--- batman-adv_maint.batman_adv.h 2016-11-01 16:53:58.791618557 +0100
+++ alfred_maint.batman_adv.h 2016-11-01 16:53:58.879624431 +0100
@@ -1,208 +0,0 @@
-/* Copyright (C) 2016 B.A.T.M.A.N. contributors:
- *
- * Matthias Schiffer
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _UAPI_LINUX_BATMAN_ADV_H_
-#define _UAPI_LINUX_BATMAN_ADV_H_
-
-#define BATADV_NL_NAME "batadv"
-
-#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter"
-
-/**
- * enum batadv_tt_client_flags - TT client specific flags
- * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
- * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new
- * update telling its new real location has not been received/sent yet
- * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface.
- * This information is used by the "AP Isolation" feature
- * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
- * information is used by the Extended Isolation feature
- * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table
- * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has
- * not been announced yet
- * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept
- * in the table for one more originator interval for consistency purposes
- * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of
- * the network but no nnode has already announced it
- *
- * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
- * Bits from 8 to 15 are called _local flags_ because they are used for local
- * computations only.
- *
- * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with
- * the other nodes in the network. To achieve this goal these flags are included
- * in the TT CRC computation.
- */
-enum batadv_tt_client_flags {
- BATADV_TT_CLIENT_DEL = (1 << 0),
- BATADV_TT_CLIENT_ROAM = (1 << 1),
- BATADV_TT_CLIENT_WIFI = (1 << 4),
- BATADV_TT_CLIENT_ISOLA = (1 << 5),
- BATADV_TT_CLIENT_NOPURGE = (1 << 8),
- BATADV_TT_CLIENT_NEW = (1 << 9),
- BATADV_TT_CLIENT_PENDING = (1 << 10),
- BATADV_TT_CLIENT_TEMP = (1 << 11),
-};
-
-/**
- * enum batadv_nl_attrs - batman-adv netlink attributes
- *
- * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
- * @BATADV_ATTR_VERSION: batman-adv version string
- * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
- * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
- * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
- * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
- * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
- * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
- * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface
- * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
- * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status)
- * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
- * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
- * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
- * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
- * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
- * @BATADV_ATTR_TT_ADDRESS: Client MAC address
- * @BATADV_ATTR_TT_TTVN: Translation table version
- * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
- * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
- * @BATADV_ATTR_TT_VID: VLAN ID
- * @BATADV_ATTR_TT_FLAGS: Translation table client flags
- * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
- * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
- * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
- * @BATADV_ATTR_TQ: TQ to neighbour
- * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
- * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
- * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
- * @BATADV_ATTR_ROUTER: Gateway router MAC address
- * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
- * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
- * @BATADV_ATTR_BLA_VID: BLA VLAN ID
- * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
- * @BATADV_ATTR_BLA_CRC: BLA CRC
- * @__BATADV_ATTR_AFTER_LAST: internal use
- * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
- * @BATADV_ATTR_MAX: highest attribute number currently defined
- */
-enum batadv_nl_attrs {
- BATADV_ATTR_UNSPEC,
- BATADV_ATTR_VERSION,
- BATADV_ATTR_ALGO_NAME,
- BATADV_ATTR_MESH_IFINDEX,
- BATADV_ATTR_MESH_IFNAME,
- BATADV_ATTR_MESH_ADDRESS,
- BATADV_ATTR_HARD_IFINDEX,
- BATADV_ATTR_HARD_IFNAME,
- BATADV_ATTR_HARD_ADDRESS,
- BATADV_ATTR_ORIG_ADDRESS,
- BATADV_ATTR_TPMETER_RESULT,
- BATADV_ATTR_TPMETER_TEST_TIME,
- BATADV_ATTR_TPMETER_BYTES,
- BATADV_ATTR_TPMETER_COOKIE,
- BATADV_ATTR_PAD,
- BATADV_ATTR_ACTIVE,
- BATADV_ATTR_TT_ADDRESS,
- BATADV_ATTR_TT_TTVN,
- BATADV_ATTR_TT_LAST_TTVN,
- BATADV_ATTR_TT_CRC32,
- BATADV_ATTR_TT_VID,
- BATADV_ATTR_TT_FLAGS,
- BATADV_ATTR_FLAG_BEST,
- BATADV_ATTR_LAST_SEEN_MSECS,
- BATADV_ATTR_NEIGH_ADDRESS,
- BATADV_ATTR_TQ,
- BATADV_ATTR_THROUGHPUT,
- BATADV_ATTR_BANDWIDTH_UP,
- BATADV_ATTR_BANDWIDTH_DOWN,
- BATADV_ATTR_ROUTER,
- BATADV_ATTR_BLA_OWN,
- BATADV_ATTR_BLA_ADDRESS,
- BATADV_ATTR_BLA_VID,
- BATADV_ATTR_BLA_BACKBONE,
- BATADV_ATTR_BLA_CRC,
- /* add attributes above here, update the policy in netlink.c */
- __BATADV_ATTR_AFTER_LAST,
- NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
- BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum batadv_nl_commands - supported batman-adv netlink commands
- *
- * @BATADV_CMD_UNSPEC: unspecified command to catch errors
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device
- * @BATADV_CMD_TP_METER: Start a tp meter session
- * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
- * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
- * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
- * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations
- * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
- * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
- * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
- * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
- * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones
- * @__BATADV_CMD_AFTER_LAST: internal use
- * @BATADV_CMD_MAX: highest used command number
- */
-enum batadv_nl_commands {
- BATADV_CMD_UNSPEC,
- BATADV_CMD_GET_MESH_INFO,
- BATADV_CMD_TP_METER,
- BATADV_CMD_TP_METER_CANCEL,
- BATADV_CMD_GET_ROUTING_ALGOS,
- BATADV_CMD_GET_HARDIFS,
- BATADV_CMD_GET_TRANSTABLE_LOCAL,
- BATADV_CMD_GET_TRANSTABLE_GLOBAL,
- BATADV_CMD_GET_ORIGINATORS,
- BATADV_CMD_GET_NEIGHBORS,
- BATADV_CMD_GET_GATEWAYS,
- BATADV_CMD_GET_BLA_CLAIM,
- BATADV_CMD_GET_BLA_BACKBONE,
- /* add new commands above here */
- __BATADV_CMD_AFTER_LAST,
- BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
-};
-
-/**
- * enum batadv_tp_meter_reason - reason of a tp meter test run stop
- * @BATADV_TP_REASON_COMPLETE: sender finished tp run
- * @BATADV_TP_REASON_CANCEL: sender was stopped during run
- * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't
- * answer
- * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
- * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already
- * ongoing
- * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
- * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
- * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
- */
-enum batadv_tp_meter_reason {
- BATADV_TP_REASON_COMPLETE = 3,
- BATADV_TP_REASON_CANCEL = 4,
- /* error status >= 128 */
- BATADV_TP_REASON_DST_UNREACHABLE = 128,
- BATADV_TP_REASON_RESEND_LIMIT = 129,
- BATADV_TP_REASON_ALREADY_ONGOING = 130,
- BATADV_TP_REASON_MEMORY_ERROR = 131,
- BATADV_TP_REASON_CANT_SEND = 132,
- BATADV_TP_REASON_TOO_MANY = 133,
-};
-
-#endif /* _UAPI_LINUX_BATMAN_ADV_H_ */
