commits July 2020

commits@lists.open-mesh.org

1 participants
76 discussions

[doc] backup-redmine/2020-07-12,master: doc: batman-adv/Fragmentation-technical (cb4fe56)
by postmaster＠open-mesh.org 12 Jul '20

12 Jul '20

Repository : ssh://git@diktynna/doc On branches: backup-redmine/2020-07-12,master >--------------------------------------------------------------- commit cb4fe5694dc7fb5930490d7d6f3f80292ecce4b1 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Jun 20 21:16:05 2020 +0000 doc: batman-adv/Fragmentation-technical >--------------------------------------------------------------- cb4fe5694dc7fb5930490d7d6f3f80292ecce4b1 batman-adv/Fragmentation-technical.textile | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/batman-adv/Fragmentation-technical.textile b/batman-adv/Fragmentation-technical.textile index 1ca1c66..448e08c 100644 --- a/batman-adv/Fragmentation-technical.textile +++ b/batman-adv/Fragmentation-technical.textile @@ -61,13 +61,12 @@ h2. Configuration First of all, fragmentation shouldn't be needed (except for tt-tables, see below). It is a fix for drivers/hardware that is unable to handle MTU's greater than 1528 bytes, it is slow (due to increase is packets), and is susceptible to packet loss. -It can be enabled and disabled via batctl: +It can be turned on and off via batctl: <pre> -% batctl meshif bat0 fragmentation 1 # enable (default) -% batctl meshif bat0 fragmentation 0 # disable +% batctl meshif bat0 fragmentation 1 # on (default) +% batctl meshif bat0 fragmentation 0 # off </pre> - h2. Limitations If an intermediate node with an unexpectedly lower MTU exists, this scheme breaks. In the scenario "A <-> B <-> C", where A and C have MTU=1550 and B has MTU=1000 bytes, B cannot respond with nor forward very-big-full-tables from A to C. At the moment, batman-adv simply forwards the requests and hopes for the best.

1 0

[doc] backup-redmine/2020-07-12,master: doc: batman-adv/DistributedArpTable (1fe475a)
by postmaster＠open-mesh.org 12 Jul '20

12 Jul '20

Repository : ssh://git@diktynna/doc On branches: backup-redmine/2020-07-12,master >--------------------------------------------------------------- commit 1fe475a6d108bbffaf0da40e7624a83cae649329 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Jun 20 21:16:33 2020 +0000 doc: batman-adv/DistributedArpTable >--------------------------------------------------------------- 1fe475a6d108bbffaf0da40e7624a83cae649329 batman-adv/DistributedArpTable.textile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/batman-adv/DistributedArpTable.textile b/batman-adv/DistributedArpTable.textile index f77e1f8..a0f3d01 100644 --- a/batman-adv/DistributedArpTable.textile +++ b/batman-adv/DistributedArpTable.textile @@ -16,7 +16,8 @@ DAT will not use any broadcast packet. Node A gets the ARP request, computes the h2. Enable/Disable DAT -DAT can be enabled/disabled in two different manners: +DAT can be turned on/off in two different manners: + # at compile time # at runtime

1 0

[doc] backup-redmine/2020-07-12,master: doc: open-mesh/Gsoc2011-ideas (e970391)
by postmaster＠open-mesh.org 12 Jul '20

12 Jul '20

Repository : ssh://git@diktynna/doc On branches: backup-redmine/2020-07-12,master >--------------------------------------------------------------- commit e97039198fc0f9025abb22e4e70ff92fcbb5a049 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Jun 20 20:53:52 2020 +0000 doc: open-mesh/Gsoc2011-ideas >--------------------------------------------------------------- e97039198fc0f9025abb22e4e70ff92fcbb5a049 open-mesh/Gsoc2011-ideas.textile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/open-mesh/Gsoc2011-ideas.textile b/open-mesh/Gsoc2011-ideas.textile index 1ba7446..7d68a72 100644 --- a/open-mesh/Gsoc2011-ideas.textile +++ b/open-mesh/Gsoc2011-ideas.textile @@ -128,4 +128,4 @@ h2. misc * multiple interface support in Mesh 3D * ap51flash GUI; ap51flash multi-flash on single interface * Android/Maemo/Meego porting + _maintenance_! -* Cooperative work with Pidgin guys? (video/audio/file-transfer/bonjour in pidgin and improving its + batman-adv's combined performance in a mesh network?) \ No newline at end of file +* Cooperative work with Pidgin persons? (video/audio/file-transfer/bonjour in pidgin and improving its + batman-adv's combined performance in a mesh network?) \ No newline at end of file

