commits

commits@lists.open-mesh.org

1 participants
12405 discussions

[doc] backup-redmine/2019-09-14, master: doc: batman-adv/Gateways: don't use the name TQ for the metric of B.A.T.M.A.N V (17955d7)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

1 0

[doc] backup-redmine/2019-09-14, master: doc: batman-adv/Gateways: speed is in kbit/s (0472350)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

Repository : ssh://git@open-mesh.org/doc On branches: backup-redmine/2019-09-14,master >--------------------------------------------------------------- commit 0472350aaf6085c8e6dfc2e05f4f6870d96a406c Author: Ruben Barkow <freifunk(a)r.z11.de> Date: Sat Nov 24 13:18:05 2018 +0000 doc: batman-adv/Gateways: speed is in kbit/s >--------------------------------------------------------------- 0472350aaf6085c8e6dfc2e05f4f6870d96a406c batman-adv/Gateways.textile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/batman-adv/Gateways.textile b/batman-adv/Gateways.textile index 44849d9..d80c11b 100644 --- a/batman-adv/Gateways.textile +++ b/batman-adv/Gateways.textile @@ -63,7 +63,7 @@ batctl gw_mode client 20 All available gateway selection classes are thoroughly explained in the "batctl manpage":https://downloads.open-mesh.org/batman/manpages/batctl.8.html. -With B.A.T.M.A.N. V this behavior changed: the value is measured in kbit, for example, if gw_sel_class is set to 1500 the gateway is selected if the minimum of GW advertised throughput and the path throughput is 1500 kbit faster than the currently selected gateway. +With B.A.T.M.A.N. V this behavior changed: the value is measured in kbit/s, for example, if gw_sel_class is set to 1500 the gateway is selected if the minimum of GW advertised throughput and the path throughput is 1500 kbit/s faster than the speed of the currently selected gateway. h3. gateway status

1 0

[doc] backup-redmine/2019-09-14, master: doc: batman-adv/Faq: Add warning message to vlan problem (5203200)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

1 0

[doc] backup-redmine/2019-09-14, master: doc: open-mesh/News-draft (4be08de)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

1 0

[doc] backup-redmine/2019-09-14, master: doc: alfred/Wiki (c80c794)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

1 0

[doc] backup-redmine/2019-09-14, master: doc: batman-adv/Batman-adv-openwrt-config: document how to add other hardifs to the same meshif (2708a86)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

Repository : ssh://git@open-mesh.org/doc On branches: backup-redmine/2019-09-14,master >--------------------------------------------------------------- commit 2708a8641629eb6f03caea2ae5b690d7678378dc Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Feb 23 08:50:45 2019 +0000 doc: batman-adv/Batman-adv-openwrt-config: document how to add other hardifs to the same meshif >--------------------------------------------------------------- 2708a8641629eb6f03caea2ae5b690d7678378dc batman-adv/Batman-adv-openwrt-config.textile | 81 +++++++++++++++------------- 1 file changed, 44 insertions(+), 37 deletions(-) diff --git a/batman-adv/Batman-adv-openwrt-config.textile b/batman-adv/Batman-adv-openwrt-config.textile index 8c668b4..613b7a2 100644 --- a/batman-adv/Batman-adv-openwrt-config.textile +++ b/batman-adv/Batman-adv-openwrt-config.textile @@ -13,16 +13,16 @@ With batman-adv 2013.0.0 the OpenWrt package was converted to integrate with Ope The wireless configuration in '/etc/config/wireless': <pre> config wifi-device 'radio0' - option [..] + option [..] config wifi-iface 'wmesh' - option device 'radio0' - option ifname 'adhoc0' - option network 'batnet' - option mode 'adhoc' - option ssid 'mesh' - option 'mcast_rate' '18000' - option bssid '02:CA:FE:CA:CA:40' + option device 'radio0' + option ifname 'adhoc0' + option network 'bat0_hardif_wlan' + option mode 'adhoc' + option ssid 'mesh' + option 'mcast_rate' '18000' + option bssid '02:CA:FE:CA:CA:40' </pre> It is assumed you configured the 'wifi-device' depending on your requirements and your hardware. The interesting part is the 'wifi-iface' stanza with its options: @@ -36,20 +36,27 @@ It is assumed you configured the 'wifi-device' depending on your requirements an More information can be found in the "OpenWrt wireless configuration":https://wiki.openwrt.org/doc/uci/wireless -The network configuration in '/etc/config/network' allows to specify batman-adv as protocol and the batman-adv interface name: +The network configuration in '/etc/config/network' allows to specify batman-adv as protocol and the batman-adv interface name. It is also possible to add other interfaces (like eth0) to the same mesh interface: <pre> -config interface 'batnet' - option mtu '1532' - option proto 'batadv' - option mesh 'bat0' +config interface 'bat0_hardif_wlan' + option mtu '1532' + option proto 'batadv' + option mesh 'bat0' + + +config interface 'bat0_hardif_eth0' + option mtu '1532' + option proto 'batadv' + option mesh 'bat0' + option ifname 'eth0' </pre> The batman-adv configuration in '/etc/config/batman-adv' only contains the batman-adv specific options: <pre> config mesh 'bat0' - option 'aggregated_ogms' - option 'ap_isolation' - option [..] + option 'aggregated_ogms' + option 'ap_isolation' + option [..] </pre> *Since batman-adv 2014.2.0* VLAN specific options have to be configured in a separated stanza having protocol 'batadv_vlan'. @@ -68,11 +75,11 @@ Any VLAN specific option can still be listed in the batman-adv configuration for *Since batman-adv 2016.1* The routing algorithm can be configured via the network configuration in '/etc/config/network' to override the kernel module's default: <pre> -config interface 'batnet' - option mtu '1532' - option proto 'batadv' - option mesh 'bat0' - option routing_algo 'BATMAN_V' +config interface 'bat0_hardif_wlan' + option mtu '1532' + option proto 'batadv' + option mesh 'bat0' + option routing_algo 'BATMAN_V' </pre> h2. Batman-adv 2012.4.0 and older @@ -80,16 +87,16 @@ h2. Batman-adv 2012.4.0 and older The wifi interface needs to be configured in '/etc/config/wireless': <pre> config wifi-device 'radio0' - option [..] + option [..] config wifi-iface 'wmesh' - option device 'radio0' - option ifname 'adhoc0' - option network 'batnet' - option mode 'adhoc' - option ssid 'mesh' - option 'mcast_rate' '18000' - option bssid '02:CA:FE:CA:CA:40' + option device 'radio0' + option ifname 'adhoc0' + option network 'bat0_hardif_wlan' + option mode 'adhoc' + option ssid 'mesh' + option 'mcast_rate' '18000' + option bssid '02:CA:FE:CA:CA:40' </pre> It is assumed you configured the 'wifi-device' depending on your requirements and your hardware. The interesting part is the 'wifi-iface' stanza with its options: @@ -105,10 +112,10 @@ More information can be found in the "OpenWrt wireless configuration":https://wi Configure the MTU in '/etc/config/network' <pre> -config interface 'batnet' - option ifname 'adhoc0' - option mtu '1528' - option proto 'none' +config interface 'bat0_hardif_wlan' + option ifname 'adhoc0' + option mtu '1528' + option proto 'none' </pre> The stanza's name 'mesh' as well as the ifname option have to match your wireless configuration. @@ -116,10 +123,10 @@ The stanza's name 'mesh' as well as the ifname option have to match your wireles Batman-adv is configured through its own configuration in '/etc/config/batman-adv': <pre> config mesh 'bat0' - option interfaces 'adhoc0' - option 'aggregated_ogms' - option 'ap_isolation' - option [..] + option interfaces 'adhoc0' + option 'aggregated_ogms' + option 'ap_isolation' + option [..] </pre> The 'interfaces' option is the key element here, as it tells batman-adv which interface(s) to run on. All the other options enable / disable / tweak all the batman-adv features you can also access at runtime through batctl. \ No newline at end of file

