism to run specific code for doit hooks before/after the hooks are run. Since all doit hooks are requiring the batadv softif, it should be retrieved/freed in these helpers to simplify the code. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 5fe833cc9507..e56c40d1bfe0 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -20,8 +20,10 @@ #include "main.h" #include <linux/atomic.h> +#include <linux/bitops.h> #include <linux/byteorder/generic.h> #include <linux/cache.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/export.h> #include <linux/genetlink.h> @@ -54,6 +56,8 @@ #include "tp_meter.h" #include "translation-table.h" +struct net; + struct genl_family batadv_netlink_family; /* multicast groups */ @@ -61,6 +65,18 @@ enum batadv_netlink_multicast_groups { BATADV_NL_MCGRP_TPMETER, }; +/** + * enum batadv_genl_ops_flags - flags for genl_ops's internal_flags + */ +enum batadv_genl_ops_flags { + /** + * @BATADV_FLAG_NEED_MESH: request requires valid soft interface in + * attribute BATADV_ATTR_MESH_IFINDEX and expects a pointer to it to be + * saved in info->user_ptr[0] + */ + BATADV_FLAG_NEED_MESH = BIT(0), +}; + static const struct genl_multicast_group batadv_netlink_mcgrps[] = { [BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER }, }; @@ -329,40 +345,24 @@ err_genlmsg: static int batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct batadv_priv *bat_priv; + struct batadv_priv *bat_priv = info->user_ptr[0]; struct sk_buff *msg = NULL; u32 test_length; void *msg_head; - int ifindex; u32 cookie; u8 *dst; int ret; - if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS]) return -EINVAL; if (!info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]) return -EINVAL; - ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; - dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]); test_length = nla_get_u32(info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]); - soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; - } - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!msg) { ret = -ENOMEM; @@ -377,15 +377,11 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) goto out; } - bat_priv = netdev_priv(soft_iface); batadv_tp_start(bat_priv, dst, test_length, &cookie); ret = batadv_netlink_tp_meter_put(msg, cookie); out: - if (soft_iface) - dev_put(soft_iface); - if (ret) { if (msg) nlmsg_free(msg); @@ -406,38 +402,17 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) static int batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct batadv_priv *bat_priv; - int ifindex; + struct batadv_priv *bat_priv = info->user_ptr[0]; u8 *dst; int ret = 0; - if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS]) return -EINVAL; - ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; - dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]); - soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; - } - - bat_priv = netdev_priv(soft_iface); batadv_tp_stop(bat_priv, dst, BATADV_TP_REASON_CANCEL); -out: - if (soft_iface) - dev_put(soft_iface); - return ret; } @@ -545,6 +520,84 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) return msg->len; } +/** + * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to soft interface (with increased refcnt) on success, error + * pointer on error + */ +static struct net_device * +batadv_get_softif_from_info(struct net *net, struct genl_info *info) +{ + struct net_device *soft_iface; + int ifindex; + + if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) + return ERR_PTR(-EINVAL); + + ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); + + soft_iface = dev_get_by_index(net, ifindex); + if (!soft_iface) + return ERR_PTR(-ENODEV); + + if (!batadv_softif_is_valid(soft_iface)) + goto err_put_softif; + + return soft_iface; + +err_put_softif: + dev_put(soft_iface); + + return ERR_PTR(-EINVAL); +} + +/** + * batadv_pre_doit() - Prepare batman-adv genl doit request + * @ops: requested netlink operation + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info) +{ + struct net *net = genl_info_net(info); + struct net_device *soft_iface; + struct batadv_priv *bat_priv; + + if (ops->internal_flags & BATADV_FLAG_NEED_MESH) { + soft_iface = batadv_get_softif_from_info(net, info); + if (IS_ERR(soft_iface)) + return PTR_ERR(soft_iface); + + bat_priv = netdev_priv(soft_iface); + info->user_ptr[0] = bat_priv; + } + + return 0; +} + +/** + * batadv_post_doit() - End batman-adv genl doit request + * @ops: requested netlink operation + * @skb: Netlink message with request data + * @info: receiver information + */ +static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_priv *bat_priv; + + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { + bat_priv = info->user_ptr[0]; + dev_put(bat_priv->soft_iface); + } +} + static const struct genl_ops batadv_netlink_ops[] = { { .cmd = BATADV_CMD_GET_MESH_INFO, @@ -557,12 +610,14 @@ static const struct genl_ops batadv_netlink_ops[] = { .flags = GENL_ADMIN_PERM, .policy = batadv_netlink_policy, .doit = batadv_netlink_tp_meter_start, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_TP_METER_CANCEL, .flags = GENL_ADMIN_PERM, .policy = batadv_netlink_policy, .doit = batadv_netlink_tp_meter_cancel, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_GET_ROUTING_ALGOS, @@ -639,6 +694,8 @@ struct genl_family batadv_netlink_family __ro_after_init = { .version = 1, .maxattr = BATADV_ATTR_MAX, .netnsok = true, + .pre_doit = batadv_pre_doit, + .post_doit = batadv_post_doit, .module = THIS_MODULE, .ops = batadv_netlink_ops, .n_ops = ARRAY_SIZE(batadv_netlink_ops), -- LinuxNextTracking