1 0

[doc] backup-redmine/2020-07-12,master: doc: batman-adv/LinuxNextTracking (5b3fc05)
by postmaster＠open-mesh.org 12 Jul '20

12 Jul '20

Repository : ssh://git@diktynna/doc On branches: backup-redmine/2020-07-12,master >--------------------------------------------------------------- commit 5b3fc0526fcf54e8fbf84ef3ffeb07611837a3a7 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Jun 20 20:55:12 2020 +0000 doc: batman-adv/LinuxNextTracking >--------------------------------------------------------------- 5b3fc0526fcf54e8fbf84ef3ffeb07611837a3a7 batman-adv/LinuxNextTracking.textile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/batman-adv/LinuxNextTracking.textile b/batman-adv/LinuxNextTracking.textile index b6eb3e9..c20a75e 100644 --- a/batman-adv/LinuxNextTracking.textile +++ b/batman-adv/LinuxNextTracking.textile @@ -58,4 +58,4 @@ To get it really to send something we have to add the mail information to the ho emailprefix = "[linux-next] " </pre> -Now the guy with my-address(a)foobar.com will receive our and foreign patches which touches net/batman-adv in linux-next... each day at 0:15 (or at least once a day). \ No newline at end of file +Now the owner of my-address(a)foobar.com will receive our and foreign patches which touches net/batman-adv in linux-next... each day at 0:15 (or at least once a day). \ No newline at end of file

1 0

[doc] backup-redmine/2020-07-12,master: doc: open-mesh/Kernel_debugging_with_kgdb (7cf05fd)
by postmaster＠open-mesh.org 12 Jul '20

12 Jul '20

Repository : ssh://git@diktynna/doc On branches: backup-redmine/2020-07-12,master >--------------------------------------------------------------- commit 7cf05fd169f1212470760e00f5bb9cd716a4eacc Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Jun 20 21:00:10 2020 +0000 doc: open-mesh/Kernel_debugging_with_kgdb >--------------------------------------------------------------- 7cf05fd169f1212470760e00f5bb9cd716a4eacc open-mesh/Kernel_debugging_with_kgdb.textile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/open-mesh/Kernel_debugging_with_kgdb.textile b/open-mesh/Kernel_debugging_with_kgdb.textile index 73264bb..ba1c981 100644 --- a/open-mesh/Kernel_debugging_with_kgdb.textile +++ b/open-mesh/Kernel_debugging_with_kgdb.textile @@ -6,16 +6,16 @@ In best case, the system can be "debugged using JTAG":https://openwrt.org/docs/t h2. Preparing OpenWrt -h3. Disabling watchdog +h3. Turning off watchdog -Most CPUs have some kind of watchdog integrated. They can often be disabled and are often inactive when the watchdog driver is not loaded. For example, ath79/ar71xx can be build without the internal watchdog support by changing in <code>target/linux/{ar71xx,ath79}/config-*</code>: +Most CPUs have some kind of watchdog integrated. They can often be turned off and are often inactive when the watchdog driver is not loaded. For example, ath79/ar71xx can be build without the internal watchdog support by changing in <code>target/linux/{ar71xx,ath79}/config-*</code>: <pre><code class="diff"> -CONFIG_ATH79_WDT=y +# CONFIG_ATH79_WDT is not set </code></pre> -Unfortunately, there are also external watchdog chips which cannot be disabled. They have to be manually triggered regularly during the debugging process to prevent a sudden reboot. The details depend on the actual hardware but it often ends up in writing to a specific (GPIO control/set/clear) register. +Unfortunately, there are also external watchdog chips which cannot be turned off. They have to be manually triggered regularly during the debugging process to prevent a sudden reboot. The details depend on the actual hardware but it often ends up in writing to a specific (GPIO control/set/clear) register. h3. Enabling KGDB in kernel @@ -243,7 +243,7 @@ index 3b884f9e79..9b0149faca 100644 h2. Start debugging session -h3. Disable kASLR +h3. Turning off kASLR The kernel address space layout randomization complicates the resolving of addresses of symbols. It is highly recommended to start the kernel with the parameter "nokaslr". For example by adding it to <code>CONFIG_CMDLINE</code> or by adjusting the <code>bootargs</code> in the bootloader. It should be checked in <code>/proc/cmdline</code> whether it was really booted with this parameter.

