--- batman-adv_master.batman_adv.h 2017-10-24 00:05:01.899410088 +0200
+++ batctl_master.batman_adv.h 2017-10-24 00:05:01.983408233 +0200
@@ -24,6 +24,20 @@
/**
* enum batadv_tt_client_flags - TT client specific flags
+ * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
+ * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new
+ * update telling its new real location has not been received/sent yet
+ * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface.
+ * This information is used by the "AP Isolation" feature
+ * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
+ * information is used by the Extended Isolation feature
+ * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table
+ * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has
+ * not been announced yet
+ * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept
+ * in the table for one more originator interval for consistency purposes
+ * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of
+ * the network but no nnode has already announced it
*
* Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
* Bits from 8 to 15 are called _local flags_ because they are used for local
@@ -34,385 +48,160 @@
* in the TT CRC computation.
*/
enum batadv_tt_client_flags {
- /**
- * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
- */
BATADV_TT_CLIENT_DEL = (1 << 0),
-
- /**
- * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and
- * the new update telling its new real location has not been
- * received/sent yet
- */
BATADV_TT_CLIENT_ROAM = (1 << 1),
-
- /**
- * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi
- * interface. This information is used by the "AP Isolation" feature
- */
BATADV_TT_CLIENT_WIFI = (1 << 4),
-
- /**
- * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
- * information is used by the Extended Isolation feature
- */
BATADV_TT_CLIENT_ISOLA = (1 << 5),
-
- /**
- * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from
- * the table
- */
BATADV_TT_CLIENT_NOPURGE = (1 << 8),
-
- /**
- * @BATADV_TT_CLIENT_NEW: this client has been added to the local table
- * but has not been announced yet
- */
BATADV_TT_CLIENT_NEW = (1 << 9),
-
- /**
- * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it
- * is kept in the table for one more originator interval for consistency
- * purposes
- */
BATADV_TT_CLIENT_PENDING = (1 << 10),
-
- /**
- * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
- * part of the network but no nnode has already announced it
- */
BATADV_TT_CLIENT_TEMP = (1 << 11),
};
/**
* enum batadv_nl_attrs - batman-adv netlink attributes
+ *
+ * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
+ * @BATADV_ATTR_VERSION: batman-adv version string
+ * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
+ * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
+ * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
+ * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
+ * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
+ * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
+ * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface
+ * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
+ * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status)
+ * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
+ * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
+ * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
+ * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
+ * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
+ * @BATADV_ATTR_TT_ADDRESS: Client MAC address
+ * @BATADV_ATTR_TT_TTVN: Translation table version
+ * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
+ * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
+ * @BATADV_ATTR_TT_VID: VLAN ID
+ * @BATADV_ATTR_TT_FLAGS: Translation table client flags
+ * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
+ * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
+ * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
+ * @BATADV_ATTR_TQ: TQ to neighbour
+ * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
+ * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
+ * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
+ * @BATADV_ATTR_ROUTER: Gateway router MAC address
+ * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
+ * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
+ * @BATADV_ATTR_BLA_VID: BLA VLAN ID
+ * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
+ * @BATADV_ATTR_BLA_CRC: BLA CRC
+ * @__BATADV_ATTR_AFTER_LAST: internal use
+ * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
+ * @BATADV_ATTR_MAX: highest attribute number currently defined
*/
enum batadv_nl_attrs {
- /**
- * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
- */
BATADV_ATTR_UNSPEC,
-
- /**
- * @BATADV_ATTR_VERSION: batman-adv version string
- */
BATADV_ATTR_VERSION,
-
- /**
- * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
- */
BATADV_ATTR_ALGO_NAME,
-
- /**
- * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
- */
BATADV_ATTR_MESH_IFINDEX,
-
- /**
- * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
- */
BATADV_ATTR_MESH_IFNAME,
-
- /**
- * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
- */
BATADV_ATTR_MESH_ADDRESS,
-
- /**
- * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
- */
BATADV_ATTR_HARD_IFINDEX,
-
- /**
- * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
- */
BATADV_ATTR_HARD_IFNAME,
-
- /**
- * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv
- * interface
- */
BATADV_ATTR_HARD_ADDRESS,
-
- /**
- * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
- */
BATADV_ATTR_ORIG_ADDRESS,
-
- /**
- * @BATADV_ATTR_TPMETER_RESULT: result of run (see
- * batadv_tp_meter_status)
- */
BATADV_ATTR_TPMETER_RESULT,
-
- /**
- * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
- */
BATADV_ATTR_TPMETER_TEST_TIME,
-
- /**
- * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
- */
BATADV_ATTR_TPMETER_BYTES,
-
- /**
- * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
- */
BATADV_ATTR_TPMETER_COOKIE,
-
- /**
- * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
- */
BATADV_ATTR_PAD,