1 0

[linux-next] LinuxNextTracking branch, master, updated. next-20190215
by batman＠open-mesh.org 15 Feb '19

15 Feb '19

The following commit has been merged in the master branch: commit 60040513536097584c3d55b39acdfa7080645d80 Author: Sven Eckelmann <sven(a)narfation.org> Date: Fri Nov 23 12:14:56 2018 +0100 batman-adv: Prepare framework for mesh genl config The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. The main objects for this configuration is the mesh/soft-interface object. Its actual object in memory already contains most of the available configuration settings. The genl interface reflects this by allowing to get/set it using the mesh specific commands. The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is reused as get command because it already provides the content of other information from the mesh/soft-interface which are not yet configuration specific. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index a28e76a7e0a2..b3394aac9a88 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -27,6 +27,7 @@ #define BATADV_NL_NAME "batadv" +#define BATADV_NL_MCAST_GROUP_CONFIG "config" #define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter" /** @@ -372,10 +373,14 @@ enum batadv_nl_commands { BATADV_CMD_UNSPEC, /** - * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv - * device + * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh */ - BATADV_CMD_GET_MESH_INFO, + BATADV_CMD_GET_MESH, + + /** + * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH + */ + BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH, /** * @BATADV_CMD_TP_METER: Start a tp meter session @@ -443,6 +448,11 @@ enum batadv_nl_commands { */ BATADV_CMD_GET_MCAST_FLAGS, + /** + * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh + */ + BATADV_CMD_SET_MESH, + /* add new commands above here */ /** diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index e56c40d1bfe0..179cc7cfcb70 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -62,6 +62,7 @@ struct genl_family batadv_netlink_family; /* multicast groups */ enum batadv_netlink_multicast_groups { + BATADV_NL_MCGRP_CONFIG, BATADV_NL_MCGRP_TPMETER, }; @@ -78,6 +79,7 @@ enum batadv_genl_ops_flags { }; static const struct genl_multicast_group batadv_netlink_mcgrps[] = { + [BATADV_NL_MCGRP_CONFIG] = { .name = BATADV_NL_MCAST_GROUP_CONFIG }, [BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER }, }; @@ -138,20 +140,29 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype) } /** - * batadv_netlink_mesh_info_put() - fill in generic information about mesh - * interface - * @msg: netlink message to be sent back - * @soft_iface: interface for which the data should be taken + * batadv_netlink_mesh_fill() - Fill message with mesh attributes + * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @cmd: type of message to generate + * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message * - * Return: 0 on success, < 0 on error + * Return: 0 on success or negative error number in case of failure */ -static int -batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) +static int batadv_netlink_mesh_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags) { - struct batadv_priv *bat_priv = netdev_priv(soft_iface); + struct net_device *soft_iface = bat_priv->soft_iface; struct batadv_hard_iface *primary_if = NULL; struct net_device *hard_iface; - int ret = -ENOBUFS; + void *hdr; + + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); + if (!hdr) + return -ENOBUFS; if (nla_put_string(msg, BATADV_ATTR_VERSION, BATADV_SOURCE_VERSION) || nla_put_string(msg, BATADV_ATTR_ALGO_NAME, @@ -162,16 +173,16 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) soft_iface->dev_addr) || nla_put_u8(msg, BATADV_ATTR_TT_TTVN, (u8)atomic_read(&bat_priv->tt.vn))) - goto