The following commit has been merged in the linux branch: commit 7232344d49b88e8787f1842936867cd224da47e5 Author: Hubert Feurstein hubert.feurstein@contec.at Date: Wed Oct 7 08:41:01 2009 +0100

ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim

Add Contec Micro9-Slim support

Cc: Ryan Mallon ryan@bluewatersys.com

Requires: 5750/1 Signed-off-by: Hubert Feurstein hubert.feurstein@contec.at Acked-by: H Hartley Sweeten hsweeten@visionengravers.com Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk

diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 4ad0380..9167c3d 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -153,6 +153,14 @@ config MACH_MICRO9L Say 'Y' here if you want your kernel to support the Contec Micro9-Lite board.

+config MACH_MICRO9S + bool "Support Contec Micro9-Slim" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Micro9-Slim board. + config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 49fbee5..d83b804 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -28,6 +28,7 @@ * Micro9-High has up to 64MB of 32-bit flash on CS1 * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1 * Micro9-Lite uses a seperate MTD map driver for flash support + * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 *************************************************************************/ static struct physmap_flash_data micro9_flash_data;

@@ -70,7 +71,7 @@ static void __init micro9_register_flash(void) { if (machine_is_micro9()) __micro9_register_flash(4); - else if (machine_is_micro9m()) + else if (machine_is_micro9m() || machine_is_micro9s()) __micro9_register_flash(micro9_detect_bootwidth()); }

@@ -129,3 +130,16 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite") .init_machine = micro9_init_machine, MACHINE_END #endif + +#ifdef CONFIG_MACH_MICRO9S +MACHINE_START(MICRO9S, "Contec Micro9-Slim") + /* Maintainer: Hubert Feurstein hubert.feurstein@contec.at */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9_init_machine, +MACHINE_END +#endif