1 0

[doc] backup-redmine/2019-09-14, master: doc: open-mesh/News-draft: add newest changes for 2019.0 and abstract (e1f33a8)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

1 0

[doc] backup-redmine/2019-09-14, master: doc: batman-adv/Compatversion (8e18f5f)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

1 0

[doc] backup-redmine/2019-09-14, master: doc: batman-adv/ELP (5bb94e0)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

1 0

[doc] master: Merge branch 'backup-redmine/2018-08-24' (a6e0a89)
by postmaster＠open-mesh.org 15 Sep '19

15 Sep '19

Repository : ssh://git@open-mesh.org/doc On branch : master >--------------------------------------------------------------- commit a6e0a898a29263a3775793490847b4d75069a46d Merge: e1ec745 3785dfe Author: Sven Eckelmann <sven(a)narfation.org> Date: Sun Sep 15 08:27:18 2019 +0200 Merge branch 'backup-redmine/2018-08-24' >--------------------------------------------------------------- batman-adv/DAT_DHCP_Snooping.rst | 191 +++++++++ batman-adv/Faq.rst | 2 +- batman-adv/Quick-start-guide.rst | 38 +- batman-adv/Troubleshooting.rst | 9 +- batman-adv/bcast-arp-req-gw.dia | Bin 0 -> 1478 bytes batman-adv/bcast-arp-req-gw.svg | 121 ++++++ ...fda-BCAST-ARP-REQUEST-@.kbits-1d.2018-04-06.png | Bin 0 -> 54312 bytes ...fda-BCAST-ARP-REQUEST-@.kbits-1d.2018-05-07.png | Bin 0 -> 56479 bytes batman-adv/ffda-BCAST.1d.2018-05-10.png | Bin 0 -> 65081 bytes batmand/Faq.rst | 2 +- open-mesh/Download.rst | 30 +- open-mesh/Emulation_Debug.rst | 425 +++++++++++---------- open-mesh/News-draft.rst | 139 ++++--- open-mesh/ResearchProposals.rst | 92 +---- open-mesh/hub-gluon.sh | 42 ++ open-mesh/run.sh | 5 +- 16 files changed, 719 insertions(+), 377 deletions(-) Diff suppressed because of size. To see it, use: git diff-tree --patch-with-stat --no-color --find-copies-harder --ignore-space-at-eol --cc a6e0a898a29263a3775793490847b4d75069a46d

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

commits