out; + goto nla_put_failure; #ifdef CONFIG_BATMAN_ADV_BLA if (nla_put_u16(msg, BATADV_ATTR_BLA_CRC, ntohs(bat_priv->bla.claim_dest.group))) - goto out; + goto nla_put_failure; #endif if (batadv_mcast_mesh_info_put(msg, bat_priv)) - goto out; + goto nla_put_failure; primary_if = batadv_primary_if_get_selected(bat_priv); if (primary_if && primary_if->if_status == BATADV_IF_ACTIVE) { @@ -183,77 +194,95 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) hard_iface->name) || nla_put(msg, BATADV_ATTR_HARD_ADDRESS, ETH_ALEN, hard_iface->dev_addr)) - goto out; + goto nla_put_failure; } - ret = 0; + if (primary_if) + batadv_hardif_put(primary_if); - out: + genlmsg_end(msg, hdr); + return 0; + +nla_put_failure: if (primary_if) batadv_hardif_put(primary_if); - return ret; + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; } /** - * batadv_netlink_get_mesh_info() - handle incoming BATADV_CMD_GET_MESH_INFO - * netlink request - * @skb: received netlink message - * @info: receiver information + * batadv_netlink_notify_mesh() - send softif attributes to listener + * @bat_priv: the bat priv with all the soft interface information * * Return: 0 on success, < 0 on error */ -static int -batadv_netlink_get_mesh_info(struct sk_buff *skb, struct genl_info *info) +static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct sk_buff *msg = NULL; - void *msg_head; - int ifindex; + struct sk_buff *msg; int ret; - if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - - ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; - soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; + ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_SET_MESH, + 0, 0, 0); + if (ret < 0) { + nlmsg_free(msg); + return ret; } - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!msg) { - ret = -ENOMEM; - goto out; - } + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); - msg_head = genlmsg_put(msg, info->snd_portid, info->snd_seq, - &batadv_netlink_family, 0, - BATADV_CMD_GET_MESH_INFO); - if (!msg_head) { - ret = -ENOBUFS; - goto out; - } + return 0; +} - ret = batadv_netlink_mesh_info_put(msg, soft_iface); +/** + * batadv_netlink_get_mesh() - Get softif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; - out: - if (soft_iface) - dev_put(soft_iface); + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; - if (ret) { - if (msg) - nlmsg_free(msg); + ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_GET_MESH, + info->snd_portid, info->snd_seq, 0); + if (ret < 0) { + nlmsg_free(msg); return ret; } - genlmsg_end(msg, msg_head); - return genlmsg_reply(msg, info); + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_mesh() - Set softif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_mesh(bat_priv); + + return 0; } /** @@ -600,10 +629,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, static const struct genl_ops batadv_netlink_ops[] = { { - .cmd = BATADV_CMD_GET_MESH_INFO, - .flags = GENL_ADMIN_PERM, + .cmd = BATADV_CMD_GET_MESH, + /* can be retrieved by unprivileged users */ .policy = batadv_netlink_policy, - .doit = batadv_netlink_get_mesh_info, + .doit = batadv_netlink_get_mesh, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_TP_METER, @@ -685,7 +715,13 @@ static const struct genl_ops batadv_netlink_ops[] = { .policy = batadv_netlink_policy, .dumpit = batadv_mcast_flags_dump, }, - + { + .cmd = BATADV_CMD_SET_MESH, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_mesh, + .internal_flags = BATADV_FLAG_NEED_MESH, + }, }; struct genl_family batadv_netlink_family __ro_after_init = { -- LinuxNextTracking

1 0

← Newer
1
2
3
4
5
6
7
8
9
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linux-merge February 2019