Repository : ssh://git@diktynna/doc

On branches: backup-redmine/2021-08-07,backup-redmine/2021-09-11,backup-redmine/2021-10-09,backup-redmine/2021-11-13,backup-redmine/2021-12-11,backup-redmine/2022-01-08,backup-redmine/2022-02-12,backup-redmine/2022-03-12,backup-redmine/2022-04-09,backup-redmine/2022-05-07,backup-redmine/2022-06-11,backup-redmine/2022-08-06,backup-redmine/2022-10-07,backup-redmine/2022-11-14,backup-redmine/2023-01-14,main

commit 5fbac21d40397d103cff1cfda5e86c3491b8de0d Author: Sven Eckelmann sven@narfation.org Date: Thu Jul 22 14:42:33 2021 +0000

doc: open-mesh/Kernel_debugging_over_JTAG

5fbac21d40397d103cff1cfda5e86c3491b8de0d open-mesh/Kernel_debugging_over_JTAG.textile | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/open-mesh/Kernel_debugging_over_JTAG.textile b/open-mesh/Kernel_debugging_over_JTAG.textile index d445a2da..9e6e4cee 100644 --- a/open-mesh/Kernel_debugging_over_JTAG.textile +++ b/open-mesh/Kernel_debugging_over_JTAG.textile @@ -20,7 +20,7 @@ Requirements:

h2. Preparing the hardware

-The connection between the debug adapter and the target board must established by connecting a couple of pins with each other. +The connection between the debug adapter and the target board must established by connecting a couple of pins with each other. The color schema used here is from the "Sparkfun Bus Pirate cable":https://antibore.wordpress.com/2011/06/22/quick-reference-for-sparkfun-bus-p...

The debug and target board via at least following of the debug adapter hardware:

@@ -35,7 +35,9 @@ The adapter boards must then also be select in the OpenOCD configuration.

h3. Bus Blaster

-The Bus Blaster v3 with the 20 pin header and the default buffer logic the usage of the pins already written next to header. +The Bus Blaster v3 with the 20 pin header and the default buffer logic the usage of the pins already written next to header. Just make sure to leave the board in self powered (not closed 2 pin header) + +!/attachments/download/943/jtag-busblaster.svg!

The configuration of the adapter board and the target board is also straight forward since the release of OpenOCD 0.11