1 0

[doc] backup-redmine/2020-07-12,master: doc: batmand/BATMAN_Daemon_HowTo (6aac53d)
by postmaster＠open-mesh.org 12 Jul '20

12 Jul '20

Repository : ssh://git@diktynna/doc On branches: backup-redmine/2020-07-12,master >--------------------------------------------------------------- commit 6aac53d33369d78794a802dc75ab1b1c7e870783 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Jun 20 21:02:19 2020 +0000 doc: batmand/BATMAN_Daemon_HowTo >--------------------------------------------------------------- 6aac53d33369d78794a802dc75ab1b1c7e870783 batmand/BATMAN_Daemon_HowTo.textile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/batmand/BATMAN_Daemon_HowTo.textile b/batmand/BATMAN_Daemon_HowTo.textile index b7cb912..721543a 100644 --- a/batmand/BATMAN_Daemon_HowTo.textile +++ b/batmand/BATMAN_Daemon_HowTo.textile @@ -146,14 +146,14 @@ h4(#d-debug-level). @-d@ debug level The debug level can be set to five values. -* 0 - debug disabled (default) +* 0 - debug turned off (default) * 1 - list neighbors * 2 - list gateways * 3 - observe batmand * 4 - observe batmand (very verbose) * 5 - memory debug / cpu usage -Note that debug level 5 can be disabled at compile time. +Note that debug level 5 can be turned off at compile time. For example, you can run in normal start: @@ -276,7 +276,7 @@ Since no topology database is computed by the protocol an additional solution to h4(#policy-routing-script). @--policy-routing-script@ -This option disables the policy routing feature of batmand - all routing changes are send to the script which can make use of this information or not. Firmware and package maintainers can use this option to tightly integrate batmand into their own routing policies. This option is only available in daemon mode. +This option turns off the policy routing feature of batmand - all routing changes are send to the script which can make use of this information or not. Firmware and package maintainers can use this option to tightly integrate batmand into their own routing policies. This option is only available in daemon mode. h2(#troubleshooting). Troubleshooting

1 0

[doc] backup-redmine/2020-07-12,master: doc: batman-adv/Kmalloc-kmem-cache-tests (2d5cd62)
by postmaster＠open-mesh.org 12 Jul '20

