Repository : ssh://git@open-mesh.org/batman-adv
On branch : master
commit dcad23d0be717263ffdcc5eca8f5c17614a3482f Author: Sven Eckelmann sven@narfation.org Date: Sat Oct 21 11:45:46 2017 +0200
batman-adv: use inline kernel-doc for uapi constants
The enums of constants for netlink tends to become rather large over time. Documenting them is easier when the kernel-doc is actually next to constant and not in a different block above the enum.
Also inline kernel-doc allows multi-paragraph description. This could be required to better document the netlink command types and the expected return values.
Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de
dcad23d0be717263ffdcc5eca8f5c17614a3482f include/uapi/linux/batman_adv.h | 369 +++++++++++++++++++++++++++++++--------- 1 file changed, 290 insertions(+), 79 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index a83ddb7b..efd641c8 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -24,20 +24,6 @@
/** * enum batadv_tt_client_flags - TT client specific flags - * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table - * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new - * update telling its new real location has not been received/sent yet - * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface. - * This information is used by the "AP Isolation" feature - * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This - * information is used by the Extended Isolation feature - * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table - * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has - * not been announced yet - * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept - * in the table for one more originator interval for consistency purposes - * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of - * the network but no nnode has already announced it * * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire. * Bits from 8 to 15 are called _local flags_ because they are used for local @@ -48,160 +34,385 @@ * in the TT CRC computation. */ enum batadv_tt_client_flags { + /** + * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table + */ BATADV_TT_CLIENT_DEL = (1 << 0), + + /** + * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and + * the new update telling its new real location has not been + * received/sent yet + */ BATADV_TT_CLIENT_ROAM = (1 << 1), + + /** + * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi + * interface. This information is used by the "AP Isolation" feature + */ BATADV_TT_CLIENT_WIFI = (1 << 4), + + /** + * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This + * information is used by the Extended Isolation feature + */ BATADV_TT_CLIENT_ISOLA = (1 << 5), + + /** + * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from + * the table + */ BATADV_TT_CLIENT_NOPURGE = (1 << 8), + + /** + * @BATADV_TT_CLIENT_NEW: this client has been added to the local table + * but has not been announced yet + */ BATADV_TT_CLIENT_NEW = (1 << 9), + + /** + * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it + * is kept in the table for one more originator interval for consistency + * purposes + */ BATADV_TT_CLIENT_PENDING = (1 << 10), + + /** + * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be + * part of the network but no nnode has already announced it + */ BATADV_TT_CLIENT_TEMP = (1 << 11), };
/** * enum batadv_nl_attrs - batman-adv netlink attributes - * - * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors - * @BATADV_ATTR_VERSION: batman-adv version string - * @BATADV_ATTR_ALGO_NAME: name of routing algorithm - * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface - * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface - * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface - * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface - * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface - * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface - * @BATADV_ATTR_ORIG_ADDRESS: originator mac address - * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status) - * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took - * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run - * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session - * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment - * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active - * @BATADV_ATTR_TT_ADDRESS: Client MAC address - * @BATADV_ATTR_TT_TTVN: Translation table version - * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version - * @BATADV_ATTR_TT_CRC32: CRC32 over translation table - * @BATADV_ATTR_TT_VID: VLAN ID - * @BATADV_ATTR_TT_FLAGS: Translation table client flags - * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best - * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen - * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address - * @BATADV_ATTR_TQ: TQ to neighbour - * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour - * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth - * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth - * @BATADV_ATTR_ROUTER: Gateway router MAC address - * @BATADV_ATTR_BLA_OWN: Flag indicating own originator - * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address - * @BATADV_ATTR_BLA_VID: BLA VLAN ID - * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address - * @BATADV_ATTR_BLA_CRC: BLA CRC - * @__BATADV_ATTR_AFTER_LAST: internal use - * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available - * @BATADV_ATTR_MAX: highest attribute number currently defined */ enum batadv_nl_attrs { + /** + * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors + */ BATADV_ATTR_UNSPEC, + + /** + * @BATADV_ATTR_VERSION: batman-adv version string + */ BATADV_ATTR_VERSION, + + /** + * @BATADV_ATTR_ALGO_NAME: name of routing algorithm + */ BATADV_ATTR_ALGO_NAME, + + /** + * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface + */ BATADV_ATTR_MESH_IFINDEX, + + /** + * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface + */ BATADV_ATTR_MESH_IFNAME, + + /** + * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface + */ BATADV_ATTR_MESH_ADDRESS, + + /** + * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface + */ BATADV_ATTR_HARD_IFINDEX, + + /** + * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface + */ BATADV_ATTR_HARD_IFNAME, + + /** + * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv + * interface + */ BATADV_ATTR_HARD_ADDRESS, + + /** + * @BATADV_ATTR_ORIG_ADDRESS: originator mac address + */ BATADV_ATTR_ORIG_ADDRESS, + + /** + * @BATADV_ATTR_TPMETER_RESULT: result of run (see + * batadv_tp_meter_status) + */ BATADV_ATTR_TPMETER_RESULT, + + /** + * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took + */ BATADV_ATTR_TPMETER_TEST_TIME, + + /** + * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run + */ BATADV_ATTR_TPMETER_BYTES, + + /** + * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session + */ BATADV_ATTR_TPMETER_COOKIE, + + /** + * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment + */ BATADV_ATTR_PAD, + + /** + * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active + */ BATADV_ATTR_ACTIVE, + + /** + * @BATADV_ATTR_TT_ADDRESS: Client MAC address + */ BATADV_ATTR_TT_ADDRESS, + + /** + * @BATADV_ATTR_TT_TTVN: Translation table version + */ BATADV_ATTR_TT_TTVN, + + /** + * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version + */ BATADV_ATTR_TT_LAST_TTVN, + + /** + * @BATADV_ATTR_TT_CRC32: CRC32 over translation table + */ BATADV_ATTR_TT_CRC32, + + /** + * @BATADV_ATTR_TT_VID: VLAN ID + */ BATADV_ATTR_TT_VID, + + /** + * @BATADV_ATTR_TT_FLAGS: Translation table client flags + */ BATADV_ATTR_TT_FLAGS, + + /** + * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best + */ BATADV_ATTR_FLAG_BEST, + + /** + * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen + */ BATADV_ATTR_LAST_SEEN_MSECS, + + /** + * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address + */ BATADV_ATTR_NEIGH_ADDRESS, + + /** + * @BATADV_ATTR_TQ: TQ to neighbour + */ BATADV_ATTR_TQ, + + /** + * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour + */ BATADV_ATTR_THROUGHPUT, + + /** + * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth + */ BATADV_ATTR_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth + */ BATADV_ATTR_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_ROUTER: Gateway router MAC address + */ BATADV_ATTR_ROUTER, + + /** + * @BATADV_ATTR_BLA_OWN: Flag indicating own originator + */ BATADV_ATTR_BLA_OWN, + + /** + * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address + */ BATADV_ATTR_BLA_ADDRESS, + + /** + * @BATADV_ATTR_BLA_VID: BLA VLAN ID + */ BATADV_ATTR_BLA_VID, + + /** + * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address + */ BATADV_ATTR_BLA_BACKBONE, + + /** + * @BATADV_ATTR_BLA_CRC: BLA CRC + */ BATADV_ATTR_BLA_CRC, + /* add attributes above here, update the policy in netlink.c */ + + /** + * @__BATADV_ATTR_AFTER_LAST: internal use + */ __BATADV_ATTR_AFTER_LAST, + + /** + * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available + */ NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST, + + /** + * @BATADV_ATTR_MAX: highest attribute number currently defined + */ BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1 };
/** * enum batadv_nl_commands - supported batman-adv netlink commands - * - * @BATADV_CMD_UNSPEC: unspecified command to catch errors - * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device - * @BATADV_CMD_TP_METER: Start a tp meter session - * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session - * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. - * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces - * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations - * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations - * @BATADV_CMD_GET_ORIGINATORS: Query list of originators - * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours - * @BATADV_CMD_GET_GATEWAYS: Query list of gateways - * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims - * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones - * @__BATADV_CMD_AFTER_LAST: internal use - * @BATADV_CMD_MAX: highest used command number */ enum batadv_nl_commands { + /** + * @BATADV_CMD_UNSPEC: unspecified command to catch errors + */ BATADV_CMD_UNSPEC, + + /** + * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv + * device + */ BATADV_CMD_GET_MESH_INFO, + + /** + * @BATADV_CMD_TP_METER: Start a tp meter session + */ BATADV_CMD_TP_METER, + + /** + * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session + */ BATADV_CMD_TP_METER_CANCEL, + + /** + * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. + */ BATADV_CMD_GET_ROUTING_ALGOS, + + /** + * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces + */ BATADV_CMD_GET_HARDIFS, + + /** + * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations + */ BATADV_CMD_GET_TRANSTABLE_LOCAL, + + /** + * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations + */ BATADV_CMD_GET_TRANSTABLE_GLOBAL, + + /** + * @BATADV_CMD_GET_ORIGINATORS: Query list of originators + */ BATADV_CMD_GET_ORIGINATORS, + + /** + * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours + */ BATADV_CMD_GET_NEIGHBORS, + + /** + * @BATADV_CMD_GET_GATEWAYS: Query list of gateways + */ BATADV_CMD_GET_GATEWAYS, + + /** + * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims + */ BATADV_CMD_GET_BLA_CLAIM, + + /** + * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance + * backbones + */ BATADV_CMD_GET_BLA_BACKBONE, + /* add new commands above here */ + + /** + * @__BATADV_CMD_AFTER_LAST: internal use + */ __BATADV_CMD_AFTER_LAST, + + /** + * @BATADV_CMD_MAX: highest used command number + */ BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1 };
/** * enum batadv_tp_meter_reason - reason of a tp meter test run stop - * @BATADV_TP_REASON_COMPLETE: sender finished tp run - * @BATADV_TP_REASON_CANCEL: sender was stopped during run - * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't - * answer - * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit - * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already - * ongoing - * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory - * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface - * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions */ enum batadv_tp_meter_reason { + /** + * @BATADV_TP_REASON_COMPLETE: sender finished tp run + */ BATADV_TP_REASON_COMPLETE = 3, + + /** + * @BATADV_TP_REASON_CANCEL: sender was stopped during run + */ BATADV_TP_REASON_CANCEL = 4, + /* error status >= 128 */ + + /** + * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or + * didn't answer + */ BATADV_TP_REASON_DST_UNREACHABLE = 128, + + /** + * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit + */ BATADV_TP_REASON_RESEND_LIMIT = 129, + + /** + * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node + * already ongoing + */ BATADV_TP_REASON_ALREADY_ONGOING = 130, + + /** + * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory + */ BATADV_TP_REASON_MEMORY_ERROR = 131, + + /** + * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface + */ BATADV_TP_REASON_CANT_SEND = 132, + + /** + * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions + */ BATADV_TP_REASON_TOO_MANY = 133, };