-
- /**
- * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
- */
BATADV_ATTR_ACTIVE,
-
- /**
- * @BATADV_ATTR_TT_ADDRESS: Client MAC address
- */
BATADV_ATTR_TT_ADDRESS,
-
- /**
- * @BATADV_ATTR_TT_TTVN: Translation table version
- */
BATADV_ATTR_TT_TTVN,
-
- /**
- * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
- */
BATADV_ATTR_TT_LAST_TTVN,
-
- /**
- * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
- */
BATADV_ATTR_TT_CRC32,
-
- /**
- * @BATADV_ATTR_TT_VID: VLAN ID
- */
BATADV_ATTR_TT_VID,
-
- /**
- * @BATADV_ATTR_TT_FLAGS: Translation table client flags
- */
BATADV_ATTR_TT_FLAGS,
-
- /**
- * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
- */
BATADV_ATTR_FLAG_BEST,
-
- /**
- * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
- */
BATADV_ATTR_LAST_SEEN_MSECS,
-
- /**
- * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
- */
BATADV_ATTR_NEIGH_ADDRESS,
-
- /**
- * @BATADV_ATTR_TQ: TQ to neighbour
- */
BATADV_ATTR_TQ,
-
- /**
- * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
- */
BATADV_ATTR_THROUGHPUT,
-
- /**
- * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
- */
BATADV_ATTR_BANDWIDTH_UP,
-
- /**
- * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
- */
BATADV_ATTR_BANDWIDTH_DOWN,
-
- /**
- * @BATADV_ATTR_ROUTER: Gateway router MAC address
- */
BATADV_ATTR_ROUTER,
-
- /**
- * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
- */
BATADV_ATTR_BLA_OWN,
-
- /**
- * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
- */
BATADV_ATTR_BLA_ADDRESS,
-
- /**
- * @BATADV_ATTR_BLA_VID: BLA VLAN ID
- */
BATADV_ATTR_BLA_VID,
-
- /**
- * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
- */
BATADV_ATTR_BLA_BACKBONE,
-
- /**
- * @BATADV_ATTR_BLA_CRC: BLA CRC
- */
BATADV_ATTR_BLA_CRC,
-
/* add attributes above here, update the policy in netlink.c */
-
- /**
- * @__BATADV_ATTR_AFTER_LAST: internal use
- */
__BATADV_ATTR_AFTER_LAST,
-
- /**
- * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
- */
NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
-
- /**
- * @BATADV_ATTR_MAX: highest attribute number currently defined
- */
BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
};
/**
* enum batadv_nl_commands - supported batman-adv netlink commands
+ *
+ * @BATADV_CMD_UNSPEC: unspecified command to catch errors
+ * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device
+ * @BATADV_CMD_TP_METER: Start a tp meter session
+ * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
+ * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
+ * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+ * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
+ * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations
+ * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
+ * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
+ * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
+ * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
+ * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones
+ * @__BATADV_CMD_AFTER_LAST: internal use
+ * @BATADV_CMD_MAX: highest used command number
*/
enum batadv_nl_commands {
- /**
- * @BATADV_CMD_UNSPEC: unspecified command to catch errors
- */
BATADV_CMD_UNSPEC,
-
- /**
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
- * device
- */
BATADV_CMD_GET_MESH_INFO,
-
- /**
- * @BATADV_CMD_TP_METER: Start a tp meter session
- */
BATADV_CMD_TP_METER,
-
- /**
- * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
- */
BATADV_CMD_TP_METER_CANCEL,
-
- /**
- * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
- */
BATADV_CMD_GET_ROUTING_ALGOS,
-
- /**
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
- */
BATADV_CMD_GET_HARDIFS,
-
- /**
- * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
- */
BATADV_CMD_GET_TRANSTABLE_LOCAL,
-
- /**
- * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations
- */
BATADV_CMD_GET_TRANSTABLE_GLOBAL,
-
- /**
- * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
- */
BATADV_CMD_GET_ORIGINATORS,
-
- /**
- * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
- */
BATADV_CMD_GET_NEIGHBORS,
-
- /**
- * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
- */
BATADV_CMD_GET_GATEWAYS,
-
- /**
- * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
- */
BATADV_CMD_GET_BLA_CLAIM,
-
- /**
- * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance
- * backbones
- */
BATADV_CMD_GET_BLA_BACKBONE,
-
/* add new commands above here */
-
- /**
- * @__BATADV_CMD_AFTER_LAST: internal use
- */
__BATADV_CMD_AFTER_LAST,
-
- /**
- * @BATADV_CMD_MAX: highest used command number
- */
BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
};
/**
* enum batadv_tp_meter_reason - reason of a tp meter test run stop
+ * @BATADV_TP_REASON_COMPLETE: sender finished tp run
+ * @BATADV_TP_REASON_CANCEL: sender was stopped during run
+ * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't
+ * answer
+ * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
+ * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already
+ * ongoing
+ * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
+ * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
+ * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
*/
enum batadv_tp_meter_reason {
- /**
- * @BATADV_TP_REASON_COMPLETE: sender finished tp run
- */
BATADV_TP_REASON_COMPLETE = 3,
-
- /**
- * @BATADV_TP_REASON_CANCEL: sender was stopped during run
- */
BATADV_TP_REASON_CANCEL = 4,
-
/* error status >= 128 */
-
- /**
- * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or
- * didn't answer
- */
BATADV_TP_REASON_DST_UNREACHABLE = 128,
-
- /**
- * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
- */
BATADV_TP_REASON_RESEND_LIMIT = 129,
-
- /**
- * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node
- * already ongoing
- */
BATADV_TP_REASON_ALREADY_ONGOING = 130,
-
- /**
- * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
- */
BATADV_TP_REASON_MEMORY_ERROR = 131,
-
- /**
- * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
- */
BATADV_TP_REASON_CANT_SEND = 132,
-
- /**
- * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
- */
BATADV_TP_REASON_TOO_MANY = 133,
};