12 Jul '20

Repository : ssh://git@diktynna/doc On branches: backup-redmine/2020-07-12,master >--------------------------------------------------------------- commit 2d5cd62667eda0601fcdfb5c9080d33e8a9bdd17 Author: Sven Eckelmann <sven(a)narfation.org> Date: Sat Jun 20 21:09:05 2020 +0000 doc: batman-adv/Kmalloc-kmem-cache-tests >--------------------------------------------------------------- 2d5cd62667eda0601fcdfb5c9080d33e8a9bdd17 batman-adv/Kmalloc-kmem-cache-tests.textile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/batman-adv/Kmalloc-kmem-cache-tests.textile b/batman-adv/Kmalloc-kmem-cache-tests.textile index 78253d5..9c08c1b 100644 --- a/batman-adv/Kmalloc-kmem-cache-tests.textile +++ b/batman-adv/Kmalloc-kmem-cache-tests.textile @@ -12,7 +12,7 @@ Some information about kmem-cache can be found "here":https://static.lwn.net/ima The idea of these tests is to feed one 32MB RAM, embedded device with as many global TT entries as possible from a second, more powerful device. The test scripts continuously fetch the number of global TT entries until the embedded device reboots due to an Out-of-Memory error. -We then compare this count with various configurations, for instance with kmalloc() vs. kmem-cache-alloc() vs. kmem-cache-alloc(SLAB_HWCACHE_ALIGN). But also with wifi enabled/disabled or full global TT dump + count vs. direct, global TT count access. +We then compare this count with various configurations, for instance with kmalloc() vs. kmem-cache-alloc() vs. kmem-cache-alloc(SLAB_HWCACHE_ALIGN). But also with wifi turned on/off or full global TT dump + count vs. direct, global TT count access. h2. 2) Test setup @@ -66,15 +66,15 @@ Gluon, by default, provides both a mesh interface (either IBSS or 802.11s w/o fw Tests were performed once with these two wifi interfaces enabled, but hidden. And once with no wifi interfaces (UCI wifi interface sections disabled). -h3. 3.3) Bridge FDB (Forwarding Database) enabled vs. disabled ("nofdb" run) +h3. 3.3) Bridge FDB (Forwarding Database) turned on vs. off ("nofdb" run) By default, the bridge keeps track of behind which bridge port which MAC address can be found. This information is stored in the so called forwarding database, or FDB for short. This is similar to how batman-adv stores which client and according MAC address can be found on which mesh node. And by that also not strictly necessary for a bridged mesh network to function correctly. -The bridge allows to disable the FDB learning on specific ports as well as to configure on which ports ethernet frames with an unknown destination MAC should be flooded. +The bridge allows to turn off the FDB learning on specific ports as well as to configure on which ports ethernet frames with an unknown destination MAC should be flooded. -The "nofdb" test run disables learning on the bat0 bridge port and lets the bridge simply flood frames with unknown destination to bat0. Then batman-adv will determine via its global translation table if an appropriate host in the mesh exists and if so, forwards the frame further. +The "nofdb" test run turns off learning on the bat0 bridge port and lets the bridge simply flood frames with unknown destination to bat0. Then batman-adv will determine via its global translation table if an appropriate host in the mesh exists and if so, forwards the frame further. h3. 3.4) Full Global Translation Table Dump vs. Count Dump only ("notg" run)

1 0

[batctl] master: alfred:Sync batman-adv uapi headers (2c893e3)
by postmaster＠open-mesh.org 08 Jul '20

08 Jul '20

Repository : ssh://git@diktynna/batctl On branch : master >--------------------------------------------------------------- commit 2c893e3661528916d50acc221e869a2dd2a7e2f2 Author: Sven Eckelmann <sven(a)narfation.org> Date: Wed Jul 8 06:46:15 2020 +0200 alfred:Sync batman-adv uapi headers Sync headers after following batman-adv changes: * batman-adv: Fix typos and grammar in documentation * batman-adv: Introduce a configurable per interface hop penalty Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 2c893e3661528916d50acc221e869a2dd2a7e2f2 batadv_packet.h | 50 +++++++++++++++++++++++++------------------------- batman_adv.h | 7 ++++--- 2 files changed, 29 insertions(+), 28 deletions(-) diff --git a/batadv_packet.h b/batadv_packet.h index 0ae34c8..9c8604c 100644 --- a/batadv_packet.h +++ b/batadv_packet.h @@ -72,8 +72,8 @@ enum batadv_subtype { /** * enum batadv_iv_flags - flags used in B.A.T.M.A.N. IV OGM packets - * @BATADV_NOT_BEST_NEXT_HOP: flag is set when ogm packet is forwarded and was - * previously received from someone else than the best neighbor. + * @BATADV_NOT_BEST_NEXT_HOP: flag is set when the ogm packet is forwarded and + * was previously received from someone other than the best neighbor. * @BATADV_PRIMARIES_FIRST_HOP: flag unused. * @BATADV_DIRECTLINK: flag is for the first hop or if rebroadcasted from a * one hop neighbor on the interface where it was originally received. @@ -195,8 +195,8 @@ struct batadv_bla_claim_dst { /** * struct batadv_ogm_packet - ogm (routing protocol) packet * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @flags: contains routing relevant flags - see enum batadv_iv_flags * @seqno: sequence identification * @orig: address of the source node @@ -247,7 +247,7 @@ struct batadv_ogm2_packet { /** * struct batadv_elp_packet - elp (neighbor discovery) packet * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header + * @version: batman-adv protocol version, part of the general header * @orig: originator mac address * @seqno: sequence number * @elp_interval: currently used ELP sending interval in ms @@ -265,15 +265,15 @@ struct batadv_elp_packet { /** * struct batadv_icmp_header - common members among all the ICMP packets * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @msg_type: ICMP packet type * @dst: address of the destination node * @orig: address of the source node * @uid: local ICMP socket identifier * @align: not used - useful for alignment purposes only * - * This structure is used for ICMP packets parsing only and it is never sent + * This structure is used for ICMP packet parsing only and it is never sent * over the wire. The alignment field at the end is there to ensure that * members are padded the same way as they are in real packets. */ @@ -291,8 +291,8 @@ struct batadv_icmp_header { /** * struct batadv_icmp_packet - ICMP packet * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @msg_type: ICMP packet type * @dst: address of the destination node * @orig: address of the source node @@ -315,8 +315,8 @@ struct batadv_icmp_packet { /** * struct batadv_icmp_tp_packet - ICMP TP Meter packet * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @msg_type: ICMP packet type * @dst: address of the destination node * @orig: address of the source node @@ -358,8 +358,8 @@ enum batadv_icmp_tp_subtype { /** * struct batadv_icmp_packet_rr - ICMP RouteRecord packet * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @msg_type: ICMP packet type * @dst: address of the destination node * @orig: address of the source node @@ -397,8 +397,8 @@ struct batadv_icmp_packet_rr { /** * struct batadv_unicast_packet - unicast packet for network payload * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @ttvn: translation table version number * @dest: originator destination of the unicast packet */ @@ -433,8 +433,8 @@ struct batadv_unicast_4addr_packet { /** * struct batadv_frag_packet - fragmented packet * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @dest: final destination used when routing fragments * @orig: originator of the fragment used when merging the packet * @no: fragment number within this sequence @@ -467,8 +467,8 @@ struct batadv_frag_packet { /** * struct batadv_bcast_packet - broadcast packet for network payload * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @reserved: reserved byte for alignment * @seqno: sequence identification * @orig: originator of the broadcast packet @@ -488,10 +488,10 @@ struct batadv_bcast_packet { /** * struct batadv_coded_packet - network coded packet * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @first_source: original source of first included packet - * @first_orig_dest: original destinal of first included packet + * @first_orig_dest: original destination of first included packet * @first_crc: checksum of first included packet * @first_ttvn: tt-version number of first included packet * @second_ttl: ttl of second packet @@ -523,8 +523,8 @@ struct batadv_coded_packet { /** * struct batadv_unicast_tvlv_packet - generic unicast packet with tvlv payload * @packet_type: batman-adv packet type, part of the general header - * @version: batman-adv protocol version, part of the genereal header - * @ttl: time to live for this packet, part of the genereal header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header * @reserved: reserved field (for packet alignment) * @src: address of the source * @dst: address of the destination diff --git a/batman_adv.h b/batman_adv.h index 617c180..bb0ae94 100644 --- a/batman_adv.h +++ b/batman_adv.h @@ -69,7 +69,7 @@ enum batadv_tt_client_flags { /** * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be - * part of the network but no nnode has already announced it + * part of the network but no node has already announced it */ BATADV_TT_CLIENT_TEMP = (1 << 11), }; @@ -131,7 +131,7 @@ enum batadv_gw_modes { /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */ BATADV_GW_MODE_CLIENT, - /** @BATADV_GW_MODE_SERVER: announce itself as gatway server */ + /** @BATADV_GW_MODE_SERVER: announce itself as gateway server */ BATADV_GW_MODE_SERVER, }; @@ -427,7 +427,8 @@ enum batadv_nl_attrs { /** * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied - * to an originator message's tq-field on every hop. + * to an originator message's tq-field on every hop and/or per + * hard interface */ BATADV_ATTR_HOP_PENALTY,

1 0

[alfred] master: batctl: Sync batman-adv netlink uapi header (921940b)
by postmaster＠open-mesh.org 08 Jul '20

08 Jul '20

Repository : ssh://git@diktynna/alfred On branch : master >--------------------------------------------------------------- commit 921940b33575d61747097d04712b0d4892db68c9 Author: Sven Eckelmann <sven(a)narfation.org> Date: Wed Jul 8 06:46:16 2020 +0200 batctl: Sync batman-adv netlink uapi header Sync headers after following batman-adv changes: * batman-adv: Fix typos and grammar in documentation * batman-adv: Introduce a configurable per interface hop penalty Signed-off-by: Sven Eckelmann <sven(a)narfation.org> >--------------------------------------------------------------- 921940b33575d61747097d04712b0d4892db68c9 batman_adv.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/batman_adv.h b/batman_adv.h index 617c180..bb0ae94 100644 --- a/batman_adv.h +++ b/batman_adv.h @@ -69,7 +69,7 @@ enum batadv_tt_client_flags { /** * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be - * part of the network but no nnode has already announced it + * part of the network but no node has already announced it */ BATADV_TT_CLIENT_TEMP = (1 << 11), }; @@ -131,7 +131,7 @@ enum batadv_gw_modes { /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */ BATADV_GW_MODE_CLIENT, - /** @BATADV_GW_MODE_SERVER: announce itself as gatway server */ + /** @BATADV_GW_MODE_SERVER: announce itself as gateway server */ BATADV_GW_MODE_SERVER, }; @@ -427,7 +427,8 @@ enum batadv_nl_attrs { /** * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied - * to an originator message's tq-field on every hop. + * to an originator message's tq-field on every hop and/or per + * hard interface */ BATADV_ATTR_HOP_PENALTY,

1 0

[linux-merge]linux integration; annotated tag, v5.8-rc4, created. v5.8-rc4
by postmaster＠open-mesh.org 06 Jul '20

06 Jul '20

The annotated tag, v5.8-rc4 has been created at 5d6c002b4f4bf2220e1bbf297571062c4deff969 (tag) tagging dcb7fd82c75ee2d6e6f9d8cc71c52519ed52e258 (commit) replaces v5.8-rc3 tagged by Linus Torvalds on Sun Jul 5 16:20:22 2020 -0700 - Shortlog ------------------------------------------------------------ Linux 5.8-rc4 -----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8CYDYeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcQkH/2vOsPf79yWtsc7x hd2LpCPfrm7T1xlQcYcXbEbyRI8sqPmguixO8pRI1ePl2lBZ7KurfyeYgYZNGpFU t74Ph6A6dSWoCgO68Genm/SQuK8ic6o9n1Vr8tDsGDp5KlHWNaweq4JwHrsPmO1T cI0PR/ClAhLG8cQZ4x988Es5HTNGY17XK27e+M/zKYxSMGY2NRdJBGQIq964i5Q8 2d9G0rtVCaVDzgjrLwaFm6RBu21Il7HV6KsBsacyTFiL1ywx2vnUHzeZQyvuJSOQ 4YpLo9v4tBP10WHC50LRStZyO0qRwPVd/Yl7fL4R/CKsJT9H4uiwasVoEBVSL/k6 CUn3JL0= =P/Vx -----END PGP SIGNATURE----- ----------------------------------------------------------------------- -- linux integration

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

commits July 2020